Mechanisms and measurements of nanomaterial-induced oxidative damage to DNA

New methodological developments for testing the in vitro genotoxicity of nanomaterials: Comparison of 2D and 3D HepaRG liver cell models and classical and high throughput comet assay formats

Nanomaterials (NMs) are defined as materials with at least one external dimension below 100 nm. Their small size confers them interesting unique physico-chemical properties, hence NMs are increasingly used in a diversity of applications. However, the specific properties of NMs could also make them more harmful than their bulk counterparts. Therefore, there is a crucial need to deliver efficient NM hazard assessment in order to sustain the responsible development of nanotechnology. This study analysed the genotoxic potential of several NMs: one titanium dioxide (TiO2) and two zinc oxide NMs (ZnO) that were tested up to 100 μg/mL on 2D and 3D hepatic HepaRG models. Genotoxicity analysis was performed comparing the alkaline comet assay in classical and high throughput formats. Moreover, oxidative DNA lesions were investigated with the Fpg-modified comet assay. Results showed that TiO2 NMs were not cytotoxic and not genotoxic in either cell model, although a small increase in the % tail DNA was observed in 3D HepaRG cells at 100 μg/mL in the classical format. The two ZnO NMs (ZnO S. NMs a commercial suspension and NM110 provided by the European Union Joint Research Centre) induced a concentration-dependent increase in cytotoxicity that was more pronounced in the 2D (>20% cytotoxicity was observed for ZnO S. at concentrations greater than 25 μg/mL, and for NM 110 at 50 μg/mL) than in the 3D model (more than 20% cytotoxicity for ZnO S. NMs at 50 μg/mL). While ZnO S. NMs induced DNA damage associated with cytotoxicity (at 25 and 50 μg/mL in 2D and 50 μg/mL in 3D), NM110 showed a clear genotoxic effect at non-cytotoxic concentrations (25 μg/mL in 2D and at 25 and 50 μg/mL in 3D). No major differences could be observed in the comet assay in the presence or absence of the Fpg enzyme. High throughput analysis using CometChip® mostly confirmed the results obtained with the classical format, and even enhanced the detection of genotoxicity in the 3D model. In conclusion, this study demonstrated that new approach methodologies (NAMs), 3D models and the high throughput format for the comet assay, were more efficient in the detection of genotoxic effects, and are therefore promising approaches to improve hazard assessment of NMs.

Does functionalised nanoplastics modulate the cellular and physiological responses of aquatic fungi to metals?

Co-contamination of freshwaters by nanoplastics (NPs; ≤ 1 μm) and metals is an emerging concern. Aquatic hyphomycetes play a crucial role as primary decomposers in these ecosystems. However, concurrent impacts of NPs and metals on the cellular and physiological activities of these fungi remain poorly understood. Here, the effects of environmentally realistic concentrations of two types of polystyrene (PS) NPs (bare and -COOH; up to 25 μg L-1) and copper (Cu; up to 50 μg L-1) individually and all possible combinations (NPs types and Cu) on Articulospora tetracladia, a prevalent aquatic hyphomycete, were investigated. Endpoints measured were intracellular reactive oxygen species accumulation, plasma membrane disruption and fungal growth. The results suggest that functionalised (-COOH) NPs enhance Cu adsorption, as revealed by spectroscopic analyses. Notably, NPs, Cu and their co-exposure to A. tetracladia can lead to ROS accumulation and plasma membrane disruption. In most cases, exposure to treatments containing -COOH NPs with Cu showed greater cellular response and suppressed fungal growth. By contrast, exposure to Cu individually showed stimulatory effects on fungal growth. Overall, this study provides novel insight that functionalisation of NPs facilitates metal adsorption, thus modulating the impacts of metals on aquatic fungi.

Nanotoxicity of multifunctional stoichiometric cobalt oxide nanoparticles (SCoONPs) with repercussions toward apoptosis, necrosis, and cancer necrosis factor (TNF-α) at nano-biointerfaces

Introduction

Apoptosis, necrosis, and cancer necrosis factor (TNF-a) are all impacted by the nanotoxicity of multifunctional stoichiometric cobalt oxide nanoparticles (SCoONPs) at nano-biointerfaces. The creation of multi-functional nanoparticles has had a considerable impact on the transport of drugs and genes, nanotheranostics (in-vivo imaging, concurrent diagnostics), interventions for external healing, the creation of nano-bio interfaces, and the instigation of desired changes in nanotherapeutics.

Objectives

The quantitative structure-activity relationships, chemical transformations, biological interactions as well as toxicological analyses are considered as main objectives. Discrete dimensions of SCoNPs-cell interaction interfaces, their characteristic physical features (size, shape, shell structure, and surface chemistry), impact on cell proliferation and differentiation are the key factors responsible for nanotoxicity.

Methods

The development of multi-functional nanoparticles has been significant in drug/gene delivery, nanotheranostics (in-vivo imaging, coinciding diagnostics), and external healing interventions, designing a nano-bio interface, as well as inciting desired alterations in nanotherapeutics. Every so often, the cellular uptake of multi-functional cobalt [Co, CoO, Co2(CO)8 and Co3O4] nanoparticles (SCoONPs) influences cellular mechanics and initiates numerous repercussions (oxidative stress, DNA damage, cytogenotoxicity, and chromosomal damage) in pathways, including the generation of dysregulating factors involved in biochemical transformations.

Results

The concerns and influences of multifunctional SCoNPs on different cell mechanisms (mitochondria impermeability, hydrolysis of ATP, the concentration of Ca2+, impaired calcium clearance, defective autophagy, apoptosis, and necrosis), and interlinked properties (adhesion, motility, and internalization dynamics, role in toxicity, surface hydrophilic and hydrophobicity, biokinetics and biomimetic behaviors of biochemical reactions) have also been summarized. SCoONPs have received a lot of interest among the nanocarriers family because of its advantageous qualities such as biodegradability, biocompatibility, nontoxicity, and nonimmunogenicity.

Conclusion

Various applications, such as bio-imaging, cell labeling, gene delivery, enhanced chemical stability, and increased biocompatibility, concerning apoptosis, necrosis, and nano-bio interfaces, along with suitable examples. In this analysis, the multi-functional cobalt [Co, CoO, Co2(CO)8 and Co3O4] nanoparticles (SCoNPs) intricacies (cytogenotoxicity, clastogenicity, and immunomodulatory), nanotoxicity, and associated repercussions have been highlighted and explained.

Elucidating the insecticidal mechanisms of zein nanoparticles on Anticarsia gemmatalis (Lepidoptera: Erebidae)

Previous research suggested that positively charged zein nanoparticles [(+)ZNP] were toxic to neonates of Anticarsia gemmatalis Hübner and deleterious to noctuid pests. However, specific modes of action for ZNP have not been elucidated. Diet overlay bioassays attempted to rule out the hypothesis that A. gemmatalis mortality was caused by surface charges from component surfactants. Overlay bioassays indicated that negatively charged zein nanoparticles [(-)ZNP] and its anionic surfactant, sodium dodecyl sulfate (SDS), exhibited no toxic effects when compared to the untreated check. Nonionic zein nanoparticles [(N)ZNP] appeared to increase mortality compared to the untreated check, though larval weights were unaffected. Overlay results for (+)ZNP and its cationic surfactant, didodecyldimethylammonium bromide (DDAB), were found to be consistent with former research indicating high mortalities, and thus, dosage response curves were conducted. Concentration response tests found the LC50 for DDAB on A. gemmatalis neonates was 208.82 a.i./ml. To rule out possible antifeedant capabilities, dual choice assays were conducted. Results indicated that neither DDAB nor (+)ZNP were antifeedants, while SDS reduced feeding when compared to other treatment solutions. Oxidative stress was tested as a possible mode of action, with antioxidant levels used as a proxy for reactive oxygen species (ROS) in A. gemmatalis neonates, which were fed diet treated with different concentrations of (+)ZNP and DDAB. Results indicated that both (+)ZNP and DDAB decreased antioxidant levels compared to the untreated check, suggesting that both (+)ZNP and DDAB may inhibit antioxidant levels. This paper adds to the literature on potential modes of action by biopolymeric nanoparticles.

Standards for Quantitative Measurement of DNA Damage in Mammalian Cells

As the potential applications of DNA diagnostics continue to expand, there is a need for improved methods and standards for DNA analysis. This report describes several methods that could be considered for the production of reference materials for the quantitative measurement of DNA damage in mammalian cells. With the focus on DNA strand breaks, potentially useful methods for assessing DNA damage in mammalian cells are reviewed. The advantages and limitations of each method, as well as additional concerns with respect to reference material development, are also discussed. In conclusion, we outline strategies for developing candidate DNA damage reference materials that could be adopted by research laboratories in a wide variety of applications.

Metal-Based Nanoparticles and Their Relevant Consequences on Cytotoxicity Cascade and Induced Oxidative Stress

Emerging nanoscience allows us to take advantage of the improved evolutionary components and apply today’s advanced characterization and fabrication techniques to solve environmental and biological problems. Despite the promise that nanotechnology will improve our lives, the potential risks of technology remain largely uncertain. The lack of information on bio-impacts and the absence of consistent standards are the limitations of using metal-based nanoparticles (mNPs) for existing applications. To analyze the role played by the mNPs physicochemical characteristics and tactics to protect live beings, the field of nanotoxicology nowadays is focused on collecting and analyzing data from in vitro and in vivo investigations. The degree of reactive oxygen species (ROS) and oxidative stress caused by material nanoparticles (NPs) depends on many factors, such as size, shape, chemical composition, etc. These characteristics enable NPs to enter cells and interact with biological macromolecules and cell organelles, resulting in oxidative damage, an inflammatory response, the development of mitochondrial dysfunction, damage to genetic material, or cytotoxic effects. This report explored the mechanisms and cellular signaling cascades of mNPs-induced oxidative stress and the relevant health consequences.

Inhibition of human APE1 and MTH1 DNA repair proteins by dextran-coated γ-Fe2O3 ultrasmall superparamagnetic iron oxide nanoparticles

Aim: To quantitatively evaluate the inhibition of human DNA repair proteins APE1 and MTH1 by dextran-coated γ-Fe₂O₃ ultrasmall superparamagnetic iron oxide nanoparticles (dUSPIONs). Materials & methods: Liquid chromatography-tandem mass spectrometry with isotope-dilution was used to measure the expression levels of APE1 and MTH1 in MCL-5 cells exposed to increasing doses of dUSPIONs. The expression levels of APE1 and MTH1 were measured in cytoplasmic and nuclear fractions of cell extracts. Results: APE1 and MTH1 expression was significantly inhibited in both cell fractions at the highest dUSPION dose. The expression of MTH1 was linearly inhibited across the full dUSPION dose range in both fractions. Conclusion: These findings warrant further studies to characterize the capacity of dUSPIONs to inhibit other DNA repair proteins in vitro and in vivo.

Ingestion of titanium dioxide nanoparticles: a definite health risk for consumers and their progeny

Titanium dioxide (TiO₂) is one of the most commonly used nanomaterials in the world. Additive E171, which is used in the food industry, contains a nanometric particle fraction of TiO₂. Oral exposure of humans to these nanoparticles (NPs) is intensive, leading to the question of their impact on health. Daily oral intake by rats of amounts of E171 that are relevant to human intake has been associated with an increased risk of chronic intestinal inflammation and carcinogenesis. Due to their food preferences, children are very exposed to this NP. Furthermore, maternal-foetal transfer of TiO₂ NPs during pregnancy, as well as exposure of the offspring by breastfeeding, have been recently described. In France, the use of E171 in the production of foodstuffs was suspended in January 2020 as a precautionary measure. To provide some answers to this public health problem and help global regulatory agencies finalize their decisions, we reviewed in vitro and in vivo studies that address the effects of TiO₂ NPs through oral exposure, especially their effects on the gastrointestinal tract, one of the most exposed tissues. Our review also highlights the effects of exposure on the offspring during pregnancy and by breastfeeding.

Materials, surfaces, and interfacial phenomena in nanoplastics toxicology research

In response to the growing worldwide plastic pollution problem, the field of nanoplastics research is attempting to determine the risk of exposure to nanoparticles amidst their ever-increasing presence in the environment. Since little is known about the attributes of environmental nanoplastics (concentration, composition, morphology, and size) due to fundamental limitations in detection and quantification of smaller plastic particles, researchers often improvise by engineering nanoplastic particles with various surface modifications as models for laboratory toxicological testing. Polystyrene and other commercially available or easily synthesized polymer materials functionalized with surfactants or fluorophores are typically used for these studies. How surfactants, additives, fluorophores, the addition of surface functional groups for conjugation, or other changes to surface attributes alter toxicological profiles remains unclear. Additionally, the limited polymers used in laboratory models do not mimic the vast range of polymer types comprising environmental pollutants. Nanomaterials are tricky materials to investigate due to their high surface area, high surface energies, and their propensity to interact with molecules, proteins, and biological probes. These unique properties can often invalidate common laboratory assays. Extreme care must be taken to ensure that results are not artefactual. We have gathered zeta potential values for various polystyrene nanoparticles with different functionalization, in different solvents, from the reported literature. We also discuss the effects of surface engineering and solvent properties on interparticle interactions, agglomeration, particle-protein interactions, corona formation, nano-bio interfaces, and contemplate how these parameters might confound results. Various toxicological exemplars are critically reviewed, and the relevance and shortfalls of the most popular models used in nanoplastics toxicity studies published in the current literature are considered.

Differential effects of biogenic and chemically synthesized silver-nanoparticles application on physiological traits, antioxidative status and californidine content in California poppy (Eschscholzia californica Cham)

Silver nanoparticles (AgNPs) of both biologically and chemically origins trigger various physiological and metabolic processes through interaction with plant cells, exerting positive, negative and inconsequential effects. However, their impacts on plant systems must be critically investigated to guarantee their safe application in food chain. In this study, the effects of chemically synthesized (synthetic) AgNPs (sAgNPs) and biologically synthesized (biogenic) AgNPs (bAgNPs) on physiological and biochemical features of Eschscholzia californica Cham were evaluated at different concentrations (0, 10, 25, 50 and 100 mg L^-1). Plants exposed to bAgNPs (at 10 and 25 mg L^-1) and sAgNPs (at 10 mg L^-1) displayed relatively uniform deposition of AgNPs on leaf surface, however, the higher concentration (100 mg L^-1) was accompanied by aggregation of AgNPs, resulting in anatomical and physiological disorders. Foliar application of both AgNPs at lower concentrations resulted in significant (P < 0.01) improve in the content of photosynthetic pigments (chlorophylls a, b, a+b, and carotenoids) and total phenolics over the control in a dose-related manner. Leaf relative water content decreased steadily with increasing both sAgNPs and bAgNPs concentrations-with sAgNPs being more inhibitive. Both types of AgNPs at 100 mg L^-1 significantly (P < 0.05) increased electrolyte leakage index, level of lipid peroxidation product (malondialdehyde), and leaf soluble sugar content when compared to controls. No significant difference was found on cell membrane stability index among the plants exposed to bAgNPs and sAgNPs at the lowest concentration over the control. Californidine content was significantly (P < 0.01, by 45.1%) increased upon all the bAgNPs treatments (with a peak at 25 mg L^-1) relative to control. The obtained extracts from plants treated with bAgNPs at lower concentrations revealed a significant induction of antioxidant capacity (based on DPPH˙ free radical scavenging and ferrous ions-chelating activities) with lower IC₅₀ values compared to the other treatments. Conclusively, bAgNPs at lower concentrations are potent elicitors of pharmaceutically active compounds biosynthesis, which enhance physiological efficiency of E. californica, but at higher concentrations bAgNPs are equally toxic as sAgNPs.

Potential toxicity of nanoparticles on the reproductive system animal models: A review

Over the past two decades, nanotechnology has been involved in an array of applications in various fields, including diagnostic kits, disease treatment, drug manufacturing, drug delivery, and gene therapy. But concerns about the toxicity of nanoparticles have greatly hindered their use; also, due to their increasing use in various industries, all members of society are exposed to the toxicity of these nanoparticles. Nanoparticles have a negative impact on various organs, including the reproductive system. They also can induce abortion in women, reduce fetal growth and development, and can damage the reproductive system and sperm morphology in men. In some cases, it has been observed that despite the modification of nanoparticles in composition, concentration, and method of administration, there is still damage to the reproductive organs. Therefore, understanding how nanoparticles affect the reproductive system is of very importance. In several studies, the nanoparticle toxicity effect on the genital organs has been investigated at the clinical and molecular levels using the in vivo and in vitro models. This study reviews these investigations and provides important data on the toxicity, hazards, and safety of nanoparticles in the reproductive system to facilitate the optimal use of nanoparticles in the industry.

The Heating Efficiency and Imaging Performance of Magnesium Iron Oxide@tetramethyl Ammonium Hydroxide Nanoparticles for Biomedical Applications

Multifunctional magnetic nanomaterials displaying high specific loss power (SLP) and high imaging sensitivity with good spatial resolution are highly desired in image-guided cancer therapy. Currently, commercial nanoparticles do not sufficiently provide such multifunctionality. For example, Resovist® has good image resolution but with a low SLP, whereas BNF® has a high SLP value with very low image resolution. In this study, hydrophilic magnesium iron oxide@tetramethyl ammonium hydroxide nanoparticles were prepared in two steps. First, hydrophobic magnesium iron oxide nanoparticles were fabricated using a thermal decomposition technique, followed by coating with tetramethyl ammonium hydroxide. The synthesized nanoparticles were characterized using XRD, DLS, TEM, zeta potential, UV-Vis spectroscopy, and VSM. The hyperthermia and imaging properties of the prepared nanoparticles were investigated and compared to the commercial nanoparticles. One-dimensional magnetic particle imaging indicated the good imaging resolution of our nanoparticles. Under the application of a magnetic field of frequency 614.4 kHz and strength 9.5 kA/m, nanoparticles generated heat with an SLP of 216.18 W/g, which is much higher than that of BNF (14 W/g). Thus, the prepared nanoparticles show promise as a novel dual-functional magnetic nanomaterial, enabling both high performance for hyperthermia and imaging functionality for diagnostic and therapeutic processes.

Nonspherical Metal-Based Nanoarchitectures: Synthesis and Impact of Size, Shape, and Composition on Their Biological Activity

Metal-based nanoentities, apart from being indispensable research tools, have found extensive use in the industrial and biomedical arena. Because their biological impacts are governed by factors such as size, shape, and composition, such issues must be taken into account when these materials are incorporated into multi-component ensembles for clinical applications. The size and shape (rods, wires, sheets, tubes, and cages) of metallic nanostructures influence cell viability by virtue of their varied geometry and physicochemical interactions with mammalian cell membranes. The anisotropic properties of nonspherical metal-based nanoarchitectures render them exciting candidates for biomedical applications. Here, the size-, shape-, and composition-dependent properties of nonspherical metal-based nanoarchitectures are reviewed in the context of their potential applications in cancer diagnostics and therapeutics, as well as, in regenerative medicine. Strategies for the synthesis of nonspherical metal-based nanoarchitectures and their cytotoxicity and immunological profiles are also comprehensively appraised.

Mechanism of action and cellular responses of HEK293 cells on challenge with zwitterionic carbon dots

Carbon, an extremely versatile element has great demand in the field of nanoscience. Carbon-based nanostructures are exponentially increased due to its wide range of applications in biotechnological and environmental approaches; hence, its safety assessment is of greater concern. In the present study, high quantum yielding zwitterionic carbon dots were synthesized, characterized and its safety assessment at different concentration ranges (50-1600 μgmL^-1) on HEK 293 cells was carried out. Cellular, mitochondrial, lysosomal integrity and ROS generation were assessed using specific fluorochromes.The key cellular event apoptosis was assessed by annexinpropidium iodide staining using imaging flow cytometry. Moreover, the mRNA levels of the apoptotic genes were determined by real-time PCR. The results revealed that the cell viability assays (MTT, NR) and mitochondrial membrane potential were altered on exposure to a higher concentration of zwitterionic CDs for 24 h. Also, annexinpropidiumiodidestaining exhibited an increased percentage of apoptotic cells upon exposure to zwitterionic CDs at higher concentrations. Further, apoptosis was confirmed by significantlyincreased expression of pro-apoptotic gene (Bax) together with decreased expression of Bcl-2/Bax ratio. Collectively, this study suggests that zwitterionic CDs induce apoptosis in HEK 293 at higher concentration and the safe range for its intended application is found to be 50-200 μg/mL.

Therapeutic nanostructures and nanotoxicity

Nanotechnology, with its continuous advancement, leads to the development of nanoscale-level therapeutics to mitigate many complex diseases. This results in the emergence of numerous novel nanomaterials and its composite products into the market such as liposome, polymeric nanoparticles, dendrimers, and nanostructured lipid carrier. However, their application is always determined by a high benefit to risk ratio. Very few research have been done on the toxicity assessment of nanoparticles in the biological system; therefore, the limited knowledge regarding the toxicity profile of nanotherapeutics is available leading to the ignorance of its side effects. Nanoparticles can distribute in the whole body through translocating in the bloodstream by crossing membrane barriers efficiently and shows effect in organs and tissues at cellular and molecular levels. The interaction of nanoparticle with cell may consequences into nanotoxicity. The narrow size distribution, large surface area to mass ratio and surface properties of nanoparticle are significantly associated with nanotoxicity. Nanoparticles can enter into the tissue and cell by invading the membranes and cause cellular injury as well as toxicity. Therefore, the exploration of mechanisms of nanotoxicity has prime importance now a day. The toxicity assessment should be an integral part of the development of nanotherapeutics using various toxicity evaluation models. This review has focused on the exploration of different nanostructures for therapeutic delivery system along with its physicochemical characteristics responsible for adverse effects on human biology, various toxicity evaluation models, and environmental and regulatory hurdles.

Effects of metal nanoparticles on freshwater rotifers may persist across generations

Nanotechnology has become one of the fastest growing industries in the current century because nanomaterials (NMs) are present in an ever-expanding range of consumer products increasing the chance of their release into natural environments. In this study, the impacts of two metal nanoparticles (Ag-NPs and CuO-NPs) and their equivalent ionic forms (Ag⁺ and Cu²⁺) were assessed on the lentic freshwater rotifer Brachionus calyciflorus and on its ability to adapt and recover through generations. In our study, Ag-NPs and CuO-NPs inhibited the rotifer population growth rate and caused mortality at low concentrations (< 100 μg L^-1). Ag-NPs and CuO-NPs decreased in the medium when organisms were present (48 h exposure: 51.1 % and 66.9 %, respectively), similarly Ag⁺ and Cu²⁺ also decreased from medium in presence of the organisms (48 h: 35.2 % and 47.3 %, respectively); although the metal concentrations removed from the medium were higher for nanoparticles than metal ions, metal ions showed higher effects then their respective nanoparticle forms. Rotifer populations exposed for 4 generations to the toxicants were able to recover the population growth rate, but some rotifers showed developmental delay and inability to reproduce even after the removal of the toxicants. Intracellular accumulation of reactive oxygen species as well as plasma membrane damage were found in the rotifers at concentrations corresponding to EC₁₀ (Ag-NPs = 1.7 μg L^-1, Ag⁺ = 4.5 μg L^-1, CuO-NPs = 46.9 μg L^-1, Cu²⁺ = 35 μg L^-1) of the population growth rate. Our results showed, for the first time, that effects of metal nanoparticles and metal ions on rotifer populations may persist along several generations. This should be taken into account when assessing risks of metal nanoparticles in freshwaters.

Engineering Core-Shell Structures of Magnetic Ferrite Nanoparticles for High Hyperthermia Performance

Magnetic ferrite nanoparticles (MFNs) with high heating efficiency are highly desirable for hyperthermia applications. As conventional MFNs usually show low heating efficiency with a lower specific loss power (SLP), extensive efforts to enhance the SLP of MFNs have been made by varying the particle compositions, sizes, and structures. In this study, we attempted to increase the SLP values by creating core-shell structures of MFNs. Accordingly, first we synthesized three different types of core ferrite nanoparticle of magnetite (mag), cobalt ferrite (cf) and zinc cobalt ferrite (zcf). Secondly, we synthesized eight bi-magnetic core-shell structured MFNs; Fe₃O₄@CoFe₂O₄ (mag@cf₁, mag@cf₂), CoFe₂O₄@Fe₃O₄ (cf@mag₁, cf@mag₂), Fe₃O₄@ZnCoFe₂O₄ (mag@zcf₁, mag@zcf₂), and ZnCoFe₂O₄@Fe₃O₄ (zcf@mag₁, zcf@mag₂), using a modified controlled co-precipitation process. SLP values of the prepared core-shell MFNs were investigated with respect to their compositions and core/shell dimensions while varying the applied magnetic field strength. Hyperthermia properties of the prepared core-shell MFNs were further compared to commercial magnetic nanoparticles under the safe limits of magnetic field parameters (<5 × 10⁹ A/(m·s)). As a result, the highest SLP value (379.2 W/g_metal) was obtained for mag@zcf₁, with a magnetic field strength of 50 kA/m and frequency of 97 kHz. On the other hand, the lowest SLP value (1.7 W/g_metal) was obtained for cf@mag₁, with a magnetic field strength of 40 kA/m and frequency of 97 kHz. We also found that magnetic properties and thickness of the shell play critical roles in heating efficiency and hyperthermia performance. In conclusion, we successfully enhanced the SLP of MFNs by engineering their compositions and dimensions.

The cell uptake properties and hyperthermia performance of Zn0.5Fe2.5O4/SiO2 nanoparticles as magnetic hyperthermia agents

Zn0.5Fe2.5O4 nanoparticles (NPs) of 22 nm are synthesized by a one-pot approach and coated with silica for magnetic hyperthermia agents. The NPs exhibit superparamagnetic characteristics, high-specific absorption rate (SAR) (1083 wg-1, f = 430 kHz, H = 27 kAm-1), large saturation magnetization (M s = 85 emu g-1), excellent colloidal stability and low cytotoxicity. The cell uptake properties have been investigated by Prussian blue staining, transmission electron microscopy and the inductively coupled plasma-mass spectrometer, which resulted in time-dependent and concentration-dependent internalization. The internalization appeared between 0.5 and 2 h, the NPs were mainly located in the lysosomes and kept in good dispersion after incubation with human osteosarcoma MG-63 cells. Then, the relationship between cell uptake and magnetic hyperthermia performance was studied. Our results show that the hyperthermia efficiency was related to the amount of internalized NPs in the tumour cells, which was dependent on the concentration and incubation time. Interestingly, the NPs could still induce tumour cells to apoptosis/necrosis when extracellular NPs were rinsed, but the cell kill efficiency was lower than that of any rinse group, which indicated that local temperature rise was the main factor that induced tumour cells to death. Our findings suggest that this high SAR and biocompatible silica-coated Zn0.5Fe2.O4 NPs could serve as new agents for magnetic hyperthermia.

Multi-responsive albumin-lonidamine conjugated hybridized gold nanoparticle as a combined photothermal-chemotherapy for synergistic tumor ablation

Herein, we developed a multifunctional nanoplatform based on the nanoassembly of gold nanoparticles (GNP) conjugated with lonidamine (LND) and aptamer AS1411 (AS-LAGN) as an effective cancer treatment. Conjugating AS1411 aptamer on the surface of the nanoparticle significantly improved particle accumulation in cancer cells via specific affinity toward the nucleolin receptors. In vitro study clearly revealed that laser irradiation-based hyperthermia effect enhanced the chemotherapeutic effects of LND. Combinational treatment modalities revealed significant apoptosis with higher cell killing effect due to increased ROS production and inhibition of cell migration. GNP's ability to convert the excited state photon energy into thermal heat enabled synergistic photothermal/chemotherapy with improved therapeutic efficacy in animal models. Moreover, immunohistochemistry staining assays confirmed the ability of AS-LAGN to induce cellular apoptosis/necrosis and ablation in tumor tissues, without causing evident damages to the surrounding healthy tissues. Altogether, this AS-LAGN nanoplatform could be a promising strategy for mitochondria-based cancer treatment. STATEMENT OF SIGNIFICANCE: We have designed a facile biodegradable multifunctional nanocarrier system to target the mitochondria, the major "power house" of the cancer cells. We have constructed a multifunctional nanoassembly of protein coronated gold nanoparticles (GNP) conjugated with lonidamine (LND) and aptamer AS1411 (AS-LAGN) as an effective combination of phototherapy with chemotherapy for cancer treatment. The LND was conjugated with albumin which was in turn conjugated to GNP via redox-liable disulfide linkage to generate oxidative stress and ROS to kill cancer cells. GNP's ability to convert the excited state photon energy into thermal heat enabled synergistic photothermal/chemotherapy with improved therapeutic efficacy in animal models. Consistently, AS-LAGN showed enhanced antitumor efficacy in xenograft tumor model with remarkable tumor regression property.

Understanding Nanoparticle Toxicity Mechanisms To Inform Redesign Strategies To Reduce Environmental Impact

There has been a surge of consumer products that incorporate nanoparticles, which are used to improve or impart new functionalities to the products based on their unique physicochemical properties. With such an increase in products containing nanomaterials, there is a need to understand their potential impacts on the environment. This is often done using various biological models that are abundant in the different environmental compartments where the nanomaterials may end up after use. Beyond studying whether nanomaterials simply kill an organism, the molecular mechanisms by which nanoparticles exhibit toxicity have been extensively studied. Some of the main mechanisms include (1) direct nanoparticle association with an organism's cell surface, where the membrane can be damaged or initiate internal signaling pathways that damage the cell, (2) dissolution of the material, releasing toxic ions that impact the organism, generally through impairing important enzyme functions or through direct interaction with a cell's DNA, and (3) the generation of reactive oxygen species and subsequent oxidative stress on an organism, which can also damage important enzymes or an organism's genetic material. This Account reviews these toxicity mechanisms, presenting examples for each with different types of nanomaterials. Understanding the mechanism of nanoparticle toxicity will inform efforts to redesign nanoparticles with reduced environmental impact. The redesign strategies will need to be chosen based on the major mode of toxicity, but also considering what changes can be made to the nanomaterial without impacting its ability to perform in its intended application. To reduce interactions with the cell surface, nanomaterials can be designed to have a negative surface charge, use ligands such as polyethylene glycol that reduce protein binding, or have a morphology that discourages binding with a cell surface. To reduce the nanoparticle dissolution to toxic ions, the toxic species can be replaced with less toxic elements that have similar properties, the nanoparticle can be capped with a shell material, the morphology of the nanoparticle can be chosen to minimize surface area and thus minimize dissolution, or a chelating agent can be co-introduced or functionalized onto the nanomaterial's surface. To reduce the production of reactive oxygen species, the band gap of the material can be tuned either by using different elements or by doping, a shell layer can be added to inhibit direct contact with the core, or antioxidant molecules can be tethered to the nanoparticle surface. When redesigning nanoparticles, it will be important to test that the redesign strategy actually reduces toxicity to organisms from relevant environmental compartments. It is also necessary to confirm that the nanomaterial still demonstrates the critical physicochemical properties that inspired its inclusion in a product or device.

Thermal Reduction of Graphene Oxide Mitigates Its In Vivo Genotoxicity Toward Xenopus laevis Tadpoles

The worldwide increase of graphene family materials raises the question of the potential consequences resulting from their release in the environment and future consequences on ecosystem health, especially in the aquatic environment in which they are likely to accumulate. Thus, there is a need to evaluate the biological and ecological risk but also to find innovative solutions leading to the production of safer materials. This work focuses on the evaluation of functional group-safety relationships regarding to graphene oxide (GO) in vivo genotoxic potential toward X. laevis tadpoles. For this purpose, thermal treatments in H₂ atmosphere were applied to produce reduced graphene oxide (rGOs) with different surface group compositions. Analysis performed indicated that GO induced disturbances in erythrocyte cell cycle leading to accumulation of cells in G0/G1 phase. Significant genotoxicity due to oxidative stress was observed in larvae exposed to low GO concentration (0.1 mg·L⁻¹). Reduction of GO at 200 °C and 1000 °C produced a material that was no longer genotoxic at low concentrations. X-ray photoelectron spectroscopy (XPS) analysis indicated that epoxide groups may constitute a good candidate to explain the genotoxic potential of the most oxidized form of the material. Thermal reduction of GO may constitute an appropriate “safer-by-design” strategy for the development of a safer material for environment.

Cationic liposomes induce cytotoxicity in HepG2 via regulation of lipid metabolism based on whole-transcriptome sequencing analysis

Backgroud

Cationic liposomes (CLs) can be used as non-viral vectors in gene transfer and drug delivery. However, the underlying molecular mechanism of its cytotoxicity has not been well elucidated yet.

Methods

We herein report a systems biology approach based on whole-transcriptome sequencing coupled with computational method to identify the predominant genes and pathways involved in the cytotoxicity of CLs in HepG2 cell line.

Results

Firstly, we validated the concentration-dependent cytotoxicity of CLs with an IC₅₀ of 120 μg/ml in HepG2 exposed for 24 h. Subsequently, we used whole-transcriptome sequencing to identify 220 (77 up- and 143 down-regulated) differentially expressed genes (DEGs). Gene ontology (GO) and pathway analysis showed that these DEGs were mainly related to cholesterol, steroid, lipid biosynthetic and metabolic processes. Additionally, “key regulatory” genes were identified using gene act, pathway act and co-expression network analysis, and expression levels of 11 interested altered genes were confirmed by quantitative real time PCR. Interestingly, no cell cycle arrest was observed through flow cytometry.

Conclusions

These data are expected to provide deep insights into the molecular mechanism of CLs cytotoxicity.

Oxidative Stress and Inflammation Induced by Environmental and Psychological Stressors: A Biomarker Perspective

SIGNIFICANCE

The environment can elicit biological responses such as oxidative stress (OS) and inflammation as a consequence of chemical, physical, or psychological changes. As population studies are essential for establishing these environment-organism interactions, biomarkers of OS or inflammation are critical in formulating mechanistic hypotheses. Recent Advances: By using examples of stress induced by various mechanisms, we focus on the biomarkers that have been used to assess OS and inflammation in these conditions. We discuss the difference between biomarkers that are the result of a chemical reaction (such as lipid peroxides or oxidized proteins that are a result of the reaction of molecules with reactive oxygen species) and those that represent the biological response to stress, such as the transcription factor NRF2 or inflammation and inflammatory cytokines.

CRITICAL ISSUES

The high-throughput and holistic approaches to biomarker discovery used extensively in large-scale molecular epidemiological exposome are also discussed in the context of human exposure to environmental stressors.

FUTURE DIRECTIONS

We propose to consider the role of biomarkers as signs and to distinguish between signs that are just indicators of biological processes and proxies that one can interact with and modify the disease process. Antioxid. Redox Signal. 28, 852-872.

Quantification of DNA damage products by gas chromatography tandem mass spectrometry in lung cell lines and prevention effect of thyme antioxidants on oxidative induced DNA damage

Lung cancer has a high treatment cost and poor prognosis in comparison to other types of cancers. This work was involved in studying oxidative DNA base damage inhibition. Accordingly, standard carvacrol, thymol, thymoquinone with water and water-methanol extract of thyme (Origanum vulgare L. subsp. hirtum (link.) Ietswaart), thyme oil and thyme water were prepared and investigated for their efficacy to inhibit DNA oxidative damage formed by H₂O₂ in malignant lung cells (A549). The antioxidant capacity by ABTS assay was 271.73 ± 11.45 mg trolox equivalent/mL for thyme oil. HPLC analysis was carried out to determine the contents of different thyme extracts, results showing the presence of carvacrol, thymol, protocatechuic acid, caffeic acid, epicatechin and rosmarinic acid in water and water-methanol extracts while only carvacrol and thymol were found in thyme oil and thyme water. After DNA isolation from the cultured cells, the formed oxidative induced DNA damage products were analysed using GC-MS/MS. It was proven that the antioxidants in the cell culture media have succeeded to inhibit oxidative DNA base damage. Thymoquinone was shown to be the best protectant antioxidant among other antioxidants against the formation of oxidative DNA damage, whereas water-methanol extract of thyme was the best among the plant-sourced samples. Thymoquinone and thyme water-methanol extract were investigated for their efficacy on cultured healthy lung cells (BEAS-2B), and it was proven that they are efficient in protection against the oxidation of DNA of healthy lung cells too.

Multiple Method Analysis of TiO2 Nanoparticle Uptake in Rice (Oryza sativa L.) Plants

Understanding the translocation of nanoparticles (NPs) into plants is challenging because qualitative and quantitative methods are still being developed and the comparability of results among different methods is unclear. In this study, uptake of titanium dioxide NPs and larger bulk particles (BPs) in rice plant (Oryza sativa L.) tissues was evaluated using three orthogonal techniques: electron microscopy, single-particle inductively coupled plasma mass spectroscopy (spICP-MS) with two different plant digestion approaches, and total elemental analysis using ICP optical emission spectroscopy. In agreement with electron microscopy results, total elemental analysis of plants exposed to TiO₂ NPs and BPs at 5 and 50 mg/L concentrations revealed that TiO₂ NPs penetrated into the plant root and resulted in Ti accumulation in above ground tissues at a higher level compared to BPs. spICP-MS analyses revealed that the size distributions of internalized particles differed between the NPs and BPs with the NPs showing a distribution with smaller particles. Acid digestion resulted in higher particle numbers and the detection of a broader range of particle sizes than the enzymatic digestion approach, highlighting the need for development of robust plant digestion procedures for NP analysis. Overall, there was agreement among the three techniques regarding NP and BP penetration into rice plant roots and spICP-MS showed its unique contribution to provide size distribution information.

CeO2 nanoparticle fate in environmental conditions and toxicity on a freshwater predator species: a microcosm study

We studied the fate and toxicity of two types of CeO₂ NPs (bare or citrate-coated) in environmentally relevant conditions, using large indoor microcosms. Long-term exposure was carried out on a three-leveled freshwater trophic chain, comprising microbial communities as primary producers, chironomid larvae as primary consumers, and amphibian larvae as secondary consumers. Whereas coated NPs preferentially sedimented, bare NPs were mainly found in the water column. However, mass balance indicated low recovery (51.5%) for bare NPs, indicating possible NP loss, against 98.8% of recovery for coated NPs. NPs were rather chemically stable, with less than 4% of dissolution. Chironomid larvae ingested large amounts of NPs and were vectors of contamination for amphibian larvae. Although bioaccumulation in amphibian larvae was important (9.47 and 9.74 mg/kg for bare and coated NPs, respectively), no biomagnification occurred through the trophic chain. Finally, significant genotoxicity was observed in amphibian larvae, bare CeO₂ NPs being more toxic than citrate-coated NPs. ᅟ.

Biophysical characterization of functionalized titania nanoparticles and their application in dental adhesives

It is demonstrated that carboxylic acid-functionalized titanium dioxide (TiO₂) NPs produce significantly higher levels of reactive oxygen species (ROS) after visible light irradiation (400-800nm, 1600mW/cm²) in comparison to nonfunctionalized TiO₂ NPs. The level of ROS produced under these irradiation conditions was not capable of generating oxidatively induced DNA damage in a cell-free system for TiO₂ concentrations of 0.5mg/L or 5mg/L. In addition, specific incorporation of the acrylic acid-functionalized TiO₂ NPs into dental composites allowed us to utilize the generated ROS to enhance photopolymerization (curing and degree of vinyl conversion (DC)) of resin adhesives and create mechanically superior and biocompatible materials for dental applications. Incorporation of the TiO₂ NPs into selected dental composites increased the mean DC values by ≈7%. The modified TiO₂ materials and dental composite materials were extensively characterized using thermogravimetric analysis, electron microscopy, Fourier transform infrared spectroscopy, and electron paramagnetic resonance. Notably, dental adhesives incorporated with acrylic acid-functionalized TiO₂ NPs produced stronger bonds to human teeth following visible light curing in comparison to traditional dental adhesives not containing NPs with an increase in the shear bond strength of ≈29%. In addition, no leaching of the incorporated NPs was detectable from the dental adhesives after 2500 thermal cycles using inductively coupled plasma-optical emission spectroscopy, indicating that biocompatibility of the adhesives was not compromised after extensive aging. These findings suggest that NP-induced ROS may be useful to produce enhanced nanocomposite materials for selected applications in the medical device field.

STATEMENT OF SIGNIFICANCE

Titanium dioxide nanoparticles (TiO₂ NPs) have unique photocatalytic, antibacterial and UV-absorbing properties that make them beneficial additives in adhesives and composites. However, there is concern that the reactive oxygen species (ROS) produced by photoactivated TiO₂ NPs might pose toxicological risks. We demonstrate that it is possible to incorporate acid-functionalized TiO₂ NPs into dental resins which can be applied as dental adhesives to human teeth. The ROS generated by these NPs through visible-light irradiation may be utilized to increase the degree of vinyl conversion of resins, leading to adhesives that have an enhanced shear-bond strength to human teeth. Investigation into the potential genotoxicity of the NPs and their potential for release from dental composites indicated a low risk of genotoxic effects.

Titanium dioxide nanoparticles: an in vitro study of DNA binding, chromosome aberration assay, and comet assay

Engineered titanium dioxide nanoparticles (TiO2 NPs) are extensively used in cosmetic, pharmaceutical and other industries globally due to their unique properties, which has raised concern for biosafety. Genotoxicity assessment is an important part of biosafety evaluation; we report in vitro cytogenetic assays for NPs considering their unique physicochemical characteristics to fill the gap of laboratory data regarding biological safety along with mechanistic study for mode of interaction of NP with genetic material. Comet and chromosome aberration assay (CA assay) using short-term human peripheral blood cultures following exposure to TiO2 NPs; along with physicochemical parameters for stability of nano form in cultures; and DNA binding activity were carried out. The dynamic light scattering and zeta potential measurements revealed mono dispersion in media. The fluorescence spectroscopy for binding affinity of TiO2 NPs and human genomic DNA showed binding constant (Kb), 4.158 × 106 M-1 indicating strong binding affinity and negative ΔG0 value suggesting spontaneous DNA binding supporting its genotoxic potential. Following in vitro exposure to TiO2 NPs for 24 h, the cultures were analyzed for comet and CA assays, which showed significant results (p < 0.05) for % DNA intensity in tail, Olive Tail Moment and frequency of Chromosomal aberrations (CA) at 75 and 125 μM but not at 25 μM.

Biocompatibility and characterization of polyglycerol-based thermoresponsive nanogels designed as novel drug-delivery systems and their intracellular localization in keratinocytes

Novel nanogels that possess the capacity to change their physico-chemical properties in response to external stimuli are promising drug-delivery candidates for the treatment of severe skin diseases. As thermoresponsive nanogels (tNGs) are capable of enhancing penetration through biological barriers such as the stratum corneum and are taken up by keratinocytes of human skin, potential adverse consequences of their exposure must be elucidated. In this study, tNGs were synthesized from dendritic polyglycerol (dPG) and two thermoresponsive polymers. tNG_dPG_tPG are the combination of dPG with poly(glycidyl methyl ether-co-ethyl glycidyl ether) (p(GME-co-EGE)) and tNG_dPG_pNIPAM the one with poly(N-isopropylacrylamide) (pNIPAM). Both thermoresponsive nanogels are able to incorporate high amounts of dexamethasone and tacrolimus, drugs used in the treatment of severe skin diseases. Cellular uptake, intracellular localization and the toxicological properties of the tNGs were comprehensively characterized in primary normal human keratinocytes (NHK) and in spontaneously transformed aneuploid immortal keratinocyte cell line from adult human skin (HaCaT). Laser scanning confocal microscopy revealed fluorescently labeled tNGs entered into the cells and localized predominantly within lysosomal compartments. MTT assay, comet assay and carboxy-H2DCFDA assay, demonstrated neither cytotoxic or genotoxic effects, nor any induction of reactive oxygen species of the tNGs in keratinocytes. In addition, both tNGs were devoid of eye irritation potential as shown by bovine corneal opacity and permeability (BCOP) test and red blood cell (RBC) hemolysis assay. Therefore, our study provides evidence that tNGs are locally well tolerated and underlines their potential for cutaneous drug delivery.

Specific uptake mechanisms of well-tolerated thermoresponsive polyglycerol-based nanogels in antigen-presenting cells of the skin

Engineered nanogels are of high value for a targeted and controlled transport of compounds due to the ability to change their chemical properties by external stimuli. As it has been indicated that nanogels possess a high ability to penetrate the stratum corneum, it cannot be excluded that nanogels interact with dermal dendritic cells, especially in diseased skin. In this study the potential crosstalk of the thermoresponsive nanogels (tNGs) with the dendritic cells of the skin was investigated with the aim to determine the immunotoxicological properties of the nanogels. The investigated tNGs were made of dendritic polyglycerol (dPG) and poly(glycidyl methyl ether-co-ethyl glycidyl ether) (p(GME-co-EGE)), as polymer conferring thermoresponsive properties. Although the tNGs were taken up, they displayed neither cytotoxic and genotoxic effects nor any induction of reactive oxygen species in the tested cells. Interestingly, specific uptake mechanisms of the tNGs by the dendritic cells were depending on the nanogels cloud point temperature (Tcp), which determines the phase transition of the nanoparticle. The study points to caveolae-mediated endocytosis as being the major tNGs uptake mechanism at 37°C, which is above the Tcp of the tNGs. Remarkably, an additional uptake mechanism, beside caveolae-mediated endocytosis, was observed at 29°C, which is the Tcp of the tNGs. At this temperature, which is characterized by two different states of the tNGs, macropinocytosis was involved as well. In summary, our study highlights the impact of thermoresponsivity on the cellular uptake mechanisms which has to be taken into account if the tNGs are used as a drug delivery system.

Methods of Synthesis, Properties and Biomedical Applications of CuO Nanoparticles

This study aims to provide an updated survey of the main synthesis methods of copper oxide (CuO) nanoparticles in order to obtain tailored nanosystems for various biomedical applications. The synthesis approach significantly impacts the properties of such nanoparticles and these properties in turn have a significant impact on their biomedical applications. Although not widely investigated as an efficient drug delivery system, CuO nanoparticles have great biological properties including effective antimicrobial action against a wide range of pathogens and also drug resistant bacteria. These properties have led to the development of various approaches with direct applications to the biomedical field, such as tailored surfaces with antimicrobial effect, wound dressings and modified textiles. It is also believed that these nanosystems could represent efficient alternatives in the development of smart systems utilized both for the detection of pathogens and for the treatment of infections.

Enzymatic biomarkers can portray nanoCuO-induced oxidative and neuronal stress in freshwater shredders

Commercial applications of nanometal oxides have increased concern about their release into natural waters and consequent risks to aquatic biota and the processes they drive. In forest streams, the invertebrate shredder Allogamus ligonifer plays a key role in detritus food webs by transferring carbon and energy from plant litter to higher trophic levels. We assessed the response profiles of oxidative and neuronal stress enzymatic biomarkers in A. ligonifer after 96h exposure to nanoCuO at concentration ranges <LC₃₀. To better understand the contribution of ionic form in nanoCuO-induced stress, Cu²⁺ released from nanoCuO was quantified and the enzymatic responses to Cu²⁺ exposure at similar effective concentrations were compared. The highest activities of superoxide dismutase (SOD), glutathione peroxidase (GPx) and glutathione reductase (GR) were observed at concentrations <LC₅. The enzymatic activities decreased at effective concentrations between LC₁₀ and LC₃₀. GR activity remained higher than in control at all concentrations. The activity of glutathione S-transferase (GST) increased whereas that of catalase (CAT) decreased at concentrations between LC₁₀ and LC₃₀. The response patterns suggested that antioxidant enzymes could prevent oxidative stress at low concentrations (<LC₁₀) of nanoCuO, thereby contributing to the survival of A. ligonifer. At concentrations between LC₁₀ and LC₃₀, effects of nanoparticulate or released ionic copper on enzyme activities were concentration-dependent, and led to oxidative stress and even to animal death. The activity of acetylcholinesterase (AChE) was strongly inhibited even at concentrations <LC₁₀, suggesting neuronal stress in A. ligonifer.

The Comet Assay: Automated Imaging Methods for Improved Analysis and Reproducibility

Sources of variability in the comet assay include variations in the protocol used to process the cells, the microscope imaging system and the software used in the computerized analysis of the images. Here we focus on the effect of variations in the microscope imaging system and software analysis using fixed preparations of cells and a single cell processing protocol. To determine the effect of the microscope imaging and analysis on the measured percentage of damaged DNA (% DNA in tail), we used preparations of mammalian cells treated with etoposide or electrochemically induced DNA damage conditions and varied the settings of the automated microscope, camera, and commercial image analysis software. Manual image analysis revealed measurement variations in percent DNA in tail as high as 40% due to microscope focus, camera exposure time and the software image intensity threshold level. Automated image analysis reduced these variations as much as three-fold, but only within a narrow range of focus and exposure settings. The magnitude of variation, observed using both analysis methods, was highly dependent on the overall extent of DNA damage in the particular sample. Mitigating these sources of variability with optimal instrument settings facilitates an accurate evaluation of cell biological variability.

Emerging metrology for high-throughput nanomaterial genotoxicology

The rapid development of the engineered nanomaterial (ENM) manufacturing industry has accelerated the incorporation of ENMs into a wide variety of consumer products across the globe. Unintentionally or not, some of these ENMs may be introduced into the environment or come into contact with humans or other organisms resulting in unexpected biological effects. It is thus prudent to have rapid and robust analytical metrology in place that can be used to critically assess and/or predict the cytotoxicity, as well as the potential genotoxicity of these ENMs. Many of the traditional genotoxicity test methods [e.g. unscheduled DNA synthesis assay, bacterial reverse mutation (Ames) test, etc.,] for determining the DNA damaging potential of chemical and biological compounds are not suitable for the evaluation of ENMs, due to a variety of methodological issues ranging from potential assay interferences to problems centered on low sample throughput. Recently, a number of sensitive, high-throughput genotoxicity assays/platforms (CometChip assay, flow cytometry/micronucleus assay, flow cytometry/γ-H2AX assay, automated 'Fluorimetric Detection of Alkaline DNA Unwinding' (FADU) assay, ToxTracker reporter assay) have been developed, based on substantial modifications and enhancements of traditional genotoxicity assays. These new assays have been used for the rapid measurement of DNA damage (strand breaks), chromosomal damage (micronuclei) and for detecting upregulated DNA damage signalling pathways resulting from ENM exposures. In this critical review, we describe and discuss the fundamental measurement principles and measurement endpoints of these new assays, as well as the modes of operation, analytical metrics and potential interferences, as applicable to ENM exposures. An unbiased discussion of the major technical advantages and limitations of each assay for evaluating and predicting the genotoxic potential of ENMs is also provided.

Tailored dendritic core-multishell nanocarriers for efficient dermal drug delivery: A systematic top-down approach from synthesis to preclinical testing

Drug loaded dendritic core-multishell (CMS) nanocarriers are of especial interest for the treatment of skin diseases, owing to their striking dermal delivery efficiencies following topical applications. CMS nanocarriers are composed of a polyglycerol core, connected by amide-bonds to an inner alkyl shell and an outer methoxy poly(ethylene glycol) shell. Since topically applied nanocarriers are subjected to biodegradation, the application of conventional amide-based CMS nanocarriers (10-A-18-350) has been limited by the potential production of toxic polyglycerol amines. To circumvent this issue, three tailored ester-based CMS nanocarriers (10-E-12-350, 10-E-15-350, 10-E-18-350) of varying inner alkyl chain length were synthesized and comprehensively characterized in terms of particle size, drug loading, biodegradation and dermal drug delivery efficiency. Dexamethasone (DXM), a potent drug widely used for the treatment of inflammatory skin diseases, was chosen as a therapeutically relevant test compound for the present study. Ester- and amide-based CMS nanocarriers delivered DXM more efficiently into human skin than a commercially available DXM cream. Subsequent in vitro and in vivo toxicity studies identified CMS (10-E-15-350) as the most biocompatible carrier system. The anti-inflammatory potency of DXM-loaded CMS (10-E-15-350) nanocarriers was assessed in TNFα supplemented skin models, where a significant reduction of the pro-inflammatory cytokine IL-8 was seen, with markedly greater efficacy than commercial DXM cream. In summary, we report the rational design and characterization of tailored, biodegradable, ester-based CMS nanocarriers, and their subsequent stepwise screening for biocompatibility, dermal delivery efficiency and therapeutic efficacy in a top-down approach yielding the best carrier system for topical applications.

Differential genotoxicity mechanisms of silver nanoparticles and silver ions

In spite of many reports on the toxicity of silver nanoparticles (AgNPs), the mechanisms underlying the toxicity are far from clear. A key question is whether the observed toxicity comes from the silver ions (Ag⁺) released from the AgNPs or from the nanoparticles themselves. In this study, we explored the genotoxicity and the genotoxicity mechanisms of Ag⁺ and AgNPs. Human TK6 cells were treated with 5 nM AgNPs or silver nitrate (AgNO₃) to evaluate their genotoxicity and induction of oxidative stress. AgNPs and AgNO₃ induced cytotoxicity and genotoxicity in a similar range of concentrations (1.00-1.75 µg/ml) when evaluated using the micronucleus assay, and both induced oxidative stress by measuring the gene expression and reactive oxygen species in the treated cells. Addition of N-acetylcysteine (NAC, an Ag⁺ chelator) to the treatments significantly decreased genotoxicity of Ag⁺, but not AgNPs, while addition of Trolox (a free radical scavenger) to the treatment efficiently decreased the genotoxicity of both agents. In addition, the Ag⁺ released from the highest concentration of AgNPs used for the treatment was measured. Only 0.5 % of the AgNPs were ionized in the culture medium and the released silver ions were neither cytotoxic nor genotoxic at this concentration. Further analysis using electron spin resonance demonstrated that AgNPs produced hydroxyl radicals directly, while AgNO₃ did not. These results indicated that although both AgNPs and Ag⁺ can cause genotoxicity via oxidative stress, the mechanisms are different, and the nanoparticles, but not the released ions, mainly contribute to the genotoxicity of AgNPs.

Natural organic matter alters size-dependent effects of nanoCuO on the feeding behaviour of freshwater invertebrate shredders

Nanoparticle size and the presence of natural organic matter (NOM) may influence the toxicity of nanoCuO to aquatic biota, but their interactive effects have been poorly investigated. We examined the feeding behaviour of the invertebrate shredder Allogamus ligonifer when exposed to sublethal concentrations of nanoCuO (50 and 100 mg L(-1)) with three particle sizes (12, 50 and 80 nm) in the absence or presence of humic acid (HA, 100 mg L(-1)) as a proxy of NOM. We further examined the ability of invertebrates to recover from the stressors. In the absence of nanoCuO and HA, the feeding rate of shredders was 0.416 mg leaf DM mg(-1 )animal DM day(-1). The exposure to increased nanoCuO concentrations inhibited the feeding rate and effects were stronger as nanoparticle size decreased (up to 83.3% inhibition for 12 nm particles). The exposure to HA alone inhibited the feeding activity by 52.7%. However, the co-exposure to nanoCuO and HA alleviated the inhibitory effects promoted by smaller and medium sized nanoCuO (up to 29.5%). The recovery of feeding activity by the shredders after stress removal was very low; maximum recovery (16.7%) was found for invertebrates rescued from pre-exposure to lower concentration of nanoCuO with larger size.

Epigenetic mechanisms in nanomaterial-induced toxicity

With the growing advent of nanotechnology in medicine (therapeutic, diagnostic and imaging applications), cosmetics, electronics, clothing and food industries, exposure to nanomaterials (NMs) is on the rise and therefore exploring their toxic biological effects have gained great significance. In vitro and in vivo studies over the last decade have revealed that NMs have the potential to cause cytotoxicity and genotoxicity although some contradictory reports exist. However, there are only few studies which have explored the epigenetic mechanisms (changes to DNA methylation, histone modification and miRNA expression) of NM-induced toxicity, and there is a scarcity of information and many questions in this area remain unexplored and unaddressed. This review comprehensively describes the epigenetic mechanisms involved in the induction of toxicity of engineered NMs, and provides comparisons between similar effects observed upon exposure to small or nanometer-sized particles. Lastly, gaps in existing literature and scope for future studies that improve our understanding of NM-induced epigenetic toxicity are discussed.

Nanoscale copper in the soil-plant system - toxicity and underlying potential mechanisms

Nanoscale copper particles (nano-Cu) are used in many antimicrobial formulations and products for their antimicrobial activity. They may enter deliberately and/or accidentally into terrestrial environments including soils. Being the major 'eco-receptors' of nanoscale particles in the terrestrial ecosystem, soil-microbiota and plants (the soil-plant system) have been used as a model to dissect the potential impact of these particles on the environmental and human health. In the soil-plant system, the plant can be an indirect non-target organism of the soil-associated nano-Cu that may in turn affect plant-based products and their consumers. By all accounts, information pertaining to nano-Cu toxicity and the underlying potential mechanisms in the soil-plant system remains scanty, deficient and little discussed. Therefore, based on some recent reports from (bio)chemical, molecular and genetic studies of nano-Cu versus soil-plant system, this article: (i) overviews the status, chemistry and toxicity of nano-Cu in soil and plants, (ii) discusses critically the poorly understood potential mechanisms of nano-Cu toxicity and tolerance both in soil-microbiota and plants, and (iii) proposes future research directions. It appears from studies hitherto made that the uncontrolled generation and inefficient metabolism of reactive oxygen species through different reactions are the major factors underpinning the overall nano-Cu consequences in both the systems. However, it is not clear whether the nano-Cu or the ion released from it is the cause of the toxicity. We advocate to intensify the multi-approach studies focused at a complete characterization of the nano-Cu, its toxicity (during life cycles of the least-explored soil-microbiota and plants), and behavior in an environmentally relevant terrestrial exposure setting. Such studies may help to obtain a deeper insight into nano-Cu actions and address adequately the nano-Cu-associated safety concerns in the 'soil-plant system'.

Fungi from metal-polluted streams may have high ability to cope with the oxidative stress induced by copper oxide nanoparticles

Increased commercialization of products based on metal oxide nanoparticles increases the likelihood that these nanoparticles will be released into aquatic environments, thus making relevant the assessment of their potential impacts on aquatic biota. Aquatic fungi are distributed worldwide and play a key role in organic matter turnover in freshwater ecosystems. The present study investigated the impacts of copper oxide spherical nanoparticles (CuO-NPs; <50 nm powder, 5 levels ≤200 mg/L) on cellular targets and antioxidant defenses in 5 fungal isolates collected from metal-polluted or nonpolluted streams. The CuO-NPs induced oxidative stress in aquatic fungi, as evidenced by intracellular accumulation of reactive oxygen species, and led to plasma membrane damage and DNA strand breaks in a concentration-dependent manner. Effects were more pronounced with a longer exposure time (3 d vs 10 d). Under CuO-NP exposure, mycelia of fungi collected from metal-polluted streams showed less oxidative stress and higher activities of superoxide dismutase and glutathione reductase compared with fungi from nonpolluted streams. The latter fungi responded to CuO-NPs with a stronger stimulation of glutathione peroxidase activity. These findings may indicate that fungi isolated from metal-polluted streams had a greater ability to maintain the pool of reduced glutathione than those from nonpolluted streams. Overall, results suggest that populations adapted to metals may develop mechanisms to cope with the oxidative stress induced by metal nanoparticles.