A brief description of I.C.E.: the integrated crystallographic environment

Image processing of 2D crystal images

Electron crystallography of membrane proteins uses cryo-transmission electron microscopy to image frozen-hydrated 2D crystals. The processing of recorded images exploits the periodic arrangement of the structures in the images to extract the amplitudes and phases of diffraction spots in Fourier space. However, image imperfections require a crystal unbending procedure to be applied to the image before evaluation in Fourier space. We here describe the process of 2D crystal image unbending, using the 2dx software system.

Phosphorylated smooth muscle heavy meromyosin shows an open conformation linked to activation

Smooth muscle myosin and smooth muscle heavy meromyosin (smHMM) are activated by regulatory light chain phosphorylation, but the mechanism remains unclear. Dephosphorylated, inactive smHMM assumes a closed conformation with asymmetric intramolecular head-head interactions between motor domains. The "free head" can bind to actin, but the actin binding interface of the "blocked head" is involved in interactions with the free head. We report here a three-dimensional structure for phosphorylated, active smHMM obtained using electron crystallography of two-dimensional arrays. Head-head interactions of phosphorylated smHMM resemble those found in the dephosphorylated state but occur between different molecules, not within the same molecule. The light chain binding domain structure of phosphorylated smHMM differs markedly from that of the "blocked" head of dephosphorylated smHMM. We hypothesize that regulatory light chain phosphorylation opens the inhibited conformation primarily by its effect on the blocked head. Singly phosphorylated smHMM is not compatible with the closed conformation if the blocked head is phosphorylated. This concept has implications for the extent of myosin activation at low levels of phosphorylation in smooth muscle.

3D reconstruction from 2D crystal image and diffraction data

Electron crystallography of 2D protein crystals can determine the structure of membrane embedded proteins at high resolution. Images or electron diffraction patterns are recorded with the electron microscope of the frozen hydrated samples, and the 3D structure of the proteins is then determined by computer data processing. Here we introduce the image-processing algorithms for crystallographic Fourier space based methods using the Medical Research Council (MRC) programs, and illustrate the usage of the software packages 2dx, XDP, and IPLT.

Application of two-dimensional crystallography and image processing to atomic resolution Z-contrast images

Zone axis images recorded using high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM or Z-contrast imaging) reveal the atomic structure with a resolution that is defined by the probe size of the microscope. In most cases, the full images contain many sub-images of the crystal unit cell and/or interface structure. Thanks to the repetitive nature of these images, it is possible to apply standard image processing techniques that have been developed for the electron crystallography of biological macromolecules and have been used widely in other fields of electron microscopy for both organic and inorganic materials. These methods can be used to enhance the signal-to-noise present in the original images, to remove distortions in the images that arise from either the instrumentation or the specimen itself and to quantify properties of the material in ways that are difficult without such data processing. In this paper, we describe briefly the theory behind these image processing techniques and demonstrate them for aberration-corrected, high-resolution HAADF-STEM images of Si(46) clathrates developed for hydrogen storage.

HIV-1 matrix organizes as a hexamer of trimers on membranes containing phosphatidylinositol-(4,5)-bisphosphate

The human immunodeficiency virus type 1 (HIV-1) matrix (MA) protein represents the N-terminal domain of the HIV-1 precursor Gag (PrGag) protein and carries an N-terminal myristate (Myr) group. HIV-1 MA fosters PrGag membrane binding, as well as assembly of envelope (Env) proteins into virus particles, and recent studies have shown that HIV-1 MA preferentially directs virus assembly at plasma membrane sites enriched in cholesterol and phosphatidylinositol-(4,5)-bisphosphate (PI[4,5]P(2)). To characterize the membrane binding of MA and PrGag proteins, we have examined how Myr-MA proteins, and proteins composed of Myr-MA and its neighbor Gag capsid (CA) protein associate on membranes containing cholesterol and PI[4,5]P(2). Our results indicate that Myr-MA assembles as a hexamer of trimers on such membranes, and imply that MA trimers interconnect CA hexamer rings in immature virus particles. Our observations suggest a model for the organization of PrGag proteins, and for MA-Env protein interactions.

Energetics and geometry of FtsZ polymers: nucleated self-assembly of single protofilaments

Essential cell division protein FtsZ is an assembling GTPase which directs the cytokinetic ring formation in dividing bacterial cells. FtsZ shares the structural fold of eukaryotic tubulin and assembles forming tubulin-like protofilaments, but does not form microtubules. Two puzzling problems in FtsZ assembly are the nature of protofilament association and a possible mechanism for nucleated self-assembly of single-stranded protofilaments above a critical FtsZ concentration. We assembled two-dimensional arrays of FtsZ on carbon supports, studied linear polymers of FtsZ with cryo-electron microscopy of vitrified unsupported solutions, and formulated possible polymerization models. Nucleated self-assembly of FtsZ from Escherichia coli with GTP and magnesium produces flexible filaments 4-6 nm-wide, only compatible with a single protofilament. This agrees with previous scanning transmission electron microscopy results and is supported by recent cryo-electron tomography studies of two bacterial cells. Observations of double-stranded FtsZ filaments in negative stain may come from protofilament accretion on the carbon support. Preferential protofilament cyclization does not apply to FtsZ assembly. The apparently cooperative polymerization of a single protofilament with identical intermonomer contacts is explained by the switching of one inactive monomer into the active structure preceding association of the next, creating a dimer nucleus. FtsZ behaves as a cooperative linear assembly machine.

2dx—User-friendly image processing for 2D crystals

Electron crystallography determines the structure of two-dimensional (2D) membrane protein crystals and other 2D crystal systems. Cryo-transmission electron microscopy records high-resolution electron micrographs, which require computer processing for three-dimensional structure reconstruction. We present a new software system 2dx, which is designed as a user-friendly, platform-independent software package for electron crystallography. 2dx assists in the management of an image-processing project, guides the user through the processing of 2D crystal images, and provides transparence for processing tasks and results. Algorithms are implemented in the form of script templates reminiscent of c-shell scripts. These templates can be easily modified or replaced by the user and can also execute modular stand-alone programs from the MRC software or from other image processing software packages. 2dx is available under the GNU General Public License at 2dx.org.

Human immunodeficiency virus type 1 matrix protein assembles on membranes as a hexamer

The membrane-binding matrix (MA) domain of the human immunodeficiency virus type 1 (HIV-1) structural precursor Gag (PrGag) protein oligomerizes in solution as a trimer and crystallizes in three dimensions as a trimer unit. A number of models have been proposed to explain how MA trimers might align with respect to PrGag capsid (CA) N-terminal domains (NTDs), which assemble hexagonal lattices. We have examined the binding of naturally myristoylated HIV-1 matrix (MyrMA) and matrix plus capsid (MyrMACA) proteins on membranes in vitro. Unexpectedly, MyrMA and MyrMACA proteins both assembled hexagonal cage lattices on phosphatidylserine-cholesterol membranes. Membrane-bound MyrMA proteins did not organize into trimer units but, rather, organized into hexamer rings. Our results yield a model in which MA domains stack directly above NTD hexamers in immature particles, and they have implications for HIV assembly and interactions between MA and the viral membrane glycoproteins.

Assembly of human immunodeficiency virus precursor gag proteins

To investigate the mechanism by which human immunodeficiency virus (HIV) precursor Gag (PrGag) proteins assemble to form immature virus particles, we examined the in vitro assembly of MACANC proteins, composed of the PrGag matrix, capsid, and nucleocapsid domains. In the absence of other components, MACANC proteins assembled efficiently at physiological temperature but inefficiently at lower temperatures. However, the addition of RNA reduced the temperature sensitivity of assembly reactions. Assembly of MACANC proteins also was affected by pH because the proteins preferentially formed tubes at pH 6.0, whereas spheres were obtained at pH 8.0. Because neither tubes nor spheres were amenable to analysis of protein-protein contacts, we also examined the membrane-bound assemblies of MACANC proteins. Interestingly, MACANC proteins organized on membranes in tightly packed hexameric rings. The observed hexamer spacing of 79.7 A is consistent with the notion that more PrGag proteins assemble into virions than are needed to provide capsid proteins for mature virus cores. Our data are also consistent with a model for PrGag contacts in immature virions where capsid hexamers are tightly packed, where nucleocapsid domains align beneath capsid C-terminal domains, and where matrix domains form trimers at the nexus of three neighbor hexamers.

Crystal and electron microscopy structures of sticholysin II actinoporin reveal insights into the mechanism of membrane pore formation

Sticholysin II (StnII) is a pore-forming protein (PFP) produced by the sea anemone Stichodactyla helianthus. We found out that StnII exists in a monomeric soluble state but forms tetramers in the presence of a lipidic interface. Both structures have been independently determined at 1.7 A and 18 A resolution, respectively, by using X-ray crystallography and electron microscopy of two-dimensional crystals. Besides, the structure of soluble StnII complexed with phosphocholine, determined at 2.4 A resolution, reveals a phospholipid headgroup binding site, which is located in a region with an unusually high abundance of aromatic residues. Fitting of the atomic model into the electron microscopy density envelope suggests that while the beta sandwich structure of the protein remains intact upon oligomerization, the N-terminal region and a flexible and highly basic loop undergo significant conformational changes. These results provide the structural basis for the membrane recognition step of actinoporins and unexpected insights into the oligomerization step.

Two-dimensional crystallization of a small heat shock protein HSP16.3 on lipid layer

As a member of small heat shock proteins, HSP16.3 was identified as the major membrane-bound protein of Mycobacterium tuberculosis during stationary phase. Previous studies revealed that HSP16.3 was in a nonameric form in solution. Here, two-dimensional crystal of HSP16.3 molecules on lipid monolayer was obtained for the first time. The crystal exhibited p422 symmetry with lattice parameters a=b=90A, gamma=90 degrees. The projection map of untilted crystals showed that the basic unit of the crystal was a rod-like structure with two high-density regions. The three-dimensional map at 2.2 nm resolution revealed a rod-like structure with a dimension of 56A x 32A x 25A, similar to the dimeric forms of M. jannaschii HSP16.5 and wheat HSP16.9. Cross-linking experiments confirmed that HSP16.3 nonamers dissociated into dimers upon interaction with the positively charged lipid layer. Surface plasmon resonance measurements revealed that both electrostatic and hydrophobic forces involved in the formation of the 2D crystal on the lipid monolayer. These results provide a basis for further investigation on the unique dimeric structure of HSP16.3 and its functions in vivo.

Assembly of archaeal cell division protein FtsZ and a GTPase-inactive mutant into double-stranded filaments

We have studied the assembly and GTPase of purified FtsZ from the hyperthermophilic archaeon Methanococcus jannaschii, a structural homolog of eukaryotic tubulin, employing wild-type FtsZ, FtsZ-His6 (histidine-tagged FtsZ), and the new mutants FtsZ-W319Y and FtsZ-W319Y-His6, with light scattering, nucleotide analyses, electron microscopy, and image processing methods. This has revealed novel properties of FtsZ. The GTPase of archaeal FtsZ polymers is suppressed in Na+-containing buffer, generating stabilized structures that require GDP addition for disassembly. FtsZ assembly is polymorphic. Archaeal FtsZ(wt) assembles into associated and isolated filaments made of two parallel protofilaments with a 43 A longitudinal spacing between monomers, and this structure is also observed in bacterial FtsZ from Escherichia coli. The His6 extension facilitates the artificial formation of helical tubes and sheets. FtsZ-W319Y-His6 is an inactivated GTPase whose assembly remains regulated by GTP and Mg2+. It forms two-dimensional crystals made of symmetrical pairs of tubulin-like protofilaments, which associate in an antiparallel array (similarly to the known Ca2+-induced sheets of FtsZ-His6). In contrast to the lateral interactions of microtubule protofilaments, we propose that the primary assembly product of FtsZ is the double-stranded filament, one or several of which might form the dynamic Z ring during prokaryotic cell division.

Retrovirus capsid protein assembly arrangements

During retrovirus particle assembly and morphogenesis, the retrovirus structural (Gag) proteins organize into two different arrangements: an immature form assembled by precursor Gag (PrGag) proteins; and a mature form, composed of proteins processed from PrGag. Central to both Gag protein arrangements is the capsid (CA) protein, a domain of PrGag, which is cleaved from the precursor to yield a mature Gag protein composed of an N-terminal domain (NTD), a flexible linker region, and a C-terminal domain (CTD). Because Gag interactions have proven difficult to examine in virions, a number of investigations have focused on the analysis of structures assembled in vitro. We have used electron microscope (EM) image reconstruction techniques to examine assembly products formed by two different CA variants of both human immunodeficiency virus type 1 (HIV-1) and the Moloney murine leukemia virus (M-MuLV). Interestingly, two types of hexameric protein arrangements were observed for each virus type. One organizational scheme featured hexamers composed of putative NTD dimer subunits, with sharing of subunits between neighbor hexamers. The second arrangement used apparent NTD monomers to coordinate hexamers, involved no subunit sharing, and employed putative CTD interactions to connect hexamers. Conversion between the two assembly forms may be achieved by making or breaking the proposed symmetric NTD dimer contacts in a process that appears to mimic viral morphogenesis.

EMXtalOrg: an EM tilt data organization and processing system

The EMXtalOrg software package organizes and processes electron microscope (EM) data from indexed images of tilted two-dimensional (2D) protein crystals. The package, which is freely available, was written to facilitate the processing of amplitude and phase (aph) data from 2D EM projections into three-dimensional (3D) reconstructions. The suite takes as input contrast transfer function corrected aph files and generates lattice line data to yield HKL files which can be output for viewing 3D structures with existing data visualization programs. Additionally, the package offers a number of other processing features, and provides a convenient graphical interface for several image processing programs devoted to the analysis of 2D crystals. The package is written in the Python scripting language using the Tcl/ Tk toolkit for the graphical user interface, making it portable and easy to modify by the user. The package provides an integrated environment to simplify the process of obtaining 3D structures from 2D crystals.

Two-dimensional crystal structures of protein kinase C-delta, its regulatory domain, and the enzyme complexed with myelin basic protein

Two-dimensional crystals of protein kinase C (PKC) delta, its regulatory domain (RDdelta), and the enzyme complexed with the substrate myelin basic protein have been grown on lipid monolayers composed of phosphatidylcholine: phosphatidylserine: diolein (45:50:5, molar ratio). Images have been reconstructed to 10-A resolution. The unit cells of all three proteins have cell edges a = b and interedge angle gamma = 60 degrees. RDdelta has an edge length of 33 +/- 1 A, and its reconstruction is donut shaped. The three-dimensional reconstructions from the PKCdelta C1b crystal structure () can be accommodated in this two-dimensional projection. Intact PKCdelta has an edge length of 46 +/- 1 A in the presence or absence of a nonhydrolyzable ATP analog, AMP-PnP. Its reconstruction has a similar donut shape, which can accommodate the C1b domain, but the spacing between donuts is greater than that in RDdelta; some additional structure is visible between the donuts. The complex of PKCdelta and myelin basic protein, with or without AMP-PnP, has an edge length of 43 +/- 1 A and a distinct structure. These results indicate that the C1 domains of RDdelta are tightly packed in the plane of the membrane in the two-dimensional crystals, that there is a single molecule of PKCdelta in the unit cell, and that its interaction with myelin basic protein induces a shift in conformation and/or packing of the enzyme.

Analysis of Rous sarcoma virus capsid protein variants assembled on lipid monolayers

During assembly and morphogenesis of Rous sarcoma virus (RSV), proteolytic processing of the structural precursor (Pr76Gag) protein generates three capsid (CA) protein variants, CA476, CA479, and CA488. The proteins share identical N-terminal domains (NTDs), but are truncated at residues corresponding to gag codons 476, 479, and 488 in their CA C-terminal domains (CTDs). To characterize oligomeric forms of the RSV CA variants, we examined 2D crystals of the capsid proteins, assembled on lipid monolayers. Using electron microscopy and image analysis approaches, the CA proteins were observed to organize in hexagonal (p6) arrangements, where rings of membrane-proximal NTD hexamers were spaced at 95 A intervals. Differences between the oligomeric structures of the CA variants were most evident in membrane-distal regions, where apparent CTDs interconnect hexamer rings. In this region, CA488 connections were observed readily, while CA476 and CA479 contacts were resolved poorly, suggesting that in vivo processing of CA488 to the shorter forms may permit virions to adopt a dissembly-competent conformation. In addition to crystalline arrays, the CA479 and CA488 proteins formed small spherical particles with diameters of 165-175 A. The spheres appear to be arranged from hexamer or hexamer plus pentamer ring subunits that are related to the 2D crystal forms. Our results implicate RSV CA hexamer rings as basic elements in the assembly of RSV virus cores.

Dissociation and subunit rearrangement of membrane-bound human C-reactive proteins

As one of the most important acute-phase reactants in human serum, C-reactive protein plays its physiological roles mainly on membranes. Here we show that the human C-reactive protein is two-dimensionally crystallized upon specific adsorption on the phosphorylcholine ligand containing membranes by monolayer approach. The 2.0-nm resolution projection structure of the two-dimensional crystals analyzed by electron microscopy and image reconstruction reveals open-ring-like pentamers in the crystals. The electron microscope graphs also show that the dissociated pentamers with open-ring-like structure occur in a closed packing region (not two-dimensionally crystallized). These results indicate a membrane-induced dissociation and rearrangement of hCRP, which may relate to the variety of hCRP's physiological functions.

Lipid-layer crystallization and preliminary three-dimensional structural analysis of AcrA, the periplasmic component of a bacterial multidrug efflux pump

The multidrug efflux complex AcrAB-TolC confers intrinsic drug resistance in Escherichia coli by pumping antibiotics out of the cell. We determined a low-resolution (20 A) structure of AcrA, the periplasmic component, by electron crystallography. Expressed with a His-tag at its carboxyl-terminus, the protein bound to lipid layers containing the nickel-chelating phospholipid DOGS-NTA. Under the lipid layers, AcrA crystallized in layer group P2(1)22, with a unit cell size of 157 by 95 A and a thickness of about 100 A. The four asymmetric units in the unit cell are organized into what appears to be two rings, each with a central opening of 30 A in diameter. Within each ring, the density can be interpreted as following a pseudo-helical path, approximately 210 A long. This length matches that of monomeric AcrA in solution, previously estimated by light scattering and hydrodynamic measurements. On one side the density has a tubular shape, with a thickness of about 25 A, while on the other side the densities of the upper and lower parts of the pseudo-helical path are fused into a shield.

Three-dimensional image reconstruction of dephosphorylated smooth muscle heavy meromyosin reveals asymmetry in the interaction between myosin heads and placement of subfragment 2

Regulation of the actin-activated ATPase of smooth muscle myosin II is known to involve an interaction between the two heads that is controlled by phosphorylation of the regulatory light chain. However, the three-dimensional structure of this inactivated form has been unknown. We have used a lipid monolayer to obtain two-dimensional crystalline arrays of the unphosphorylated inactive form of smooth muscle heavy meromyosin suitable for structural studies by electron cryomicroscopy of unstained, frozen-hydrated specimens. The three-dimensional structure reveals an asymmetric interaction between the two myosin heads. The ATPase activity of one head is sterically "blocked" because part of its actin-binding interface is positioned onto the converter domain of the second head. ATPase activity of the second head, which can bind actin, appears to be inhibited through stabilization of converter domain movements needed to release phosphate and achieve strong actin binding. When the subfragment 2 domain of heavy meromyosin is oriented as it would be in an actomyosin filament lattice, the position of the heads is very different from that needed to bind actin, suggesting an additional contribution to ATPase inhibition in situ.

Two-dimensional assembly of pentameric rabbit C-reactive proteins on lipid monolayers

The problem of pentamer packing on a two-dimensional plane is of concern not only in physics and mathematics but also in biology. The packing styles of pentamers may either be related to or reflect the physiological or biochemical properties of biological macromolecules. C-reactive protein (CRP), one of the classical members of the petraxin family, was recently two-dimensionally (2D) crystallized by us on lipid monolayers by specific adsorption (Wang, H. W., and Sui, S. F., 1999, J. Struct. Biol. 127, 283-286). Another type of the protein's 2D crystal under the same conditions was obtained in the present work. The new 2D crystal was studied using electron microscopy of negatively stained specimens followed by image processing. A projection map at 2.2-nm resolution was obtained. The previous 2D crystal (PI) and the current 2D crystal (PII) show different pentamer-packing styles. Both of them are closely related to the fivefold symmetry of the molecule itself. The coexistence and the spatial contiguity of the two types of pentamer assembly were observed in a visual field. The fivefold symmetrical macromolecule can form a pentiling pattern on a two-dimensional plane, which has never been reported in biological system before. The possible mechanism of the two-dimensional assembly of pentameric CRP on lipid monolayers is discussed.

Characterization of Rous sarcoma virus Gag particles assembled in vitro

Purified retrovirus Gag proteins or Gag protein fragments are able to assemble into virus-like particles (VLPs) in vitro in the presence of RNA. We have examined the role of nucleic acid and of the NC domain in assembly of VLPs from a Rous sarcoma virus (RSV) Gag protein and have characterized these VLPs using transmission electron microscopy (TEM), scanning TEM (STEM), and cryoelectron microscopy (cryo-EM). RNAs of diverse sizes, single-stranded DNA oligonucleotides as small as 22 nucleotides, double-stranded DNA, and heparin all promoted efficient assembly. The percentages of nucleic acid by mass, in the VLPs varied from 5 to 8%. The mean mass of VLPs, as determined by STEM, was 6.5 x 10(7) Da for both RNA-containing and DNA oligonucleotide-containing particles, corresponding to a stoichiometry of about 1,200 protein molecules per VLP, slightly lower than the 1,500 Gag molecules estimated previously for infectious RSV. By cryo-EM, the VLPs showed the characteristic morphology of immature retroviruses, with discernible regions of high density corresponding to the two domains of the CA protein. In spherically averaged density distributions, the mean radial distance to the density corresponding to the C-terminal domain of CA was 33 nm, considerably smaller than that of equivalent human immunodeficiency virus type 1 particles. Deletions of the distal portion of NC, including the second Zn-binding motif, had little effect on assembly, but deletions including the charged residues between the two Zn-binding motifs abrogated assembly. Mutation of the cysteine and histidine residues in the first Zn-binding motif to alanine did not affect assembly, but mutation of the basic residues between the two Zn-binding motifs, or of the basic residues in the N-terminal portion of NC, abrogated assembly. Together, these findings establish VLPs as a good model for immature virions and establish a foundation for dissection of the interactions that lead to assembly.

Three-dimensional organization of retroviral capsid proteins on a lipid monolayer

We have used a method for the two-dimensional crystallization of retroviral structural proteins to obtain a three-dimensional structure of negatively stained, membrane-bound, histidine-tagged Moloney murine leukemia virus (M-MuLV) capsid protein (his-MoCA) arrays. Tilted and untilted micrographs from crystals formed by purified his-MoCA proteins incubated beneath lipid monolayers containing nickel-chelating lipids were used in 3D reconstructions. The 2D crystals had unit cell dimensions of a=72.6 A, b=72.5 A and gamma=119.5 degrees, but appeared to have no intrinsic symmetry (p1) in 3D, in contrast to the trigonal or hexagonal appearance of their 2D projections. Membrane-bound his-MoCA proteins showed a strand-like organization, apparently with dimer building blocks. Membrane-proximal regions, or putative N-terminal domains (NTDs), dimerized with different partners than the membrane-distal putative C-terminal domains (CTDs). Evidence also suggests that CTDs can adopt alternate orientations relative to their NTDs, forming interstrand connections. Our results are consistent with helical-spiral models for retrovirus particle assembly, but are not easily reconcilable with icosahedral models.

Assembly of retrovirus capsid-nucleocapsid proteins in the presence of membranes or RNA

Retrovirus Gag precursor (PrGag) proteins direct the assembly of roughly spherical immature virus particles, while after proteolytic processing events, the Gag capsid (CA) and nucleocapsid (NC) domains condense on viral RNAs to form mature retrovirus core structures. To investigate the process of retroviral morphogenesis, we examined the properties of histidine-tagged (His-tagged) Moloney murine leukemia (M-MuLV) capsid plus nucleocapsid (CANC) (His-MoCANC) proteins in vitro. The His-MoCANC proteins bound RNA, possessed nucleic acid-annealing activities, and assembled into strand, circle (or sphere), and tube forms in the presence of RNA. Image analysis of electron micrographs revealed that tubes were formed by cage-like lattices of CANC proteins surrounding at least two different types of protein-free cage holes. By virtue of a His tag association with nickel-chelating lipids, His-MoCANC proteins also assembled into planar sheets on lipid monolayers, mimicking the membrane-associated immature PrGag protein forms. Membrane-bound His-MoCANC proteins organized into two-dimensional (2D) cage-like lattices that were closely related to the tube forms, and in the presence of both nickel-chelating lipids and RNAs, 2D lattice forms appeared similar to lattices assembled in the absence of RNA. Our observations are consistent with a M-MuLV morphogenesis model in which proteolytic processing of membrane-bound Gag proteins permits CA and NC domains to rearrange from an immature spherical structure to a condensed mature form while maintaining local protein-protein contacts.

Two-dimensional crystallization on lipid monolayers and three-dimensional structure of sticholysin II, a cytolysin from the sea anemone Stichodactyla helianthus

Sticholysin II (Stn II), a potent cytolytic protein isolated from the sea anemone Stichodactyla helianthus, has been crystallized on lipid monolayers. With Fourier-based methods, a three-dimensional (3D) model of Stn II, up to a resolution of 15 A, has been determined. The two-sided plane group is p22(1)2, with dimensions a = 98 A, b = 196 A. The 3D model of Stn II displays a Y-shaped structure, slightly flattened, with a small curvature along its longest dimension (51 A). This protein, with a molecular mass of 19. 2 kDa, is one of the smallest structures reconstructed with this methodology. Two-dimensional (2D) crystals of Stn II on phosphatidylcholine monolayers present a unit cell with two tetrameric motifs, with the monomers in two different orientations: one with its longest dimension lying on the crystal plane and the other with this same axis leaning at an angle of approximately 60 degrees with the crystal plane.

Membrane-bound 3D structures reveal the intrinsic flexibility of annexin VI

Several quasi-ordered arrays and three two-dimensional crystal forms of annexin VI were obtained on artificial lipid monolayers. Three-dimensional reconstructions of the crystal forms exhibit marked differences in the orientations of the two lobes, revealing flexibility of the linker between the two lobes of annexin VI. Evidence is presented that the lobes may bind the monolayer in a parallel orientation, or an antiparallel orientation, in which the second lobe is turned away from the monolayer. It is hypothesized that annexin VI may also adopt several conformations in vivo, underlying different functional roles.

Trimeric ring-like structure of ArsA ATPase

ArsA protein is the soluble subunit of the Ars anion pump in the Escherichia coli membrane which extrudes arsenite or antimonite from the cytoplasm. The molecular weight of the subunit is 63 kDa. In the cell it hydrolyzes ATP, and the energy released is used by the membrane-bound subunit ArsB to transport the substrates across the membrane. We have obtained two-dimensional crystals of ArsA in the presence of arsenite on negatively-charged lipid monolayer composed of DMPS and DOPC. These crystals have been studied using electron microscopy of negatively-stained specimens followed by image processing. The projection map obtained at 2.4 nm resolution reveals a ring-like structure with threefold symmetry. Many molecular assemblies with the same ring-shape and dimensions were also seen dispersed on electron microscopy grids, prepared directly from purified ArsA protein solution. Size-exclusion chromatography of the protein sample with arsenite present revealed that the majority of the protein particles in solution have a molecular weight of about 180 kDa. Based on these experiments, we conclude that in solution the ArsA ATPase with substrate bound is mainly in a trimeric form.

Electron crystallographic methods for investigating gap junction structure

Gap junctions are clusters of closely packed intercellular membrane channels embedded in the plasma membranes of two adjoining cells. The central pore of the membrane channels serves as a conduit between cell cytoplasms for molecules less than 1000 Da in size. Advances in the purification of gap junctions and electron cryocrystallography and computer reconstruction techniques have produced new insights into the intercellular channel structure. Methods are described here for the purification of gap junction membranes, biochemical treatments to produce hemichannel layers ("split junctions"), assessment of the purity of gap junction preparations, electron cryomicroscopy, image processing and reconstruction, three-dimensional visualization, and interpretation. The critical step in electron crystallographic structure determination remains the isolation of crystalline material in sufficient and pure quantities for recording of electron microscope images. Along with sodium dodecyl sulfate-polyacrylamide gel electrophoresis and Western blotting, the quality of gap junction purification is assessed using electron microscopy of negatively stained preparations. Electron microscopy is also used to assess the crystallinity of the purified gap junctions and split junctions. Electron cryocrystallography is a powerful technique for high-resolution structural characterization. Image processing is used to combine and enhance two-dimensional images. Electron crystallographic analysis is used to generate a three-dimensional structure from a set of electron micrographs. This three-dimensional information is extracted from a set of images recorded after tilting the specimen in the electron microscope stage and recombined using Fourier analysis techniques analogous to those used in X-ray crystallography. Computer modeling of the three-dimensional gap junction structures is a useful tool for analyzing hemichannel docking.

Visualization of head-head interactions in the inhibited state of smooth muscle myosin

The structural basis for the phosphoryla- tion-dependent regulation of smooth muscle myosin ATPase activity was investigated by forming two- dimensional (2-D) crystalline arrays of expressed unphosphorylated and thiophosphorylated smooth muscle heavy meromyosin (HMM) on positively charged lipid monolayers. A comparison of averaged 2-D projections of both forms at 2.3-nm resolution reveals distinct structural differences. In the active, thiophosphorylated form, the two heads of HMM interact intermolecularly with adjacent molecules. In the unphosphorylated or inhibited state, intramolecular interactions position the actin-binding interface of one head onto the converter domain of the second head, thus providing a mechanism whereby the activity of both heads could be inhibited.

Formation of helical protein assemblies of IgG and transducin on varied lipid tubules

Helical protein arrays on lipid tubules are valuable assemblies for studying protein structure and protein-lipid interactions through electron microscopy and crystallography. We describe conditions for forming such arrays from two proteins, IgG and transducin, the photoreceptor G protein, using a variety of lipid surfaces. Anti-dinitrophenyl (DNP) IgG arrays formed on DNP-phosphatidylethanolamine (DNP-PE) mixed with either galactosyl-ceramide lipids or phosphatidylcholine (PC) display different pH sensitivities and dimensions, yet have similar helical symmetries. DNP-PE/PC mixtures formed small crystals and large well-ordered flattened tubules. The peripheral membrane protein transducin (G(t)) formed helical arrays either on a mixture of cationic and neutral lipids or on residual photoreceptor lipids. Despite differences in lipid composition, the G(t) arrays have similar structures and show similar sensitivity to activation and variations in ionic environment. G(t) activation causes the helical assemblies to collapse to small vesicles, a process resembling the vesiculation of activated dynamin-lipid tubules. In a preliminary three-dimensional reconstruction, the hapten-bound IgG appears to make two contacts to the central lipid tubule, presumably via the F(ab) domains. The ability to generate a three-dimensional reconstruction without tilts illustrates one advantage of helical structures for two-dimensional crystallography, especially for visualizing protein-lipid interactions.

Pentameric two-dimensional crystallization of rabbit C-reactive protein on lipid monolayers

As a member of the pentraxin family, C-reactive protein plays various roles in the nonspecific immunity of animals. Though soluble, C-reactive protein always functions on membranes. In order to study the structure of the membrane-bound protein and the reaction between protein and membranes, two-dimensional (2D) crystallization of rabbit C-reactive protein on lipid monolayers was performed. The 2D crystals composed of pentameric proteins were obtained on lipid monolayers by specific adsorption for the first time. The projection map at 26-A resolution is presented, which exhibits P2 symmetry with lattice parameters a = 158(+/-3) A, b = 92(+/-1) A, and gamma = 107(+/-1) degrees. The current work may give a basis for the further study on the structure of complexes made up of C-reactive protein with its functional binding molecules on membranes.

The three-dimensional structure of a DNA translocating machine at 10 A resolution

BACKGROUND

Head-tail connectors are viral substructures that are very important in the viral morphogenetic cycle, having roles in the formation of the precursor capsid (prohead), DNA packaging, tail binding to the mature head and in the infection process. Structural information on the connector would, therefore, help us to understand how this structure is related to a multiplicity of functions.

RESULTS

Recombinant bacteriophage phi29 connectors have been crystallized in two-dimensional aggregates. An average projection image and a three-dimensional map have been obtained at 8 A and 10 A resolution, respectively, from untilted and tilted images of vitrified specimens of the two-dimensional crystals. The average projection image reveals a central mass surrounding a channel with 12 appendages protruding from the central mass. The three-dimensional map reveals a wide domain surrounded by 12 appendages that interact with the prohead vertex, and a narrow domain that interacts with the bacteriophage tail. At the junction of the two domains, 12 smaller appendages are visualized. A channel runs along the axis of the connector structure and is sufficiently wide to allow a double-stranded DNA molecule to pass through.

CONCLUSIONS

The propeller-like structure of the phi29 connector strengthens the notion of the connector rotating during DNA packaging. The groove formed by the two lanes of large and small appendages may act as a rail to prevent the liberation of the connector from the prohead vertex during rotation.

The vacuolating toxin from Helicobacter pylori forms hexameric pores in lipid bilayers at low pH

Pathogenic strains of Helicobacter pylori secrete a cytotoxin, VacA, that in the presence of weak bases, causes osmotic swelling of acidic intracellular compartments enriched in markers for late endosomes and lysosomes. The molecular mechanisms by which VacA causes this vacuolation remain largely unknown. At neutral pH, VacA is predominantly a water-soluble dodecamer formed by two apposing hexamers. In this report, we show by using atomic force microscopy that below pH approximately 5, VacA associates with anionic lipid bilayers to form hexameric membrane-associated complexes. We propose that water-soluble dodecameric VacA proteins disassemble at low pH and reassemble into membrane-spanning hexamers. The surface contour of the membrane-bound hexamer is strikingly similar to the outer surface of the soluble dodecamer, suggesting that the VacA surface in contact with the membrane is buried within the dodecamer before protonation. In addition, electrophysiological measurements indicate that, under the conditions determined by atomic force microscopy for membrane association, VacA forms pores across planar lipid bilayers. This low pH-triggered pore formation is likely a critical step in VacA activity.

Reduction of charging in protein electron cryomicroscopy

Charging causes a loss of resolution in electron cryomicroscopy with biological specimens prepared without a continuous carbon support film. Thin conductive films were deposited onto catalase crystals prepared across holes using ion-beam sputtering and thermal evaporation and evaluated for the effectiveness of charge reduction. Deposits applied by ion-beam sputtering reduced charging but concurrently resulted in structural damage. Coatings applied by thermal evaporation also reduced charging, and preserved the specimen structure beyond 5 A resolution as judged from electron diffraction patterns and images of glucose-embedded catalase crystals tilted to 45 degrees in the microscope. This study demonstrates for the first time the feasibility of obtaining high-resolution data from unstained, unsupported protein crystals with a conductive surface coating.

Electron crystallographic analysis of two-dimensional streptavidin crystals coordinated to metal-chelated lipid monolayers

Coordination of individual histidine residues located on a protein surface to metal-chelated lipid monolayers is a potentially general method for crystallizing proteins in two dimensions. It was shown recently by Brewster angle microscopy (BAM) that the model protein streptavidin binds via its surface histidines to Cu-DOIDA lipid monolayers, and aggregates into regularly shaped domains that have the appearance of crystals. We have used electron microscopy to confirm that the domains are indeed crystalline with lattice parameters similar to those of the same protein crystallized beneath biotinylated lipid monolayers. Although BAM demonstrates that the two-dimensional protein crystals grown via metal chelation are distinct from the biotin-bound crystals in both microscopic shape and thermodynamic behavior, the two crystal types show similar density projections and the same plane group symmetry.

Organization of HIV-1 capsid proteins on a lipid monolayer

In an in vitro system that mimics the assembly of immature human immunodeficiency virus (HIV) particles, ordered arrays of HIV-1 capsid (CA) proteins encoded by the viral gag gene have been obtained by incubation of histidine-tagged capsid proteins (His-HIVCA) beneath lipid monolayers containing the nickel-chelating lipid, 1,2-di-O-hexadecyl-sn-glycero-3-(1'-2"-R-hydroxy-3'-N-(5-amino-1- carboxypentyl)iminodiacetic acid)propyl ether. The membrane-bound His-HIVCA proteins formed small crystalline arrays of primitive (p1) unit cells with dimensions of a = 74.2 A, b = 126.2 A, gamma = 89.3 degrees. The image-analyzed two-dimensional projection of His-HIVCA assemblies shows a cage-like lattice, consisting of hexamer and trimer units, surrounding protein-free cage holes. The hexamer-coordinated cage holes of 26.3-A diameter are spaced at 74. 2-A intervals: these distances, and the hexamer-trimer arrangement, are consistent with previous, lower resolution studies on immature HIV-1 virus particles produced in vivo. Additionally, HIV-1 matrix protein trimer unit structures align to the His-HIVCA trimer units such that residues previously shown to interact with the HIV-1 gp120/gp41 envelope protein complex are oriented toward the hexamer cage holes. Our results form a bridge between results from conventional methods for the analysis of HIV particle structure.

Identification of the sites of interaction between the scaffold and outer shell in herpes simplex virus-1 capsids by difference electron imaging

Formation of herpes simplex virus-1 capsids requires the presence of intact scaffolding proteins. The C terminus of the abundant scaffolding protein associates with the major capsid shell protein VP5 through hydrophobic interactions. After cleavage by the viral encoded protease, which removes their C-terminal 25 aa, the scaffolding proteins are released from the capsid. We have used electron cryomicroscopy and computer image processing to determine, to 13 A, the three-dimensional structures of capsids containing either cleaved or uncleaved scaffolding proteins. Detailed comparisons show that the structures of the outer icosahedral shells are almost identical in the two capsid types. Differences are apparent in the radial distribution of the density inside the capsid shell (within a radius of 460 ) which represents the scaffolding core. However, in both capsid types, the bulk of this internal density exhibits no icosahedral symmetry. Close examination revealed localized regions of icosahedrally arranged extra density at the interface between the outer shell and the scaffold of protease-minus capsids. Rod-like densities extending inwards for approximately 40 from the capsid shell are present under four of the six quasi-equivalent triplex positions. Under triplexes Tb, Tc, and Te, the major additional densities appear as pairs with the rods in each pair situated 37 apart. We propose that these rods are formed by the C-termini of the scaffolding proteins and represent the sites of interaction between the capsid shell and scaffold.

Two-dimensional crystals of protein kinase C

Three two-dimensional (2D) crystal forms of protein kinase C (PKC) alpha and three of PKC delta have been grown on lipid monolayers composed of dioleoylphosphatidylcholine: dioleoylphosphatidylserine: (45:50:5 molar ratio). In the absence of DO, two additional 2D crystals of PKC delta are seen, suggesting that the presence of diolein (DO) alters the conformation of intact PKC at the lipid surface. Reconstructions of electron micrographs of these eight lattices show good reproducibility and indicate that several are appropriate for three-dimensional reconstruction to 20 A resolution.

A strategy for electron tomographic data collection and crystallographic reconstruction of biological bundles

Structures of highly ordered biological bundles have unique features which call for special experimental and computational methods in electron cryomicroscopy. They can be considered as three-dimensional quasi-crystals and reconstructed using a crystallographic approach. However, they are neither "infinitely" large with respect to the borders of the bundle, nor are they a single unit cell in thickness along the viewing direction. Also, because of their shape, bundles do not generally have a preferred azimuthal orientation, which poses challenges for orientation estimation and refinement. We developed a strategy for recording and processing electron cryomicroscopic images that differs from classical two-dimensional crystalline reconstruction techniques. These developments allowed us to merge data from tomographic tilt series of ice-embedded acrosomal bundles. The goal is to determine accurately amplitudes and phases at the diffraction maxima in terms of hkl indices, and compute a three-dimensional map from the diffraction data.

The yeast spindle pole body is assembled around a central crystal of Spc42p

The spindle pole body (SPB) is the microtubule organizing center (MTOC) in the yeast Saccharomyces that plays a pivotal role in such diverse processes as mitosis, budding, and mating. We have used cryoelectron microscopy and image processing to study the structure of isolated diploid SPBs. We show that SPBs are present in two lateral-size classes, sharing a similar vertical architecture comprised of six major layers. Tomographic reconstructions of heparin-stripped SPBs reveal a central hexagonally packed layer. Overexpression of Spc42p results in the growth of a similar layer, forming a crystal that encircles the SPB. Hence, the SPB is an MTOC that utilizes crystallographic packing of subunits in its construction.

Molecular resolution imaging of macromolecular crystals by atomic force microscopy

Atomic force microscopy (AFM) images at the molecular level have been obtained for a number of different protein and virus crystals. They can be utilized in some special cases to obtain information useful to crystal structure analyses by x-ray diffraction. In particular, questions of space group enantiomer, the packing of molecules within a unit cell, the number of molecules per asymmetric unit, and the dispositions of multiple molecules within the asymmetric unit may be resolved. In addition, because of the increasing sensitivity and resolution of the AFM technique, some molecular features of very large asymmetric units may be within reach. We describe here high-resolution studies, using AFM, to visualize individual molecules and viruses in their crystal lattices. These investigations included fungal lipase, lysozyme, thaumatin, canavalin, and satellite tobacco mosaic virus (STMV).