ATPase center of bacteriophage lambda terminase involved in post-cleavage stages of DNA packaging: identification of ATP-interactive amino acids

Structural basis of DNA packaging by a ring-type ATPase from an archetypal viral system

Many essential cellular processes rely on substrate rotation or translocation by a multi-subunit, ring-type NTPase. A large number of double-stranded DNA viruses, including tailed bacteriophages and herpes viruses, use a homomeric ring ATPase to processively translocate viral genomic DNA into procapsids during assembly. Our current understanding of viral DNA packaging comes from three archetypal bacteriophage systems: cos, pac and phi29. Detailed mechanistic understanding exists for pac and phi29, but not for cos. Here, we reconstituted in vitro a cos packaging system based on bacteriophage HK97 and provided a detailed biochemical and structural description. We used a photobleaching-based, single-molecule assay to determine the stoichiometry of the DNA-translocating ATPase large terminase. Crystal structures of the large terminase and DNA-recruiting small terminase, a first for a biochemically defined cos system, reveal mechanistic similarities between cos and pac systems. At the same time, mutational and biochemical analyses indicate a new regulatory mechanism for ATPase multimerization and coordination in the HK97 system. This work therefore establishes a framework for studying the evolutionary relationships between ATP-dependent DNA translocation machineries in double-stranded DNA viruses.

Functional Dissection of a Viral DNA Packaging Machine's Walker B Motif

Many viruses employ ATP-powered motors for genome packaging. We combined genetic, biochemical, and single-molecule techniques to confirm the predicted Walker-B ATP-binding motif in the phage λ motor and to investigate the roles of the conserved residues. Most changes of the conserved hydrophobic residues resulted in >107-fold decrease in phage yield, but we identified nine mutants with partial activity. Several were cold-sensitive, suggesting that mobility of the residues is important. Single-molecule measurements showed that the partially active A175L exhibits a small reduction in motor velocity and increase in slipping, consistent with a slowed ATP binding transition, whereas G176S exhibits decreased slipping, consistent with an accelerated transition. All changes to the conserved D178, predicted to coordinate Mg2+•ATP, were lethal except conservative change D178E. Biochemical interrogation of the inactive D178N protein found no folding or assembly defects and near-normal endonuclease activity, but a ∼200-fold reduction in steady-state ATPase activity, a lag in the single-turnover ATPase time course, and no DNA packaging, consistent with a critical role in ATP-coupled DNA translocation. Molecular dynamics simulations of related enzymes suggest that the aspartate plays an important role in enhancing the catalytic activity of the motor by bridging the Walker motifs and precisely contributing its charged group to help polarize the bound nucleotide. Supporting this prediction, single-molecule measurements revealed that change D178E reduces motor velocity without increasing slipping, consistent with a slowed hydrolysis step. Our studies thus illuminate the mechanistic roles of Walker-B residues in ATP binding, hydrolysis, and DNA translocation by this powerful motor.

Acidic residues and a predicted, highly conserved α-helix are critical for the endonuclease/strand separation functions of bacteriophage λ's TerL

Complementation, endonuclease, strand separation, and packaging assays using mutant TerL^λ 's, coupled with bioinformatic information and modeling of its endonuclease, identified five residues, D401, E408, D465, E563, and E586, as critical acidic residues of TerL^λ 's endonuclease. Studies of phage and viral TerL nucleases indicate acidic residues participate in metal ion-binding, part of a two-ion metal catalysis mechanism, where metal ion A activates a water for DNA backbone hydrolysis. Modeling places D401, D465, and E586 in locations analogous to those of the metal-binding residues of many phage and viral TerLs. Our work leads to a model of TerL^λ 's endonuclease domain where at least three acidic residues from a ~185 residue segment (D401 to E586) are near each other in the structure, forming the endonuclease catalytic center at cosN, the nicking site. DNA interactions required to bring the rotationally symmetric cosN precisely to the catalytic center are proposed to rely on an ~60 residue region that includes a conserved α-helix for dimerization. Metal ion A, positioned by TerL^λ 's acidic D401 and E586, would be placed at cosN for water activation, ensuring high accuracy for DNA backbone hydrolysis.

Natural history of a viral cohesive end site: cosN of the λ-like phages

The base pairs of cosN, the site where the 12 base-long cohesive ends are generated in λ-like phages, show partial-two fold rotational symmetry. In a bioinformatic survey, we found that the cosN changes in 12 natural cosN variants are restricted to bp 6-to-12 of the cohesive end sequence. In contrast, bp 1-5 of the cohesive end sequence are strictly conserved (13/13), as are the two bp flanking the left nicking site (bp -2 and -1). The bp flanking the right nick site (bp 13 and 14) are conserved in 12 of 13 variants. Five cosN variants differing by as many as five bp were used to replace lambda's cosN. No significant effects of the cosN changes on λ's virus yield were found. In sum, bp -2 to 5 are critical cosN function, and bp 6-12 of the cohesive end sequence are not critical for terminase recognition or virus fitness.

Walker-A Motif Acts to Coordinate ATP Hydrolysis with Motor Output in Viral DNA Packaging

During the assembly of many viruses, a powerful ATP-driven motor translocates DNA into a preformed procapsid. A Walker-A "P-loop" motif is proposed to coordinate ATP binding and hydrolysis with DNA translocation. We use genetic, biochemical, and biophysical techniques to survey the roles of P-loop residues in bacteriophage lambda motor function. We identify 55 point mutations that reduce virus yield to below detectable levels in a highly sensitive genetic complementation assay and 33 that cause varying reductions in yield. Most changes in the predicted conserved residues K76, R79, G81, and S83 produce no detectable yield. Biochemical analyses show that R79A and S83A mutant proteins fold, assemble, and display genome maturation activity similar to wild-type (WT) but exhibit little ATPase or DNA packaging activity. Kinetic DNA cleavage and ATPase measurements implicate R79 in motor ring assembly on DNA, supporting recent structural models that locate the P-loop at the interface between motor subunits. Single-molecule measurements detect no translocation for K76A and K76R, while G81A and S83A exhibit strong impairments, consistent with their predicted roles in ATP binding. We identify eight residue changes spanning A78-K84 that yield impaired translocation phenotypes and show that Walker-A residues play important roles in determining motor velocity, pausing, and processivity. The efficiency of initiation of packaging correlates strongly with motor velocity. Frequent pausing and slipping caused by changes A78V and R79K suggest that these residues are important for ATP alignment and coupling of ATP binding to DNA gripping. Our findings support recent structural models implicating the P-loop arginine in ATP hydrolysis and mechanochemical coupling.

DNA Topology and the Initiation of Virus DNA Packaging

During progeny assembly, viruses selectively package virion genomes from a nucleic acid pool that includes host nucleic acids. For large dsDNA viruses, including tailed bacteriophages and herpesviruses, immature viral DNA is recognized and translocated into a preformed icosahedral shell, the prohead. Recognition involves specific interactions between the viral packaging enzyme, terminase, and viral DNA recognition sites. Generally, viral DNA is recognized by terminase’s small subunit (TerS). The large terminase subunit (TerL) contains translocation ATPase and endonuclease domains. In phage lambda, TerS binds a sequence repeated three times in cosB, the recognition site. TerS binding to cosB positions TerL to cut the concatemeric DNA at the adjacent nicking site, cosN. TerL introduces staggered nicks in cosN, generating twelve bp cohesive ends. Terminase separates the cohesive ends and remains bound to the cosB-containing end, in a nucleoprotein structure called Complex I. Complex I docks on the prohead’s portal vertex and translocation ensues. DNA topology plays a role in the TerS^λ-cosB^λ interaction. Here we show that a site, I2, located between cosN and cosB, is critically important for an early DNA packaging step. I2 contains a complex static bend. I2 mutations block DNA packaging. I2 mutant DNA is cut by terminase at cosN in vitro, but in vivo, no cos cleavage is detected, nor is there evidence for Complex I. Models for what packaging step might be blocked by I2 mutations are presented.

Finding of widespread viral and bacterial revolution dsDNA translocation motors distinct from rotation motors by channel chirality and size

Background

Double-stranded DNA translocation is ubiquitous in living systems. Cell mitosis, bacterial binary fission, DNA replication or repair, homologous recombination, Holliday junction resolution, viral genome packaging and cell entry all involve biomotor-driven dsDNA translocation. Previously, biomotors have been primarily classified into linear and rotational motors. We recently discovered a third class of dsDNA translocation motors in Phi29 utilizing revolution mechanism without rotation. Analogically, the Earth rotates around its own axis every 24 hours, but revolves around the Sun every 365 days.

Results

Single-channel DNA translocation conductance assay combined with structure inspections of motor channels on bacteriophages P22, SPP1, HK97, T7, T4, Phi29, and other dsDNA translocation motors such as bacterial FtsK and eukaryotic mimiviruses or vaccinia viruses showed that revolution motor is widespread. The force generation mechanism for revolution motors is elucidated. Revolution motors can be differentiated from rotation motors by their channel size and chirality. Crystal structure inspection revealed that revolution motors commonly exhibit channel diameters larger than 3 nm, while rotation motors that rotate around one of the two separated DNA strands feature a diameter smaller than 2 nm. Phi29 revolution motor translocated double- and tetra-stranded DNA that occupied 32% and 64% of the narrowest channel cross-section, respectively, evidencing that revolution motors exhibit channel diameters significantly wider than the dsDNA. Left-handed oriented channels found in revolution motors drive the right-handed dsDNA via anti-chiral interaction, while right-handed channels observed in rotation motors drive the right-handed dsDNA via parallel threads. Tethering both the motor and the dsDNA distal-end of the revolution motor does not block DNA packaging, indicating that no rotation is required for motors of dsDNA phages, while a small-angle left-handed twist of dsDNA that is aligned with the channel could occur due to the conformational change of the phage motor channels from a left-handed configuration for DNA entry to a right-handed configuration for DNA ejection for host cell infection.

Conclusions

The revolution motor is widespread among biological systems, and can be distinguished from rotation motors by channel size and chirality. The revolution mechanism renders dsDNA void of coiling and torque during translocation of the lengthy helical chromosome, thus resulting in more efficient motor energy conversion.

The nuclease domain of the SPP1 packaging motor coordinates DNA cleavage and encapsidation

The large terminase subunit is a central component of the genome packaging motor from tailed bacteriophages and herpes viruses. This two-domain enzyme has an N-terminal ATPase activity that fuels DNA translocation during packaging and a C-terminal nuclease activity required for initiation and termination of the packaging cycle. Here, we report that bacteriophage SPP1 large terminase (gp2) is a metal-dependent nuclease whose stability and activity are strongly and preferentially enhanced by Mn(2+) ions. Mutation of conserved residues that coordinate Mn(2+) ions in the nuclease catalytic site affect the metal-induced gp2 stabilization and impair both gp2-specific cleavage at the packaging initiation site pac and unspecific nuclease activity. Several of these mutations block also DNA encapsidation without affecting ATP hydrolysis or gp2 C-terminus binding to the procapsid portal vertex. The data are consistent with a mechanism in which the nuclease domain bound to the portal switches between nuclease activity and a coordinated action with the ATPase domain for DNA translocation. This switch of activities of the nuclease domain is critical to achieve the viral chromosome packaging cycle.

Single-molecule studies of viral DNA packaging

Many double-stranded DNA bacteriophages and viruses use specialized ATP-driven molecular machines to package their genomes into tightly confined procapsid shells. Over the last decade, single-molecule approaches - and in particular, optical tweezers - have made key contributions to our understanding of this remarkable process. In this chapter, we review these advances and the insights they have provided on the packaging mechanisms of three bacteriophages: φ 29, λ, and T4.

Energy-independent helicase activity of a viral genome packaging motor

The assembly of complex double-stranded DNA viruses includes a genome packaging step where viral DNA is translocated into the confines of a preformed procapsid shell. In most cases, the preferred packaging substrate is a linear concatemer of viral genomes linked head-to-tail. Viral terminase enzymes are responsible for both excision of an individual genome from the concatemer (DNA maturation) and translocation of the duplex into the capsid (DNA packaging). Bacteriophage λ terminase site-specifically nicks viral DNA at the cos site in a concatemer and then physically separates the nicked, annealed strands to mature the genome in preparation for packaging. Here we present biochemical studies on the so-called helicase activity of λ terminase. Previous studies reported that ATP is required for strand separation, and it has been presumed that ATP hydrolysis is required to drive the reaction. We show that ADP and nonhydrolyzable ATP analogues also support strand separation at low (micromolar) concentrations. In addition, the Escherichia coli integration host factor protein (IHF) strongly stimulates the reaction in a nucleotide-independent manner. Finally, we show that elevated concentrations of nucleotide inhibit both ATP- and IHF-stimulated strand separation by λ terminase. We present a model where nucleotide and IHF interact with the large terminase subunit and viral DNA, respectively, to engender a site-specifically bound, catalytically competent genome maturation complex. In contrast, binding of nucleotide to the low-affinity ATP binding site in the small terminase subunit mediates a conformational switch that down-regulates maturation activities and activates the DNA packaging activity of the enzyme. This affords a motor complex that binds tightly, but nonspecifically, to DNA as it translocates the duplex into the capsid shell. These studies have yielded mechanistic insight into the assembly of the maturation complex on viral DNA and its transition to a mobile packaging motor that may be common to all of the complex double-stranded DNA viruses.

Mutations altering a structurally conserved loop-helix-loop region of a viral packaging motor change DNA translocation velocity and processivity

Many double-stranded DNA viruses employ ATP-driven motors to translocate their genomes into small, preformed viral capsids against large forces resisting confinement. Here, we show via direct single-molecule measurements that a mutation T194M downstream of the Walker B motif in the phage lambda gpA packaging motor causes an 8-fold reduction in translocation velocity without substantially changing processivity or force dependence, whereas the mutation G212S in the putative C (coupling) motif causes a 3-fold reduction in velocity and a 6-fold reduction in processivity. Meanwhile a T194M pseudorevertant (T194V) showed a near restoration of the wild-type dynamics. Structural comparisons and modeling show that these mutations are in a loop-helix-loop region that positions the key residues of the catalytic motifs, Walker B and C, in the ATPase center and is structurally homologous with analogous regions in chromosome transporters and SF2 RNA helicases. Together with recently published studies of SpoIIIE chromosome transporter and Ded1 RNA helicase mutants, these findings suggest the presence of a structurally conserved region that may be a part of the mechanism that determines motor velocity and processivity in several different types of nucleic acid translocases.

The Q motif of a viral packaging motor governs its force generation and communicates ATP recognition to DNA interaction

A key step in the assembly of many viruses is the packaging of DNA into preformed procapsids by an ATP-powered molecular motor. To shed light on the motor mechanism we used single-molecule optical tweezers measurements to study the effect of mutations in the large terminase subunit in bacteriophage lambda on packaging motor dynamics. A mutation, K84A, in the putative ATPase domain driving DNA translocation was found to decrease motor velocity by approximately 40% but did not change the force dependence or decrease processivity substantially. These findings support the hypothesis that a deviant "Walker A-like" phosphate-binding motif lies adjacent to residue 84. Another mutation, Y46F, was also found to decrease motor velocity by approximately 40% but also increase slipping during DNA translocation by >10-fold. These findings support the hypothesis that viral DNA packaging motors contain an adenine-binding motif that regulates ATP hydrolysis and substrate affinity analogous to the "Q motif" recently identified in DEAD-box RNA helicases. We also find impaired force generation for the Y46F mutant, which shows that the Q motif plays an important role in determining the power and efficiency of the packaging motor.

The bacteriophage DNA packaging motor

An ATP-powered DNA translocation machine encapsidates the viral genome in the large dsDNA bacteriophages. The essential components include the empty shell, prohead, and the packaging enzyme, terminase. During translocation, terminase is docked on the prohead's portal protein. The translocation ATPase and the concatemer-cutting endonuclease reside in terminase. Remarkably, terminases, portal proteins, and shells of tailed bacteriophages and herpes viruses show conserved features. These DNA viruses may have descended from a common ancestor. Terminase's ATPase consists of a classic nucleotide binding fold, most closely resembling that of monomeric helicases. Intriguing models have been proposed for the mechanism of dsDNA translocation, invoking ATP hydrolysis-driven conformational changes of portal or terminase powering DNA motion. Single-molecule studies show that the packaging motor is fast and powerful. Recent advances permit experiments that can critically test the packaging models. The viral genome translocation mechanism is of general interest, given the parallels between terminases, helicases, and other motor proteins.

Novel mechanism of hexamer ring assembly in protein/RNA interactions revealed by single molecule imaging

Many nucleic acid-binding proteins and the AAA+ family form hexameric rings, but the mechanism of hexamer assembly is unclear. It is generally believed that the specificity in protein/RNA interaction relies on molecular contact through a surface charge or 3D structure matching via conformational capture or induced fit. The pRNA of bacteriophage phi29 DNA-packaging motor also forms a ring, but whether the pRNA ring is a hexamer or a pentamer is under debate. Here, single molecule studies elucidated a mechanism suggesting the specificity and affinity in protein/RNA interaction relies on pRNA static ring formation. A combined pRNA ring-forming group was very specific for motor binding, but the isolated individual members of the ring-forming group bind to the motor nonspecifically. pRNA did not form a ring prior to motor binding. Only those RNAs that formed a static ring, via the interlocking loops, stayed on the motor. Single interlocking loop interruption resulted in pRNA detachment. Extension or reduction of the ring circumference failed in motor binding. This new mechanism was tested by redesigning two artificial RNAs that formed hexamer and packaged DNA. The results confirmed the stoichiometry of pRNA on the motor was the common multiple of two and three, thus, a hexamer.

Packaging of a unit-length viral genome: the role of nucleotides and the gpD decoration protein in stable nucleocapsid assembly in bacteriophage lambda

The developmental pathways for a variety of eukaryotic and prokaryotic double-stranded DNA viruses include packaging of viral DNA into a preformed procapsid structure, catalyzed by terminase enzymes and fueled by ATP hydrolysis. In most instances, a capsid expansion process accompanies DNA packaging, which significantly increases the volume of the capsid to accommodate the full-length viral genome. "Decoration" proteins add to the surface of the expanded capsid lattice, and the terminase motors tightly package DNA, generating up to approximately 20 atm of internal capsid pressure. Herein we describe biochemical studies on genome packaging using bacteriophage lambda as a model system. Kinetic analysis suggests that the packaging motor possesses at least four ATPase catalytic sites that act cooperatively to effect DNA translocation, and that the motor is highly processive. While not required for DNA translocation into the capsid, the phage lambda capsid decoration protein gpD is essential for the packaging of the penultimate 8-10 kb (15-20%) of the viral genome; virtually no DNA is packaged in the absence of gpD when large DNA substrates are used, most likely due to a loss of capsid structural integrity. Finally, we show that ATP hydrolysis is required to retain the genome in a packaged state subsequent to condensation within the capsid. Presumably, the packaging motor continues to "idle" at the genome end and to maintain a positive pressure towards the packaged state. Surprisingly, ADP, guanosine triphosphate, and the nonhydrolyzable ATP analog 5'-adenylyl-beta,gamma-imidodiphosphate (AMP-PNP) similarly stabilize the packaged viral genome despite the fact that they fail to support genome packaging. In contrast, the poorly hydrolyzed ATP analog ATP-gammaS only partially stabilizes the nucleocapsid, and a DNA is released in "quantized" steps. We interpret the ensemble of data to indicate that (i) the viral procapsid possesses a degree of plasticity that is required to accommodate the packaging of large DNA substrates; (ii) the gpD decoration protein is required to stabilize the fully expanded capsid; and (iii) nucleotides regulate high-affinity DNA binding interactions that are required to maintain DNA in the packaged state.

Viral nanomotors for packaging of dsDNA and dsRNA

While capsid proteins are assembled around single-stranded genomic DNA or RNA in rod-shaped viruses, the lengthy double-stranded genome of other viruses is packaged forcefully within a preformed protein shell. This entropically unfavourable DNA or RNA packaging is accomplished by an ATP-driven viral nanomotor, which is mainly composed of two components, the oligomerized channel and the packaging enzymes. This intriguing DNA or RNA packaging process has provoked interest among virologists, bacteriologists, biochemists, biophysicists, chemists, structural biologists and computational scientists alike, especially those interested in nanotechnology, nanomedicine, AAA+ family proteins, energy conversion, cell membrane transport, DNA or RNA replication and antiviral therapy. This review mainly focuses on the motors of double-stranded DNA viruses, but double-stranded RNA viral motors are also discussed due to interesting similarities. The novel and ingenious configuration of these nanomotors has inspired the development of biomimetics for nanodevices. Advances in structural and functional studies have increased our understanding of the molecular basis of biological movement to the point where we can begin thinking about possible applications of the viral DNA packaging motor in nanotechnology and medical applications.

The DNA maturation domain of gpA, the DNA packaging motor protein of bacteriophage lambda, contains an ATPase site associated with endonuclease activity

Terminase enzymes are common to double-stranded DNA (dsDNA) viruses and are responsible for packaging viral DNA into the confines of an empty capsid shell. In bacteriophage lambda the catalytic terminase subunit is gpA, which is responsible for maturation of the genome end prior to packaging and subsequent translocation of the matured DNA into the capsid. DNA packaging requires an ATPase catalytic site situated in the N terminus of the protein. A second ATPase catalytic site associated with the DNA maturation activities of the protein has been proposed; however, direct demonstration of this putative second site is lacking. Here we describe biochemical studies that define protease-resistant peptides of gpA and expression of these putative domains in Escherichia coli. Biochemical characterization of gpA-DeltaN179, a construct in which the N-terminal 179 residues of gpA have been deleted, indicates that this protein encompasses the DNA maturation domain of gpA. The construct is folded, soluble and possesses an ATP-dependent nuclease activity. Moreover, the construct binds and hydrolyzes ATP despite the fact that the DNA packaging ATPase site in the N terminus of gpA has been deleted. Mutation of lysine 497, which alters the conserved lysine in a predicted Walker A "P-loop" sequence, does not affect ATP binding but severely impairs ATP hydrolysis. Further, this mutation abrogates the ATP-dependent nuclease activity of the protein. These studies provide direct evidence for the elusive nucleotide-binding site in gpA that is directly associated with the DNA maturation activity of the protein. The implications of these results with respect to the two roles of the terminase holoenzyme, DNA maturation and DNA packaging, are discussed.

New Functional Domains of Human Cytomegalovirus pUL89 predicted by Sequence Analysis and Three-Dimensional Modelling of the Catalytic Site DEXDc

Introduction

Benzimidazole d-ribonucleosides inhibit DNA packaging during human cytomegalovirus (HCMV) replication. Although they have been shown to target pUL56 and pUL89, the large and small subunits of the HCMV terminase respectively, their mechanism of action is not yet fully understood.

Methods and results

To better understand HCMV DNA maturation and the mechanism of action of benzimidazole derivatives, we studied the HCMV pUL89 protein by a genetic approach combined with primary structure analysis. The pUL89 sequence analysis of 25 HCMV strains and counterparts among herpesviruses allowed identification of 12 conserved regions. We also built a three-dimensional model of the pUL89 ATPasic catalytic site, including ATPase motor motifs I, II and III, that may facilitate the development of future antiviral drugs active against HCMV. Finally, we identified several putative functional domains in pUL89, such as pUL89 zinc finger (pUL89-ZF), DNA cutting sites and portal binding sites, that are probably involved in CMV DNA cleavage and packaging.

Virus DNA translocation: progress towards a first ascent of mount pretty difficult

Virion DNA molecules of large dsDNA viruses are highly condensed. To pack the DNA, an ATP hydrolysis-powered motor translocates the DNA into a preformed empty protein shell, the prohead. The icosahedral prohead has a special fivefold vertex, the portal vertex, where the translocation machinery acts. The portal vertex contains the portal protein, a gear-shaped dodecamer of radially disposed subunits with a central channel for DNA entry. The symmetry mismatch between the fivefold symmetry of the shell vertex and the 12-fold symmetry of the portal protein has prompted DNA packaging models in which ATP-driven portal protein rotation drives DNA translocation. In this issue of Molecular Microbiology, Baumann and colleagues test portal rotation models using bacteriophage T4. A fusion between the gp20 portal protein and the HOC external shell decoration protein is used to create a block to portal rotation. Finding that DNA packaging is unimpeded in proheads containing the fusion argues that portal rotation is not crucial to DNA translocation. The paper is a landmark for describing direct testing of the mechanism of DNA translocation.

Whole genome sequencing of a novel temperate bacteriophage ofP. aeruginosa: evidence of tRNA gene mediating integration of the phage genome into the host bacterial chromosome

Whole genome sequencing of a novel Pseudomonas aeruginosa temperate bacteriophage PaP3 has been completed. The genome contains 45 503 bp with GC content of 52.1%, without more than 100 bp sequence hitting homologue in all sequenced phage genomes. A total of 256 open reading frames (ORFs) are found in the genome, and 71 ORFs are predicated as coding sequence (CDS). All 71 CDS are divided into the two opposite direction groups, and both groups meet at the bidirectional terminator site locating the near middle of the genome. The genome is dsDNA with 5'-protruded cohesive ends and cohesive sequence is 'GCCGGCCCCTTTCCGCGTTA' (20 mer). There are four tRNA genes (tRNA(Asn), tRNA(Asp), tRNA(Tyr) and tRNA(Pro)) clustering at the 5'-terminal of the genome. Analysis of integration site of PaP3 in the host bacterial genome confirmed that the core sequence of (GGTCGTAGGTTCGAATCCTAC-21mer) locates at tRNA(Pro) gene within the attP region and at tRNA(Lys) gene in the attB region. The results indicated that 3'-end of tRNA(Pro) gene of the PaP3 genome is involved in the integration reaction and 5'-end of tRNA(Lys) gene of host bacteria genome is hot spot of the integration.

Interaction of gp16 with pRNA and DNA for Genome Packaging by the Motor of Bacterial Virus phi29

One striking feature in the assembly of linear double-stranded (ds) DNA viruses is that their genome is translocated into a preformed protein coat via a motor involving two non-structural components with certain characteristics of ATPase. In bacterial virus phi29, these two components include the protein gp16 and a packaging RNA (pRNA). The structure and function of other phi29 motor components have been well elucidated; however, studies on the role of gp16 have been seriously hampered by its hydrophobicity and self-aggregation. Such problems caused by insolubility also occur in the study of other viral DNA-packaging motors. Contradictory data have been published regarding the role and stoichiometry of gp16, which has been reported to bind every motor component, including pRNA, DNA, gp3, DNA-gp3, connector, pRNA-free procapsid, and procapsid/pRNA complex. Such conflicting data from a binding assay could be due to the self-aggregation of gp16. Our recent advance to produce soluble and highly active gp16 has enabled further studies on gp16. It was demonstrated in this report that gp16 bound to DNA non-specifically. gp16 bound to the pRNA-containing procapsid much more strongly than to the pRNA-free procapsid. The domain of pRNA for gp16 interaction was the 5'/3' paired helical region. The C18C19A20 bulge that is essential for DNA packaging was found to be dispensable for gp16 binding. This result confirms the published model that pRNA binds to the procapsid with its central domain and extends its 5'/3' DNA-packaging domain for gp16 binding. It suggests that gp16 serves as a linkage between pRNA and DNA, and as an essential DNA-contacting component during DNA translocation. The data also imply that, with the exception of the C18C19A20 bulge, the main role of the 5'/3' helical double-stranded region of pRNA is not for procapsid binding but for binding to gp16.

Binding of pRNA to the N-terminal 14 amino acids of connector protein of bacteriophage phi29

During assembly, bacterial virus phi29 utilizes a motor to insert genomic DNA into a preformed protein shell called the procapsid. The motor contains one twelve-subunit connector with a 3.6 nm central channel for DNA transportation, six viral-encoded RNA (packaging RNA or pRNA) and a protein, gp16, with unknown stoichiometry. Recent DNA-packaging models proposed that the 5-fold procapsid vertexes and 12-fold connector (or the hexameric pRNA ring) represented a symmetry mismatch enabling production of a force to drive a rotation motor to translocate and compress DNA. There was a discrepancy regarding the location of the foothold for the pRNA. One model [C. Chen and P. Guo (1997) J. Virol., 71, 3864–3871] suggested that the foothold for pRNA was the connector and that the pRNA–connector complex was part of the rotor. However, one other model suggested that the foothold for pRNA was the 5-fold vertex of the capsid protein and that pRNA was the stator. To elucidate the mechanism of phi29 DNA packaging, it is critical to confirm whether pRNA binds to the 5-fold vertex of the capsid protein or to the 12-fold symmetrical connector. Here, we used both purified connector and purified procapsid for binding studies with in vitro transcribed pRNA. Specific binding of pRNA to the connector in the procapsid was found by photoaffinity crosslinking. Removal of the N-terminal 14 amino acids of the gp10 protein by proteolytic cleavage resulted in undetectable binding of pRNA to either the connector or the procapsid, as investigated by agarose gel electrophoresis, SDS–PAGE, sucrose gradient sedimentation and N-terminal peptide sequencing. It is therefore concluded that pRNA bound to the 12-fold symmetrical connector to form a pRNA–connector complex and that the foothold for pRNA is the connector but not the capsid protein.

Self-association properties of the bacteriophage lambda terminase holoenzyme: implications for the DNA packaging motor

Terminases are enzymes common to complex double-stranded DNA viruses and are required for packaging of viral DNA into a protective capsid. Bacteriophage lambda terminase holoenzyme is a hetero-oligomer composed of the A and Nu1 lambda gene products; however, the self-association properties of the holoenzyme have not been investigated systematically. Here, we report the results of sedimentation velocity, sedimentation equilibrium, and gel-filtration experiments studying the self-association properties of the holoenzyme. We find that purified, recombinant lambda terminase forms a homogeneous, heterotrimeric structure, consisting of one gpA molecule associated with two gpNu1 molecules (114.2 kDa). We further show that lambda terminase adopts a heterogeneous mixture of higher-order structures, with an average molecular mass of 528(+/-34) kDa. Both the heterotrimer and the higher-order species possess site-specific cos cleavage activity, as well as DNA packaging activity; however, the heterotrimer is dependent upon Escherichia coli integration host factor (IHF) for these activities. Furthermore, the ATPase activity of the higher-order species is approximately 1000-fold greater than that of the heterotrimer. These data suggest that IHF bending of the duplex at the cos site in viral DNA promotes the assembly of the heterotrimer into a biologically active, higher-order packaging motor. We propose that a single, higher-order hetero-oligomer of gpA and gpNu1 functions throughout lambda development.

Bacteriophage lambda terminase: alterations of the high-affinity ATPase affect viral DNA packaging

DNA packaging by large DNA viruses such as the tailed bacteriophages and the herpesviruses involves DNA translocation into a preformed protein shell, called the prohead. Translocation is driven by an ATP hydrolysis-powered DNA packaging motor. The bacteriophages encode a heterodimeric viral DNA packaging protein, called terminase. The terminases have an ATPase center located in the N terminus of the large subunit implicated in DNA translocation. In previous work with phage lambda, lethal mutations that changed ATP-reactive residues 46 and 84 of gpA, the large terminase subunit, were studied. These mutant enzymes retained the terminase endonuclease and helicase activities, but had severe defects in virion assembly, and lacked the terminase high-affinity ATPase activity. Surprisingly, in the work described here, we found that enzymes with the conservative gpA changes Y46F and Y46A had only mild packaging defects. These mild defects contrast with their profound virion assembly defects. Thus, these mutant enzymes have, in addition to the mild DNA packaging defects, a severe post-DNA packaging defect. In contrast, the gpA K84A enzyme had similar virion assembly and DNA packaging defects. The DNA packaging energy budget, i.e. DNA packaged/ATP hydrolyzed, was unchanged for the mutant enzymes, indicating that DNA translocation is tightly coupled to ATP hydrolysis. A model is proposed in which gpA residues 46 and 84 are important for terminase's high-affinity ATPase activity. Assembly of the translocation complex remodels this ATPase so that residues 46 and 84 are not crucial for the activated translocation ATPase. Changing gpA residues 46 and 84 primarily affects assembly, rather than the activity, of the translocation complex.

The functional domains of bacteriophage t4 terminase

The packaging of double-stranded genomic DNA into some viral and all bacteriophage capsids is driven by powerful molecular motors. In bacteriophage T4, the motor consists of the portal protein assembly composed of twelve copies of gene product 20 (gp20, 61 kDa) and an oligomeric terminase complex composed of gp16 (18 kDa) and gp17 (70 kDa). The packaging motor drives the 171-kbp T4 DNA into the capsid utilizing the free energy of ATP hydrolysis. Evidence suggests that gp17 is the key component of the motor; it exhibits ATPase, nuclease, and in vitro DNA-packaging activities. The N- and C-terminal halves of gp17 were expressed and purified to homogeneity and found to have ATPase and nuclease activities, respectively. The N-terminal domain exhibited 2-3-fold higher Kcat values for gp16-stimulated ATPase than the full-length gp17. Neither of the domains, individually or together, exhibited in vitro DNA-packaging activity, suggesting that communication between the domains is essential for DNA packaging. The domains, in particular the C-terminal domain or a mixture of both the N- and C-terminal domains, inhibited in vitro DNA packaging that is catalyzed by full-length gp17. In conjunction with genetic evidence, these data suggest that the domains compete with the full-length gp17 for binding sites on the portal protein. A model for the assembly of the T4 DNA-packaging machine is presented.

Initial cos cleavage of bacteriophage lambda concatemers requires proheads and gpFI in vivo

The development of bacteriophage lambda and double-stranded DNA viruses in general involves the convergence of two separate pathways: DNA replication and head assembly. Clearly, packaging will proceed only if an empty capsid shell, the prohead, is present to receive the DNA, but genetic evidence suggests that proheads play another role in the packaging process. For example, lambda phages with an amber mutation in any head gene or in FI, the gene encoding the accessory packaging protein gpFI, are able to produce normal amounts of DNA concatemers but they are not cut, or matured, into unit length chromosomes for packaging. Similar observations have been made for herpes simplex 1 virus. In the case of lambda, a negative model proposes that in the amber phages, unassembled capsid components are inhibitory to maturation, and a positive model suggests that assembled proheads are required for cutting. We tested the negative model by using a deletion mutant devoid of all prohead genes and FI in an in vivo cos cleavage assay; in this deleted phage, the cohesive ends were not cut. When lambda proheads and gpFI were provided in vivo via a second prophage, cutting was restored, and gpFI was required, results that support the positive model. Phage 21 is a sister phage of lambda, and although its capsid proteins share approximately 60% residue identity with lambda's, phage 21 proheads did not restore cutting, even when provided with the accessory protein gpFI. Models for the role of proheads and gpFI in cos cutting are discussed.

Defining the bacteriophage T4 DNA packaging machine: evidence for a C-terminal DNA cleavage domain in the large terminase/packaging protein gp17

Double-stranded DNA packaging in bacteriophage T4 and other viruses occurs by translocation of DNA into an empty prohead by a packaging machine assembled at the portal vertex. Coordinated with this complex process is the cutting of concatemeric DNA to initiate and terminate DNA packaging and encapsidate one genome-length viral DNA. The catalytic site responsible for cutting, and the mechanisms by which cutting is precisely coordinated with DNA translocation remained as interesting open questions. Phage T4, unlike the phages with defined ends (e.g. lambda, T3, T7), packages DNA in a strictly headful manner, and exhibits no strict sequence specificity to initiate or terminate DNA packaging. Previous evidence suggests that the large terminase protein gp17, a key component of the T4 packaging machine, possesses a non-specific DNA cutting activity. A histidine-rich metal-binding motif, H382-X(2)-H385-X(16)-C402-X(8)-H411-X(2)-H414-X(15)-H430-X(5)-H436, in the C-terminal half of gp17 is thought to be involved in the terminase cleavage. Here, exhaustive site-directed mutagenesis revealed that none of the cysteine and histidine residues other than the H436 residue is critical for function. On the other hand, a cluster of conserved residues within this region, D401, E404, G405, and D409, are found to be critical for function. Biochemical analyses showed that the D401 mutants exhibited a novel phenotype, showing a loss of in vivo DNA cutting activity but not the DNA packaging activity. The functional nature of the critical residues and their disposition in the conserved loop region between two predicted beta-strands suggest that these residues are part of a metal-coordinated catalytic site that cleaves the phosphodiester bond of DNA substrate. The data suggest that the T4 terminase consists of at least two functional domains, an N-terminal DNA-translocating ATPase domain and a C-terminal DNA-cutting domain. Although the DNA recognition mechanisms may be distinct, it appears that T4 and other phage terminases employ a common catalytic paradigm for phosphodiester bond cleavage that is used by numerous nucleases.

Defining the ATPase center of bacteriophage T4 DNA packaging machine: requirement for a catalytic glutamate residue in the large terminase protein gp17

Double-stranded DNA packaging in icosahedral bacteriophages is driven by an ATPase-coupled packaging machine constituted by the portal protein and two non-structural packaging/terminase proteins assembled at the unique portal vertex of the empty viral capsid. Recent studies show that the N-terminal ATPase site of bacteriophage T4 large terminase protein gp17 is critically required for DNA packaging. It is likely that this is the DNA translocating ATPase that powers directional translocation of DNA into the viral capsid. Defining this ATPase center is therefore fundamentally important to understand the mechanism of ATP-driven DNA translocation in viruses. Using combinatorial mutagenesis and biochemical approaches, we have defined the catalytic carboxylate residue that is required for ATP hydrolysis. Although the original catalytic carboxylate hypothesis suggested the presence of a catalytic glutamate between the Walker A (SRQLGKT(161-167)) and Walker B (MIYID(251-255)) motifs, none of the four candidate glutamic acid residues, E198, E208, E220 and E227, is required for function. However, the E256 residue that is immediately adjacent to the putative Walker B aspartic acid residue (D255) exhibited a phenotypic pattern that is consistent with the catalytic carboxylate function. None of the amino acid substitutions, including the highly conservative D and Q, was tolerated. Biochemical analyses showed that the purified E256V, D, and Q mutant gp17s exhibited a complete loss of gp16-stimulated ATPase activity and in vitro DNA packaging activity, whereas their ATP binding and DNA cleavage functions remained intact. The data suggest that the E256 mutants are trapped in an ATP-bound conformation and are unable to catalyze the ATP hydrolysis-transduction cycle that powers DNA translocation. Thus, this study for the first time identified and characterized a catalytic glutamate residue that is involved in the energy transduction mechanism of a viral DNA packaging machine.

Identification of the ATP-binding site in the terminase subunit pUL56 of human cytomegalovirus

Human cytomegalovirus (HCMV) terminase is composed of subunits pUL56 (130 kDa) and pUL89 ( approximately 75 kDa), encoded by the UL56 and UL89 genes. In a recent investigation, we demonstrated that the main ATPase activity is associated with the large terminase subunit pUL56. The protein has two putative ATP-binding sites, which were suggested to be composed of the sequence (amino acids 463-470) for ATP-binding site 1 and YNETFGKQ (amino acids 709-716) for the second site. We now demonstrate using a 1.5 kb fragment encoding the C-terminal half of pUL56 that ATP-binding site 1 is not critical for the function, whereas ATP-binding site 2 is required for the enzymatic activity. Mutation G714A in this protein reduced the ATPase activity to approximately 65% and the double mutation G714A/K715N showed a reduction up to 75%. However, the substitution of E711A revoked the effect of the substitutions. The functional character of the ATP-binding site was demonstrated by transfer of YNETFGKQLSIACLR (709-723) to glutathione-S-transferase (GST). Interestingly, vanadate, an ATPase inhibitor, has the ability to block the ATPase activity of pUL56 as well as of Apyrase, while the antitumor ATP-mimetic agent geldanamycin, did not affect the ATP-binding of pUL56. Furthermore, in contrast to an inactive control compound, the specific HCMV terminase inhibitor BDCRB showed a partial inhibition of the pUL56-specific ATPase activity. Our results clearly demonstrated that (i) the enzymatic activity of the terminase subunit pUL56 could be inhibited by vanadate, (ii) only the ATP-binding site 2 is critical for the pUL56 function and (iii) glycine G714 is an invariant amino acid.

A viral RNA that binds ATP and contains a motif similar to an ATP-binding aptamer from SELEX

The intriguing process of free energy conversion, ubiquitous in all living organisms, is manifested in ATP binding and hydrolysis. ATPase activity has long been recognized to be a capability limited to proteins. However, the presence of an astonishing variety of unknown RNA species in cells and the finding that RNA has catalytic activity have bred the notion that RNA might not be excluded from the group of ATPases. All DNA-packaging motors of double-stranded DNA phages involve two nonstructural components with certain characteristics typical of ATPases. In bacterial virus phi29, one of these two components is an RNA (pRNA). Here we report that this pRNA is able to bind ATP. A comparison between the chemically selected ATP-binding RNA aptamer and the central region of pRNA reveals similarity in sequence and structure. The replacement of the central region of pRNA with the sequence from ATP-binding RNA aptamer produced chimeric aptRNA that is able to both bind ATP and assemble infectious viruses in the presence of ATP. RNA mutation studies revealed that changing only one base essential for ATP binding caused both ATP binding and viral assembly to cease, suggesting that the ATP binding motif is the vital part of the pRNA that forms a hexamer to drive the phi29 DNA-packaging motor. This is the first demonstration of a natural RNA molecule that binds ATP and the first case to report the presence of a SELEX-derived RNA aptamer in living organisms.

Biochemical characterization of bacteriophage lambda genome packaging in vitro

Bacteriophage lambda has been extensively studied, and the abundance of genetic and biochemical information available makes this an ideal model system to study virus DNA packaging at the molecular level. Limited in vitro packaging efficiency has hampered progress toward this end, however. It has been suggested that limited packaging efficiency is related to poor activity of purified procapsids. We describe the construction of a vector that expresses lambda procapsids with a yield that is 40-fold greater than existing systems. Consistent with previous studies, packaging of a mature lambda genome is very inefficient in vitro, with only 4% of the input procapsids utilized. Concatemeric DNA is the preferred packaging substrate in vivo, and procapsids interact with a nucleoprotein complex known as complex I to initiate genome packaging. When complex I is used as a packaging substrate in vitro, capsid utilization is extremely efficient, and 40% of the input DNA is packaged. Finally, we provide evidence for a packaging-stimulated ATPase activity, and kinetically characterize this reaction quantifying the energetic cost of DNA packaging in bacteriophage lambda.

Sequence analysis of bacteriophage T4 DNA packaging/terminase genes 16 and 17 reveals a common ATPase center in the large subunit of viral terminases

Phage DNA packaging is believed to be driven by a rotary device coupled to an ATPase 'motor'. Recent evidence suggests that the phage DNA packaging motor is one of the strongest force-generating molecular motors reported to date. However, the ATPase center that is responsible for generating this force is unknown. In order to identify the DNA translocating ATPase, the sequences of the packaging/terminase genes of coliphages T4 and RB49 and vibriophages KVP40 and KVP20 have been analyzed. Alignment of the terminase polypeptide sequences revealed a number of functional signatures in the terminase genes 16 and 17. Most importantly, the data provide compelling evidence for an ATPase catalytic center in the N-terminal half of the large terminase subunit gp17. An analogous ATPase domain consisting of conserved functional signatures is also identified in the large terminase subunit of other bacteriophages and herpesviruses. Interestingly, the putative terminase ATPase domain exhibits some of the common features found in the ATPase domain of DEAD box helicases. Residues that would be critical for ATPase catalysis and its coupling to DNA packaging are identified. Com binatorial mutagenesis shows that the predicted threonine residues in the putative ATPase coupling motif are indeed critical for function.

The large subunit of bacteriophage lambda's terminase plays a role in DNA translocation and packaging termination

The DNA packaging enzyme of bacteriophage lambda, terminase, is a heteromultimer composed of a small subunit, gpNu1, and a large subunit, gpA, products of the Nu1 and A genes, respectively. The role of terminase in the initial stages of packaging involving the site-specific binding and cutting of the DNA has been well characterized. While it is believed that terminase plays an active role in later post-cleavage stages of packaging, such as the translocation of DNA into the head shell, this has not been demonstrated. Accordingly, we undertook a generalized mutagenesis of lambda's A gene and found ten lethal mutations, nine of which cause post-cleavage packaging defects. All were located in the amino-terminal two-thirds of gpA, separate from the carboxy-terminal region where mutations affecting the protein's endonuclease activity have been found. The mutants fall into five groups according to their packaging phenotypes: (1) two mutants package part of the lambda chromosome, (2) one mutant packages the entire chromosome, but very slowly compared to wild-type, (3) two mutants do not package any DNA, (4) four mutants, though inviable, package the entire lambda chromosome, and (5) one mutant may be defective in both early and late stages of DNA packaging. These results indicate that gpA is actively involved in late stages of packaging, including DNA translocation, and that this enzyme contains separate functional domains for its early and late packaging activities.

The N-terminal ATPase site in the large terminase protein gp17 is critically required for DNA packaging in bacteriophage T4

Double-stranded DNA packaging in bacteriophages is apparently driven by the most powerful molecular motor ever measured. Although it is widely accepted that a translocating ATPase powers the DNA packaging machine, the identity of the ATPase that generates this driving force is unknown. Evidence suggests that the large terminase protein gp17, which possesses two consensus ATP binding motifs and an ATPase activity, is a strong candidate for the translocating ATPase in bacteriophage T4. This hypothesis was tested by a PCR-directed combinatorial mutagenesis approach in which mutant libraries consisting of all possible codon combinations were constructed at the signature residues of the ATP binding motifs. The impact on gp17 function of each randomly selected mutant was evaluated by phenotypic analysis following recombinational transfer into the viral genome. The precise mutation giving rise to a particular phenotype was determined by DNA sequencing. The data showed that the N-terminal ATP binding site I (SRQLGKT(161-167)), but not the ATP binding site II (TAAVEGKS(299-306)), is critical for gp17 function. Even conservative substitutions such as G165A, K166R, and T167A were not tolerated at the GKT signature residues, which are predicted to interact with the ATP substrate. Biochemical analyses of the mutants showed a complete loss of in vitro DNA packaging activity but not the terminase (DNA-cutting) activity. The purified K166G mutant showed a loss of gp17-ATPase activity. The data, for the first time, implicated a specific ATPase center in the viral dsDNA packaging.

Purification and functional characterization of p16, the ATPase of the bacteriophage Phi29 packaging machinery

Bacteriophage Phi29 codes for a protein (p16) that is required for viral DNA packaging both in vivo and in vitro. Co-expression of p16 with the chaperonins GroEL and GroES has allowed its purification in a soluble form. Purified p16 shows a weak ATPase activity that is stimulated by either DNA or RNA, irrespective of the presence of any other viral component. The stimulation of ATPase activity of p16, although induced under packaging conditions, is not dependent of the actual DNA packaging and in this respect the Phi29 enzyme is similar to other viral terminases. Protein p16 competes with DNA and RNA in the interaction with the viral prohead, which occurs through the N-terminal region of the connector protein (p10). In fact, p16 interacts in a nucleotide-dependent fashion with the viral Phi29-encoded RNA (pRNA) involved in DNA packaging, and this binding can be competed with DNA. Our results are consistent with a model for DNA translocation in which p16, bound and organized around the connector, acts as a power stroke to pump the DNA into the prohead, using the hydrolysis of ATP as an energy source.