Multi-functional chitosan-based nanoparticles for drug delivery: Recent advanced insight into cancer therapy

Cancer therapy continues to be a major global concern, with conventional treatments suffering from low efficacy, untargeted drug delivery, and severe side effects. Recent research in nanomedicine suggests that nanoparticles' unique physicochemical properties can be leveraged to surmount the limitations of conventional cancer treatment. Chitosan-based nanoparticles have gained significant attention due to their high drug-carrying capacity, non-toxicity, biocompatibility, and long circulation time. Chitosan is utilized in cancer therapies as a carrier to accurately deliver active ingredients to tumor sites. This review focuses on clinical studies and current market offerings of anticancer drugs. The unique nature of tumor microenvironments presents new opportunities for the development of smart drug delivery systems, and this review explores the design and preparation of chitosan-based smart nanoparticles. Further, we discuss the therapeutic efficacies of these nanoparticles based on various in vitro and in vivo findings. Finally, we present a forward-looking perspective on the challenges and prospects of chitosan-based nanoparticles in cancer therapy, intending to provide fresh ideas for advancing cancer treatment strategies.

Simultaneous estimation of Paclitaxel and Erlotinib in plasma by liquid chromatography/(+) electrospray tandem mass spectrometry: Application in formulation development and pharmacokinetics

The bio-analytical method was developed and validated for simultaneous detection and quantification of paclitaxel (PAC) and erlotinib (ERL) in plasma samples. The sample preparation process was accomplished by liquid -liquid extraction technique. The dried and reconstituted samples were subjected to chromatography on Discovery -C18 (50 × 4.6 × 5µm) column and a mobile phase, composed of a mixture of 0.1% formic acid in water: acetonitrile (70:30, v/v), in isocratic mode at a flow rate of 0.6 mL/min. Liquid chromatography coupled to tandem mass spectrometry detection in positive ion mode was selected to provide optimal selectivity and sensitivity. The mass transitions of erlotinib, erlotinib13C6, Paclitaxel and docetaxel were m/z 394.5→278.4, m/z 400.4→284.5, m/z 876.6→308.4 and m/z 830.0→304.0 respectively. The linearity in the calibration curves were obtained in the concentration range of 3.6 -1006.7 ng/ml (r ≥ 0.99) for erlotinib and 5.3 -1500.0 ng/mL for paclitaxel with a LLOQ (lower limit of quantification) of 3.6 and 5.3ng/ml respectively. The run time was achieved in 2.5 minutes only, for all the analytes.

Nanomedicine for increasing the oral bioavailability of cancer treatments

Abstract

Oral administration is an appealing route of delivering cancer treatments. However, the gastrointestinal tract is characterized by specific and efficient physical, chemical, and biological barriers that decrease the bioavailability of medications, including chemotherapeutics. In recent decades, the fields of material science and nanomedicine have generated several delivery platforms with high potential for overcoming multiple barriers associated to oral administration. This review describes the properties of several nanodelivery systems that improve the bioavailability of orally administered therapeutics, highlighting their advantages and disadvantages in generating successful anticancer oral nanomedicines.

Graphical Abstract

Oral delivery of protein-based therapeutics: Gastroprotective strategies, physiological barriers and in vitro permeability prediction

The number of biological molecules emerging as therapeutics is growing exponentially due to their higher specificity and tolerability profiles compared to small molecules. Despite this, their traditionally parenteral delivery often results in poor patient compliance and incomplete treatment. Current research is focussed on developing effective oral delivery strategies to facilitate administration of these biomolecules, however no universal method exists to simultaneously provide gastric protection as well as enhance transport across the gastrointestinal epithelium. Furthermore, for efficient formulation development it is imperative that we can reliably analyse permeability of biomolecules through the gastrointestinal tract, highlighting the importance of the continual development and ongoing evaluation of in vitro predictive permeability tools. Here, we review the physiological obstacles associated with peptide and protein delivery throughout the gastrointestinal tract. Furthermore, we highlight methods utilised to circumvent these barriers and promote improved intestinal permeability. Lastly, we explore in vitro models employed to predict epithelial transport. Key findings highlight the need to carefully understand gastrointestinal physiology, allowing specific engineering of oral delivery systems for biomolecules. Significant importance is placed upon understanding enzymatic degradation susceptibility as well as uptake mechanisms for particulate and protein-based therapeutics for the development of successful oral protein delivery platforms.

Cyclodextrin-based delivery systems for in vivo-tested anticancer therapies

Cyclodextrins (CDs) are naturally occurring macromolecules widely used as excipients on pharmaceutical formulations, evidencing a large spectrum of applications in the pharmaceutical industry. Their unique ability to act as molecular containers by entrapping a wide range of guest molecules in their internal cavity makes them a remarkable excipient to improve drug apparent solubility, stability, and bioavailability, and a valuable tool for the assembly of new drug delivery systems. These features are especially useful when it comes to chemotherapy, as most of the anticancer drugs present both low permeability and reduced water solubility. Therefore, guest-host inclusion complexes offer several potential advantages not only regarding the improvement of pharmaceutical formulations characteristics but also considering the reduction of drug toxic side effects. The combination of CDs with additional technologies and materials constitutes a potential strategy towards the development of advanced and multifunctional CD-based delivery systems. Paclitaxel, curcumin, camptothecin, doxorubicin, and cisplatin are among the most studied molecules with anticancer activities and have been successfully incorporated in such nanosystems. Exciting results using CDs and CD-based delivery systems have been obtained so far, paving the way towards the attainment of intelligent delivery systems to possibly address cancer therapeutics' unmet needs. In this review, a comprehensive exposition concerning in vivo-tested CD and CD-based delivery systems for anticancer therapy is undertaken. Additionally, the authors address the multivalent functionalities of CD-based delivery systems, namely the incorporation of active target ligands, stimuli-responsiveness components, surface functionalization, or further associations with other delivery systems, aiming at improved in vivo anticancer therapies. Graphical abstract.

Physico-Chemically Distinct Nanomaterials Synthesized from Derivates of a Poly(Anhydride) Diversify the Spectrum of Loadable Antibiotics

Recent advances in the field of nanotechnology such as nanoencapsulation offer new biomedical applications, potentially increasing the scope and efficacy of therapeutic drug delivery. In addition, the discovery and development of novel biocompatible polymers increases the versatility of these encapsulating nanostructures, enabling chemical properties of the cargo and vehicle to be adapted to specific physiological requirements. Here, we evaluate the capacity of various polymeric nanostructures to encapsulate various antibiotics of different classes, with differing chemical structure. Polymers were sourced from two separate derivatives of poly(methyl vinyl ether-alt-maleic anhydride) (PMVE/MA): an acid (PMVE/MA-Ac) and a monoethyl ester (PMVE/MA-Es). Nanoencapsulation of antibiotics was attempted through electrospinning, and nanoparticle synthesis through solvent displacement, for both polymers. Solvent incompatibilities prevented the nanoencapsulation of amikacin, neomycin and ciprofloxacin in PMVE/MA-Es nanofibers. However, all compounds were successfully loaded into PMVE/MA-Es nanoparticles. Encapsulation efficiencies in nanofibers reached approximately 100% in all compatible systems; however, efficiencies varied substantially in nanoparticles systems, depending on the tested compound (14%-69%). Finally, it was confirmed that both these encapsulation processes did not alter the antimicrobial activity of any tested antibiotic against Staphylococcus aureus and Escherichia coli, supporting the viability of these approaches for nanoscale delivery of antibiotics.

Nanoformulation strategies for improving intestinal permeability of drugs: A more precise look at permeability assessment methods and pharmacokinetic properties changes

The therapeutic efficacy of orally administered drugs is often restricted by their inherent limited oral bioavailability. Low water solubility, limited permeability through the intestinal barrier, instability in harsh environment of the gastrointestinal (GI) tract and being substrate of the efflux pumps and the cytochrome P450 (CYP) can impair oral drug bioavailability resulting in erratic and variable plasma drug profile. As more drugs with low membrane permeability are developed, new interest is growing to enhance their intestinal permeability and bioavailability. A wide variety of nanosystems have been developed to improve drug transport and absorption. Sufficient evidence exists to suggest that nanoparticles are able to increase the transepithelial transport of drug molecules. However, key questions remained unanswered. What types of nanoparticles are more efficient? What are preclinical (or clinical) achievements of each type of nanoformulation in terms of pharmacokinetic (PK) parameters? Addressing this issue in this paper, we have reviewed the current literature regarding permeability enhancement, permeability assessment methods and changes in PK parameters following administration of various nanoformulations. Although permeability enhancement by various nanoformulations holds great promise for oral drug delivery, many challenges still need to be addressed before development of more clinically successful nanoproducts.

Design of diffusion-controlled drug delivery devices for controlled release of Paclitaxel

Controlled drug delivery devices were predicted in a reverse engineering framework for the controlled release of Paclitaxel, an anti-cancer drug, widely used in the treatment of solid tumors. Using quantitative structure-property relationship models for mutual diffusion coefficients of the drug in biocompatible and biodegradable polymers and partition coefficients of the drug between polymers and blood, a framework was developed to predict optimal drug delivery devices for desired dosage regimens. The validation of the predicted mutual diffusion and partition coefficients using experimental data was reported in previous studies. Optimal design parameters along with selection of most appropriate polymers suitable for different dosage regimens, selected based on current clinical practice, were predicted for maximum bioavailability of the drug while maintaining the released drug concentration in blood within the therapeutic range. Reservoir and monolithic type of diffusion-controlled drug delivery devices of different shapes and sizes were predicted with different initial drug loadings and bioavailability for different dosage regimens. The effects of the released Paclitaxel from these devices on the tumor growth were also modeled using a previously reported mathematical pharmacokinetic-pharmacodynamic model. The proposed approach can easily be used to design other diffusion-controlled drug delivery devices.

Hemolytic and cellular toxicology of a sulfanilamide-based nonionic surfactant: a niosomal carrier for hydrophobic drugs

Biocompatible surfactants are of diverse pharmaceutical interest due to their ability to self-assemble into nano-particulate systems which can be used for single-step drug loading, based upon the hydrophobic-hydrophobic interaction between a hydrophobic drug and the lipophilic part of a surfactant molecule. However, surfactants are associated with cytotoxicity and hemolysis due to their amphiphilic interaction with cellular membranes. This study reports a novel membrane-compatible surfactant, synthesized from sulfanilamide and its self-micellization into niosomes. The surfactant was synthesized in a single step reaction via the introduction of an alkyl chain in the sulfanilamide moiety by conjugation with deconyl chloride. The synthesized surfactant (S-SDC) was characterized by ¹H and ¹³C NMR, mass spectrometry and single crystal XRD. The S-SDC niosomes were explored for drug delivery with clarithromycin as a model drug. The biocompatibility of the surfactant was investigated through hemolysis and cytotoxicity. The surfactant presented a very low critical micellar concentration (CMC) of 0.04 mM and entrapped 65% of the drug which was released in a sustained manner, over 12 h, at acidic and physiological pH. The vesicles were spherical in shape with 234 ± 3.61 nm mean diameter and a narrow size distribution. Niosomes were hemocompatible and nontoxic to cellular membrane. The results suggested the sulfanilamide based surfactant can be applied as a novel and cell membrane compatible niosomal drug delivery vehicle.

How to measure release from nanosized carriers?

Novel drug delivery systems exhibit great potential in the formulation of poorly soluble compounds but have also been applied to reduce side effects of highly active drug molecules. Despite all efforts, there are only few technologies available to investigate the in vitro release of next-generation nanotherapeutics. In the following, different approaches for testing the drug release from nanoparticles in the fields of formulation development and quality control will be discussed. A variety of methods is available, starting from dialysis-based equipment, in situ measurements, flow-through devices and sample and separate setups. If possible, these methods should enable a more rapid formulation development and quality control of nanosized carriers as well as improve the prediction of in vivo performance and clinical outcomes.

Poly(methyl vinyl ether-alt-maleic acid) and ethyl monoester as building polymers for drug-loadable electrospun nanofibers

New biomaterials are sought for the development of bioengineered nanostructures. In the present study, electrospun nanofibers have been synthesized by using poly(methyl vinyl ether-alt-maleic acid) and poly(methyl vinyl ether-alt-maleic ethyl monoester) (PMVEMA-Ac and PMVEMA-ES, respectively) as building polymers for the first time. To further functionalize these materials, nanofibers of PMVEMA-Ac and PMVEMA-ES containing a conjugated polyelectrolyte (HTMA-PFP, blue emitter, and HTMA-PFNT, red emitter) were achieved with both forms maintaining a high solid state fluorescence yield without altered morphology. Also, 5-aminolevulinic acid (5-ALA) was incorporated within these nanofibers, where it remained chemically stable. In all cases, nanofiber diameters were less than 150 nm as determined by scanning and transmission electron microscopy, and encapsulation efficiency of 5-ALA was 97 ± 1% as measured by high-performance liquid chromatography. Both polymeric matrices showed rapid release kinetics in vertical cells (Franz cells) and followed Higuchi kinetics. In addition, no toxicity of nanofibers, in the absence of light, was found in HaCaT and SW480 cell lines. Finally, it was shown that loaded 5-ALA was functional, as it was internalized by cells in nanofiber-treated cultures and served as a substrate for the generation of protoporphyrin IX, suggesting these pharmaceutical vehicles are suitable for photodynamic therapy applications.

Safety against nephrotoxicity in paclitaxel treatment: Oral nanocarrier as an effective tool in preclinical evaluation with marked in vivo antitumor activity

Oral paclitaxel (PTXL) formulations freed from cremophor^® EL (CrEL) is always in utmost demand by the cancerous patients due to toxicities associated with the currently marketed formulation. In our previous investigation [Int. J. Pharm. 2014; 460:131], we have developed an oral oil based nanocarrier for the lipophilic drug, PTXL to target bioavailability issue and patient compliance. Here, we report in vivo antitumor activity and 28-day sub-chronic toxicity of the developed PTXL nanoemulsion. It was observed that the apoptotic potential of oral PTXL nanoemulsion significantly inhibited the growth of solid tumor (59.2 ± 7.17%; p < 0.001) without causing any explicit toxicity. The 6.5 mg/kg and 3 mg/kg oral PTXL nanoemulsion dose did not cause any notable alteration in haematological, biochemical/structural characteristics during 28-day sub-chronic toxicity studies in the experimental mice. Whereas, the toxicity of 12.8 mg/kg body weight dose showed decrease in RBC, haemoglobin and neutrophil counts. In contrast, marketed PTXL (Taxol^®) was found to be comparatively more toxic to the experimental animals. Taxol^® treatment resulted glomerulonephritis in histopathological examination, which could be correlated with increased level of creatinine and associated nephrotoxicity. This investigations conclude that the developed oral nanoemulsion presents a viable therapeutics bio-system to step towards clinical application as well as substitute CrEL based PTXL formulations.

Acoustic cavitation induced generation of stabilizer-free, extremely stable reduced graphene oxide nanodispersion for efficient delivery of paclitaxel in cancer cells

Graphene is one of the highly explored nanomaterials due to its unique and extraordinary properties. In this study, by utilizing a hydrothermal reduction method, graphene oxide (GO) was successfully converted to reduced graphene oxide (RGO) without using any toxic reducing agents. Following this, with the use of ultrasonic cavitation, profoundly stable few layer thick RGO nanodispersion was generated without employing any stabilizers or surfactants. During ultrasonication, shockwaves from the collapse of bubbles cause a higher dispersing energy to the graphene nanosheets which surpass the forces of Van der Waal's and π-π stacking and thus pave the way to form a stable aqueous nanodispersion of graphene. Ultrasonication systems with different power intensity have been employed to determine the optimum conditions for obtaining the most stable RGO dispersion. The optimised conditions of ultrasonic treatments led to the development of a very stable reduced graphene oxide (RGO) aqueous dispersion. The stability was observed for two years and was analyzed by using Zetasizer by measuring the particle size and zeta potential at regular intervals and found to have exceptional stability. The excellent stability at physiological pH promotes its utilization in nano drug delivery application as a carrier for Paclitaxel (Ptx), an anticancer drug. The in vitro cytotoxicity analysis of Ptx loaded RGO nanodispersion by MTT assay performed on the cell lines revealed the potential of the nanodispersion as a suitable drug carrier. Studies on normal lung cells, MRC-5 and nasopharyngeal cancer cells, HK-1 supported the biocompatibility of RGO-Ptx towards normal cell line. This investigation shows the potential of exceptionally stable RGO-Ptx nanodispersion in nano drug delivery applications.

Direct in vivo evidence on the mechanism by which nanoparticles facilitate the absorption of a water insoluble, P-gp substrate

Here we examine the mechanisms by which nanoparticles enable the oral absorption of water-insoluble, P-glycoprotein efflux pump (P-gp) substrates, without recourse to P-gp inhibitors. Both 200nm paclitaxel N-(2-phenoxyacetyl)-6-O-glycolchitosan (GCPh) nanoparticles (GCPh-PTX) and a simulated Taxol formulation, facilitate drug dissolution in biorelevant media, unlike paclitaxel nanocrystals. Verapamil (40mgkg^-1) increased the oral absorption from low dose Taxol (6 or 10mgkg^-1) by 100%, whereas the oral absorption from high dose Taxol (20mgkg^-1) or low dose GCPh-PTX (6 or 10mgkg^-1) was largely unchanged by verapamil. There was virtually no absorption from control paclitaxel nanocrystals (20mgkg^-1). Imaging of ex-vivo rat ileum samples showed that fluorescently labelled GCPh nanoparticles are mucoadhesive and are taken up by ileum epithelial cells. GCPh nanoparticles were also found to open Caco-2 cell tight junctions. In conclusion, mucoadhesive, drug solubilising GCPh nanoparticles enable the oral absorption of paclitaxel via the saturation of the P-gp pump (by high local drug concentrations) and by particle uptake and tight junction opening mechanisms.

Milk-derived exosomes for oral delivery of paclitaxel

In this report milk-derived exosomes have been investigated for oral delivery of the chemotherapeutic drug paclitaxel (PAC) as an alternative to conventional i.v. therapy for improved efficacy and reduced toxicity. PAC-loaded exosomes (ExoPAC) were found to have a particle size of ~108 nm, a narrow particle size distribution (PDI ~0.190), zeta potential (~ -7 mV) and a practical loading efficiency of ~8%. Exosomes and ExoPAC exhibited excellent stability in the presence of simulated-gastrointestinal fluids, and during the storage at -80 °C. A sustained release of PAC was also observed up to 48 h in vitro using PBS (pH 6.8). Importantly, ExoPAC delivered orally showed significant tumor growth inhibition (60%; P<0.001) against human lung tumor xenografts in nude mice. Treatment with i.p. PAC at the same dose as ExoPAC, however, showed modest but statistically insignificant inhibition (31%). Moreover, ExoPAC demonstrated remarkably lower systemic and immunologic toxicities as compared to i.v. PAC.

In vitro evaluation of the genotoxicity of poly(anhydride) nanoparticles designed for oral drug delivery

In the last years, the development of nanomaterials has significantly increased due to the immense variety of potential applications in technological sectors, such as medicine, pharmacy and food safety. Focusing on the nanodevices for oral drug delivery, poly(anhydride) nanoparticles have received extensive attention due to their unique properties, such as their capability to develop intense adhesive interactions within the gut mucosa, their modifiable surface and their biodegradable and easy-to-produce profile. However, current knowledge of the possible adverse health effects as well as, toxicological information, is still exceedingly limited. Thus, we investigated the capacity of two poly(anhydride) nanoparticles, Gantrez^® AN 119-NP (GN-NP) and Gantrez^® AN 119 covered with mannosamine (GN-MA-NP), and their main bulk material (Gantrez^® AN 119-Polymer), to induce DNA damage and thymidine kinase (TK^+/-) mutations in L5178Y TK^+/- mouse lymphoma cells after 24h of exposure. The results showed that GN-NP, GN-MA-NP and their polymer did not induce DNA strand breaks or oxidative damage at concentrations ranging from 7.4 to 600μg/mL. Besides, the mutagenic potential of these nanoparticles and their polymer revealed no significant or biologically relevant gene mutation induction at concentrations up to 600μg/mL under our experimental settings. Considering the non-genotoxic effects of GN-NP and GN-MA-NP, as well as their exceptional properties, these nanoparticles are promising nanocarriers for oral medical administrations.

How to design the surface of peptide-loaded nanoparticles for efficient oral bioavailability?

The oral administration of proteins is a current challenge to be faced in the field of therapeutics. There is currently much interest in nanocarriers since they can enhance oral bioavailability. For lack of a clear definition, the key characteristics of nanoparticles have been highlighted. Specific surface area is one of these characteristics and represents a huge source of energy that can be used to control the biological fate of the carrier. The review discusses nanocarrier stability, mucus interaction and absorption through the intestinal epithelium. The protein corona, which has raised interest over the last decade, is also discussed. The universal ideal surface is a myth and over-coated carriers are not a solution either. Besides, common excipients can be useful on several targets. The suitable design should rather take into account the composition, structure and behavior of unmodified nanomaterials.

Oral absorption of peptides and nanoparticles across the human intestine: Opportunities, limitations and studies in human tissues

In this contribution, we review the molecular and physiological barriers to oral delivery of peptides and nanoparticles. We discuss the opportunities and predictivity of various in vitro systems with special emphasis on human intestine in Ussing chambers. First, the molecular constraints to peptide absorption are discussed. Then the physiological barriers to peptide delivery are examined. These include the gastric and intestinal environment, the mucus barrier, tight junctions between epithelial cells, the enterocytes of the intestinal epithelium, and the subepithelial tissue. Recent data from human proteome studies are used to provide information about the protein expression profiles of the different physiological barriers to peptide and nanoparticle absorption. Strategies that have been employed to increase peptide absorption across each of the barriers are discussed. Special consideration is given to attempts at utilizing endogenous transcytotic pathways. To reliably translate in vitro data on peptide or nanoparticle permeability to the in vivo situation in a human subject, the in vitro experimental system needs to realistically capture the central aspects of the mentioned barriers. Therefore, characteristics of common in vitro cell culture systems are discussed and compared to those of human intestinal tissues. Attempts to use the cell and tissue models for in vitro-in vivo extrapolation are reviewed.

Developments in Methods for Measuring the Intestinal Absorption of Nanoparticle-Bound Drugs

With the rapid development of nanotechnology, novel drug delivery systems comprising orally administered nanoparticles (NPs) have been paid increasing attention in recent years. The bioavailability of orally administered drugs has significant influence on drug efficacy and therapeutic dosage, and it is therefore imperative that the intestinal absorption of oral NPs be investigated. This review examines the various literature on the oral absorption of polymeric NPs, and provides an overview of the intestinal absorption models that have been developed for the study of oral nanoparticles. Three major categories of models including a total of eight measurement methods are described in detail (in vitro: dialysis bag, rat gut sac, Ussing chamber, cell culture model; in situ: intestinal perfusion, intestinal loops, intestinal vascular cannulation; in vivo: the blood/urine drug concentration method), and the advantages and disadvantages of each method are contrasted and elucidated. In general, in vitro and in situ methods are relatively convenient but lack accuracy, while the in vivo method is troublesome but can provide a true reflection of drug absorption in vivo. This review summarizes the development of intestinal absorption experiments in recent years and provides a reference for the systematic study of the intestinal absorption of nanoparticle-bound drugs.

Advances in the transepithelial transport of nanoparticles

The intestinal epithelium represents a barrier to the delivery of nanoparticles (NPs). It prevents intact NPs from efficiently crossing the mucosa to access the circulation, thus limiting the successful application of NP-based oral drug delivery. Recent advances in nanotechnology have provided promising solutions to this challenge. This review describes the potential intestinal absorption pathways of NPs, including the transenterocytic pathway, paracellular pathway and M-cell-mediated pathway. NP properties that influence transcytosis are summarized; and the biodistribution of NPs after oral absorption is described and the future prospects of novel NPs are explored.

Cell-targeted platinum nanoparticles and nanoparticle clusters

The facile preparation of cell-targeted platinum nanoparticles (PtNPs) is described, using designed peptides that as a single molecule control PtNP cluster growth, stabilise clusters in aqueous suspension and enable attachment of a versatile range of cell-targeting ligands.