The Key Effect of Carboxyl Group and CuN2 O2 Coordinate Structure for Cu, N Co-Doped Carbon Dots with Peroxidase-Like Property

Strategic Surface Engineering of Lithium Metal Anodes: Simultaneous Native Layer Elimination and Protective Layer Formation via Gas-Solid Reaction

Lithium (Li) metal has received significant attention as an anode material for next-generation batteries due to its high theoretical capacity and low redox potential. However, the high reactivity of Li metal leads to the formation of a native layer on its surface, inducing nonuniform Li+ flux at the electrolyte/Li metal interface, which promotes the growth of Li metal dendrites. In this study, perfluorooctyltriethoxysilane (PFOTES) was vaporized to chemically react with the native layer and modify the Li metal surface. This gas-solid reaction removes the native layer while simultaneously forming a homogeneous solid electrolyte interphase (SEI) layer. The Si-O-Si network formed through condensation reactions between PFOTES molecules, combined with the fluorinated carbon chain of PFOTES, facilitates rapid Li+ kinetics at the Li metal/electrolyte interface. Consequently, the exchange current density of PFOTES-modified Li (PFOTES-Li) increased to 0.2419 mA cm-2, which is 20 times higher than that of Bare-Li (0.0119 mA cm-2). The SEI layer derived from PFOTES effectively mitigates Li pulverization and the formation of dead Li during the long-term cycling. As a result, the PFOTES-Li||LiNi0.8Mn0.1Co0.1O2 full cell exhibits an excellent discharge capacity of 203.4 mAh g-1 under a high areal loading of 4.2 mAh cm-2. This study demonstrates a gas-solid reaction strategy for removing the native layer from the Li metal surface while forming a stable SEI layer, thereby ensuring high Li+ conductivity and mechanical stability, thus improving the cycling stability of Li metal batteries.

Designing cobalt-nickel dual-atoms on boron, nitrogen-codoped carbon nanotubes for carbon dioxide electroreduction to syngas

Developing highly efficient electrocatalysts to produce syngas with a stable hydrogen/carbon monoxide (H2/CO) ratio in a wide potential window via electrochemical carbon dioxide (CO2) reduction is desperately required but still challenging. Herein, a dual-atomic site on boron, nitrogen-codoped carbon nanotubes (BCN) has been designed, containing both cobalt (CoN5) and nickel (NiN3B2) sites. Benefiting from the structure advantage and the bifunctional Co/Ni sites, such designed catalyst (CoNi-BCN) demonstrates remarkable performance for syngas production, achieving a stable H2/CO ratio of 1.5 over a broad potential window from -0.47 to -0.87 V vs. RHE. By tuning the Co/Ni molar ratio in CoNi-BCN, the H2/CO ratio can be adjusted from 0.5 to 2. In addition, this electrocatalyst exhibits outstanding stability within a long-term 20 h electrolyzing. Both experimental and theoretical calculation results confirm the primary role of the Co sites in H2 production and the Ni sites in CO production, as well as the preferred process for H2 evolution. This work provides a strategy in the construction of dual-site catalysts for efficient syngas production, which is significant for practical applications.

Elucidating Manganese Single-Atom Doping: Strategies for Fluorescence Enhancement in Water-Soluble Red-Emitting Carbon Dots and Applications for FL/MR Dual Mode Imaging

The absence of the enhancement of fluorescence in carbon dots (CDs) through doping with transition metal atoms (TMAs) hinders the advancement of multi-modal bio-imaging CDs with high photoluminescence quantum yield (PLQY). Herein, Mn-atomically-doped R-CDs (R-Mn-CDs) with a high PLQY of 41.3% in water is presented, enabling efficient in vivo dual-mode fluorescence/magnetic resonance (MR) imaging. The comprehensive characterizations reveal that the incorporation of Mn atoms leads to a Mn-N2O2 coordinating structure, resulting in five significant effects: an increase in sp2 conjugation domains, a reduction in band gap, a decreased oxidation level, an increase in photo-excited electron numbers, and the suppression of non-radiative electron relaxation pathways. Collectively, these factors contribute to the remarkable PLQY of R-Mn-CDs. Additionally, the doping of Mn atoms also endows R-Mn-CDs with superior MR imaging capabilities due to, which highlights their promising prospect as a dual-modal bio-imaging platform for fluorescence/MR imaging. Furthermore, the findings indicate that the introduction of various TMAs, such as Mn, Zn, Ni, and Cu, can universally improve the PLQY of water-soluble CDs through the construction of TMAs─O bonds. This research provides valuable theoretical insights into the mechanisms underlying the fluorescence enhancement induced by TMAs doping and offers guidance for the future design of high PLQY CDs.

Edge-doped substituents as an emerging atomic-level strategy for enhancing M-N4-C single-atom catalysts in electrocatalysis of the ORR, OER, and HER

M-N4-C single-atom catalysts (MN4) have gained attention for their efficient use at the atomic level and adjustable properties in electrocatalytic reactions like the ORR, OER, and HER. Yet, understanding MN4's activity origin and enhancing its performance remains challenging. Edge-doped substituents profoundly affect MN4's activity, explored in this study by investigating their interaction with MN4 metal centers in ORR/OER/HER catalysis (Sub@MN4, Sub = B, N, O, S, CH3, NO2, NH2, OCH3, SO4; M = Fe, Co, Ni, Cu). The results show overpotential variations (0 V to 1.82 V) based on Sub and metal centers. S and SO4 groups optimize FeN4 for peak ORR activity (overpotential at 0.48 V) and reduce OER overpotentials for NiN4 (0.48 V and 0.44 V). N significantly reduces FeN4's HER overpotential (0.09 V). Correlation analysis highlights the metal center's key role, with ΔG*H and ΔG*OOH showing mutual predictability (R2 = 0.92). Eg proves a reliable predictor for Sub@CoN4 (ΔG*OOH/ΔG*H, R2 = 0.96 and 0.72). Machine learning with the KNN model aids catalyst performance prediction (R2 = 0.955 and 0.943 for ΔG*OOH/ΔG*H), emphasizing M-O/M-H and the d band center as crucial factors. This study elucidates edge-doped substituents' pivotal role in MN4 activity modulation, offering insights for electrocatalyst design and optimization.

Nanoenzyme-based sensors for the detection of anti-tumor drugs

Natural enzymes are a class of biological catalysts that can catalyze a specific substrate. Although natural enzymes have catalytic activity, they are susceptible to the influence of external environment such as temperature, and storage requirements are more stringent. Since the first discovery of magnetic Fe3O4 nanoparticles with peroxidase-like activity in 2007, the research on nanoenzymes has entered a rapid development stage. Nanoenzymes synthesized by chemical methods not only have the catalytic activity of natural enzymes but also are more stable, easy to store, and convenient to prepare. Anthracyclines, as a commonly used anti-tumor chemotherapy drug, will produce many side effects such as myelosuppression and liver function damage after long-term use, which will affect its therapeutic effects. This paper reviews the characteristics, classification, and mechanisms of nanoenzymes. The detection of anti-tumor drugs, especially anthracycline drugs, using a nanoenzyme-based sensor was emphatically introduced. On this basis, the application of nanoenzyme-based sensors in the detection of anti-tumor drugs is  prospected.

Single-Atom Iridium-doped Carbon Dots Nanozyme with High Peroxidase-Like Activity as Colorimetric Sensors for Multimodal Detection of Mercury Ions

Nanozyme-based colorimetric sensors are promising approaches for environmental monitoring, food safety, and medical diagnostics. However, developing novel nanozymes that exhibit high catalytic activity, good dispersion in aqueous solution, high sensitivity, selectivity, and stability is challenging. In this study, for the first time, single-atom iridium-doped carbon dot nanozymes (SA Ir-CDs) are synthesized via a simple in situ pyrolysis process. Doping carbon dots with iridium in the form of single atoms to achieve maximum atomic utilization not only enhances peroxidase (POD)-like activity to 178.81 U mg-1 but also improves the dispersibility of single-atom nanozymes in aqueous solutions over 30 days. Hence, the SA Ir-CD colorimetric platform is developed for mercury ions (Hg2+) detection and exhibited a good linear relationship from 0.01 to 10 µm and a detection limit of 4.4 nm. Notably, the changes in color can be observed not only through the naked eye but also via a smartphone, enabling convenient field and onsite monitoring without the need for sophisticated analytical equipment. In this study, an approach for fabricating single-atom metal-based carbon dot nanozymes with high POD-like activity is developed, and a new effective and easy-to-use colorimetric sensor for Hg2+ detection is constructed.

Improving the mechanical property of silk by feeding silkworm with chiral carbon dots

The influence of chiral materials on organisms is crucial. However, there is little research on the impact of chiral carbon dots (CDs), a kind of typical chiral materials, on biology. Herein, chiral CDs (L-/D-CDs) were synthesized using the thermal polymerization method from citric acid and chiral cysteine. The effect of chiral CDs on silkworms was explored through feeding silkworms with chiral CDs. The breaking strength of silk fibers (667.9 MPa) in D-CDs group exhibit a 71.4 % increase compared with control-silk (389.5 MPa), while the breaking strength of silk fibers in L-CDs group increases by 51.6 %. In addition, Fourier transform infrared spectra display CDs can prevent the transformation from random coil/α-helix structures to β-sheet structures. Furthermore, D-CDs group exhibit the highest percentage of four primary amino acids (glycine, alanine, serine, and tyrosine) relative to the total amino acids in silkworm hemolymph. This percentage is elevated by 70.5 % compared to the control group, thereby furnishing an ample supply of raw materials for the synthesis of silk proteins. In contrast, L-CDs group exhibit increase by 39.3 %. Our work provides new ideas and approaches for studying the effects of chiral materials on living organisms.

Construction of portable hydrogel kits with self-ratio optical bimodal detection and smartphone imaging for on-site nitrite screening

Accurate on-site detection of nitrite in complex matrices remains a significant challenge. Herin, we construct a self-ratio optical bimodal portable kit via co-assembling NaErF4:0.5%Tm@NaYF4@NaYbF4:0.5%Tm@NaYF4 (Er:Tm@Yb:Tm) and nitrogen-doped carbon platinum nanomaterials (Pt/CN) in sodium alginate (SA) hydrogel. Pt/CN nanomaterials are synthesized by high-temperature sintering using a zinc-based zeolite imidazolium framework as a sacrificial template. The Pt/CN nanozyme possesses excellent oxidase-like activity to produce the oxidation state 3,3',5,5'-tetramethylbenzidine (oxTMB). Nitrite mediates diazotization of oxTMB to trigger the change of absorption signals, accompanying the ratio fluorescence response of the Er:Tm@Yb:Tm. Crucially, Er:Tm@Yb:Tm and Pt/CN are embedded in SA hydrogel to fabricate a portable kit with efficient and sensitive performance. An image processing algorithm is used to analyze the nitrite-induced signal change of the portable hydrogel kit, resulting in detection limits of 0.63 μM. This method has great potential for point-of-care applications due to its reliability, long-term stability, accuracy, sensitivity, and portability.

A dual-mode composite nanozyme-based cascade colorimetric-fluorescence aptasensor for Salmonella Typhimurium detection

BACKGROUND

Salmonella Typhimurium poses a serious threat to human health worldwide, necessitating the development of a rapid, sensitive, and convenient method for S. Typhimurium detection. Nanozymes are considered ideal signal report elements, which are extensively used for developing colorimetric methods. However, single-component nanozymes display low catalytic activity, and colorimetric methods are susceptible to environmental interference, reducing the sensitivity and accuracy of detection results. To address these drawbacks, this study constructed a dual-mode composite nanozyme-based cascade colorimetric-fluorescence aptasensor for S. Typhimurium detection in food.

RESULTS

In this study, the composite Fe3O4@MIL-100(Fe) nanozymes were successful synthesized and demonstrated substantial peroxide-like activity, with 4.76-fold higher specificity activity (SA) than that of Fe3O4 nanozymes. Then, a glucose oxidase (GOx)-Fe3O4@MIL-100(Fe) cascade reaction was developed for colorimetric detection via an aptamer to facilitate the formation of Fe3O4@MIL-100(Fe)/S. Typhimurium/carboxylated g-C3N4 (CCN)-GOx sandwich complexes. Meanwhile, the fluorescence mode was achieved by measuring the fluorescence intensity of the sandwich complexes. In optimum conditions, the dual-mode detection limits (LOD) were 1.8 CFU/mL (colorimetric mode) and 1.2 CFU/mL (fluorescence mode), respectively, with the S. Typhimurium concentration ranging from 10 CFU/mL to 107 CFU/mL. Finally, the feasibility of the dual-mode colorimetric-fluorescence method was validated via three actual samples, yielding recovery rates of 77.32 % to91.17 % and 82.17 % to 103.7 %, respectively.

SIGNIFICANCE AND NOVELTY

This study successfully develops a composite nanozyme-based cascade colorimetric and fluorescence dual-mode aptasensor for S. Typhimurium detection. It presents several distinct benefits, such as a broader linear range (10-107 CFU/mL), a lower LOD value (1.2 CFU/mL), and more accurate results. More importantly, the proposed dual-mode method displays a low LOD in colorimetric mode, demonstrating considerable potential for S. Typhimurium on-site detection in food.

Materials Containing Single-, Di-, Tri-, and Multi-Metal Atoms Bonded to C, N, S, P, B, and O Species as Advanced Catalysts for Energy, Sensor, and Biomedical Applications

Modifying the coordination or local environments of single-, di-, tri-, and multi-metal atom (SMA/DMA/TMA/MMA)-based materials is one of the best strategies for increasing the catalytic activities, selectivity, and long-term durability of these materials. Advanced sheet materials supported by metal atom-based materials have become a critical topic in the fields of renewable energy conversion systems, storage devices, sensors, and biomedicine owing to the maximum atom utilization efficiency, precisely located metal centers, specific electron configurations, unique reactivity, and precise chemical tunability. Several sheet materials offer excellent support for metal atom-based materials and are attractive for applications in energy, sensors, and medical research, such as in oxygen reduction, oxygen production, hydrogen generation, fuel production, selective chemical detection, and enzymatic reactions. The strong metal-metal and metal-carbon with metal-heteroatom (i.e., N, S, P, B, and O) bonds stabilize and optimize the electronic structures of the metal atoms due to strong interfacial interactions, yielding excellent catalytic activities. These materials provide excellent models for understanding the fundamental problems with multistep chemical reactions. This review summarizes the substrate structure-activity relationship of metal atom-based materials with different active sites based on experimental and theoretical data. Additionally, the new synthesis procedures, physicochemical characterizations, and energy and biomedical applications are discussed. Finally, the remaining challenges in developing efficient SMA/DMA/TMA/MMA-based materials are presented.

Imprinted membrane-covalent organic framework platform for efficient label-free visual detection of Listeria monocytogenes and Salmonella typhimurium in food samples

BACKGROUND

Rapid and sensitive detection of foodborne pathogens in food plays a crucial role in controlling outbreaks of foodborne diseases, of which Listeria monocytogenes and Salmonella typhimurium are representative and notable pathogens. Thus, it's of great importance to achieve the effective detection of these pathogens. However, the most common detection methods (culture-based technique, Polymerase Chain Reaction and immunological methods) have disadvantages that cannot be ignored, such as time-consuming, laborious, complex sample preparation process, and the possibility of cross-reaction. Hence, it is essential to develop a facile detection method for the pathogens with high sensitivity and specificity to avoid the above-mentioned disadvantages.

RESULTS

We report a label-free visual platform for the simultaneous capture and detection of Listeria monocytogenes and Salmonella typhimurium. For the first time, we have prepared polydimethylsiloxane-Chromotrope 2R membrane which serves as the substrate for bacterial capture and enrichment through the formation of specific recognition sites. The positively charged Pt-covalent organic framework combines with the pathogens through surface charge interaction, thereby the label-free sandwich platform is formed. Remarkable peroxidase activity of Pt-covalent organic framework converts the conversion of bacterial quantity into amplified color signal by catalyzing 3,3',5,5'-Tetramethylbenzidine to oxidized 3,3',5,5'-Tetramethylbenzidine. The platform demonstrates the capability to identify two representative food-borne pathogens within a time frame of 100 min, exhibiting high sensitivity and excellent specificity without the interference from non-target bacteria. The limit of detection of the visual platform toward Listeria monocytogenes and Salmonella typhimurium was 1.61 CFU mL-1 and 1.31 CFU mL-1, respectively. And the limit of quantification toward Listeria monocytogenes and Salmonella typhimurium was 4.94 CFU mL-1 and 2.47 CFU mL-1, respectively. The relative standard derivations of the visual platform for both bacteria were lower than 4.9 %. Furthermore, our proposed platform has obtained reliable and satisfactory results on analyzing diverse food samples.

SIGNIFICANCE

This research expands the application of a label-free platform combined with unlabeled nanocomponents in the rapid isolation and detection of diverse of food-borne pathogens. The platform possesses the advantages of simple operation and real-time monitoring, without complicated sample pretreatment process. The whole detection process can realize the simultaneous monitoring of Listeria monocytogenes and Salmonella typhimurium within 100 min. Furthermore, it is also of reference significance for the detection of other common pathogens.

An injectable chitosan-based hydrogel incorporating carbon dots with dual enzyme-mimic activities for synergistically treatment of bacteria infected wounds

Bacterial infections pose a serious threat to human health, and the emergence of superbugs and the growing antibiotic resistance phenomenon have made the development of novel antimicrobial products. In this paper, an ultrasmall Cu, N co-doped carbon dots (CDs-Cu-N) with excellent peroxidase mimic activity and enhanced catalase mimic activity was successfully prepared and anchored to an injectable chitosan (CS)-based hybrid hydrogel. As expected, the CDs-Cu-N-H2O2-CS hybrid hydrogel maintains the excellent enzyme-mimicking properties of CDs-Cu-N and shows superior antibacterial property, which has been proven to effectively promote the healing of S. aureus-infected wounds with good biocompatibility. Benefitting from the dual-enzyme-mimic activity of CDs-Cu-N, the hybrid hydrogel not only can catalyze the generation of highly toxic ROS from low concentration of H2O2 to inhibit the bacterial infections, but also can significantly promote the wound tissue repair and regeneration by improving the anoxic microenvironment and promoting neovascularization. In addition, this hybrid hydrogel also possessed excellent injectability and moldability. It can adapt to various the irregular shapes of acute wounds, maintaining a moist and safe microenvironment while prolonging the action time of nanozyme on wounds, thus promoting wound healing. This injectable hybrid hydrogel shows great potential applications in the field of wound infection management.

Bimetal loaded graphitic carbon nitride with synergistic enhanced peroxidase-like activity for colorimetric detection of p-phenylenediamine

In recent years, great progress has been made on the study of nanozymes with enzyme-like properties. Here, bimetallic Fe and Ni nanoclusters were anchored on the nanosheets of nitrogen-rich layered graphitic carbon nitride by one-step pyrolysis at high temperature (Fe/Ni-CN). The loading content of Fe and Ni on Fe/Ni-CN is as high as 8.0%, and Fe/Ni-CN has a high specific surface area of 121.86 m2 g-1. The Fe/Ni-CN can effectively oxidize 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H2O2, and exhibits efficient peroxidase-like activity, leading to a 17.2-fold increase compared to pure graphitic carbon nitride (CN). Similar to the natural horseradish peroxidase (HRP), the Fe/Ni-CN nanozyme follows catalytic kinetics. The Michaelis-Menten constant (Km) value of the Fe/Ni-CN nanozyme for TMB is about 8.3-fold lower than that for HRP, which means that the Fe/Ni-CN nanozyme has better affinity for TMB. In addition, the catalytic mechanism was investigated by combination of free radical quenching experiments and density-functional theory (DFT) calculations. The results show that the high peroxidase-like activity is due to the easy adsorption of H2O2 after bimetal loading, which is conducive to the production of hydroxyl radicals. Based on the extraordinary peroxidase-like activity, the colorimetric detection of p-phenylenediamine (PPD) was constructed with a wide linear range of 0.2-30 μM and a low detection limit of 0.02 μM. The sensor system has been successfully applied to the detection of residual PPD in real dyed hair samples. The results show that the colorimetric method is sensitive, highly selective and accurate. This study provides a new idea for the efficient enhancement of nanozyme activity and effective detection of PPD by a bimetallic synergistic strategy.

Smartphone-assisted array discrimination of sulfur-containing compounds and colorimetric-fluorescence dual-mode sensor for detection of 1,4-benzenedithiol based on peroxidase-like nanozyme g-C3N4@Cu, N-CDs

Present work reported a novel nanozyme g-C3N4@Cu, N-CDs with excellent peroxidase-like activity obtained by loading Cu and N co-doped carbon dots on g-C3N4 (graphitic carbon nitride). g-C3N4@Cu, N-CDs can catalyze H2O2 to generate hydroxyl radical •OH, which oxidizes o-phenylenediamine to 2,3-diaminophenazine, which emits orange fluorescence under ultraviolet light irradiation. The experimental results confirmed that 1,4-benzenedithiol (BDT) could inhibit the peroxidase-like activity of g-C3N4@Cu, N-CDs. Based the principle above, a colorimetric-fluorescence dual-mode sensor for rapidly sensing of BDT was creatively constructed with assisting of a smartphone. The sensor showed excellent linearity over ranges of 0.75-132 μM and 0.33-60.0 μM with detection limits of 0.32 μM and 0.25 μM for colorimetric and fluorescence detection, respectively. Moreover, a smartphone-assisted colorimetric array sensor was constructed to distinguish six sulfur-containing compounds according to the difference in the degree of inhibition of nanozyme activity by different sulfur-containing compounds. The array sensor could distinguish sulfur-containing compounds at low concentration as low as 0.4 μM. The results validated that the designed sensor was a convenient and fast platform, which could be utilized as a reliably portable tool for the efficient and accurate detection of BDT and the discrimination of multiple sulfur compounds in real water samples.

Single-atom nanozymes shines diagnostics of gastrointestinal diseases

Various clinical symptoms of digestive system, such as infectious, inflammatory, and malignant disorders, have a profound impact on the quality of life and overall health of patients. Therefore, the chase for more potent medicines is both highly significant and urgent. Nanozymes, a novel class of nanomaterials, amalgamate the biological properties of nanomaterials with the catalytic activity of enzymes, and have been engineered for various biomedical applications, including complex gastrointestinal diseases (GI). Particularly, because of their distinctive metal coordination structure and ability to maximize atom use efficiency, single-atom nanozymes (SAzymes) with atomically scattered metal centers are becoming a more viable substitute for natural enzymes. Traditional nanozyme design strategies are no longer able to meet the current requirements for efficient and diverse SAzymes design due to the diversification and complexity of preparation processes. As a result, this review emphasizes the design concept and the synthesis strategy of SAzymes, and corresponding bioenzyme-like activities, such as superoxide dismutase (SOD), peroxidase (POD), oxidase (OXD), catalase (CAT), and glutathione peroxidase (GPx). Then the various application of SAzymes in GI illnesses are summarized, which should encourage further research into nanozymes to achieve better application characteristics.

Enhanced the intrinsic oxidase-like activity of chiral carbon dots via manganese doping for selective catalytic oxidation

It is highly desirable to design and construct chemical catalysts with high activity and specificity as the alternatives of natural enzymes for industrial application. Chiral carbon dots (CDs), possessing both the intrinsic enzyme-like activity and specific recognition ability, are one of good candidates for enzyme-like catalysts. However, their catalytic activity is far from that of natural enzymes and needs to be enhanced. In this work, the modulation of the chiral structure and catalytic activity of chiral CDs with intrinsic oxidase-like activity was implemented by manganese (Mn) doping. Under the light condition, chiral CDs (l-Ser-CDs and d-Ser-CDs) derived from chiral serine (Ser) show weak catalytic activity and low selectivity toward the oxidation of L type of dopamine (l-DOPA), whereas the Mn functionalized chiral CDs (l-Mn-CDs or d-Mn-CDs) exhibit 6.9 times higher in catalytic activity and 2.9 times in selectivity ratio (SR) than Ser-CDs. Mn-CDs involve two-path catalytic process, in which the photogenerated electrons could reduce O2 to O2- as the active species and the holes would oxidize DOPA directly. Moreover, doping of Mn enables the CDs to generate more O2-. Besides, l-Mn-CDs have higher catalytic activity than that of d-Mn-CDs (+54.2 %), and the chiral Mn-CDs have stronger selective adsorption capacity towards chiral DOPA than Ser-CDs. Our work provides a new method for designing and preparing novel chiral artificial enzymes.

The Guidelines for the Design and Synthesis of Transition Metal Atom Doped Carbon Dots

Atoms doping is a practical approach to modulate the physicochemical properties of carbon dots (CDs) and thus has garnered increasing attention in recent years. Compared to non-metal atoms, transition metal atoms (TMAs) possess more unoccupied orbitals and larger atomic radii. TMAs doping can significantly alter the electronic structure of CDs and bestow them with new intrinsic characteristics. TMAs-doped CDs have exhibited widespread application potential as a new class of single-atom-based nanomaterials. However, challenges remain for the successful preparation and precise design of TMAs-doped CDs. The key to successfully preparing TMA-doped CDs lies in anchoring TMAs to the carbon precursors before the reaction. Herein, taking the formation mechanism of TMAs-doped CDs as a starting point, we systematically summarized the ligands employed for synthesizing TMAs-doped CDs and proposed the synthetic strategy involving multiple ligands. Additionally, we summarize the functional properties imparted to CDs by different TMA dopants to guide the design of TMA-doped CDs with different functional characteristics. Finally, we describe the bottlenecks TMAs-doped CDs face and provide an outlook on their future development.

Ultrabright Green-Emissive Nanodots for Precise Biological Visualization

Developing general methods to fabricate water-dispersible and biocompatible fluorescent probes will promote different biological visualization applications. Herein, we report a metal-facilitated method to fabricate ultrabright green-emissive nanodots via the one-step solvothermal treatment of rose bengal, ethanol, and various metal ions. These metal-doped nanodots show good water dispersity, ultrahigh photoluminescence quantum yields (PLQYs) (e.g., the PLQY of Fe-doped nanodots (FeNDs) was ∼97%), and low phototoxicity. Owing to the coordination effect of metal ions, the FeNDs realize glutathione detection with outstanding properties. Benefiting from the high endoplasmic reticulum (ER) affinity of the chloride group, the FeNDs can act as an ER tracker with long ER imaging capacity (FeNDs: >24 h; commercial ER tracker: ∼1 h) and superb photostability and can achieve tissue visualization in living Caenorhabditis elegans. The metal-doped nanodots represent a general nanodot preparation method and may shed new light on diverse biological visualization uses.

Highly-oxidizing Au@MnO2-X nanozymes mediated homogeneous electrochemical detection of organophosphorus independent of dissolved oxygen

Traditional oxidase-like (OXD) nanozymes rely primarily on O2-mediated superoxide anion (O2·-) process for catalytic oxidation and organophosphorus (Ops) detection. While during the actual detection process, the concentration of O2 is inconstant that can be easily changed with the external environment, distorting detection results. Herein, highly-oxidizing Au@MnO2-X nanozymes with core-shell nanostructure are designed which trigger substantial electron transfer from inner Au core to outer ultrathin MnO2-X layer. According to experimental and theoretical calculations, the core-shell nanostructure and ultrathin MnO2-X of Au@MnO2-X result in the large surface defects, high oxygen vacancies and MnIII ratios. The specially structured Au@MnO2-X nanozymes are therefore highly-oxidizing and the catalytic oxidation can be completed merely through electrons transferring instead of the O2-mediated O2·- process. Based on this, an oxygen independent and ultrasensitive nanozyme-based sensor is established using homogeneous electrochemistry (HEC), its Ops is detected at a LOD of 0.039 ng mL-1. Combined with the UV-vis spectrum of 3,3',5,5'-tetramethylbenzidine (TMB), the linear discriminant analysis of five Ops i.e., Ethion, Omethoate, Diazinon, Chlorpyrifos methyl and Dipterex has achieved superior discrimination results. Therefore, HEC based on strong oxidizing nanozymes provide a new avenue for the development of high-performance electrochemical sensors and demonstrate potential applicability to pesticide residue determination in real samples.