Iron Selenide Microcapsules as Universal Conversion-Typed Anodes for Alkali Metal-Ion Batteries

Oyster Pearl-Shaped Ternary Iron Chalcogenide, FeSe0.5Te0.5, Films on FTO through Electrochemical Growth from the Exchange of Chalcogens Boosted the Enzyme-Free Urea-Sensing Ability toward Real Analytes

Here, iron chalcogenide thin films were developed for the first time by using the less hazardous electrodeposition technique at optimized conditions on an FTO glass substrate. The chalcogenides have different surface, morphological, structural, and optical properties, as well as an enzyme-free sensing behavior toward urea. Numerous small crystallites of about ∼20 to 25 nm for FeSe, ∼18 to 25 nm for FeTe, and ∼18 to 22 nm in diameter for FeSeTe are observed with partial agglomeration under an electron microscope, having a mixed phase of tetragonal and orthorhombic structures of FeSe, FeTe, and, FeSeTe, respectively. Profilometry, XRD, FE-SEM, HR-TEM, XPS, EDX, UV-vis spectroscopy, and FT-IR spectroscopy were used for the analysis of binary and ternary composite semiconductors, FeSe, FeTe, and FeSeTe, respectively. Electrochemical experiments were conducted with the chalcogenide thin films and urea as the analyte in phosphate-buffered media at a pH of ∼ 7.4 in the concentration range of 3-413 μM. Cyclic voltammetry was performed to determine the sensitivity of the prepared electrode at an optimized scan rate of 50 mV s-1. The electrodeposited chalcogenide films appeared with a low detection limit and satisfactory sensitivity, of which the ternary chalcogenide film has the lowest LOD of 1.16 μM and the maximum sensitivity of 74.22 μA μM-1 cm-2. The transition metal electrode has a very wide range of detection limit of 1.25-2400 μM with a short response time of 4 s. This fabricated biosensor is capable of exhibiting almost 75% of its starting activity after 2 weeks of storage in the freezer at 4 °C. Simple methods of preparation, a cost-effective process, and adequate electrochemical sensing of urea confirm that the prepared sensor is suitable as an enzyme-free urea sensor and can be utilized for future studies.

Strain Self-Adaptive Iron Selenides Toward Stable Na+ -Ion Batteries with Impressive Initial Coulombic Efficiency

High tap density electrodes play a vital role in developing rechargeable batteries with high volumetric capacities, however, developing advanced electrodes with satisfied capacity, excellent structural stability, and achieving the resulted batteries with a high initial Coulombic efficiency (ICE) and good rate capability with long lifespan simultaneously, are still an intractable challenge. Herein, an ultrahigh ICE of 94.1% and stable cycling of carbon-free iron selenides anode is enabled with a high tap density of 2.57 g cm-3 up to 4000 cycles at 5 A g-1 through strain-modulating by constructing a homologous heterostructure. Systematical characterization and theoretical calculation show that the self-adaptive homologous heterointerface alleviates the stress of the iron selenide anodes during cycling processes and subsequently improves the stability of the assembled batteries. Additionally, the well-formed homologous heterostructure also contributes to the rapid Na+ diffusion kinetic, increased charge transfer, and good reversibility of the transformation reactions, endowing the appealing rate capability of carbon-free iron selenides. The proposed design strategy provides new insight and inspiration to aid in the ongoing quest for advanced electrode materials with high tap densities and excellent stability.

Design of Ion Channel Confined Binary Metal Cu-Fe Selenides for All-Climate, High-Capacity Sodium Ion Batteries

Exploring special anode materials with high capacity, stable structure, and extreme temperature feasibility remains a great challenge in secondary sodium based energy systems. Here, a bimetallic Cu-Fe selenide nanosheet with refined nanostructure providing confined internal ion transport channels are reported, in which the structure improves the pseudocapacitance and reduces the charge transfer resistance for making a significant contribution to accelerating the reaction dynamics. The CuFeSe2 nanosheets have a high initial specific capacity of 480.4 mAh g-1 at 0.25 A g-1 , showing impressively excellent rate performance and ultralong cycling life over 1000 cycles with 261.1 mAh g-1 at 2.5 A g-1 . Meanwhile, it exhibits a good sodium storage performance at extreme temperatures from -20 °C to 50 °C, supporting at least 500 cycles. Besides, the CuFeSe2 ||Na3 V2 (PO4 )3 /C full cell delivers a high specific capacity of 168.5 mAh g-1 at 0.5 A g-1 and excellent feasibility for over 600 cycles long cycling. Additionally, the Na+ storage mechanisms are further revealed by ex situ X-ray diffraction (XRD) and in situ transmission electron microscopy (TEM) techniques. A feasible channelized structural design strategy is provided that inspires new instruction into the development of novel materials with high structural stability and low volume expansion rate toward the application of other secondary batteries.

Ultrafast and ultrastable FeSe2embedded in nitrogen-doped carbon nanofibers anode for sodium-ion half/full batteries

Transition metal selenides are considered as promising anode materials for fast-charging sodium-ion batteries due to their high theoretical specific capacity. However, the low intrinsic conductivity, particle aggregation, and large volume expansion problems can severely inhibit the high-rate and long-cycle performance of the electrode. Herein, FeSe2nanoparticles embedded in nitrogen-doped carbon nanofibers (FeSe2@NCF) have been synthesized using the electrospinning and selenization process, which can alleviate the volume expansion and particle aggregation during the sodiation/desodiation and improve the electrical conductivity of the electrode. The FeSe2@NCF electrode delivers the outstanding specific capacity of 222.3 mAh g-1at a fast current density of 50 A g-1and 262.1 mAh g-1at 10 A g-1with the 87.8% capacity retention after 5000 cycles. Furthermore, the Na-ion full cells assembled with pre-sodiated FeSe2@NCF as anode and Na3V2(PO4)3/C as cathode exhibit the reversible specific capacity of 117.6 mAh g-1at 5 A g-1with the 84.3% capacity retention after 1000 cycles. This work provides a promising way for the conversion-based metal selenides for the applications as fast-charging sodium-ion battery anode.

Recent Advances and Challenges in Ti-Based Oxide Anodes for Superior Potassium Storage

Developing high-performance anodes is one of the most effective ways to improve the energy storage performances of potassium-ion batteries (PIBs). Among them, Ti-based oxides, including TiO2, K2Ti6O13, K2Ti4O9, K2Ti8O17, Li4Ti5O12, etc., as the intrinsic structural advantages, are of great interest for applications in PIBs. Despite numerous merits of Ti-based oxide anodes, such as fantastic chemical and thermal stability, a rich reserve of raw materials, non-toxic and environmentally friendly properties, etc., their poor electrical conductivity limits the energy storage applications in PIBs, which is the key challenge for these anodes. Although various modification projects are effectively used to improve their energy storage performances, there are still some related issues and problems that need to be addressed and solved. This review provides a comprehensive summary on the latest research progress of Ti-based oxide anodes for the application in PIBs. Besides the major impactful work and various performance improvement strategies, such as structural regulation, carbon modification, element doping, etc., some promising research directions, including effects of electrolytes and binders, MXene-derived TiO2-based anodes and application as a modifier, are outlined in this review. In addition, noteworthy research perspectives and future development challenges for Ti-based oxide anodes in PIBs are also proposed.

Three-Dimensional (3D) Ordered Macroporous Bimetallic (Mn,Fe) Selenide/Carbon Composite with Heterojunction Interface for High-Performance Sodium Ion Batteries

Transition-metal selenides have captured significant research attention as anode materials for sodium ion batteries (SIBs) due to their high theoretical specific capacities and excellent electronic conductivity. However, volumetric expansion and inferior cycle life still hinder their practical application. Herein, a three-dimensional (3D) ordered macroporous bimetallic (Mn,Fe) selenide modified by a carbon layer (denoted as 3DOM-MnFeSex@C) composite containing a heterojunction interface is fabricated through selenizing a 3D ordered macroporous Mn-based Prussian Blue analogue single crystal. The 3DOM-MnFeSex@C exhibits hierarchically porous architecture with enhanced mass-transfer efficiency; MnSe and FeSe2 particles are encapsulated into macroporous carbon framework, which can significantly promote the electronic conductivity and maintain the structural integrity. The density functional theory calculation indicates that the heterojunction interface between MnSe and FeSe2 has been successfully engineered so that Na+ can be readily adsorbed and rapidly converted, thus promoting the reaction kinetics and extending the cyclic life. As expected, the 3DOM-MnFeSex@C composite delivers excellent rate performance (277.6 mA h g-1 at 10 A g-1), and prolonged cycling life (191.6 mA h g-1 even after 1000 cycles at 2 A g-1) as a sodium storage anode. The sodium storage mechanism of the composite was further investigated by in situ X-ray diffraction and ex situ high-resolution transmission electron microscopy characterization techniques.

Achieving Stable and Ultrafast Potassium Storage of Antimony Anode via Dual Confinement of MXene@Carbon Framework

Antimony-based anode materials are recognized for their high potassium storage capacities and appropriate operating potentials. However, the large volume expansion of Sb during the potassiation/depotassiation process, which results in a quick capacity decay, severely limits its practical application in potassium-ion batteries (PIBs). Here, a carbon-coated Sb/MXene heterostructure composite (CSM) is synthesized by adsorption of Sb3+ on MXene nanosheets via Sb-O-Ti bonds followed by carbothermic reduction to construct dual-confined MXene@carbon conductive framework capable of withstanding high volume expansion of Sb and conducive to enabling accelerated electron transfer kinetics. The CSM composite, particularly CSM-700, when configured as an anode for PIBs, realized high capacity (484.4 mAh g-1 at 0.1 A g-1 ), an ultra-stable cycling performance with a high reversible capacity of 435.9 mAh g-1 at 0.1 A g-1 after 100 cycles corresponding to a capacity retention rate of 90.0%, and superior rate performance of 323.0 mAh g-1 at 1 A g-1 . The proposed strategy offers a simple route to construct high-performance Sb-based anodes for advanced PIBs.

Designing Sphere-like FeSe2-Carbon Composites with Rational Construction of Interfacial Traits towards Considerable Sodium-storage Capabilities

Due to their low cost and high stability, sodium-ion batteries have been increasingly studied. However, their further development is limited by the relative energy density, resulting in the search for high-capacity anodes. FeSe₂ displays high conductivity and capacity but still suffers from sluggish kinetics and serious volume expansion. Herein, through sacrificial template methods, a series of sphere-like FeSe₂-carbon composites are successfully prepared, displaying uniform carbon coatings and interfacial chemical FeOC bonds. Moreover, benefiting from the unique traits of precursor and acid treatment, rich structural voids are prepared, effectively alleviating volume expansion. Utilized as anodes of sodium-ion batteries, the optimized sample displays considerable capacity, achieving 462.9 mAh g^-1, with 88.75% coulombic efficiency at 1.0 A g^-1. Even at 5.0 A g^-1, their capacity can be kept at approximately 318.8 mAh g^-1, while the stable cycling can be prolonged to 200 cycles above. Supported by the detailed kinetic analysis, it can be noted that the existing chemical bonds facilitate the fast shuttling of ions at the interface, and the enhanced surface/near-surface properties are further vitrified. Given this, the work is expected to offer valuable insights for the rational design of metal-based samples toward advanced sodium-storage materials.

Dual enzyme-like Co-FeSe2 nanoflowers with GSH degradation capability for NIR II-enhanced catalytic tumor therapy

Nanozymes mediated catalytic therapy can produce toxic reactive oxygen species (ROS) and destroy the metabolic balance of tumor cells, providing a new direction for cancer treatment. However, the catalytic efficiency of a single nanozyme is limited by the complexity of the tumor microenvironment (hypoxia, GSH overexpression, etc.). In order to overcome these problems, we designed flower-like Co-doped FeSe₂ (Co-FeSe₂) nanozymes by a simple wet chemistry method. Co-FeSe₂ nanozymes not only exhibit high POD and OXD-mimicking activities for facile kinetics, but also effectively consume over-expressed glutathione (GSH), inhibiting the consumption of generated ROS and destroying the metabolic balance of the tumor microenvironment. These catalytic reactions trigger cell death through apoptosis and ferroptosis dual pathways. More importantly, under the NIR II laser irradiation, the catalytic activities of Co-FeSe₂ nanozymes are boosted, confirming the photothermal and catalytic synergistic tumor therapy. This study takes advantage of self-cascading engineering that offers new ideas for designing efficient redox nanozymes and promoting their clinical translation.

Metal Selenides Anode Materials for Sodium Ion Batteries: Synthesis, Modification, and Application

The powerful and rapid development of lithium-ion batteries (LIBs) in secondary batteries field makes lithium resources in short supply, leading to rising battery costs. Under the circumstances, sodium-ion batteries (SIBs) with low cost, inexhaustible sodium reserves, and analogous work principle to LIBs, have evolved as one of the most anticipated candidates for large-scale energy storage devices. Thereinto, the applicable electrode is a core element for the smooth development of SIBs. Among various anode materials, metal selenides (MSe_x ) with relatively high theoretical capacity and unique structures have aroused extensive interest. Regrettably, MSe_x suffers from large volume expansion and unwished side reactions, which result in poor electrochemistry performance. Thus, strategies such as carbon modification, structural design, voltage control as well as electrolyte and binder optimization are adopted to alleviate these issues. In this review, the synthesis methods and main reaction mechanisms of MSe_x are systematically summarized. Meanwhile, the major challenges of MSe_x and the corresponding available strategies are proposed. Furthermore, the recent research progress on layered and nonlayered MSe_x for application in SIBs is presented and discussed in detail. Finally, the future development focuses of MSe_x in the field of rechargeable ion batteries are highlighted.

Thermodynamic Transformation of Crystalline Organic Hybrid Iron Selenide to FexSey@CN Microrods for Sodium Ion Storage

Carbon-coated metal chalcogenide composites have been demonstrated as one type of promising anode material for sodium-ion batteries (SIBs). However, combining carbon materials with micronanoparticles of metal chalcogenide always involve complicated processes, such as polymer coating, carbonization, and sulfidation/selenization. To address this issue, herein, we reported a series of carbon-coated FexSey@CN (FexSey = FeSe2, Fe3Se4, Fe7Se8) composites prepared via the thermodynamic transformation of a crystalline organic hybrid iron selenide [Fe(phen)2](Se4) (phen = 1,10-phenanthroline). By pyrolyzing the bulk crystals of [Fe(phen)2](Se4) at different temperatures, FexSey microrods were formed in situ, where the nitrogen-doped carbon layers were coated on the surface of the microrods. Moreover, all the as-prepared FexSey@CN composites exhibited excellent sodium-ion storage capabilities as anode materials in SIBs. This work proves that crystalline organic hybrid metal chalcogenides can be used as a novel material system for the in situ formation of carbon-coated metal chalcogenide composites, which could have great potential in the application of electrochemical energy storage.

Synthesis of NiSe2 /Fe3 O4 Nanotubes with Heteroepitaxy Configuration as a High-Efficient Oxygen Evolution Electrocatalyst

The rational design of high-efficient non-noble metal electrocatalysts for oxygen evolution reactions (OER) is of significance in electrochemical energy conversion. However, such low-cost but highly active electrocatalysts remain poorly developed because of the daunting synthetic challenge. Here, the synthesis of NiSe₂ /Fe₃ O₄ nanotubes via a facile self-templating strategy, which manifests unique tetragonal morphology, asymmetric hollow interior, and unusual but adaptable heteroepitaxy structure, is reported. Benefiting from sufficient active sites and their improved activity around the heterointerface, accompanied by the good conductivity, the NiSe₂ /Fe₃ O₄ nanotubes exhibit as a superior OER electrocatalyst, which affords the current density of 10 mA cm^-2 at a very small overpotential of 199 mV, high attainable current density beyond 200 mA cm^-2 , and mass activity of 984.5 A g^-1 , as well as excellent stability for 100 h in the alkaline media. This work provides a unique synthetic pathway to fabricate superior OER electrocatalysts by optimizing their composition and architecture.

Iron Selenide-Based Heterojunction Construction and Defect Engineering for Fast Potassium/Sodium-Ion Storage

Suitable anode materials with high capacity and long cycling stability, especially capability at high current densities, are urgently needed to advance the development of potassium ion batteries (PIBs) and sodium ion batteries (SIBs). Herein, a porous Ni-doped FeSe₂ /Fe₃ Se₄ heterojunction encapsulated in Se-doped carbon (NF₁₁ S/C) is designed through selenization of MOFs precursor. The porous composite possesses enriched active sites and facilitates transport for both ion and electron. Ni-doping is adopted to enrich the lattice defects and active sites. The Se-C bond and carbon framework endow integrity of the composite and hamper aggregation of selenide nano-particles during potassiation/de-potassiation. The NF₁₁ S/C exhibits exceptional rate performance and ultra-long cycling stability (177.3 mA h g^-1 after 3050 cycles at 2 A g^-1 for PIBs and 208.8 mA h g^-1 after 2000 cycles at 8 A g^-1 for SIBs). The potassiation/de-potassiation mechanism is investigated via ex-situ X-ray powder diffraction, high-resolution transmission electron microscopy, X-ray photoelectron spectrocopy and Raman analysis. PTCDA//NF₁₁ S/C full cell stably cycles for 1200 cycles at 200 mA g^-1 with a capacity of 103.7 mA h g^-1 , indicating the high application potential of the electrode for highly stable rechargeable batteries.

Electrolyte formulation strategies for potassium-based batteries

Potassium (K)-based batteries are viewed as the most promising alternatives to lithium-based batteries, owing to their abundant potassium resource, lower redox potentials (-2.97 V vs. SHE), and low cost. Recently, significant achievements on electrode materials have boosted the development of potassium-based batteries. However, the poor interfacial compatibility between electrode and electrolyte hinders their practical. Hence, rational design of electrolyte/electrode interface by electrolytes is the key to develop K-based batteries. In this review, the principles for formulating organic electrolytes are comprehensively summarized. Then, recent progress of various liquid organic and solid-state K⁺ electrolytes for potassium-ion batteries and beyond are discussed. Finally, we offer the current challenges that need to be addressed for advanced K-based batteries.

Recent Advances and Perspectives of Battery-Type Anode Materials for Potassium Ion Storage

Potassium ion energy storage devices are competitive candidates for grid-scale energy storage applications owing to the abundancy and cost-effectiveness of potassium (K) resources, the low standard redox potential of K/K⁺, and the high ionic conductivity in K-salt-containing electrolytes. However, the sluggish reaction dynamics and poor structural instability of battery-type anodes caused by the insertion/extraction of large K⁺ ions inhibit the full potential of K ion energy storage systems. Extensive efforts have been devoted to the exploration of promising anode materials. This Review begins with a brief introduction of the operation principles and performance indicators of typical K ion energy storage systems and significant advances in different types of battery-type anode materials, including intercalation-, mixed surface-capacitive-/intercalation-, conversion-, alloy-, mixed conversion-/alloy-, and organic-type materials. Subsequently, host-guest relationships are discussed in correlation with the electrochemical properties, underlying mechanisms, and critical issues faced by each type of anode material concerning their implementation in K ion energy storage systems. Several promising optimization strategies to improve the K⁺ storage performance are highlighted. Finally, perspectives on future trends are provided, which are aimed at accelerating the development of K ion energy storage systems.

Constructing electronic interconnected bimetallic selenide-filled porous carbon nanosheets for stable and highly efficient sodium-ion half/full batteries

Owing to their large theoretical capacity and relatively high electronic conductivity, transition metal selenides have been investigated as potential anodes for energy storage applications. On the other hand, the quick capacity decline induced by volume expansion during cycling and unconnected conducting network of the transition metal selenide-based electrode severely limit their employment in sodium-ion batteries (SIBs). Herein, a simple solvent ultrasonic technique and pyrolysis selenation process were used to make a porous N-doped carbon nanosheet-supported FeSe₂/CoSe₂ electrode. The electrochemical kinetics could be improved, and the stress generated by volume expansion could be efficiently adjusted by exquisitely constructed boundary of the FeSe₂/CoSe₂-CN electrode. As expected, the FeSe₂/CoSe₂-CN porous nanosheets exhibited a high Na⁺ storage capacity of 350 mA h g^-1 (10 A g^-1, 1000 cycles). Kinetic studies were conducted to explore the Na⁺ storage mechanism of FeSe₂/CoSe₂-CN. The as-constructed full sodium-ion batteries, when combined with Na₃V₂(PO₄)₂O₂F, have a phenomenal energy density (109 W h kg^-1), encouraging the exploration of energy-related components with the high-energy density properties.

Ingeniously Designed Yolk-Shell-Structured FeSe2@NDC Nanoboxes as an Excellent Long-Life and High-Rate Anode for Half/Full Na-Ion Batteries

Thanks to their high conductivity and theoretical capacity, transition metal selenides have demanded significant research attention as prospective anodes for sodium-ion batteries. Nevertheless, their practical applications are hindered by finite cycle life and inferior rate performance because of large volume expansion, polyselenide dissolution, and sluggish dynamics. Herein, the nitrogen-doped carbon (NC)-coated FeSe₂ nanoparticles encapsulated in NC nanoboxes (termed FeSe₂@NDC NBs) are fabricated through the facile thermal selenization of polydopamine-wrapped Prussian blue precursors. In this composite, the existing nitrogen-doped dual carbon layer improves the intrinsic conductivity and structural integrity, while the unique porous yolk-shell architecture significantly mitigates the volume swelling during the sodium/desodium process. Moreover, the derived Fe-N-C bonds can effectively capture polyselenide, as well as promote Na⁺ transportation and good reversible conversion reaction. As expected, the FeSe₂@NDC NBs deliver remarkable rate performance (374.9 mA h g^-1 at 10.0 A g^-1) and long-cycling stability (403.3 mA h g^-1 over 2000 loops at 5.0 A g^-1). When further coupled with a self-made Na₃V₂(PO₄)₃@C cathode in sodium-ion full cells, FeSe₂@NDC NBs also exhibit considerably high and stable sodium-storage performance.

A study on the high efficiency reduction of p-nitrophenol (4-NP) by a Fe(OH)3/Fe2O3@Au composite catalyst

Precious metal nanometric catalysts are widely used in the removal of harmful substances. In the process of synthesis and catalytic reaction, it is particularly important to study green and simple synthesis methods and high catalytic efficiency. In this paper, a green one-step method was used to synthesize the Fe(OH)₃/Fe₂O₃@Au composite catalyst, in which Au was single atom-dispersed. The removal of 4-nitrophenol (4-NP), a typical dangerous chemical widely existing in factory waste gas, waste water and automobile exhaust gas, was catalysed by Fe(OH)₃/Fe₂O₃@Au. The catalytic performance of Fe(OH)₃/Fe₂O₃@Au with different synthesis conditions (different amounts of MES, NaBH₄, FeSO₄, Au and Pt) on the 4-NP reduction reaction were systematically studied. Finally, the stability and recyclability of Fe(OH)₃/Fe₂O₃@Au composite nanocatalyst were investigated thoroughly.