Copper-resistant bacteria from industrial effluents and their role in remediation of heavy metals in wastewater

Isolation and characterization of chromium-resistant bacteria and their effects on germination, growth, and Cr accumulation in Capsicum annum (L.) under Cr stress

Chromium (Cr) is a well-known environmental pollutant while less information is available on the role of Cr-resistant bacteria in the alleviation of Cr-stress in chili (Capsicum annum L.) plants. Effect of Cr-resistant bacterial strains on growth and Cr uptake by chili plants was investigated. The results revealed that Cr-stress showed a negative effect on germination, photosynthesis, and relative water content but the inoculation ameliorated the plant stress. Chromium-resistant bacterial strains enhanced the shoot and root growth (33% SL, 19.7% RL), shoot and root dry weight (35%, 32.9%), relative water content (32.25%), membrane stability index (46.52%) SPAD value (50.76%), Cr concentration in shoots and roots (19.87 and 18.52 mg kg-1), bioaccumulation and translocation factor (0.396 mgkg-1), and seedling vigor index (40.8%) of plants. Chromium-resistant bacterial strains enhanced the NPK uptake while reduced Cr uptake by plants. The morphological and biochemical examination of rhizobacterial strains (and NM28) resistant to Cr-stress revealed smooth, off-white colonies of bacteria composed of rod-shaped cells which are Gram positive in reaction while negative in catalase activity. High quantities of malic acid were produced by bacterial strains under study i.e. NM8 (926.12 μgmL-2) and NM28 (992.25 μgmL-2). These strains were identified as Bacillus cereus strain NM8 and Bacillus subtilis strain NM28 through 16S rRNA sequencing. Results showed that B. cereus strain NM28 is more effective than B. cereus strain NM8 in promoting the growth of Cr-stressed Chili that might be suitable to develop biofertilizer for sustainable production of vegetables under metal stress.

Isolation and screening of chromium resistant bacteria from industrial waste for bioremediation purposes

Chromium (VI) a highly toxic metal, a major constituent of industrial waste. It is continuously release in soil and water, causes environmental and health related issues, which is increasing public concern in developing countries like Pakistan. The basic aim of this study was isolation and screening of chromium resistant bacteria from industrial waste collected from Korangi and Lyari, Karachi (24˚52'46.0"N 66˚59'25.7"E and 24˚48'37.5"N 67˚06'52.6"E). Among total of 53 isolated strains, seven bacterial strains were selected through selective enrichment and identified on the basis of morphological and biochemical characteristics. These strains were designated as S11, S13, S17, S18, S30, S35 and S48, resistance was determined against varying concentrations of chromium (100-1500 mg/l). Two bacterial strains S35 and S48 showed maximum resistance to chromium (1600 mg/l). Bacterial strains S35 and S48 were identified through 16S rRNA sequence and showed 99% similarity to Bacillus paranthracis and Bacillus paramycoides. Furthermore, growth condition including temperature and pH were optimized for both bacterial strains, showed maximum growth at temperature 30ºC and at optimum pH 7.5 and 6.5 respectively. It is concluded that indigenous bacterial strains isolated from metal contaminated industrial effluent use their innate ability to transform toxic heavy metals to less or nontoxic form and can offer an effective tool for monitoring heavy metal contamination in the environment.

Biogenic copper nanoparticles synthesized by using a copper-resistant strain Shigella flexneri SNT22 reduced the translocation of cadmium from soil to wheat plants

The mechanistic role of green copper nanoparticles (CuNPs) in cadmium (Cd) toxicity alleviation in plants is poorly understood. Here, the CuNPs, synthesized by using a bacterium Shigella flexneri SNT22, were confirmed through UV-vis spectroscopy with a characteristic peak at 334.50 nm. Moreover, FT-IR, XRD, SEM, and TEM techniques revealed that the spherical shaped crystals of CuNPs with a size range of 17.24 nm to 38.03 nm were stabilized by coating proteins. Diff ;erent levels of CuNPs (e.g., 25, 50, and 100 mg kg^-1 of soil) were examined in pots having Cd-mixed soil to evaluate their effect on wheat plants in a growth chamber under optimal environmental conditions. Treatment of soil with 100 mg kg^-1 of CuNPs increased plant length by 44.4 %, shoot dry weight by 28.26 %, nitrogen contents by 41.60 %, and phosphorus contents by 58.79 %, whereas decreased the acropetal Cd translocation by 49.62 %. An increase in the N, P, K⁺, Ca²⁺, K⁺/Na⁺, and Ca²⁺/Na⁺ contents and decrease in the Na⁺ concentration in wheat plants treated with CuNPs was also recorded. Overall, the results are valuable to establish a green CuNPs-based approach for sustainable wheat growth in metal-contaminated soils.

Antimicrobial surfaces for use on inhabited space craft: A review

Biodegradation of materials on crewed spacecraft can cause disruption, loss of function and lost crew time. Cleaning of surfaces is only partially effective due in accessibility and resource concerns. Commonly affected surfaces are hand-touch sites, waste disposal systems and liquid-handling systems, including condensing heat exchangers. The use of materials on and within such affected systems that reduce the attachment of and degradation by microbes, is an innovative solution to this problem. This review aims to examine both terrestrial and space-based experiments that have aimed to reduce microbial growth which are applicable to the unique conditions of crewed spacecraft. Traditional antimicrobial surfaces such as copper and silver, as well as nanoparticles, long-chain organic molecules and surface topographical features, as well as novel "smart" technologies are discussed. Future missions to cis-lunar and Martian destinations will depend on materials that retain their function and reliability for their success; thus, the use of antimicrobial and antifouling materials is a pivotal one.

Biotransformation of chromium (VI) in liquid effluents by resistant bacteria isolated from the Matanza-Riachuelo basin, in Argentina

The aims of this investigation were to evaluate the bacterial resistance to zinc, copper, chromium (VI) and lead in surface water streams from Buenos Aires, Argentina; to select a chromium-resistant strain able to remove the metal in batch process and to evaluate the potential of this strain to remove chromium (VI) in liquid effluents. Bacterial resistance to the metals was evaluated by determining the minimal inhibitory concentration. The kinetic of chromium (VI) removal by one of the resistant strains was studied in nutrient broth with 50 and 100 mg L^-1 of the metal, as well as an effluent from an electroplating industry. High resistance to all the metals under study was observed in the bacterial communities of the Matanza-Riachuelo basin. A chromium-resistant strain was isolated and identified as Microbacterium sp. It was able to remove 50 and 100 mg L^-1 of Cr (VI) in 36 and 66 h respectively, with efficiency higher than 99%. Experiments with liquid effluents showed the ability of the strain to transform 150 mg L^-1 of the metal in 84 h, with efficiency higher than 99%. These results show the potential of this native strain for the treatment of liquid effluents that contain chromium (VI).

Impact of heavy metals on inhibitory concentration of Escherichia coli-a case study of river Yamuna system, Delhi, India

The occurrence of resistant bacteria to specific heavy metals can be associated with increasing load of the metals in the environment. River Yamuna is polluted by various toxic heavy metals discharged by several industrial and agricultural sources. Therefore, the use of heavy metal-resistant bacteria as an indicator of metal pollution was tested in the present study. For the purpose of the study, the heavy metal resistance status of 42 Escherichia coli strains isolated from River Yamuna water from 7 sampling sites within a span of 2 years was determined using growth curves and plate dilution method in terms of minimum inhibitory concentration (MIC) values by comparing with MIC value of control strain. Seasonally, the lowest mean MIC value was observed for bacterial strains isolated in post-monsoon (December) 2013 and highest mean MIC value was observed for bacterial strains isolated in monsoon (August) 2015. Site-wise analysis of the maximum mean MIC values for all the isolated strains showed the highest mean Ni MIC value for the bacterial strains isolated from site S4 (ITO), highest mean Cu MIC, Cr MIC, and Fe MIC values for the bacterial strains isolated from site S2 (Najafgarh drain intermixing zone) and highest mean Cd MIC, Pb MIC, and Zn MIC values for the bacterial strains isolated from site S7 (Shahdara drain intermixing zone). Correlation analysis between mean MIC site-wise results with mean heavy metal site-wise concentrations showed significant positive correlation indicating that the higher the mean concentration of a given heavy metal at a given site, the higher the mean MIC value for the strains isolated from the same site indicating higher level of resistance. Overall, the present study has shown that the presence of heavy metals in River Yamuna caused due to indiscriminate discharge of various effluents from different kind of sources as well as due to insufficient treatment capacity of sewage treatment plants as well as common effluent treatment plants, has serious impacts on its bacterial microflora as it leads to the development of resistant strains.

Potential of Bacterial Isolates from a Stream in Manaus-Amazon to Bioremediate Chromium-Contaminated Environments

Igarapé do Quarenta (IgQ), a stream located in the Manaus-AM, BR, has directly experienced the impacts of urban expansion over the last five decades, which contributed for its contamination. As an affluent of Rio Negro, IgQ also affects the water quality of this important river that bathes Manaus. However, the stress caused by the prolonged exposition to chemical agents may have selected microorganisms that exhibit great bioremediation potential. In the present study, bacteria isolated from four distinct sites of the IgQ were identified, and their potential to degrade hexavalent chromium (Cr(VI)) was investigated using the s-diphenylcarbazide method. Among the investigated isolates, 14 exhibited resistance against Cr(VI) at a concentration of 300 mg/L and eight isolates reduced over 50% (53.5-97.4%) chromium ratios after 72 h of incubation. Those isolates were identified by gene sequencing and classified in 10 genera (Acidovorax sp., Acinetobacter sp., Alicycliphilus sp., Bacillus sp., Comamonas sp., Enterobacter sp., Micrococcus sp., Proteus sp., Serratia sp., and Vagococcus sp.). Under control conditions, the isolate of Vagococcus sp. genus, in only 24 h of incubation, reduced 96.8% of the rate of Cr(VI) added to the culture medium at the concentration of 10 mg/L. Obtained results indicate that the Vagococcus sp. exhibits a great potential to be used in the bioremediation of areas contaminated with chromium. The mechanisms of action of microorganisms should be investigated for more specific applications in the decontamination of effluents and direct use of its by-products to bioremediate polluted environments.

Copper-tolerant rhizosphere bacteria-characterization and assessment of plant growth promoting factors

Remediation of heavy metal contaminated soil is a major problem or concern worldwide. Heavy metal accumulation in the soil is increasing day by day by industries, mines, agriculture, fuel combustion and municipal waste discharge. Such contaminated soils harbour a large number of resistant microbial populations. Screening and isolation of such microbes would be utilized for natural remediation of metal contaminated soils. Therefore, in the present study, highly copper-tolerant bacteria from rhizosphere soil of Cynodon dactylon grown in brass effluent contaminated soil were isolated and assessed for plant growth promoting factors. A total of 61 isolates were isolated from the rhizosphere of three contaminated sites. Six highly copper-tolerant isolates named as MYS1, MYS2, MYS3, MYS4, MYS5 and MYS6 were isolated through enrichment in copper containing nutrient broth. 16S rRNA analysis revealed that the isolates were from genera Stenotrophomonas and Brevundimonas and belong to classes Alpha Proteobacteriacea and Gamma Proteobacteriacea, respectively. Strain MYS1, MYS2 and MYS4 showed 95-99% similarity with Stenotrophomonas acidaminiphila, strain MYS3 and MYS5 showed 99 and 97% similarity with Stenotrophomonas maltophilia and Stenotrophomonas sp. Strain MYS6 showed 94% similarity with Brevundimonas diminuta. All the rhizobacteria showed plant growth promoting traits such as production of siderophores, indole acetic acid (IAA), phosphate solubilization and 1-aminocyclopropane-1-carboxylic acid (ACC) deaminase activity. From this study, we can conclude that all the isolates possess copper resistance and potential for phytoremediation of copper polluted soils.

Removal and recovery of toxic silver ion using deep-sea bacterial generated biogenic manganese oxides

Products containing silver ion (Ag⁺) are widely used, leading to a large amount of Ag⁺-containing waste. The deep-sea manganese-oxidizing bacterium Marinobacter sp. MnI7-9 efficiently oxidizes Mn²⁺ to generate biogenic Mn oxide (BMO). The potential of BMO for recovering metal ions by adsorption has been investigated for some ions but not for Ag⁺. The main aim of this study was to develop effective methods for adsorbing and recovering Ag using BMO produced by Marinobacter sp. MnI7-9. In addition, the adsorption mechanism was determined using X-ray photoelectron spectroscopy analysis, specific surface area analysis, adsorption kinetics and thermodynamics. The results showed that BMO had a higher adsorption capacity for Ag⁺ compared to the chemical synthesized MnO₂ (CMO). The isothermal absorption curves of BMO and CMO both fit the Langmuir model well and the maximum adsorption capacities at 28°C were 8.097 mmol/g and 0.787 mmol/g, for BMO and CMO, respectively. The change in enthalpy (ΔH^θ) for BMO was 59.69 kJ/mol indicating that it acts primarily by chemical adsorption. The change in free energy (ΔG^θ) for BMO was negative, which suggests that the adsorption occurs spontaneously. Ag⁺ adsorption by BMO was driven by entropy based on the positive ΔS^θ values. The Ag⁺ adsorption kinetics by BMO fit the pseudo-second order model and the apparent activation energy of E_a is 21.72 kJ/mol. X-ray photoelectron spectroscopy analysis showed that 15.29% Ag⁺ adsorbed by BMO was transferred to Ag(0) and meant that redox reaction had happened during the adsorption. Desorption using nitric acid and Na₂S completely recovered the Ag. The results show that BMO produced by strain MnI7-9 has potential for bioremediation and reutilization of Ag⁺-containing waste.

Heavy metal tolerance in the psychrotolerant Cryptococcus sp. isolated from deep-sea sediments of the Central Indian Basin

A deep-sea isolate of the psychrotolerant yeast Cryptococcus sp. (NIOCC#PY13) obtained from polymetallic nodule-bearing sediments of the Central Indian Basin was examined for its capacity to grow in the presence of various concentrations of the heavy metal salts i.e., ZnSO4 , CuSO4 , Pb(CH3 COO)2 and CdCl2 . It demonstrated considerable growth in the presence of 100 mg/l concentrations of the above-mentioned four heavy metal salts both at 30°C and 15°C. This strain tolerated comparatively higher levels of these four metal salts than other deep-sea and terrestrial yeast isolates belonging to Cryptococcus, Rhodotorula, Rhodosporidium and Sporidiobolus spp. Optimum pH for growth of this isolate was in the range of 6-8 in the presence of heavy metal salts at these two temperatures. Scanning electron microscopic (SEM) studies exhibited altered cell surface morphology of the cells under the influence of heavy metals compared to that with control. The adsorption of heavy metals to the cells was demonstrated by FTIR and EDAX analysis. As evidenced by atomic absorption spectrophotometric (AAS) analysis, about 30-90% of the heavy metals were removed from the culture supernatant after 4 days of growth at 30°C. This deep-sea yeast isolate appears to be a potential candidate for bioremediation of metal-contaminated sites. Moreover, its metal tolerance properties provide a significant insight into its ecological role and adaptations to growth in such extreme conditions.

Incidence of metal and antibiotic resistance in Pseudomonas spp. from the river water, agricultural soil irrigated with wastewater and groundwater

A total of 144 isolates of Pseudomonas spp. (48 each from the Yamuna River water, wastewater irrigated soil and groundwater irrigated soil) were tested for their resistance against certain heavy metals and antibiotics. Minimum inhibitory concentrations (MICs) of Hg(2+ ), Cd(2+ ), Cu(2+ ), Zn(2+ ), Ni(2+ ), Pb(2+ ), Cr(3+ ) and Cr(6+ ) for each isolate were also determined. A maximum MIC of 200 μg/ml for mercury and 3,200 μg/ml for other metals were observed. The incidences of metal resistance and MICs of metals for Pseudomonas isolates from the Yamuna water and wastewater irrigated soil were significantly different to those of groundwater irrigated soil. A high level of resistance against tetracycline and polymyxin B (81.2%) was observed in river water isolates. However, 87.5% of Pseudomonas isolates from soil irrigated with wastewater showed resistance to sulphadiazine, whereas 79.1% were resistant to both ampicillin and erythromycin. Isolates from soil irrigated with groundwater exhibited less resistance towards heavy metals and antibiotics as compared to those of river water and wastewater irrigated soil. Majority of the Pseudomonas isolates from water and soil exhibited resistance to multiple metals and antibiotics. Resistance was transferable to recipient Escherichia coli AB2200 strains by conjugation. Plasmids were cured with the curing agent ethidium bromide and acridine orange at sub-MIC concentration.

Prevalence of heavy metal resistance in bacteria isolated from tannery effluents and affected soil

In the present study, a total of 198 bacteria were isolated, 88 from the tannery effluents and 110 from agricultural soil irrigated with the tannery effluents. Tannery effluents and soils were analyzed for metal concentrations by atomic absorption spectrophotometer. The tannery effluents and soil samples were found to be contaminated with chromium, nickel, zinc, copper, and cadmium. All isolates were tested for their resistance against Cr(6+ ), Cr(3+ ), Ni(2+ ), Zn(2+ ), Cu(2+ ), Cd(2+ ), and Hg(2+ ). From the total of 198 isolates, maximum bacterial isolates were found to be resistant to Cr(6+ ) 178 (89.9%) followed by Cr(3+ ) 146 (73.7%), Cd(2+ ) 86 (43.4%), Zn(2+ ) 83 (41.9%), Ni(2+ ) 61 (30.8%), and Cu(2+ ) 51 (25.6%). However, most of the isolates were sensitive to Hg(2+ ). Among the isolates from tannery effluents, 97.8% were resistant to Cr(6+ ) and 64.8% were resistant to Cr(3+ ). Most of the soil isolates were resistant against Cr(6+ ) (83.6%) and Cr(3+ ) (81.8%). All isolates were categorized into Gram-positive and Gram-negative bacteria. In a total of 114 Gram-positive isolates, 91.2% were resistant to Cr(6+ ) followed by 73.7% to Cr(3+ ), 42.1% to Zn(2+ ), 40.4% to Cd(2+ ), and 32.5% to Ni(2+ ). Among Gram-negative isolates, 88.1% were found showing resistance to Cr(6+ ), 75.0% to Cr(3+ ), and 47.6% were resistant to Cd(2+ ). Majority of these metal-resistant isolates were surprisingly found sensitive to the ten commonly used antibiotics. Out of 198 isolates, 114 were found sensitive to all antibiotics whereas only two isolates were resistant to maximum eight antibiotics at a time. Forty-one and 40 isolates which constitute 20.7% and 20.2% were resistant to methicilin and amoxicillin, respectively.

Biosorption of copper by yeast, Loddermyces elongisporus, isolated from industrial effluents: its potential use in wastewater treatment

The present study is aimed at assessing the ability of metal resistant yeast, Loddermyces elongisporus, to uptake metal from liquid medium. The minimum inhibitory concentration of Cu(2+) against Loddermyces elongisporus ranged between 2.2-2.3 mg/l. The yeast could also tolerate Zn(2+) (2.9 mg/l), Hg(2+) (2.4 mg/l), Ni(2+) (2.2 mg/l), Cr(6+) (2.0 mg/l), Pb(2+) (1.1 mg/l), and Cd(2+) (0.8 mg/l). The yeast isolate showed typical growth curves but lag and log phases extended in the presence of copper. Yeast isolate showed optimum growth at 30 degrees C and pH 8. Metal processing ability of the isolate was determined in a medium containing 0.1 mg/l of Cu(2+). Loddermyces elongisporus could reduce Cu(2+) 15%, 26%, 39%, 50%, 60%, 67%, 75% and 81% from the medium after 6, 12, 18, 24, 30, 48, 72 and 96 hours, respectively. L. elongisporus could also efficiently remove 80% copper from the medium after 96 h and was able to remove Cu(2+) 60% and 77% from the wastewater after 4 and 8 d, respectively. The metal binding ability suggests possibility of using this yeast strain for removal of copper from metal contaminated wastewater.

Copper accumulation by bacteria and transfer to scallop larvae

A bacterial copper-resistant strain was isolated from a hatchery-conditioned adult of the scallop Argopecten purpuratus and was identified as Vibrio sp. according to its physiological characteristics. The lowest concentration of Cu2+ required for its complete inhibition in VNSS medium was 50 microg ml(-1). The Vibrio strain was found to accumulate copper, exhibiting cellular and loosely bound copper levels of 201.14 and 493.21 microg g(-1) dry weight, respectively, after 24 h of incubation in VNSS medium supplemented with 15 microg ml(-1) of Cu2+, with cellular concentration factors of 10.17 and 14.35 after 12 and 24 h of exposure. When a scallop larvae culture was exposed to a concentration of 6.46 x 10(2) CFU ml(-1) of Cu-enriched Vibrio, they accumulated 20.42 +/- 1.12 and 30.96 +/- 1.85 microg Cu2+ g(-1) dry weight after 12 and 24 h, respectively. This study suggests that bacterial copper accumulation could be very active in marine environments increasing the occurrence of copper transfer to marine food chains.

Removal of copper ions from dilute solutions by Streptomyces noursei mycelium. Comparison with yeast biomass

Sorption properties of Streptomyces noursei mycelium for copper ions were compared with the accumulation competence of dried and native yeast (Candida utilis) biomass. The copper sorption capacity of S. noursei after optimization was found to be higher than that of the two other adsorbents (dried yeast biomass 82 %, native Candida cells 48 % of the sorption capacity of the S. noursei mycelium).

Isolation and identification of bacteria from spent nuclear fuel pools

The aim of the present research was to isolate and identify bacteria from spent nuclear fuel pools of a Spanish nuclear power plant. Water samples were collected and inoculated onto different culture media to isolate the highest number of species. 16S rDNA fragments from colonies growing on solid media were amplified and analysed by denaturing gradient gel electrophoresis. Sequencing revealed the presence of 21 different bacteria belonging to several phylogenetic groups (alpha, beta, and gamma-Proteobacteria, Actinomycetales, Flavobacterium, and the Bacillus/Staphylococcus group). The isolation of these microorganisms in this particular environment (oligotrophic and radioactive) is highly interesting because of the possibility of their being used for the bioremediation of radionuclide-contaminated waters.