A review of emerging techniques for pyrethroid residue detection in agricultural commodities

Pyrethroid pesticides are essential for modern agriculture, helping to control pests and protect crops. However, due to growing concerns about their potential impact on human health and the environment, reliable detection methods are essential to ensure food safety. In this literature review, we explore the techniques used over the past decade to detect pyrethroid residues in agricultural products. Until now, various methods have been developed for detecting pyrethroid pesticides, ranging from conventional analytical approaches to innovative approaches. The conventional analytical approaches include gas, liquid, and supercritical fluid chromatography, micellar electrokinetic capillary chromatography, and enzyme-linked immunosorbent assay. Whereas innovative approaches refer to various optical-based and electrochemical-based sensors. For each method, we evaluate its strengths, limitations, and practical applications. Recent innovations are highlighted, focusing on sensitivity, selectivity, and practical applicability. By summarizing the current state of research, this review serves as a valuable resource for researchers and practitioners, providing insights into the evolving technology and strategy for detecting pyrethroid residue.

Recoverable and reusable light-induced multi-arm azobenzenes-Fe3O4 hybrid sorbent for enrichment of phthalate plasticizer and utilized as a SALDI substrate for the detection of 2-naphthol

The construction, structural identifications along with compositional properties, using TEM, FT-IR, and XPS spectroscopies, of an innovative light-induced multi-arm azobenzenes based Fe3O4 magnetic nanoparticles (Azo-Fe3O4 MNPs) are being reported. Such organic (light-sensitive dendrimers-like structure), inorganic (magnet core), hybrid material has been applied as an efficient recoverable/reusable extractive sorbent for the detection of phthalate plasticizers from acetate buffer solution. The extraction study was controlled within consecutive procedures via UV-light exposure to achieve pore-size control which then further subjected for the evaluation of the analytes' retention, separation, and release as well as the detection of the phthalate pollutants using GCMS-. Various experimental conditions, such as time of extraction, salt concentration, pH, and desorption time, were studied and adjusted. Additionally, the extraction repeatability (RSD from 0.46 % to 6.12%, n = 5) of the studied sorbent was comparable to other published work. The linear range extended from 6.25 to 100 μg L-¹ and detection limits (LOD) within the range of 41- 150 ng L-1 were achieved, demonstrating good linearity with values ranging from 0.9992 to 0.9892. The inter-batch and intra-batch RSD ranged from 0.46 % to 6.12 %, respectively. Additionally, it provides effective detection of 2-naphthol when used as a SALDI substrate.

Stimuli-Responsive Molecularly Imprinted Polymers: Mechanism and Applications

Molecularly imprinted polymers (MIPs) are very suitable for extraction, drug delivery systems, and sensors due to their good selective adsorption ability, but the difficulty of eluting templates during synthesis and the limitation of application scenarios put higher demands on MIPs. Stimuli-responsive MIPs (SR-MIPs) can actively respond to changes in external conditions to realize various functions, which provides new ideas for the further development of MIPs. This paper reviews the multiple response modes of MIPs, including the common temperature, pH, photo, magnetic, redox-responsive and rare gas, biomolecule, ion, and solvent-responsive MIPs, and explains the mechanism, composition, and applications of such SR-MIPs. These SR-MIPs and the resulting dual/multiple-responsive MIPs have good selectivity, and controllability, and are very promising for isolation and extraction, targeted drug delivery, and electro-sensor.

A review on carbon-based biowaste and organic polymer materials for sustainable treatment of sulfonamides from pharmaceutical wastewater

Frequent detection of sulfonamides (SAs) pharmaceuticals in wastewater has necessitated the discovery of suitable technology for their sustainable remediation. Adsorption has been widely investigated due to its effectiveness, simplicity, and availability of various adsorbent materials from natural and artificial sources. This review highlighted the potentials of carbon-based adsorbents derived from agricultural wastes such as lignocellulose, biochar, activated carbon, carbon nanotubes graphene materials as well as organic polymers such as chitosan, molecularly imprinted polymers, metal, and covalent frameworks for SAs removal from wastewater. The promising features of these materials including higher porosity, rich carbon-content, robustness, good stability as well as ease of modification have been emphasized. Thus, the materials have demonstrated excellent performance towards the SAs removal, attributed to their porous nature that provided sufficient active sites for the adsorption of SAs molecules. The modification of physico-chemical features of the materials have been discussed as efficient means for enhancing their adsorption and reusable performance. The article also proposed various interactive mechanisms for the SAs adsorption. Lastly, the prospects and challenges have been highlighted to expand the knowledge gap on the application of the materials for the sustainable removal of the SAs.

Determination of 35 sulfonamides in pork by magnetic molecularly imprinted polymer-based dispersive solid-phase extraction and ultra-performance liquid chromatography photodiode array method

BACKGROUND

Sulfonamide residues in foods of animal origin are potential risks to consumer health, so it is very important to inspect them. Among the previously reported instrumental methods, the best method can only be used to determine at most 22 sulfonamides. Thus, an instrumental method capable of determining more sulfonamide species is desirable.

RESULTS

In this study, sulfadoxine was used as a template to synthesize a type of magnetic molecularly imprinted polymer that could recognize 35 sulfonamides. After characterization, this composite was used to develop a dispersive solid-phase extraction method for extraction and purification of the 35 sulfonamides in pork, followed by determination using an ultra-performance liquid chromatography photodiode array method. This composite exhibited high adsorption capacity (11.01-19.21 μg mg^-1 ) and high recovery (>89.01%), and could be reused at least ten times. Due to the enrichment effect during sample preparation (enrichment factor 22-66), the limits of detection for determination of the 35 drugs in pork were in the range of 0.08-0.53 ng g^-1 . The detection results for some real pork samples were consistent with a liquid chromatographic-tandem mass spectrometric method. After comparison, the present method showed generally better performances than the previously reported sample preparation methods and instrumental methods for detection of sulfonamides.

CONCLUSION

The method developed in the present study could be used as a practical tool for routine detection of sulfonamide residues in pork samples. © 2022 Society of Chemical Industry.

Room temperature fabrication of magnetic covalent organic frameworks for analyzing sulfonamide residues in animal-derived foods

A magnetic solid phase extraction method based on magnetic covalent organic frameworks (TpBD@Fe₃ O₄ ) combined with high performance liquid chromatography has been developed to detect the sulfonamides including sulfadiazine, sulfamerazine, sulfamethazine and sulfamethoxazole in milk and meat. TpBD@Fe₃ O₄ were synthesized at room temperature under mild reaction conditions with a simple and rapid operation. The TpBD@Fe₃ O₄ exhibited higher extraction efficiency because of the π-π and electrostatic interactions between the benzene ring structure of the TpBD and the SA molecules. The extraction conditions including the dosage of adsorbents, the type and dosage of eluent, the elution time and the pH of the sample solution were fully optimized. The detection results showed good linearity over a wide range (50-5×10⁴ ng/mL) and low detection limits (3.39-5.77 ng/mL) for the SA targets. The practicability of this MSPE-HPLC method was further evaluated by analyzing milk and meat samples, with recoveries of the targets of 71.6%-110.8% in milk and 71.9%-109.7% in pork. The successful detection of SAs residues has demonstrated the TpBD@Fe₃ O₄ excellent practical potential for analyzing pharmaceutical residues in animal-derived foods. This article is protected by copyright. All rights reserved.

Photoresponsive molecularly imprinted polymers based on 4-[(4-methacryloyloxy)phenylazo] benzenesulfonic acid for the determination of sulfamethazine

Core-shell structured photoresponsive molecularly imprinted polymers were developed for the determination of sulfamethazine in milk samples. The photoresponsive imprinted polymers were prepared with polymethyl methacrylate containing a mass of ester groups as core, sulfamethazine as template molecules, self-synthesized water-soluble 4-[(4-methacryloyloxy)phenylazo] benzenesulfonic acid as a photoresponsive monomer, and ethylene dimethacrylate as cross-linker. Interestingly, the imprinted polymer can specifically adsorb sulfamethazine under dark and 440 nm irradiation, and release it at 365 nm. A series of adsorption experiments showed that the maximum adsorption capacity reached 12.5 mg⋅g^-1 , and the adsorption equilibrium was achieved within 80 min. Moreover, the imprinted polymers display excellent reusability, with almost no performance loss after four times photo-controlled adsorption-release cycles, and the imprinted polymers have excellent selectively for sulfamethazine (imprinting factor  = 3.01). In the end, the imprinted polymers realized effective separation and enrichment of sulfamethazine in milk, with a recovery rate of over 97.5%. The material can be used as a solid-phase extractant in the process of enrichment and separation for the quantitative detection of sulfamethazine in milk samples.

Application of stimuli-responsive materials for extraction purposes

Stimuli-responsive materials, frequently designated as "smart/intelligent materials", can modify their structure or properties by either a biological, physical, or chemical stimulus which, if properly controlled, could be used for specific applications. Such materials have been studied and exploited in several fields, like electronics, photonics, controlled drugs administration, imaging and medical diagnosis, among others, as well as in Analytical Chemistry where they have been used as chromatographic stationary phases, as part of sensors and for extraction purposes. This review article pretends to provide an overview of the most recent applications of these materials (mostly polymeric materials) in sample preparation for extraction purposes, as well as to provide a general vision of the current state-of-the-art of this field, their potential use and future applications.

Trends in sensitive detection and rapid removal of sulfonamides: A review

Sulfonamides in environmental water, food, and feed are a major concern for both aquatic ecosystems and public health, because they may lead to the health risk of drug resistance. Thus, numerous sensitive detection and rapid removal methodologies have been established. This review summarizes the sample preparation techniques and instrumental methods used for sensitive detection of sulfonamides. Additionally, adsorption and photocatalysis for the rapid removal of sulfonamides are also discussed. This review provides a comprehensive perspective on future sulfonamide analyses that have good performance, and on the basic methods for the rapid removal of sulfonamides.

Photoirradiation surface molecularly imprinted polymers for the separation of 6-O-α-d-maltosyl-β-cyclodextrin

Photoirradiation surface molecularly imprinted polymers for the separation of 6-O-α-d-maltosyl-β-cyclodextrin were synthesized using functionalized silica as a matrix, 4-(phenyldiazenyl)phenol as a light-sensitive monomer, and 6-O-α-d-maltosyl-β-cyclodextrin as a template. Fourier transform infrared spectroscopy results indicated that 4-(phenyldiazenyl)phenol was grafted onto the surface of functionalized silica. The obtained imprinted polymers exhibited specific recognition toward 6-O-α-d-maltosyl-β-cyclodextrin. Equilibrium binding experiments showed that the photoirradiation surface molecularly imprinted polymers obtained the maximum adsorption amount of 6-O-α-d-maltosyl-β-cyclodextrin at 20.5 mg/g. In binding kinetic experiments, the adsorption reached saturation within 2 h with binding capacity of 72.8%. The experimental results showed that the adsorption capacity and selectivity of imprinted polymers were effective for the separation of 6-O-α-d-maltosyl-β-cyclodextrin, indicating that imprinted polymers could be used to isolate 6-O-α-d-maltosyl-β-cyclodextrin from a conversion mixture containing β-cyclodextrin and maltose. The results showed that the imprinted polymers prepared by this method were very promising for the selective separation of 6-O-α-d-maltosyl-β-cyclodextrin.