Development of rapeseed with high erucic acid content by asymmetric somatic hybridization between Brassica napus and Crambe abyssinica

Production and characterization of a novel interspecific somatic hybrid combining drought tolerance and high quality of sweet potato and Ipomoea triloba L

A novel interspecific somatic hybrid combining drought tolerance and high quality of sweet potato and Ipomoea triloba L. was obtained and its genetic and epigenetic variations were studied. Somatic hybridization can be used to overcome the cross-incompatibility between sweet potato (Ipomoea batatas (L.) Lam.) and its wild relatives and transfer useful and desirable genes from wild relatives to cultivated plants. However, most of the interspecific somatic hybrids obtained to date cannot produce storage roots and do not exhibit agronomic characters. In the present study, a novel interspecific somatic hybrid, named XT1, was obtained through protoplast fusion between sweet potato cv. Xushu 18 and its wild relative I. triloba. This somatic hybrid produced storage roots and exhibited significantly higher drought tolerance and quality compared with its cultivated parent Xushu 18. Transcriptome and real-time quantitative PCR (qRT-PCR) analyses revealed that the well-known drought stress-responsive genes in XT1 and I. triloba were significantly up-regulated under drought stress. The genomic structural reconstructions between the two genomes of the fusion parents in XT1 were confirmed using genomic in situ hybridization (GISH) and specific nuclear and cytoplasmic DNA markers. The DNA methylation variations were characterized by methylation-sensitive amplified polymorphism (MSAP). This study not only reveals the significance of somatic hybridization in the genetic improvement of sweet potato but also provides valuable materials and knowledge for further investigating the mechanism of storage root formation in sweet potato.

Biotechnological approach for improvement of Crambe species as valuable oilseed plants for industrial purposes

Boosting technological innovation for a sustainable and circular bioeconomy encompasses the use of renewable materials and development of highly effective biotechnological approaches to improve the quality of oilseed crops and facilitate their industrial deployment. The interest in cultivating Crambe as a potential crop is steadily growing due to its low propensity to crossbreeding with other oilseed crops, valuable seed oil composition and a high yield capacity. The main focus is located on Crambe abyssinica as the most adapted into the agriculture and well-studied Crambe species. At the same time, the Crambe genus is one of the most numerous of the Brassicaceae family featuring several underestimated (orphaned) species with useful traits (abiotic stress tolerance, wide range of practical applications). This review features progress in the biotechnological improvement of well-adapted and wild Crambe species starting with aseptic culture establishment and plant propagation in vitro reinforced with the use of genetic engineering and breeding techniques. The aim of the paper is to highlight and review the existing biotechnological methods of both underestimated and well-adapted Crambe species improvment, including the establishment of aseptic culture, in vitro cultivation, plant regeneration and genetic transformation to modify seed oil content and morphological traits of valuable species.

Genetic and Epigenetic Alterations of Brassica nigra Introgression Lines from Somatic Hybridization: A Resource for Cauliflower Improvement

Broad phenotypic variations were obtained previously in derivatives from the asymmetric somatic hybridization of cauliflower "Korso" (Brassica oleracea var. botrytis, 2n = 18, CC genome) and black mustard "G1/1" (Brassica nigra, 2n = 16, BB genome). However, the mechanisms underlying these variations were unknown. In this study, 28 putative introgression lines (ILs) were pre-selected according to a series of morphological (leaf shape and color, plant height and branching, curd features, and flower traits) and physiological (black rot/club root resistance) characters. Multi-color fluorescence in situ hybridization revealed that these plants contained 18 chromosomes derived from "Korso." Molecular marker (65 simple sequence repeats and 77 amplified fragment length polymorphisms) analysis identified the presence of "G1/1" DNA segments (average 7.5%). Additionally, DNA profiling revealed many genetic and epigenetic differences among the ILs, including sequence alterations, deletions, and variation in patterns of cytosine methylation. The frequency of fragments lost (5.1%) was higher than presence of novel bands (1.4%), and the presence of fragments specific to Brassica carinata (BBCC 2n = 34) were common (average 15.5%). Methylation-sensitive amplified polymorphism analysis indicated that methylation changes were common and that hypermethylation (12.4%) was more frequent than hypomethylation (4.8%). Our results suggested that asymmetric somatic hybridization and alien DNA introgression induced genetic and epigenetic alterations. Thus, these ILs represent an important, novel germplasm resource for cauliflower improvement that can be mined for diverse traits of interest to breeders and researchers.

Development of a complete set of monosomic alien addition lines between Brassica napus and Isatis indigotica (Chinese woad)

A complete set of monosomic alien addition lines of Brassica napus with one of the seven chromosomes of Isatis indigotica and the recombinant mitochondria was developed and characterized. Monosomic alien addition lines (MAALs) are valuable for elucidating the genome structure and transferring the useful genes and traits in plant breeding. Isatis indigotica (Chinese woad, 2n = 14, II) in Isatideae tribe of Brassicaceae family has been widely cultivated as a medicinal and dye plant in China. Herein, the intertribal somatic hybrid (2n = 52, AACCII) between B. napus cv. Huashuang 3 (2n = 38, AACC) and I. indigotica produced previously was backcrossed recurrently to parental B. napus, and 32 MAAL plants were isolated. Based on their phenotype, 5S and 45S rDNA loci and chromosome-specific SSR markers, these MAALs were classified into seven groups corresponding to potential seven types of MAALs carrying one of the seven I. indigotica chromosomes. One of the MAALs could be distinguishable by expressing the brown anthers of I. indigotica, other two hosted the chromosome with 5S or 45S rDNA locus, but the remaining four were identifiable by SSR markers. The simultaneous detection of the same SSR maker and gene locus in different MAALs revealed the paralogs on the chromosomes involved. The recombinant mitochondrial genome in MAALs was likely related with their male sterility with carpellody stamens, while the MAAL with normal brown anthers probably carried the restoring gene for the male sterility. The complete set of MAALs should be useful for exploiting the I. indigotica genome and for promoting the introgression of valuable genes to B. napus.

The place of asymmetric somatic hybridization in wheat breeding

Since its first development some 40 years ago, the application of the somatic hybridization technique has generated a body of hybrid plant material involving a wide combination of parental species. Until the late 1990s, the technique was ineffective in wheat, as regeneration from protoplasts was proving difficult to achieve. Since this time, however, a successful somatic hybridization protocol for wheat has been established and used to generate a substantial number of both symmetric and asymmetric somatic hybrids and derived materials, especially involving the parental combination bread wheat and tall wheatgrass (Thinopyrum ponticum). This review describes the current state of the art for somatic hybridization in wheat and focuses on its potential application for wheat improvement.

The timetable for allopolyploidy in flowering plants

BACKGROUND

Our understanding of the processes and dynamics of allopolyploid speciation, the long-term consequences of ploidal change, and the genetic and chromosomal changes in new emerged allopolyploids has substantially increased during the past few decades. Yet we remain uncertain about the time since lineage divergence when two taxa are capable of spawning such entities. Indeed, the matter has seemed intractable. Knowledge of the window of opportunity for allopolyploid production is very important because it provides temporal insight into a key evolutionary process, and a temporal reference against which other modes of speciation may be measured.

SCOPE

This Viewpoint paper reviews and integrates published information on the crossability of herbaceous species and the fertility of their hybrids in relation to species' divergence times. Despite limitations in methodology and sampling, the estimated times to hybrid sterility are somewhat congruent across disparate lineages. Whereas the waiting time for hybrid sterility is roughly 4-5 million years, the waiting time for cross-incompatibility is roughly 8-10 million years, sometimes considerably more. Strict allopolyploids may be formed in the intervening time window. The progenitors of several allopolyploids diverged between 4 and 6 million years before allopolyploid synthesis, as expected. This is the first study to propose a general temporal framework for strict allopolyploidy. This Viewpoint paper hopefully will stimulate interest in studying the tempo of speciation and the tempo of reproductive isolation in general.

Quantitative analysis of enzymatic fractionation of multiple substrate mixtures

The enzymatic conversion of mixtures of multiple substrates was studied quantitatively, based on established methodology used for the enzymatic kinetic resolution of racemic mixtures, involving the use of competitive factors: ratios of specificity constants (k(cat)/K(M)) of substrate pairs. The competitive factors of the substrates were defined in relation to a reference substrate. These competitive factors were used to predict the composition of the reaction mixture as a function of the degree of conversion of the reaction. The methodology was evaluated using three different lipases to hydrolyze a model mixture of four fatty acid methyl esters and for the esterification of a mixture of the same fatty acids in free form with ethanol. In most cases, the competitive factors determined from the initial phase of the reactions predicted the product composition during the rest of the reaction very well. The slowest reacting fatty acid was erucic acid (both in free form and as methyl ester), which was thus enriched in the remaining substrate fraction, while the other fatty acids: lauric acid, palmitic acid and oleic acid were converted faster. Simulations of the compositions of reaction mixtures with different values of the competitive factors were carried out to provide an overview of what could be achieved using enzymatic enrichment. Possible applications include reactions involving homologous substrates and mixtures of multiple isomers. The analysis presented provides guidelines that can be useful in the screening and development of enzymes for enzymatic enrichment applications.

An alginate-layer technique for culture of Brassica oleracea L. protoplasts

Ten accessions belonging to the Brassica oleracea subspecies alba and rubra, and to B. oleracea var. sabauda were used in this study. Protoplasts were isolated from leaves and hypocotyls of in vitro grown plants. The influence of selected factors on the yield, viability, and mitotic activity of protoplasts immobilized in calcium alginate layers was investigated. The efficiency of protoplast isolation from hypocotyls was lower (0.7 ± 0.1 × 10(6) ml(-1)) than for protoplasts isolated from leaf mesophyll tissue (2 ± 0.1 × 10(6) ml(-1)). High (70-90%) viabilities of immobilized protoplasts were recorded, independent of the explant sources. The highest proportion of protoplasts undergoing divisions was noted for cv. Reball F1, both from mesophyll (29.8 ± 2.2%) and hypocotyl (17.5 ± 0.3%) tissues. Developed colonies of callus tissue were subjected to regeneration and as a result plants from six accessions were obtained.

Production and characterization of interspecific somatic hybrids between Brassica oleracea var. botrytis and B. nigra and their progenies for the selection of advanced pre-breeding materials

Somatic hybridization is a potential method for gene transfer from wild relatives to cultivated crops that can overcome sexual incompatibilities of two distantly related species. In this study, interspecific asymmetric somatic hybrids of Brassica oleracea var. botrytis (cauliflower) and Brassica nigra (black mustard) were obtained by protoplast fusion and their backcrossed (BC(3)) and selfed (S(3)) offspring were analyzed. Cytological analysis showed that the B. nigra chromosomes were successively eliminated in the backcrosses with cauliflower. The fertility of the hybrid progenies was quite different due to the asynchronous and abnormal chromosome behavior of pollen mother cells (PMC) during meiosis. Analysis of sequence-related amplified polymorphism (SRAP) showed that all of these hybrids mainly had the DNA banding pattern from the two parents with some alterations. Genetically, the selfed generations were closer to B. nigra, while the backcrossed generations were closer to the cauliflower parent. Analysis of cleaved amplified polymorphic sequences (CAPS) and restriction fragment length polymorphisms (RFLP) showed that all somatic hybrids in this study contained chloroplast (cp) DNA of the donor parent black mustard, while mitochondrial (mt) DNA showed evidence of recombination and variations in the regions analyzed. Furthermore, three BC(3) plants (originated from somatic hybrids 3, 4, 10) with 2-8 B. nigra-derived chromosomes shown by genomic in situ hybridization (GISH) displayed a more cauliflower-like morphology and high resistance to black-rot. These plants were obtained as bridge materials for further analysis and breeding.

Replacing fossil oil with fresh oil - with what and for what?

Industrial chemicals and materials are currently derived mainly from fossil-based raw materials, which are declining in availability, increasing in price and are a major source of undesirable greenhouse gas emissions. Plant oils have the potential to provide functionally equivalent, renewable and environmentally friendly replacements for these finite fossil-based raw materials, provided that their composition can be matched to end-use requirements, and that they can be produced on sufficient scale to meet current and growing industrial demands. Replacement of 40% of the fossil oil used in the chemical industry with renewable plant oils, whilst ensuring that growing demand for food oils is also met, will require a trebling of global plant oil production from current levels of around 139 MT to over 400 MT annually. Realisation of this potential will rely on application of plant biotechnology to (i) tailor plant oils to have high purity (preferably >90%) of single desirable fatty acids, (ii) introduce unusual fatty acids that have specialty end-use functionalities and (iii) increase plant oil production capacity by increased oil content in current oil crops, and conversion of other high biomass crops into oil accumulating crops. This review outlines recent progress and future challenges in each of these areas.

Practical applications: The research reviewed in this paper aims to develop metabolic engineering technologies to radically increase the yield and alter the fatty acid composition of plant oils and enable the development of new and more productive oil crops that can serve as renewable sources of industrial feedstocks currently provided by non-renewable and polluting fossil-based resources. As a result of recent and anticipated research developments we can expect to see significant enhancements in quality and productivity of oil crops over the coming decades. This should generate the technologies needed to support increasing plant oil production into the future, hopefully of sufficient magnitude to provide a major supply of renewable plant oils for the industrial economy without encroaching on the higher priority demand for food oils. Achievement of this goal will make a significant contribution to moving to a sustainable carbon-neutral industrial society with lower emissions of carbon dioxide to the atmosphere and reduced environmental impact as a result.

Production and genetic analysis of partial hybrids from intertribal sexual crosses between Brassica napus and Isatis indigotica and progenies

With the dye and medicinal plant Isatis indigotica (2n = 14) as pollen parent, intertribal sexual hybrids with Brassica napus (2n = 38, AACC) were obtained and characterized. Among a lot of F1 plants produced, only five hybrids (H1–H5) were distinguished morphologically from female B. napus parents by showing low fertility and some characters of I. indigotica, and also by having different chromosome numbers. H1–H4 had similar but variable chromosome numbers in their somatic and meiotic cells (2n = 25–30), and H5 had 2n = 19, the same number as the haploid of B. napus. GISH analysis of the cells from H1 and H5 detected one I. indigotica chromosome and one or two chromosome terminal fragments. New B. napus types with phenotypic and genomic alterations were produced by H1 after pollination by B. napus and selfing for several generations, and by H5 after selfing. A progeny plant (2n = 20) was derived from H1 after pollination by I. indigotica twice and had a phenotype similar to a certain type of B. rapa, showing that hybrid H1 likely retained all chromosomes of the A genome and lost some of the C genome in parental B. napus. The reasons for the formation of the partial hybrids with unexpected chromosomal complements and for the chromosome elimination are discussed.

Progress of chromosome engineering mediated by asymmetric somatic hybridization

Plant somatic hybridization has progressed steadily over the past 35 years. Many hybrid plants have been generated from fusion combinations of different phylogenetic species, some of which have been utilized in crop breeding programs. Among them, asymmetric hybrid, which usually contains a fraction of alien genome, has received more attention because of its importance in crop improvement. However, few studies have dealt with the heredity of the genome of somatic hybrid for a long time, which has limited the progress of this approach. Over recent ten years, along with the development of an effective cytogenetical tool "in situ hybridization (ISH)", asymmetric fusion of common wheat (Triticum aestivum L.) with different grasses or cereals has been greatly developed. Genetics, genomes, functional genes and agricultural traits of wheat asymmetric hybrids have been subject to systematic investigations using gene cloning, genomic in situ hybridization (GISH) and molecular makers. The future goal is to fully elucidate the functional relationships among improved agronomic traits, the genes and underlying molecular mechanisms, and the genome dynamics of somatic introgression lines. This will accelerate the development of elite germplasms via somatic hybridization and the application of these materials in the molecular improvement of crop plants.

Production and cytogenetic characterization of intertribal somatic hybrids between Brassica napus and Isatis indigotica and backcross progenies

Intertribal somatic hybrids between Brassica napus (2n = 38, AACC) and a dye and medicinal plant Isatis indigotica (2n = 14, II) were obtained by fusions of mesophyll protoplasts. From a total of 237 calli, only one symmetric hybrid (S2) and five asymmetric hybrids (As1, As4, As6, As7 and As12) were established in the field. These hybrids showed some morphological variations and had very low pollen fertility. Hybrids S2 and As1 possessed 2n = 52 (AACCII), the sum of the parental chromosomes, and As12 had 2n = 66 (possibly AACCIIII). Hybrids As4, As6 and As7 were mixoploids (2n = 48-62). Genomic in situ hybridization analysis revealed that pollen mother cells at diakinesis of As1 contained 26 bivalents comprising 19 from B. napus and 7 from I. indigotica and mainly showed the segregation 26:26 at anaphase I (AI) with 7 I. indigotica chromosomes in each polar group. Four BC(1) plants from As1 after pollinated by B. napus resembled mainly B. napus in morphology but also exhibited some characteristics from I. indigotica. These plants produced some seeds on selfing or pollination by B. napus. They had 2n = 45 (AACCI) and underwent pairing among the I. indigotica chromosomes and/or between the chromosomes of two parents at diakinesis. All hybrids mainly had the AFLP banding patterns from the addition of two parents plus some alterations. B. napus contributed chloroplast genomes in majority of the hybrids but some also had from I. indigotica. Production of B. napus-I. indigotica additions would be of considerable importance for genome analysis and breeding.

Production and characterization of intergeneric somatic hybrids between Brassica napus and Orychophragmus violaceus and their backcrossing progenies

Alien chromosome addition lines have been widely used for identifying gene linkage groups, assigning species-specific characters to a particular chromosome and comparing gene synteny between related species. In plant breeding, their utilization lies in introgressing characters of agronomic value. The present investigation reports the production of intergeneric somatic hybrids Brassica napus (2n = 38) + Orychophragmus violaceus (2n = 24) through asymmetric fusions of mesophyll protoplasts and subsequent development of B. napus-O. violaceous chromosome addition lines. Somatic hybrids showed variations in morphology and fertility and were mixoploids (2n = 51-67) with a range of 19-28 O. violaceus chromosomes identified by genomic in situ hybridization (GISH). After pollinated with B. napus parent and following embryo rescue, 20 BC(1) plants were obtained from one hybrid. These exhibited typical serrated leaves of O. violaceus or B. napus-type leaves. All BC(1) plants were partially male fertile but female sterile because of abnormal ovules. These were mixoploids (2n = 41-54) with 9-16 chromosomes from O. violaceus. BC(2) plants showed segregations for female fertility, leaf shape and still some chromosome variation (2n = 39-43) with 2-5 O. violaceus chromosomes, but mainly containing the whole complement from B. napus. Among the selfed progenies of BC(2) plants, monosomic addition lines (2n = 39, AACC + 1O) with or without the serrated leaves of O. violaceus or female sterility were established. The complete set of additions is expected from this investigation. In addition, O. violaceus plants at diploid and tetraploid levels with some variations in morphology and chromosome numbers were regenerated from the pretreated protoplasts by iodoacetate and UV-irradiation.

High-value oils from plants

The seed oils of domesticated oilseed crops are major agricultural commodities that are used primarily for nutritional applications, but in recent years there has been increasing use of these oils for production of biofuels and chemical feedstocks. This is being driven in part by the rapidly rising costs of petroleum, increased concern about the environmental impact of using fossil oil, and the need to develop renewable domestic sources of fuel and industrial raw materials. There is also a need to develop sustainable sources of nutritionally important fatty acids such as those that are typically derived from fish oil. Plant oils can provide renewable sources of high-value fatty acids for both the chemical and health-related industries. The value and application of an oil are determined largely by its fatty acid composition, and while most vegetable oils contain just five basic fatty acid structures, there is a rich diversity of fatty acids present in nature, many of which have potential usage in industry. In this review, we describe several areas where plant oils can have a significant impact on the emerging bioeconomy and the types of fatty acids that are required in these various applications. We also outline the current understanding of the underlying biochemical and molecular mechanisms of seed oil production, and the challenges and potential in translating this knowledge into the rational design and engineering of crop plants to produce high-value oils in plant seeds.

Production and characterization of intertribal somatic hybrids of Raphanus sativus and Brassica rapa with dye and medicinal plant Isatis indigotica

Intertribal somatic hybrids of Raphanus sativus (2n = 18, RR) and Brassica rapa spp. chinensis (2n = 20, AA) with the dye and medicinal plant Isatis indigotica (2n = 14, I I) were firstly obtained by polyethylene glycol-induced symmetric fusions of mesophyll protoplasts. One mature hybrid with R. sativus established in field had intermediate morphology but was totally sterile. It had the expected chromosome number (2n = 32, RRI I) and parental chromosomes were distinguished by genomic in situ hybridization (GISH) analysis, and these chromosomes were paired as 16 bivalents in pollen mother cells (PMCs) at diakinesis and mainly segregated equally as 16:16 at anaphase I (A I), but the meiotic disturbance in second division was obvious. Five mature hybrids with B. rapa established in field were morphologically intermediate but showed some differences in phenotypic traits and fertility, two were partially fertile. Cytological and GISH investigations revealed that these hybrids had 2n = 48 with AAIIII complement and their PMCs showed normal pairing of 24 bivalents and mainly equal segregation 24:24, but meiotic abnormalities of lagging chromosomes and micronuclei appeared frequently during second divisions. AFLP analysis showed that all of these hybrids had mainly the DNA banding pattern from the addition of two parents plus some alterations. Some hybrids should be used for the genetic improvement of crops and the dye and medicinal plant.

Chromosome elimination and fragment introgression and recombination producing intertribal partial hybrids from Brassica napus x Lesquerella fendleri crosses

The intertribal sexual hybrids between three Brassica napus (2n=38) cultivars and Lesquerella fendleri (2n=12) with the latter as pollen parent were obtained and characterized for their phenotypes and chromosomal and genomic constitutions. F(1) plants and their progenies mainly resembled female B. napus parents, while certain characters of L. fendleri were expressed in some plants, such as longer flowering period, basal clustering stems and particularly the glutinous layer on seed coats related to drought tolerance. Twenty-seven F(1) plants were cytologically classified into five types: type I (16 plants) had 2n=38, type II (2) had 2n=38-42, type III (3) had 2n=31-38, type IV (5) had 2n=25-31, and type V (1) had 2n=19-22. Some hybrids and their progenies were mixoploids in nature with only 1-2 chromosomes or some chromosomal fragments of L. fendleri included in their cells. AFLP (Amplified fragments length polymorphism) analysis revealed that bands absent in B. napus, novel for two parents and specific for L. fendleri appeared in all F(1) plants and their progenies. Some progenies had the modified fatty acid profiles with higher levels of linoleic, linolenic, eicosanoic and erucic acids than those of B. napus parents. The occurrence of these partial hybrids with phenotypes, genomic and fatty acid alterations resulted possibly from the chromosome elimination and doubling accompanied by the introgression of alien DNA segments and genomic reorganization. The progenies with some useful traits from L. fendleri should be new and valuable resource for rapeseed breeding.

Asymmetric somatic hybridization between UV-irradiated Citrus unshiu and C. sinensis: regeneration and characterization of hybrid shoots

In the present paper, attempts were made to explore the possibility of employing ultraviolet (UV) irradiation in citrus asymmetric fusion for transfer of limited amount of favorable traits from a desirable cultivar to a target one. Exposure of Satsuma mandarin (Citrus unshiu Marc.) embryogenic protoplasts to UV at an intensity of 300 muW cm(-2) led to reduced viability, especially under long irradiation duration. The protoplasts could not grow during culture when they were irradiated for over 30 s. Terminal deoxynucleotidyl transferase biotin-dUTP nick end labeling (TUNEL) assay revealed extensive DNA fragmentation in the UV-irradiated protoplasts compared with those without UV treatment. Electrofusion between UV-irradiated protoplasts of Satsuma mandarin (donor) with those of Jincheng (C. sinensis Osbeck, recipient), a local cultivar of superior quality, gave rise to regeneration of several lines of shoots, which failed to root despite enormous endeavors. Ploidy analysis via flow cytometry and chromosome counting showed that four selected shoots were either diploid, triploid or tetraploid. Random amplified polymorphism DNA (RAPD) and amplified fragment length polymorphism (AFLP) confirmed the shoots, irrespective of their ploidy level, as putative somatic hybrids. Cleaved amplified polymorphism sequences (CAPS) demonstrated that the shoots predominantly got their cytoplasmic components, in terms of chloroplast (cp) and mitochondrion DNA, from Jincheng, along with possible recombination of cpDNA in some shoot lines. The current data indicated that UV-based asymmetric fusion could also be employed in citrus somatic hybridization with the intention of creating novel germplasms, which may provide an alternative approach for cultivar improvement.

GISH analysis of disomic Brassica napus-Crambe abyssinica chromosome addition lines produced by microspore culture from monosomic addition lines

Two Brassica napus-Crambe abyssinica monosomic addition lines (2n=39, AACC plus a single chromosome from C. abyssinca) were obtained from the F(2) progeny of the asymmetric somatic hybrid. The alien chromosome from C. abyssinca in the addition line was clearly distinguished by genomic in situ hybridization (GISH). Twenty-seven microspore-derived plants from the addition lines were obtained. Fourteen seedlings were determined to be diploid plants (2n=38) arising from spontaneous chromosome doubling, while 13 seedlings were confirmed as haploid plants. Doubled haploid plants produced after treatment with colchicine and two disomic chromosome addition lines (2n=40, AACC plus a single pair of homologous chromosomes from C. abyssinca) could again be identified by GISH analysis. The lines are potentially useful for molecular genetic analysis of novel C. abyssinica genes or alleles contributing to traits relevant for oilseed rape (B. napus) breeding.

Agropyron elongatum chromatin localization on the wheat chromosomes in an introgression line

The introgressed small-chromosome segment of Agropyron elongatum (Host.) Neviski (Thinopyrum ponticum Podp.) in F5 line II-1-3 of somatic hybrid between common wheat (Triticum aestivum L.) and A. elongatum was localized by sequential fluorescence in situ hybridization (FISH), genomic in situ hybridization (GISH) and karyotype data. Karyotype analysis offered basic data of arm ratios and relative lengths of 21 pairs of chromosomes in parent wheat Jinan177 and hybrid II-1-3. Using special high repetitive sequences pSc119.2 and pAs1 for FISH, the entire B- and D-genome chromosomes were detected. The FISH pattern of hybrid II-1-3 was the same as that of parent wheat. GISH using whole genomic DNA from A. elongatum as probe determined the alien chromatin. Sequential GISH and FISH, in combination with some of the karyotype data, localized the small chromosome segments of A. elongatum on the specific sites of wheat chromosomes 2AL, 1BL, 5BS, 1DL, 2DL and 6DS. FISH with probe OPF-03(1296) from randomly amplified polymorphic DNA (RAPD) detected E-genome chromatin of A. elongatum, which existed in all of the small chromosome segments introgressed. Microsatellite primers characteristic for the chromosome arms above were used to check the localization and reveal the genetic identity. These methods are complementary and provide comprehensive information about the genomic constitution of the hybrid. The relationship between hybrid traits and alien chromatin was discussed.

Genetic analysis of citrus leafminer susceptibility

Damage caused by the citrus leafminer (CLM), Phyllocnistis citrella, is highly dependent on the citrus flushing pattern. Chemical control is only required in young trees, both in nurseries and in newly established orchards. However, this situation is completely different in countries where the causal agent of citrus canker, the bacterium Xanthomonas axonopodis pv. citri exists. CLM infestation results in a higher incidence of citrus canker infection. Among preventive control strategies that provide environmentally sound and sustainable solutions, resistant or tolerant varieties remain the most economical means of insect control. The objective of the present study is to genetically analyse the resistance/susceptibility to CLM and two other traits that might be related, the deciduous behaviour and leaf area of the tree, in a progeny of citradias derived from the cross between two species with different CLM susceptibility--C. aurantium L. and Poncirus trifoliata--using linkage maps of each parent that include several resistance gene analogues. We detected two antibiosis and six antixenosis putative quantitative trait loci (QTLs) in a random sample of forty-two of those citradias. An important antibiosis QTL (R2=18.8-26.7%) affecting both percentage of infested leaves and number of pupal casts per leaf has been detected in P. trifoliata linkage group Pa7, which is in agreement with the CLM antibiotic character shown by this species, and independent from any segregating QTL involved in its deciduous behaviour. The maximum value for the Kruskal-Wallis statistic of the other putative antibiosis QTL coincides with marker S2-AS4_800 in sour orange linkage map. Given that the sequence of this marker is highly similar to several nucleotide binding site-leucine-rich repeat (NBS-LRR)-type resistance genes, it might be considered as a candidate gene for insect resistance in citrus.

Plant protoplasts: status and biotechnological perspectives

Plant protoplasts ("naked" cells) provide a unique single cell system to underpin several aspects of modern biotechnology. Major advances in genomics, proteomics, and metabolomics have stimulated renewed interest in these osmotically fragile wall-less cells. Reliable procedures are available to isolate and culture protoplasts from a range of plants, including both monocotyledonous and dicotyledonous crops. Several parameters, particularly the source tissue, culture medium, and environmental factors, influence the ability of protoplasts and protoplast-derived cells to express their totipotency and to develop into fertile plants. Importantly, novel approaches to maximise the efficiency of protoplast-to-plant systems include techniques already well established for animal and microbial cells, such as electrostimulation and exposure of protoplasts to surfactants and respiratory gas carriers, especially perfluorochemicals and hemoglobin. However, despite at least four decades of concerted effort and technology transfer between laboratories worldwide, many species still remain recalcitrant in culture. Nevertheless, isolated protoplasts are unique to a range of experimental procedures. In the context of plant genetic manipulation, somatic hybridisation by protoplast fusion enables nuclear and cytoplasmic genomes to be combined, fully or partially, at the interspecific and intergeneric levels to circumvent naturally occurring sexual incompatibility barriers. Uptake of isolated DNA into protoplasts provides the basis for transient and stable nuclear transformation, and also organelle transformation to generate transplastomic plants. Isolated protoplasts are also exploited in numerous miscellaneous studies involving membrane function, cell structure, synthesis of pharmaceutical products, and toxicological assessments. This review focuses upon the most recent developments in protoplast-based technologies.

Cytogenetic characterization and fae1 gene variation in progenies from asymmetric somatic hybrids between Brassica napus and Crambe abyssinica

Sexual progenies of asymmetric somatic hybrids between Brassica napus and Crambe abyssinica were analyzed with respect to chromosomal behavior, fae1 gene introgression, fertility, and fatty-acid composition of the seed. Among 24 progeny plants investigated, 11 plants had 38 chromosomes and were characterized by the occurrence of normal meiosis with 19 bivalents. The other 13 plants had more than 38 chromosomes, constituting a complete chromosomal set from B. napus plus different numbers of additional chromosomes from C. abyssinica. The chromosomes of B. napus and C. abyssinica origin could be clearly discriminated by genomic in situ hybridization (GISH) in mitotic and meiotic cells. Furthermore, meiotic GISH enabled identification of intergenomic chromatin bridges and of asynchrony between the B. napus and C. abyssinca meiotic cycles. Lagging, bridging and late disjunction of univalents derived from C. abyssinica were observed. Analysis of cleaved amplified polymorphic sequence (CAPS) markers derived from the fae1 gene showed novel patterns different from the B. napus recipient in some hybrid offspring. Most of the progeny plants had a high pollen fertility and seed set, and some contained significantly greater amounts of seed erucic acid than the B. napus parent. This study demonstrates that a part of the C. abyssinica genome can be transferred into B. napus via asymmetric hybridization and maintained in sexual progenies of the hybrids. Furthermore, it confirms that UV irradiation improves the fertility of the hybrid and of its sexual progeny via chromosomal elimination and facilitates the introgression of exotic genetic material into crop species.Key words: asymmetric somatic hybrid, Brassica napus, Crambe abyssinica, cytogenetics, fae1 gene.