Determination of endocrine-disrupting compounds in water samples by magnetic nanoparticle-assisted dispersive liquid–liquid microextraction combined with gas chromatography–tandem mass spectrometry

Ultrasonic synthesis of magnetic covalent organic frameworks and application magnetic solid phase extraction for rapid adsorption of trace bisphenols in food samples

A simple ultrasonic synthesis strategy was developed for a novel magnetic covalent organic framework. Firstly, the Fe3O4 nanoparticles were encapsulated by imine-type COF, which generated by the Schiff reaction of 4,4',4''-(1,3,5-Triazine-2,4,6-triyl)-trianiline (TAPT) and tris(4-formylphenyl)-amine (TFPA) using ultrasonic synthesis method within 2 h. The synthesised nanocomposites showed a sizeable specific surface area, and high adsorption capacity. A fast, sensitive MSPE method with Fe3O4@TAPT-TFPA-COF as adsorbent for analysing bisphenol compounds was developed. This method's advantages were simple operation, short extraction time, and avoidance of the use of centrifugal equipment. The method validation indicate that this method exhibited superior linearity, and detection limits range between 0.33 and 0.60 μg L-1. The recoveries of BPs ranged from 74.7 % to 107.0 %, with relative standard deviations of less than 3.8 % in water, milk, vinegar, and soy sauce samples. The proposed method was successfully applied for extracting BPs in food samples.

Graphene-based nanomaterials for the removal of emerging contaminants of concern from water and their potential adaptation for point-of-use applications

Considering the plethora of work on the exceptional environmental performance of 2D nanomaterials, there is still a missing link in addressing their practical application in point-of-use (POU) water treatment. By reviewing the exceptional environmental performance of 2D nanomaterials with specific emphasis on graphene and its derivatives, this review aims at inspiring further discussions and research in graphene-based POU water treatment with particular focus on the removal of emerging contaminants of concern (ECCs), which is largely missing in the literature. We outlined the prevalence of ECCs in the environment, their health effects both on humans and marine life, and the potential of efficiently removing them from water using three-dimensional graphene-based macrostructures to ensure ease of adsorbent recovery and reuse compared to nanostructures. Given various successful studies showing superior adsorption capacity of graphene nanosheets, we give an account of the recent developments in graphene-based adsorbents. Moreover, several cost-effective materials which can be easily self-assembled with nanosheets to improve their environmental performance and safety for POU water treatment purposes were highlighted. We highlighted the strategy to overcome challenges of adsorbent regeneration and contaminant degradation; and concluded by noting the need for policy makers to act decisively considering the conservative nature of the water treatment industry, and the potential health risks from ingesting ECCs through drinking water. We further justified the need for the development of advanced POU water treatment devices in the face of the growing challenges regarding ECCs in surface water, and the rising cases of drinking water advisories across the world.

Triclosan and related compounds in the environment: Recent updates on sources, fates, distribution, analytical extraction, analysis, and removal techniques

Triclosan (TCS) has been widely used in daily life because of its broad-spectrum antibacterial activities. The residue of TCS and related compounds in the environment is one of the critical environmental safety problems, and the pandemic of COVID-19 aggravates the accumulation of TCS and related compounds in the environment. Therefore, detecting TCS and related compound residues in the environment is of great significance to human health and environmental safety. The distribution of TCS and related compounds are slightly different worldwide, and the removal methods also have advantages and disadvantages. This paper summarized the research progress on the source, distribution, degradation, analytical extraction, detection, and removal techniques of TCS and related compounds in different environmental samples. The commonly used analytical extraction methods for TCS and related compounds include solid-phase extraction, liquid-liquid extraction, solid-phase microextraction, liquid-phase microextraction, and so on. The determination methods include liquid chromatography coupled with different detectors, gas chromatography and related methods, sensors, electrochemical method, capillary electrophoresis. The removal techniques in various environmental samples mainly include biodegradation, advanced oxidation, and adsorption methods. Besides, both the pros and cons of different techniques have been compared and summarized, and the development and prospect of each technique have been given.

Highly sensitive determination of endocrine disrupting chemicals in foodstuffs through magnetic solid-phase extraction followed by high-performance liquid chromatography-tandem mass spectrometry

BACKGROUND

Endocrine disrupting chemicals (EDCs), proved to be potential carcinogenic threats to human health, have received great concerns in food field. It was essential to develop effective methods to detect EDCs in food samples. The present study proposed an efficient method to determine trace EDCs including estrone (E1), 17β-estradiol (E2), estriol (E3) and bisphenol A (BPA) based on magnetic solid-phase extraction (MSPE) coupled high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) in meat samples.

RESULTS

Fe₃ O₄ @COF(TpBD)/TiO₂ nanocomposites were synthesized via functionalization of magnetic covalent organic frameworks (COFs) with titanium dioxide (TiO₂ ) nanoparticles, and used as absorbents of MSPE to enrich EDCs. The efficient EDCs enrichment relies on π-π stacking interaction, hydrogen bonding, and the interaction between titanium ions (IV, Ti⁴⁺ ) and hydroxyl groups in EDCs, which improves the selectivity and sensitivity. Under the optimized conditions, target EDCs were rapidly extracted through MSPE with 5 min. Combining Fe₃ O₄ @COF(TpBD)/TiO₂ based MSPE and HPLC-MS/MS to determine EDCs, good linearities were observed with correlation coefficient (R² ) ≥ 0.9989. The limits of detection (LODs) and limits of quantification (LOQs) were 0.13-0.41 μg kg^-1 and 0.66-1.49 μg kg^-1 , respectively. Moreover, the proposed method was successfully applied to real samples analysis.

CONCLUSIONS

The established MSPE-HPLC-MS/MS method was successfully applied to determine EDCs in meat samples with rapidness, improved selectivity and sensitivity. It shows great prospects for EDCs detection in other complicated matrices. © 2020 Society of Chemical Industry.

Chemical Fingerprint Analysis and Simultaneous Determination of Nucleosides and Amino Acids in Kang Fu Xin Liquid by High Performance Liquid Chromatography with Diode Array Detector

Background and Objective:

Kang Fu Xin liquid (KFX) is an official preparation made from the ethanol extract product from P. Americana. The present quality control method cannot control the quality of the preparation well. The aim of the present study is to establish a convenient HPLC method for multicomponents determination combined with fingerprint analysis for quality control of KFX.

Methods:

An HPLC-DAD method with gradient elution and detective wavelength switching program was developed to establish HPLC fingerprints of KFX, and 38 batches of KFX were compared and evaluated by similarity analysis (SA), hierarchical clustering analysis (HCA), and principal component analysis (PCA). Meanwhile, six nucleosides and three amino acids, including uracil, hypoxanthine, uric acid, adenosine, xanthine, inosine, tyrosine, phenylalanine and tryptophan in KFX were determined based on the HPLC fingerprints.

Results:

An HPLC method assisted with gradient elution and wavelength switching program was established and validated for multicomponents determination combined with fingerprint analysis of KFX. The results demonstrated that the similarity values of the KFX samples were more than 0.845. PCA indicated that peaks 4 (hypoxanthine), 7 (xanthine), 9 (tyrosine), 11, 13 and 17 might be the characteristic contributed components. The nine constituents in KFX, uracil, hypoxanthine, uric acid, adenosine, xanthine, inosine, tyrosine, phenylalanine and tryptophan, showed good regression (R2 > 0.9997) within test ranges and the recoveries of the method for all analytes were in the range from 96.74 to 104.24%. The limits of detections and quantifications for nine constituents in DAD were less than 0.22 and 0.43 μg•mL-1, respectively.

Conclusion:

The qualitative analysis of chemical fingerprints and the quantitative analysis of multiple indicators provide a powerful and rational way to control the KFX quality for pharmaceutical companies.

Bioaccumulation investigation of bisphenol A in HepG2 cells and zebrafishes enabled by cobalt magnetic polystyrene microsphere derived carbon based magnetic solid-phase extraction

A magnetic solid-phase extraction (MSPE) technique coupled with high performance liquid chromatography (HPLC) was developed and used for bioaccumulation investigation of bisphenol A (BPA) in HepG2 cells and zebrafishes. Cobalt magnetic polystyrene microsphere derived carbon (C-Co@PST) as an adsorbent was prepared by in situ polymerization reaction and further annealing treatment. Scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectrometry, X-ray photoelectron spectroscopy and X-ray diffraction were employed to confirm successful synthesis of C-Co@PST. A series of extraction parameters including the amount of the sorbent, the type of elute, extraction time and elution time were investigated to achieve high extraction efficiency. C-Co@PST based MSPE combined with HPLC was successfully established for bioaccumulation research of BPA in living creatures. It was found that the bioconcentration values of BPA in HepG2 cells underwent an increase, then a decrease, and finally reached an equilibrium level of 11.60 μg kg-1 at 8 h. The concentration of BPA in zebrafishes increased ranging from 6.05 μg kg-1 to 31.84 μg kg-1 over a culture time from 1 h to 12 h. Furthermore, linear and exponential models were employed to analyse the bioconcentration variation of BPA in organisms over the exposure time. Mathematical models have been developed to predict the transfer characteristics of BPA.

Application of magnetized MOF-74 to phthalate esters extraction from Chinese liquor

In this study, magnetized MOF-74 (Ni) was prepared using an ultrasound-assisted synthesis method. This novel functional magnetic adsorbent was characterized using various techniques. Using the prepared material as adsorbents, a magnetic solid-phase extraction method coupled with high-performance liquid chromatography was proposed for determining four phthalate esters in Chinese liquor samples. The extraction parameters, including solution pH, adsorbent amount, extraction time, and eluent type and volume, were optimized. Under the optimized conditions, proposed method showed good linearity within the range of 1.53-200 μg/L for diphenyl phthalate, 2.03-200 μg/L for butyl benzyl phthalate, 7.02-200 μg/L for diamyl phthalate, and 6.03-200 μg/L for dicyclohexyl phthalate, with correlation coefficients > 0.9944, low limits of detection (0.46-2.10 μg/L, S/N = 3), and good extraction repeatability (relative standard deviations of 3.7%, n = 6). This method was successfully used to analyze phthalate esters in Chinese liquor samples with recoveries of 74.4-104.8%. Two phthalate esters were detected in two samples, both at concentrations that satisfied the Chinese national standard, indicating this method has practical application prospects. The extraction efficiency of this method was also compared with conventional solid-phase extraction using commercial C₁₈ cartridges. The results demonstrated that the proposed magnetic solid-phase extraction is a simple, time-saving, efficient, and low-cost method.

Implementing a superhydrophobic substrate in immersed solvent-supported microextraction as a novel strategy for determination of organic pollutants in water samples

In this research, a new approach for extraction and determination of polycyclic aromatic hydrocarbons from sea and rain water samples was developed by implementing a superhydrophobic substrate and consuming the least amount of solvent. This version of solvent-supported microextraction enabled us to perform the procedure in the immersion mode with the slightest troubles arising from water leakage into the gas chromatography. The superhydrophobic property leads to the fixation of extracting solvent on the substrate surface during water sampling. To prepare a superhydrophobic substrate, a piece of melamine foam was coated by tannic acid and silica nanoparticles using methyltrimethoxysilane and tetramethyl orthosilicate. The morphology of the prepared foams was studied by scanning electron microscopy. The developed solvent-supported microextraction method in combination with gas chromatography-mass spectrometry was applied to the isolation and determination of some typical polycyclic aromatic hydrocarbons from aquatic media. Influential parameters such as substrate nature, extractive solvent, eluting solvent and its quantity and extraction time were investigated. The limits of detection and quantification of the method under the optimized conditions were 0.01-0.11 µg L^-1 and 0.03-1.01 µg L^-1, respectively. The relative standard deviations at the concentration level of 20 µg L^-1 were between 3% and 14% (n = 3). The linearity of calibration curves ranged from 0.03 to 60 µg L^-1. The implementation of the solvent-supported method to the analysis of real water samples was quite successful and the relative recoveries were between 88% and 107%.

An Electrochemiluminescence Sensor Based on Nafion/Magnetic Fe₃O₄ Nanocrystals Modified Electrode for the Determination of Bisphenol A in Environmental Water Samples

The well-dispersive and superparamagnetic Fe₃O₄-nanocrystals (Fe₃O₄-NCs) which could significantly enhance the anodic electrochemiluminescence (ECL) behavior of luminol, were synthesized in this study. Compared to ZnS, ZnSe, CdS and CdTe nanoparticles, the strongest anodic ECL signals were obtained at +1.6 V on the Fe₃O₄-NCs coated glassy carbon electrode. The ECL spectra revealed that the strong ECL resonance energy transfer occurred between luminol and Fe₃O₄-NCs. Furthermore, under the optimized ECL experimental conditions, such as the amount of Fe₃O₄-NCs, the concentration of luminol and the pH of supporting electrolyte, BPA exhibited a stronger distinct ECL quenching effect than its structural analogs and a highly selective and sensitive ECL sensor for the determination of bisphenol A (BPA) was developed based on the Fe₃O₄-NCs. A good linear relationship was found between the ECL intensity and the increased BPA concentration within 0.01⁻5.0 mg/L, with a correlation coefficient of 0.9972. The detection limit was 0.66 × 10^-3 mg/L. Good recoveries between 96.0% and 105.0% with a relative standard deviation of less than 4.8% were obtained in real water samples. The proposed ECL sensor can be successfully employed to BPA detection in environmental aqueous samples.

Dispersive liquid-liquid microextraction with in situ derivatization coupled with gas chromatography and mass spectrometry for the determination of 4-methylimidazole in red ginseng products containing caramel colors

A rapid analytical method was developed for the determination of 4-methylimidazole from red ginseng products containing caramel colors by using dispersive liquid-liquid microextraction with in situ derivatization followed by gas chromatography with mass spectrometry. Chloroform and acetonitrile were selected as the extraction and dispersive solvents, and based on the extraction efficiency, their optimum volumes were 200 and 100 μL, respectively. The optimum volumes of the derivatizing agent (isobutyl chloroformate) and catalyst (pyridine), pH, and concentration of NaCl in the sample solution were determined to be 25 and 100 μL, pH 7.6, and 0% w/v, respectively. Validation of the optimized method showed good linearity (R²  > 0.999), accuracy (≥89.86%), intra- (≤6.70%) and interday (≤4.17%) repeatability, limit of detection (0.96 μg/L), and limit of quantification (5.79 μg/L). The validated method was applied to quantify 4-methylimidazole in red ginseng juices and concentrates, 4-methylimidazole was only found in red ginseng juices containing caramel colorant (42.91-2863.4 μg/L) and detected in red ginseng concentrates containing >1% caramel colorant.

Magnetic extractant with an Fe3O4@SiO2 core and aqueous ammonia coating for microextraction of petroleum acids

Custom-made magnetic aqueous ammonia was prepared for rapid and selective extraction of petroleum acids.

Multi-class of endocrine disrupting compounds in aquaculture ecosystems and health impacts in exposed biota

Fishes are a major protein food source for humans, with a high economic value in the aquaculture industry. Because endocrine disrupting compounds (EDCs) have been introduced into aquatic ecosystems, the exposure of humans and animals that depend on aquatic foods, especially fishes, should be seriously considered. EDCs are emerging pollutants causing global concern because they can disrupt the endocrine system in aquatic organisms, mammals, and humans. These pollutants have been released into the environment through many sources, e.g., wastewater treatment plants, terrestrial run-off (industrial activities, pharmaceuticals, and household waste), and precipitation. The use of pharmaceuticals, pesticides, and fertilizers for maintaining and increasing fish health and growth also contributes to EDC pollution in the water body. Human and animal exposure to EDCs occurs via ingestion of contaminated matrices, especially aquatic foodstuffs. This paper aims to review human EDC exposure via fish consumption. In respect to the trace concentration of EDCs in fish, types of instrument and clean-up method are of great concerns.

Analysis of macrolide antibiotics in water by magnetic solid-phase extraction and liquid chromatography-tandem mass spectrometry

Macrolides are one of the most commonly used families of antibiotics employed in human and veterinary treatment. These compounds are considered emerging contaminants with potential ecological and human health risks that could be present in surface water. This paper describes the development and application of a simple and efficient extraction procedure for the determination of tilmicosin; erythromycin, tylosin and erythromycin-H₂O from water samples. Sample extraction was carried out using magnetic solid-phase extraction using oleate functionalized magnetic nanoparticles followed by LC-MS/MS analysis. The effects of several parameters on the extraction efficiency of MLs from water were evaluated. The recovery results obtained were >84% for most of the compounds, except for erytromycin. The LOD and LOQ values ranged from 11.5 to 26ngL^-1 and from 34 to 77ngL^-1, respectively. The selected method was applied to monitor these contaminants in water samples from different sources. Tilmicosin and tylosin were not detected in any of the samples, but erythromycin and erythromycin-H₂O were found in 50% of the surface water samples at levels from <LOQ to 264ngL^-1 and 149ngL^-1, respectively.