Protein Biochips: Oriented Surface Immobilization of Proteins

Cofactor-directed co-immobilization of dual-enzyme on functionalized montmorillonite with enhanced catalytic performance

Recently, multi-enzyme cascade catalysis has attracted increasing attention due to the advantages of integrating multiple enzymes, few side reactions and high catalytic efficiency. Herein, a novel dual-enzyme cascade system (GOx-FMt-HRP) was developed through cofactor-directed orientational co-immobilization of glucose oxidase (GOx) and horseradish peroxidase (HRP) onto functional montmorillonite (FMt). The presented method realizes the reconstitution of cofactors and apo-enzymes (enzymes without cofactors), which enables enzymes to be immobilized in specific orientations on the support, thereby effectively reducing changes in their conformation. The results proved that GOx-FMt-HRP exhibited better catalytic stability and reusability than GOx/FMt/HRP (enzymes were co-immobilization on FMt by physical adsorption) and a physical mixture of free enzymes (GOx + HRP). After storage for 1 month, the residual activities of GOx-FMt-HRP, GOx/FMt/HRP, and GOx + HRP were 79.3 %, 60.4 %, and 1.32 %, respectively. Furthermore, GOx-FMt-HRP retained over 74 % activity after 10 uses, which is higher than that of GOx/FMt/HRP (61 %). Moreover, the substrate channeling allowed the prepared GOx-FMt-HRP to show the highest catalytic efficiency for both glucose (2.80 S-1·mM-1) and TMB (3.87 S-1·mM-1), being approximately 2.6-fold and 2.1-fold higher than that of the GOx + HRP, respectively. This work develops a simple method for dual-enzyme co-immobilization, aiding sustainable enzyme catalysis.

PET Foils Functionalized with Reactive Copolymers as Adaptable Microvolume ELISA Spot Array Platforms for Multiplex Serological Analysis of SARS-CoV-2 Infections

Microvolume ELISA platforms have become vital in diagnostics for their high-throughput capabilities and minimal sample requirements. High-quality substrates with advanced surface properties are essential for these applications. They enable both efficient biomolecule immobilization and antifouling properties, which are critical for assay sensitivity and specificity. This study presents PET-based microvolume ELISA spot arrays coated with amine- and DBCO-reactive copolymers MCP-2 and Copoly Azide. The platforms were designed for the sensitive and specific detection of specific antibodies such as COVID-19 biomarkers. Supporting robust attachment of the SARS-CoV-2 nucleoprotein (NP), these arrays outperform traditional approaches. It was demonstrated that covalent attachment methods proved more efficient than passive adsorption, together with the reduction of non-specific binding. Analytical performance was verified with classical ELISA and real-time Surface Plasmon Resonance (SPR) analysis. It enables sensitive detection of IgG and IgA antibodies, including IgG subclasses, in human serum. Clinically, the platform achieved 100.0% sensitivity and 92.9% specificity for anti-NP antibody detection in COVID-19-positive and negative samples. Additionally, DNA-directed immobilization extended the platform's utility to multiplex serological measurements. These findings underscore the potential of PET-based microvolume ELISA arrays as scalable, high-throughput diagnostic tools suitable for detecting multiple biomarkers in a single assay and easily integrated into microfluidic devices.

Protein-based bioactive coatings: from nanoarchitectonics to applications

Protein-based bioactive coatings have emerged as a versatile and promising strategy for enhancing the performance and biocompatibility of diverse biomedical materials and devices. Through surface modification, these coatings confer novel biofunctional attributes, rendering the material highly bioactive. Their widespread adoption across various domains in recent years underscores their importance. This review systematically elucidates the behavior of protein-based bioactive coatings in organisms and expounds on their underlying mechanisms. Furthermore, it highlights notable advancements in artificial synthesis methodologies and their functional applications in vitro. A focal point is the delineation of assembly strategies employed in crafting protein-based bioactive coatings, which provides a guide for their expansion and sustained implementation. Finally, the current trends, challenges, and future directions of protein-based bioactive coatings are discussed.

Strategy based on multiplexed brush architectures for regulating the spatiotemporal immobilization of biomolecules

Functional surfaces that enable both spatial and temporal control of biomolecules immobilization have attracted enormous attention for various fields including smart biointerface materials, high-throughput bioarrays, and fundamental research in the biosciences. Here, a flexible and promising method was presented for regulating the spatiotemporal arrangement of multiple biomolecules by constructing the topographically and chemically diverse polymer brushes patterned surfaces. A series of polymer brushes patterned surfaces, including antifouling brushes patterned surface, epoxy-presenting brushes patterned surface without and with antifouling background layer, were fabricated to control the spatial distribution of protein and cell adhesion through specific and nonspecific means. The fluorescence measurements demonstrated the effectiveness of spatially regulating the density of surface-immobilized protein through controlling the areal thickness of the poly (glycidyl methacrylate) (PGMA) brush patterns, leading to various complex patterns featuring well-defined biomolecule concentration gradients. Furthermore, a multiplexed surface bearing epoxy groups and azido groups with various areal densities was fabricated for regulating the spatiotemporal arrangement of different proteins, enabling binary biomolecules patterns with higher degrees of functionality and complexity. The presented strategy for the spatiotemporal control of biomolecules immobilization would boost the development of dynamic and multifunctional biosystems.

Click Chemistry with Cyclopentadiene

Cyclopentadiene is one of the most reactive dienes in normal electron-demand Diels-Alder reactions. The high reactivities and yields of cyclopentadiene cycloadditions make them ideal as click reactions. In this review, we discuss the history of the cyclopentadiene cycloaddition as well as applications of cyclopentadiene click reactions. Our emphasis is on experimental and theoretical studies on the reactivity and stability of cyclopentadiene and cyclopentadiene derivatives.

"CHicable" and "Clickable" Copolymers for Network Formation and Surface Modification

In this study, we present the generation of novel, multifunctional polymer networks through a combination of C,H-insertion cross-linking (CHic) and click chemistry. To this, copolymers consisting of hydrophilic N,N-dimethylacrylamide as matrix component and repeat units containing azide moieties, as well as benzophenone or anthraquinone groups, are generated. The benzophenone or anthraquinone groups allow photo-cross-linking, surface attachment or covalent immobilization of adjacent (bio)molecules through CHic reactions. The azide moieties either can react with available alkynes through conventional click reactions or can be activated to form nitrenes, which can also undergo CHic reactions. By choosing appropriate reaction conditions, the same polymer can be used to follow very different reaction paths, opening up a plethora of choices for the generation of functional polymer networks. In the exemplary presented case ("CHic-Click"), irradiation of the copolymers with UV-A light (λ_irr = 365 nm) leads to cross-linking (network formation) and surface attachment simultaneously. The azide units remain intact during this cross-linking step, and alkyne-modified (bio)molecules can be bound through click reactions. Biofunctionalization of the polymer network with alkynylated streptavidin, followed by application of biotin-conjugated antibody and a model analyte, highlights the potential of these surface architectures as a toolbox which can be adapted for diverse bioanalytical applications.

Construction of novel curdlan-based and Ca2+-chelated magnetic microspheres (CCMM) for efficient protein purification and oriented immobilization

In this study, curdlan-based and calcium ion (Ca²⁺)-chelated magnetic microspheres (CCMM) were prepared for protein purification and oriented immobilization. Additional purification steps before immobilization were not required. CCMM samples were produced by reverse embedding of Fe₃O₄ nanoparticles with curdlan and chelated with Ca²⁺ in the presence of iminodiacetic acid. The β-xylanase XynII from Trichoderma reesei QM6a was used to investigate the efficiency of CCMM preparation. The resulting CCMM-XynII was found to be very stable, showing 82 % and 60 % of initial activities after storage for 35 days and after being assayed ten times, respectively. In addition, the CCMM-XynII showed higher stabilities in the presence of organic solvents and multiple chemicals than the free XynII, suggesting that the CCMM-XynII could be efficient for applications requiring the presence of organic solvents. In addition, CCMM may be more suitable than commercially available Ni-NTA for purification of proteins intolerant of Ni²⁺.

Patterning of protein-based materials

Micro- and nanopatterning of proteins on surfaces allows to develop for example high-throughput biosensors in biomedical diagnostics and in general advances the understanding of cell-material interactions in tissue engineering. Today, many techniques are available to generate protein pattern, ranging from technically simple ones, such as micro-contact printing, to highly tunable optical lithography or even technically sophisticated scanning probe lithography. Here, one focus is on the progress made in the development of protein-based materials as positive or negative photoresists allowing micro- to nanostructured scaffolds for biocompatible photonic, electronic and tissue engineering applications. The second one is on approaches, which allow a controlled spatiotemporal positioning of a single protein on surfaces, enabled by the recent developments in immobilization techniques coherent with the sensitive nature of proteins, defined protein orientation and maintenance of the protein activity at interfaces. The third one is on progress in photolithography-based methods, which allow to control the formation of protein-repellant/adhesive polymer brushes.

Active tyrosine phenol-lyase aggregates induced by terminally attached functional peptides in Escherichia coli

The formation of inclusion bodies (IBs) without enzyme activity in bacterial research is generally undesirable. Researchers have attempted to recovery the enzyme activities of IBs, which are commonly known as active IBs. Tyrosine phenol-lyase (TPL) is an important enzyme that can convert pyruvate and phenol into 3,4-dihydroxyphenyl-L-alanine (L-DOPA) and IBs of TPL can commonly occur. To induce the correct folding and recover the enzyme activity of the IBs, peptides, such as ELK16, DKL6, L6KD, ELP10, ELP20, L6K2, EAK16, 18A, and GFIL16, were fused to the carboxyl terminus of TPL. The results showed that aggregate particles of TPL-DKL6, TPL-ELP10, TPL-EAK16, TPL-18A, and TPL-GFIL16 improved the enzyme activity by 40.9%, 50.7%, 48.9%, 86.6%, and 97.9%, respectively. The peptides TPL-DKL6, TPL-EAK16, TPL-18A, and TPL-GFIL16 displayed significantly improved thermostability compared with TPL. L-DOPA titer of TPL-ELP10, TPL-EAK16, TPL-18A, and TPL-GFIL16, with cells reaching 37.8 g/L, 53.8 g/L, 37.5 g/L, and 29.1 g/L, had an improvement of 111%, 201%, 109%, and 63%, respectively. A higher activity and L-DOPA titer of the TPL-EAK16 could be valuable for its industrial application to biosynthesize L-DOPA.

Both Poly(ethylene glycol) and Poly(methyl ethylene phosphate) Guide Oriented Adsorption of Specific Proteins

Developing new functional biomaterials requires the ability to simultaneously repel unwanted and guide wanted protein adsorption. Here, we systematically interrogate the factors determining the protein adsorption by comparing the behaviors of different polymeric surfaces, poly(ethylene glycol) and a poly(phosphoester), and five different natural proteins. Interestingly we observe that, at densities comparable to those used in nanocarrier functionalization, the same proteins are either adsorbed (fibrinogen, human serum albumin, and transferrin) or repelled (immunoglobulin G and lysozyme) by both polymers. However, when adsorption takes place, the specific surface dictates the amount and orientation of each protein.

Perspective: A toolbox for protein structure determination in physiological environment through oriented, 2D ordered, site specific immobilization

Revealing the structure of complex biological macromolecules, such as proteins, is an essential step for understanding the chemical mechanisms that determine the diversity of their functions. Synchrotron based X-ray crystallography and cryo-electron microscopy have made major contributions in determining thousands of protein structures even from micro-sized crystals. They suffer from some limitations that have not been overcome, such as radiation damage, the natural inability to crystallize a number of proteins, and experimental conditions for structure determination that are incompatible with the physiological environment. Today, the ultra-short and ultra-bright pulses of X-ray free-electron lasers have made attainable the dream to determine protein structures before radiation damage starts to destroy the samples. However, the signal-to-noise ratio remains a great challenge to obtain usable diffraction patterns from a single protein molecule. With the perspective to overcome these challenges, we describe here a new methodology that has the potential to overcome the signal-to-noise-ratio and protein crystallization limits. Using a multidisciplinary approach, we propose to create ordered, two dimensional protein arrays with defined orientation attached on a self-assembled-monolayer. We develop a literature-based flexible toolbox capable of assembling different kinds of proteins on a functionalized surface and consider using a graphene cover layer that will allow performing experiments with proteins in physiological conditions.

Improved Performance of DNA Microarray Multiplex Hybridization Using Probes Anchored at Several Points by Thiol-Ene or Thiol-Yne Coupling Chemistry

Nucleic acid microarray-based assay technology has shown lacks in reproducibility, reliability, and analytical sensitivity. Here, a new strategy of probe attachment modes for silicon-based materials is built up. Thus, hybridization ability is enhanced by combining thiol-ene or thiol-yne click chemistry reactions with a multipoint attachment of polythiolated probes. The viability and performance of this approach was demonstrated by specifically determining Salmonella PCR products up to a 20 pM sensitivity level.

Thiol-Ene Modified Amorphous Carbon Substrates: Surface Patterning and Chemically Modified Electrode Preparation

Amorphous carbon (aC) films are chemically stable under ambient conditions or when interfaced with aqueous solutions, making them a promising material for preparing biosensors and chemically modified electrodes. There are a number of wet chemical methods capable of tailoring the reactivity and wettability of aC films, but few of these chemistries are compatible with photopatterning. Here, we introduce a method to install thiol groups directly onto the surface of aC films. These terminal thiols are compatible with thiol-ene click reactions, which allowed us to rapidly functionalize and pattern the surface of the aC films. We thoroughly characterized the aC films and confirmed the installation of surface-bound thiols does not significantly oxidize the surface or change its topography. We also determined the conditions needed to selectively attach alkene-containing molecules to these films and show the reaction is proceeding through a thiol-mediated reaction. Lastly, we demonstrate the utility of our approach by photopatterning the aC films and preparing ferrocene-modified aC electrodes. The chemistry described here provides a rapid means of fabricating sensors and preparing photoaddressable arrays of (bio)molecules on stable carbon interfaces.

Cobalt(III)-Mediated Permanent and Stable Immobilization of Histidine-Tagged Proteins on NTA-Functionalized Surfaces

We present the cobalt(III)-mediated interaction between polyhistidine (His)-tagged proteins and nitrilotriacetic acid (NTA)-modified surfaces as a general approach for a permanent, oriented, and specific protein immobilization. In this approach, we first form the well-established Co(2+) -mediated interaction between NTA and His-tagged proteins and subsequently oxidize the Co(2+) center in the complex to Co(3+) . Unlike conventionally used Ni(2+) - or Co(2+) -mediated immobilization, the resulting Co(3+) -mediated immobilization is resistant toward strong ligands, such as imidazole and ethylenediaminetetraacetic acid (EDTA), and washing off over time because of the high thermodynamic and kinetic stability of the Co(3+) complex. This immobilization method is compatible with a wide variety of surface coatings, including silane self-assembled monolayers (SAMs) on glass, thiol SAMs on gold surfaces, and supported lipid bilayers. Furthermore, once the cobalt center has been oxidized, it becomes inert toward reducing agents, specific and unspecific interactions, so that it can be used to orthogonally functionalize surfaces with multiple proteins. Overall, the large number of available His-tagged proteins and materials with NTA groups make the Co(3+) -mediated interaction an attractive and widely applicable platform for protein immobilization.

Nanopatterned polymer brushes: conformation, fabrication and applications

Surfaces with end-grafted, nanopatterned polymer brushes that exhibit well-defined feature dimensions and controlled chemical and physical properties provide versatile platforms not only for investigation of nanoscale phenomena at biointerfaces, but also for the development of advanced devices relevant to biotechnology and electronics applications. In this review, we first give a brief introduction of scaling behavior of nanopatterned polymer brushes and then summarize recent progress in fabrication and application of nanopatterned polymer brushes. Specifically, we highlight applications of nanopatterned stimuli-responsive polymer brushes in the areas of biomedicine and biotechnology.

Chemoselective Strategies to Peptide and Protein Bioprobes Immobilization on Microarray Surfaces

Ordered and reproducible bioprobe immobilization onto sensor surfaces is a critical step in the development of reliable analytical devices. A growing awareness of the impact of the immobilization scheme on the consistency of the generated data is driving the demand for chemoselective approaches to immobilize biofunctional ligands, such as peptides, in a predetermined and uniform fashion. Herein, the most intriguing strategies to selective and oriented peptide immobilization are described and discussed. The aim of the current work is to provide the reader a general picture on recent advances made in this field, highlighting the potential associated with each chemoselective strategy. Case studies are described to provide illustrative examples, and cross-references to more topic-focused and exhaustive reviews are proposed throughout the text.

Suspension arrays based on nanoparticle-encoded microspheres for high-throughput multiplexed detection

Spectrometrically or optically encoded microsphere based suspension array technology (SAT) is applicable to the high-throughput, simultaneous detection of multiple analytes within a small, single sample volume. Thanks to the rapid development of nanotechnology, tremendous progress has been made in the multiplexed detecting capability, sensitivity, and photostability of suspension arrays. In this review, we first focus on the current stock of nanoparticle-based barcodes as well as the manufacturing technologies required for their production. We then move on to discuss all existing barcode-based bioanalysis patterns, including the various labels used in suspension arrays, label-free platforms, signal amplification methods, and fluorescence resonance energy transfer (FRET)-based platforms. We then introduce automatic platforms for suspension arrays that use superparamagnetic nanoparticle-based microspheres. Finally, we summarize the current challenges and their proposed solutions, which are centered on improving encoding capacities, alternative probe possibilities, nonspecificity suppression, directional immobilization, and "point of care" platforms. Throughout this review, we aim to provide a comprehensive guide for the design of suspension arrays, with the goal of improving their performance in areas such as multiplexing capacity, throughput, sensitivity, and cost effectiveness. We hope that our summary on the state-of-the-art development of these arrays, our commentary on future challenges, and some proposed avenues for further advances will help drive the development of suspension array technology and its related fields.

Phototriggered functionalization of hierarchically structured polymer brushes

The precise design of bioactive surfaces, essential for the advancement of many biomedical applications, depends on achieving control of the surface architecture as well as on the ability to attach bioreceptors to antifouling surfaces. Herein, we report a facile avenue toward hierarchically structured antifouling polymer brushes of oligo(ethylene glycol) methacrylates via surface-initiated atom transfer radical polymerization (SI-ATRP) presenting photoactive tetrazole moieties, which permitted their functionalization via nitrile imine-mediated tetrazole-ene cyclocloaddition (NITEC). A maleimide-functional ATRP initiator was photoclicked to the side chains of a brush enabling a subsequent polymerization of carboxybetaine acrylamide to generate a micropatterned graft-on-graft polymer architecture as evidenced by X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). Furthermore, the spatially resolved biofunctionalization of the tetrazole-presenting brushes was accessed by the photoligation of biotin-maleimide and subsequent binding of streptavidin. The functionalized brushes bearing streptavidin were able to resist the fouling from blood plasma (90% reduction with respect to bare gold). Moreover, they were employed to demonstrate a model biosensor by immobilization of a biotinylated antibody and subsequent capture of an antigen as monitored in real time by surface plasmon resonance.

Design and optimization of a phosphopeptide anchor for specific immobilization of a capture protein on zirconium phosphonate modified supports

The attachment of affinity proteins onto zirconium phosphonate coated glass slides was investigated by fusing a short phosphorylated peptide sequence at one extremity to enable selective bonding to the active surface via the formation of zirconium phosphate coordinate covalent bonds. In a model study, the binding of short peptides containing zero to four phosphorylated serine units and a biotin end-group was assessed by surface plasmon resonance-enhanced ellipsometry (SPREE) as well as in a microarray format using fluorescence detection of AlexaFluor 647-labeled streptavidin. Significant binding to the zirconated surface was only observed in the case of the phosphopeptides, with the best performance, as judged by streptavidin capture, observed for peptides with three or four phosphorylation sites and when spotted at pH 3. When fusing similar phosphopeptide tags to the affinity protein, the presence of four phosphate groups in the tag allows efficient immobilization of the proteins and efficient capture of their target.

Fusing Catechol-Driven Surface Anchoring with Rapid Hetero Diels-Alder Ligation

We fuse the surface anchoring abilities of catechols with the rapid ligating nature of thiocarbonyl thio-based hetero-Diels-Alder (HDA) reactions via the synthesis of a new small molecule (HDA-DOPA-Cp) combining a HDA moiety with a catechol. Inspired by the mechanism of strong adhesion of marine mussels, we employed catechols as anchors to attach HDA ligation points to silicon wafers. The latter was exploited to generate a base for the HDA reactions on the surface employing α-cyclopentadiene (Cp) functional polymers such as poly(ethylene glycol)-Cp (PEG-Cp) and poly(trifluoro ethyl methacrylate)-Cp (PTFEMA-Cp) as dienes. By utilizing the fast and efficient HDA chemistry in combination with catechol anchoring groups, a new method for creating functional surfaces was developed.

Protein Microarrays with Novel Microfluidic Methods: Current Advances

Microfluidic-based micromosaic technology has allowed the pattering of recognition elements in restricted micrometer scale areas with high precision. This controlled patterning enabled the development of highly multiplexed arrays multiple analyte detection. This arraying technology was first introduced in the beginning of 2001 and holds tremendous potential to revolutionize microarray development and analyte detection. Later, several microfluidic methods were developed for microarray application. In this review we discuss these novel methods and approaches which leverage the property of microfluidic technologies to significantly improve various physical aspects of microarray technology, such as enhanced imprinting homogeneity, stability of the immobilized biomolecules, decreasing assay times, and reduction of the costs and of the bulky instrumentation.

Enhanced immobilization of gold nanoclusters on graphite

The immobilization of individual biological molecules by metal nanoparticles requires that the particles themselves be immobilized. We introduce a new technique for immobilization of gold clusters based on their binding to small tunnels in a graphite support, themselves created by the implantation of small clusters. These tunnels are shown to perform as more effective cluster immobilization sites than point defects on the surface of graphite. The method is tested with atomic force microscopy (AFM) (both contact and noncontact mode) scanning. Size-selected clusters with 923, 561, 309, and 147 atoms have been immobilized and imaged with high-resolution, noncontact AFM.

The fusions of elastin-like polypeptides and xylanase self-assembled into insoluble active xylanase particles

We fused the genes of elastin-like polypeptides (ELPs) and xylanase and then expressed them in Escherichia coli. Unexpectedly, the fusion proteins self-assembled into insoluble active particles as the ELPs underwent a hardly reversible phase transition. The specific activity of the particles was 92% of the native counterparts, which means it can act as a pull-down handler for converting soluble proteins into active aggregates. We evaluated the characterizations of the insoluble active xylanase particles in detail and the results were encouraging. The pH optimum (6.0) of the particles was the same as the free one, but the optimum pH range was 5-7, while the free xylanase was 6-7. The free xylanase had an optimum temperature of 50°C, whereas the insoluble active xylanase particles shifted to 70°C. The pH stability, thermostability and storage stability of the xylanase particles increased significantly when compared with the free xylanase. We also observed an increase of the Km values of the free xylanase from 0.374gL(-1) to 0.980gL(-1) at the insoluble state. The considerable higher activity and stability of the xylanase particles were much like immobilized xylanases and could be valuable for its industrial application.

Regio- and chemoselective immobilization of proteins on gold surfaces

Protein chips are powerful tools as analytical and diagnostic devices for detection of biomolecular interactions, where the proteins are covalently or noncovalently attached to biosensing surfaces to capture and detect target molecules or biomarkers. Thus, fabrication of biosensing surfaces for regio- and chemoselective immobilization of biomolecules is a crucial step for better biosensor performance. In our previous studies, a regio- and chemoselective immobilization strategy was demonstrated on glass surfaces. This strategy is now used to regioselectively attach proteins to self-assembled monolayers (SAMs) on gold surfaces. Recombinant green fluorescent protein (GFP), glutathione S-transferase (GST), and antibody-binding protein G, bearing a C-terminal CVIA motif, were prepared and a farnesyl analogue with an ω-alkyne moiety was attached to the sulfhydryl moiety in the cysteine side chain by protein farnesyltransferase. The proteins, modified with the bioorthogonal alkyne functional group, were covalently and regioselectively immobilized on thiol or dithiocarbamate (DTC) SAMs on a gold surface by a Huigsen [3 + 2] cycloaddition reaction with minimal nonspecific binding. A concentration-dependent increase of fluorescence intensity was observed in wells treated with GFP on both thiol- and DTC-SAMs. The highly ordered, densely packed layer allowed for a high loading of immobilized protein, with a concomitant increase in substrate binding capacity. The DTC-SAMs were substantially more resistant to displacement of the immobilized proteins from the gold surface by β-mercaptoethanol than alkane-thiol SAMs.

Site-specific immobilization of DNA on silicon surfaces by using the thiol–yne reaction

Covalent immobilization of ssDNA fragments onto silicon-based materials was performed using the thiol–yne reaction.

Exploiting end group functionalization for the design of antifouling bioactive brushes

The Diels–Alder reaction between cyclopentadiene and maleimide is exploited to immobilize proteins on the chain-end of polymer brushes.

Zwitterionic moieties from the Huisgen reaction: a case study with amphiphilic dendritic assemblies

Supramolecular nano-assemblies that reduce nonspecific interactions with biological macromolecules, such as proteins, are of great importance for various biological applications. Recently, zwitterionic materials have been shown to reduce nonspecific interactions with biomolecules, owing both to their charge neutrality and their ability to form a strong hydration layer around zwitterions via electrostatic interactions. Here, new triazole-based zwitterionic moieties are presented that are incorporated as the hydrophilic functionalities in facially amphiphilic dendrons. The amphiphilic zwitterionic dendrons spontaneously self-assemble in aqueous solutions forming micelle-type aggregates, which were confirmed by DLS, TEM, and fluorescence techniques. The structural and functional characteristics of the zwitterionic dendrons are also compared with the corresponding charge-neutral PEG-based dendrons and anionic carboxylate-based dendrons. Surface-charge measurements, temperature sensitivity and evaluation of interactions of these assemblies with proteins form the bases for these comparisons.

Synthesis of biotinylated aldehyde polymers for biomolecule conjugation

Biotinylated polymers with side-chain aldehydes were prepared for use as multifunctional scaffolds. Two different biotin-containing chain transfer agents (CTAs) and an aldehyde-containing monomer, 6-oxohexyl acrylate (6OHA), are synthesized. Poly(ethylene glycol) methyl ether acrylate (PEGA) and 6OHA are copolymerized by reversible addition-fragmentation chain transfer (RAFT) polymerization in the presence of the biotinylated CTAs. The resulting polymers are analyzed by GPC and(1) H NMR spectroscopy. The polymer end groups contained a disulfide bond, which could be readily reduced in solution to remove the biotin. Reactivity of the aldehyde side chains is demonstrated by oxime and hydrazone formation at the polymer side chains, and conjugate formation of fluorescently labeled polymers with streptavidin is investigated by gel electrophoresis.

Preparation and properties of cyclic acetal based biodegradable gel by thiol-ene photopolymerization

Synthetic, hydrolytically degradable biomaterials have been widely developed for biomedical use; however, most of them will form acidic products upon degradation of polymer backbone. In order to address this concern, we proposed to fabricate a biodegradable gel based on the crosslinking of a cyclic acetal monomer with reactable diallyl group and multifunctional thiols by thiol-ene photopolymerization. This gel produces diols and carbonyl end groups upon hydrolytic degradation and could be entirely devoid of acidic by-products. Real time infrared spectroscopy was employed to investigate the effect of different light intensities and concentrations of photoinitiator on the polymerization kinetics. With the increase of the concentration of photoinitiator and light intensity, both the rate of polymerization and final double bond conversion increased. Degradation of cyclic acetal based networks was investigated in PBS medium so as to simulate physiological conditions. The remaining mass of the materials after 25 days incubation was 84%. TGA analysis showed that the gels exhibited a typical weight loss (97.2%) at around 378 °C. In vitro cytotoxicity showed that the cyclic acetal based gels had non-toxicity to cell L-929 and had good biocompatibility.

SURFACE MODIFICATION OF ALUMINUM OXIDE FOR BIOSENSING APPLICATION

The surface modification for immobilization of antibodies on the aluminum oxide surface was developed for biosensing application. The aluminum oxide has been received much attention since it has various advantages including low cost, hardness, resistance to organic solvents, and high capacitance. In addition, the aluminum oxide can prevent the leakage current in the electrical detection. For development of the protein anchorable surface, the aluminum oxide chip was treated with oxygen plasma and directly immersed in ethanol and toluene solution of 3-aminopropyltriethoxysilane (APTES). Next, this amine modified chip was immersed in the glutaraldehyde solution that contained sodium cyanoborohydride. Finally, the fluorescent materials, the Alexa 488, and the FITC conjugated anti-IgG were reacted to the aldehyde-modified surface. To verify the modified surface, the intensity of the fluorescence was measured and compared. The higher intensity of the fluorescence was observed when the APTES was dissolved in toluene rather than in ethanol. From the highest intensity of the fluorescence observed, the FITC conjugated anti-IgG was well immobilized on the modified surface of the aluminum oxide with APTES and glutaraldehyde. Thus, the proposed surface modification method can immobilize the proteins including antibodies, and can be applied for the various biological researches including biosensors and biochips.

Oriented immobilization of proteins on hydroxyapatite surface using bifunctional bisphosphonates as linkers

Oriented immobilization of proteins is an important step in creating protein-based functional materials. In this study, a method was developed to orient proteins on hydroxyapatite (HA) surfaces, a widely used bone implant material, to improve protein bioactivity by employing enhanced green fluorescent protein (EGFP) and β-lactamase as model proteins. These proteins have a serine or threonine at their N-terminus that was oxidized with periodate to obtain a single aldehyde group at the same location, which can be used for the site-specific immobilization of the protein. The HA surface was modified with bifunctional hydrazine bisphosphonates (HBPs) of various length and lipophilicity. The number of functional groups on the HBP-modified HA surface, determined by a 2,4,6-trinitrobenzenesulfonic acid (TNBS) assay, was found to be 2.8 × 10(-5) mol/mg of HA and unaffected by the length of HBPs. The oxidized proteins were immobilized on the HBP-modified HA surface in an oriented manner through formation of a hydrazone bond. The relative protein immobilization amounts through various HBPs were determined by fluorescence and bicinchoninic acid (BCA) assay and showed no significant effect by length and lipophilicity of HBPs. The relative amount of HBP-immobilized EGFP was found to be 10-15 fold that of adsorbed EGFP, whereas the relative amount of β-lactamase immobilized through HBPs (2, 3, 4, 6, and 7) was not significantly different than adsorbed β-lactamase. The enzymatic activity of HBP-immobilized β-lactamase was measured with cefazolin as substrate, and it was found that the catalytic efficiency of HBP-immobilized β-lactamase improved 2-5 fold over adsorbed β-lactamase. The results obtained demonstrate the feasibility of our oriented immobilization approach and showed an increased activity of the oriented proteins in comparison with adsorbed proteins on the same hydroxyapatite surface matrix.

Chemoenzymatic reversible immobilization and labeling of proteins without prior purification

Site-specific chemical modification of proteins is important for many applications in biology and biotechnology. Recently, our laboratory and others have exploited the high specificity of the enzyme protein farnesyltransferase (PFTase) to site-specifically modify proteins through the use of alternative substrates that incorporate bioorthogonal functionality including azides and alkynes. In this study, we evaluate two aldehyde-containing molecules as substrates for PFTase and as reactants in both oxime and hydrazone formation. Using green fluorescent protein (GFP) as a model system, we demonstrate that the purified protein can be enzymatically modified with either analogue to yield aldehyde-functionalized proteins. Oxime or hydrazone formation was then employed to immobilize, fluorescently label, or PEGylate the resulting aldehyde-containing proteins. Immobilization via hydrazone formation was also shown to be reversible via transoximization with a fluorescent alkoxyamine. After characterizing this labeling strategy using pure protein, the specificity of the enzymatic process was used to selectively label GFP present in crude E. coli extract followed by capture of the aldehyde-modified protein using hydrazide-agarose. Subsequent incubation of the immobilized protein using a fluorescently labeled or PEGylated alkoxyamine resulted in the release of pure GFP containing the desired site-specific covalent modifications. This procedure was also employed to produce PEGylated glucose-dependent insulinotropic polypeptide (GIP), a protein with potential therapeutic activity for diabetes. Given the specificity of the PFTase-catalyzed reaction coupled with the ability to introduce a CAAX-box recognition sequence onto almost any protein, this method shows great potential as a general approach for selective immobilization and labeling of recombinant proteins present in crude cellular extract without prior purification. Beyond generating site-specifically modified proteins, this approach for polypeptide modification could be particularly useful for large-scale production of protein conjugates for therapeutic or industrial applications.