Dual Functions of Performance Improvement and Lead Leakage Mitigation of Perovskite Solar Cells Enabled by Phenylbenzimidazole Sulfonic Acid

Dual Interfacial Modifications by a Natural Organic Acid Enable High-Performance Perovskite Solar Cells with Lead Shielding

Effective interfacial modification of the perovskite layer is a feasible approach to improve the efficiency and stability of perovskite solar cells (PSCs). Herein, we introduce a dual interfacial modification approach utilizing a natural organic acid, citric acid (CA), to enhance both interfaces adjacent to the crucial perovskite layer within the PSC structure. First, a CA thin layer is deposited on the top of a SnO2 electron transport layer to mitigate the corrosive effects of alkaline impurities in SnO2 on the perovskite film and to control the crystal growth of the perovskite. Then, the perovskite film is post-treated with CA to adjust the surface condition and passivate the defects on the film surface; thus, the interface contact around perovskite is strengthened, thereby facilitating charge transfer at the interfaces. Besides, CA also provides an in situ suppression of lead leakage in case the perovskite film is destroyed, owing to the strong chelating interactions of carboxyl groups with Pb2+. The photovoltaic performance and stability of the final PSCs are significantly enhanced, with the power conversion efficiency (PCE) increasing from 21.02 to 24.20%. This optimization of the important interfaces adjacent to the perovskite layer through surface treatment with a natural organic acid offers a practical method for enhancing the performance and stability of environmentally friendly PSCs.

Robust Imidazole-Linked Covalent Organic Framework Enabling Crystallization Regulation and Bulk Defect Passivation for Highly Efficient and Stable Perovskite Solar Cells

The low crystallinity of the perovskite layers and many defects at grain boundaries within the bulk phase and at interfaces are considered huge barriers to the attainment of high performance and stability in perovskite solar cells (PSCs). Herein, a robust photoelectric imidazole-linked porphyrin-based covalent organic framework (PyPor-COF) is introduced to precisely control the perovskite crystallization process and effectively passivate defects at grain boundaries through a sequential deposition method. The 1D porous channels, abundant active sites, and high crystallization orientation of PyPor-COF offer advantages for regulating the crystallization of PbI2 and eliminating defects. Moreover, the intrinsic electronic characteristics of PyPor-COF endow a more closely matched energy level arrangement within the perovskite layer, which promotes charge transport and thereby suppresses the recombination of photogenerated carriers. The champion PSCs containing PyPor-COF achieved power conversion efficiencies of 24.10% (0.09 cm2) and 20.81% (1.0 cm2), respectively. The unpackaged optimized device is able to maintain its initial efficiency of 80.39% even after being exposed to air for 2000 h. The device also exhibits excellent heating stability and light stability. This work gives a new impetus to the development of highly efficient and stable PSCs via employing COFs.

Achievements, challenges, and future prospects for industrialization of perovskite solar cells

In just over a decade, certified single-junction perovskite solar cells (PSCs) boast an impressive power conversion efficiency (PCE) of 26.1%. Such outstanding performance makes it highly viable for further development. Here, we have meticulously outlined challenges that arose during the industrialization of PSCs and proposed their corresponding solutions based on extensive research. We discussed the main challenges in this field including technological limitations, multi-scenario applications, sustainable development, etc. Mature photovoltaic solutions provide the perovskite community with invaluable insights for overcoming the challenges of industrialization. In the upcoming stages of PSCs advancement, it has become evident that addressing the challenges concerning long-term stability and sustainability is paramount. In this manner, we can facilitate a more effective integration of PSCs into our daily lives.

Organic Passivation-Enhanced Ferroelectricity in Perovskite Oxide Films

Perovskite oxides and organic-inorganic halide perovskite materials, with numerous fascinating features, have been subjected to extensive studies. Most of the properties of perovskite materials are dependence on their ferroelectricity that denoted by remanent polarization (Pr). Thus, the increase of Pr in perovskite films is mainly an effort in material physics. At present, commonplace improvement schemes, i.e., controlling material crystallinity, and post-annealing by using a high-temperature process, are normally used. However, a simpler and temporal strategy for Pr improvement is always unavailable to perovskite material researchers. In this study, an organic coating layer, low-temperature, and vacuum-free strategy is proposed to improve the Pr, directly increasing the Pr from 36 to 56 µC cm-2. Further study finds that the increased Pr originates from the suppression of the oxygen defects and Ti defects. This organic coating layer strategy for passivating the defects may open a new way for the preparation of higher-performance and cost-effective perovskite products, further improving its prospective for application in the electron devices field.

Crystallization Regulation and Lead Leakage Prevention Simultaneously for High-Performance CsPbI2Br Perovskite Solar Cells

All-inorganic CsPbI2Br perovskite is striking as a result of the reasonable band gap and thermal stability. However, the notorious air instability, unsatisfactory conversion efficiencies, and toxic water-soluble Pb2+ ions have greatly limited the further development of CsPbI2Br-based devices. Herein, a facile strategy is developed to prepare efficient and air-stable CsPbI2Br-based perovskite solar cells (PSCs) with in situ lead leakage protection. With the introduction of 2,2'-dihydroxy-4,4'-dimethoxy-5,5'-disulfobenzophenone disodium salt (BP-9) into the CsPbI2Br precursor solution, the crystallization of perovskite can be regulated at a reduced trap density, the uncoordinated Pb2+ ions and electron-rich defects in the structure can be passivated to suppress non-radiative recombination, and the energy level arrangement can be optimized to improve charge carrier transport. Consequently, the optimized PSC achieved a championship efficiency of 17.11%, accompanied by negligible J-V hysteresis and remarkably improved air stability. More importantly, the strong chelation of BP-9 with water-soluble Pb2+ ions minimizes the leakage of toxic lead in the perovskite structure.

Elucidating Charge Carrier Dynamics in Perovskite-Based Tandem Solar Cells

Recently, multijunction tandem solar cells (TSCs) have presented high power conversion efficiency and revealed their immense potential in photovoltaic evolution. It is demonstrated that multiple light absorbers with various bandgap energies overcome the Shockley-Queisser limit of single-junction solar cells by absorbing the wide-range wavelength photons. Here, the main key challenges are reviewed, especially the charge carrier dynamics in perovskite-based 2-terminal (2-T) TSCs in terms of current matching, and how to manage these issues from a vantage point of characterization. To do this, the effect of recombination layers, optical and fabrication hurdles, and the impact of wide bandgap perovskite solar cells are discussed extensively. Afterward, this review focuses on various optoelectronics, spectroscopic, and theoretical (optical simulation) characterizations to figure out those issues, especially current-matching issues faced by the photovoltaic society. This review comprehensively provides deep insights into the relationship between the current-matching problems and the photovoltaic performance of TSCs through a variety of perspectives. Consequently, it is believed that this review is essential to address the main problems of 2-T TSCs, and the suggestions to elucidate the charge carrier dynamics and its characterization may pave the way to overcome such obstacles to further improve the development of 2-T TSCs in relation to the current-matching problems.

Synergistic Passivation With Phenylpropylammonium Bromide for Efficient Inverted Perovskite Solar Cells

Inverted perovskite solar cells (PSCs) are a promising technology for commercialization due to their reliable operation and scalable fabrication. However, in inverted PSCs, depositing a high-quality perovskite layer comparable to those realized in normal structures still presents some challenges. Defects at grain boundaries and interfaces between the active layer and carrier extraction layer seriously hinder the power conversion efficiency (PCE) and stability of these cells. In this work, it is shown that synergistic bulk doping and surface treatment of triple-cation mixed-halide perovskites with phenylpropylammonium bromine (PPABr) can improve the efficiency and stability of inverted PSCs. The PPABr ligand is effective in eliminating halide vacancy defects and uncoordinated Pb2+ ions at both grain boundaries and interfaces. In addition, a 2D Ruddlesden-Popper (2D-RP) perovskite capping layer is formed on the surface of 3D perovskite by using PPABr post-treatment. This 2D-RP perovskite capping layer possesses a concentrated phase distribution ≈n = 2. This capping layer not only reduces interfacial non-radiative recombination loss and improves carrier extraction ability but also promotes stability and efficiency. As a result, the inverted PSCs achieve a champion PCE of over 23%, with an open-circuit voltage as high as 1.15 V and a fill factor of over 83%.

Synergistic Defect Passivation and Crystallization Modulation in Efficient Perovskite Solar Cells: The Case of Multifunctional 2-Anisidine-4-Sulfonic Acid

With the continuous development of the performance of perovskite solar cells, the high-density defects on the perovskite film surface and grain boundaries as well as undesired perovskite crystallization are increasingly emerging as challenges to their commercial application. Herein, a dye intermediate 2-anisidine-4-sulfonic acid (2A4SA), containing sulfonic acid group (SO3-), amino group (-NH2), methoxy group (CH3O-), and benzene ring, which exhibit a synergistic effect in comprehensive defect passivation and crystallization modulation, is incorporated. Detailed investigations show that the SO3- of 2A4SA with high electronegativity firmly chelates with uncoordinated lead ions through the coordination interaction, while the -NH2 and the CH3O- of 2A4SA separately immobilize iodide ions and organic cations in the perovskite lattice through hydrogen bonds, enabling substantially decreased nonradiative recombination and trap state density. Meanwhile, 2A4SA molecules attached to the surface of perovskite nuclei can delay crystallization kinetics and promote preferred vertical growth orientation, thereby attaining the high-crystallinity and large-size-grain perovskite films. Consequently, the 2A4SA-doped device with the structure ITO/SnO2/Cs0.15FA0.75MA0.10PbI3 (2A4SA)/Spiro-OMeTAD/Ag presents a splendid power conversion efficiency (PCE) of 23.06% accompanied by increased open-circuit voltage (1.15 V) and fill factor (82.17%). Furthermore, the optimized film and device demonstrate enhanced long-term stability. The unencapsulated optimized device retains ≈80% of the original PCE after 1000 h upon exposure to ambient atmosphere (20-50% RH), whereas the control group is only 56.8%.

Homogeneous voltammetric sensing strategy for lead ions based on aptamer gated methylthionine chloride@UiO-66-NH2 framework as smart target-stimulated responsive nanomaterial

Herein an innovative electrochemical method is proposed for the determination of lead ions (Pb²⁺) based on a homogeneous voltammetric (HVC) sensing strategy using an aptamer gated methylthionine chloride@UiO-66-NH₂ framework as a smart target-stimulated responsive material. The proposed HVC sensor exhibits excellent sensing performance: ultralow detection limit (0.166 pM) and wide linearity (5.0 pM-500.0 nM), simultaneously, it avoids electrodeposition processes and it is simple to modify the electrode compared to previous electrochemical methods for Pb²⁺ detection. Thus our method shows great potential in the highly efficient detection of Pb²⁺ and other heavy metal ions by simply altering the related specific aptamer.

Multifunctional anthraquinone-sulfonic potassium salts passivate the buried interface for efficient and stable planar perovskite solar cells

SnO₂-based planar perovskite solar cells (PSCs) are considered as potential photovoltaic candidates due to their simple structures and cost-effective preparation processes. However, the extensive defects accumulated at the buried interface between perovskite and SnO₂ greatly hinder the further improvement of PSC efficiency and stability. Herein, the potassium salt of anthraquinone-1,8-disulfonate (ASPS) is used as a novel multifunctional interfacial modifier to improve the carrier transport performance at the buried interface and optimize the quality of the upper perovskite light absorber layer (PVK) in PSCs. Owing to the synergistic effect of sulfonic acid groups, carbonyl groups and potassium ions in ASPS, the accumulated defects at the buried interface are passivated, the energy level arrangement of the interface is optimized, and the crystalline quality and optoelectronic properties of the PVK films are improved. As a result, the power conversion efficiency (PCE) improved significantly from 21.36% for the controlled device to 23.96% for the ASPS-modified device. Furthermore, the unencapsulated ASPS-modified device also exhibited better storage stability and thermal stability than the controlled device.

Multifunctional Chemical Linker in Buried Interface for Stable and Efficient Planar Perovskite Solar Cells

The buried interface between perovskite light absorbing layer (PVK) and electron transport layer (ETL) plays an utmost important role for further improving the efficiency and stability of planar perovskite solar...