Characterization of sulfonated azo dyes and aromatic amines by pyrolysis gas chromatography/mass spectrometry

Broken into pieces: The challenges of determining sulfonated azo dyes in biological reactor effluents using LC-ESI-MS/MS analysis

Most studies on the biodegradation of textile azo dyes use color as parameter for measuring the efficiency of degradation. Although widely employed, spectrophotometric methods are susceptible to the interference of metabolites or degradation products from the biological treatment. We propose a method for determination of a model sulfonated azo dye (Direct Black 22, DB22) in wastewater using solid-phase extraction (SPE) and liquid chromatography - electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS). MS analysis in negative electrospray ionization mode showed DB22 as the most abundant precursor ion, corresponding to [M-3Na + H]^2-, which yields two radical anions of m/z 370.1 and m/z 645 after MS/MS fragmentation by collision-induced dissociation (CID). Calibration curve presented adequate linearity and precision in the range of 120-1500 ng mL^-1, and recovery and detection limit were appropriate to the typically employed working concentrations. Nevertheless, we observed that standard heating of DB22 under alkaline conditions to simulate the production of wastewater during dye-baths resulted in loss of MS/MS signal, without affecting color. Further analysis showed that DB22 undergoes hydrolysis and does not remain unaltered in solution. Alternative methods of hydrolysis evaluated resulted in no MS/MS signal as well. SPE-LC-ESI-MS/MS analysis evidenced the structural change of DB22 in aqueous solution while the dyeing-capacity was preserved. This technique has also the potential of being tailored to consider the detection of the hydrolyzed fragments of azo dyes in wastewater for appropriate quantification, but it was not the scope of the current step of this research. Color remains as a more reliable parameter for monitoring azo compounds which are unstable in aqueous solution, while a more robust and holistic method needs to be developed for the speciation of the DB22 products of thermal hydrolysis.

Biochemical characterization of a novel azo reductase named BVU5 from the bacterial flora DDMZ1: application for decolorization of azo dyes

One of the main mechanisms of bacterial decolorization and degradation of azo dyes is the use of biological enzymes to catalyze the breaking of azo bonds. This paper shows the expression and properties of a novel azo reductase (hybrid-cluster NAD(P)-dependent oxidoreductase, accession no. A0A1S1BVU5, named BVU5) from the bacterial flora DDMZ1 for degradation of azo dyes. The molecular weight of BVU5 is about 40.1 kDa, and it contains the prosthetic group flavin mononucleotide (FMN). It has the decolorization ability of 80.1 ± 2.5% within 3 min for a dye concentration of 20 mg L⁻¹, and 53.5 ± 1.8% even for a dye concentration of 200 mg L⁻¹ after 30 min. The optimum temperature of enzyme BVU5 is 30 °C and the optimum pH is 6. It is insensitive to salt concentration up to a salinity level of 10%. Furthermore, enzyme BVU5 has good tolerance toward some metal ions (2 mM) such as Mn²⁺, Ca²⁺, Mg²⁺ and Cu²⁺ and some organic solvents (20%) such as DMSO, methanol, isopentyl, ethylene glycol and N-hexane. However, the enzyme BVU5 has a low tolerance to high concentrations of denaturants. In particular, it is sensitive to the denaturants guanidine hydrochloride (GdmCl) (2 M) and urea (2 M). Analysis of the dye substrate specificity shows that enzyme BVU5 decolorizes most azo dyes, which is indicating that the enzyme is not strictly substrate specific, it is a functional enzyme for breaking the azo structure. Liquid chromatography/time-of-flight/mass spectrometry (LC-TOF-MS) revealed after the action of enzyme BVU5 that some intermediate products with relatively large molecular weights were produced; this illustrates a symmetric or an asymmetric rapid cleavage of the azo bonds by this enzyme. The potential degradation pathways and the enzyme-catalyzed degradation mechanism are deduced in the end of this paper. The results give insight into the potential of a rapid bio-pretreatment by enzyme BVU5 for processing azo dye wastewater.

The combination of BVU5 enzyme and coenzyme NADH can quickly degrade the azo dye RB5.

Discoloration of Historical Plastic Objects: New Insight into the Degradation of β-Naphthol Pigment Lakes

Light is a determining factor in the discoloration of plastics, and photodegradation processes can affect the molecular structures of both the polymer and colorants. Limited studies focused on the discoloration of heritage plastics in conservation science. This work investigated the discoloration of red historical polyethylene (PE) objects colored with PR 48:2 and PR 53:1. High-density and low-density PE reference polymers, neat pigment powders, and historical samples were assessed before and after accelerated photoaging. The applied methodology provided insight into the individual light-susceptibility of polyethylenes, organic pigment lakes, and their combined effect in the photoaging of historical plastic formulations. After light exposure, both PE references and historical samples yellowed, PR53:1 faded, and PR 48:2 darkened; however, both organic pigments faded severely in the historical samples. This highlights the role played by the plastic binder likely facilitating the pigment photofading. Fourier transform infrared spectroscopy and mass spectrometry techniques-EGA-MS, PY-GC/MS, and TD-GC/MS-were successfully employed for characterizing the plastic formulations and degradation. The identification of phthalic compounds in both aged β-naphthol powders opens new venues for studies on their degradation. This work's approach and analytical methods in studying the discoloration of historical plastics are novel, proving their efficacy, reliability, and potentiality.

Investigating the fragmentation pathways of β-naphthol pigments using liquid chromatography/electrospray ionization quadrupole time-of-flight mass spectrometry

RATIONALE

Today, β-naphthol pigments are among the largest and most widely used classes of synthetic organic pigments. Their application fields range from textiles, food and beverages, printing inks, plastics to paint formulations. Most of the research dealing with their study using mass spectrometry focuses on developing sensitive methods for their quantification or their removal from industrial wastewater. Their qualitative recognition in formulations, whose composition is undisclosed by manufacturers, has not been tackled yet.

METHODS

The collision-induced dissociation fragmentation pathways of 10 red and orange widely used pigments of the late 19th to the early 20th centuries, belonging to the β-naphthol and Naphthol AS classes, were characterized using liquid chromatography/electrospray ionization quadrupole time-of-flight mass spectrometry in negative-ion mode.

RESULTS

The fragmentation pathways of these pigments were determined, and the pigments are discussed in relation to their chemical structures. The results were used to determine the composition in terms of the secondary components of one of our reference commercial formulations, characterized by a complex mixture of synthesis by-products.

CONCLUSIONS

By coupling the high sensitivity of high-resolution mass spectrometry with an efficient chromatographic separation optimized for the analysis of β-naphthol dyes and pigments, we provided a method for the qualitative recognition of this class of molecules in unknown formulations possibly used in different kinds of industrial and synthetic products.

Microbial degradation of azo dye carmoisine in aqueous medium using Saccharomyces cerevisiae ATCC 9763

Carmoisine is an azo dye widely used in many industries, and therefore frequently occurs in the effluent of many factories. To our knowledge, biological degradation of carmoisine has received little attention. The present study investigates the capability of Saccharomyces cerevisiae ATCC 9763 for degradation of carmoisine. Spectrophotometry data indicates that carmoisine (50 mg/l) was eliminated from the aqueous medium after approximately 7 h of incubation with Saccharomyces under anaerobic shaking conditions. Thin layer chromatography (TLC) revealed the removal of carmoisine as well as the appearance of aromatic amines in samples collected from the decolourized medium by S. cerevisiae and this was subsequently confirmed by Fourier transform infrared (FTIR) spectroscopy. Liquid chromatography mass spectrometry (LC/MS) was carried out on fractions from consecutive column chromatography and two-dimensional (2D) chromatography. LC/MS indicated degradation of carmoisine into its constituent aromatic amines. In addition, investigating the effect of environmental conditions on the decolourization process indicated that yeast extract could positively affect decolourization rates; shaking significantly accelerated decolourization and shortened the time required for complete biodecolourization from ≃ 8 days to ≃ 7 h; and Saccharomyces was able to consume sucrose as a carbon source and remove the carmoisine despite the presence of sunset yellow, which remained unaffected.

Genotoxic and carcinogenic products arising from reductive transformations of the azo dye, Disperse Yellow 7

Selected aromatic azo and benzidine based dyes are priority compounds under the Government of Canada's Chemical Management Plan (CMP) for environmental risk assessments. Organic compounds undergo chemical and biological transformations when they interact with environmental matrices and biotic species; identifying the transformation products is thus a critical component of the risk assessment process. Here, we used zero valent iron (ZVI) to initiate the reduction of the diazo compound dye Disperse Yellow 7 (DY 7). Using state-of-the-art accurate mass Liquid Chromatography-Quadrupole Time of Flight-Mass Spectroscopy (LC-QToF-MS), four transformation products were conclusively identified, while a fifth product was tentatively ascertained. The conclusively established transformation products included p-phenylenediamine (p-PDA, a known genotoxin), 4-aminoazobenzene (4-AAB, a category 2 carcinogen) and 4-aminobiphenyl (4-ABP, a category 1 human carcinogen). 4-ABP is thought to form via a benzidine rearrangement; this is the first report of DY 7 undergoing a benzidine rearrangement. Given the importance of reduction processes in the metabolism of organic contaminants by aquatic species, we used LC-MS/MS to analyze sediment samples that had been generated previously upon exposure of Western clawed frogs (Silurana tropicalis) to DY 7 (at exposure levels where cellular stress was observed in S. tropicalis). We found p-PDA, 4-AAB, and 4-ABP were present in all exposures, but not in any of the sediment controls, demonstrating that upon release of DY 7 to the aquatic environment, sediment dwelling organisms will metabolize DY 7 to generate known (and suspected) human carcinogens, including through a previously unreported in vivo benzidine rearrangement to produce 4-ABP.

Rapid separation and sensitive determination of banned aromatic amines with plastic microchip electrophoresis

Rapid analysis of trace amount of aromatic amines in environmental samples and daily necessities has attracted considerable attentions because some of them are strongly toxic and carcinogenic. In this study, fast and efficient electrophoretic separation and sensitive determination of 5 banned aromatic amines were explored for practical analysis using disposable plastic microchips combined with a low-cost laser-induced fluorescence detector. The effect of running buffer and its additive was systematically investigated. Under the selected condition, 5 fluorescein isothiocyanate labeled aromatic amines could be baseline separated within 90s by using a 10mmol/L borate buffer containing 2% (w/v) hydroxypropyl cellulose. Calibration curves of peak areas vs. concentrations were linear up to 40 or 120μmol/L for different analytes and limits of detection were in a range of 1-3nmol/L. Theoretical plate numbers of 6.8-8.5×10(5)/m were readily achieved. The method exhibited good repeatability, relative standard deviations (n=5) of peak areas and migration times were no more than 4.6% and 0.9%, respectively. The established method was successfully applied in the quantitative analysis of these banned aromatic amines in real samples of waste water and textile, recoveries of added standards were 85-110%.

Occurrence of aromatic amines and N-nitrosamines in the different steps of a drinking water treatment plant

The occurrence of 24 amines within a full scale drinking water treatment plant that used chlorinated agents as disinfectants was evaluated for the first time in this research. Prior to any treatment (raw water), aniline, 3-chloroaniline, 3,4-dichloroaniline and N-nitrosodimethylamine were detected at low levels (up to 18 ng/L) but their concentration increased ∼10 times after chloramination while 9 new amines were produced (4 aromatic amines and 5 N-nitrosamines). Within subsequent treatments, there were no significant changes in the amine levels, although the concentrations of 2-nitroaniline, N-nitrosodimethylamine and N-nitrosodiethylamine increased slightly within the distribution system. Eleven of the 24 amines studied were undetected either in the raw and in the treatment plant samples analysed. There is an important difference in the behaviour of the aromatic amines and N-nitrosamines with respect to water temperature and rainfall events. Amine concentrations were higher in winter due to low water temperatures, this effect being more noticeable for N-nitrosamines. Aromatic amines were detected at their highest concentrations (especially 3,4-dichloroaniline and 2-nitroaniline) in treated water after rainfall events. These results may be explained by the increase in the levels of amine precursors (pesticides and their degradation products) in raw water since the rainfall facilitated the transport of these compounds from soil which was previously contaminated as a result of intensive agricultural practices.

Using chemical reactivity to provide insights into environmental transformations of priority organic substances: the Fe⁰-mediated reduction of Acid Blue 129

Sulfonated anthracenedione dyes are medium priority organic compounds targeted for environmental assessment under the Government of Canada's Chemical Management Plan (CMP). Since organic compounds undergo transformations in environmental matrices, understanding these transformations is critical for a proper assessment of their environmental fate. In the current study, we used zero-valent iron (ZVI) to provide insight into reductive transformation processes available to the anthracenedione dye, Acid Blue 129 (AB 129), a dye which is used in the textile industry. At high temperatures, we found that AB 129 was rapidly reduced (within 3 h) after being adsorbed onto the ZVI-surface, whereupon decomposition took place via multiple competitive and consecutive reaction pathways. Reaction products were identified using state-of-the-art accurate mass Liquid Chromatography-Quadrupole Time of Flight-Mass Spectroscopy (LC-QToF-MS). Five transformation products were identified, including a genotoxic (and thus, potentially carcinogenic) end-product, 2,4,6-trimethylaniline. The same products were found at room temperature, demonstrating that the transformation pathways revealed here could plausibly arise from biological and/or environmental reductions of AB 129. Our results demonstrate the importance of identifying reaction product arising from priority substances as part of the environmental risk assessment process.

The identification of synthetic organic pigments in modern paints and modern paintings using pyrolysis-gas chromatography-mass spectrometry

A collection of more than 70 synthetic organic pigments were analysed using pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS). We report on the analysis of diketo-pyrrolo-pyrrole, isoindolinone and perylene pigments which are classes not previously reported as being analysed by this technique. We also report on a number of azo pigments (2-naphthol, naphthol AS, arylide, diarylide, benzimidazolone and disazo condensation pigments) and phthalocyanine pigments, the Py-GC-MS analysis of which has not been previously reported. The members of each class were found to fragment in a consistent way and the pyrolysis products are reported. The technique was successfully applied to the analysis of paints used by the artist Francis Bacon (1909-1992), to simultaneously identify synthetic organic pigments and synthetic binding media in two samples of paint taken from Bacon's studio and micro-samples taken from three of his paintings and one painting attributed to him.

Characterisation of permanent markers by pyrolysis gas chromatography-mass spectrometry

Pyrolysis gas chromatography-mass spectrometry (PyGC-MS) was used as a rapid method for the characterization of permanent marker ink. Twenty-four samples of various colours purchased from different manufacturers were characterised. Four main typologies of polymer-binding medium could be distinguished on the basis of the pyrolysis products, and differentiation between permanent markers of different manufacturers could be accomplished. For some permanent marker samples, PyGC-MS analysis allowed pigment identification as well.