Bio-Vitrimers for Sustainable Circular Bio-Economy

The aim to achieve sustainable development goals (SDG) and cut CO₂-emission is forcing researchers to develop bio-based materials over conventional polymers. Since most of the established bio-based polymeric materials demonstrate prominent sustainability, however, performance, cost, and durability limit their utilization in real-time applications. Additionally, a sustainable circular bioeconomy (CE) ensures SDGs deliver material production, where it ceases the linear approach from production to waste. Simultaneously, sustainable circular bio-economy promoted materials should exhibit the prominent properties to involve and substitute conventional materials. These interceptions can be resolved through state-of-the-art bio-vitrimeric materials that display durability/mechanical properties such as thermosets and processability/malleability such as thermoplastics. This article emphasizes the current need for vitrimers based on bio-derived chemicals; as well as to summarize the developed bio-based vitrimers (including reprocessing, recycling and self-healing properties) and their requirements for a sustainable circular economy in future prospects.

Accelerated Discovery of α-Cyanodiarylethene Photoswitches

Cyanodiarylethene chromophores are able to undergo constitutional exchange via dynamic covalent chemistry (DCC). During this process, the central ethylene bridge of the molecular scaffold can be broken and thereby enables the assembly of a new combination of aryl moieties around the reformed ethylene bridge. The reversible C═C double bond exchange has exemplarily been investigated using α-cyanostilbenes. Establishing a dynamic equilibrium reaction from α-cyanodiarylethene with arylacetonitriles under mild conditions has been the basis to access constitutional libraries of new photoswitches with potentially improved properties. When subject to irradiation with light of adequate wavelength, α-cyanodiarylethenes undergo Z/E isomerization followed by ring-closure. By screening the thus accessible dynamic chromophore libraries using a desired detection wavelength, we could identify specific dithienyl analogues that exhibit three-state photochromism. The combination of dynamic constitutional libraries of functional chromophores in combination with the light-guided screening and selection should lead to more rapid exploration of structural diversity dye chemistry.

Electrically Driven Artificial Muscles Using Novel Polysiloxane Elastomers Modified with Nitroaniline Push-Pull Moieties

The synthesis of novel dielectric elastomers that show a muscle-like actuation when exposed to a low electric field represents a major challenge in materials science. Silicone elastomers modified with polar side groups are among the most attractive dielectrics for such a purpose because of their high polarizability over a wide temperature and frequency range. Nitroaniline (NA) has a strong dipole moment, and therefore, its incorporation into silicone networks should allow the formation of elastomers with increased dielectric permittivity. However, incorporation of a large amount of NA into silicone needed to increase the dielectric permittivity is still challenging. In this work, we present the synthesis of polysiloxane elastomers modified with a large fraction of the nitroaniline (NA) polar group, following two different synthetic strategies. Both approaches allowed the formation of homogenous elastomers at the molecular level. These yellowish materials have a dielectric permittivity three times higher as compared to the reported NA-modified silicones. Additionally, they have excellent mechanical properties with low viscoelastic losses and a strain at break reaching 300%. Furthermore, the mechanical properties of these elastomers can be easily tuned by the content of cross-linkers used. The developed elastomers are highly stable in electromechanical tests and show an actuation strain of 8% at unprecedentedly low electric fields of 7.5 V/μm. The combination of properties such as high dielectric permittivity, large strain at break, low viscoelastic losses, fast and reversible actuation, and actuation at low electric fields is crucial for the new generation of dielectric elastomer materials that will find their way in applications ranging from artificial muscles, soft robots, sensors, and haptic displays to electronic skin.

Enlightening Materials with Photoswitches

Incorporating molecular photoswitches into various materials provides unique opportunities for controlling their properties and functions with high spatiotemporal resolution using remote optical stimuli. The great and largely still untapped potential of these photoresponsive systems has not yet been fully exploited due to the fundamental challenges in harnessing geometrical and electronic changes on the molecular level to modulate macroscopic and bulk material properties. Herein, progress made during the past decade in the field of photoswitchable materials is highlighted. After pointing to some general design principles, materials with an increasing order of the integrated photoswitchable units are discussed, spanning the range from amorphous settings over surfaces/interfaces and supramolecular ensembles, to liquid crystalline and crystalline phases. Finally, some potential future directions are pointed out in the conclusion. In view of the exciting recent achievements in the field, the future emergence and further development of light-driven and optically programmable (inter)active materials and systems are eagerly anticipated.

Design of Active Interfaces Using Responsive Molecular Components

Responsive interfaces are interfaces that show a defined and reversible change in physical properties in response to external stimuli. Typically, responsive interfaces result from the immobilization of responsive molecular components at the interface that translate a nanoscale signal into a macroscopic effect. Responsive interfaces can also be obtained if the topology of the interface can be reversibly changed using an external stimulus. As the surface of any material is its connection to the environment, responsive interfaces provide opportunities for interactive materials which are not only able to change properties upon demand, but also sense their environment and act autonomously. The application of responsive molecular components at interfaces, however, requires chemical and physical compatibility with the material surface of interest, posing a challenge not least in the retention of the responsive functionality. The state of the art in "active" interfaces which display responsive wettability, permeability, or adhesion is discussed, with a particular emphasis on microscale and nanoscale patterning since patterned interfaces can give rise to unique material properties. Finally, perspectives in the development of responsive interfaces, as well as promising approaches for bypassing the most prominent challenges are discussed.

Recent Implementations of Molecular Photoswitches into Smart Materials and Biological Systems

Light is a nearly ideal stimulus for molecular systems. It delivers information encoded in the form of wavelengths and their intensities with high precision in space and time. Light is a mild trigger that does not permanently contaminate targeted samples. Its energy can be reversibly transformed into molecular motion, polarity, or flexibility changes. This leads to sophisticated functions at the supramolecular and macroscopic levels, from light-triggered nanomaterials to photocontrol over biological systems. New methods and molecular adapters of light are reported almost daily. Recently reported applications of photoresponsive systems, particularly azobenzenes, spiropyrans, diarylethenes, and indigoids, for smart materials and photocontrol of biological setups are described herein with the aim to demonstrate that the 21st century has become the Age of Enlightenment-"Le siècle des Lumières"-in molecular sciences.

Photoinduced Regulation of the Heat Resistance in Polymer Networks with Diarylethene-Conjugated Reversible Covalent Cross-Links

A cross-linker with a diarylethene-conjugated Diels-Alder adduct (DAE/DA) was synthesized and applied in a radical polymerization system to afford polymer networks whose dynamic nature can be changed reversibly by photoirradiation. Free-radical polymerization of hexyl methacrylate and the DAE/DA-based cross-linker furnished an insoluble and transparent poly(hexyl methacrylate) network with DAE/DA moieties at their cross-linking points, which undergo de-cross-linking via a thermally induced retro-DA reaction upon heating. The photoregulation of such a thermal de-cross-linking reaction in DAE/DA-based polymer networks was demonstrated by swelling experiments and tensile tests, revealing drastic changes in the heat resistance and mechanical properties upon exposure to UV-vis irradiation.

The photoregulation of a mechanochemical polymer scission

Control over mechanochemical polymer scission by another external stimulus may offer an avenue to further advance the fields of polymer chemistry, mechanochemistry, and materials science. Herein, we demonstrate that light can regulate the mechanochemical behavior of a diarylethene-conjugated Diels-Alder adduct (DAE/DA) that reversibly isomerizes from a weaker open form to a stronger closed form under photoirradiation. Pulsed ultrasonication experiments, spectroscopic analyses, and density functional theory calculations support the successful photoregulation of the reactivity of this DAE/DA mechanophore, which is incorporated at the mid-chain of a polymer, and indicate that higher force and energy are required to cleave the closed form of the DAE/DA mechanophore relative to the open form. The present photoregulation concept provides an attractive approach toward the generation of new mechanofunctional polymers.