Fot1, a new family of fungal transposable elements

Revisiting the Tigger Transposon Evolution Revealing Extensive Involvement in the Shaping of Mammal Genomes

Simple Summary

Despite the discovery of the Tigger family of pogo transposons in the mammalian genome, the evolution profile of this family is still incomplete. Here, we conducted a systematic evolution analysis for Tigger in nature. The data revealed that Tigger was found in a broad variety of animals, and extensive invasion of Tigger was observed in mammal genomes. Common horizontal transfer events of Tigger elements were observed across different lineages of animals, including mammals, that may have led to their widespread distribution, while parasites and invasive species may have promoted Tigger HT events. Our results also indicate that the activity of Tigger transposons tends to be low in vertebrates; only one mammalian genome and fish genome may harbor active Tigger.

Abstract

The data of this study revealed that Tigger was found in a wide variety of animal genomes, including 180 species from 36 orders of invertebrates and 145 species from 29 orders of vertebrates. An extensive invasion of Tigger was observed in mammals, with a high copy number. Almost 61% of those species contain more than 50 copies of Tigger; however, 46% harbor intact Tigger elements, although the number of these intact elements is very low. Common HT events of Tigger elements were discovered across different lineages of animals, including mammals, that may have led to their widespread distribution, whereas Helogale parvula and arthropods may have aided Tigger HT incidences. The activity of Tigger seems to be low in the kingdom of animals, most copies were truncated in the mammal genomes and lost their transposition activity, and Tigger transposons only display signs of recent and current activities in a few species of animals. The findings suggest that the Tigger family is important in structuring mammal genomes.

Diversity and Evolution of pogo and Tc1/mariner Transposons in the Apoidea Genomes

Bees (Apoidea), the largest and most crucial radiation of pollinators, play a vital role in the ecosystem balance. Transposons are widely distributed in nature and are important drivers of species diversity. However, transposons are rarely reported in important pollinators such as bees. Here, we surveyed 37 bee genomesin Apoidea, annotated the pogo and Tc1/mariner transposons in the genome of each species, and performed a phylogenetic analysis and determined their overall distribution. The pogo and Tc1/mariner families showed high diversity and low abundance in the 37 species, and their proportion was significantly higher in solitary bees than in social bees. DD34D/mariner was found to be distributed in almost all species and was found in Apis mellifera, Apis mellifera carnica, Apis mellifera caucasia, and Apis mellifera mellifera, and Euglossa dilemma may still be active. Using horizontal transfer analysis, we found that DD29-30D/Tigger may have experienced horizontal transfer (HT) events. The current study displayed the evolution profiles (including diversity, activity, and abundance) of the pogo and Tc1/mariner transposons across 37 species of Apoidea. Our data revealed their contributions to the genomic variations across these species and facilitated in understanding of the genome evolution of this lineage.

The IS630/Tc1/mariner transposons in three ctenophore genomes

Transposable elements (TEs) exert a significant effect on the structure and functioning of the genomes and also serve as a source of the new genes. The study of the TE diversity and evolution in different taxa is indispensable for the fundamental understanding of their roles in the genomes. IS630/Tc1/mariner (ITm) transposable elements represent the most prevalent and diverse group of DNA transposons. In this work, we studied the diversity, evolutionary dynamics and the phylogenetic relationships of the ITm transposons found in three ctenophore species: Mnemiopsis leidyi, Pleurobrachia bachei, Beroe ovata. We identified 29 ITm transposons, seven of which possess the terminal inverted repeats (TIRs) and an intact transposase, and, thus, are, presumably, active. Four other ITm transposons have the features of domesticated TEs. According to the results of the phylogenetic analysis, the ITm transposons of the ctenophores represent five groups - MLE/DD34D, TLE/DD34-38E, mosquito/DD37E, Visiror/DD41D and pogo/DDxD. Pogo/DDxD superfamily turnes out to be the most diverse and prevalent, since it accounts for more than 40% of the TEs identified. The data obtained in this research will fill the gap of knowledge of the diversity and evolution of the ITm transposons in the multicellular genomes and will lay the ground for the study of the TE effects on the evolution of the ctenophores.

Evolution of pogo, a separate superfamily of IS630-Tc1-mariner transposons, revealing recurrent domestication events in vertebrates

BACKGROUND

Tc1/mariner and Zator, as two superfamilies of IS630-Tc1-mariner (ITm) group, have been well-defined. However, the molecular evolution and domestication of pogo transposons, once designated as an important family of the Tc1/mariner superfamily, are still poorly understood.

RESULTS

Here, phylogenetic analysis show that pogo transposases, together with Tc1/mariner, DD34E/Gambol, and Zator transposases form four distinct monophyletic clades with high bootstrap supports (> = 74%), suggesting that they are separate superfamilies of ITm group. The pogo superfamily represents high diversity with six distinct families (Passer, Tigger, pogoR, Lemi, Mover, and Fot/Fot-like) and wide distribution with an expansion spanning across all the kingdoms of eukaryotes. It shows widespread occurrences in animals and fungi, but restricted taxonomic distribution in land plants. It has invaded almost all lineages of animals-even mammals-and has been domesticated repeatedly in vertebrates, with 12 genes, including centromere-associated protein B (CENPB), CENPB DNA-binding domain containing 1 (CENPBD1), Jrk helix-turn-helix protein (JRK), JRK like (JRKL), pogo transposable element derived with KRAB domain (POGK), and with ZNF domain (POGZ), and Tigger transposable element-derived 2 to 7 (TIGD2-7), deduced as originating from this superfamily. Two of them (JRKL and TIGD2) seem to have been co-domesticated, and the others represent independent domestication events. Four genes (TIGD3, TIGD4, TIGD5, and POGZ) tend to represent ancient domestications in vertebrates, while the others only emerge in mammals and seem to be domesticated recently. Significant structural variations including target site duplication (TSD) types and the DDE triad signatures (DD29-56D) were observed for pogo transposons. Most domesticated genes are derived from the complete transposase genes; but CENPB, POGK, and POGZ are chimeric genes fused with additional functional domains.

CONCLUSIONS

This is the first report to systematically reveal the evolutionary profiles of the pogo transposons, suggesting that pogo and Tc1/Mariner are two separate superfamilies of ITm group, and demonstrating the repeated domestications of pogo in vertebrates. These data indicate that pogo transposons have played important roles in shaping the genome and gene evolution of fungi and animals. This study expands our understanding of the diversity of pogo transposons and updates the classification of ITm group.

An Analysis of IS630/Tc1/mariner Transposons in the Genome of a Pacific Oyster, Crassostrea gigas

Transposable elements represent the DNA fragments capable of increasing their copy number and moving within the genome. Class II mobile elements represents the DNA transposons, which transpose via excision and the subsequent reinsertion at random genomic loci. The increase of their copy number occurs only when the transposition event is coupled with the replication. IS630/Tc1/mariner DNA transposon superfamily is one of the largest and widely distributed among the Class II elements. In this work, we provide a detailed analysis of IS630/Tc1/mariner DNA transposons from the Pacific oyster, Crassostrea gigas. IS630/Tc1/mariner transposons represented in the genome of the Pacific oyster belong to four families, Tc1 (DD34E), mariner (DD34D), pogo (DDxD), and rosa (DD41D). More than a half of IS630/Tc1/mariner elements from C. gigas belong to Tc1 family. Furthermore, Mariner-31_CGi element was shown to represent a new and previously unknown family with DD37E signature. We also discovered the full-size transcripts of eight elements from Tc1, mariner, and pogo families, three of which can, presumably, retain their transposition activity.

Transposable Element Genomic Fissuring in Pyrenophora teres Is Associated With Genome Expansion and Dynamics of Host-Pathogen Genetic Interactions

Pyrenophora teres, P. teres f. teres (PTT) and P. teres f. maculata (PTM) cause significant diseases in barley, but little is known about the large-scale genomic differences that may distinguish the two forms. Comprehensive genome assemblies were constructed from long DNA reads, optical and genetic maps. As repeat masking in fungal genomes influences the final gene annotations, an accurate and reproducible pipeline was developed to ensure comparability between isolates. The genomes of the two forms are highly collinear, each composed of 12 chromosomes. Genome evolution in P. teres is characterized by genome fissuring through the insertion and expansion of transposable elements (TEs), a process that isolates blocks of genic sequence. The phenomenon is particularly pronounced in PTT, which has a larger, more repetitive genome than PTM and more recent transposon activity measured by the frequency and size of genome fissures. PTT has a longer cultivated host association and, notably, a greater range of host-pathogen genetic interactions compared to other Pyrenophora spp., a property which associates better with genome size than pathogen lifestyle. The two forms possess similar complements of TE families with Tc1/Mariner and LINE-like Tad-1 elements more abundant in PTT. Tad-1 was only detectable as vestigial fragments in PTM and, within the forms, differences in genome sizes and the presence and absence of several TE families indicated recent lineage invasions. Gene differences between P. teres forms are mainly associated with gene-sparse regions near or within TE-rich regions, with many genes possessing characteristics of fungal effectors. Instances of gene interruption by transposons resulting in pseudogenization were detected in PTT. In addition, both forms have a large complement of secondary metabolite gene clusters indicating significant capacity to produce an array of different molecules. This study provides genomic resources for functional genetics to help dissect factors underlying the host-pathogen interactions.

Genome-wide identification and evolution of TC1/Mariner in the silkworm (Bombyx mori) genome

TC1/Mariner transposons belong to class II transposable elements (TEs) that use DNA-mediated "cut and paste" mechanism to transpose, and they have been identified in almost all organisms. Although silkworm (Bombyx mori) has a large amount of TC1/Mariner elements, the genome wide information of this superfamily in the silkworm is unknown. In this study, we have identified 2670 TC1/Mariner (Bmmar) elements in the silkworm genome. All the TEs were classified into 22 families by means of fgclust, a tool of repetitive sequence classification, seven of which was first reported in this study. Phylogenetic and structure analyses based on the catalytic domain (DDxD/E) of transposase sequences indicated that all members of TC1/Mariner were grouped into five subgroups: Mariner, Tc1, maT, DD40D and DD41D/E. Of these five subgroups, maT rather than Mariner possessed most members of TC1/Mariner (51.23%) in the silkworm genome. In particular, phylogenetic analysis and structure analysis revealed that Bmmar15 (DD40D) formed a new basal subgroup of TC1/Mariner element in insects, which was referred to as bmori. Furthermore, we concluded that DD40D appeared to intermediate between mariner and Tc1. Finally, we estimated the insertion time for each copy of TC1/Mariner in the silkworm and found that most of members were dramatically amplified during a period from 0 to 1 mya. Moreover, the detailed functional data analysis showed that Bmmar1, Bmmar6 and Bmmar9 had EST evidence and intact transposases. These implied that TC1/Mariner might have potential transpositional activity. In conclusion, this study provides some new insights into the landscape, origin and evolution of TC1/Mariner in the insect genomes.

Characterization of autonomous families of Tc1/mariner transposons in neoteleost genomes

We report the comprehensive analysis of Tc1/mariner transposons in six species of neoteleost (cod, tetraodon, fugu, medaka, stickleback, and tilapia) for which draft sequences are available. In total, 33 Tc1/mariner families were identified in these neoteleost genomes, with 3-7 families in each species. Thirty of these are in full length and designed as autonomous families, and were classified into the DD34E (Tc1) and DD×D (pogo) groups. The DD34E (Tc1) group was further classified into five clusters (Passport-like, SB-like, Frog Prince-like, Minos-like, and Bari-like). Within the genomes of cod, tetraodon, fugu, and stickleback, the Tc1/mariner DNA transposons exhibit very low proliferation with <1% of genome. In contrast, medaka and tilapia display high accumulation of Tc1/mariner transposons with 2.91% and 5.09% of genome coverages, respectively. Divergence analysis revealed that most identified Tc1/mariner transposons have undergone one round of recent accumulation, followed by a decrease in activity. One family in stickleback (Tc1_6_Ga) exhibits a very recent and strong expansion, which suggests that this element is a very young invader and putatively active. The structural organization of these Tc1/mariner elements is also described. Generally, the Tc1/mariner transposons display a high diversity and varied abundance in the neoteleost genomes with current and recent activity.

Sequence Assembly of Yarrowia lipolytica Strain W29/CLIB89 Shows Transposable Element Diversity

Yarrowia lipolytica, an oleaginous yeast, is capable of accumulating significant cellular mass in lipid making it an important source of biosustainable hydrocarbon-based chemicals. In spite of a similar number of protein-coding genes to that in other Hemiascomycetes, the Y. lipolytica genome is almost double that of model yeasts. Despite its economic importance and several distinct strains in common use, an independent genome assembly exists for only one strain. We report here a de novo annotated assembly of the chromosomal genome of an industrially-relevant strain, W29/CLIB89, determined by hybrid next-generation sequencing. For the first time, each Y. lipolytica chromosome is represented by a single contig. The telomeric rDNA repeats were localized by Irys long-range genome mapping and one complete copy of the rDNA sequence is reported. Two large structural variants and retroelement differences with reference strain CLIB122 including a full-length, novel Ty3/Gypsy long terminal repeat (LTR) retrotransposon and multiple LTR-like sequences are described. Strikingly, several of these are adjacent to RNA polymerase III-transcribed genes, which are almost double in number in Y. lipolytica compared to other Hemiascomycetes. In addition to previously-reported dimeric RNA polymerase III-transcribed genes, tRNA pseudogenes were identified. Multiple full-length and truncated LINE elements are also present. Therefore, although identified transposons do not constitute a significant fraction of the Y. lipolytica genome, they could have played an active role in its evolution. Differences between the sequence of this strain and of the existing reference strain underscore the utility of an additional independent genome assembly for this economically important organism.

Evidence of ectopic recombination and a repeat-induced point (RIP) mutation in the genome of Sclerotinia sclerotiorum, the agent responsible for white mold

Two retrotransposons from the superfamilies Copia and Gypsy named as Copia-LTR_SS and Gypsy-LTR_SS, respectively, were identified in the genomic bank of Sclerotinia sclerotiorum. These transposable elements (TEs) contained direct and preserved long terminal repeats (LTR). Domains related to codified regions for gag protein, integrase, reverse transcriptase and RNAse H were identified in Copia-LTR_SS, whereas in Gypsy-LTR_SS only domains for gag, reverse transcriptase and RNAse H were found. The abundance of identified LTR-Solo suggested possible genetic recombination events in the S. sclerotiorum genome. Furthermore, alignment of the sequences for LTR elements from each superfamily suggested the presence of a RIP (repeat-induced point mutation) silencing mechanism that may directly affect the evolution of this species.

Minos as a novel Tc1/mariner-type transposable element for functional genomic analysis in Aspergillus nidulans

Transposons constitute powerful genetic tools for gene inactivation, exon or promoter trapping and genome analyses. The Minos element from Drosophila hydei, a Tc1/mariner-like transposon, has proved as a very efficient tool for heterologous transposition in several metazoa. In filamentous fungi, only a handful of fungal-specific transposable elements have been exploited as genetic tools, with the impala Tc1/mariner element from Fusarium oxysporum being the most successful. Here, we developed a two-component transposition system to manipulate Minos transposition in Aspergillus nidulans (AnMinos). Our system allows direct selection of transposition events based on re-activation of niaD, a gene necessary for growth on nitrate as a nitrogen source. On average, among 10(8) conidiospores, we obtain up to ∼0.8×10(2) transposition events leading to the expected revertant phenotype (niaD(+)), while ∼16% of excision events lead to AnMinos loss. Characterized excision footprints consisted of the four terminal bases of the transposon flanked by the TA target duplication and led to no major DNA rearrangements. AnMinos transposition depends on the presence of its homologous transposase. Its frequency was not significantly affected by temperature, UV irradiation or the transcription status of the original integration locus (niaD). Importantly, transposition is dependent on nkuA, encoding an enzyme essential for non-homologous end joining of DNA in double-strand break repair. AnMinos proved to be an efficient tool for functional analysis as it seems to transpose in different genomic loci positions in all chromosomes, including a high proportion of integration events within or close to genes. We have used Minos to obtain morphological and toxic analogue resistant mutants. Interestingly, among morphological mutants some seem to be due to Minos-elicited over-expression of specific genes, rather than gene inactivation.

Structural and functional characterization of the Colletotrichum lindemuthianum nit1 gene, which encodes a nitrate eductase enzyme

Colletotrichum lindemuthianum is the causal agent of plant bean anthracnose, one of the most important diseases affecting the common bean. We investigated the structure and expression of the nit1 gene (nitrate reductase) of C. lindemuthianum. The nit1 gene open reading frame contains 2787 bp, interrupted by a single 69-bp intron. The predicted protein has 905 amino acids; it shows high identity with the nitrate reductase of C. higginsianum (79%) and C. graminicola (73%). Expression of nit1 in C. lindemuthianum was evaluated in mycelia grown on different nitrogen sources under conditions of activation and repression. The gene was expressed after 15 min of induction with nitrate, reaching maximum expression at 360 min. The transcription was repressed in mycelia grown in media enriched with ammonia, urea or glutamine. Twenty nit1⁻ mutants were obtained in a medium treated with chlorate. Ten of these mutants were characterized by DNA hybridization, which identified point mutations, a deletion and an insertion. These rearrangements in the nit1 gene in the different mutants may have occurred through activity of transposable elements.

Transposable elements in phytopathogenic Verticillium spp.: insights into genome evolution and inter- and intra-specific diversification

Background

Verticillium dahliae (Vd) and Verticillium albo-atrum (Va) are cosmopolitan soil fungi causing very disruptive vascular diseases on a wide range of crop plants. To date, no sexual stage has been identified in either microorganism suggesting that somatic mutation is a major force in generating genetic diversity. Whole genome comparative analysis of the recently sequenced strains VdLs.17 and VaMs.102 revealed that non-random insertions of transposable elements (TEs) have contributed to the generation of four lineage-specific (LS) regions in VdLs.17.

Results

We present here a detailed analysis of Class I retrotransposons and Class II “cut-and-paste” DNA elements detected in the sequenced Verticillium genomes. We report also of their distribution in other Vd and Va isolates from various geographic origins. In VdLs.17, we identified and characterized 56 complete retrotransposons of the Gypsy-, Copia- and LINE-like types, as well as 34 full-length elements of the “cut-and-paste” superfamilies Tc1/mariner, Activator and Mutator. While Copia and Tc1/mariner were present in multiple identical copies, Activator and Mutator sequences were highly divergent. Most elements comprised complete ORFs, had matching ESTs and showed active transcription in response to stress treatment. Noticeably, we found evidences of repeat-induced point mutation (RIP) only in some of the Gypsy retroelements. While Copia-, Gypsy- and Tc1/mariner-like transposons were prominent, a large variation in presence of the other types of mobile elements was detected in the other Verticillium spp. strains surveyed. In particular, neither complete nor defective “cut-and-paste” TEs were found in VaMs.102.

Conclusions

Copia-, Gypsy- and Tc1/mariner-like transposons are the most wide-spread TEs in the phytopathogens V. dahliae and V. albo-atrum. In VdLs.17, we identified several retroelements and “cut-and-paste” transposons still potentially active. Some of these elements have undergone diversification and subsequent selective amplification after introgression into the fungal genome. Others, such as the ripped Copias, have been potentially acquired by horizontal transfer. The observed biased TE insertion in gene-rich regions within an individual genome (VdLs.17) and the “patchy” distribution among different strains point to the mobile elements as major generators of Verticillium intra- and inter-specific genomic variation.

Molecular identification of two vegetative compatibility groups of Fusarium oxysporum f. sp. cepae

Fusarium oxysporum f. sp. cepae, which causes basal rot of onion, consists of seven vegetative compatibility groups (VCGs 0420 to 0426) and several single-member VCGs (SMVs). F. oxysporum f. sp. cepae populations in South Africa and Colorado each consist of one main VCG (namely, VCG 0425 and 0421, respectively). The aim of this study was to develop sequence-characterized amplified region (SCAR) markers for the identification of VCGs 0425 and 0421, using 79 previously characterized F. oxysporum isolates. A second aim was to investigate the prevalence of VCG 0425 among 88 uncharacterized South African onion F. oxysporum isolates using (i) the developed SCAR markers and (ii) inter-retrotransposon (IR)- and random amplified polymorphic DNA (RAPD) fingerprinting. Only two RAPD primers provided informative fingerprints for VCG 0425 isolates but these could not be developed into SCAR markers, although they provided diagnostic fragments for differentiation of VCG 0425 from VCG 0421. IR fingerprinting data were used to develop a multiplex IR-SCAR polymerase chain reaction method for the identification of VCG 0421, VCG 0425, and SMV 4 isolates as a group. Molecular identification of the uncharacterized collection of 88 F. oxysporum isolates (65 F. oxysporum f. sp. cepae and 23 F. oxysporum isolates nonpathogenic to onion) confirmed that VCG 0425 is the main VCG in South Africa, with all but 3 of the 65 F. oxysporum f. sp. cepae isolates having the molecular characteristics of this VCG. Genotyping and VCG testing showed that two of the three aforementioned isolates were new SMVs (SMV 6 and SMV 7), whereas the third (previously known as SMV 3) now belongs to VGC 0247.

Genome-wide comparative analysis of pogo-like transposable elements in different Fusarium species

The recent availability of genome sequences of four different Fusarium species offers the opportunity to perform extensive comparative analyses, in particular of repeated sequences. In a recent work, the overall content of such sequences in the genomes of three phylogenetically related Fusarium species, F. graminearum, F. verticillioides, and F. oxysporum f. sp. lycopersici has been estimated. In this study, we present an exhaustive characterization of pogo-like elements, named Fots, in four Fusarium genomes. Overall 10 Fot and two Fot-related miniature inverted-repeat transposable element families were identified, revealing a diversification of multiple lineages of pogo-like elements, some of which accompanied by a gain of introns. This analysis also showed that such elements are present in an unusual high proportion in the genomes of F. oxysporum f. sp. lycopersici and Nectria haematococca (anamorph F. solani f. sp. pisi) in contrast with most other fungal genomes in which retroelements are the most represented. Interestingly, our analysis showed that the most numerous Fot families all contain potentially active or mobilisable copies, thus conferring a mutagenic potential of these transposable elements and consequently a role in strain adaptation and genome evolution. This role is strongly reinforced when examining their genomic distribution which is clearly biased with a high proportion (more than 80%) located on strain- or species-specific regions enriched in genes involved in pathogenicity and/or adaptation. Finally, the different reproductive characteristics of the four Fusarium species allowed us to investigate the impact of the process of repeat-induced point mutations on the expansion and diversification of Fot elements.

De novo assembly of a 40 Mb eukaryotic genome from short sequence reads: Sordaria macrospora, a model organism for fungal morphogenesis

Filamentous fungi are of great importance in ecology, agriculture, medicine, and biotechnology. Thus, it is not surprising that genomes for more than 100 filamentous fungi have been sequenced, most of them by Sanger sequencing. While next-generation sequencing techniques have revolutionized genome resequencing, e.g. for strain comparisons, genetic mapping, or transcriptome and ChIP analyses, de novo assembly of eukaryotic genomes still presents significant hurdles, because of their large size and stretches of repetitive sequences. Filamentous fungi contain few repetitive regions in their 30-90 Mb genomes and thus are suitable candidates to test de novo genome assembly from short sequence reads. Here, we present a high-quality draft sequence of the Sordaria macrospora genome that was obtained by a combination of Illumina/Solexa and Roche/454 sequencing. Paired-end Solexa sequencing of genomic DNA to 85-fold coverage and an additional 10-fold coverage by single-end 454 sequencing resulted in approximately 4 Gb of DNA sequence. Reads were assembled to a 40 Mb draft version (N50 of 117 kb) with the Velvet assembler. Comparative analysis with Neurospora genomes increased the N50 to 498 kb. The S. macrospora genome contains even fewer repeat regions than its closest sequenced relative, Neurospora crassa. Comparison with genomes of other fungi showed that S. macrospora, a model organism for morphogenesis and meiosis, harbors duplications of several genes involved in self/nonself-recognition. Furthermore, S. macrospora contains more polyketide biosynthesis genes than N. crassa. Phylogenetic analyses suggest that some of these genes may have been acquired by horizontal gene transfer from a distantly related ascomycete group. Our study shows that, for typical filamentous fungi, de novo assembly of genomes from short sequence reads alone is feasible, that a mixture of Solexa and 454 sequencing substantially improves the assembly, and that the resulting data can be used for comparative studies to address basic questions of fungal biology.

DNA transposons: nature and applications in genomics

Repeated DNA makes up a large fraction of a typical mammalian genome, and some repetitive elements are able to move within the genome (transposons and retrotransposons). DNA transposons move from one genomic location to another by a cut-and-paste mechanism. They are powerful forces of genetic change and have played a significant role in the evolution of many genomes. As genetic tools, DNA transposons can be used to introduce a piece of foreign DNA into a genome. Indeed, they have been used for transgenesis and insertional mutagenesis in different organisms, since these elements are not generally dependent on host factors to mediate their mobility. Thus, DNA transposons are useful tools to analyze the regulatory genome, study embryonic development, identify genes and pathways implicated in disease or pathogenesis of pathogens, and even contribute to gene therapy. In this review, we will describe the nature of these elements and discuss recent advances in this field of research, as well as our evolving knowledge of the DNA transposons most widely used in these studies.

Identification of virulence genes in Fusarium oxysporum f. sp. lycopersici by large-scale transposon tagging

Forward genetic screens are efficient tools for the dissection of complex biological processes, such as fungal pathogenicity. A transposon tagging system was developed in the vascular wilt fungus Fusarium oxysporum f. sp. lycopersici by inserting the novel modified impala element imp160::gfp upstream of the Aspergillus nidulans niaD gene, followed by transactivation with a constitutively expressed transposase. A collection of 2072 Nia(+) revertants was obtained from reporter strain T12 and screened for alterations in virulence, using a rapid assay for invasive growth on apple slices. Seven strains exhibited reduced virulence on both apple slices and intact tomato plants. Five of these were true revertants showing the re-insertion of imp160::gfp within or upstream of predicted coding regions, whereas the other two showed either excision without re-insertion or no excision. Linkage between imp160::gfp insertion and virulence phenotype was determined in four transposon-tagged loci using targeted deletion in the wild-type strain. Knockout mutants in one of the genes, FOXG_00016, displayed significantly reduced virulence, and complementation of the original revertant with the wild-type FOXG_00016 allele fully restored virulence. FOXG_00016 has homology to the velvet gene family of A. nidulans. The high rate of untagged virulence mutations in the T12 reporter strain appears to be associated with increased genetic instability, possibly as a result of the transactivation of endogenous transposable elements by the constitutively expressed transposase.

Evolution of virulence in Fusarium oxysporum f. sp. vasinfectum using serial passage assays through susceptible cotton

Fifty strains of Fusarium oxysporum, recovered from rhizosphere soil around native Gossypium species and found to be mildly virulent on cotton (Gossypium hirsutum), were used to assay the propensity for evolution of virulence using serial passage assays through cotton. Only one lineage A strain, 2613, successfully completed 10 successive passages, while all others lost the ability to cause foliar disease symptoms at various stages during this process. Based on 46 amplified fragment length polymorphism (AFLP) markers generated with four EcoRI x MseI primer combinations, mutants were identified in offspring isolates from strain 2613 regardless of whether serial passages occurred in cotton or on water agar, suggesting the occurrence of spontaneous mutations. Significantly increased virulence was observed in the offspring isolates generated on cotton, while no increasing virulence was found in those obtained on water agar, suggesting that the evolution of virulence in F. oxysporum f. sp. vasinfectum is associated with the presence of cotton. No clear correlation was observed between the AFLP mutations and increased virulence in this study.

Genomic and evolutionary analyses of Tango transposons in Aedes aegypti, Anopheles gambiae and other mosquito species

Tango is a transposon of the Tc1 family and was originally discovered in the African malaria mosquito, Anopheles gambiae. Here we report a systematic analysis of the genome sequence of the yellow fever mosquito, Aedes aegypti, which uncovered three distinct Tango transposons. We name the only An. gambiae Tango transposon AgTango1 and the three Ae. aegypti Tango elements AeTango1-3. Like AgTango1, AeTango1 and AeTango2 elements both have members that retain characteristics of autonomous elements such as intact open reading frames and terminal inverted repeats (TIRs). AeTango3 is a degenerate transposon with no full-length members. All full-length Tango transposons contain subterminal direct repeats within their TIRs. AgTango1 and AeTango1-3 form a single clade among other Tc1 transposons. Within this clade, AgTango1 and AeTango1 are closely related and share approximately 80% identity at the amino acid level, which exceeds the level of similarity of the majority of host genes in the two species. A survey of Tango in other mosquito species was carried out using degenerate PCR. Tango was isolated and sequenced in all members of the An. gambiae species complex, Aedes albopictus and Ochlerotatus atropalpus. Oc. atropalpus contains a rich diversity of Tango elements, while Tango elements in Ae. albopictus and the An. gambiae species complex all belong to Tango1. No Tango was detected in Culex pipiens quinquefasciatus, Anopheles stephensi, Anopheles dirus, Anopheles farauti or Anopheles albimanus using degenerate PCR. Bioinformatic searches of the Cx. p. quinquefasciatus (~10 x coverage) and An. stephensi (0.33 x coverage) databases also failed to uncover any Tango elements. Although other evolutionary scenarios cannot be ruled out, there are indications that Tango1 underwent horizontal transfer among divergent mosquito species.

Characterization of three DNA transposons in the Dutch elm disease fungi and evidence of repeat-induced point (RIP) mutations

Transposable elements (TEs) are fundamental components of eukaryotic genomes and can contribute in various ways to genome plasticity and evolution. We describe here the first three DNA transposons in the Dutch elm disease (DED) pathogens Ophiostoma ulmi and O. novo-ulmi, named OPHIO1, OPHIO2 and OPHIO3. We demonstrate that OPHIO transposons, which show high homology to Fot1/pogo TEs within the Tc1/mariner superfamily, have different distribution patterns and specificity in the DED fungi and that interspecific hybrids could act as genetic bridges for transmission of TEs between closely related fungal species. OPHIO3 was found to have undergone repeat-induced point mutations (RIP). We have also developed a complementary method to Margolin's ratios based on the computation of cumulative transition scores (CTS) in order to visualize rapidly RIP signatures on individual DNA strands of OPHIO transposons and TEs found in other ascomycete fungi.

Transposition of a fungal miniature inverted-repeat transposable element through the action of a Tc1-like transposase

The mimp1 element previously identified in the ascomycete fungus Fusarium oxysporum has hallmarks of miniature inverted-repeat transposable elements (MITEs): short size, terminal inverted repeats (TIRs), structural homogeneity, and a stable secondary structure. Since mimp1 has no coding capacity, its mobilization requires a transposase-encoding element. On the basis of the similarity of TIRs and target-site preference with the autonomous Tc1-like element impala, together with a correlated distribution of both elements among the Fusarium genus, we investigated the ability of mimp1 to jump upon expression of the impala transposase provided in trans. Under these conditions, we present evidence that mimp1 transposes by a cut-and-paste mechanism into TA dinucleotides, which are duplicated upon insertion. Our results also show that mimp1 reinserts very frequently in genic regions for at least one-third of the cases. We also show that the mimp1/impala double-component system is fully functional in the heterologous species F. graminearum, allowing the development of a highly efficient tool for gene tagging in filamentous fungi.

Colletotrichum sublineolum genetic instability assessed by mutants resistant to chlorate

The fungus Colletotrichum sublineolum, causal agent of sorghum anthracnose, presents high variability, genetic instability and host specialization. The aims of the present work were to investigate the mechanisms involved in the genetic instability in this species. Mutants resistant to chlorate and unable to use nitrate (Nit mutants), were obtained spontaneously, isolated and characterized for complementation pattern, reversion frequency and RAPD profile. The results showed that chlorate-resistant mutants could be divided into six phenotypic classes that probably represented mutations in the structural nitrate reductase locus (nit1), in the structural nitrite reductase locus (nit6 and niiA of Neurospora and Aspergillus, respectively), in the specific regulator locus (nit3), in the main regulator locus (nit2), in loci that codified the cofactor containing molybdenum necessary for nitrate reductase activity (NitM), and one or more genes responsible for nitrate intake (crn). In addition, the genetic control of this metabolism in C. sublineolum seems to be similar to other fungi species such as Aspergillus, Neurospora and Fusarium. The high reversion frequency (10(-4) to 10(-5)) presented by nit1 mutants suggests that the instability in evaluated strains could be a result of transposable elements activity. The RAPD analysis enabled confirmation that the Nit mutants have a similar genetic background to original strain, and that polymorphism exists among wild-type strains, nit1 mutants and revertants of C. sublineolum. These are important aspects for the later direction of molecular analysis, where these mutants will be used as a tool to isolate the active transposable elements in the C. sublineolum genome.

Identification of genes up-regulated during conidiation of Fusarium oxysporum through expressed sequence tag analysis

Fusarium oxysporum produces three kinds of asexual spores, microconidia, macroconidia, and chlamydospores. F. oxysporum produces microconidia and macroconidia in carboxymethyl cellulose-added liquid medium (CMCLM) and exhibits vegetative growth without conidiation in complete liquid medium (CLM). The cDNA libraries were constructed using mRNAs from CLM and CMCLM cultures. A total of 1288 and 1353 clones from CLM (vegetative growth) and CMCLM (conidiation) libraries, respectively, were sequenced, and 641 and 626 unique genes were identified. Of these unique genes, only 130 ( approximately 20%) were common in the two libraries, indicating different patterns of gene expression during vegetative growth and conidiation. The expression levels of 496 CMCLM-specific genes were compared during vegetative growth and conidiation by cDNA dot-blot differential hybridization and real-time quantitative PCR analyses, and 42 genes were identified to display >5-fold increases in mRNA abundance during conidiation. These genes provide ideal candidates for further studies directed at understanding fungal conidiogenesis and its molecular regulation.

Taf1: a class II transposon of Aspergillus fumigatus

Aspergillus fumigatus is an important medical pathogen that lacks a known sexual cycle. Transposons may provide an important mechanism for the generation of genetic diversity in this organism. Here, we describe Taf1, the first class II transposon to be identified in A. fumigatus. Taf1, a member of the mariner superfamily and pogo family of transposons, is distinguished by the presence of extremely long (89 bp) inverted repeats that flank the transposase coding sequence. Taf1 is present in different locations and copy number among clinical strains of A. fumigatus and is transcribed. Analysis of multiple insertion sequences within a single strain suggests that Taf1 elements undergo inactivation by a repeat induced polymorphism-like mechanism. Taf1 insertion patterns were extremely stable despite multiple stressors including heat shock, serial passage, and infection in mice. Thus Taf1 may be useful for strain identification and molecular typing.

Mating type loci of Sporisorium reilianum: novel pattern with three a and multiple b specificities

Sporisorium reilianum and Ustilago maydis are two closely related smut fungi, which both infect maize but differ fundamentally in their mode of plant invasion and site of symptom development. As a prelude to studying the molecular basis of these differences, we have characterized the mating type loci of S. reilianum. S. reilianum has two unlinked mating type loci, a and b. Genes in both loci and adjacent regions show a high degree of synteny to the corresponding genes of U. maydis. The b locus occurs in at least five alleles and encodes two subunits of a heterodimeric homeodomain transcription factor, while the a locus encodes a pheromone/receptor system. However, in contrast to that of U. maydis, the a locus of S. reilianum exists in three alleles containing two active pheromone genes each. The alleles of the a locus appear to have arisen through recent recombination events within the locus itself. This has created a situation where each pheromone is specific for recognition by only one mating partner.

hATpin, a family of MITE-like hAT mobile elements conserved in diverse plant species that forms highly stable secondary structures

We identified a 178 bp mobile DNA element in lettuce with characteristic CGAGC/GCTCG repeats in the subterminal regions. This element has terminal inverted repeats and 8-bp target site duplications typical of the hAT superfamily of class II mobile elements, but its small size and potential to form a single-stranded stable hairpin-like secondary structure suggest that it is related to MITE elements. In silico searches for related elements identified 252 plant sequences with 8-bp target site duplications and sequence similarity in their terminal and subterminal regions. Some of these sequences were predicted to encode transposases and may be autonomous elements; these constituted a separate clade within the phylogram of hAT transposases. We demonstrate that the CGAGC/GCTCG pentamer maximizes the hairpin stability compared to any other pentamer with the same C + G content, and the secondary structures of these elements are more stable than for most MITEs. We named these elements collectively as hATpin elements because of the hAT similarity and their hairpin structures. The nearly complete rice genome sequence and the highly advanced genome annotation allowed us to localize most rice elements and to deduce insertion preferences. hATpin elements are distributed on all chromosomes, but with significant bias for chromosomes 1 and 10 and in regions of moderate gene density. This family of class II mobile elements is found primarily in monocot species, but is also present in dicot species.

Drifter, a novel, low copy hAT-like transposon in Fusarium oxysporum is activated during starvation

The facultative pathogenic fungus Fusarium oxysporum is known to harbour many different transposable and/or repetitive elements. We have identified Drifter, a novel DNA transposon of the hAT family in F. oxysporum. It was found adjoining SIX1-H, a truncated homolog of the SIX1 avirulence gene in F. oxysporum f. sp. lycopersici. Absence of a target site duplication as well as the 5' part of SIX1-H suggests that transposition of Drifter into the ancestor of SIX1-H was followed by loss of a chromosomal segment through recombination between Drifters. F. oxysporum isolates belonging to various formae speciales harbour between 0 and 5 full-length copies of Drifter and/or one or more copies with an internal deletion. Transcription of Drifter is activated during starvation for carbon or nitrogen.

Unexpected Diversity and Differential Success of DNA Transposons in Four Species of Entamoeba Protozoans

We report the first comprehensive analysis of transposable element content in the compact genomes (approximately 20 Mb) of four species of Entamoeba unicellular protozoans for which draft sequences are now available. Entamoeba histolytica and Entamoeba dispar, two human parasites, have many retrotransposons, but few DNA transposons. In contrast, the reptile parasite Entamoeba invadens and the free-living Entamoeba moshkovskii contain few long interspersed elements but harbor diverse and recently amplified populations of DNA transposons. Representatives of three DNA transposase superfamilies (hobo/Activator/Tam3, Mutator, and piggyBac) were identified for the first time in a protozoan species in addition to a variety of members of a fourth superfamily (Tc1/mariner), previously reported only from ciliates and Trichomonas vaginalis among protozoans. The diversity of DNA transposons and their differential amplification among closely related species with similar compact genomes are discussed in the context of the biology of Entamoeba protozoans.

Characterization, regulation, and phylogenetic analyses of thePenicillium griseoroseumnitrate reductase gene and its use as selection marker for homologous transformation

Penicillium griseoroseum has been studied because of its efficient pectinases production. In this work, the Penicillium griseoroseum nitrate reductase gene was characterized, transcriptionaly analyzed in different nitrogen sources, and used to create a phylogenetic tree and to develop a homologous transformation system. The regulatory region contained consensus signals involved in nitrogen metabolism and the structural region was possibly interrupted by 6 introns coding for a deduced protein with 864 amino acids. RT–PCR analysis revealed high amounts of niaD transcript in the presence of nitrate. Transcription was repressed by ammonium, urea, and glutamine showing an efficient turnover of the niaD mRNA. Phylogenetics analysis showed distinct groups clearly separated in accordance with the classical taxonomy. A mutant with a 122-bp deletion was used in homologous transformation experiments and showed a transformation frequency of 14 transformants/µg DNA. All analyzed transformants showed that both single- and double-crossover recombination occurred at the niaD locus. The establishment of this homologous transformation system is an essential step for the improvement of pectinase production in Penicillium griseoroseum.Key words: nitrate reductase, nitrogen metabolism, Penicillium griseoroseum, phylogenetic analysis, homologous transformation.

Stepwise Evolution of Races in Fusarium oxysporum f. sp. ciceris Inferred from Fingerprinting with Repetitive DNA Sequences

ABSTRACT Plant pathogens often exhibit variation in virulence, the ability to cause disease on host plants with specific resistance, evident from the diversity of races observed within pathogen species. The evolution of races in asexual fungal pathogens has been hypothesized to occur in a stepwise fashion, in which mutations to virulence accumulate sequentially in clonal lineages, resulting in races capable of overcoming multiple host plant resistance genes or multiple resistant cultivars. In this study, we demonstrate a simple stepwise pattern of race evolution in Fusarium oxysporum f. sp. ciceris, the fungus that causes Fusarium wilt of chickpeas. The inferred intraspecific phylogeny of races in this fungus, based on DNA fingerprinting with repetitive sequences, shows that each of the eight races forms a monophyletic lineage. By mapping virulence to each differential cultivar (used for defining races) onto the inferred phylogeny, we show that virulence has been acquired in a simple stepwise pattern, with few parallel gains or losses. Such a clear pattern of stepwise evolution of races, to our knowledge, has not been demonstrated previously for other pathogens based on analyses of field populations. We speculate that in other systems the stepwise pattern is obscured by parallel gains or losses of virulence caused by higher mutation rates and selection by widespread deployment of resistant cultivars. Although chickpea cultivars resistant to Fusarium wilt are available, their deployment has not been extensive and the stepwise acquisition of virulence is still clearly evident.

Transposable elements in filamentous fungi

The past 10 years have been productive in the characterization of fungal transposable elements (TEs). All eukaryotic TEs described are found including an extraordinary prevalence of active members of the pogo family. The role of TEs in mutation and genome organization is well documented, leading to significant advances in our perception of the mechanisms underlying genetic changes in these organisms. TE-mediated changes, associated with transposition and recombination, provide a broad range of genetic variation, which is useful for natural populations in their adaptation to environmental constraints, especially for those lacking the sexual stage. Interestingly, some fungal species have evolved distinct silencing mechanisms that are regarded as host defense systems against TEs. The examination of forces acting on the evolutionary dynamics of TEs should provide important insights into the interactions between TEs and the fungal genome. Another issue of major significance is the practical applications of TEs in gene tagging and population analysis, which will undoubtedly facilitate research in systematic biology and functional genomics.

Heterologous transposition in Ustilago maydis

The phytopathogenic basidiomycete Ustilago maydis has become a model system for the analysis of plant-pathogen interactions. The genome sequence of this organism will soon be available, increasing the need for techniques to analyse gene function on a broad basis. We describe a heterologous transposition system for U. maydis that is based on the Caenorhabditis transposon Tc1, which is known to function independently of host factors and to be active in evolutionarily distant species. We have established a nitrate reductase based two-component counterselection system to screen for Tc1 transposition. The element was shown to be functional and transposed to several different locations in the genome of U. maydis. The insertion pattern observed was consistent with the proposed general mechanism of Tc1/mariner integration and constitutes a proof of principle for the first heterologous transposition system in a basidiomycete species. By mapping the insertion site context to known genomic sequences, Tc1 insertion events were shown to occur on different chromosomes, but exhibit a preference for non-coding regions. Only 20% of the insertions were found in putative open reading frames. The establishment of this system will permit efficient gene tagging in U. maydis and possibly also in other fungi.

Construction of a mitotic linkage map of Fusarium oxysporum based on Foxy-AFLPs

Construction of the first mitotic linkage map of the asexual fungus Fusarium oxysporum, based on a population of 32 parasexual fusion products, is reported. Molecular markers were developed using a modified AFLP technique which combines a Foxy-specific primer with standard adapter primers. The retroposon Foxy is abundantly present and highly variable in location in F. oxysporum isolates: 43% of the Foxy-AFLP markers tested appeared to be polymorphic between the strains Fol004 and Fol029. Of the 102 Foxy markers obtained, 83 segregated in a 1:1 ratio. The remaining fragments showed a skewed segregation pattern in which the Fol004 derived Foxy fragments were overrepresented. Foxy markers were observed to be clustered, suggesting that active Foxy elements may not transpose very far from their initial insertion sites, or that hotspots for insertion may exist. Linkage analysis revealed 23 linkage groups. Physical linkage between segregating markers predicted to be 20 cM apart was confirmed, indicating that the mitotic linkage map is reliable.

Molecular genetic variability of Australian isolates of five cereal rust pathogens

Rust fungi cause economically important diseases of cereals, and their ability to rapidly evolve new virulent races has hindered attempts to control them by genetic resistance. PCR-based molecular tools may assist in understanding the genetic structure of pathogen populations. The high multiplex DNA fingerprinting techniques, amplified fragment length polymorphisms (AFLP), selectively amplified microsatellites (SAM) and sequence-specific amplification polymorphisms (S-SAP) were assessed for their potential in investigations of the genetic relationships among isolates of the wheat rust pathogens, Puccinia graminis f. sp. tritici (Pgt), Puccinia triticina (Pt), and P. striiformis f. sp. tritici (Pst), the oat stem rust pathogen P. graminis f. sp. avenae (Pga), and a putative new P. striiformis special form tentatively designated Barley grass yellow rust (Bgyr). Marker information content, as indicated by the number of species-specific fragments, polymorphic fragments among pathotypes, percentage of polymorphic loci, and the marker index, was highest for the SAM assay, followed by the AFLP and S-SAP assays. UPGMA analysis revealed that all marker types efficiently discriminated the five different taxa and Mantel tests revealed significant correlations between the marker types. Within pathogen groups, the marker types differed in the amount of variation detected among isolates; however, the major differences were consistent and polymorphism was generally low. This was reflected by the AMOVA analysis that significantly partitioned 90% of the genetic variation between taxa. Of the three marker types, SAMS were the most informative, and have the potential for the development of locus-specific microsatellites.

What's in the genome of a filamentous fungus? Analysis of the Neurospora genome sequence

The German Neurospora Genome Project has assembled sequences from ordered cosmid and BAC clones of linkage groups II and V of the genome of Neurospora crassa in 13 and 12 contigs, respectively. Including additional sequences located on other linkage groups a total of 12 Mb were subjected to a manual gene extraction and annotation process. The genome comprises a small number of repetitive elements, a low degree of segmental duplications and very few paralogous genes. The analysis of the 3218 identified open reading frames provides a first overview of the protein equipment of a filamentous fungus. Significantly, N.crassa possesses a large variety of metabolic enzymes including a substantial number of enzymes involved in the degradation of complex substrates as well as secondary metabolism. While several of these enzymes are specific for filamentous fungi many are shared exclusively with prokaryotes.

Occan, a novel transposon in the Fot1 family, is ubiquitously found in several Magnaporthe grisea isolates

We investigated a DNA fragment and its flanking region deleted in the spontaneous Pi-a virulent mutant of Magnaporthe grisea Ina168. A new transposon-like sequence was identified from a region adjacent to the deleted fragment and was named Occan. Occan contained a 2,259-bp ORF interrupted by one 63-bp intron and had both a TA dinucleotide and 77 bp of perfect inverted repeats at both termini, without direct repeats. These features indicated that Occan is a member of the Fot1 family. RT-PCR analysis confirmed the expression of the putative transposase and the presence of an intron. Southern analysis of pulse-field gel electrophoresis-separated chromosomes indicated that Occan was dispersed in all chromosomes of the rice pathogen, Ina168. Copy numbers of Occan were also preserved in a host-specific manner amongst M. grisea isolates. In particular, rice pathogens contained a large number of the element inserted into their genome. Phylogenetic analysis with other known members of the Fot1 family revealed that Occan was dissimilar to any other known elements and it is thus proposed that Occan be separated to a new subfamily.

Chromosome-based molecular characterization of pathogenic and non-pathogenic wheat isolates of Pyrenophora tritici-repentis

The ToxA gene of Pyrenophora tritici-repentis encodes a host-selective toxin (Ptr ToxA) that has been shown to confer pathogenicity when used to transform a non-pathogenic wheat isolate. Major karyotype polymorphisms between pathogenic and non-pathogenic strains, and to a lesser extent among pathogenic strains, and among non-pathogenic strains were identified. ToxA was localized to a 3.0 Mb chromosome. PCR-based subtraction was carried out with the ToxA chromosome as tester DNA and genomic DNA from a non-pathogenic isolate as driver DNA. Seven of 8 single-copy probes that originated from the 3.0 Mb chromosome could be assigned to a 2.75 Mb chromosome of a non-pathogenic isolate. Nine different repetitive DNA probes originated from the 3.0 Mb chromosome, including sequences that correspond to known fungal transposable elements. Two additional single-copy probes that originated from a 3.4 Mb chromosome were unique to the pathogens and they correspond to a peptide synthetase gene. Our findings suggest substantial differences between pathogenic and non-pathogenic isolates of P. tritici-repentis.

Recovery of Fusarium oxysporum Fo47 Mutants Affected in Their Biocontrol Activity After Transposition of the Fot1 Element

ABSTRACT To investigate the biocontrol mechanisms by which the antagonistic Fusarium oxysporum strain Fo47 is active against Fusarium wilt, a Fot1 transposon-mediated insertional mutagenesis approach was adopted to generate mutants affected in their antagonistic activity. Ninety strains in which an active Fot1 copy had transposed were identified with a phenotypic assay for excision and tested for their biocontrol activity against F. oxysporum f. sp. lini on flax in greenhouse experiments. Sixteen strains were affected in their capacity to protect flax plants, either positively (more antagonistic than Fo47) or negatively (less antagonistic). The molecular characterization of these mutants confirms the excision of Fot1 and its reinsertion in most of the cases. Moreover, we demonstrate that other transposable elements such as Fot2, impala, and Hop have no transposition activity in the mutant genomes. The phenotypic characterization of these mutants shows that they are affected neither in their in vitro growth habit nor in their competitiveness in soil compared with wild-type strain Fo47. These results show that mutants are not impaired in their saprophytic phase and suggest that the altered biocontrol phenotype should likely be expressed during the interaction with the host plant.

Evolution of the Fot1 transposons in the genus Fusarium: discontinuous distribution and epigenetic inactivation

To understand the evolution of Fot1, a member of the pogo family widely dispersed in ascomycetes, we have performed a phylogenetic survey across the genus Fusarium divided into six sections. The taxonomic distribution of Fot1 is not homogeneous but patchy; it is prevalent in the Fusarium oxysporum complex, absent in closely related sections, and found in five species from the most distant section Martiella. Multiple copies of Fot1 were sequenced from each strain in which the element occurs. In three species, the Fot1 nucleotide sequence is 98% identical to that from F. oxysporum (Fox), whereas nucleotide divergence for host genes is markedly higher: 11% for partial nuclear 28S rDNA and up to 30% for the gene encoding nitrate reductase (nia). In two species, sequence divergence of Fot1-related elements relative to Fox ranged from 7% to 23% (16% average). Most of the sequence differences (82%) were C-to-T and G-to-A transitions. These mutations are distributed throughout the Fot1 sequences, although they tend to be concentrated in the middle portion of the elements. Analysis of the local sequence context of transitions revealed a hierarchy of site preferences. These characteristics are typical of the repeat-induced point mutation process, first discovered in Neurospora crassa. The spotty distribution of Fot1 elements among species together with the high degree of similarity between Fot1 sequences present in distant species strongly suggests a case of horizontal transfer.