Synthesis of polyphenylene molecular wires by surface-confined polymerization

Confined synthesis of conjugated microporous polymers for selective photocatalytic oxidation of amines

Photocatalytic oxidative coupling of amines is considered a mild, efficient, and sustainable strategy for the synthesis of imines. As a versatile organic semiconductor, conjugated microporous polymers (CMPs) are attractive in photocatalysis areas due to the diversity of their polymeric monomers. Herein, we report that in addition to the design of monomers, size-confined polymerization is also a feasible strategy to modulate the structure and photocatalysis properties of CMPs. We adopted dibromopyrazine as polymeric units to prepare pyrazine-involved hollow spherical CMPs (H-PyB) using a template method and successfully performed size-confined polymerization of hollow samples by resizing the templates. Interestingly, the small confinement space induced the formation of CMPs with better conjugate extensibility, resulting in enhanced conductivity, narrowed bandgaps, improved photoelectric performance, etc. As a result, small-sized H-PyB CMPs had superior activity for the photocatalytic oxidation of amines. Particularly, the smallest H-PyB CMPs that we designed in the present work exhibited excellent performance for the photocatalytic coupling oxidation of amines. When using benzylamine as a model substrate, the yield of the corresponding imine reached ∼ 113 mmol·g-1·h-1, accompanied by almost 100 % selectivity. Furthermore, the as-designed confined samples exhibited stable photocatalytic activity as well as good applicability for oxidative coupling of different amines. This work not merely reports a kind of CMP photocatalysts with excellent performance for the imine coupling oxidation but also proposes an alternative strategy for constructing high-performance organic photocatalysts by size-confined synthesis.

Increased Selectivity in Photolytic Activation of Nanoassemblies Compared to Thermal Activation in On-Surface Ullmann Coupling

On-surface synthesis is a powerful method that has emerged recently to fabricate a large variety of atomically precise nanomaterials on surfaces based on polymerization. It is very successful for thermally activated reactions within the framework of heterogeneous catalysis. As a result, it often lacks selectivity. We propose to use selective activation of specific bonds as a crucial ingredient to synthesize desired molecules with high selectivity. In this approach, thermally nonaccessible products are expected to arise in photolytically activated on-surface reactions with high selectivity. We demonstrate for assembled 2,2'-dibromo biphenyl clusters on Cu(111) that the thermal and photolytic activations yield distinctly different products, combining submolecular resolution of individual product molecules in real-space imaging by scanning tunneling microscopy with chemical identification in X-ray photoelectron spectroscopy and supported by ab initio calculations. The photolytically activated Ullmann coupling of 2,2'-dibromo biphenyl is highly selective, with only one identified product. It starkly contrasts the thermal reaction, which yields various products because alternate pathways are activated at the reaction temperature. Our study extends on-surface synthesis to a directed formation of thermally inaccessible products by direct bond activation. It promises tailored reactions of nanomaterials within the framework of on-surface synthesis based on the photolytic activation of specific bonds.

Light-Induced Increase of the Local Molecular Coverage on a Surface

Light is a versatile tool to remotely activate molecules adsorbed on a surface, for example, to trigger their polymerization. Here, we explore the spatial distribution of light-induced chemical reactions on a Au(111) surface. Specifically, the covalent on-surface polymerization of an anthracene derivative in the submonolayer coverage range is studied. Using scanning tunneling microscopy and X-ray photoemission spectroscopy, we observe a substantial increase of the local molecular coverage with the sample illumination time at the center of the laser spot. We find that the interplay between thermally induced diffusion and the reduced mobility of reaction products steers the accumulation of material. Moreover, the debromination of the adsorbed species never progresses to completion within the experiment time, despite a long irradiation of many hours.

Predicting Organometallic Intermediates in the Surface-Assisted Ullmann Coupling of Chrysene Isomers

On-surface polymerization of functional organic molecules has been recently recognized as a promising route to persistent low-dimensional structures with tailorable properties. In this contribution, using the coarse-grained Monte Carlo simulation method, we study the initial stage of the Ullmann coupling of doubly halogenated chrysene isomers adsorbed on a catalytically active (111) crystalline surface. To that end, we focus on the formation of labile metal-organic precursor structures preceding the covalent bonding of chrysene monomers. Four monomeric chrysene units with differently distributed halogen substituents were probed in the simulations, and the resulting precursor structures were compared and quantified. Moreover, the effect of (pro)chirality of chrysene tectons on the structure formation was elucidated by running separate simulations in enantiopure and racemic systems. The calculations showed that suitable manipulation of the halogen substitution pattern allows for the creation of diverse precursor architectures, ranging from straight and winded chains to cyclic oligomers with enantiopure, racemic, and nonracemic composition. The obtained findings can be helpful in developing synthetic strategies for covalent polymers with predefined architecture and functionality.

On-Surface Fabrication toward Polar 2D Macromolecular Crystals

Polar 2D macromolecular structures have attracted significant attention because of their ferroelectricity and ferro-magnetism. However, it is challenging to synthesize them experimentally because dipoles or spins of these macromolecules tend to cancel each other. So far, there has been no successful strategy for assembling macromolecules in a unidirectional manner, achieving stereoregular polymerization on metal surfaces, and creating polar 2D polymer crystals. Recent progress in molecular assembly, on-surface polymer synthesis, and direct control of molecules using electric field applications provides an opportunity to develop such strategies. In this regard, we first review past studies on chiral and achiral molecular assembly, on-surface polymer synthesis, and orientation control of polar molecules. Then, we discuss our newly developed approach called "vectorial on-surface synthesis", which is based on "dynamic chirality" of compass precursors, stereoselective polymerization, and favorable interchain interactions originating from CH-π interactions. Finally, we conclude with a prospective outlook.

On-surface cyclization of vinyl groups on poly-para-phenylene involving an unusual pentagon to hexagon transformation

On-surface synthesis relies on carefully designed molecular precursors that are thermally activated to afford desired, covalently coupled architectures. Here, we study the intramolecular reactions of vinyl groups in a poly-para-phenylene-based model system and provide a comprehensive description of the reaction steps taking place on the Au(111) surface under ultrahigh vacuum conditions. We find that vinyl groups successfully cyclize with the phenylene rings in the ortho positions, forming a dimethyl-dihydroindenofluorene as the repeating unit, which can be further dehydrogenated to a dimethylene-dihydroindenofluorene structure. Interestingly, the obtained polymer can be transformed cleanly into thermodynamically stable polybenzo[k]tetraphene at higher temperature, involving a previously elusive pentagon-to-hexagon transformation via ring opening and rearrangement on a metal surface. Our insights into the reaction cascade unveil fundamental chemical processes involving vinyl groups on surfaces. Because the formation of specific products is highly temperature-dependent, this innovative approach offers a valuable tool for fabricating complex, low-dimensional nanostructures with high precision and yield.

On-surface synthesis of ballbot-type N-heterocyclic carbene polymers

N-Heterocyclic carbenes (NHCs) are established ligands for metal complexes and surfaces. Here we go beyond monomeric NHCs and report on the synthesis of NHC polymers on gold surfaces, consisting of ballbot-type repeating units bound to single Au adatoms. We designed, synthesized and deposited precursors containing different halogens on gold surfaces under ultrahigh vacuum. Conformational, electronic and charge transport properties were assessed by combining low-temperature scanning tunneling microscopy, non-contact atomic force microscopy, X-ray photoelectron spectroscopy, first-principles calculations and reactive force field simulations. The confirmed ballbot-type nature of the NHCs explains the high surface mobility of the incommensurate NHC polymers, which is prerequisite for their desired spatial alignment. The delicate balance between mobility and polymerization rate allows essential parameters for controlling polymer directionality to be derived. These polymers open up new opportunities in the fields of nanoelectronics, surface functionalization and catalysis.

TM-Free and TM-Catalyzed Mechanosynthesis of Functional Polymers

Mechanochemically induced methods are commonly used for the depolymerization of polymers, including plastic and agricultural wastes. So far, these methods have rarely been used for polymer synthesis. Compared to conventional polymerization in solutions, mechanochemical polymerization offers numerous advantages such as less or no solvent consumption, the accessibility of novel structures, the inclusion of co-polymers and post-modified polymers, and, most importantly, the avoidance of problems posed by low monomer/oligomer solubility and fast precipitation during polymerization. Consequently, the development of new functional polymers and materials, including those based on mechanochemically synthesized polymers, has drawn much interest, particularly from the perspective of green chemistry. In this review, we tried to highlight the most representative examples of transition-metal (TM)-free and TM-catalyzed mechanosynthesis of some functional polymers, such as semiconductive polymers, porous polymeric materials, sensory materials, materials for photovoltaics, etc.

On-surface synthesis and spontaneous segregation of conjugated tetraphenylethylene macrocycles

Creating conjugated macrocycles has attracted extensive research interest because their unique chemical and physical properties, such as conformational flexibility, intrinsic inner cavities and aromaticity/antiaromaticity, make these systems appealing building blocks for functional supramolecular materials. Here, we report the synthesis of four-, six- and eight-membered tetraphenylethylene (TPE)-based macrocycles on Ag(111) via on-surface Ullmann coupling reactions. The as-synthesized macrocycles are spontaneously segregated on the surface and self-assemble as large-area two-dimensional mono-component supramolecular crystals, as characterized by scanning tunneling microscopy (STM). We propose that the synthesis benefits from the conformational flexibility of the TPE backbone in distinctive multi-step reaction pathways. This study opens up opportunities for exploring the photophysical properties of TPE-based macrocycles.

Synthesis of Dendronized Polymers on the Au(111) Surface

Dendronized polymers (DPs) consist of a linear polymeric backbone with dendritic side chains. Fine-tuning of the functional groups in the side chains enriches the structural versatility of the DPs and imparts a variety of novel physical properties. Herein, the first on-surface synthesis of DPs is achieved via the postfunctionalization of polymers on Au(111), in which the surface-confinement-induced planar conformation and chiral configurations were unambiguously characterized. While the dendronized monomer was synthesized in situ on Au(111), the subsequent polymerization afforded only short, cross-linked DP chains owing to multiple side reactions. The postfunctionalization approach selectively produced brominated polyphenylene backbone moieties by the deiodination polymerization of 4-bromo-4″-iodo-5'-(4-iodophenyl)-1,1':3',1″-terphenyl on Au(111), which smoothly underwent divergent cross-coupling reactions with two different isocyanides to form two types of DPs as individual long chains.

Synthesis, properties, and material hybridization of bare aromatic polymers enabled by dendrimer support

Aromatic polymers are the first-choice platform for current organic materials due to their distinct optical, electronic, and mechanical properties as well as their biocompatibility. However, bare aromatic polymer backbones tend to strongly aggregate, rendering them essentially insoluble in organic solvent. While the typical solution is to install many solubilizing substituents on the backbones, this often provokes undesired property changes. Herein, we report the synthesis of bare aromatic polymers enabled by a dendrimer support. An initiator arene containing a diterpenoid-based dendrimer undergoes Pd-catalyzed polymerization with monomers bearing no solubilizing substituents to furnish bare aromatic polymers such as polythiophenes and poly(para-phenylene)s. The high solubility of dendrimer-ligated polymers allows not only the unveiling of the properties of unsubstituted π-conjugated backbone, but also mild release of dendrimer-free aromatic polymers and even transfer of aromatic polymers to other materials, such as silica gel and protein, which may accelerate the creation of hybrid materials nowadays challenging to access.

Unsubstituted aromatic polymers are materials with multiple potential applications, but their preparation remains challenging. Here, the authors report a dendrimer-enabled synthesis of soluble bare aromatic polymers and explore their properties; these compounds can be further transformed into other materials.

Tandem Desulfurization/C-C Coupling Reaction of Tetrathienylbenzenes on Cu(111): Synthesis of Pentacene and an Exotic Ladder Polymer

Surface-confined reactions represent a powerful approach for the precise synthesis of low-dimensional organic materials. A complete understanding of the pathways of surface reactions would enable the rational synthesis of a wide range of molecules and polymers. Here, we report different reaction pathways of tetrathienylbenzene (T1TB) and its extended congener tetrakis(dithienyl)benzene (T2TB) on Cu(111), investigated using scanning tunneling microscopy, X-ray photoelectron spectroscopy, and density functional theory calculations. Both T1TB and T2TB undergo desulfurization when deposited on Cu(111) at room temperature. Deposition of T1TB at 453 K yields pentacene through desulfurization, hydrogen transfer, and a cascade of intramolecular cyclization. In contrast, for T2TB the intramolecular cyclization stops at anthracene and the following intermolecular C-C coupling produces a conjugated ladder polymer. We show that tandem desulfurization/C-C coupling provides a versatile approach for growing carbon-based nanostructures on metal surfaces.

Directing on-surface polymerization via a substrate-directed molecular template

Using a template to control the on-surface polymerization process is valuable for building functional molecular nanostructures. Here, the role of the symmetric matching between a halogen-ligand component (H₂TBrPP) and the substrate for the fabrication of a regular metal-organic structure on Cu(111) and Cu(100) surfaces was studied using scanning tunnelling microscopy (STM). Considering the formation of short-range order polymers on the Au(111) surface via the process of debromination due to the weak directing effect from the substrate to the precursors, a bilayer of ordered assembled structure of H₂TBrPP/Au(111) has been fabricated and the molecules in the top layer are guided by the first-layer molecules. Owing to the steering effect of the substrate-directed molecular template, the H₂TBrPP components in the top layer were polymerized into ordered molecular chain arrays along the given direction that is determined by the initial close-packed assembled structure of H₂TBrPP components during the post-annealing treatment.

Stepwise on-surface synthesis of thiophene-based polymeric ribbons by coupling reactions and the carbon-fluorine bond cleavage

The rational synthesis of thiophene-based cross-coupled polymers on surfaces has been attracting more attention recently. Here, we report the stepwise activation of 5,5'-(2,3-difluoro-1,4-phenylene)bis(2-bromothiophene) as a precursor to synthesize thiophene-based polymeric ribbons on the Au(111) surface. Scanning tunneling microscopy studies showed that the precursor adopted different conformations in the self-assembled structure, organometallic species, and covalent polymers. On annealing the sample at a relatively low temperature (150 °C), the conversion of the organometallic structure into a covalent product with straight lines was observed, in which the Br adatoms arranged between the neighboring chains. On further annealing the sample at 270 °C, the detached Br adatoms played a key role in promoting the C-H bond activation. The cross-linked polymer was achieved by a combination of Ullmann and dehydrogenative coupling. When the annealing temperature was up to 390 °C, the C-F bond activation was triggered, which led to the formation of polymeric ribbons resulting from the cyclodehydrogenation of the fluorinated polymer. This study further supplements the reaction mechanism of thiophene-based dehalogenative, dehydrogenative and defluorinative coupling, and provides us a rational way for synthesizing cross-linked functional materials.

Nanometer-scale patterning of hard and soft interfaces: from photolithography to molecular-scale design

Many areas of modern materials chemistry, from nanoscale electronics to regenerative medicine, require design of precisely-controlled chemical environments at near-molecular scales on both hard and soft surfaces.

On-Surface Synthesis of Porphyrin-Complex Multi-Block Co-Oligomers by Defluorinative Coupling

On-surface chemical reaction has become a very powerful technique to synthesize nanostructures by linking small molecules in the bottom-up approach. Given the fact that most reactants are simultaneously activated at certain temperatures, a sequential reaction in a controlled way has remained challenging. Here, we present an on-surface synthesis of multi-block co-oligomers from trifluoromethyl (CF₃ ) substituted porphyrin metal complexes. The oligomerization on Au(111) is demonstrated with a combination of bond-resolved scanning probe microscopy and density functional theory (DFT) calculations. Even after the first oligomerization of single monomer unit, the termini of the oligomer keep the CF₃ group, which can be used as a reactant for further coupling in a sequential order. Consequently, copper, cobalt, and palladium complexes of bisanthracene-fused porphyrin oligomers were linked with each other in a designed order.

Adatoms in the Surface-Confined Ullmann Coupling of Phenyl Groups

Despite the importance of the on-surface Ullmann coupling for synthesis of atomically precise carbon nanostructures, it is still unclear whether this reaction is catalyzed by surface atoms or adatoms. Here, the feasibility of the adatom creation and adatom-catalyzed Ullmann coupling of chloro-, bromo-, and iodobenzene on Cu(111), Ag(111), and Au(111) surfaces is examined using density functional theory modeling. The extraction of a metal atom is found to be greatly facilitated by the formation of strong phenyl-metal bonds, making the extraction energy barrier comparable to, and in the case of Ag(111) even lower than, that for the competing surface-catalyzed phenyl-phenyl bond formation. However, if the phenyl-adatom bonds are too strong, as on Cu(111) and Ag(111), they create an insurmountable barrier for the subsequent adatom-catalyzed C-C coupling. In contrast, Au adatoms do not bind phenyl groups strongly and can catalyze the C-C bond formation almost as efficiently as surface atoms.

Light assisted synthesis of poly-para-phenylene on Ag(001)

A detailed study of poly-para-phenylene (PPP) obtained by light-assisted on-surface-synthesis (OSS) on Ag(100) was carried out by scanning tunneling microscopy and spectroscopy together with density functional theory calculations. The use of light in combination with heat allows to lower by 50 K annealing temperature the each stage of the Ullmann coupling. Debromination of the 4,4″ dibromo-p-terphenyl precursors was thus realized at 300 K, the formation of the first oligomers from the organometallic intermediate by silver bridging atom release at 423 K and PPP by complete elimination of the silver at 473 K. This approach to lower the reaction temperature permits to enhance the Ag(100) surface reactivity to become comparable to that of Cu(111). The underlying mechanism of light effect was proposed to occur via surface mediated excitation, with the creation of photoexcited electrons known as hot electrons correlated with surface plasmon excitation. This original pathway combining both light and heat provides an additional parameter to control OSS by separating the precursor activation stage from the diffusion.

Conformational evolution following the sequential molecular dehydrogenation of PMDI on a Cu(111) surface

Molecular spatial conformational evolution following the corresponding chemical reaction pathway at surfaces is important to understand and optimize chemical processes. Combining experimental and theoretical methods, the sequential N-H and C-H dehydrogenation of pyromellitic diimide (PMDI) on a Cu(111) surface are reported. STM experiments and atomistic modeling allow structural analysis at each well-defined reaction step. First, exclusively the aromatic N-H dehydrogenation of the imide group is observed. Subsequently, the C-H group at the benzene core of PMDI gets activated leading to a dehydrogenation reaction forming metalorganic species where Cu adatoms pronouncedly protruding from the surface are coordinated by one or two PMDI ligands at the surface. All reactions of PMDI induce conformational changes at the surface as confirmed by STM imaging and DFT simulations. Such conformational evolution in sequential N-H and C-H activation provides a detailed insight to understand molecular dehydrogenation processes at surfaces.

Identification of Topotactic Surface-Confined Ullmann-Polymerization

On-surface Ullmann coupling is an established method for the synthesis of 1D and 2D organic structures. A key limitation to obtaining ordered polymers is the uncertainty in the final structure for coupling via random diffusion of reactants over the substrate, which leads to polymorphism and defects. Here, a topotactic polymerization on Cu(110) in a series of differently-halogenated para-phenylenes is identified, where the self-assembled organometallic (OM) reactants of diiodobenzene couple directly into a single, deterministic product, whereas the other precursors follow a diffusion driven reaction. The topotactic mechanism is the result of the structure of the iodine on Cu(110), which controls the orientation of the OM reactants and intermediates to be the same as the final polymer chains. Temperature-programmed X-ray photoelectron spectroscopy and kinetic modeling reflect the differences in the polymerization regimes, and the effects of the OM chain alignments and halogens are disentangled by Nudged Elastic Band calculations. It is found that the repulsion or attraction between chains and halogens drive the polymerization to be either diffusive or topotactic. These results provide detailed insights into on-surface reaction mechanisms and prove the possibility of harnessing topotactic reactions in surface-confined Ullmann polymerization.

On-Surface Decarboxylation Coupling Facilitated by Lock-to-Unlock Variation of Molecules upon the Reaction

On-surface synthesis (OSS) involving relatively high energy barriers remains challenging due to a typical dilemma: firm molecular anchor is required to prevent molecular desorption upon the reaction, whereas sufficient lateral mobility is crucial for subsequent coupling and assembly. By locking the molecular precursors on the substrate then unlocking them during the reaction, we present a strategy to address this challenge. High-yield synthesis based on well-defined decarboxylation, intermediate transition, and hexamerization is demonstrated, resulting in an extended and ordered network exclusively composed of the newly synthesized macrocyclic compound. Thanks to the steric hindrance of its maleimide group, we attain a preferential selection of the coupling. This work unlocks a promising path to enrich the reaction types and improve the coupling selectivity hence the structual homogeneity of the final product for OSS.

Atomically precise graphene nanoribbons: interplay of structural and electronic properties

Graphene nanoribbons hold great promise for future applications in nanoelectronic devices, as they may combine the excellent electronic properties of graphene with the opening of an electronic band gap - not present in graphene but required for transistor applications. With a two-step on-surface synthesis process, graphene nanoribbons can be fabricated with atomic precision, allowing precise control over width and edge structure. Meanwhile, a decade of research has resulted in a plethora of graphene nanoribbons having various structural and electronic properties. This article reviews not only the on-surface synthesis of atomically precise graphene nanoribbons but also how their electronic properties are ultimately linked to their structure. Current knowledge and considerations with respect to precursor design, which eventually determines the final (electronic) structure, are summarized. Special attention is dedicated to the electronic properties of graphene nanoribbons, also in dependence on their width and edge structure. It is exactly this possibility of precisely changing their properties by fine-tuning the precursor design - offering tunability over a wide range - which has generated this vast research interest, also in view of future applications. Thus, selected device prototypes are presented as well.

Initiating Ullmann-like coupling of Br2Py by a semimetal surface

Intensive efforts have been devoted to surface Ullmann-like coupling in recent years, due to its appealing success towards on-surface synthesis of tailor-made nanostructures. While attentions were mostly drawn on metallic substrates, however, Ullmann dehalogenation and coupling reaction on semimetal surfaces has been seldom addressed. Herein, we demonstrate the self-assembly of 2, 7-dibromopyrene (Br₂Py) and the well controllable dehalogenation reaction of Br₂Py on the Bi(111)–Ag substrate with a combination of scanning tunnelling microscopy (STM) and density functional theory calculations (DFT). By elaborately investigating the reaction path and formed organic nanostructures, it is revealed that the pristinely inert bismuth layer supported on the silver substrate can initiate Ullmann-like coupling in a desired manner by getting alloyed with Ag atoms underneath, while side products have not been discovered. By clarifying the pristine nature of Bi–Ag(111) and Ullmann-like reaction mechanisms, our report proposes an ideal template for thoroughly exploring dehalogenative coupling reaction mechanisms with atomic insights and on-surface synthesis of carbon-based architectures.

Structural characterisation of molecular conformation and the incorporation of adatoms in an on-surface Ullmann-type reaction

The on-surface synthesis of covalently bonded materials differs from solution-phase synthesis in several respects. The transition from a three-dimensional reaction volume to quasi-two-dimensional confinement, as is the case for on-surface synthesis, has the potential to facilitate alternative reaction pathways to those available in solution. Ullmann-type reactions, where the surface plays a role in the coupling of aryl-halide functionalised species, has been shown to facilitate extended one- and two-dimensional structures. Here we employ a combination of scanning tunnelling microscopy (STM), X-ray photoelectron spectroscopy (XPS) and X-ray standing wave (XSW) analysis to perform a chemical and structural characterisation of the Ullmann-type coupling of two iodine functionalised species on a Ag(111) surface held under ultra-high vacuum (UHV) conditions. Our results allow characterisation of molecular conformations and adsorption geometries within an on-surface reaction and provide insight into the incorporation of metal adatoms within the intermediate structures of the reaction.

Oxygen-Induced 1D to 2D Transformation of On-Surface Organometallic Structures

While surface-confined Ullmann-type coupling has been widely investigated for its potential to produce π-conjugated polymers with unique properties, the pathway of this reaction in the presence of adsorbed oxygen has yet to be explored. Here, the effect of oxygen adsorption between different steps of the polymerization reaction is studied, revealing an unexpected transformation of the 1D organometallic (OM) chains to 2D OM networks by annealing, rather than the 1D polymer obtained on pristine surfaces. Characterization by scanning tunneling microscopy and X-ray photoelectron spectroscopy indicates that the networks consist of OM segments stabilized by chemisorbed oxygen at the vertices of the segments, as supported by density functional theory calculations. Hexagonal 2D OM networks with different sizes on Cu(111) can be created using precursors with different length, either 4,4″-dibromo-p-terphenyl or 1,4-dibromobenzene (dBB), and square networks are obtained from dBB on Cu(100). The control over size and symmetry illustrates a versatile surface patterning technique, with potential applications in confined reactions and host-guest chemistry.

Synthesis of mesoscale ordered two-dimensional π-conjugated polymers with semiconducting properties

Two-dimensional materials with high charge carrier mobility and tunable band gaps have attracted intense research effort for their potential use in nanoelectronics. Two-dimensional π-conjugated polymers constitute a promising subclass because the band structure can be manipulated by varying the molecular building blocks while preserving key features such as Dirac cones and high charge mobility. The major barriers to the application of two-dimensional π-conjugated polymers have been the small domain size and high defect density attained in the syntheses explored so far. Here, we demonstrate the fabrication of mesoscale ordered two-dimensional π-conjugated polymer kagome lattices with semiconducting properties, Dirac cone structures and flat bands on Au(111). This material has been obtained by combining a rigid azatriangulene precursor and a hot dosing approach, which favours molecular diffusion and eliminates voids in the network. These results open opportunities for the synthesis of two-dimensional π-conjugated polymer Dirac cone materials and their integration into devices.

On-Surface Synthesis of All-cis Standing Phenanthrene Polymers upon Selective C-H Bond Activation

On-surface synthesis has emerged as a powerful approach to the atomically precise fabrication of molecular architectures with potential applications in nanotechnology. However, it is challenging to synthesize molecular structures that can protrude from the surface such as polymer chains forming by the molecules with upright conformations, since most of the on-surface reaction products, particularly the conjugated structures, prefer to adsorb parallel on the surface to maximize the molecule-substrate interaction. Here, we show an up-standing phenanthrene polymer chain with an all-cis configuration obtained by on-surface synthesis upon highly selective C-H activation. Using bond-resolved nc-AFM imaging, the reaction route of polymers from an in-plane to an all-cis upright conformation is fully characterized, and the reaction mechanism is further revealed in combination with first principles calculations. Our results on this selective dehydrogenation induced upright-oriented polymer chains that will enrich the toolbox for the on-surface synthesis of novel molecular structures and may provide new insights on designing optimized precursors for preparing three-dimensional molecular frameworks through on-surface synthesis.

Surface-Confined Macrocyclization via Dynamic Covalent Chemistry

Surface-confined synthesis is a promising approach to build complex molecular nanostructures including macrocycles. However, despite the recent advances in on-surface macrocyclization under ultrahigh vacuum, selective synthesis of monodisperse and multicomponent macrocycles remains a challenge. Here, we report on an on-surface formation of [6 + 6] Schiff-base macrocycles via dynamic covalent chemistry. The macrocycles form two-dimensional crystalline domains on the micrometer scale, enabled by dynamic conversion of open-chain oligomers into well-defined ∼3.0 nm hexagonal macrocycles. We further show that by tailoring the length of the alkyl substituents, it is possible to control which of three possible products-oligomers, macrocycles, or polymers-will form at the surface. In situ scanning tunneling microscopy imaging combined with density functional theory calculations and molecular dynamics simulations unravel the synergistic effect of surface confinement and solvent in leading to preferential on-surface macrocyclization.

On-surface synthesis of gold–coronene molecular wires

Perchlorocoronene undergoes selective dehalogenation under the one-dimensional constraint by intermolecular interactions, resulting in the formation of gold–coronene wires on Au(111) surfaces.

On-Surface Activation of Trimethylsilyl-Terminated Alkynes on Coinage Metal Surfaces

The controlled attachment of protecting groups combined with the ability to selectively abstract them is central to organic synthesis. The trimethylsilyl (TMS) functional group is a popular protecting group in solution. However, insights on its activation behavior under ultra-high vacuum (UHV) and surface-confined conditions are scarce. Here we investigate a series of TMS-protected alkyne precursors via scanning tunneling microscopy (STM) regarding their compatibility with organic molecular beam epitaxy (OMBE) and their potential deprotection on various coinage metal surfaces. After in-situ evaporation on the substrates held in UHV at room temperature, we find that all molecules arrived and adsorbed as intact units forming ordered supramolecular aggregates stabilized by non-covalent interactions. Thus, TMS-functionalized alkyne precursors with weights up to 1100 atomic mass units are stable against OMBE evaporation in UHV. Furthermore, the TMS activation through thermal annealing is investigated with STM and X-ray photoelectron spectroscopy (XPS). We observe that deprotection starts to occur between 400 K and 500 K on the copper and gold surfaces, respectively. In contrast, on silver surfaces, the TMS-alkyne bond remains stable up to temperatures where molecular desorption sets in (≈600 K). Hence, TMS functional groups can be utilized as leaving groups on copper and gold surfaces while they serve as protecting groups on silver surfaces.

Cleaning up after the Party: Removing the Byproducts of On-Surface Ullmann Coupling

Ullmann coupling is one of the most frequently employed methodologies for producing π-conjugated surface-confined polymers. One unfortunate side product of the reaction is the creation of metal halide islands formed from liberated halogen atoms. Following the coupling reaction, these halide islands can account for a large proportion of the substrate surface area and thus inhibit domain growth and effectively poison the catalyst. Here, we describe an efficient and reliable methodology for removing the halogen byproduct at room temperature by exposure to a beam of atomic hydrogen; this action removes the halogen atoms in a matter of minutes, with minimal impact to the polymer structure. We also find that it is possible under certain circumstances to preserve the pre-exposure epitaxy after removal of the halogen. This finding provides a convenient and straightforward technique for addressing the most often-cited drawback of the on-surface Ullman coupling methodology and provides access to a previously inaccessible parameter space for these types of experiments.

Surface-Confined Self-Assembly of Asymmetric Tetratopic Molecular Building Blocks

Surface-confined self-assembly of functional molecular building blocks has recently been widely used to create low-dimensional, also covalent, superstructures with tailorable geometry and physicochemical properties. In this contribution, using the lattice Monte Carlo simulation method, we demonstrate how the structure-property relation can be established for the 2D self-assembly of a model tetrapod molecule with reduced symmetry. To that end, a rigid functional unit comprising a few interconnected segments arranged in different tetrapod shapes was used and its self-assembly on a triangular lattice representing a (111) crystal surface was simulated. The results of our calculations show strong dependence of the structure formation on the molecular symmetry, in particular on the (pro)chiral nature of the building block. The simulations predicted the formation of unusual ordered racemic networks with unique aperiodic spatial distribution of the surface enantiomers. Molecular symmetry was also found to have significant influence on the enantiopure self-assembly which resulted in the Kagome and brickwall networks and other less ordered extended superstructures with parallelogram pores. The theoretical findings of this contribution can be relevant to designing and on-surface synthesis of molecular superstructures with predefined geometries and functions. In particular, the predicted molecular architectures can stimulate experimental efforts to fabricate and explore new nanostructures, for example graphitic, having the composition and geometry proposed in our study.

On-surface synthesis of 2D COFs on Cu(111) via the formation of thermodynamically stable organometallic networks as the template

Template-directed polymerization is an effective approach used to afford regular 2D covalent organic frameworks (COFs), thus the regularity of the template is crucial for the quality of the resulting 2D COFs. For the Ullmann reactions on Cu(111), aryl iodides and bromides are activated at low temperature to form organometallic C-Cu-C structures, which lead to kinetic trapping and irregular organometallic networks. Therefore, the subsequent annealing step can only afford irregular 2D COFs. In this manuscript, the molecule 4,4''-dibromo-5'-(4-chlorophenyl)-1,1':3',1''-terphenyl incorporated two Br terminals and one Cl terminal has been used to demonstrate different reactivities of a C-Cl bond and a C-Br bond via the hierarchical activation of the C-Br bond and the C-Cl bond on Cu(111). At room temperature, zigzag, armchair, and ring-like organometallic chains formed due to the activation of the C-Br bond to generate a C-Cu-C structure while C-Cl remained intact, illustrating that the C-Cl bond is more stable than C-Br. Further annealing at 433 K activated the C-Cl bond to produce regular organometallic networks as the thermodynamic product. Using the simpler molecule 1,3,5-tris(4-chlorophenyl)benzene as the precursor, the self-assembly of the intact molecules was observed on Cu(111) at 300 K without activation of the C-Cl bond. After annealing at 433 K, similar thermodynamically stable organometallic networks formed directly, which were used as a template to generate regular 2D COFs upon further annealing at 510 K.

On-Surface Synthesis within a Porphyrin Nanoring Template

On-surface synthesis provides a route for the production of 1D and 2D covalently bonded polymeric structures. Such reactions are confined to the surface of a substrate and the catalytic properties of the substrate are often utilised to initiate the reaction. Recent studies have focused on the properties of various crystallographic planes of metallic substrates, as well as native surface features such as step-edges, in an effort to provide control over the pathway of the reaction and the resultant products. An alternative approach is to template the catalytic surface with a porous molecular overlayer; giving rise to well-defined surface regions within which an on-surface reaction may be confined. Here we present a methodology where macromolecular templates are used to confine an on-surface reaction. Cyclic porphyrin polymers, nanorings - consisting of 40 porphyrin units with internal diameter 13 nm, are used to form a template on a Au(111) surface, and an on-surface Ullmann-type coupling reaction is initiated within the nanoring template. The surface confined template and covalently coupled reaction products are investigated and characterised with scanning tunnelling microscopy.

On-Surface Synthesis of One-Dimensional Carbon-Based Nanostructures via C-X and C-H Activation Reactions

The past decades have witnessed the emergence of low-dimensional carbon-based nanostructures owing to their unique properties and various subsequent applications. It is of fundamental importance to explore ways to achieve atomically precise fabrication of these interesting structures. The newly developed on-surface synthesis approach provides an efficient strategy for this challenging issue, demonstrating the potential of atomically precise preparation of low-dimensional nanostructures. Up to now, the formation of various surface nanostructures, especially carbon-based ones, such as graphene nanoribbons (GNRs), kinds of organic (organometallic) chains and films, have been achieved via on-surface synthesis strategy, in which in-depth understanding of the reaction mechanism has also been explored. This review article will provide a general overview on the formation of one-dimensional carbon-based nanostructures via on-surface synthesis method. In this review, only a part of the on-surface chemical reactions (specifically, C-X (X=Cl, Br, I) and C-H activation reactions) under ultra-high vacuum conditions will be covered.