Designing high performance polymer nanocomposites by incorporating robustness-controlled polymeric nanoparticles: insights from molecular dynamics

Introducing polymeric nanoparticles into polymer matrices is an interesting topic, and the robustness of the polymeric nanoparticles is crucial for the properties of the polymer nanocomposites (PNCs). In this study, by incorporating star-shaped polymeric nanoparticles (SSPNs) into the polymer, the effect of the sphericity (η) and arm length (L) of the SSPNs on the mechanical properties of PNCs is systematically investigated, using a coarse-grained molecular dynamics simulation. In addition, the linear and spherical nanoparticles (NPs) are compared with SSPNs by fixing the approximate diameter and mass fraction of the NPs. The radial distribution function, the second virial coefficient, mean-squared displacement, bond autocorrelation function, and primitive path analysis are employed to systematically characterize the structure and dynamics of these new PNCs. It is found that the dispersion of the NPs is enhanced with the increase of η, and the entanglement density reaches maximum, which both contribute to the greatest mechanical reinforcing effect. More significantly, it is found that the classical Payne effect, namely the storage as a function of the strain amplitude, decreases remarkably, and with a much smaller loss factor for these SSPN filled polymer nanocomposites, compared to conventional PNCs filled with rigid NPs. Furthermore, the change of the arm length of the SSPNs is found to exhibit the same effect on the mechanical and viscoelastic properties, as the variation of the number of the arms. In general, this work shows that these new SSPN filled polymer nanocomposites can exceed conventional PNCs, by manipulating the robustness of the SSPNs using, for example, the number and length of the arms. This research may provide guidelines for the investigation of the structure-property relationships of the topological structure of polymeric nanoparticles.

Impact of Macrodiols on the Morphological Behavior of H12MDI/HDO-Based Polyurethane Elastomer

In this study, we evaluated the morphological behavior of polyurethane elastomers (PUEs) by modifying the soft segment chain length. This was achieved by increasing the soft segment molecular weight (Mn = 400–4000 gmol⁻¹). In this regard, polycaprolactone diol (PCL) was selected as the soft segment, and 4,4′-cyclohexamethylene diisocyanate (H₁₂MDI) and 1,6-hexanediol (HDO) were chosen as the hard segments. The films were prepared by curing polymer on Teflon surfaces. Fourier transform infrared spectroscopy (FTIR) was utilized for functional group identification in the prepared elastomers. FTIR peaks indicated the disappearance of −NCO and −OH groups and the formation of urethane (NHCOO) groups. The morphological behavior of the synthesized polymer samples was also elucidated using scanning electron microscopy (SEM) and atomic force microscopy (AFM) techniques. The AFM and SEM results indicated that the extent of microphase separation was enhanced by an increase in the molecular weight of PCL. The phase separation and degree of crystallinity of the soft and hard segments were described using X-ray diffraction (XRD). It was observed that the degree of crystallinity of the synthesized polymers increased with an increase in the soft segment’s chain length. To evaluate hydrophilicity/hydrophobicity, the contact angle was measured. A gradual increase in the contact angle with distilled water and diiodomethane (38.6°–54.9°) test liquids was observed. Moreover, the decrease in surface energy (46.95–24.45 mN/m) was also found to be inconsistent by increasing the molecular weight of polyols.

Biological evaluation of preceramic organosilicon polymers for various healthcare and biomedical engineering applications: A review

Preceramic organosilicon materials combining the properties of a polymer and an inorganic ceramic phase are of great interest to scientists working in biomedical sciences. The interdisciplinary nature of organosilicon polymers and their molecular structures, as well as their diversity of applications have resulted in an unprecedented range of devices and synergies cutting across unrelated fields in medicine and engineering. Organosilicon materials, especially the polysiloxanes, have a long history of industrial and medical uses in many versatile aspects as they can be easily fabricated into complex-shaped products using a wide variety of computer-aided or polymer manufacturing techniques. Thus far, intensive research activities have been mainly devoted to the processing of preceramic organosilicon polymers toward magnetic, electronic, structural, optical, and not biological applications. Herein we present innovative research studies and recent developments of preceramic organosilicon polymers at the interface with biological systems, displaying the versatility and multi-functionality of these materials. This article reviews recent research on preceramic organosilicon polymers and corresponding composites for bone tissue regeneration and medical engineering implants, focusing on three particular topics: (a) surface modifications to create tailorable and bioactive surfaces with high corrosion resistance and improved biological properties; (b) biological evaluations for specific applications, such as in glaucoma drainage devices, orthopedic implants, bone tissue regeneration, wound dressing, drug delivery systems, and antibacterial activity; and (c) in vitro and in vivo studies for cytotoxicity, genotoxicity, and cell viability. The interest in organosilicon materials stems from the fact that a vast array of these materials have complementary attributes that, when integrated appropriately with functional fillers and carefully controlled conditions, could be exploited either as polymeric Si-based composites or as organosilicon polymer-derived Si-based ceramic composites to tailor and optimize properties of the Si-based materials for various proposed applications.

Synthesis of antibacterial polyurethane film and its properties

Polyurethane (PU) is a polymer widely used in the biomedical field with excellent mechanical properties and good biocompatibility. However, it usually exhibits poor antibacterial properties for practical applications. Efforts are needed to improve the antibacterial activities of PU films for broader application prospect and added application values. In the present work, two PU films, TDI-P(E-co-T) and TDI-N-100-P(E-co-T), were prepared. Silver nanoparticles (AgNPs) were composited into the TDI-N-100-P(E-co-T) film for better mechanical properties and antibacterial activities, and resultant PU/AgNPs composite film was systematically characterized and studied. The as-prepared PU/AgNPs composite film exhibits much better antibacterial properties than the traditional PU membrane, exhibiting broader application prospect.

Influence of Polymer Composition on the Controlled Release of Docetaxel: A Comparison of Non-Degradable Polymer Films for Oesophageal Drug-Eluting Stents

Following the huge clinical success of drug-eluting vascular stents, there is a significant interest in the development of drug-eluting stents for other applications, such as the treatment of gastrointestinal (GI) cancers. Central to this process is understanding how particular drugs are released from stent coatings, which to a large extent is controlled by drug-polymer interactions. Therefore, in this study we investigated the release of docetaxel (DTX) from a selection of non-degradable polymer films. DTX-polymer films were prepared at various loadings (1, 5 and 10% w/w) using three commercially available polymers including poly(dimethylsiloxane) (PSi), poly (ethylene-co-vinyl acetate) (PEVA) and Chronosil polyurethane (PU). The formulations were characterised using different techniques such as photoacoustic Fourier-transform infrared (PA-FTIR) spectrophotometry, X-ray diffraction (XRD) and differential scanning calorimetry (DSC). The effect of DTX on the mechanical properties of the films, in-vitro release, and degradation tests were also assessed. For all polymers and DTX loadings, the drug was found to disperse homogenously without crystallisation within the polymer matrix. While no specific interactions were observed between DTX and PSi or PEVA, hydrogen-bonding appeared to be present between DTX and PU, which resulted in a concentration-dependent decrease in the Young’s moduli of the films due to disruption of inter-polymeric molecular interactions. In addition, the DTX-PU interactions were found to modulate drug release, providing near-linear release over 30 days, which was accompanied by a significant reduction in degradation products. The results indicate that DTX-loaded PU films are excellent candidates for drug-eluting stents for the treatment of oesophageal cancer.

Synthesis and Properties of Linear Polyether-Blocked Amino Silicone-Modified Cationic Waterborne Polyurethane

In this study, a waterborne polyurethane (WPU) is synthesized by using polytetramethylene ether glycol (PTMEG) to form the soft segment, 1,4-butanediol (BDO) as the chain extender, n-methyldiethanolamine (MDEA) as a hydrophilic chain extender, and isophorone diisocyanate (IPDI) to form the hard segment. Furthermore, the modified cationic WPU emulsion and its films are created through a reaction between the WPU and a linear polyether-blocked amino silicone (LEPS), which is an organosilicon compound that imparts flexibility. The properties of the structure and formed WPU films are then characterized by using Fourier transform infrared spectrometry, a thermogravimetric analysis, atomic force microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy, as well as by measuring the water contact angle, testing the water absorption, etc. It is found that, with an increase in the LEPS content in the WPU, the particle size of the modified WPU emulsion is increased, the WPU films are more flexible, and the resistance of the modified WPU films to heat and water are increased, while the crystallinity is reduced. The polysiloxane chain segment, which is added to the LEPS-modified WPU emulsion, is significantly enriched on the surface of the modified WPU films, while there are no adverse effects of the LEPS-modified WPU emulsion on the adhesive force between the WPU and substrate. When the LEPS content of the WPU is 14.0 wt%, the modified WPU emulsion and film provide the best performance.

Effects of polysiloxanes with different molecular weights on in vitro cytotoxicity and properties of polyurethane/cotton–cellulose nanofiber nanocomposite films

A series of polyurethane/cotton–cellulose nanofiber nanocomposite films are manufactured using amino-terminated polydimethylsiloxane, polycarbonate diol, isophorone diisocyanate, and dispersed cotton–cellulose nanofibers.

Frost-Resistant Epoxy-Urethane Binders Containing Diglycidyl Urethane

A novel method for developing frost-resistant epoxy-urethane binders is proposed that is based on mixtures of epoxy-urethane oligomers and diglycidyl urethane formed during synthesis. The microheterogeneous elastic materials obtained by curing these mixtures by the cycloaliphatic amines have a low glass transition temperature and high mechanical properties.

Multiblock Copolymer Grafting for Butanol Biofuel Recovery by a Sustainable Membrane Process

Biobutanol is an attractive renewable biofuel mainly obtained by the acetone-butanol-ethanol (ABE) fermentation process. Nevertheless, the alcohol concentration has to be limited to a maximum of 2 wt % in ABE fermentation broths to avoid butanol toxicity to the microorganisms. The pervaporation (PV) membrane process is a key sustainable technology for butanol recovery in these challenging conditions. In this work, the grafting of azido-polydimethylsiloxane (PDMS-N3) onto a PDMS-based multiblock copolymer containing alkyne side groups led to a series of original membrane materials with increasing PDMS contents from 50 to 71 wt %. Their membrane properties were assessed for butanol recovery by pervaporation from a model aqueous solution containing 2 wt % of n-butanol at 50 °C. The membrane flux J50μm for a reference thickness of 50 μm strongly increased from 84 to 192 g/h m(2) with increasing PDMS content for free-standing dense membranes with thicknesses in the range of 38-95 μm. At the same time, the intrinsic butanol permeability increased from 1.47 to 4.68 kg μm/h m(2) kPa and the permeate butanol content was also strongly improved from 38 to 53 wt %, corresponding to high and very high membrane separation factors of 30 and 55, respectively. Therefore, the new grafted copolymer materials strongly overcame the common permeability/selectivity trade-off for butanol recovery by a sustainable membrane process.

Synthesis and characterization of polyurethanes bearing carbosilane segments

New polyurethanes bearing carbosilane segment (1a–c) were synthesized and found to exhibit lower glass transition temperature and storage moduli than corresponding reference polyurethanes 2a–c, while thermal stability was retained.

Synthesis and characterization of metal-containing poly(siloxane-urethane) crosslinked structures derived from siloxane diols and ferrocene diisocyanate

Ferrocene, siloxane and polyurethane moieties were combined for the first time in cross-linked materials with interesting electric and electro-chemical behavior.

Electrospun vascular grafts with improved compliance matching to native vessels

Coronary artery bypass grafting is one of the most commonly performed major surgeries in the United States. Autologous vessels such as the saphenous vein are the current gold standard for treatment; however, synthetic vascular prostheses made of expanded poly(tetrafluoroethylene) or poly(ethylene terephthalate) are used when autologous vessels are unavailable. These synthetic grafts have a high failure rate in small diameter (<4 mm) applications due to rapid reocclusion via intimal hyperplasia. Current strategies to improve clinical performance are focused on preventing intimal hyperplasia by fabricating grafts with compliance and burst pressure similar to native vessels. To this end, we have developed an electrospun vascular graft from segmented polyurethanes with tunable properties by altering material chemistry and graft microarchitecture. Relationships between polyurethane tensile properties and biomechanical properties were elucidated to select polymers with desirable properties. Graft thickness, fiber tortuosity, and fiber fusions were modulated to provide additional tools for controlling graft properties. Using a combination of these strategies, a vascular graft with compliance and burst pressure exceeding the saphenous vein autograft was fabricated (compliance = 6.0 ± 0.6%/mmHg × 10(-4) , burst pressure = 2260 ± 160 mmHg). This graft is hypothesized to reduce intimal hyperplasia associated with low compliance in synthetic grafts and improve long-term clinical success. Additionally, the fundamental relationships between electrospun mesh microarchitecture and mechanical properties identified in this work can be utilized in various biomedical applications.

Synthesis and thermal properties of modified room temperature vulcanized (RTV) silicone rubber using polyhedral oligomeric silsesquioxane (POSS) as a cross linking agent

Incompletely condensed tetra-silanol-phenyl-polyhedral oligomeric silsesquioxane (TOPO) was synthesized first and then copolymerized with hydroxy terminated polydimethylsiloxane (HPDMS) as a cross linking agent to prepare room temperature vulcanized (RTV) silicone rubber (TOPO–PDMS).

Synthesis and characterisation of enhanced barrier polyurethane for encapsulation of implantable medical devices

Polymeric membranes have been used as interfaces between implantable devices and biological tissues to operate as a protective barrier from water exchanging and to enhance biocompatibility. Polyurethanes have been used as biocompatible membranes for decades. In this study, copolymers of polyether urethane (PEU) with polydimethylsiloxane (PDMS) were synthesised with the goal of creating materials with low water permeability and high elasticity. PDMS was incorporated into polymer backbone as a part of the soft segment during polyurethane synthesis and physical properties as well as water permeability of resulting copolymer were studied in regard to PDMS content. Increase in PDMS content led to increase of microphase separation of the copolymer and corresponding increase in elastic modulus. Surface energy of the polymer was decreased by incorporating PDMS compared to unmodified PEU. PDMS in copolymer formed a hydrophobic surface which caused reduction in water permeability and water uptake of the membranes. Thus, PDMS containing polyurethane with its potent water resistant properties demonstrated a great promise for use as an implantable encapsulation material.