Compositional Control as the Key for Achieving Highly Efficient OER Electrocatalysis with Cobalt Phosphates Decorated Nanocarbon Florets

Hollow-structured cobalt sulfide electrocatalyst for alkaline oxygen evolution reaction: Rational tuning of electronic structure using iron and fluorine dual-doping strategy

Utilizing renewable electricity for water electrolysis offers a promising way for generating high-purity hydrogen gases while mitigating the emission of environmental pollutants. To realize the water electrolysis, it is necessary to develop highly active and precious metal-free electrocatalyst for oxygen evolution reaction (OER) which incurs significant overpotential due to its complicated four-electron transfer mechanism. Hence, we propose a facile preparation method for hollow-structured Fe and F dual-doped CoS2 nanosphere (Fe-CoS2-F) as an efficient OER electrocatalyst. The uniform hollow and porous structure of Fe-CoS2-F enlarge the specific surface area and increase the number of exposed active sites. Furthermore, the Fe and F dual-dopants synergistically contributed to the adjustment of electronic structure, thereby promoting the adsorption/desorption of oxygen-containing reaction intermediates on active sites during the alkaline OER procedure. As a result, the prepared Fe-CoS2-F exhibits outstanding OER activity, characterized by a low overpotential of 298 mV to achieve a current density of 10 mA cm-2 and a Tafel slope as small as 46.0 mV dec-1. Based on computational theoretical calculations, the introduction of the dual-dopants into CoS2 structure reduce the excessively strong adsorption energy of reaction intermediate in the rate determining step, leading to effectively promoted electrocatalytic cycle for OER in alkaline environment. This study presents an effective strategy for preparing noble metal-free OER electrocatalysts with promising potential for large-scale industrial water electrolysis.

Mn-doped Sequentially Electrodeposited Co-based Oxygen Evolution Catalyst for Efficient Anion Exchange Membrane Water Electrolysis

Designing high-performance and durable oxygen evolution reaction (OER) catalysts is important for green hydrogen production through anion exchange membrane water electrolysis (AEMWE). Herein, a series of Mn-doped Co-based OER catalysts supported on FeOxHy (FCMx) are presented to enhance the OER activity. Mn doping effectively reduces the size of the Co oxide particles, thereby augmenting the active surface area. Moreover, Mn doping induces the creation of oxygen vacancies, leading to an efficient structural conversion during the OER, which is confirmed via in situ Raman spectroscopy. Under optimal conditions, the catalyst exhibits an overpotential of 234.4 mV at 10 mA cm-2 and a Tafel slope of 37.2 mV dec-1 under half-cell conditions. The AEMWE single-cell system demonstrates a current density of 1560 mA cm-2 at 1.8 V at 60 °C with a degradation rate of 0.4 mV h-1 for 500 h at 500 mA cm-2. Our development of a robust OER catalyst represents notable progress in the field of nonprecious-metal water electrolysis, marking a step toward cost-effective green hydrogen production.

Ultralow-Overpotential Acidic Oxygen Evolution Reaction Over Bismuth Telluride-Carbon Nanotube Heterostructure with Organic Framework

The state-of-the-art iridium and ruthenium oxides-based materials are best known for high efficiency and stability in acidic oxygen evolution reaction (OER). However, the development of economically feasible catalysts for water-splitting technologies is challenging by the requirements of low overpotential, high stability, and resistance of catalysts to dissolution during the acidic oxygen evolution reaction . Herein, an organometallic core-shell heterostructure composed of a carbon nanotube core (CNT) and bismuth telluride (Bi2Te3) shell (denoted as nC-Bi2Te3) is designed and use it as a catalyst for the acidic OER. The proposed catalyst achieves an ultralow overpotential of 160 mV at 10 mA cm-2 (geometrical), thereby outperforming most of the state-of-the-art precious-metal-based catalysts. The low Tafel slope of 30 mV dec-1 and charge transfer resistance (RCT) of 1.5 Ω demonstrate its excellent electrocatalytic activity. The morphological and chemical compositions of nC-Bi2Te3 enable the generation of ─OH functional group in the Bi─Te sections formed via a ligand support, which enhances the absorption capacity of H+ ions and increases the intrinsic catalytic activity. The presented insights regarding the material composition-structure relationship can help expand the application scope of high-performance catalysts.

NiCo-LDH Hollow Nanocage Oxygen Evolution Reaction Promotes Luminol Electrochemiluminescence

Conventional luminol co-reactant electrochemiluminescence (ECL) systems suffer from low stability and accuracy due to factors such as the ease of decomposition of hydrogen peroxide and inefficient generation of reactive oxygen species (ROS) from dissolved oxygen. Inspired by the luminol ECL mechanism mediated by oxygen evolution reaction (OER), the nickel-cobalt layered double hydroxide (NiCo-LDH) hollow nanocages with hollow structure and defect state are used as co-reaction promoters to enhance the ECL emission from the luminol-H2 O system. Thanks to the hollow structure and defect state, NiCo-LDH hollow nanocages show excellent OER catalytic activity, which can stabilize and efficiently produce ROS and enhance the ECL emission. Additionally, mechanistic exploration suggests that the ROS involved in the co-reaction of the luminol-H2 O system are derived from the OER reaction process, and there is a positive correlation between ECL intensity and the OER catalytic activity of the co-reaction promoter. The selection of catalysts with excellent OER catalytic activity is a key factor in improving ECL emission. Finally, a dual-mode immunosensor is constructed for the detection and analysis of alpha-fetoprotein (AFP) based on the promoting effect of NiCo-LDH hollow nanocages on the luminol-H2 O ECL system.

Laser-induced immobilization of an amorphous iron-phosphate/Fe3O4 composite on nickel foam for efficient water oxidation

A laser-induced immobilization strategy is applied to prepare an amorphous iron-phosphate/Fe3O4 (L-FePO) composite on a nickel foam (NF) support. By laser-irradiating an iron hydrogen phosphate (FeHP) precursor, a melting and oxidation process leads to the generation of L-FePO with hierarchical pores and an amorphous structure. L-FePO shows exceptional electrocatalytic performance for the OER in an alkaline electrolyte, demonstrating an overpotential of 256 mV at 100 mA cm-2, a Tafel slope of 71 mV dec-1, and good stability over 100 h. The active Fe3O4, partially dissolved phosphate, and newly formed FeOOH species provide abundant active sites, contributing to the excellent OER performance.

Exploiting the Synergism of a Carbon-Catalyst Interface to Achieve Magneto-Electrocatalytic Overall Water Splitting at 2.197 V

The desire to electrolyze water at low energy and high kinetics for achieving rapid H2 production forms the holy grail for the paradigm shift to a sustainable H2-driven economy. While alkaline electrolysis is preferred due to the use of earth-abundant catalysts, its sluggish kinetics and high overpotential are the persistent challenges. Addressing this, we demonstrate the coupling of an externally applied magnetic field (Hext) to a synergistically designed interface of nanostructured carbon floret with antiferromagnetic NiO nanoflakes that act in unison to achieve rapid hydrogen generation (6.3 N m3 h-1 W-1) that is comparable with existing technologies. Specifically, the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) overpotentials are simultaneously reduced by 10 and 7%, respectively, under the influence of a weak fridge magnet (Hext = 200 mT). Consequently, ∼11% improvement in the energy efficiency is observed with a 21% reduced cell voltage for overall water splitting. The stability of the system is demonstrated over a prolonged lifetime of ∼95 h. This performance enhancement with Hext for both HER and OER is explained in terms of improved kinetic facility for the reaction and lower resistance of charge transfer pathway. Moreover, the electrocatalyst is seen to retain the improved performance for prolonged usage (∼3 h) even after the removal of the Hext, and hence, it provides an energy-efficient hydrogen and oxygen generation pathway.

Tuning the Coordination Environment of Carbon-Based Single-Atom Catalysts via Doping with Multiple Heteroatoms and Their Applications in Electrocatalysis

Carbon-based single-atom catalysts (SACs) are considered to be a perfect platform for studying the structure-activity relationship of different reactions due to the adjustability of their coordination environment. Multi-heteroatom doping has been demonstrated as an effective strategy for tuning the coordination environment of carbon-based SACs and enhancing catalytic performance in electrochemical reactions. Herein, recently developed strategies for multi-heteroatom doping, focusing on the regulation of single-atom active sites by heteroatoms in different coordination shells, are summarized. In addition, the correlation between the coordination environment and the catalytic activity of carbon-based SACs are investigated through representative experiments and theoretical calculations for various electrochemical reactions. Finally, concerning certain shortcomings of the current strategies of doping multi-heteroatoms, some suggestions are put forward to promote the development of carbon-based SACs in the field of electrocatalysis.

PdO@CoSe2 composites: efficient electrocatalysts for water oxidation in alkaline media

In this study, we have prepared cobalt selenide (CoSe₂) due to its useful aspects from a catalysis point of view such as abundant active sites from Se edges, and significant stability in alkaline conditions. CoSe₂, however, has yet to prove its functionality, so we doped palladium oxide (PdO) onto CoSe₂ nanostructures using ultraviolet (UV) light, resulting in an efficient and stable water oxidation composite. The crystal arrays, morphology, and chemical composition of the surface were studied using a variety of characterization techniques, including X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FTIR) spectroscopy. It was also demonstrated that the composite systems were heterogeneous in their morphology, undergoing a shift in their diffraction patterns, suffering from a variety of metal oxidation states and surface defects. The water oxidation was verified by a low overpotential of 260 mV at a current density of 20 mA cm^-2 with a Tafel Slope value of 57 mV dec^-1. The presence of multi metal oxidation states, rich surface edges of Se and favorable charge transport played a leading role towards water oxidation with a low energy demand. Furthermore, 48 h of durability is associated with the composite system. With the use of PdO and CoSe₂, new, low efficiency, simple electrocatalysts for water catalysis have been developed, enabling the development of practical energy conversion and storage systems. This is an excellent alternative approach for fostering growth in the field.

Constructing electrospun spinel NiFe2O4 nanofibers decorated with palladium ions as nanosheets heterostructure: boosting electrocatalytic activity of HER in alkaline water electrolysis

The development of efficient electrocatalysts for the water splitting process and understanding their fundamental catalytic mechanisms are highly essential to achieving high performance in energy conversion technologies. Herein, we have synthesised spinel nickel ferrite nanofibers (NiFe₂O₄-NFs) via an electrospinning (ES) method followed by a carbonization process. The resultant fiber was subjected to electrocatalytic water splitting reactions in alkaline medium. The catalytic efficiency of the NiFe₂O₄-NFs in OER was highly satisfactory. But it is not high enough to catalyse the HER process. Hence, palladium ions were decorated as nanosheets on NiFe₂O₄-NFs as a heterostructure to improve the catalytic efficiency for HER. Density functional theory (DFT) confirms that the addition of palladium to NiFe₂O₄-NFs helps to reduce the effect of catalyst poisoning and improve the efficiency of the catalyst. In an alkaline hybrid electrolyser, the required cell voltage was observed as 1.51 V at a fixed current density of 10 mA cm^-2.

Defect engineering tuning electron structure of biphasic tungsten-based chalcogenide heterostructure improves its catalytic activity for hydrogen evolution and triiodide reduction

The design and exploration of high-efficiency and low-cost electrode catalysts are of great significance to the development of novel energy conversion technologies. In this work, metal and nonmetal heteroatoms co-doped biphasic tungsten-based chalcogenide heterostructured catalyst (Co-WS₂/P-WO_2.9) with rich defects is successfully synthesized by a vulcanization technique. The electrocatalytic performance of WS₂/WO₃ in the hydrogen evolution reaction (HER) and triiodide reduction reaction is significantly enhanced by modifying and optimizing its electronic structure through a defect engineering strategy. As an electrocatalyst for HER, the optimized Co-WS₂/P-WO_2.9 exhibits a low overpotential at 10 mA cm^-2 of 146 and 120 mV with small Tafel slopes of 86 and 74 mV dec^-1 in alkaline and acidic electrolyte, respectively. In addition, a Co-WS₂/P-WO_2.9 assembled solar cell yields a short circuit current density of 15.85 mA cm^-2, an open-circuit voltage of 0.74 V, a fill factor of 0.66, and a competitive power conversion efficiency (7.83%), which is comparable or higher than conventional Pt-based solar cell (16.02 mA cm^-2, 0.70 V, 0.63, 7.14%). The formation of a heterostructure in Co-WS₂/P-WO_2.9 leads to the presence of a built-in electric field in the interfacial region between Co-WS₂ and P-WO_2.9, which leads to an increased open-circuit voltage from 0.70 V for Pt to 0.74 V for Co-WS₂/P-WO_2.9. This work can provide a technical support for developing high-performance heterostructured catalysts, which open up a way for improving catalytic performance of heterostructured catalysts in the field of electrocatalysis.

Alkali Metal Di-tert-butyl Phosphates: Single-Source Precursors for Homo- and Heterometallic Inorganic Phosphate Materials

The reaction of alkali metal acetates, M(OAc)·nH₂O (M = Li, Na, K), with thermally and hydrolytically unstable di-tert-butylphosphate ((^tBuO)₂PO₂H, dtbp-H) in a 1:1 molar ratio in MeOH at room temperature leads to clean formation of group 1 metal phosphates [Li(μ-dtbp)]_n (1), [Na(μ-dtbp)]_n (2), and [K₄(μ-dtbp)₄(μ-H₂O)₃]_n (3). All three compounds are essentially M/L 1:1 complexes. Owing to the presence of larger potassium ions, additional coordinated water molecules are found in 3, which has been further employed as a precursor for the synthesis of a mixed-metal phosphate polymer [CaK(μ-H₂O)₃(μ-dtbp)₃]_n (4) by reacting 3 with Ca(OAc)₂. Compounds 1-4 have been characterized by various analytical and spectroscopic techniques. Molecular structures of 1-4 have been established in the solid state by single-crystal X-ray diffraction studies, which reveal them to be one-dimensional polymers, where the adjacent metal centers are connected through -O-P-O- bridges formed by the dtbp ligand. These complexes are rare examples of analytically pure alkali metal alkyl phosphates bearing no additional N-donor ligands (other than dtbp ligands, only water molecules are coordinated to the metal centers). Therefore, these compounds can be employed as single-source precursors (SSPs) for nano-sized ceramic phosphates. The thermogravimetric analysis of 1-4 reveals the loss of thermally labile tert-butyl substituents of the organophosphate ligands to form organic-free phosphate materials in the temperature range 300-500 °C. Solvothermal decomposition of 1-3 in boiling toluene leads to the formation of corresponding dihydrogen phosphates M(H₂PO₄) (M = Li, Na, and K). The thermal decomposition of heterometallic 4 in the temperature range 400-800 °C leads to the formation of phase-pure mixed-metal calcium potassium metaphosphate CaK(PO₃)₃.

3D nanoporous NiCoP as a highly efficient electrocatalyst for the hydrogen evolution reaction in alkaline electrolyte

3D nanoporous NiCoP properly inherits the dealloyed double-continuous nanoporous structure, enables fast charge transfer, and fully reflects its inherent activity.

Critical Role of Phosphorus in Hollow Structures Cobalt-Based Phosphides as Bifunctional Catalysts for Water Splitting

Cobalt phosphides electrocatalysts have great potential for water splitting, but the unclear active sides hinder the further development of cobalt phosphides. Wherein, three different cobalt phosphides with the same hollow structure morphology (CoP-HS, CoP₂ -HS, CoP₃ -HS) based on the same sacrificial template of ZIF-67 are prepared. Surprisingly, these cobalt phosphides exhibit similar OER performances but quite different HER performances. The identical OER performance of these CoP_x -HS in alkaline solution is attributed to the similar surface reconstruction to CoOOH. CoP-HS exhibits the best catalytic activity for HER among these CoP_x -HS in both acidic and alkaline media, originating from the adjusted electronic density of phosphorus to affect absorption-desorption process on H. Moreover, the calculated ΔG_H* based on P-sites of CoP-HS follows a quite similar trend with the normalized overpotential and Tafel slope, indicating the important role of P-sites for the HER process. Moreover, CoP-HS displays good performance (cell voltage of 1.67 V at a current density of 50 mA cm^-2 ) and high stability in 1 M KOH. For the first time, this work detailly presents the critical role of phosphorus in cobalt-based phosphides for water splitting, which provides the guidance for future investigations on transition metal phosphides from material design to mechanism understanding.

Joule Heating-Driven Transformation of Hard-Carbons to Onion-like Carbon Monoliths for Efficient Capture of Volatile Organic Compounds

Soft graphitizable carbon-based multifunctional nanomaterials have found versatile applications ranging from energy storage to quantum computing. In contrast, their hard-carbon analogues have been poorly investigated from both fundamental and application-oriented perspectives. The predominant challenges have been (a) the lack of approaches to fabricate porous hard-carbons and (b) their thermally nongraphitizable nature, leading to inaccessibility for several potential applications. In this direction, we present design principles for fabrication of porous hard-carbon-based nanostructured carbon florets (NCFs) with a highly accessible surface area (∼936 m²/g), rivalling their soft-carbon counterparts. Subjecting such thermally stable hard-carbons to a synergistic combination of an electric field and Joule heating drives their transformation to free-standing macroscopic monoliths composed of onion-like carbons (OLCMs). This represents the first such structural transformation observed in sp²-based hard-carbon NCFs to sp²-networked OLCMs. Micro-Raman spectroscopy establishes the simultaneous increase in the intensity of D-, 2D-, and D + G-bands at 1341, 2712, and 2936 cm^-1 and is correlated to the reorganization in the disordered graphitic domains of NCFs to curved concentric nested spheres in OLCMs. This therefore completely precludes the formation of a nanodiamond core that has been consistently observed in all previously reported OLCs. The Joule heating-driven formation of OLCMs is accompanied by ∼5700% enhancement in electrical conductivity that is brought about by the fusion of outermost graphitic shells of OLCs to result in monolithic OLC structures (OLCMs). The porous and inter-networked OLCMs exhibit an excellent adsorption-based capture of volatile organic compounds such as toluene at high efficiencies (∼99%) over a concentration range (0.22-1.86 ppm) that is relevant for direct applications such as smoke filters in cigarettes.

Strategies for Developing Transition Metal Phosphides in Electrochemical Water Splitting

Electrochemical water splitting involving hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is a greatly promising technology to generate sustainable and renewable energy resources, which relies on the exploration regarding the design of electrocatalysts with high efficiency, high stability, and low cost. Transition metal phosphides (TMPs), as nonprecious metallic electrocatalysts, have been extensively investigated and proved to be high-efficient electrocatalysts in both HER and OER. In this minireview, a general overview of recent progress in developing high-performance TMP electrocatalysts for electrochemical water splitting has been presented. Design strategies including composition engineering by element doping, hybridization, and tuning the molar ratio, structure engineering by porous structures, nanoarray structures, and amorphous structures, and surface/interface engineering by tuning surface wetting states, facet control, and novel substrate are summarized. Key scientific problems and prospective research directions are also briefly discussed.

Rational Construction of a N, F Co-doped Mesoporous Cobalt Phosphate with Rich-Oxygen Vacancies for Oxygen Evolution Reaction and Supercapacitors

Transition-metal phosphates have been widely applied as promising candidates for electrochemical energy storage and conversion. In this study, we report a simple method to prepare a N, F co-doped mesoporous cobalt phosphate with rich-oxygen vacancies by in-situ pyrolysis of a Co-phosphate precursor with NH₄ ⁺ cations and F^- anions. Due to this heteroatom doping, it could achieve a current density of 10 mA/cm² at lower overpotential of 276 mV and smaller Tafel slope of 57.11 mV dec^-1 on glassy carbon. Moreover, it could keep 92 % of initial current density for 35 h, indicating it has an excellent stability and durability. Furthermore, the optimal material applied in supercapacitor displays specific capacitance of 206.3 F g^-1 at 1 A ⋅ g^-1 and maintains cycling stability with 80 % after 3000 cycles. The excellent electrochemical properties should be attributed to N, F co-doping into this Co-based phosphate, which effectively modulates its electronic structure. In addition, its amorphous structure provides more active sites; moreover, its mesoporous structure should be beneficial to mass transfer and electrolyte diffusion.

Selenic Acid Etching Assisted Vacancy Engineering for Designing Highly Active Electrocatalysts toward the Oxygen Evolution Reaction

Oxygen evolution electrocatalysts are central to overall water splitting, and they should meet the requirements of low cost, high activity, high conductivity, and stable performance. Herein, a general, selenic-acid-assisted etching strategy is designed from a metal-organic framework as a precursor to realize carbon-coated 3d metal selenides M_m Se_n (Co_0.85 Se_{1- x} , NiSe_{2- x} , FeSe_{2- x} ) with rich Se vacancies as high-performance precious metal-free oxygen evolution reaction (OER) electrocatalysts. Specifically, the as-prepared Co_0.85 Se_{1- x} @C nanocages deliver an overpotential of only 231 mV at a current density of 10 mA cm^-2 for the OER and the corresponding full water-splitting electrolyzer requires only a cell voltage of 1.49 V at 10 mA cm^-2 in alkaline media. Density functional theory calculation reveals the important role of abundant Se vacancies for improving the catalytic activity through improving the conductivity and reducing reaction barriers for the formation of intermediates. Although phase change after long-term operation is observed with the formation of metal hydroxides, catalytic activity is not obviously affected, which strengthens the important role of the carbon network in the operating stability. This study provides a new opportunity to realize high-performance OER electrocatalysts by a general strategy on selenic acid etching assisted vacancy engineering.

Electrochemical Activation of Atomic Layer-Deposited Cobalt Phosphate Electrocatalysts for Water Oxidation

The development of efficient and stable earth-abundant water oxidation catalysts is vital for economically feasible water-splitting systems. Cobalt phosphate (CoPi)-based catalysts belong to the relevant class of nonprecious electrocatalysts studied for the oxygen evolution reaction (OER). In this work, an in-depth investigation of the electrochemical activation of CoPi-based electrocatalysts by cyclic voltammetry (CV) is presented. Atomic layer deposition (ALD) is adopted because it enables the synthesis of CoPi films with cobalt-to-phosphorous ratios between 1.4 and 1.9. It is shown that the pristine chemical composition of the CoPi film strongly influences its OER activity in the early stages of the activation process as well as after prolonged exposure to the electrolyte. The best performing CoPi catalyst, displaying a current density of 3.9 mA cm-2 at 1.8 V versus reversible hydrogen electrode and a Tafel slope of 155 mV/dec at pH 8.0, is selected for an in-depth study of the evolution of its electrochemical properties, chemical composition, and electrochemical active surface area (ECSA) during the activation process. Upon the increase of the number of CV cycles, the OER performance increases, in parallel with the development of a noncatalytic wave in the CV scan, which points out to the reversible oxidation of Co2+ species to Co3+ species. X-ray photoelectron spectroscopy and Rutherford backscattering measurements indicate that phosphorous progressively leaches out the CoPi film bulk upon prolonged exposure to the electrolyte. In parallel, the ECSA of the films increases by up to a factor of 40, depending on the initial stoichiometry. The ECSA of the activated CoPi films shows a universal linear correlation with the OER activity for the whole range of CoPi chemical composition. It can be concluded that the adoption of ALD in CoPi-based electrocatalysis enables, next to the well-established control over film growth and properties, to disclose the mechanisms behind the CoPi electrocatalyst activation.

Non-Stoichiometry Induced Exsolution of Metal Oxide Nanoparticles via Formation of Wavy Surfaces and their Enhanced Electrocatalytic Activity: Case of Misfit Calcium Cobalt Oxide

Most heterogeneous catalytic reactions demand high density and yet spatially separated nanoparticles that are strongly anchored on the oxide surfaces. Such nanoparticles can be deposited or synthesized in situ via nonstoichiometric methods. To date, nanoparticles have been exsolved from perovskite oxide surfaces using nonstoichiometric processes. However, the density of the space-separated nanoparticles on the oxide surfaces is still low. And less attention is paid toward the changes that happen to the host during the nanoparticle exsolution process. In this work, we demonstrated in situ exsolution of ultrafine nanoparticles (∼5 nm) of either Co₃O₄ or Ca(OH)₂ via judicious control of nonstoichiometry in a misfit Ca₃Co₄O₉ (CCO). The nanoparticle density over the CCO surface reached as high as 8500/μm², which is significantly higher than previously reported values. High-resolution electron microscopy studies reveal the formation mechanism of Co₃O₄ nanoparticles over CCO, and the formation takes palace via the formation of wavy surfaces on the CCO. Defects caused by the nonstoichiometric synthesis created microstrain within the host CCO, resulting in making the new density of states near the Fermi energy. Further, the exsolution process turned the inert host (CCO) into electrocatalytically active toward water splitting. The nonstoichiometric samples obtained by shorter annealing times showed high electrocatalytic behavior for the hydrogen evolution (HER) and oxygen evolution (OER) reactions. The catalytic activity is further enhanced (reaching overpotential of 320 mV and 410 mV for HER and OER respectively, for a current density of 10 mA/cm²) by removing the surface nanoparticles. The observation indicates that the active sites that are produced during the nonstoichiometric synthesis also present in the bulk of the CCO (host). We believe that similar nonstoichiometric synthesis can be applied to a wide variety of tricomponent systems, and they could endow the hosts with novel properties for applications such as catalysis and thermoelectrics.

Nitrogen-Doped Mixed-Phase Cobalt Nanocatalyst Derived from a Trinuclear Mixed-Valence Cobalt(III)/Cobalt(II) Complex for High-Performance Oxygen Evolution Reaction

Because of a continuous increase in energy demands and environmental concerns, a focus has been on the design and construction of a highly efficient, low-cost, environmentally friendly, and noble-metal free electrocatalyst for energy technology. Herein we report facile synthesis of the mixed-valence trinuclear cobalt complex 1 by the reaction of 2-amino-1-phenylethanol and CoCl₂·6H₂O in methanol as the solvent at room temperature. Further, 1 was reduced by using aqueous N₂H₄ as a simple reducing agent, followed by calcination at 300 °C for 3 h, yielding a nitrogen-doped mixed phase cobalt [β-Co(OH)₂ and CoO] nanocatalyst (N@MPCoNC). Both 1 and N@MPCoNC were characterized by various physicochemical techniques. Moreover, 1 was authenticated by single-crystal X-ray diffraction studies. The hybrid N@MPCoNC reveals a unique electronic and morphological structure, offering a low overpotential of 390 mV for a stable current density of 10 mA cm^-2 with high durability. This N@MPCoNC showed excellent electrocatalytic as well as photocatalytic activity for oxygen evolution reaction compared to 1.

A Janus cobalt nanoparticles and molybdenum carbide decorated N-doped carbon for high-performance overall water splitting

The fabrication of high-performance and stable electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is of importance for sustainable water-splitting technologies. Herein, the cobalt (Co) nanoparticles and molybdenum carbide (Mo₂C) heterostructures anchored N-doped carbon (Co/Mo₂C@NC-800) was designed as bifunctional electrocatalyst for overall water splitting via a simple pyrolysis approach for metal organic frameworks (MOFs) precursor. This composite shows a remarkable performance for HER and OER with a small overpotential of 121 mV and 311 mV at 10 mA cm^-2, respectively. When the optimized electrocatalyst was employed as both anode and cathode for overall water splitting in a two-electrode system, the electrolyzer achieves a low cell voltage of 1.67 V at 10 mA cm^-2 in 1 M KOH, as well as a superior and stable long-time operation of 30 h. The promising hybrid material demonstrates excellent electrocatalysis performance due to effective combination of the best of both worlds: Mo₂C with remarkable HER performance and Co nanoparticles with excellent OER activity. The Mo₂C possesses strong hydrogen binding energy and Co exhibits prominent electrical conductivity, thus the construction of heterostructures achieves more active sites with different functions and significantly boosts HER and OER process. The novel and effective synthesis strategy provides new insights into the design of outstanding non-noble metal bifunctional electrocatalysts for overall water splitting.

Di-tert-butylphosphate Derived Thermolabile Calcium Organophosphates: Precursors for Ca(H2PO4)2, Ca(HPO4), α-/β-Ca(PO3)2, and Nanocrystalline Ca10(PO4)6(OH)2

Thermally and hydrolytically unstable di-tert-butyl phosphate (dtbp-H) has been used as synthon to prepare discrete and polymeric calcium phosphates that are convenient single-source precursors for a range of calcium phosphate ceramic biomaterials. The reactivity of dtbp-H toward two different calcium sources has been found to vary significantly, e.g., the reaction of Ca(OMe)₂ with dtbp-H in a 1:6 molar ratio in petroleum ether forms a mononuclear calcium hexa-phosphate complex [Ca(dtbp)₂(dtbp-H)₄] (1), whereas the change of calcium source to CaH₂, in a 1:2 molar ratio under otherwise similar reaction conditions, yields the calcium phosphate polymer, [Ca(μ-dtbp)₂(H₂O)₂·H₂O]_n(2). Compounds 1 and 2 have been extensively characterized by various spectroscopic and analytical techniques. The solid-state structures of both 1 and 2 have been determined by single-crystal X-ray diffraction studies. In discrete molecule 1, the central calcium ion is surrounded by two anionic dtbp and four neutral dtbp-H ligands in an octahedral coordination environment. Compound 2 is a one-dimensional polymer in which adjacent calcium ions are connected through double dtbp bridges. Solid-state thermolysis of bulk 1 in air leads to the exclusive formation of calcium metaphosphate β-Ca(PO₃)₂ in the entire temperature range of 400-800 °C. Thermal decomposition of polymer 2, however, can be fine-tuned to produce either α-Ca(PO₃)₂ or β-Ca(PO₃)₂ depending on the thermolysis conditions employed. Although the sample sintered at 600 °C produces exclusively α-form of Ca(PO₃)₂, the sample annealed at 800 °C or above produces β-form. Both α- and β-forms can also be successively formed one after other by a slow heating of a freshly prepared 2 on the powder diffractometer sample holder. Additional forms of ceramic phosphates have been prepared by solvothermal conditions because of the highly labile nature of the tert-butoxy groups of dtbp in 1 and 2. Solution decomposition of either 1 or 2 in boiling toluene at 140 °C in a sealed tube produces calcium dihydrogen phosphate [Ca(H₂PO₄)₂·H₂O] as the only product in the form of single crystals. Solution thermolysis of 2 in protic solvents such as water and methanol can be biased to produce other calcium phosphate biomaterials such as hydroxyapatite [Ca₁₀(PO₄)₆(OH)₂]and calcium monohydrogen phosphate [Ca(HPO₄)] in the presence of additional calcium precursors such as CaO and Ca(OMe)₂, respectively.

The morphology controlled growth of Co11(HPO3)8(OH)6 on nickel foams for quasi-solid-state supercapacitor applications

Co₁₁(HPO₃)₈(OH)₆ microstructures with different morphologies growing on NF were synthesized under different conditions, and the flower-like sample presents excellent electrochemical properties.