A General Strategy Assisted with Dual Reductants and Dual Protecting Agents for Preparing Pt-Based Alloys with High-Index Facets and Excellent Electrocatalytic Performance

Catalytic depolymerization of Camellia oleifera shell lignin to phenolic monomers: Insights into the effects of solvent, catalyst and atmosphere

Camellia oleifera shell (COS) is a renewable biomass resource abundant in lignin with significant potential for producing phenolic monomers. However, the dearth of research has led to considerable resource wastage and environmental pollution. Herein, reductive catalytic fractionation (RCF) of COS was performed using noble metal catalysts in different solvents. An 11.1 wt% yield of phenolic monomers was achieved with 91% selectivity toward propylene-substituted monomers in H2O/EtOH (3:7, v/v) cosolvent under N2 atmosphere. Notably, the highest phenolic monomer yield of 17.0 wt% was obtained with impressive selectivity (86.9%) toward propanol-substituted monomers in the presence of H2. The GPC analysis and 2D HSQC NMR spectra indicated the effective depolymerization of lignin oligomers with catalysts. Phenolic monomers with ethyl, propyl, or propanol side chain could be produced from lignin-derived oligomers through hydrogenolysis, hydrogenation, and decarboxylation reactions. Overall, this study has paved the way for the valorization of COS lignin through the RCF strategy.

In Situ Synthesis of Gold Nanoparticles from Chitin Nanogels and Their Drug Release Response to Stimulation

In this study, gold nanoparticles (AuNPs) were synthesized in situ using chitin nanogels (CNGs) as templates to prepare composites (CNGs@AuNPs) with good photothermal properties, wherein their drug release properties in response to stimulation by near-infrared (NIR) light were investigated. AuNPs with particle sizes ranging from 2.5 nm to 90 nm were prepared by varying the reaction temperature and chloroauric acid concentration. The photothermal effect of different materials was probed by near-infrared light. Under 1 mg/mL of chloroauric acid at 120 °C, the prepared CNGs@AuNPs could increase the temperature by 32 °C within 10 min at a power of 2 W/cm2. The Adriamycin hydrochloride (DOX) was loaded into the CNGs@AuNPs to investigate their release behaviors under different pH values, temperatures, and near-infrared light stimulations. The results showed that CNGs@AuNPs were pH- and temperature-responsive, suggesting that low pH and high temperature could promote drug release. In addition, NIR light stimulation accelerated the drug release. Cellular experiments confirmed the synergistic effect of DOX-loaded CNGs@AuNPs on chemotherapy and photothermal therapy under NIR radiation.

Noble Metal-Based Multimetallic Nanoparticles for Electrocatalytic Applications

Noble metal-based multimetallic nanoparticles (NMMNs) have attracted great attention for their multifunctional and synergistic effects, which offer numerous catalytic applications. Combined experimental and theoretical studies have enabled formulation of various design principles for tuning the electrocatalytic performance through controlling size, composition, morphology, and crystal structure of the nanoparticles. Despite significant advancements in the field, the chemical synthesis of NMMNs with ideal characteristics for catalysis, including high activity, stability, product-selectivity, and scalability is still challenging. This review provides an overview on structure-based classification and the general synthesis of NMMN electrocatalysts. Furthermore, postsynthetic treatments, such as the removal of surfactants to optimize the activity, and utilization of NMMNs onto suitable support for practical electrocatalytic applications are highlighted. In the end, future direction and challenges associated with the electrocatalysis of NMMNs are covered.

Rational Design of Single-Atom Site Electrocatalysts: From Theoretical Understandings to Practical Applications

Atomically dispersed metal-based electrocatalysts have attracted increasing attention due to their nearly 100% atomic utilization and excellent catalytic performance. However, current fundamental comprehension and summaries to reveal the underlying relationship between single-atom site electrocatalysts (SACs) and corresponding catalytic application are rarely reported. Herein, the fundamental understandings and intrinsic mechanisms underlying SACs and corresponding electrocatalytic applications are systemically summarized. Different preparation strategies are presented to reveal the synthetic strategies with engineering the well-defined SACs on the basis of theoretical principle (size effect, metal-support interactions, electronic structure effect, and coordination environment effect). Then, an overview of the electrocatalytic applications is presented, including oxygen reduction reaction, hydrogen evolution reaction, oxygen evolution reaction, oxidation of small organic molecules, carbon dioxide reduction reaction, and nitrogen reduction reaction. The underlying structure-performance relationship between SACs and electrocatalytic reactions is also discussed in depth to expound the enhancement mechanisms. Finally, a summary is provided and a perspective supplied to demonstrate the current challenges and opportunities for rational designing, synthesizing, and modulating the advanced SACs toward electrocatalytic reactions.

The use of amino-based functional molecules for the controllable synthesis of noble-metal nanocrystals: a minireview

Controlling the morphologies and structures of noble-metal nanocrystals has always been a frontier field in electrocatalysis. Functional molecules such as capping agents, surfactants and additives are indispensable in shape-control synthesis. Amino-based functional molecules have strong coordination abilities with metal ions, and they are widely used in the morphology control of nanocrystals. In this minireview, we pay close attention to recent advances in the use of amino-based functional molecules for the controllable synthesis of noble-metal nanocrystals. The effects of various amino-based molecules on differently shaped noble-metal nanocrystals, including zero-, one-, two-, and three-dimensional nanocrystals, are reviewed and summarized. The roles and mechanisms of amino-based small molecules and long-chain ammonium salts relating to the morphology-control synthesis of noble-metal nanocrystals are highlighted. Relationships between shape and electrocatalytic properties are also described. Finally, some key prospects and challenges relating to the controllable synthesis of noble-metal nanocrystals and their electrocatalytic applications are proposed.

Spiny Pd/PtFe core/shell nanotubes with rich high-index facets for efficient electrocatalysis

The performance of fuel-cell related electrocatalysis is highly dependent on the morphology, size and composition of a given catalyst. In terms of rational design of Pt-based catalyst, one-dimensional (1D) ultrafine Pt alloy nanowires (NWs) are considered as a commendable model for enhanced catalysis on account of their favorable mass/charge transfer and structural durability. However, in order to achieve the noble metal catalysts in higher efficiency and lower cost, building high-index facets and shaping hollow interiors should be integrated into 1D Pt alloy NWs, which has rarely been done so far. Here, we report the first synthesis of a class of spiny Pd/PtFe core/shell nanotubes (SPCNTs) constructed by cultivating PtFe alloy branches with rich high-index facets along the 1D removable Pd supports, which is driven by the galvanic dissolution of Pd substrates concomitant with Stranski-Krastanov (S-K) growth of Pt and Fe, for achieving highly efficient fuel-cells-related electrocatalysis. This new catalyst can even deliver electrochemical active surface area (ECSA) of 62.7 m² g_Pt^-1, comparable to that of commercial carbon-supported Pt nanoparticles. With respect to oxygen reduction catalysis, the SPCNTs showcase the remarkable mass and specific activity of 2.71 A mg^-1 and 4.32 mA cm^-2, 15.9 and 16.0 times higher than those of commercial Pt/C, respectively. Also, the catalysts exhibit extraordinary resistance to the activity decay and structural degradation during 50,000 potential cycles. Moreover, the SPCNTs serve as a category of efficient and stable catalysts towards anodic alcohol oxidation.

One-pot synthesis of mesoporous palladium/C nanodendrites as high-performance oxygen reduction eletrocatalysts through a facile dual surface protecting agent-assisted strategy

Palladium (Pd) is regarded as a potential non-platinum electrocatalyst to drive oxygen reduction in fuel cells. The development of Pd-based electrocatalysts with high performances through structural engineering is still highly desirable. Herein, a facile one-pot synthesis strategy with the assistance of dual surface protecting agents was developed to fabricate carbon-supported Pd (Pd/C) nanodendrites with high mesoporosity. The mesoporous spherical Pd/C nanodendrites are built with connected nanoparticles with a small size of several nanometers and coated by simultaneously formed carbon layers. The used dual protecting agents, glycine and oleylamine, exhibit synergistic effects to engineer Pd growth to form the unique mesoporous dendritic structure. Benefiting from the mesoporous feature, small size, defect-rich surface and carbon coating, the obtained mesoporous Pd/C nanodendrites exhibit great electrocatalytic performance toward the oxygen reduction reaction (ORR).

Implanting Atomic Dispersed Ru in PtNi Colloidal Nanocrystal Clusters for Efficient Catalytic Performance in Electro-oxidation of Liquid Fuels

Although PtRu alloy nanocatalysts have been certified to possess excellent electrocatalytic performance and CO-poisoning tolerance toward formic acid and methanol electro-oxidation, the unaffordable usages of ruthenium (Ru) and platinum (Pt) have greatly limited their widespread adoption. Here, a facile one-pot method is reported for implanting atomic dispersed Ru in PtNi colloidal nanocrystal clusters with different Ru/Pt/Ni molar ratios, greatly reducing the dosages of Pt and Ru, and further improving the catalytic performances for the electro-oxidation of formic acid and methanol. Through simple control of the amount of Ni(acac)₂ precursor, trimetallic Ru_0.3 Pt_70.5 Ni_29.2 , Ru_0.6 Pt_55.9 Ni_43.5 , Ru_0.2 Pt_77.3 Ni_22.5 , and Ru_0.9 Pt_27.3 Ni_71.8 colloidal nanocrystal clusters (CNCs) are obtained. In particular, the Ru_0.3 Pt_70.5 Ni_29.2 CNCs exhibit excellent specific activities for formic acid and methanol electro-oxidation, that is, 14.2 and 15.3 times higher, respectively, than those of the Pt/C catalyst. Moreover, the Ru_0.3 Pt_70.5 Ni_29.2 CNCs also possess better anti-CO-poisoning properties and diffusion ability than the other RuPtNi CNCs. The excellent formic acid and methanol electro-oxidation activities of RuPtNi CNCs are ascribed to the optimal ligand effects derived from the Pt, Ni, and atomic dispersed Ru atoms, which can improve the OH adsorption ability and further the anti-CO-poisoning capability. This research opens a new door for increasing the electro-oxidation properties of liquid fuels by using lower dosages of noble metals in Pt-based catalysts.

Surfactant-Free One-Pot Synthesis of Homogeneous Trimetallic PtNiCu Nanoparticles with Size Control by Using Glycine

Homogeneous platinum alloy nanoparticles (NPs) are of great interest to the electrocatalytic community for potential use in various fuel cell electrodes. Increasing the surface area available per unit mass by decreasing the size of NPs while maintaining or improving activity is one of the key tasks of fuel cell catalysis. Achieving both in a synthesis of multielement NPs is still a challenging workup. In this investigation, we report the use of glycine as a size control agent to make ultrasmall homogeneous trimetallic PtNiCu NPs within 2-5 nm range. The mechanistic roles of dimethyl formamide (DMF), formaldehyde, water, and glycine are explored to understand the formation of these small NPs. Interestingly, it was observed that these PtNiCu NPs exhibited substantially enhanced mass activities toward the electro-oxidation of ethanol in comparison to commercial Pt black.

Efficient polyalcohol oxidation electrocatalysts enabled by PtM (M = Fe, Co, and Ni) nanocubes surrounded by (200) crystal facets

Due to the high-density (200) crystal planes and abundant active sites, cubic platinum nanomaterials have become outstanding electrocatalysts in promoting fuel cell reactions. However, because of the fact that the facet-controlled synthesis is difficult, it is still a grand challenge to synthesize a sequence of Pt-based nanocubes via a universal method. Herein, we report a general and simple eco-friendly solvothermal method to prepare (200)-enclosed PtM nanocubes. Different from the other nanomaterials, nanocubes are conducive to mass transfer. Moreover, the synergistic and electronic effects between M and Pt are profitable to improve the utilization of precious metals. We used (200)-encapsulated nanocrystals to evaluate their electrocatalytic performance towards glycerol and ethylene glycol oxidation reactions in an alkaline medium. In particular, Pt4Co nanocubes showed superior mass activities in glycerol and ethylene glycol oxidation reactions, which are 6.2- and 5.0-fold higher than those obtained for commercial Pt/C catalysts, respectively. Meanwhile, Pt4M catalysts manifested excellent stability in the endurance test, which is attributed to the alloying effect promoting the electrooxidation of intermediates. Our study provides an ideal method for the construction of Pt-based bimetallic nanocubes, which can be used for anode reactions of polyol fuel cells and beyond.

Ternary PtFeCo alloys on graphene with high electrocatalytic activities for methanol oxidation

Ternary PtFeCo alloys as alternatives to conventional Pt electrocatalysts are highly important in the field of the methanol oxidation reaction. In this study, we demonstrate a one-pot two-step reduction method for the synthesis of graphene supported PtFeCo alloy nanocomposites as an integrated binder-free catalyst. The synergistic effect of alloying with Fe and Co as well as graphene decorating contributes to an increase in the utilization of the noble metal, namely, reducing the amount of Pt in the nanocomposites to 7%. After tailoring the elemental composition of the alloys, Pt₅₂Fe₂₉Co₁₉@G-7% exhibits a mass activity/specific activity of 1758.2 mA mg^-1_Pt/3.42 mA cm^-2 that is 3.13/3.45 times that of commercial Pt/C in an acidic medium. Impressively, it showed a superior mass current density of 9356.1 mA mg^-1_Pt at 60 °C which is close to the operating temperature of direct methanol fuel cells. Moreover, the as-obtained Pt₅₂Fe₂₉Co₁₉@G-7% also exhibited excellent CO tolerance and reliable stability compared to commercial Pt/C. The structural characterization further verifies that the surface strain and electronic effect play a critical role in determining the electrocatalytic properties of PtFeCo@G nanocomposites for the methanol oxidation reaction.

The in situ etching assisted synthesis of Pt-Fe-Mn ternary alloys with high-index facets as efficient catalysts for electro-oxidation reactions

Pt-Based alloys enclosed with high-index facets (HIFs) generally show much higher specific catalytic activities than their counterparts with low-index facets in electro-catalytic reactions. However, the exposure of a certain Pt surface would require a well-defined nanostructure, which usually can only be obtained at larger sizes. Therefore, a low dispersion of Pt atoms in Pt-based alloys with HIFs would affect the atomic utilization of Pt, resulting in most of these Pt-based alloys exhibiting lower mass activity than commercial Pt/C and Pt black catalysts for electro-catalytic reactions. Herein, we address a novel strategy to divide the surface areas of larger sized nanocrystals into small surface area nanocrystals by in situ etching Pt-Fe-Mn concave cubes (CNCs) while maintaining the morphology of the Pt-Fe-Mn alloys to improve the utilization of Pt atoms and thus increase the mass activity. Remarkably, the Pt-Fe-Mn unique concave cube (UCNC) nanocrystals (NCs) showed much higher specific and mass activities toward the methanol oxidation reaction (MOR) than the Pt-Fe-Mn CNCs, commercial Pt black and Pt/C. The kinetic analysis from Tafel plots indicated that UCNC Pt-Fe-Mn NCs had the lowest Tafel slope at whole potentials and the splitting of the first C-H bond of a CH3OH molecule with the first electron transfer was the rate-determining step at high potentials (above 0.45 V). In situ Fourier transform infrared reflection (FTIR) spectroscopic investigation at the molecular level indicated that methanol chemical absorption took place at a low potential of -0.2 V at the UCNC NC electrode. Meanwhile, much higher CO2 productivity was observed at the UCNC NC electrode, indicating the strong anti-poisoning ability of the UCNC Pt-Fe-Mn NCs during methanol electrooxidation. Furthermore, in the formic acid oxidation (FAOR) test, the activity and long-term durability of the Pt-Fe-Mn UCNC NCs were also found to be superior to those of the Pt-Fe-Mn CNCs, commercial Pt black and Pt/C. The enhanced catalytic performance in both the MOR and FAOR is most probably due to the unique HIF structure consisting of small sized particles, enhanced Pt utilization, the richness of crystalline defects and synergetic effects of Pt, Fe, and Mn metals. Our present work provides an insight into the rational design of Pt based alloys with HIFs to improve the catalytic performance of electro-catalytic reactions for fundamental study.

A novel strategy for the synthesis of hollow Pt–Cu tetradecahedrons as an efficient electrocatalyst toward methanol oxidation

Pt–Cu TNs can be simply achieved within a few minutes by an H⁺-assisted disproportionation reaction using Cu₂O tetradecahedrons as the template. Due to its unique structural advantages, these Pt–Cu TNs exhibit extraordinary electrocatalytic performance toward MOR.

Surface-modified Pt1Ni1–Ni(OH)2 nanoparticles with abundant Pt–Ni(OH)2 interfaces enhance electrocatalytic properties

Pt₁Ni₁–Ni(OH)₂ NPs with abundant Pt–Ni(OH)₂ interfaces exhibit a rather high activity and stability for the MOR in alkaline electrolytes.

Facile Synthesis of Porous Pd3 Pt Half-Shells with Rich "Active Sites" as Efficient Catalysts for Formic Acid Oxidation

Exploring highly efficient electrocatalysts is greatly important for the widespread uptake of the fuel cells. However, many newly generated nanocrystals with attractive nanostructures often have extremely limited surface area or large particle-size, which leads them to display limited electrocatalytic performance. Herein, a novel anode catalyst of hollow and porous Pd₃ Pt half-shells with rich "active sites" is synthesized by using urea as a guiding surfactant. It is identified that the formation of Pd₃ Pt half-shells involves the combination of bubble guiding, in situ deposition of particles and bubble burst. The obtained Pd₃ Pt half-shells demonstrate a rich edge area with abundant exposed active sites and surface defects, indicating great potential for the electrocatalysis. When used as an electrocatalyst, the Pd₃ Pt half-shells exhibit remarkably improved electrocatalytic performance for formic acid oxidation (FAO), where it promotes the dehydrogenation process of FAO by suppressing the formation of poisonous species CO_ads via the electronic effect and ensemble effect.

Highly-oriented one-dimensional MOF-semiconductor nanoarrays for efficient photodegradation of antibiotics

Highly-oriented one-dimensional MOF-semiconductor nanoarrays were developed for the efficient photodegradation of antibiotics.