Graphene: a reusable substrate for unprecedented adsorption of pesticides

An Updated Review on Functionalized Graphene as Sensitive Materials in Sensing of Pesticides

Numerous chemical pesticides were employed for a long time to manage pests, but their uncontrolled application harmed the health and the environment. Accurately quantifying pesticide residues is essential for risk evaluation and regulatory purposes. Numerous analytical methods have been developed and utilized to achieve sensitive and specific detection of pesticides in intricate sampl es like water, soil, food, and air. Electrochemical sensors based on amperometry, potentiometry, or impedance spectroscopy offer portable, rapid, and sensitive detection suitable for on-site analysis. This study examines the potential of electrochemical sensors for the accurate evaluation of various effects of pesticides. Emphasizing the use of Graphene (GR), Graphene Oxide (GO), Reduced Graphene Oxide (rGO), and Graphdiyne composites, the study highlights their enhanced performance in pesticide sensing by stating the account of many actual sensors that have been made for specific pesticides. Computational studies provide valuable insights into the adsorption kinetics, binding energies, and electronic properties of pesticide-graphene complexes, guiding the design and optimization of graphene-based sensors with improved performance. Furthermore, the discussion extends to the emerging field of biopesticides. While the GR/GO/rGO based sensors hold immense future prospects, and their existing limitations have also been discussed, which need to be solved with future research.

Graphene as a nano-delivery vehicle in agriculture - current knowledge and future prospects

Graphene has triggered enormous interest in, and exploration of, its applications in diverse areas of science and technology due to its unique properties. While graphene has displayed great potential as a nano-delivery system for drugs and biomolecules in biomedicine, its application as a nanocarrier in agriculture has only begun to be explored. Conventional fertilizers and agricultural delivery systems have a number of disadvantages, such as: fast release of the active ingredient, low delivery efficiency, rapid degradation and low stability that often leads to their over-application and consequent environmental problems. Advanced nano fertilizers with high carrier efficiency and slow and controlled release are now considered the gold standard for promoting agricultural sustainability while protecting the environment. Graphene's attractive properties include large surface area, chemical stability, mechanical stability, tunable surface chemistry and low toxicity making it a promising material on which to base agricultural delivery systems. Recent research has demonstrated considerable success in the use of graphene for agricultural applications, including its utilization as a delivery vehicle for plant nutrients and crop protection agents, as well as in post-harvest management of crops. This review, therefore, presents a comprehensive overview of the current status of graphene-based nanocarriers in agriculture. Additionally, the review outlines the surface functionalization methods used for effective molecular delivery, various strategies for nano-vehicle design and the underlying features necessary for a graphene-based agro-delivery system. Finally, the review discusses directions for further research in optimization of graphene-based nanocarriers.

Functional graphene oxide for organic pollutants removal from wastewater: a mini review

Graphene oxide (GO), an important derivative of graphene, with a variety of active oxygen-containing groups (hydroxyl, carboxyl and epoxy) on its surface is easy to be functionalized to obtain adsorbent with high adsorption capacity. To date, the adsorption behaviour of organic pollutants by functionalized GO adsorbents have been extensively studied, but there has been no systematic review regarding the functionalization method of GO for the purpose to remove organic pollutants from wastewater. The leading objective of this review is to (i) summarize the functionalization strategies of GO for organic pollutants removal (covalent functionalization and non-covalent functionalization), (ii) evaluate the adsorption performance of functional GO towards organic pollutants by taking aromatic pollutants and dyes as examples and (iii) discuss the regeneration property and adsorption mechanism of functional GO adsorbent. In addition, the problems of existing studies and future research directions are also identified briefly.

How Well Do Our Adsorbents Actually Perform?-The Case of Dimethoate Removal Using Viscose Fiber-Derived Carbons

Growing pollution is making it necessary to find new strategies and materials for the removal of undesired compounds from the environment. Adsorption is still one of the simplest and most efficient routes for the remediation of air, soil, and water. However, the choice of adsorbent for a given application ultimately depends on its performance assessment results. Here, we show that the uptake of and capacity for dimethoate adsorption by different viscose-derived (activated) carbons strongly depend on the adsorbent dose applied in the adsorption measurements. The specific surface areas of the investigated materials varied across a wide range from 264 m² g^-1 to 2833 m² g^-1. For a dimethoate concentration of 5 × 10^-4 mol L^-1 and a high adsorbent dose of 10 mg mL^-1, the adsorption capacities were all below 15 mg g^-1. In the case of high-surface-area activated carbons, the uptakes were almost 100% under identical conditions. However, when the adsorbent dose was reduced to 0.01 mg mL^-1, uptake was significantly reduced, but adsorption capacities as high as 1280 mg g^-1 were obtained. Further, adsorption capacities were linked to adsorbents' physical and chemical properties (specific surface area, pore size distribution, chemical composition), and thermodynamic parameters for the adsorption process were evaluated. Based on the Gibbs free energy of the adsorption process, it can be suggested that physisorption was operative for all studied adsorbents. Finally, we suggest that a proper comparison of different adsorbents requires standardization of the protocols used to evaluate pollutant uptakes and adsorption capacities.

Potential and Progress of 2D Materials in Photomedicine for Cancer Treatment

Over the last decades, photomedicine has made a significant impact and progress in treating superficial cancer. With tremendous efforts many of the technologies have entered clinical trials. Photothermal agents (PTAs) have been considered as emerging candidates for accelerating the outcome from photomedicine based cancer treatment. Besides various inorganic and organic candidates, 2D materials such as graphene, boron nitride, and molybdenum disulfide have shown significant potential for photothermal therapy (PTT). The properties such as high surface area to volume, biocompatibility, stability in physiological media, ease of synthesis and functionalization, and high photothermal conversion efficiency have made 2D nanomaterials wonderful candidates for PTT to treat cancer. The targeting or localized activation could be achieved when PTT is combined with chemotherapies, immunotherapies, or photodynamic therapy (PDT) to provide better outcomes with fewer side effects. Though significant development has been made in the field of phototherapeutic drugs, several challenges have restricted the use of PTT in clinical use and hence they have not yet been tested in large clinical trials. In this review, we attempted to discuss the progress, properties, applications, and challenges of 2D materials in the field of PTT and their application in photomedicine.

Interactions of airborne graphene oxides with the sexual reproduction of a model plant: When production impurities matter

The increasing use of graphene-related materials (GRMs) in everyday-life products raises concerns for their possible release into the environment and consequent impact on organisms. GRMs have widely varying effects on plants and, according to recent evidences, graphene oxide (GO) has the potential to interfere with the sexual reproduction owing to its acidic properties and production residues. Here, stigmas of the model plant Cucurbita pepo (summer squash) were subjected to simulated dry depositions of GO and GO purified from production residues (PGO). Stigmas were then hand-pollinated and GRM deposition was checked by ESEM and confocal microscopy. Analysis of stigma integrity, pH homeostasis and pollen-stigma interactions did not reveal negative effects. Fruit and seed production were not affected, but GO depositions of 22.1 ± 7.2 ng mm^-2 affected the normal development of seeds, decreasing seed dimensions, seed germination and germination speed. The elemental analysis revealed that GO has significant quantities of production residues, such as strong acids and oxidants, while PGO has only traces, which justifies the differences observed in the effects caused by the two materials. Our results show that GO depositions of up to 11.1 ± 3.6 ng mm^-2, which fall within the variation range of total dry particulate matter depositions reported in the literature, are safe for reproduction of C. pepo. This is the first "safety" limit ever recorded for depositions of "out-of-the-box" GO concerning the reproduction of a seed plant. If confirmed for wind-pollinated species, it might be considered for policymaking of GRMs emissions in the air.

Functionalization of graphene nanostructures with inorganic nanoparticles and their use for the removal of pharmaceutical pollutants in water

Emerging pollutants such as pharmaceuticals are of special concern because despite their low environmental concentration, their biological activity can be intense, and they should be prevented to reach uncontrolledly to the environment. A graphene-based hybrid material decorated with Fe3O4 and TiO2 nanoparticles (NPs) has been prepared to effectively remove emerging pollutants as nonsteroidal anti-inflammatory drugs (NSAIDs) Ibuprofen and Diclofenac present in water at low environmental concentrations by a one-step functionalization process following a novel gentle and scalable surfactant depletion approach. Following this methodology, nanoparticles are progressively deprived of their original surfactant in the presence of graphene, leading to the formation of hybrid nanostructures composed of two different types of nanoparticles well dispersed over the graphene nanosheets. Ibuprofen and Diclofenac adsorption kinetics on the composites was investigated via UV-Vis spectroscopy. The as prepared hybrid material possesses high adsorption capacity, superparamagnetic properties, photocatalytic behavior, and good water dispersibility. Thanks to incorporating TiO2 nanoparticles as in situ catalysts, the adsorption performance of composites is restored after use, which could be a promising recycling pathway for the adsorbents in wastewater treatments.

Enhanced and sustained pesticidal activity of a graphene-based pesticide delivery system against the diamondback moth Plutella xylostella

BACKGROUND

Traditional abamectin (Abm) formulations have several shortcomings, such as low water solubility, burst release behavior, poor photostability, and short persistence periods, which decrease their pesticidal activity and the risks they pose to the environment. Nanomaterial-based pesticide delivery systems (PDSs) provide new strategies for the efficient and safe application of pesticides. Here, we developed Abm-loaded graphene oxide (Abm/GO) as a PDS for the sustained release of Abm, which shows enhanced control efficacy against Plutella xylostella.

RESULTS

The hydrophobic Abm molecule was effectively loaded on GO nanocarrier by a physisorption method, which formed a uniform and stable Abm/GO nanoformulation. GO possesses high adsorption capacity and can effectively load Abm. The Abm/GO nanoformulation shows enhanced water dispersion stability and can remain stable during a 2-year storage period in contrast to the water-insoluble Abm. In addition, the Abm/GO nanoformulation exhibits sustained pesticide release behavior and possesses significantly improved anti-ultraviolet properties. Thus, the Abm/GO nanoformulation shows superior pesticidal activity compared with Abm. Abm/GO showed negligible toxicity to maize seedlings, and its GO nanocarrier can reduce the cytotoxicity of Abm to A549 cells.

CONCLUSION

GO-based PDSs can effectively overcome the disadvantages of traditional pesticides, such as their insolubility, burst release behavior, instability, and short persistence period. GO shows much future promise in agriculture in light of its industrialization potential. © 2022 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Root Hair Apex is the Key Site for Symplastic Delivery of Graphene into Plants

Uptake kinetics and delivery mechanisms of nanoparticles (NPs) in crop plants need to be urgently understood for the application of nanotechnology in agriculture as delivery systems for eco-friendly nanoagrochemicals. Here, we investigated the uptake kinetics, translocation pathway, and key internalization process of graphene in wheat (Triticum aestivum L.) by applying three specific hydroponic cultivation methods (submerging, hanging, and split-root). Quantification results on the uptake of carbon-14 radiolabeled graphene in each tissue indicated that graphene could enter the root of wheat and further translocate to the shoot with a low delivery rate (<2%). Transmission electron microscopy (TEM) images showed that internalized graphene was transported to adjacent cells through the plasmodesmata, clearly indicating the symplastic pathway of graphene translocation. The key site for the introduction of graphene into root cells for translocation through the symplastic pathway is evidenced to be the apex of growing root hair, where the newly constructed primary cell wall is much thinner. The confirmation of uptake kinetics and delivery mechanisms is useful for the development of nanotechnology in sustainable agriculture, especially for graphene serving as the delivery vector for pesticides, genes, and sensors.

Recent Advances and Perspectives on the Sources and Detection of Antibiotics in Aquatic Environments

Water quality and safety are vital to the ecological environment, social development, and ecological susceptibility. The extensive use and continuous discharge of antibiotics have caused serious water pollution; antibiotics are widely found in freshwater, drinking water, and reservoirs; and this pollution has become a common phenomenon and challenge in global water ecosystems, as water polluted by antibiotics poses serious risks to human health and the ecological environment. Therefore, the antibiotic content in water should be identified, monitored, and eliminated. Nevertheless, there is no single method that can detect all different types of antibiotics, so various techniques are often combined to produce reliable results. This review summarizes the sources of antibiotic pollution in water, covering three main aspects: (1) wastewater discharges from domestic sewage, (2) medical wastewater, and (3) animal physiology and aquaculture. The existing analytical techniques, including extraction techniques, conventional detection methods, and biosensors, are reviewed. The electrochemical biosensors have become a research hotspot in recent years because of their rapid detection, high efficiency, and portability, and the use of nanoparticles contributes to these outstanding qualities. Additionally, the comprehensive quality evaluation of various detection methods, including the linear detection range, detection limit (LOD), and recovery rate, is discussed, and the future of this research field is also prospected.

Carbon-Based Nanomaterials for Sustainable Agriculture: Their Application as Light Converters, Nanosensors, and Delivery Tools

Nano-enabled agriculture is now receiving increasing attentions. Among the used nanomaterials, carbon-based nanomaterials are good candidates for sustainable agriculture. Previous review papers about the role of carbon-based nanomaterials in agriculture are either focused on one type of carbon-based nanomaterial or lack systematic discussion of the potential wide applications in agriculture. In this review, different types of carbon-based nanomaterials and their applications in light converters, nanosensors, and delivery tools in agriculture are summarized. Possible knowledge gaps are discussed. Overall, this review helps to better understand the role and the potential of carbon-based nanomaterials for nano-enabled agriculture.

Matrix-dispersed magnetic molecularly-imprinted polyaniline for the effective removal of chlorpyrifos pesticide from contaminated water

We report a new adsorbent nanocomposite material based on matrix-dispersed superparamagnetic iron oxide nanoparticles (SPIONs) in molecularly-imprinted polyaniline for the removal of chlorpyrifos (CPF), a hazardous organophosphate pesticide, from water. The synthesized magnetic molecularly-imprinted polymer (MMIP) was characterized by FTIR spectroscopy, XRD, magnetic susceptibility, DLS, zeta potential measurement, SEM and high-resolution TEM imaging. The average size of the naked SPIONs ranges from 15 to 30 nm according to the high-resolution TEM analysis. Moreover, the adsorption kinetics, thermodynamic parameters (ΔG, ΔH and ΔS), adsorption isotherms and rebinding conditions were investigated in detail. The proposed MMIP has an imprinting factor of 1.64. In addition, it showed a high experimental adsorption capacity of 1.77 mg g⁻¹ and a removal efficiency of nearly 80%. The fabricated MMIP material demonstrated excellent magnetic susceptibility allowing for easy separation using an external magnetic field. The adsorption mechanism of CPF onto the MMIP adsorbent followed the second-order kinetics model and fitted to the Temkin adsorption isotherm. By studying the adsorption thermodynamics, negative ΔG values (−1.955 kJ mol⁻¹ at room temperature) were obtained revealing that the adsorption process is spontaneous. Furthermore, the maximum adsorption capacity was obtained at room temperature (ca. 303 K), neutral pH and using a high CPF concentration.

An efficient magnetic molecularly-imprinted polymer adsorbent for removal of chlorpyrifos organophosphate pesticide from water is reported.

GO-based antibacterial composites: Application and design strategies

Graphene oxide (GO), for its unique structure with high biocompatibility and designability, is widely used in the antibacterial field. Various strategies have been designed to fabricate GO-based composites with antibacterial properties. This review summarized these strategies, divided them into three types and interpreted their antibacterial mechanisms: (i) "GO*/non-GO" type in which GO acts as the single antibacterial core, (ii) "GO*/non-GO*" type in which GO and non-GO components function synergistically as dual antibacterial cores, (iii) "GO/non-GO*" type in which non-GO acts as the single antibacterial core, while GO component plays a supportive, not a dominant role in antibiosis. Besides, the fields suiting their applications and factors influencing their antibacterial properties were analyzed. Finally, the limitations and prospects in the current researches were discussed. In summary, GO-based composites have revolutionized antibacterial strategies. This review may serve as a reference to inspire further research on GO-based antibacterial composites.

A systematic study to unravel the potential of using polysaccharides based organic-nanoparticles versus hybrid-nanoparticles for pesticide delivery

To daze conventional pesticide release limitations, nanotechnology-mediated pesticide delivery using natural polymers has been actively investigated. However, the lack of information on what are the beneficial/non-beneficial aspects of using hybrid- and organic-nanoparticles (NP) and among the polysaccharides which are better suited concerning pesticide loading efficiency (PLE wt%), entrapment efficiency, and sustained pesticide release (SPR %) has prompted us to investigate this study. In this report, we systematically investigated a series of polysaccharides such as starch (S), cellulose (C), aminocellulose (AC), and sodium carboxymethylcellulose (NaCMC) coated on magnetite NP (MNP, Fe₃O₄) and complete organic nanocarrier systems (starch and cellulose) that have no MNP part were compared for the PLE wt% and SPR % efficiencies for chlorpyrifos (ChP) insecticide. Overall, all nanocarriers (NCs) have shown good to excellent PLE wt% due to the smaller-sized NP obtained through optimal conditions. However, among the hybrid polysaccharides studied, starch MNP has shown a maximum PLE of 111 wt% in comparison with other polysaccharides (80-94 wt%) coated hybrid-NCs as well as with organic-NCs (81-87 wt%). The use of inorganic support does improve the PLE wt% markedly for starch but not for cellulose derivatives. Similarly, the SPR results of S-NP showed a remarkably better sustained release profile for ChP of 88% in 14 d. In contrast, other unfunctionalized and functionalized celluloses exhibited poor release profiles of 60%-20% for the same period. This study may help the researchers choose the right system for designing and achieving enhanced pesticide efficiency.

A Laser Reduced Graphene Oxide Grid Electrode for the Voltammetric Determination of Carbaryl

Laser-reduced graphene oxide (LRGO) on a polyethylene terephthalate (PET) substrate was prepared in one step to obtain the LRGO grid electrode for sensitive carbaryl determination. The grid form results in a grid distribution of different electrochemically active zones affecting the electroactive substance diffusion towards the electrode surface and increasing the electrochemical sensitivity for carbaryl determination. Carbaryl is electrochemically irreversibly oxidized at the secondary amine moiety of the molecule with the loss of one proton and one electron in the pH range from 5 to 7 by linear scan voltammetry (LSV) on the LRGO grid electrode with a scan rate of 300 mV/s. Some interference of the juice matrix molecules does not significantly affect the LSV oxidation current of carbaryl on the LRGO grid electrode after adsorptive accumulation without applied potential. The LRGO grid electrode can be used for LSV determination of carbaryl in fruit juices in the concentration range from 0.25 to 128 mg/L with LOD of 0.1 mg/L. The fabrication of the LRGO grid electrode opens up possibilities for further inexpensive monitoring of carbaryl in other fruit juices and fruits.

Triple-Smart Eco-Friendly Chili Anthracnose Control Agro-Nanocarrier

Pesticide leaching and soil contamination are major issues in the present agriculture formulations. Hence, here 2D graphene oxide in combination with cationic, anionic, or nonionic polymers were tested for runoff resistance and targeted release behavior. Cationic polymer supplemented the binding of rGO on leaf surface by 30% more than control and reduced off-target leaching in soil by 45% more than control. Further, to enhance the fruit rot control caused by Colletotrichum capsici in chili crop, the rGO was decorated with Cu_2-xSe nanocrystals, which provided combined disease control with captan. The chitosan coating in the nanocomposite added targeted pH-responsive fungal inhibition behavior and could reduce the C. capsici growth by ∼1/2 times compared to captan control.

Photocatalytic Degradation of Phenol Using Chemical Vapor Desposition Graphene Column

In the field of wastewater treatment, the advanced oxidation process (AOP) is a widely employed method. It uses reactive oxygen species (ROS) to degrade harmful organic and inorganic chemicals. Metal catalysts are the conventional standard when using these methods. However, they have drawbacks such as harsh activation conditions and poor recyclability. We previously suggested chemical vapor deposition (CVD) graphene film as an alternative metal-free catalyst. In this study, we enhanced the catalytic activity of the CVD graphene film by synergistically adding UV light irradiation. The result was complete degradation of phenol on a wafer-scale in a reduced timeframe. To further enhance the degradation process, we devised a graphene-based column for continuous in situ chemical oxidation and analyzed the intermediates over time, proving the potential of graphene-assisted AOP in industrial wastewater applications.

Effects of Few-Layer Graphene on the Sexual Reproduction of Seed Plants: An In Vivo Study with Cucurbita pepo L

Products containing graphene-related materials (GRMs) are becoming quite common, raising concerns for environmental safety. GRMs have varying effects on plants, but their impact on the sexual reproduction process is largely unknown. In this study, the effects of few-layer graphene (FLG) and a similarly layered phyllosilicate, muscovite mica (MICA), were tested in vivo on the reproductive structures, i.e., pollen and stigma, of Cucurbita pepo L. ssp. pepo 'greyzini' (summer squash, zucchini). Pollen was exposed to FLG or MICA, after careful physical-chemical characterization, at concentrations of 0.5 and 2 mg of nanomaterial (NM) per g of pollen for up to six hours. Following this, pollen viability was tested. Stigmas were exposed to FLG or MICA for three hours and then analyzed by environmental scanning electron microscopy to verify possible alterations to their surface. Stigmas were then hand-pollinated to verify the effects of the two NMs on pollen adhesion and in vivo pollen germination. FLG and MICA altered neither pollen viability nor the stigmatic surface. However, both NMs equivalently decreased pollen adhesion and in vivo germination compared with untreated stigmas. These effects deserve further attention as they could impact on production of fruits and seeds. Importantly, it was shown that FLG is as safe as a naturally occurring nanomaterial.

Amino-functionalized alginate/graphene double-network hydrogel beads for emerging contaminant removal from aqueous solution

Inorganic-organic composite hydrogels have attracted much attention in recent years. In this study, an amino-functionalized graphene/alginate double-network hydrogel (NH₂-DN) with excellent mechanical and adsorption properties was successfully prepared. Triethylenetetramine (TETA) was used as a crosslinker which promotes random few-layer graphene sheets stacking and resulted in a reduced graphene oxide (rGO) network, containing mesopore and macropore structures on the hydrogel surface. Compared to single network hydrogel, enhanced thermal stability and mechanical properties were achieved in NH₂-DN. The elasticity modulus was improved by approximately 3 times due to the formation of the double-network. More importantly, NH₂-DN exhibited excellent adsorption properties for typical emerging contaminants (Cu²⁺ and ciprofloxacin (CIP)). Compared with that of an ordinary graphene/alginate single-network hydrogel (SN), the adsorption capacity of the NH₂-DN for Cu²⁺ and CIP reached 153.91 mg g^-1 and 301.36 mg g^-1, respectively, which was increased by 130% and 182%, respectively. Adsorption isotherm and kinetic analyses reveal that the adsorption process of CIP onto the NH₂-DN was dominated by chemical affinity. Adsorption properties were comprehensively examined, including the effects of the solid-liquid ratios, pH, and ionic strength. NH₂-DN retained 94% of its adsorption capacity when the ionic strength was 0.5 mol L^-1 and maintained at least 87% of its adsorption capacity in weak acidic and alkaline solutions. This novel amino-functionalized organic-inorganic hydrogel has great potential in environmental applications owing to its outstanding physicochemical, mechanical, and adsorption properties for emerging contaminants in wastewater.

Fabrication of graphene oxide coated quartz filter paper for enhanced adsorption of particulate matter

Airborne particulate matter has become an emerging issue globally due to environmental degradation and the health risk it causes. Volatilization of weakly adsorbed particles onto quartz filter paper (QFP) limits its performance. The adsorption of particulate matter (PM₁₀) onto QFP coated with different concentrations of graphene oxide (GO) was investigated to enhance the adsorption potential. Hummer's method was adopted to synthesize GO. QFPs were coated with different concentrations of GO using a spin coating technique to optimize the result. The morphology and microstructure of GO-QFP were characterized by various experimental techniques, like XRD, FTIR, EDX, and SEM. GO showed considerable affinity to aerosol particles for GO-QFP weighing 5 mg/ml, whereas adsorption of the coated samples before and after was significantly reduced. The high affinity to aerosol particles was due to dominated π-π interactions and the grooved regions formed on the GO layer. It was considered that the high surface to volume ratio of GO-QFP improves the adsorptive property of the QF and consequently enhances the performance of the filter paper.

A review on exfoliation, characterization, environmental and energy applications of graphene and graphene-based composites

Because of an atom-thick two-dimensional structure with sp² hybridization, large specific area, high thermal conductivity, superior electron mobility, and chemical stability, graphene (GN) has developed substantial interest among researchers, exponentially accelerating GN based research. GN and its derivatives are the potentially attractive materials to develop composites for energy and environmental applications. This review covered a general overview on physical and chemical properties of GN and based composite materials, briefly summarizing exfoliation methodologies and characterization techniques in the first section. The environmental applications of GN and GN composites in detection of gases, bacteria as well as in the removal of organic and inorganic pollutants were comprehensively addressed in the second section. Third section focused on recent progress associated with the applications of GN and its composites in solar energy conversion, electrochemical energy devices, storage and production of hydrogen. Finally, conclusive remarks emphasizing unresolved problems and major future challenges were covered in the last section. In addition, the prospects and further development of GN and GN composites in energy, environment and bioscience were discussed.

Adsorptive removal and photocatalytic degradation of organic pollutants using metal oxides and their composites: A comprehensive review

Metal oxide nanomaterials and their composites are comprehensively reviewed for water remediation. The controlled morphological and textural features, variable surface chemistry, high surface area, specific crystalline nature, and abundant availability make the nanostructured metal oxides and their composites highly selective materials for efficient removal of organic pollutants based on adsorption and photocatalytic degradation. A wide range of metal oxides like iron oxides, magnesium oxide, titanium oxides, zinc oxides, tungsten oxides, copper oxides, metal oxides composites, and graphene-metal oxides composites having variable structural, crystalline and morphological features are reviewed emphasizing the recent development, challenges, and opportunities for adsorptive removal and photocatalytic degradation of organic pollutants viz. dyes, pesticides, phenolic compounds, and so on. It also covers the deep discussion on the photocatalytic mechanism of metal oxides and their composites along with the properties relevant to photocatalysis. High photodegradation efficiency, economically-viable approaches for the preparation of photocatalytic materials, and controlled band-gap engineering make metal oxides highly efficient photocatalysts for degradation of organic pollutants. The review would be an excellent resource for researchers who are currently focusing on metal oxides-based materials for water remediation as well as for those who are interested in adsorptive and photocatalytic applications of metal oxides and their composites.

Capturing hemoglobin on graphene sheet from sub-microliter whole blood for quantitative characterization by internal extractive electrospray ionization mass spectrometry

A disposable blood sampler, which is consisted of a sub-microliter whole blood collector and a graphene filter, loading graphene sheet to selectively capture hemoglobin from sub-microliter whole blood, was developed for both qualitative and quantitative characterization hemoglobin by internal extractive electrospray ionization mass spectrometry (iEESI-MS). The blood collector was elegantly fabricated in syringe-like fashion for precisely sampling tiny amounts (1.0 μL - 2%) of whole blood, which was immediately diluted by water inside the syringe and was then pressed through the graphene filter placed between the waste outlet and the syringe reservoir to capture the hemoglobin in the blood sample. Then the graphene with hemoglobin was directly eluted by a charged (+2.5 kV) solution (mathanol/water/formic acid, 48/48/4, v/v/v) to produce the hemoglobin ions for mass spectrometric analysis. Low detection-of-limit (19.3 mg L^-1 (89.5 picomol)), acceptable linear response range (300-1500 mg L^-1, R² = 0.998), relative standard deviation (0.5-6.5%, n = 3), low sample consumption (≤1.0 μL) and a relatively high speed (≤4 min per sample, including the sample loading) were achieved, demonstrating that the graphene based iEESI-MS was an alternative choice for direct detection of hemoglobin in whole blood with minimal sample consumption.

Graphene oxide composites for magnetic solid-phase extraction of twelve quinolones in water samples followed by MALDI-TOF MS

Antibiotic compounds in natural waters are normally present at low concentrations. In this paper, an easy and highly sensitive screening method using graphene oxide-functionalized magnetic composites (GO@NH₂@Fe₃O₄) combined with matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry (MALDI-TOF MS) was established for twelve quinolone antibiotics. GO@NH₂@Fe₃O₄ composites were utilized as adsorbents for magnetic solid-phase extraction. This method combines the advantages of magnetic solid-phase extraction and MALDI-TOF MS, which allows for fast detection of quinolones at low concentrations. To improve absorption efficiency, the following parameters were individually optimized: sample acidity, extraction time, amount of adsorbent used, eluent used, and desorption time. Under the optimum conditions, the established method gave a low detection limit of 0.010 mg/L and allowed the high-throughput screening of twelve quinolone antibiotics (enoxacin, norfloxacin, ciprofloxacin, pefloxacin, fleroxacin, gatifloxacin, enrofloxacin, levofloxacin, sparfloxacin, danofloxacin, difloxacin, and lomefloxacin). The proposed method, having an easily prepared sorbent with a high affinity for quinolones and a convenient, high-throughput detection step, has been shown to have merit for the detection of antibiotics in water samples. Graphical abstract Schematic illustration of the (A) preparation of GO@NH₂@Fe₃O₄ and (B) operating procedure for the MSPE and MALDI-TOF MS detection of QNs.

Graphene oxide as a tool for antibiotic-resistant gene removal: a review

Environmental pollutants, including antibiotics (ATBs), have become an increasingly common health hazard in the last several decades. Overdose and abuse of ATBs led to the emergence of antibiotic-resistant genes (ARGs), which represent a serious health threat. Moreover, water bodies and reservoirs are places where a wide range of bacterial species with ARGs originate, owing to the strong selective pressure from presence of ATB residues. In this regard, graphene oxide (GO) has been utilised in several fields including remediation of the environment. In this review, we present a brief overview of resistant genes of frequently used ATBs, their occurrence in the environment and their behaviour. Further, we discussed the factors influencing the binding of nucleic acids and the response of ARGs to GO, including the presence of salts in the water environment or water pH, because of intrinsic properties of GO of not only binding to nucleic acids but also catalysing their decomposition. This would be helpful in designing new types of water treatment facilities.

Tandem catalysis driven by enzymes directed hybrid nanoflowers for on-site ultrasensitive detection of organophosphorus pesticide

Accurate analysis of organophosphate pesticides (OPs) with portable devices remain an elusive goal that have received widespread investigative attention in the areas of environmental contamination and disease prevention. Herein, using all-in-one enzyme-inorganic hybrid nanoflowers (ACC-HNFs) to fabricate high-performance artificial enzyme cascade system, we established a sensitive and affordable lab-on-paper biosensor. This biosensor incorporated disposable screen-printed carbon electrode (SPCE) and colorimetric test strips, which enabled the dual-modal readout (electrochemical and colorimetric signal) for on-site monitoring of OPs, achieving an "on-demand" tuning of the detection performance. Using paraoxon as a model analyte, the ACC-HNFs-based lab-on-paper platform could reach a limit of detection down to the femtogram/mL level (6 fg mL^-1). Meticulous design of ACC-HNFs provided a versatile approach for constructing artificial enzyme as a recognizer and amplifier to fill the gap in constructing robust artificial enzyme systems which can be used for on-site contamination monitoring and biological diagnosis.

Graphene based adsorbents for remediation of noxious pollutants from wastewater

The contamination of water resources with noxious pollutants is a serious issue. Many aquatic systems are contaminated with different toxic inorganic and organic species; coming to wastewater from various anthropogenic sources such as industries, agriculture, mining, and domestic households. Keeping in view of this, wastewater treatment appears to the main environmental challenge. Adsorption is one of the most efficient techniques for removing all most all types of pollutants i.e. inorganics and organics. Nowadays, graphene and its composite materials are gaining importance as nano adsorbents. Graphene; a two-dimensional nanomaterial having single-atom graphite layer; has attracted a great interest in many application areas (including wastewater treatment) due to its unique physico-chemical properties. The present paper is focused on the remediation of noxious wastes from wastewater using graphene based materials as adsorbents, and it contains all the details on materials - i.e., from their synthesis to application in the field of wastewater treatment (removal of hazardous contaminants of different chemical nature - heavy and rare-earth metal ions, and organic compounds - from wastewater effluents. The efficiency of the adsorption and desorption of these substances is considered. Certainly, this article will be useful for nano environmentalist to design future experiments for water treatment.

Equilibrium, kinetic and thermodynamic study of pesticides removal from water using novel glucamine-calix[4]arene functionalized magnetic graphene oxide

A novel nanocomposite of MGO-NGC, composed of magnetic Fe3O4 nanoparticles (M), graphene oxide (GO), and N-methyl-d-glucamine functionalized calix[4]arene (NGC), was synthesized and applied as an effective adsorbent for the removal of two selected pesticides, namely hexaconazole and chlorpyrifos from water samples. The adsorbent was characterized by FTIR, SEM, EDX, TEM, and XRD. The main parameters affecting the adsorption process such as adsorbent dosage, pH of sample solution, salt effect, pesticide concentration, and adsorption time were investigated. The data from kinetic studies fitted well to the pseudo-second order kinetic model with R2 > 0.99. Among the isotherm models of Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich, the Langmuir isotherm fitted well to the adsorption process and demonstrated the monolayer adsorption pattern of the pesticides. Moreover, high adsorption capacities of 78.74 and 93.46 mg g-1 were obtained for chlorpyrifos and hexaconazole, respectively. Thermodynamic and free energy data indicated the physisorption mechanism for the adsorption process. The new adsorbent can be employed as an efficient, environment friendly, and highly reusable alternative for the removal of chlorinated pesticides from aqueous media.

Advances in the applications of graphene adsorbents: from water treatment to soil remediation

Graphene, a novel carbon allotrope, is single-layered graphite with honeycomb lattice. Its unique structure endows graphene many outstanding physical/chemical properties and a large surface area, which are beneficial to its applications in many areas. The potential applications of graphene in pollution remediation are adsorption, membrane separation, catalysis, environmental analysis, and so on. The adsorption efficiency of graphene adsorbents largely depends on its surface area, porous structure, oxygen-containing groups and other functional groups, adsorption conditions, and also the properties of adsorbates. With appropriate modifications, graphene materials are mostly efficient adsorbents for organic pollutants (e.g. dyes, pesticides, and oils) and inorganic pollutants (e.g. metal ions, nonmetal ions, and gas). Since our first report of graphene adsorbents in 2010, plenty of studies have been dedicated to developing various graphene adsorbents and to evaluating their performance in treating contaminated water. Recently, there is a growing trend in graphene adsorbents that could be applied in soil remediation, where the situation is much more complicated than in aqueous systems. Herein, we review the design of graphene adsorbents for water treatment and analyze their potential in soil remediation. Several suggestions to accelerate the research on graphene-based soil remediation technology are proposed.

Nano-based smart pesticide formulations: Emerging opportunities for agriculture

The incorporation of nanotechnology as a means for nanopesticides is in the early stage of development. The main idea behind this incorporation is to lower the indiscriminate use of conventional pesticides to be in line with safe environmental applications. Nanoencapsulated pesticides can provide controlled release kinetics, while efficiently enhancing permeability, stability, and solubility. Nanoencapsulation can enhance the pest-control efficiency over extended durations by preventing the premature degradation of active ingredients (AIs) under harsh environmental conditions. This review is thus organized to critically assess the significant role of nanotechnology for encapsulation of AIs for pesticides. The smart delivery of pesticides is essential to reduce the dosage of AIs with enhanced efficacy and to overcome pesticide loss (e.g., due to leaching and evaporation). The future trends of pesticide nanoformulations including nanomaterials as AIs and nanoemulsions of biopesticides are also explored. This review should thus offer a valuable guide for establishing regulatory frameworks related to field applications of these nano-based pesticides in the near future.

In-situ examination of graphene and graphene oxide impact on the depuration of phenanthrene and fluoranthene adsorbed onto spinach (Spinacia oleracea L.) leaf surfaces

To further assess the human being's exposure to polycyclic aromatic hydrocarbons (PAHs) through the dietary pathway, understanding the partitioning of these chemicals co-existed with nanomaterials in edible vegetable systems deserves specific consideration. In this study, the fiber-optic fluorimetry was applied to in situ examine the effects of graphene (GNS) and graphene oxide (GO) nanosheets on the quantification and depuration of three-ringed phenanthrene (Phe) and four-ringed fluoranthene (Fla) adsorbed individually onto the living spinach (Spinacia oleracea L.) surfaces. When the GNS and GO dosages separately increased to the maximum values: a respective red-shift of 4-5 nm and blue-shift of 2-3 nm occurred for the optimal detection emission wavelengths (λ_em) of the two PAHs, indicating that individual GNS and GO resulted in different changes to the epicuticular wax (ECW) polarity; GNS-inducing fluorescence quenching for the PAHs was about two times greater than GO, owing to the stronger π-π interactions between PAH molecules and GNS relative to GO; the volatilization coefficients (k_C1) were reduced by 31.1% versus 26.7% for Phe, and 51.6% versus 34.4% for Fla, mainly via providing an additional adsorbent and promoting the accessibility of the leaf cuticle; respective photolysis coefficients (k_P2) of Phe and Fla decreased by 42.9% and 50.0% with GNS, primarily owing to the enhancement of the ECW light-adsorption capacity, but increased by 33.3% and 40.0% with GO due to its photocatalytic activities; overall, total depuration coefficients (k_T1, k_T2) of the two PAHs decreased by 11.1-55.6%. These findings demonstrate that GNS and GO significantly alter the depuration behavior of PAHs in vegetable systems, potentially posing a threat to the safety of edible vegetables.

Polycyclic Aromatic Hydrocarbons Adsorption onto Graphene: A DFT and AIMD Study

Density functional theory (DFT) calculations and ab-initio molecular dynamics (AIMD) simulations were performed to understand graphene and its interaction with polycyclic aromatic hydrocarbons (PAHs) molecules. The adsorption energy was predicted to increase with the number of aromatic rings in the adsorbates, and linearly correlate with the hydrophobicity of PAHs. Additionally, the analysis of the electronic properties showed that PAHs behave as mild n-dopants and introduce electrons into graphene; but do not remarkably modify the band gap of graphene, indicating that the interaction between PAHs and graphene is physisorption. We have also discovered highly sensitive strain dependence on the adsorption strength of PAHs onto graphene surface. The AIMD simulation indicated that a sensitive and fast adsorption process of PAHs can be achieved by choosing graphene as the adsorbent. These findings are anticipated to shed light on the future development of graphene-based materials with potential applications in the capture and removal of persistent aromatic pollutants.

Adhesive and Stimulus-Responsive Polydopamine-Coated Graphene Oxide System for Pesticide-Loss Control

Pesticide carrier systems are highly desirable in achieving the effective utilization of pesticides and reduction of their loss. In order to increase utilization and enhance pesticide adhesion to harmful targets, adhesive and stimulus-responsive nanocomposites were prepared using graphene oxide (GO) and polydopamine (PDA). The results demonstrated that graphene oxide with a layer of PDA had a high hymexazol-loading capacity. The release curve of hymexazol from the nanocomposite showed that the release was NIR-laser-dependent and pH-dependent. The adhesion-performance investigation demonstrated that Hy-GO@PDA exhibited greater hymexazol persistence than a hymexazol solution after a simulated-rainwash experiment, and it also left more hymexazol residue than a hymexazol solution with a surfactant under high concentrations. Finally, the bioactivity of the prepared hymexazol-loaded nanocomposite was measured against Fusarium oxysporum f. sp. cucumebrium Owen, and it showed an inhibition activity similar to that of the hymexazol solution. All of these revealed that GO with a PDA layer could serve as pesticide carrier to solve low-utilization and wash-off problems, especially for water-soluble pesticides.

Water treatment by new-generation graphene materials: hope for bright future

Water is the most important and essential component of earth's ecosystem playing a vital role in the proper functioning of flora and fauna. But, our water resources are contaminating continuously. The whole world may be in great water scarcity after few decades. Graphene, a single-atom thick carbon nanosheet, and graphene nanomaterials have bright future in water treatment technologies due to their extraordinary properties. Only few papers describe the use of these materials in water treatment by adsorption, filtration, and photodegradation methods. This article presents a critical evaluation of the contribution of graphene nanomaterials in water treatment. Attempts have been made to discuss the future perspectives of these materials in water treatment. Besides, the efforts are made to discuss the nanotoxicity and hazards of graphene-based materials. The suggestions are given to explore the full potential of these materials along with precautions of nanotoxicity and its hazards. It was concluded that the future of graphene-based materials is quite bright.

Toluene and acetaldehyde removal from air on to graphene-based adsorbents with microsized pores

Volatile organic compound (VOC) gases can cause harm to the human body with exposure over the long term even at very low concentrations (ppmv levels); thus, effective absorbents for VOC gas removal are an important issue. In this study, accordingly, graphene-based adsorbents with microsized pores were used as adsorbents to remove toluene and acetaldehyde gases at low concentrations (30ppm). Sufficient amounts of the adsorbents were prepared for use on filters and were loaded uniformly at 0.1-0.5g on a 50×50mm² area, to evaluate their adsorption features with low gas concentrations. The morphology and chemical composition of the adsorbents were characterized using scanning electron microscopy, N₂ adsorption-desorption isotherms, X-ray photoelectron spectroscopy, and Raman spectroscopy. Microwave irradiation and heat treatment near 800°C under KOH activation resulted in enlargement of the pristine graphene surface and its specific surface area; maximum volume capacities of 3510m³/g and 630m³/g were observed for toluene and acetaldehyde gas. The high removal efficiency for toluene (98%) versus acetaldehyde (30%) gas was attributed to π-π interactions between the pristine graphene surface and toluene molecules.

Graphene, electrospun membranes and granular activated carbon for eliminating heavy metals, pesticides and bacteria in water and wastewater treatment processes

The availability of safe water has a significant impact on all parts of society, its growth and sustainability, both politically and socioeconomically.

Hierarchical Porous Magnesium Oxide (Hr-MgO) Microspheres for Adsorption of an Organophosphate Pesticide: Kinetics, Isotherm, Thermodynamics, and DFT Studies

In this study, hierarchical porous magnesium oxide (Hr-MgO) microspheres have been fabricated from a hydromagnesite precursor via a facile precipitation method followed by calcination. The Hr-MgO microspheres consist of several nanosheet building blocks that generate a flowerlike architecture. Chlorpyrifos (CPF), a persistent organic pollutant, has been chosen as a model organophosphate pesticide to determine the adsorptive capacities of the fabricated Hr-MgO. The equilibrium adsorption data fits well with the Langmuir isotherm model, showing a maximum adsorption capacity of 3974 mg g^-1, which is the highest value to date. Both kinetic as well as thermodynamic parameters reveal the spontaneous, exothermic, and pseudo-second-order nature of the adsorption process due to chemisorption between the pesticide and the adsorbent. Density functional theory studies suggest the importance of hydroxylation on the MgO surface for the successful destructive adsorption, which takes place via the cleavage of S═P and Cl-C bonds resulting in the fragmentation of CPF, which is in good agreement with Fourier transform infrared and mass spectrometric studies. The present study shows the potential use of hierarchically structured porous MgO microspheres as an efficient adsorbent for the removal of CPF pollutant.