Probing the structure of a putative intermediate in homologous recombination: the third strand in the parallel DNA triplex is in contact with the major groove of the duplex

Modeling the Homologous Recombination Process: Methods, Successes and Challenges

Homologous recombination (HR) is a fundamental process common to all species. HR aims to faithfully repair DNA double strand breaks. HR involves the formation of nucleoprotein filaments on DNA single strands (ssDNA) resected from the break. The nucleoprotein filaments search for homologous regions in the genome and promote strand exchange with the ssDNA homologous region in an unbroken copy of the genome. HR has been the object of intensive studies for decades. Because multi-scale dynamics is a fundamental aspect of this process, studying HR is highly challenging, both experimentally and using computational approaches. Nevertheless, knowledge has built up over the years and has recently progressed at an accelerated pace, borne by increasingly focused investigations using new techniques such as single molecule approaches. Linking this knowledge to the atomic structure of the nucleoprotein filament systems and the succession of unstable, transient intermediate steps that takes place during the HR process remains a challenge; modeling retains a very strong role in bridging the gap between structures that are stable enough to be observed and in exploring transition paths between these structures. However, working on ever-changing long filament systems submitted to kinetic processes is full of pitfalls. This review presents the modeling tools that are used in such studies, their possibilities and limitations, and reviews the advances in the knowledge of the HR process that have been obtained through modeling. Notably, we will emphasize how cooperative behavior in the HR nucleoprotein filament enables modeling to produce reliable information.

How Enzymes, Proteins, and Antibodies Recognize Extended DNAs; General Regularities

X-ray analysis cannot provide quantitative estimates of the relative contribution of non-specific, specific, strong, and weak contacts of extended DNA molecules to their total affinity for enzymes and proteins. The interaction of different enzymes and proteins with long DNA and RNA at the quantitative molecular level can be successfully analyzed using the method of the stepwise increase in ligand complexity (SILC). The present review summarizes the data on stepwise increase in ligand complexity (SILC) analysis of nucleic acid recognition by various enzymes-replication, restriction, integration, topoisomerization, six different repair enzymes (uracil DNA glycosylase, Fpg protein from Escherichia coli, human 8-oxoguanine-DNA glycosylase, human apurinic/apyrimidinic endonuclease, RecA protein, and DNA-ligase), and five DNA-recognizing proteins (RNA helicase, human lactoferrin, alfa-lactalbumin, human blood albumin, and IgGs against DNA). The relative contributions of structural elements of DNA fragments "covered" by globules of enzymes and proteins to the total affinity of DNA have been evaluated. Thermodynamic and catalytic factors providing discrimination of unspecific and specific DNAs by these enzymes on the stages of primary complex formation following changes in enzymes and DNAs or RNAs conformations and direct processing of the catalysis of the reactions were found. General regularities of recognition of nucleic acid by DNA-dependent enzymes, proteins, and antibodies were established.

Structural, thermodynamic, and kinetic basis for the activities of some nucleic acid repair enzymes

X-ray structural analysis provides no quantitative estimate of the relative contribution of specific and nonspecific or strong and weak interactions to the total affinity of enzymes for nucleic acids. We have shown that the interaction between enzymes and long nucleic acids at the molecular level can be successfully analyzed by the method of stepwise increase in ligand complexity (SILC). In the present review we summarize our studies of human uracil DNA glycosylase and apurinic/apyrimidinic endonuclease, E. coli 8-oxoguanine DNA glycosylase and RecA protein using the SILC approach. The relative contribution of structural (X-ray analysis data), thermodynamic, and catalytic factors to the discrimination of specific and nonspecific DNA by these enzymes at the stages of complex formation, the following changes in DNA and enzyme conformations and especially the catalysis of the reactions is discussed.

Main factors providing specificity of repair enzymes

Specific and nonspecific DNA complex formation with human uracil-DNA glycosylase, 8-oxoguanine-DNA glycosylase, and apurine/apyrimidine endonuclease, as well as with E. coli 8-oxoguanine-DNA glycosylase and RecA protein was analyzed using the method of stepwise increase in DNA-ligand complexity. It is shown that high affinity of these enzymes to any DNA (10(-4)-10(-8) M) is provided by a large number of weak additive contacts mainly with DNA internucleoside phosphate groups and in a less degree with bases of nucleotide links "covered" by protein globules. Enzyme interactions with specific DNA links are comparable in efficiency with weak unspecific contacts and provide only for one-two orders of affinity (10(-1)-10(-2) M), but these contacts are extremely important at stages of DNA and enzyme structural adaptation and catalysis proper. Only in the case of specific DNA individual for each enzyme alterations in DNA structure provide for efficient adjustment of reacting enzyme atoms and DNA orbitals with accuracy up to 10-15° and, as a result, for high reaction rate. Upon transition from nonspecific to specific DNA, reaction rate (k(cat)) increases by 4-8 orders of magnitude. Thus, stages of DNA and enzyme structural adaptation as well as catalysis proper are the basis of specificity of repair enzymes.

Folding pathways of human telomeric type-1 and type-2 G-quadruplex structures

We have investigated new folding pathways of human telomeric type-1 and type-2 G-quadruplex conformations via intermediate hairpin and triplex structures. The stabilization energies calculated by ab initio methods evidenced the formation of a hairpin structure with Hoogsteen GG base pairs. Further calculations revealed that the G-triplet is more stable than the hairpin conformation and equally stable when compared to the G-tetrad. This indicated the possibility of a triplex intermediate. The overall folding is facilitated by K(+) association in each step, as it decreases the electrostatic repulsion. The K(+) binding site was identified by molecular dynamics simulations. We then focused on the syn/anti arrangement and found that the anti conformation of deoxyguanosine is more stable than the syn conformation, which indicated that folding would increase the number of anti conformations. The K(+) binding to a hairpin near the second lateral TTA loop was found to be preferable, considering entropic effects. Stacking of G-tetrads with the same conformation (anti/anti or syn/syn) is more stable than mixed stacking (anti/syn and vice versa). These results suggest the formation of type-1 and type-2 G-quadruplex structures with the possibility of hairpin and triplex intermediates.

Heteropolymeric triplex-based genomic assay to detect pathogens or single-nucleotide polymorphisms in human genomic samples

Human genomic samples are complex and are considered difficult to assay directly without denaturation or PCR amplification. We report the use of a base-specific heteropolymeric triplex, formed by native duplex genomic target and an oligonucleotide third strand probe, to assay for low copy pathogen genomes present in a sample also containing human genomic duplex DNA, or to assay human genomic duplex DNA for Single Nucleotide Polymorphisms (SNP), without PCR amplification. Wild-type and mutant probes are used to identify triplexes containing FVL G1691A, MTHFR C677T and CFTR mutations. The specific triplex structure forms rapidly at room temperature in solution and may be detected without a separation step. YOYO-1, a fluorescent bis-intercalator, promotes and signals the formation of the specific triplex. Genomic duplexes may be assayed homogeneously with single base pair resolution. The specific triple-stranded structures of the assay may approximate homologous recombination intermediates, which various models suggest may form in either the major or minor groove of the duplex. The bases of the stable duplex target are rendered specifically reactive to the bases of the probe because of the activity of intercalated YOYO-1, which is known to decondense duplex locally 1.3 fold. This may approximate the local decondensation effected by recombination proteins such as RecA in vivo. Our assay, while involving triplex formation, is sui generis, as it is not homopurine sequence-dependent, as are “canonical triplexes”. Rather, the base pair-specific heteropolymeric triplex of the assay is conformation-dependent. The highly sensitive diagnostic assay we present allows for the direct detection of base sequence in genomic duplex samples, including those containing human genomic duplex DNA, thereby bypassing the inherent problems and cost associated with conventional PCR based diagnostic assays.

Recombination R-triplex: H-bonds contribution to stability as revealed with minor base substitutions for adenine

Several cellular processes involve alignment of three nucleic acids strands, in which the third strand (DNA or RNA) is identical and in a parallel orientation to one of the DNA duplex strands. Earlier, using 2-aminopurine as a fluorescent reporter base, we demonstrated that a self-folding oligonucleotide forms a recombination-like structure consistent with the R-triplex. Here, we extended this approach, placing the reporter 2-aminopurine either in the 5'- or 3'-strand. We obtained direct evidence that the 3'-strand forms a stable duplex with the complementary central strand, while the 5'-strand participates in non-Watson-Crick interactions. Substituting 2,6-diaminopurine or 7-deazaadenine for adenine, we tested and confirmed the proposed hydrogen bonding scheme of the A*(T.A) R-type triplet. The adenine substitutions expected to provide additional H-bonds led to triplex structures with increased stability, whereas the substitutions consistent with a decrease in the number of H-bonds destabilized the triplex. The triplex formation enthalpies and free energies exhibited linear dependences on the number of H-bonds predicted from the A*(T.A) triplet scheme. The enthalpy of the 10 nt long intramolecular triplex of -100 kJ x mol(-1) demonstrates that the R-triplex is relatively unstable and thus an ideal candidate for a transient intermediate in homologous recombination, t-loop formation at the mammalian telomere ends, and short RNA invasion into a duplex. On the other hand, the impact of a single H-bond, 18 kJ x mol(-1), is high compared with the overall triplex formation enthalpy. The observed energy advantage of a 'correct' base in the third strand opposite the Watson-Crick base pair may be a powerful mechanism for securing selectivity of recognition between the single strand and the duplex.

Formation of nucleoprotein RecA filament on single-stranded DNA. Analysis by stepwise increase in ligand complexity

RecA protein plays a pivotal role in homologous recombination in Escherichia coli. RecA polymerizes on single-stranded (ss) DNA forming a nucleoprotein filament. Then double-stranded (ds) DNA is bound and searched for segments homologous to the ssDNA. Finally, homologous strands are exchanged, a new DNA duplex is formed, and ssDNA is displaced. We report a quantitative analysis of RecA interactions with ss d(pN)n of various structures and lengths using these oligonucleotides as inhibitors of RecA filamentation on d(pT)20. DNA recognition appears to be mediated by weak interactions between its structural elements and RecA monomers within a filament. Orthophosphate and dNMP are minimal inhibitors of RecA filamentation (I50 = 12-20 mM). An increase in homo-d(pN)2-40 length by one unit improves their affinity for RecA (f factor) approximately twofold through electrostatic contacts of RecA with internucleoside phosphate DNA moieties (f approximately = 1.56) and specific interactions with T or C bases (f approximately = 1.32); interactions with adenine bases are negligible. RecA affinity for d(pN)n containing normal or modified nucleobases depends on the nature of the base, features of the DNA structure. The affinity considerably increases if exocyclic hydrogen bond acceptor moieties are present in the bases. We analyze possible reasons underlying RecA preferences for DNA sequence and length and propose a model for recognition of ssDNA by RecA.

The bacterial RecA protein and the recombinational DNA repair of stalled replication forks

The primary function of bacterial recombination systems is the nonmutagenic repair of stalled or collapsed replication forks. The RecA protein plays a central role in these repair pathways, and its biochemistry must be considered in this context. RecA protein promotes DNA strand exchange, a reaction that contributes to fork regression and DNA end invasion steps. RecA protein activities, especially formation and disassembly of its filaments, affect many additional steps. So far, Escherichia coli RecA appears to be unique among its nearly ubiquitous family of homologous proteins in that it possesses a motorlike activity that can couple the branch movement in DNA strand exchange to ATP hydrolysis. RecA is also a multifunctional protein, serving in different biochemical roles for recombinational processes, SOS induction, and mutagenic lesion bypass. New biochemical and structural information highlights both the similarities and distinctions between RecA and its homologs. Increasingly, those differences can be rationalized in terms of biological function.

In vitro selection of DNA aptamers against the HIV-1 TAR RNA hairpin

In vitro selection was performed to identify DNA aptamers against the TAR RNA stem-loop structure of HIV-1. A counterselection step allowed the elimination of kissing complex-forming aptamers previously selected (Boiziau et al. J. Biol. Chem. 1999; 274:12730). This led to the emergence of oligonucleotides, most of which contained two consensus sequences, one targeted to the stem 3'-strand (5'-CCCTAGTTA) and the other complementary to the TAR apical loop (5'-CTCCC). The best aptamer could be shortened to a 19-mer oligonucleotide, characterized by a dissociation constant of 50 nM. A 16-mer oligonucleotide complementary to the TAR stem 3'-strand could also be derived from the identified aptamers, with an equal affinity (Kd = 50 nM). Experiments performed to elucidate the interaction between TAR and the aptamers (UV melting measures, enzymatic and chemical footprints) demonstrated that the TAR stem 5'-strand was not simply displaced as a result of the complex formation but unexpectedly remained associated on contact with the antisense oligonucleotide. We suggest that a multistranded structure could be formed.

Base composition at mtDNA boundaries suggests a DNA triple helix model for human mitochondrial DNA large-scale rearrangements

Different mechanisms have been proposed to account for mitochondrial DNA (mtDNA) instability based on the presence of short homologous sequences (direct repeats, DR) at the potential boundaries of mtDNA rearrangements. Among them, slippage-mispairing of the replication complex during the asymmetric replication cycle of the mammalian mitochondrial DNA has been proposed to account for the preferential localization of deletions. This mechanism involves a transfer of the replication complex from the first neo-synthesized heavy (H) strand of the DR1, to the DR2, thus bypassing the intervening sequence and producing a deleted molecule. Nevertheless, the nature of the bonds between the DNA strands remains unknown as the forward sequence of DR2, beyond the replication complex, stays double-stranded. Here, we have analyzed the base composition of the DR at the boundaries of mtDNA deletions and duplications and found a skewed pyrimidine content of about 75% in the light-strand DNA template. This suggests the possible building of a DNA triple helix between the G-rich neo-synthesized DR1 and the base-paired homologous G.C-rich DR2. In vitro experiments with the purified human DNA polymerase gamma subunits enabled us to show that the third DNA strand may be used as a primer for DNA replication, using a template with the direct repeat forming a hairpin, with which the primer could initiate DNA replication. These data suggest a novel molecular basis for mitochondrial DNA rearrangements through the distributive nature of the DNA polymerase gamma, at the level of the direct repeats. A general model accounting for large-scale mitochondrial DNA deletion and duplication is proposed. These experiments extend to a DNA polymerase from an eucaryote source the use of a DNA triple helix strand as a primer, like other DNA polymerases from phage and bacterial origins.

DNA pairing and strand exchange by the Escherichia coli RecA and yeast Rad51 proteins without ATP hydrolysis: on the importance of not getting stuck

The bacterial RecA protein and the homologous Rad51 protein in eukaryotes both bind to single-stranded DNA (ssDNA), align it with a homologous duplex, and promote an extensive strand exchange between them. Both reactions have properties, including a tolerance of base analog substitutions that tend to eliminate major groove hydrogen bonding potential, that suggest a common molecular process underlies the DNA strand exchange promoted by RecA and Rad51. However, optimal conditions for the DNA pairing and DNA strand exchange reactions promoted by the RecA and Rad51 proteins in vitro are substantially different. When conditions are optimized independently for both proteins, RecA promotes DNA pairing reactions with short oligonucleotides at a faster rate than Rad51. For both proteins, conditions that improve DNA pairing can inhibit extensive DNA strand exchange reactions in the absence of ATP hydrolysis. Extensive strand exchange requires a spooling of duplex DNA into a recombinase-ssDNA complex, a process that can be halted by any interaction elsewhere on the same duplex that restricts free rotation of the duplex and/or complex, I.e. the reaction can get stuck. Optimization of an extensive DNA strand exchange without ATP hydrolysis requires conditions that decrease nonproductive interactions of recombinase-ssDNA complexes with the duplex DNA substrate.

Initiation of DNA replication by DNA polymerases from primers forming a triple helix

Despite extensive studies on oligonucleotide-forming triple helices, which were discovered in 1957, their possible relevance in the initiation of DNA replication remains unknown. Using sequences forming triple helices, we have developed a DNA polymerisation assay by using hairpin DNA templates with a 3' dideoxynucleotide end and an unpaired 5'-end extension to be replicated. The T7 DNA polymerase successfully elongated nucleotides to the expected size of the template from the primers forming triple helices composed of 9-14 deoxyguanosine-rich residues. The triple helix-forming primer required for this reaction has to be oriented parallel to the homologous sequence of the hairpin DNA template. Substitution of the deoxyguanosine residues by N7 deazadeoxyguanosines in the hairpin of the template prevented primer elongation, suggesting that the formation of a triple helix is a prerequisite for primer elongation. Furthermore, DNA sequencing could be achieved with the hairpin template through partial elongation of the third DNA strand forming primer. The T4 DNA polymerase and the Klenow fragment of DNA polymerase I provided similar DNA elongation to the T7 polymerase-thioredoxin complex. On the basis of published crystallographic data, we show that the third DNA strand primer fits within the catalytic centre of the T7 DNA polymerase, thus underlying this new property of several DNA polymerases which may be relevant to genome rearrangements and to the evolution of the genetic apparatus, namely the DNA structure and replication processes.

Protein-free parallel triple-stranded DNA complex formation

A 14 nt DNA sequence 5'-AGAATGTGGCAAAG-3' from the zinc finger repeat of the human KRAB zinc finger protein gene ZNF91 bearing the intercalator 2-methoxy,6-chloro,9-amino acridine (Acr) attached to the sugar-phosphate backbone in various positions has been shown to form a specific triple helix (triplex) with a 16 bp hairpin (intramolecular) or a two-stranded (intermolecular) duplex having the identical sequence in the same (parallel) orientation. Intramolecular targets with the identical sequence in the antiparallel orientation and a non-specific target sequence were tested as controls. Apparent binding constants for formation of the triplex were determined by quantitating electrophoretic band shifts. Binding of the single-stranded oligonucleotide probe sequence to the target led to an increase in the fluorescence anisotropy of acridine. The parallel orientation of the two identical sequence segments was confirmed by measurement of fluorescence resonance energy transfer between the acridine on the 5'-end of the probe strand as donor and BODIPY-Texas Red on the 3'-amino group of either strand of the target duplex as acceptor. There was full protection from OsO(4)-bipyridine modification of thymines in the probe strand of the triplex, in accordance with the presumed triplex formation, which excluded displacement of the homologous duplex strand by the probe-intercalator conjugate. The implications of these results for the existence of protein-independent parallel triplexes are discussed.

Comb-type cationic copolymer expedites DNA strand exchange while stabilizing DNA duplex

The accelerating effect of cationic substances on the DNA strand exchange reaction between a 20 bp DNA duplex and its complementary single strand was studied. A polycationic comb-type copolymer, that consists of a poly(L-lysine) backbone and a dextran graft chain (PLL-g-Dex) and known to stabilize triplex DNA, expedites the strand exchange reaction under physiological relevant conditions. Electrostatically a small excess of the copolymer let to a 300-1500-fold increase in the DNA strand exchange while large excess of spermine or cetyltrimethylammonium bromide, a cationic detergent known to promote markedly hybridization of complementary DNA strands, shows only a slight effect. The efficacy of the copolymer was not affected by a 10 mM Mg2+ concentration. Notably the copolymer promotes the strand exchange reaction while it stabilizes double-stranded DNA. The stabilization of strand exchange intermediates consisting of the parent duplex and the single strand by the copolymer is believed to be responsible for the observed acceleration behavior.

Triple helix formation and the antigene strategy for sequence-specific control of gene expression

Specific gene expression involves the binding of natural ligands to the DNA base pairs. Among the compounds rationally designed for artificial regulation of gene expression, oligonucleotides can bind with a high specificity of recognition to the major groove of double helical DNA by forming Hoogsteen type bonds with purine bases of the Watson-Crick base pairs, resulting in triple helix formation. Although the potential target sequences were originally restricted to polypurine-polypyrimidine sequences, considerable efforts were devoted to the extension of the repertoire by rational conception of appropriate derivatives. Efficient tools based on triple helices were developed for various biochemical applications such as the development of highly specific artificial nucleases. The antigene strategy remains one of the most fascinating fields of triplex application to selectively control gene expression. Targeting of genomic sequences is now proved to be a valuable concept on a still limited number of studies; local mutagenesis is in this respect an interesting application of triplex-forming oligonucleotides on cell cultures. Oligonucleotide penetration and compartmentalization in cells, stability to intracellular nucleases, accessibility of the target sequences in the chromatin context, the residence time on the specific target are all limiting steps that require further optimization. The existence and the role of three-stranded DNA in vivo, its interaction with intracellular proteins is worth investigating, especially relative to the regulation of gene transcription, recombination and repair processes.

Recombinational DNA repair in bacteria and the RecA protein

In bacteria, the major function of homologous genetic recombination is recombinational DNA repair. This is not a process reserved only for rare double-strand breaks caused by ionizing radiation, nor is it limited to situations in which the SOS response has been induced. Recombinational DNA repair in bacteria is closely tied to the cellular replication systems, and it functions to repair damage at stalled replication forks, Studies with a variety of rec mutants, carried out under normal aerobic growth conditions, consistently suggest that at least 10-30% of all replication forks originating at the bacterial origin of replication are halted by DNA damage and must undergo recombinational DNA repair. The actual frequency may be much higher. Recombinational DNA repair is both the most complex and the least understood of bacterial DNA repair processes. When replication forks encounter a DNA lesion or strand break, repair is mediated by an adaptable set of pathways encompassing most of the enzymes involved in DNA metabolism. There are five separate enzymatic processes involved in these repair events: (1) The replication fork assembled at OriC stalls and/or collapses when encountering DNA damage. (2) Recombination enzymes provide a complementary strand for a lesion isolated in a single-strand gap, or reconstruct a branched DNA at the site of a double-strand break. (3) The phi X174-type primosome (or repair primosome) functions in the origin-independent reassembly of the replication fork. (4) The XerCD site-specific recombination system resolves the dimeric chromosomes that are the inevitable by-product of frequent recombination associated with recombinational DNA repair. (5) DNA excision repair and other repair systems eliminate lesions left behind in double-stranded DNA. The RecA protein plays a central role in the recombination phase of the process. Among its many activities, RecA protein is a motor protein, coupling the hydrolysis of ATP to the movement of DNA branches.

The integral divalent cation within the intermolecular purine*purine. pyrimidine structure: a variable determinant of the potential for and characteristics of the triple helical association

In vitro assembly of an intermolecular purine*purine.pyrimidine triple helix requires the presence of a divalent cation. The relationships between cation coordination and triplex assembly were investigated, and we have obtained new evidence for at least three functionally distinct potential modes of divalent cation coordination. (i) The positive influence of the divalent cation on the affinity of the third strand for its specific target correlates with affinity of the cation for coordination to phosphate. (ii) Once assembled, the integrity of the triple helical structure remains dependent upon its divalent cation component. A mode of heterocyclic coordination/chelation is favorable to triplex formation by decreasing the relative tendency for efflux of integral cations from within the triple helical structure. (iii) There is also a detrimental mode of base coordination through which a divalent cation may actively antagonize triplex assembly, even in the presence of other supportive divalent cations. These results demonstrate the considerable impact of the cationic component, and suggest ways in which the triple helical association might be positively or negatively modulated.

Modified oligonucleotides: synthesis and strategy for users

Synthetic oligonucleotide analogs have greatly aided our understanding of several biochemical processes. Efficient solid-phase and enzyme-assisted synthetic methods and the availability of modified base analogs have added to the utility of such oligonucleotides. In this review, we discuss the applications of synthetic oligonucleotides that contain backbone, base, and sugar modifications to investigate the mechanism and stereochemical aspects of biochemical reactions. We also discuss interference mapping of nucleic acid-protein interactions; spectroscopic analysis of biochemical reactions and nucleic acid structures; and nucleic acid cross-linking studies. The automation of oligonucleotide synthesis, the development of versatile phosphoramidite reagents, and efficient scale-up have expanded the application of modified oligonucleotides to diverse areas of fundamental and applied biological research. Numerous reports have covered oligonucleotides for which modifications have been made of the phosphodiester backbone, of the purine and pyrimidine heterocyclic bases, and of the sugar moiety; these modifications serve as structural and mechanistic probes. In this chapter, we review the range, scope, and practical utility of such chemically modified oligonucleotides. Because of space limitations, we discuss only those oligonucleotides that contain phosphate and phosphate analogs as internucleotidic linkages.

Base pair switching by interconversion of sugar puckers in DNA extended by proteins of RecA-family: a model for homology search in homologous genetic recombination

Escherichia coli RecA is a representative of proteins from the RecA family, which promote homologous pairing and strand exchange between double-stranded DNA and single-stranded DNA. These reactions are essential for homologous genetic recombination in various organisms. From NMR studies, we previously reported a novel deoxyribose-base stacking interaction between adjacent residues on the extended single-stranded DNA bound to RecA protein. In this study, we found that the same DNA structure was induced by the binding to Saccharomyces cerevisiae Rad51 protein, indicating that the unique DNA structure induced by the binding to RecA-homologs was conserved from prokaryotes to eukaryotes. On the basis of this structure, we have formulated the structure of duplex DNA within filaments formed by RecA protein and its homologs. Two types of molecular structures are presented. One is the duplex structure that has the N-type sugar pucker. Its helical pitch is approximately 95 A (18.6 bp/turn), corresponding to that of an active, or ATP-form of the RecA filament. The other is one that has the S-type sugar pucker. Its helical pitch is approximately 64 A (12.5 bp/turn), corresponding to that of an inactive, or ADP-form of the RecA filament. During this modeling, we found that the interconversion of sugar puckers between the N-type and the S-type rotates bases horizontally, while maintaining the deoxyribose-base stacking interaction. We propose that this base rotation enables base pair switching between double-stranded DNA and single-stranded DNA to take place, facilitating homologous pairing and strand exchange. A possible mechanism for strand exchange involving DNA rotation also is discussed.

Stability of triple-helical poly(dT)-poly(dA)-poly(dT) DNA with counterions

Structural conformation of triple-helical poly(dT)-poly(dA)-poly(dT) has been a very controversial issue recently. Earlier investigations, based on fiber diffraction data and molecular modeling, indicated an A-form conformation with C'3-endo sugar pucker. On the other hand, Raman, solution infrared spectral, and NMR studies show a B-form structure with C'2-endo sugars. In accordance with these experimental results, a theoretical model with B-form, C'2-endo sugars was proposed in 1993. In the present work we investigate the dynamics and stability of the two conformations within the effective local field approach applied to the normal mode calculations for the system. The presence of counterions was explicitly taken into account. Stable equilibrium positions for the counterions were calculated by analyzing the normal mode dynamics and free energy of the system. The breathing modes of the triple helix are shifted to higher frequencies over those of the double helix by 4-16 cm-1. The characteristic marker band for the B conformation at 835 cm-1 is split up into two marker bands at 830 and 835 cm-1. A detailed comparison of the normal modes and the free energies indicates that the B-form structure, with C'2-endo sugar pucker, is more stable than the A-form structure. The normal modes and the corresponding dipole moments are found to be in close agreement with recent spectroscopic findings.

Dissociation kinetics of RecA protein-three-stranded DNA complexes reveals a low fidelity of RecA-assisted recognition of homology

We determined that the incorporation of one mismatch into RecA mediated synaptic complexes between oligonucleotide single-stranded DNAs and target duplex DNAs destabilizes the complex by 0.8 to 1.9 kcal/mol. This finding supports our previous result, that RecA binding per se can significantly decrease the loss in free energy associated with mismatch incorporation even in the absence of ATP hydrolysis. We show that the specificity is mostly driven by the dissociation process. We found that the relative destabilization induced by different mismatches depends on their position. Thus, while there is a good correlation between the ranking order of mismatches at the 5' end of synaptic complexes and mismatches in heteroduplexes (D-loops), there is no correlation between the ranking order for mismatches at the 3' end and mismatches in various DNA structures. This difference between the 5' and 3' ends of synaptic complexes agrees well with the established 5' to 3' polarity of the strand exchange promoted by RecA protein. The lack of a correlation between mismatches at the 3' end of synaptic complexes and mismatches in D-loops suggests the intermediate is probably not a canonical protein-free D-loop.

Non-Watson-Crick base pairs modulate homologous alignments in RecA pairing reactions

Complementary pairing by RecA was examined in vitro to investigate how homology is deciphered from non-homology. Somewhere in a window of 40-50% sequence complementarity, RecA pairing begins to manifest the specificity of homology. Quantitation reveals a hierarchy among non-Watson-Crick mispairs: RecA reaction treats six out of 12 possible mispairs as good ones and three each of the remaining ones as moderate and bad pairs. The mispairs seem to function as independent pairing units free of sequence context effects. The overall strength of pairing is simply the sum of the constituent units. RecA mediated gradation of mispairs, free of sequence context effects, might offer a general thumb-rule for predicting the pairing strength of any alignment that carries multiple mispairs.

Sequence-specific ligation of DNA using RecA protein

A method is described that allows the sequence-specific ligation of DNA. The method is based on the ability of RecA protein from Escherichia coli to selectively pair oligonucleotides to their homologous sequences at the ends of fragments of duplex DNA. These three-stranded complexes were protected from the action of DNA polymerase. When treated with DNA polymerase, unprotected duplex fragments were converted to fragments with blunt ends, whereas protected fragments retained their cohesive ends. By using conditions that greatly favored ligation of cohesive ends, a second DNA fragment could be selectively ligated to a previously protected fragment of DNA. When this second DNA was a vector, selected fragments were preferentially cloned. The method had sufficient power to be used for the isolation of single-copy genes directly from yeast or human genomic DNA, and potentially could allow the isolation of much longer fragments with greater fidelity than obtainable by using PCR.

Sequence-independent recombination triple helices: a molecular dynamics study

Recent experimental studies have shown that the Rec-A mediated homologous recombination reaction involves a triple helical intermediate, in which the third strand base forms hydrogen bonds with both the bases in the major groove of the Watson-Crick duplex. Such 'mixed' hydrogen bonds allow formation of sequence independent triplexes. DNA triple helices involving 'mixed' hydrogen bonds have been studied, using model building, molecular mechanics (MM) and molecular dynamics (MD). Models were built for a triplex comprising all four possible triplets viz., G.C*C, C.G*G, A.T*T and T.A*A. To check the stability of all the 'mixed' hydrogen bonds in such triplexes and the conformational preferences of such triplex structures, MD studies were carried out starting from two structures with 30 degrees and 36 degrees twist between the basepairs. It was observed that though the two triplexes converged towards a similar structure, the various hydrogen bonds between the WC duplex and the third strand showed differential stabilities. An MD simulation with restrained hydrogen bonds showed that the resulting structure was stable and remained close to the starting structure. These studies help us in defining stable hydrogen bond geometries involving the third strand and the WC duplex. It was observed that in the C.G*G triplets the N7 atom of the second strand is always involved in hydrogen bonding. In the G.C*C triplets, either N3 or O2 in the third strand cytosine can interchangeably act as a hydrogen bond acceptor.

Oligonucleotide directed triple helix formation

Oligonucleotide directed triple helix formation allows the sequence-specific recognition of the major groove of double-helical DNA. Recently synthesized base analogs and backbones, such as N3'-->P5' phosphoramidates, allow stable triplexes to be formed under physiological conditions. However, it remains a challenge to design new oligomers that would extend the range of recognition sequences (which are still limited to oligopurine-rich tracts). Oligonucleotide directed triple helix formation could be used to control biological processes such as transcription and replication. Three-stranded structures formed during recombination processes have been further characterized.

Conformations of three-stranded DNA structures formed in presence and in absence of the RecA protein

Using FTIR and UV spectroscopies, we have studied the structures of three-stranded DNA complexes (TSC) having two identical strands, containing all four bases, in parallel orientation. In the first system, an intermolecular TSC is formed by the addition of the third strand (ssDNA) previously coated with RecA protein to an hairpin duplex (dsDNA), in presence of ATP gamma S. In the second one, the formation of an intramolecular triplex is forced by folding back twice on itself an oligonucleotide. The sequences of the three strands are the same in both systems. The formation of the RecA-TSC, which accommodates all four bases, is evidenced by gel retardation assay, and by its biphasic melting profile observed by UV spectroscopy. Using FTIR spectroscopy, N-type sugars are detected in this structure. This shows that in the RecA-TSC studied in presence of the protein, the nucleic acid part adopts an extended form, in agreement with the model proposed by Zhurkin et al. (1,2) and electron microscopy observations (3-6). In contrast, the RecA-free intramolecular triplex in a non extended form has S-type sugars.

RecA.oligonucleotide filaments bind in the minor groove of double-stranded DNA

Escherichia coli RecA protein, in the presence of ATP or its analog adenosine 5'-[gamma-thio]triphosphate, polymerizes on single-stranded DNA to form nucleoprotein filaments that can then bind to homologous sequences on duplex DNA. The three-stranded joint molecule formed as a result of this binding event is a key intermediate in general recombination. We have used affinity cleavage to examine this three-stranded joint by incorporating a single thymidine-EDTA.Fe (T*) into the oligonucleotide part of the filament. Our analysis of the cleavage patterns from the joint molecule reveals that the nucleoprotein filament binds in the minor groove of an extended Watson-Crick duplex.

Stabilization of parallel (recombinant) triplex with propidium iodide

Earlier we have shown that the oligonucleotide 5'-d(CATGCTAACT)-L-d(AGTTAGCATG)-L-d(CATGCTAACT)-3' [L = pO(CH2CH2O)3p] is able to fold back forming intramolecular RecA-independent triplex with identical strands oriented parallel to each other (parallel triplex) [A.K. Shchyolkina, E.N. Timofeev, O.F. Borisova, I.A. Il'icheva, E.E. Minyat, E.V. Khomyakova, V.L. Florentiev, FEBS Letters 339, 113-118 (1994) (1)]. In this study the propidium iodide (PI) was found to intercalate into the parallel triplex and increase its stability significantly (Tm increased from 21.4 up to 44.4 degrees C in 0.01 M Na phosphate buffer, pH 7, 0.1 M NaCl, when three PI molecules per triplex were bound). Fluorescence excitation and emission spectra, the quantum yield of fluorescence (q = 0.16) and the fluorescence lifetime of PI (tau = 24.5 ns at 3 degrees C) for the parallel triplex studied were shown to be similar to those for DNA. Scatchard binding plots indicated an anticooperative mode of PI binding to the parallel triplex. The association constant is close to that of PI binding to DNA. The fluorescence experiments revealed the maximum number of binding sites to be five PI molecules per one triplex molecule. Molecular mechanics calculation of possible structures for the parallel triplex-PI complex were performed.