Crystal structure of the 64M-2 antibody Fab fragment in complex with a DNA dT(6-4)T photoproduct formed by ultraviolet radiation

APE1-dependent base excision repair of DNA photodimers in human cells

UV irradiation induces "bulky" DNA photodimers such as (6-4)-photoproducts and cyclobutane pyrimidine dimers that are removed by nucleotide excision repair, a complex process defective in the sunlight-sensitive and cancer-prone disease xeroderma pigmentosum. Some bacteria and lower eukaryotes can also repair photodimers by enzymatically simpler mechanisms, but such pathways have not been reported in normal human cells. Here, we have identified such a mechanism. We show that normal human cells can employ a DNA base excision repair process involving NTH1, APE1, PARP1, XRCC1, and FEN1 to rapidly remove a subset of photodimers at early times following UVC irradiation. Loss of these proteins slows the early rate of repair of photodimers in normal cells, ablates their residual repair in xeroderma pigmentosum cells, and increases UVC sensitivity ∼2-fold. These data reveal that human cells can excise photodimers using a long-patch base excision repair process that functions additively but independently of nucleotide excision repair.

Structure and mechanism of pyrimidine-pyrimidone (6-4) photoproduct recognition by the Rad4/XPC nucleotide excision repair complex

Failure in repairing ultraviolet radiation-induced DNA damage can lead to mutations and cancer. Among UV-lesions, the pyrimidine–pyrimidone (6-4) photoproduct (6-4PP) is removed from the genome much faster than the cyclobutane pyrimidine dimer (CPD), owing to the more efficient recognition of 6-4PP by XPC-RAD23B, a key initiator of global-genome nucleotide excision repair (NER). Here, we report a crystal structure of a Rad4–Rad23 (yeast XPC-Rad23B ortholog) bound to 6-4PP-containing DNA and 4-μs molecular dynamics (MD) simulations examining the initial binding of Rad4 to 6-4PP or CPD. This first structure of Rad4/XPC bound to a physiological substrate with matched DNA sequence shows that Rad4 flips out both 6-4PP-containing nucleotide pairs, forming an ‘open’ conformation. The MD trajectories detail how Rad4/XPC initiates ‘opening’ 6-4PP: Rad4 initially engages BHD2 to bend/untwist DNA from the minor groove, leading to unstacking and extrusion of the 6-4PP:AA nucleotide pairs towards the major groove. The 5′ partner adenine first flips out and is captured by a BHD2/3 groove, while the 3′ adenine extrudes episodically, facilitating ensuing insertion of the BHD3 β-hairpin to open DNA as in the crystal structure. However, CPD resists such Rad4-induced structural distortions. Untwisting/bending from the minor groove may be a common way to interrogate DNA in NER.

Structural and biochemical basis of the formation of isoaspartate in the complementarity-determining region of antibody 64M-5 Fab

The formation of the isoaspartate (isoAsp) is one of spontaneous degradation processes of proteins, affecting their stability and activity. Here, we report for the first time the crystal structures of an antibody Fab that contains isoAsp in the complementarity-determining region (CDR), along with biochemical studies to detect isoAsp. By comparing the elution profiles of cation-exchange chromatography, it was clarified that the antibody 64M-5 Fab is converted from the normal form to isoAsp form spontaneously and time-dependently under physiological conditions. The isoAsp residue was identified with tryptic peptide mapping, N-terminal sequencing, and the protein isoaspartyl methyltransferase assay. Based on the fluorescence quenching method, the isoAsp form of 64M-5 Fab shows a one order of magnitude lower binding constant for its dinucleotide ligand dT(6-4)T than the normal form. According to the structure of the isoAsp form, the conformation of CDR L1 is changed from the normal form to isoAsp form; the loss of hydrogen bonds involving the Asn28L side-chain, and structural conversion of the β-turn from type I to type II'. The formation of isoAsp leads to a large displacement of the side chain of His27dL, and decreased electrostatic interactions with the phosphate group of dT(6-4)T. Such structural changes should be responsible for the lower affinity of the isoAsp form for dT(6-4)T than the normal form. These findings may provide insight into neurodegenerative diseases (NDDs) and related diseases caused by misfolded proteins.

Structures of the antibody 64M-5 Fab and its complex with dT(6-4)T indicate induced-fit and high-affinity mechanisms

DNA photoproducts with (6-4) pyrimidine-pyrimidone adducts produced by ultraviolet light are mutagenic and carcinogenic. The crystal structures of the anti-(6-4) photoproduct antibody 64M-5 Fab and of its complex with dT(6-4)T were determined at 2.5 and 2.0 Å resolution, respectively. A comparison between the dT(6-4)T-liganded and unliganded structures indicates that the side chain of His93L is greatly rotated and shifted on binding to dT(6-4)T, leading to the formation of an electrostatic interaction with the phosphate moiety of dT(6-4)T, which shows a remarkable induced fit. Based on a comparison of the dT(6-4)T-liganded structures of the 64M-5 and 64M-2 Fabs, the electrostatic interaction between the side chain of His93L in 64M-5 and the phosphate moiety of dT(6-4)T is lost for Leu93L in 64M-2, while Arg90L in 64M-5 instead of Gln90L in 64M-2 stabilizes the conformation of complementarity-determining region (CDR) L3. These differences contribute to the higher affinity of 64M-5 for dT(6-4)T compared with that of 64M-2.

An anti-DNA antibody prefers damaged dsDNA over native

DNA-protein interactions, including DNA-antibody complexes, have both fundamental and practical significance. In particular, antibodies against double-stranded DNA play an important role in the pathogenesis of autoimmune diseases. Elucidation of structural mechanisms of an antigen recognition and interaction of anti-DNA antibodies provides a basis for understanding the role of DNA-containing immune complexes in human pathologies and for new treatments. Here we used Molecular Dynamic simulations of bimolecular complexes of a segment of dsDNA with a monoclonal anti-DNA antibody's Fab-fragment to obtain detailed structural and physical characteristics of the dynamic intermolecular interactions. Using a computationally modified crystal structure of a Fab-DNA complex (PDB: 3VW3), we studied in silico equilibrium Molecular Dynamics of the Fab-fragment associated with two homologous dsDNA fragments, containing or not containing dimerized thymine, a product of DNA photodamage. The Fab-fragment interactions with the thymine dimer-containing DNA was thermodynamically more stable than with the native DNA. The amino acid residues constituting a paratope and the complementary nucleotide epitopes for both Fab-DNA constructs were identified. Stacking and electrostatic interactions were shown to play the main role in the antibody-dsDNA contacts, while hydrogen bonds were less significant. The aggregate of data show that the chemically modified dsDNA (containing a covalent thymine dimer) has a higher affinity toward the antibody and forms a stronger immune complex. These findings provide a mechanistic insight into formation and properties of the pathogenic anti-DNA antibodies in autoimmune diseases, such as systemic lupus erythematosus, associated with skin photosensibilization and DNA photodamage.

Structural biology of DNA (6-4) photoproducts formed by ultraviolet radiation and interactions with their binding proteins

Exposure to the ultraviolet component of sunlight causes DNA damage, which subsequently leads to mutations, cellular transformation, and cell death. DNA photoproducts with (6-4) pyrimidine-pyrimidone adducts are more mutagenic than cyclobutane pyrimidine dimers. These lesions must be repaired because of the high mutagenic potential of (6-4) photoproducts. We here reviewed the structures of (6-4) photoproducts, particularly the detailed structures of the (6-4) lesion and (6-4) lesion-containing double-stranded DNA. We also focused on interactions with their binding proteins such as antibody Fabs, (6-4) photolyase, and nucleotide excision repair protein. The (6-4) photoproducts that bound to these proteins had common structural features: The 5'-side thymine and 3'-side pyrimidone bases of the T(6-4)T segment were in half-chair and planar conformations, respectively, and both bases were positioned nearly perpendicularly to each other. Interactions with binding proteins showed that the DNA helices flanking the T(6-4)T segment were largely kinked, and the flipped-out T(6-4)T segment was recognized by these proteins. These proteins had distinctive binding-site structures that were appropriate for their functions.

Aromatic interactions modulate the 5'-base selectivity of the DNA-binding autoantibody ED-10

We present detailed computational analyses of the binding of four dinucleotides to a highly sequence-selective single-stranded DNA (ssDNA) binding antibody (ED-10) and selected point mutants. Anti-DNA antibodies are central to the pathogenesis of systemic lupus erythematosus (SLE), and a more complete understanding of the mode of binding of DNA and other ligands will be necessary to elucidate the role of anti-DNA antibodies in the kidney inflammation associated with SLE. Classical molecular mechanics based molecular dynamics simulations and density functional theory (DFT) computations were applied to pinpoint the origin of selectivity for the 5'-nucleotide. In particular, the strength of interactions between each nucleotide and the surrounding residues were computed using MMGBSA as well as DFT applied to a cluster model of the binding site. The results agree qualitatively with experimental binding free energies, and indicate that π-stacking, CH/π, NH/π, and hydrogen-bonding interactions all contribute to 5'-base selectivity in ED-10. Most importantly, the selectivity for dTdC over dAdC arises primarily from differences in the strength of π-stacking and XH/π interactions with the surrounding aromatic residues; hydrogen bonds play little role. These data suggest that a key Tyr residue, which is not present in other anti-DNA antibodies, plays a key role in the 5'-base selectivity, while we predict that the mutation of a single Trp residue can tune the selectivity for dTdC over dAdC.

Structure of a double-stranded DNA (6-4) photoproduct in complex with the 64M-5 antibody Fab

DNA photoproducts with (6-4) pyrimidine-pyrimidone adducts formed by ultraviolet radiation have been implicated in mutagenesis and cancer. The crystal structure of double-stranded DNA containing the (6-4) photoproduct in complex with the anti-(6-4)-photoproduct antibody 64M-5 Fab was determined at 2.5 Å resolution. The T(6-4)T segment and the 5'-side adjacent adenosine are flipped out of the duplex and are accommodated in the concave antigen-binding pocket composed of six complementarity-determining regions (CDRs). A loop comprised of CDR L1 residues is inserted between the flipped-out T(6-4)T segment and the complementary DNA. The separation of strands by the insertion of the loop facilitates extensive and specific recognition of the photoproduct. The DNA helices flanking the T(6-4)T segment are kinked by 87°. The 64M-5 Fab recognizes the T(6-4)T segment dissociated from the complementary strand, indicating that the (6-4) photoproduct can be detected in double-stranded DNA as well as in single-stranded DNA using the 64M-5 antibody. The structure and recognition mode of the 64M-5 antibody were compared with those of the DNA (6-4) photolyase and nucleotide-excision repair protein DDB1-DDB2. These proteins have distinctive binding-site structures that are appropriate for their functions, and the flipping out of the photolesion and the kinking of the DNA are common to mutagenic (6-4) photoproducts recognized by proteins.

Structure of the DNA (6-4) photoproduct dTT(6-4)TT in complex with the 64M-2 antibody Fab fragment implies increased antibody-binding affinity by the flanking nucleotides

Pyrimidine (6-4) pyrimidone DNA photoproducts produced by ultraviolet light are highly mutagenic and carcinogenic. The crystal structure of the dTT(6-4)TT photoproduct in complex with the Fab fragment of the antibody 64M-2 that is specific for (6-4) photoproducts was determined at 2.4 Å resolution. The dT(6-4)T segment is fully accommodated in the concave binding pocket of the Fab, as observed in the complex of dT(6-4)T with the Fab. The pyrimidine and pyrimidone bases of the dT(6-4)T segment are positioned nearly perpendicularly to each other. The thymidine segments flanking both ends extend away from the dT(6-4)T segment. The 5'-side thymine base is parallel to the side chain of Tyr100iH of the antibody heavy chain and is also involved in electrostatic interactions with Asn30L, Tyr32L and Lys50L of the antibody light chain. The 5'-side and 3'-side phosphate groups exhibit electrostatic interactions with Asn28L and Ser58H, respectively. These interactions with the flanking nucleotides explain why longer oligonucleotides containing dT(6-4)T segments in the centre show higher antibody-binding affinities than the dT(6-4)T ligand.

Effect of somatic mutation on DNA binding properties of anti-DNA autoantibodies

Autoantibodies that bind DNA are a hallmark of systemic lupus erythematosus. A subset of autoantibody*DNA complexes localize to kidney tissue and lead to damage and even death. 11F8, 9F11, and 15B10 are clonally related anti-DNA autoantibodies isolated from an autoimmune mouse. 11F8 binds ssDNA in a sequence-specific manner and causes tissue damage, while 9F11 and 15B10 bind ssDNA non-specifically and are benign. Among these antibodies, DNA binding properties are mediated by five amino acid differences in primary sequence. Thermodynamic and kinetic parameters associated with recognition of structurally different DNA sequences were determined for each antibody to provide insight toward recognition strategies, and to explore a link between binding properties and disease pathogenesis. A model of 11F8 bound to its high affinity consensus sequence provides a foundation for understanding the differences in thermodynamic and kinetic parameters between the three mAbs. Our data suggest that 11F8 utilizes the proposed ssDNA recognition motif including (Y32)V(L), a hydrogen bonding residue at (91)V(L), and an aromatic residue at the tip of the third heavy chain complementarity determining region. Interestingly, a somatic mutation to arginine at (31)V(H) in 11F8 may afford additional binding site contacts including (R31)V(H), (R96)V(H), and (R98)V(H) that could determine specificity.

Specific recognition of a DNA immunogen by its elicited antibody

DNA recognition by antibodies is a key feature of autoimmune diseases, yet model systems with structural information are very limited. The monoclonal antibody ED-10 recognizes one of the strands of the DNA duplex used in the immunogenic complex. Modifications of the 5' end decrease the binding affinity and short oligonucleotides retain high binding affinity. We determined crystal structures for the Fab bound to a 6-mer oligonucleotide containing the specific sequence that raised the antibody and compared it with the unliganded Fab. Only the first two bases from the 5' end (dTdC) display electron density and we observe four key hydrogen bonds at the interface. The thymine ring is stacked between TrpH50 and TrpH95, and the cytosine ring is packed against TyrL32. Upon DNA binding, TyrH97 and TrpH95 rearrange to allow subnanomolar binding affinity, five orders of magnitude higher than other reported complexes, possibly because of having gone through affinity maturation. This structure represents the first bona fide antibody DNA immunogen complex described in atomic detail.

High-resolution crystal structure of the intramolecular d(TpA) thymine-adenine photoadduct and its mechanistic implications

A high-resolution crystal structure is reported for d(TpA)*, the intramolecular thymine–adenine photoadduct that is produced by direct ultraviolet excitation of the dinucleoside monophosphate d(TpA). It confirms the presence of a central 1,3-diazacyclooctatriene ring linking the remnants of the T and A bases, as previously deduced from heteronuclear NMR measurements by Zhao et al. (The structure of d(TpA)*, the major photoproduct of thymidylyl-(3′-5′)-deoxyadenosine. Nucleic Acids Res., 1996, 24, 1554–1560). Within the crystal, the d(TpA)* molecules exist as zwitterions with a protonated amidine fragment of the eight-membered ring neutralizing the charge of the internucleotide phosphate monoanion. The absolute configuration at the original thymine C5 and C6 atoms is determined as 5S,6R. This is consistent with d(TpA)* arising by valence isomerization of a precursor cyclobutane photoproduct with cis–syn stereochemistry that is generated by [2 + 2] photoaddition of the thymine 5,6-double bond across the C6 and C5 positions of adenine. This mode of photoaddition should be favoured by the stacked conformation of adjacent T and A bases in B-form DNA. It is probable that the primary photoreaction is mechanistically analogous to pyrimidine dimerization despite having a much lower quantum yield.

DNA-binding properties of the antibody specific for the Dewar photoproduct of thymidylyl-(3-5')-thymidine

A monoclonal antibody (DEM-1) specific for the Dewar photoproduct is used for detection and quantification of photolesions in DNA. To help understand the molecular recognition of damaged DNA by the antibody protein, we have cloned and sequenced the variable region genes of DEM-1. We have also prepared Fab fragments of DEM-1 (DEM1Fab), and synthesized two kinds of 3'-biotinylated oligonucleotides of different lengths containing a central Dewar photoproduct of TpT to analyze the effects of the antigen size on the binding rates by means of surface plasmon resonance (SPR). Results obtained from SPR analyses suggest that DEM1Fab may recognize tetranucleotide unit as the epitope.

Analysis of correlated domain motions in IgG light chain reveals possible mechanisms of immunological signal transduction

It was shown experimentally that binding of a micelle composed of Congo red molecules to immunological complexes leads to the enhanced stability of the latter, and simultaneously prevents binding of a complement molecule (C1q). The dye binds in a cavity created by the removal of N-terminal polypeptide chain, as observed experimentally in a model system-immunoglobulin G (IgG) light chain dimer. Molecular Dynamics (MD) simulations of three forms of IgG light chain dimer, with and without the dye, were performed to investigate the role of N-terminal fragment and self-assembled ligand in coupling between V and C domains. Root-mean-square distance (RMSD) time profiles show that removal of N-terminal fragment leads to destabilization of V domain. A micelle composed of four self-assembled dye molecules stabilizes and fixes the domain. Analysis of root-mean-square fluctuation (RMSF) values and dynamic cross-correlation matrices (DCCM) reveals that removal of N-terminal fragment results in complete decoupling between V and C domains. Binding of self-assembled Congo red molecules improves the coupling, albeit slightly. The disruption of a small beta-sheet composed of N- and C-terminal fragments of the domain (NC sheet) is the most likely reason for the decoupling. Self-assembled ligand, bound in the place originally occupied by N-terminal fragment, is not able to take over the function of the beta-sheet. Lack of correlation of motions between residues in V and C domains denotes that light chain-Congo red complexes have hampered ability to transmit conformational changes between domains. This is a likely explanation of the lack of complement binding by immunological complexes, which bind Congo red, and supports the idea that the NC sheet is the key structural fragment taking part in immunological signal transduction.

Local and long-range structural effects caused by the removal of the N-terminal polypeptide fragment from immunoglobulin L chain lambda

The role of the N-terminal polypeptide fragment of the immunoglobulin l-chain in V domain packing stability, and the flexibility of the whole chain was approached by molecular dynamics simulation. The observations were supported by experimental analysis. The N-terminal polypeptide fragment appeared to be the low-stability packing element in the V domain. At moderately elevated temperature it may be replaced at its packing locus by Congo red and then removed by proteolysis. After removal of Congo red by adsorption to (diethylamino)ethyl (DEAE) cellulose, the stability of complete L chain and of L chain devoid of the N-terminal polypeptide fragment were compared. The results indicated that the N-terminal polypeptide fragment plays an essential role in the stability of the V domain. Its removal makes the domain accessible for ANS and Congo red dye binding without heating. The decreased domain stability was registered in particular as increased root mean square (RMS) fluctuation and higher susceptibility to proteolytic attack. The long-range effect was most clearly manifested at 340 K as independent V and C domain fluctuation in the l-chain devoid of the N-terminal polypeptide fragment. This is likely due to the lack of direct connections between the N- and C-termini of the V domain polypeptide. In a complete V domain the connection involves residues 8-12 and 106-110 in particular. Partial or complete disruption of this connection increases the freedom of V domain rotation, while its increased cohesion strengthens the coupling of the V and C domains, making the whole L chain less flexible.

Ab initio study of the (5R)- and (5S)-TT pyrimidine h5(6-4) pyrimidone photoproducts. Implications on the design of new biologically relevant analogues

A computational study of a series of N(1)- and/or C(6)-alkyl-5,6-dihydrothymine diastereomers at theory levels up to MP4(SDTQ)/6-31G//HF/6-31G and MP2/6-311G//HF/6-31G has demonstrated the respective importance of the substituents at positions 1, 5, and 6 on the energetically favored conformation of each isomer. Results obtained both in the gas and condensed phase indicate that unsubstitution of the N(1)-position favors a half-chair conformation with the C(5) -and C(6)-substituents in the equatorial position. On the other hand, in the case of the (6S)-1,6-dimethyl-5,6-dihydrothymine, the C(6)-substituent adopts the axial position to minimize its van der Waals interactions with the N(1)-substituent. Furthermore, if the configuration at the C(5)-dihydrothymine position has no resultant influence on the total molecular free energy, when a pyrimidone substituent is introduced at the dihydrothymine C(6)-position, additional repulsive forces between the C(5)- and C(6)-substituents make the diaxially substituted half-chair conformation the most energetically favorable one. These results indicate that the observed C(6)-axially substituted conformation of the thymine-thymine pyrimidine h(5)(6-4) pyrimidone photoproducts is not necessarily induced by the macrocyclic structure. They also nicely explain the formation mechanism of these photoproduct derivatives, and allow the prediction of the conformation of new analogues.

Crystal structure of an antigen-binding fragment bound to single-stranded DNA

Antibodies to DNA are characteristic of the autoimmune disease systemic lupus erythematosus (SLE) and they also serve as models for the study of protein-DNA recognition. Anti-DNA antibodies often play an important role in disease pathogenesis by mediating kidney damage via antibody-DNA immune complex formation. The structural underpinnings of anti-DNA antibody pathogenicity and antibody-DNA recognition, however, are not well understood, due in part to the lack of direct, experimental three-dimensional structural information on antibody-DNA complexes. To address these issues for anti-single-stranded DNA antibodies, we have determined the 2.1 A crystal structure of a recombinant Fab (DNA-1) in complex with dT5. DNA-1 was previously isolated from a bacteriophage Fab display library from the immunoglobulin repertoire of an SLE-prone mouse. The structure shows that DNA-1 binds oligo(dT) primarily by sandwiching thymine bases between Tyr side-chains, which allows the bases to make sequence-specific hydrogen bonds. The critical stacking Tyr residues are L32, L49, H100, and H100A, while His L91 and Asn L50 contribute hydrogen bonds. Comparison of the DNA-1 structure to other anti-nucleic acid Fab structures reveals a common ssDNA recognition module consisting of Tyr L32, a hydrogen bonding residue at position L91, and an aromatic side-chain from the tip of complementarity determining region H3. The structure also provides a framework for interpreting previously determined thermodynamics data, and this analysis suggests that hydrophobic desolvation might underlie the observed negative enthalpy of binding. Finally, Arg side-chains from complementarity determining region H3 appear to play a novel role in DNA-1. Rather than forming ion pairs with dT5, Arg contributes to oligo(dT) recognition by helping to maintain the structural integrity of the combining site. This result is significant because antibody pathogenicity is thought to be correlated to the Arg content of anti-DNA antibody hypervariable loops.

DNA deformability as a recognition feature in the reverb response element

Most nuclear receptors recognize the same consensus hexameric sequence, AGGTCA. An important question has been how the various members of this transcription factor family distinguish identity features in these closely related DNA sites. We determined structures from several crystal forms of the RevErb-DNA complex and analyzed the patterns of protein-DNA interactions and DNA distortions. We found a significant and consistent DNA distortion at a TA step directly preceding the first consensus 5'-AGGTCA-3' recognition sequence. Importantly, while this base-pair sequence is associated with RevErb's high-affinity sites, there are no sequence-specific contacts formed with the protein. Our study shows that RevErb relies instead on the intrinsic geometry and flexibility of this TA site to make the required fit between the proteins' independent major groove and minor groove binding interactions, which occur on both sides of the TA step. Our findings extend the description of response element discrimination to include a role for sequence-dependent DNA deformations and suggest how other monomeric members of this superfamily, such as NGFI-B, SF-1, and ROR, could also recognize unique geometric features in their DNA targets.