Rapid establishment of chemical and mechanical properties during lamellar bone formation

Mechanical properties of trabeculae and osteocyte morphology change significantly in different areas of the necrotic femoral head

Background: Osteonecrosis of the femoral head is a complex hip ailment. The precise changes in bone tissue during the disease's onset remain unclear. It is vital to assess both the quantity and quality of the trabecular state in a necrotic femoral head. Aim: This study aims to identify and compare the ultrastructural changes in osteocyte morphology and nanomechanical characteristics within various regions of necrotic femoral heads. Methods: Between December 2016 and May 2023, we gathered ten necrotic femoral heads from patients and five femoral heads from cadavers. The samples from the necrotic femoral heads were categorized into three areas: necrotic, sclerotic, and normal. Our assessment methods encompassed hematoxylin and eosin staining, sclerostin (SOST) immunohistochemistry, micro-computed tomography, nanoindentation, and acid-etched scanning electron microscopy. These techniques enabled us to examine the SOST expression, trabecular microstructure, micromechanical properties of trabeculae, and modifications in osteocyte morphology at the ultrastructural level. Results: The protein level of SOST was found to be lower in the sclerotic area. In the necrotic area, decreased values of bone volume fraction, trabecular thickness, and trabecular number and an increased value of trabecular separation were found. Conversely, in the sclerotic area, higher mean values of bone volume fraction, trabecular number, and trabecular thickness and lower trabecular separation indicated significant changes in the structural characteristics of trabeculae. Compared with the healthy area, the elastic modulus and hardness in the sclerotic area were significantly higher than those in the necrotic, normal, and control areas, while those in necrotic areas were significantly lower than those in the healthy area. The number of osteocytes tended to increase in the sclerotic area with more canalicular cells compared to the healthy area and control group. Conclusion: These results imply that the stress distribution within the sclerotic area could potentially lead to enhanced trabecular quality and quantity. This effect is also reflected in the increased count of osteocytes and their canaliculars. It is plausible that the sclerotic trabecular bone plays a pivotal role in the repair of necrotic femoral heads.

Instrumented nanoindentation in musculoskeletal research

Musculoskeletal tissues, such as bone, cartilage, and muscle, are natural composite materials that are constructed with a hierarchical structure ranging from the cell to tissue level. The component differences and structural complexity, together, require comprehensive multiscale mechanical characterization. In this review, we focus on nanoindentation testing, which is used for nanometer to sub-micrometer length scale mechanical characterization. In the following context, we will summarize studies of nanoindentation in musculoskeletal research, examine the critical factors that affect nanoindentation testing results, and briefly summarize other commonly used techniques that can be conjoined with nanoindentation for synchronized imaging and colocalized characterization.

Biodistribution and toxicity of antimicrobial ionic silver (Ag+) and silver nanoparticle (AgNP+) species after oral exposure, in Sprague-Dawley rats

Although antimicrobial nanosilver finds numerous applications in the health and food industries, the in vivo toxicity of positively charged silver nanoparticles (AgNPs⁺) and relevant controls are largely unexplored. This study investigates the relationship between the biodistribution and toxicity of the well-known cetyltrimethylammonium bromide (CTAB)-capped AgNPs⁺ in 6-weeks old female Sprague-Dawley rats, at sublethal doses. Amounts comparative to those leaked from food products or considered for animal feed were administered through daily water intake, for an 18-day period: AgNPs⁺ (40 μg mL^-1), Ag⁺ (40 μg mL^-1), antimicrobial CTAB⁺ (24 μg mL^-1) and tap water. All exposures except for the water control had adverse effects on the health and systemic functions of rats (e.g., lethargy, hepatomegaly, splenomegaly, impediment of bone development, and/or heightened immune response). Although the total Ag accumulation in tissues (1.4-1.6 μg of Ag/g of liver, spleen, jejunum, and brain) was comparable for the two Ag species, AgNPs⁺ were generally more toxic than Ag⁺, particularly in spleen (0.8 μg Ag/g). Significantly reduced euthanasia time, alopecia, inflammatory responses in spleen, fragile veins, and enhanced lymphocytosis were observed only for AgNPs⁺. Overall, this study raises health concerns about the ingestion of capped-AgNPs⁺ or Ag⁺ by first-hand consumers and industry workers.

Effect of fatigue loading and rest on impact strength of rat ulna

Stress fracture is a common injury among athletes and military personnel and is associated with fatigue-initiated damage and impact loading. The recovery of bending strength has been shown to be a function of the rest days allowed after fatigue loading in rodents and the aim of this study was to investigate if similar results would occur under impact conditions. In this study, cyclic axial compression load was applied in vivo on the right forelimbs while left forelimbs served as controls. Two rest groups were used: one day of rest and seven days of rest. Afterwards, all ulnae were scanned using micro-Computed Tomography followed by impact testing. The micro-CT scan confirmed the formation of woven bone on loaded ulnae after seven days rest. The peak impact force was 37.5% higher in the control (mean = 174.96 ± 33.25 N) specimens compared to the loaded bones (mean = 130.34 ± 22.37 N). Fourier-transformed infrared spectroscopy analyses suggested no significant change of chemical composition in the cortical region between the loaded and control ulnae, but woven bone region had lower carbonate and amide I content than contralateral controls (p < 0.05). We find that cyclic fatigue loading had a negative effect on bone's impact response. Bones that experienced fatigue loading became less stiff, weaker, and more prone to fracture when subjected to impact. The formation of woven bone after seven days of rest did not restore the stiffness upon impact and confirm that rest time is crucial to the recovery of fatigue damage.

Correlative vibrational spectroscopy and 2D X-ray diffraction to probe the mineralization of bone in phosphate-deficient mice

Bone crystallite chemistry and structure change during bone maturation. However, these properties of bone can also be affected by limited uptake of the chemical constituents of the mineral by the animal. This makes probing the effect of bone-mineralization-related diseases a complicated task. Here it is shown that the combination of vibrational spectroscopy with two-dimensional X-ray diffraction can provide unparalleled information on the changes in bone chemistry and structure associated with different bone pathologies (phosphate deficiency) and/or health conditions (pregnancy, lactation). Using a synergistic analytical approach, it was possible to trace the effect that changes in the remodelling regime have on the bone mineral chemistry and structure in normal and mineral-deficient (hypophosphatemic) mice. The results indicate that hypophosphatemic mice have increased bone remodelling, increased carbonate content and decreased crystallinity of the bone mineral, as well as increased misalignment of crystallites within the bone tissue. Pregnant and lactating mice that are normal and hypophosphatemic showed changes in the chemistry and misalignment of the apatite crystals that can be related to changes in remodelling rates associated with different calcium demand during pregnancy and lactation.

Quantitative ultrasound imaging monitoring progressive disuse osteopenia and mechanical stimulation mitigation in calcaneus region through a 90-day bed rest human study

Background

Osteoporosis parallels aging and functional mechanical unloading (e.g., space flight and bed rest), jeopardizing mineral density, microstructure, and integrity of bone and leading to an increased risk of fracture. A way to combat this deterioration is to harness the sensitivity of bone to mechanical signals.

Objective

This study evaluates the longitudinal effect of a dynamic mechanical loading through the heel on human bone in vivo during 90-day bed rest, monitored by quantitative ultrasound (QUS) imaging and dual-energy X-ray absorptiometry (DXA) in localized regions of interests, i.e., calcaneus.

Methods

A total of 29 bed rest individuals were evaluated (11 control and 18 treatment) with a brief (10-minute) daily low-intensity (0.3g), high-frequency (30Hz) dynamic mechanical stimulation countermeasure through vibrational inhibition bone erosion (VIBE). Both QUS and DXA detected longitudinal bone density and quality changes.

Results

Ultrasound velocity (UV) decreased in the control group and increased in the group treated with low-intensity loading. The UV increased by 1.9% and 1.6% at 60- and 90-day bed rest (p=0.01) in VIBE over control groups. A trend was found in broadband ultrasound attenuation (BUA), with a VIBE benefit of 1.8% at day 60 and 0.5% at day 90 in comparison with control (p=0.5). Bone mineral density (BMD) assessed by DXA decreased -4.50% for control individuals and -2.18% for VIBE individuals, showing a moderate effect of the mechanical intervention (p=0.19). Significant correlations between QUS and DXA were observed, with a combined BUA and UV vs. BMD: r²=0.70.

Conclusion

These results indicated that low-intensity, high-frequency loading has the potential to mitigate regional bone loss induced by long-term bed rest and that QUS imaging may be able to assess the subtle changes in bone alteration.

Translational potential of this article

Quantitative ultrasound has shown the efficacy of noninvasively assessing bone mass and structural properties in cadaver and isolated trabecular bone samples. While its ability in measuring in vivo bone quality and density is still unclear, a scanning confocal ultrasound imaging is developed and can perform an instant assessment for the subtle changes of such bone loss. This ultrasound imaging modality can potentially be used in the clinical assessment of bone mass. Moreover, physical stimulation has shown the ability to prevent bone loss induced by functional disuse and estrogen deficiency in animal models. However, its treatment capability is unclear. This study has shown that low-magnitude mechanical signals, introduced using low-intensity vibration (LIV), can mitigate regional bone loss caused by functional disuse. Thus localized mechanical treatment, and the quantitative ultrasound imaging have shown translational potential to noninvasively attenuate bone loss, and assess bone mass in the clinic, e.g., in an extreme condition such as long-term space mission, and long-term bedrest such as in case of spinal cord injury.

Degradation of extracellular matrices propagates calcification during development and healing in bones and teeth

BACKGROUND

Bone, dentin, and enamel are tissues formed through calcification, a process involving deposition of calcium phosphate minerals on extracellular organic matrices. Calcification, the underlying mechanism of which is unknown, is initiated with mineral deposition followed by advancing of the deposit and subsequent maturation of the mineral crystal.

HIGHLIGHT

We have reviewed the current knowledge of how calcification proceeds during bone development, bone healing, and enamel and dentin development, based on reported studies. Previous studies reported by us and by other authors have suggested that degradation of some extracellular matrix (ECM) proteins is involved in calcification during bone and dentin development and bone healing in a manner similar to that previously reported for enamel development.

CONCLUSION

The ECM proteins may inhibit mineral deposition and calcification, similar to the role of amelogenin during enamel development. The candidates for the amelogenin equivalents in bone and dentin have not been identified. Further studies are required to elucidate the regulatory mechanisms of bone and dentin calcification in light of specific ECM proteins that prevent calcification and enzymes that degrade these ECM proteins.

Vibrational spectroscopic techniques to assess bone quality

Although musculoskeletal diseases such as osteoporosis are diagnosed and treatment outcome is evaluated based mainly on routine clinical outcomes of bone mineral density (BMD) by DXA and biochemical markers, it is recognized that these two indicators, as valuable as they have proven to be in the everyday clinical practice, do not fully account for manifested bone strength. Thus, the term bone quality was introduced, to complement considerations based on bone turnover rates and BMD. Bone quality is an "umbrella" term that incorporates the structural and material/compositional characteristics of bone tissue. Vibrational spectroscopic techniques such as Fourier transform infrared microspectroscopy (FTIRM) and imaging (FTIRI), and Raman spectroscopy, are suitable analytical tools for the determination of bone quality as they provide simultaneous, quantitative, and qualitative information on all main bone tissue components (mineral, organic matrix, tissue water), in a spatially resolved manner. Moreover, the results of such analyses may be readily combined with the outcomes of other techniques such as histology/histomorphometry, small angle X-ray scattering, quantitative backscattered electron imaging, and nanoindentation.

Intrinsic material property differences in bone tissue from patients suffering low-trauma osteoporotic fractures, compared to matched non-fracturing women

Osteoporotic (low-trauma) fractures are a significant public health problem. Over 50% of women over 50yrs. of age will suffer an osteoporotic fracture in their remaining lifetimes. While current therapies reduce skeletal fracture risk by maintaining or increasing bone density, additional information is needed that includes the intrinsic material strength properties of bone tissue to help develop better treatments, since measurements of bone density account for no more than ~50% of fracture risk. The hypothesis tested here is that postmenopausal women who have sustained osteoporotic fractures have reduced bone quality, as indicated with measures of intrinsic material properties compared to those who have not fractured. Transiliac biopsies (N=120) were collected from fracturing (N=60, Cases) and non-fracturing postmenopausal women (N=60, age- and BMD-matched Controls) to measure intrinsic material properties using the nano-indentation technique. Each biopsy specimen was embedded in epoxy resin and then ground, polished and used for the nano-indentation testing. After calibration, multiple indentations were made using quasi-static (hardness, modulus) and dynamic (storage and loss moduli) testing protocols. Multiple indentations allowed the median and variance to be computed for each type of measurement for each specimen. Cases were found to have significantly lower median values for cortical hardness and indentation modulus. In addition, cases showed significantly less within-specimen variability in cortical modulus, cortical hardness, cortical storage modulus and trabecular hardness, and more within-specimen variability in trabecular loss modulus. Multivariate modeling indicated the presence of significant independent mechanical effects of cortical loss modulus, along with variability of cortical storage modulus, cortical loss modulus, and trabecular hardness. These results suggest mechanical heterogeneity of bone tissue may contribute to fracture resistance. Although the magnitudes of differences in the intrinsic properties were not overwhelming, this is the first comprehensive study to investigate, and compare the intrinsic properties of bone tissue in fracturing and non-fracturing postmenopausal women.

Diets High in Fat or Fructose Differentially Modulate Bone Health and Lipid Metabolism

Diets high in fat or carbohydrates can lead to obesity and diabetes, two interrelated conditions that have been associated with osteoporosis. Here, we contrasted the effects of a high fat (HF) versus fructose-enriched carbohydrate (CH) versus regular chow (SC) diet on bone morphology, fat content and metabolic balance in BALB/cByJ mice over a 15-week period. For 13 weeks, there were no differences in body mass between groups with small differences in the last 2 weeks. Even without the potentially confounding factor of altered body mass and levels of load bearing, HF consumption was detrimental to bone in the distal femur with lower trabecular bone volume fraction and thinner cortices than controls. These differences in bone were accompanied by twofold greater abdominal fat content and fourfold greater plasma leptin concentrations. High-fat feeding caused a decrease in de-novo lipid synthesis in the liver, kidney, white adipose and brown adipose tissue. In contrast to HF, the fructose diet did not significantly impact bone quantity or architecture. Fructose consumption also did not significantly alter leptin levels or de-novo lipid synthesis but reduced epididymal adipose tissue and increased brown adipose tissue. Cortical stiffness was lower in the CH than in HF mice. There were no differences in glucose or insulin levels between groups. Together, a diet high in fat had a negative influence on bone structure, adipose tissue deposition and lipid synthesis, changes that were largely avoided with a fructose-enriched diet.

Calcification during bone healing in a standardised rat calvarial defect assessed by micro-CT and SEM-EDX

OBJECTIVE

The study was designed to investigate the process of calcification during bone healing in a standardized rat calvarial bone defect model, measured by bone mineral density and the concentrations and distributions of calcium, phosphorus and carbon in the bone matrix.

MATERIALS AND METHODS

A standard defect was made on the parietal bone of 12-week-old rats under anaesthesia. The rats were fixed in weeks 1, 2, 4 and 8,and the calvaria were resected and examined with microcomputed tomography, then frozen and sectioned for histology and analysed with energy-dispersive X-ray spectroscopy (EDX). Parietal bone of 12-week-old control rats was processed similarly.

RESULTS

The mineral density of healing bone increased with time. The healing bone became thicker and denser with time in histology. The distributions of Ca and P expanded over the bone matrix, whereas that of C became localised and complemented that of C and P. The Ca/P concentration ratio increased, whereas the C/Ca and C/P ratios decreased in the healing bone matrix.

CONCLUSION

Healing bone is immaturely calcified initially and proceeds calcification gradually, that is, as the bone volume increases, mineral increases in density and matures in quality, while organic components decrease.

Effect of anti-sclerostin therapy and osteogenesis imperfecta on tissue-level properties in growing and adult mice while controlling for tissue age

Bone composition and biomechanics at the tissue-level are important contributors to whole bone strength. Sclerostin antibody (Scl-Ab) is a candidate anabolic therapy for the treatment of osteoporosis that increases bone formation, bone mass, and bone strength in animal studies, but its effect on bone quality at the tissue-level has received little attention. Pre-clinical studies of Scl-Ab have recently expanded to include diseases with altered collagen and material properties such as osteogenesis imperfecta (OI). The purpose of this study was to investigate the role of Scl-Ab on bone quality by determining bone material composition and tissue-level mechanical properties in normal wild type (WT) tissue, as well as mice with a typical OI Gly➔Cys mutation (Brtl/+) in type I collagen. Rapidly growing (3-week-old) and adult (6-month-old) WT and Brtl/+ mice were treated for 5weeks with Scl-Ab. Fluorescent guided tissue-level bone composition analysis (Raman spectroscopy) and biomechanical testing (nanoindentation) were performed at multiple tissue ages. Scl-Ab increased mineral to matrix in adult WT and Brtl/+ at tissue ages of 2-4wks. However, no treatment related changes were observed in mineral to matrix levels at mid-cortex, and elastic modulus was not altered by Scl-Ab at any tissue age. Increased mineral-to-matrix was phenotypically observed in adult Brtl/+ OI mice (at tissue ages>3wks) and rapidly growing Brtl/+ (at tissue ages>4wks) mice compared to WT. At identical tissue ages defined by fluorescent labels, adult mice had generally lower mineral to matrix ratios and a greater elastic modulus than rapidly growing mice, demonstrating that bone matrix quality can be influenced by animal age and tissue age alike. In summary, these data suggest that Scl-Ab alters the matrix chemistry of newly formed bone while not affecting the elastic modulus, induces similar changes between Brtl/+ and WT mice, and provides new insight into the interaction between tissue age and animal age on bone quality.

3D printed Ti6Al4V implant surface promotes bone maturation and retains a higher density of less aged osteocytes at the bone-implant interface

For load-bearing orthopaedic applications, metal implants having an interconnected pore structure exhibit the potential to facilitate bone ingrowth and the possibility for reducing the stiffness mismatch between the implant and bone, thus eliminating stress-shielding effects. 3D printed solid and macro-porous Ti6Al4V implants were evaluated after six-months healing in adult sheep femora. The ultrastructural composition of the bone-implant interface was investigated using Raman spectroscopy and electron microscopy, in a correlative manner. The mineral crystallinity and the mineral-to-matrix ratios of the interfacial tissue and the native bone were found to be similar. However, lower Ca/P ratios, lower carbonate content, but higher proline, phenylalanine and tyrosine levels indicated that the interfacial tissue remained less mature. Bone healing was more advanced at the porous implant surface (vs. the solid implant surface) based on the interfacial tissue ν1 CO3(2-)/ν2 PO4(3-) ratio, phenylalanine and tyrosine levels approaching those of the native bone. The mechanosensing infrastructure in bone, the osteocyte lacuno-canalicular network, retained ∼40% more canaliculi per osteocyte lacuna, i.e., a 'less aged' morphology at the interface. The osteocyte density per mineralised surface area was ∼36-71% higher at the interface after extended healing periods.

STATEMENT OF SIGNIFICANCE

In osseointegration research, the success of an implant surface or design is commonly determined by quantifying the amount of new bone, rather than its maturation, composition and structure. This work describes a novel correlative methodology to investigate the ultrastructure and composition of bone formed around and within 3D printed Ti6Al4V implants having an interconnected open-pore structure. Raman spectroscopy demonstrates that the molecular composition of the interfacial tissue at different implant surfaces may vary, suggesting differences in the extent to which bone maturation occurs even after long-term healing. Bone maturation corresponded well with the structural parameters associated with remodelling kinetics, for example, the osteocyte density and the average number of canaliculi per osteocyte lacuna.

3D scaffold induces efficient bone repair: in vivo studies of ultra-structural architecture at the interface

Biodegradable designer 3D scaffold bridges critical size defect and induces new bone formation as revealed by ssNMR, SEM, EDX and μ-CT in rabbit tibial model during healing. No growth factor was needed due to chemical and microstructural cues.

Individual and combined effects of noise-like whole-body vibration and parathyroid hormone treatment on bone defect repair in ovariectomized mice

The effectiveness of intermittent administration of parathyroid hormone and exposure to whole-body vibration on osteoporotic fracture healing has been previously investigated, but data on their concurrent use are lacking. Thus, we evaluated the effects of intermittent administration of parathyroid hormone, whole-body vibration, and their combination on bone repair in osteoporotic mice. Noise-like whole-body vibration with a broad frequency range was used instead of conventional sine-wave whole-body vibration at a specific frequency. Mice were ovariectomized at 9 weeks of age and subjected to drill-hole surgery in the right tibial diaphysis at 11 weeks. The animals were divided into four groups (n = 12 each): a control group, and groups treated with intermittent administration of parathyroid hormone, noise-like whole-body vibration, and both. From postoperative day 2, the groups treated with intermittent administration of parathyroid hormone and groups treated with both intermittent administration of parathyroid hormone and noise-like whole-body vibration were subcutaneously administered parathyroid hormone at a dose of 30 µg/kg/day. The groups treated with noise-like whole-body vibration and groups treated with both intermittent administration of parathyroid hormone and noise-like whole-body vibration were exposed to noise-like whole-body vibration at a root mean squared acceleration of 0.3g and frequency components of 45–100 Hz for 20 min/day. Following 18 days of interventions, the right tibiae were harvested, and the regenerated bone was analyzed by micro-computed tomography and nanoindentation testing. Compared with the control group, callus volume fraction was 40% higher in groups treated with intermittent administration of parathyroid hormone and 73% higher in groups treated with both intermittent administration of parathyroid hormone and noise-like whole-body vibration, and callus thickness was 35% wider in groups treated with both intermittent administration of parathyroid hormone and noise-like whole-body vibration. Indentation modulus was 46% higher in groups treated with noise-like whole-body vibration and 43% higher in groups treated with both intermittent administration of parathyroid hormone and noise-like whole-body vibration, and hardness was 31% higher in groups treated with both intermittent administration of parathyroid hormone and noise-like whole-body vibration compared with the control group. There was no interaction between the two treatments for both structure and mechanical indexes. The main effects of intermittent administration of parathyroid hormone and noise-like whole-body vibration on bone repair included increased bone formation and enhanced mechanical function of regenerated bone, respectively. The combined treatment resulted in further regeneration of bone with high indentation modulus and hardness, suggesting the therapeutic potential of the combined use of noise-like whole-body vibration and intermittent administration of parathyroid hormone for enhancing osteoporotic bone healing.

Multi-level femoral morphology and mechanical properties of rats of different ages

A macro-micro-nano-multi-level study was conducted to explore age-related structural and mechanical properties of bone, as well as the effects of aging on bone properties. A total of 70 male Wistar rats were used, ranging in the ages of 1, 3, 5, 7, 9, 11, 14, 15, 16, and 17 months (n = 7/age group). After micro-computed tomography (CT) scanning, longitudinal cortical bone specimens with a length of 5mm were cut along the femoral shaft axis from left femur shafts for mechanical testing, and the cross-sectional areas were measured. The macro-mechanical properties obtained in mechanical testing and microarchitecture parameters measured by micro-CT were significantly correlated with the animal age (r(2) = 0.96, p < 0.001). Scanning electron microscopy was used for detecting the microarchitecture features of the fractured surfaces, which exhibited age-related plate-fibrous-mixed fibrous-plate texture, resulting in changes in macro-mechanical properties (r(2) > 0.90, p < 0.001). The mineral phase of the left femoral shaft and head was analyzed by atomic force microscopy. Longitudinal and transverse trabecular bone tissues, as well as longitudinal cortical bone tissue, were used for nanoindentation test, and the chemical composition was evaluated by quantitative chemical analyses. The correlations between mineral content and bone material properties (i.e., elastic properties of the bone tissue and size and roughness of bone mineral grains) were highly significant (r > 0.95, p < 0.001). Multi-level femur morphology, mechanical property, and mineral content were significantly correlated with the animal age. The correlations between bone mineral content and bone material morphological and mechanical properties may partly explain the increase in bone fragility with aging, which will provide a theoretical basis for the investigation of age-related bone properties in clinics.

Modulation of bone's sensitivity to low-intensity vibrations by acceleration magnitude, vibration duration, and number of bouts

Variables defining vibration-based biomechanical treatments were tested by their ability to affect the musculoskeleton in the growing mouse. Duration of a vibration bout, but not variations in vibration intensity or number of vibration bouts per day, was identified as modulator of trabecular bone formation rates.

INTRODUCTION

Low-intensity vibrations (LIV) may enhance musculoskeletal properties, but little is known regarding the role that individual LIV variables play. We determined whether acceleration magnitude and/or the number and duration of daily loading bouts may modulate LIV efficacy.

METHODS

LIV was applied to 8-week-old mice at either 0.3 g or 0.6 g for three weeks; the number of daily bouts was one, two, or four, and the duration of a single bout was 15, 30, or 60 min. A frequency of 45 Hz was used throughout.

RESULTS

LIV induced tibial cortical surface strains in 4-month-old mice of approximately 10 με at 0.3 g and 30 με at 0.6 g. In trabecular bone of the proximal tibial metaphysis, all single daily bout signal combinations with the exception of a single 15 min daily bout at 0.3 g (i.e., single bouts of 30 and 60 min at 0.3 g and 15 and 30 min at 0.6 g) produced greater bone formation rates (BFR/BS) than in controls. Across all signal combinations, 30 and 60 min bouts were significantly more effective than 15 min bouts in raising BFR/BS above control levels. Increasing the number of daily bouts or partitioning a single daily bout into several shorter bouts did not potentiate efficacy and in some instances led to BFR/BS that was not significantly different from those in controls. Bone chemical and muscle properties were similar across all groups.

CONCLUSIONS

These data may provide a basis towards optimization of LIV efficacy and indicate that in the growing mouse skeleton, increasing bout duration from 15 to 30 or 60 min positively influences BFR/BS.

Effect of in vivo loading on bone composition varies with animal age

Loading can increase bone mass and size and this response is reduced with aging. It is unclear, however how loading affects bone mineral and matrix properties. Fourier Transform Infrared Imaging and high resolution synchrotron scanning small angle X-ray scattering were used to study how bone’s microscale and nanoscale compositional properties were altered in the tibial midshaft of young, adult, and elderly female C57Bl/6J mice after two weeks of controlled in vivo compressive loading in comparison to physiological loading. The effect of controlled loading on bone composition varied with animal age, since it predominantly influenced the bone composition of elderly mice. Interestingly, controlled loading led to enhanced collagen maturity in elderly mice. In addition, although the rate of bone formation was increased by controlled loading based on histomorphometry, the newly formed tissue had similar material quality to new bone tissue formed during physiological loading. Similar to previous studies, our data showed that bone composition was animal and tissue age dependent during physiological loading. The findings that the new tissue formed in response to controlled loading and physiological loading had similar bone composition and that controlled loading enhanced bone composition in elderly mice further supports the use of physical activity as a noninvasive treatment to enhance bone quality as well as maintain bone mass in individuals suffering from age-related bone loss.

Trabecular bone recovers from mechanical unloading primarily by restoring its mechanical function rather than its morphology

Upon returning to normal ambulatory activities, the recovery of trabecular bone lost during unloading is limited. Here, using a mouse population that displayed a large range of skeletal susceptibility to unloading and reambulation, we tested the impact of changes in trabecular bone morphology during unloading and reambulation on its simulated mechanical properties. Female adult mice from a double cross of BALB/cByJ and C3H/HeJ strains (n=352) underwent 3wk of hindlimb unloading followed by 3wk of reambulation. Normally ambulating mice served as controls (n=30). As quantified longitudinally by in vivo μCT, unloading led to an average loss of 43% of trabecular bone volume fraction (BV/TV) in the distal femur. Finite element models of the μCT tomographies showed that deterioration of the trabecular structure raised trabecular peak Von-Mises (PVM) stresses on average by 27%, indicating a significant increase in the risk of mechanical failure compared to baseline. Further, skewness of the Von-Mises stress distributions (SVM) increased by 104% with unloading, indicating that the trabecular structure became inefficient in resisting the applied load. During reambulation, bone of experimental mice recovered on average only 10% of its lost BV/TV. Even though the addition of trabecular tissue was small during reambulation, PVM and SVM as indicators of risk of mechanical failure decreased by 56% and 57%, respectively. Large individual differences in the response of trabecular bone, together with a large sample size, facilitated stratification of experimental mice based on the level of recovery. As a fraction of all mice, 66% of the population showed some degree of recovery in BV/TV while in 89% and 87% of all mice, PVM and SVM decreased during reambulation, respectively. At the end of the reambulation phase, only 8% of the population recovered half of the unloading induced losses in BV/TV while 50% and 49% of the population recovered half of the unloading induced deterioration in PVM and SVM, respectively. The association between morphological and mechanical variables was strong at baseline but progressively decreased during the unloading and reambulation cycles. The preferential recovery of trabecular micromechanical properties over bone volume fraction emphasizes that mechanical demand during reambulation does not, at least initially, seek to restore bone's morphology but its mechanical integrity.

Reduced tissue-level stiffness and mineralization in osteoporotic cancellous bone

Osteoporosis alters bone mass and composition ultimately increasing the fragility of primarily cancellous skeletal sites; however, effects of osteoporosis on tissue-level mechanical properties of cancellous bone are unknown. Dual-energy X-ray absorptiometry (DXA) scans are the clinical standard for diagnosing osteoporosis though changes in cancellous bone mass and mineralization are difficult to separate using this method. The goal of this study was to investigate possible difference in tissue-level properties with osteoporosis as defined by donor T scores. Spine segments from Caucasian female cadavers (58-92 years) were used. A T score for each donor was calculated from DXA scans to determine osteoporotic status. Tissue-level composition and mechanical properties of vertebrae adjacent to the scan region were measured using nanoindentation and Raman spectroscopy. Based on T scores, six samples were in the Osteoporotic group (58-74 years) and four samples were in the Not Osteoporotic group (65-92 years). The indentation modulus and mineral to matrix ratio (mineral:matrix) were lower in the Osteoporotic group than the Not Osteoporotic group. Mineral:matrix ratio decreased with age (r (2) = 0.35, p = 0.05), and the indentation modulus increased with areal bone mineral density (r (2) = 0.41, p = 0.04). This study is the first to examine cancellous bone composition and mechanical properties from a fracture prone location with osteoporosis. We found differences in tissue composition and mechanical properties with osteoporosis that could contribute to increased fragility in addition to changes in trabecular architecture and bone volume.

Quantitative trait loci that modulate trabecular bone's risk of failure during unloading and reloading

Genetic makeup of an individual is a strong determinant of the morphologic and mechanical properties of bone. Here, in an effort to identify quantitative trait loci (QTLs) for changes in the simulated mechanical parameters of trabecular bone during altered mechanical demand, we subjected 352 second generation female adult (16 weeks old) BALBxC3H mice to 3 weeks of hindlimb unloading followed by 3 weeks of reambulation. Longitudinal in vivo microcomputed tomography (μCT) scans tracked trabecular changes in the distal femur. Tomographies were directly translated into finite element (FE) models and subjected to a uniaxial compression test. Apparent trabecular stiffness and components of the Von Mises (VM) stress distributions were computed for the distal metaphysis and associated with QTLs. At baseline, five QTLs explained 20% of the variation in trabecular peak stresses across the mouse population. During unloading, three QTLs accounted for 14% of the variability in peak stresses. During reambulation, one QTL accounted for 5% of the variability in peak stresses. QTLs were also identified for mechanically induced changes in stiffness, median stress values and skewness of stress distributions. There was little overlap between QTLs identified for baseline and QTLs for longitudinal changes in mechanical properties, suggesting that distinct genes may be responsible for the mechanical response of trabecular bone. Unloading related QTLs were also different from reambulation related QTLs. Further, QTLs identified here for mechanical properties differed from previously identified QTLs for trabecular morphology, perhaps revealing novel gene targets for reducing fracture risk in individuals exposed to unloading and for maximizing the recovery of trabecular bone's mechanical properties during reambulation.

Bone matrix quality after sclerostin antibody treatment

Sclerostin antibody (Scl-Ab) is a novel bone-forming agent that is currently undergoing preclinical and clinical testing. Scl-Ab treatment is known to dramatically increase bone mass, but little is known about the quality of the bone formed during treatment. In the current study, global mineralization of bone matrix in rats and nonhuman primates treated with vehicle or Scl-Ab was assayed by backscattered scanning electron microscopy (bSEM) to quantify the bone mineral density distribution (BMDD). Additionally, fluorochrome labeling allowed tissue age-specific measurements to be made in the primate model with Fourier-transform infrared microspectroscopy to determine the kinetics of mineralization, carbonate substitution, crystallinity, and collagen cross-linking. Despite up to 54% increases in the bone volume after Scl-Ab treatment, the mean global mineralization of trabecular and cortical bone was unaffected in both animal models investigated. However, there were two subtle changes in the BMDD after Scl-Ab treatment in the primate trabecular bone, including an increase in the number of pixels with a low mineralization value (Z5) and a decrease in the standard deviation of the distribution. Tissue age-specific measurements in the primate model showed that Scl-Ab treatment did not affect the mineral-to-matrix ratio, crystallinity, or collagen cross-linking in the endocortical, intracortical, or trabecular compartments. Scl-Ab treatment was associated with a nonsignificant trend toward accelerated mineralization intracortically and a nearly 10% increase in carbonate substitution for tissue older than 2 weeks in the trabecular compartment (p < 0.001). These findings suggest that Scl-Ab treatment does not negatively impact bone matrix quality.

Load-induced changes in bone stiffness and cancellous and cortical bone mass following tibial compression diminish with age in female mice

The vertebrate skeleton is an adaptive structure that responds to mechanical stimuli by increasing bone mass under increased mechanical loads. Although experimental animal models have shown the anabolic cortical bone response to applied load decreases with age, no consensus exists regarding whether this adaptive mechanism is affected by age in cancellous bone, the tissue most impacted by age-related bone loss. We used an established murine in vivo tibial loading model to characterize the load-induced cancellous, cortical and whole-bone responses to mechanical stimuli in growing and mature female mice at 6, 10 and 16 weeks of age. The effects of applied load on tibial morphology and stiffness were determined using microcomputed tomography and in vivo bone strains measured at the medial tibial midshaft during applied loading. At all ages, 2 weeks of applied load produced larger midshaft cortical cross-sectional properties (+13-72%) and greater cancellous bone volume (+21-107%) and thicker trabeculae (+31-68%) in the proximal metaphyses of the loaded tibiae. The relative anabolic response decreased from 6 to 16 weeks of age in both the cancellous and cortical envelopes. Load-induced tibial stresses decreased more in 6-week-old mice following loading, which corresponded to increased in vivo tibial stiffness. Stiffness in the loaded tibiae of 16-week-old mice decreased despite moderately increased cortical cross-sectional geometry, suggesting load-induced changes in bone material properties. This study shows that the cancellous and cortical anabolic responses to mechanical stimuli decline with age into adulthood and that cortical cross-sectional geometry alone does not necessarily predict whole-bone functional stiffness.

Mathematical modeling of postmenopausal osteoporosis and its treatment by the anti-catabolic drug denosumab

Denosumab, a fully human monoclonal antibody, has been approved for the treatment of postmenopausal osteoporosis. The therapeutic effect of denosumab rests on its ability to inhibit osteoclast differentiation. Here, we present a computational approach on the basis of coupling a pharmacokinetics model of denosumab with a pharmacodynamics model for quantifying the effect of denosumab on bone remodeling. The pharmacodynamics model comprises an integrated systems biology-continuum micromechanics approach, including a bone cell population model, considering the governing biochemical factors of bone remodeling (including the action of denosumab), and a multiscale micromechanics-based bone mechanics model, for implementing the mechanobiology of bone remodeling in our model. Numerical studies of postmenopausal osteoporosis show that denosumab suppresses osteoclast differentiation, thus strongly curtailing bone resorption. Simulation results also suggest that denosumab may trigger a short-term bone volume gain, which is, however, followed by constant or decreasing bone volume. This evolution is accompanied by a dramatic decrease of the bone turnover rate by more than one order of magnitude. The latter proposes dominant occurrence of secondary mineralization (which is not anymore impeded through cellular activity), leading to higher mineral concentration per bone volume. This explains the overall higher bone mineral density observed in denosumab-related clinical studies.

Bone mineralization: from tissue to crystal in normal and pathological contexts

Bone is a complex and structured material; its mechanical behavior results from an interaction between the properties of each level of its structural hierarchy. The degree of mineralization of bone (bone density measured at tissue level) and the characteristics of the mineral deposited (apatite crystals) are major determinants of bone strength. Bone remodeling activity acts as a regulator of the degree of mineralization and of the distribution of mineral at the tissue level, directly impacting bone mechanical properties. Recent findings have highlighted the need to understand the underlying process occurring at the nanostructure level that may be independent of bone remodeling itself. A more global comprehension of bone qualities will need further works designed to characterize what are the consequences on whole bone strength of changes at nano- or microstructure levels relative to each other.

Altered composition of bone as triggered by irradiation facilitates the rapid erosion of the matrix by both cellular and physicochemical processes

Radiation rapidly undermines trabecular architecture, a destructive process which proceeds despite a devastated cell population. In addition to the 'biologically orchestrated' resorption of the matrix by osteoclasts, physicochemical processes enabled by a damaged matrix may contribute to the rapid erosion of bone quality. 8w male C57BL/6 mice exposed to 5 Gy of Cs(137) γ-irradiation were compared to age-matched control at 2d, 10d, or 8w following exposure. By 10d, irradiation had led to significant loss of trabecular bone volume fraction. Assessed by reflection-based Fourier transform infrared imaging (FTIRI), chemical composition of the irradiated matrix indicated that mineralization had diminished at 2d by -4.3±4.8%, and at 10d by -5.8±3.2%. These data suggest that irradiation facilitates the dissolution of the matrix through a change in the material itself, a conclusion supported by a 13.7±4.5% increase in the elastic modulus as measured by nanoindentation. The decline in viable cells within the marrow of irradiated mice at 2d implies that the immediate collapse of bone quality and inherent increased risk of fracture is not solely a result of an overly-active biologic process, but one fostered by alterations in the material matrix that predisposes the material to erosion.

Variations in nanomechanical properties and tissue composition within trabeculae from an ovine model of osteoporosis and treatment

Osteoporosis and treatment may affect both composition and nanomechanical properties and their spatial distributions within the individual trabeculae of cancellous bone at length scales that cannot be captured by bulk measurements. This study utilized 25 mature adult ewes divided into 5 treatment groups. Four treatment groups were given a dietary model for human high-turnover osteoporosis, and two of these were treated with antiresorptive drugs, either zoledronate (ZOL) or raloxifene (RAL), to examine their effects on bulk tissue properties and nanoscale tissue composition and mechanical properties within trabeculae. Treatment effects were most pronounced at the nanoscale, where RAL increased indentation modulus and hardness throughout trabeculae by 10% relative to the osteoporosis model. In comparison, ZOL increased these properties exclusively at the surfaces of trabeculae (indentation modulus +12%, hardness +16%). Nanomechanical alterations correlated with changes in tissue mineralization, carbonate substitution, crystallinity, and aligned collagen. Despite only minimal changes in bulk tissue tBMD, the nanomechanical improvements within trabeculae with both treatments greatly improved the predicted theoretical bending stiffness of individual trabeculae when idealized as cylindrical struts. Hence, small tissue-level alterations in critical locations for resisting trabecular failure could account for some of the discrepancy between the large reductions in fracture risk and the only modest changes in BMD with antiresorptive treatments.

Sclerostin antibody improves skeletal parameters in a Brtl/+ mouse model of osteogenesis imperfecta

Osteogenesis imperfecta (OI) is a genetic bone dysplasia characterized by osteopenia and easy susceptibility to fracture. Symptoms are most prominent during childhood. Although antiresorptive bisphosphonates have been widely used to treat pediatric OI, controlled trials show improved vertebral parameters but equivocal effects on long-bone fracture rates. New treatments for OI are needed to increase bone mass throughout the skeleton. Sclerostin antibody (Scl-Ab) therapy is potently anabolic in the skeleton by stimulating osteoblasts via the canonical wnt signaling pathway, and may be beneficial for treating OI. In this study, Scl-Ab therapy was investigated in mice heterozygous for a typical OI-causing Gly→Cys substitution in col1a1. Two weeks of Scl-Ab successfully stimulated osteoblast bone formation in a knock-in model for moderately severe OI (Brtl/+) and in WT mice, leading to improved bone mass and reduced long-bone fragility. Image-guided nanoindentation revealed no alteration in local tissue mineralization dynamics with Scl-Ab. These results contrast with previous findings of antiresorptive efficacy in OI both in mechanism and potency of effects on fragility. In conclusion, short-term Scl-Ab was successfully anabolic in osteoblasts harboring a typical OI-causing collagen mutation and represents a potential new therapy to improve bone mass and reduce fractures in pediatric OI.

Fourier transform infrared imaging as a tool to chemically and spatially characterize matrix-mineral deposition in osteoblasts

Mineralizing osteoblasts are regularly used to study osteogenesis and model in vivo bone formation. Thus, it is important to verify that the mineral and matrix being formed in situ are comparable to those found in vivo. However, it has been shown that histochemical techniques alone are not sufficient for identifying calcium phosphate-containing mineral. The goal of the present study was to demonstrate the use of Fourier transform infrared imaging (FTIRI) as a tool for characterizing the spatial distribution and colocalization of the collagen matrix and the mineral phase during the mineralization process of osteoblasts in situ. MC3T3-E1 mouse osteoblasts were mineralized in culture for 28 days and FTIRI was used to evaluate the collagen content, collagen cross-linking, mineralization level and speciation, and mineral crystallinity in a spatially resolved fashion as a function of time. To test whether FTIRI could detect subtle changes in the mineralization process, cells were treated with risedronate (RIS). Results showed that collagen deposition and mineralization progressed over time and that the apatite mineral was associated with a collagenous matrix rather than ectopic mineral. The process was temporarily slowed by RIS, where the inhibition of osteoblast function caused slowed collagen production and cross-linking, leading to decreased mineralization. This study demonstrates that FTIRI is a complementary tool to histochemistry for spatially correlating the collagen matrix distribution and the nature of the resultant mineral during the process of osteoblast mineralization. It can further be used to detect small perturbations in the osteoid and mineral deposition process.

Relationship between aortic mineral elements and osteodystrophy in mice with chronic kidney disease

In chronic kidney disease (CKD), osteodystrophy and arterial calcification often coexist. However, arterial alterations have not been addressed in CKD unaccompanied by evidence of calcification. We investigated the association of phosphate (P) and calcium (Ca) accumulation in calcification-free aortas with CKD-induced osteodystrophy. Aortic accumulation of magnesium (Mg), an inhibitor of calcification, was also examined. Male mice aged 26 weeks with CKD characterized by hyperparathyroidism and hyperphosphatemia (Nx, n = 8) and age-matched healthy male mice (shams, n = 8) were sampled for blood, and thoracic vertebrae and aortas were harvested. Bone structure and chemicals were analyzed by microcomputed tomography and infrared microspectroscopy, respectively, and aortic accumulation of P, Ca, and Mg was evaluated by plasma-atomic emission spectrometry. Volume fractions of cortical and trabecular bones were smaller in Nx than in sham animals (P < 0.05), attributed to cortical thinning and reduction in trabecular number, respectively. Bone chemicals were not different between the groups. No calcification was found in either group, but P, Ca, and Mg contents were higher in Nx than in shams (P < 0.05). The mass ratio of Ca/P was lower in Nx than in shams (P < 0.05), but that of Mg/Ca and Mg/P was not different between the groups. Aortic P and Ca contents were inversely correlated with the volume fraction of cortical bone (P < 0.05). In conclusion, the relationship of osteodystrophy with aortic P and Ca accumulation suggests the existence of a bone-vascular axis, even in calcification-free arteries in CKD. The preservation of ratios of Mg/Ca and Mg/P despite CKD development might contribute to calcification resistance.

Improved prediction of rat cortical bone mechanical behavior using composite beam theory to integrate tissue level properties

Tissue level characteristics of bone can be measured by nanoindentation and microspectroscopy, but are challenging to translate to whole bone mechanical behavior in this hierarchically structured material. The current study calculated weighted section moduli from microCT attenuation values based on tissue level relationships (Z(lin,a) and Z(lin,b)) between mineralization and material properties to predict whole bone mechanical behavior. Z(lin,a) was determined using the equation of the best fit linear regression between indentation modulus from nanoindentation and mineral:matrix ratio from Raman spectroscopy. To better represent the modulus of unmineralized tissue, a second linear regression with the intercept fixed at 0 was used to calculate Z(lin,b). The predictive capability of the weighted section moduli calculated using a tissue level relationship was compared with average tissue level properties and weighted section moduli calculated using an apparent level relationship (Z(exp)) between Young's Modulus and mineralization. A range of bone mineralization was created using vitamin D deficiency in growing rats. After 10 weeks, left femurs were scanned using microCT and tested to failure in 3 point bending. Contralateral limbs were used for co-localized tissue level mechanical properties by nanoindentation and compositional measurements by Raman microspectroscopy. Vitamin D deficiency reduced whole bone stiffness and strength by ∼35% and ∼30%, respectively, but only reduced tissue mineral density by ∼10% compared with Controls. Average tissue level properties did not correlate with whole bone mechanical behavior while Z(lin,a), Z(lin,b), and Z(exp) predicted 54%, 66%, and 80% of the failure moment respectively. This study demonstrated that in a model for varying mineralization, the composite beam model in this paper is an improved method to extrapolate tissue level data to macro-scale mechanical behavior.

Age-specific profiles of tissue-level composition and mechanical properties in murine cortical bone

There is growing evidence that bone composition and tissue-level mechanical properties are significant determinants of skeletal integrity. In the current study, Raman spectroscopy and nanoindentation testing were co-localized to analyze tissue-level compositional and mechanical properties in skeletally mature young (4 or 5 months) and old (19 months) murine femora at similar spatial scales. Standard multivariate linear regression analysis revealed age-dependent patterns in the relationships between mechanical and compositional properties at the tissue scale. However, changes in bone material properties with age are often complex and nonlinear, and can be missed with linear regression and correlation-based methods. A retrospective data mining approach was implemented using non-linear multidimensional visualization and classification to identify spectroscopic and nanoindentation metrics that best discriminated bone specimens of different age-classes. The ability to classify the specimens into the correct age group increased by using combinations of Raman and nanoindentation variables (86-96% accuracy) as compared to using individual measures (59-79% accuracy). Metrics that best classified 4 or 5 month and 19 month specimens (2-age classes) were mineral to matrix ratio, crystallinity, modulus and plasticity index. Metrics that best distinguished between 4, 5 and 19 month specimens (3-age classes) were mineral to matrix ratio, crystallinity, modulus, hardness, cross-linking, carbonate to phosphate ratio, creep displacement and creep viscosity. These findings attest to the complexity of mechanisms underlying bone tissue properties and draw attention to the importance of considering non-linear interactions between tissue-level composition and mechanics that may work together to influence material properties with age. The results demonstrate that a few non-linearly combined compositional and mechanical metrics provide better discriminatory information than a single metric or a single technique.

Effects of vitamin K on the morphometric and material properties of bone in the tibiae of growing rats

Suboptimal vitamin K nutriture is evident during rapid growth. We aimed to determine whether vitamin K(2) (menaquinone-4 [MK-4]) supplementation is beneficial to bone structure and intrinsic bone tissue properties in growing rats. Male Wistar rats (5 weeks old) were assigned to either a control diet (n = 8) or an MK-4-supplemented diet (22 mg d(-1) kg(-1) body weight, n = 8). After a 9-week feeding period, we determined the serum concentration ratio of undercarboxylated osteocalcin to γ-carboxylated osteocalcin and the urinary deoxypyridinoline level. All rats were then euthanized, and their tibiae were analyzed by micro-computed tomography for trabecular architecture and synchrotron radiation micro-computed tomography for cortical pore structure and mineralization. Fourier transform infrared microspectroscopy and a nanoindentation test were performed on the cortical midlayers of the anterior and posterior cortices to assess bone tissue properties. Neither body weight nor tibia length differed significantly between the 2 groups. Dietary MK-4 supplementation decreased the ratio of undercarboxylated osteocalcin to γ-carboxylated osteocalcin but did not affect deoxypyridinoline, indicating a positive effect on bone formation but not bone resorption. Trabecular volume fraction and thickness were increased by MK-4 (P < .05). Neither the cortical pore structure nor mineralization was affected by MK-4. On the other hand, MK-4 increased mineral crystallinity, collagen maturity, and hardness in both the anterior and posterior cortices (P < .05). These data indicate the potential benefit of MK-4 supplementation during growth in terms of enhancing bone quality.

Microstructure and nanomechanical properties in osteons relate to tissue and animal age

Material property changes in bone tissue with ageing are a crucial missing component in our ability to understand and predict age-related fracture. Cortical bone osteons contain a natural gradient in tissue age, providing an ideal location to examine these effects. This study utilized osteons from baboons aged 0-32 years (n=12 females), representing the baboon lifespan, to examine effects of tissue and animal age on mechanical properties and composition of the material. Tissue mechanical properties (indentation modulus and hardness), composition (mineral-to-matrix ratio, carbonate substitution, and crystallinity), and aligned collagen content (aligned collagen peak height ratio) were sampled along three radial lines in three osteons per sample by nanoindentation, Raman spectroscopy, and second harmonic generation microscopy, respectively. Indentation modulus, hardness, mineral-to-matrix ratio, carbonate substitution, and aligned collagen peak height ratio followed biphasic relationships with animal age, increasing sharply during rapid growth before leveling off at sexual maturity. Mineral-to-matrix ratio and carbonate substitution increased 12% and 6.7%, respectively, per year across young animals during growth, corresponding with a nearly 7% increase in stiffness and hardness. Carbonate substitution and aligned collagen peak height ratio both increased with tissue age, increasing 6-12% across the osteon radii. Indentation modulus most strongly correlated with mineral-to-matrix ratio, which explained 78% of the variation in indentation modulus. Overall, the measured compositional and mechanical parameters were the lowest in tissue of the youngest animals. These results demonstrate that composition and mechanical function are closely related and influenced by tissue and animal age.

An experimentally validated micromechanical model of a rat vertebra under compressive loading

In recent years, finite element analysis (FEA) has been increasingly applied to examine and predict the mechanical behaviour of craniofacial and other bony structures. Traditional methods used to determine material properties and validate finite element models (FEMs) have met with variable success, and can be time-consuming. An implicit assumption underlying many FE studies is that relatively high localized stress/strain magnitudes identified in FEMs are likely to predict material failure. Here we present a new approach that may offer some advantages over previous approaches. Recently developed technology now allows us to both image and conduct mechanical tests on samples in situ using a materials testing stage (MTS) fitted inside the microCT scanner. Thus, micro-finite element models can be created and validated using both quantitative and qualitative means. In this study, a rat vertebra was tested under compressive loading until failure using an MTS. MicroCT imaging of the vertebra before mechanical testing was used to create a high resolution finite element model of the vertebra. Load-displacement data recorded during the test were used to calculate the effective Young's modulus of the bone (found to be 128 MPa). The microCT image of the compressed vertebra was used to assess the predictive qualities of the FE model. The model showed the highest stress concentrations in the areas that failed during the test. Clearly, our analyses do not directly address biomechanics of the craniofacial region; however, the methodology adopted here could easily be applied to examine the properties and behaviour of specific craniofacial structures, or whole craniofacial regions of small vertebrates. Experimentally validated micro-FE analyses are a powerful method in the study of materials with complex microstructures such as bone.

In vivo tibial stiffness is maintained by whole bone morphology and cross-sectional geometry in growing female mice

Whole bone morphology, cortical geometry, and tissue material properties modulate skeletal stresses and strains that in turn influence skeletal physiology and remodeling. Understanding how bone stiffness, the relationship between applied load and tissue strain, is regulated by developmental changes in bone structure and tissue material properties is important in implementing biophysical strategies for promoting healthy bone growth and preventing bone loss. The goal of this study was to relate developmental patterns of in vivo whole bone stiffness to whole bone morphology, cross-sectional geometry, and tissue properties using a mouse axial loading model. We measured in vivo tibial stiffness in three age groups (6, 10, 16 wk old) of female C57Bl/6 mice during cyclic tibial compression. Tibial stiffness was then related to cortical geometry, longitudinal bone curvature, and tissue mineral density using microcomputed tomography (microCT). Tibial stiffness and the stresses induced by axial compression were generally maintained from 6 to 16 wks of age. Growth-related increases in cortical cross-sectional geometry and longitudinal bone curvature had counteracting effects on induced bone stresses and, therefore, maintained tibial stiffness similarly with growth. Tissue mineral density increased slightly from 6 to 16 wks of age, and although the effects of this increase on tibial stiffness were not directly measured, its role in the modulation of whole bone stiffness was likely minor over the age range examined. Thus, whole bone morphology, as characterized by longitudinal curvature, along with cortical geometry, plays an important role in modulating bone stiffness during development and should be considered when evaluating and designing in vivo loading studies and biophysical skeletal therapies.

Effects of tissue age on bone tissue material composition and nanomechanical properties in the rat cortex

Although osteoporosis is known to alter bone tissue composition, the effects of such compositional changes on tissue material properties have not yet been examined. The natural gradient in tissue mineral content arising from skeletal appositional growth provides a basic model for investigation of relationships between tissue composition and mechanical properties. The purpose of this study was to examine the effects of tissue age on bone tissue composition and nanomechanical properties. The nanomechanical properties and composition of regions of differing tissue age were characterized in the femoral cortices of growing rats using nanoindentation and Raman spectroscopy. In addition, spatial maps of the properties of periosteal tissue were examined to investigate in detail the spatial gradients in the properties of newly formed tissue. Newly formed tissue (0-4 days) was 84% less stiff and had 79% lower mineral:matrix ratio than older intracortical (15-70 days) tissue. Tissue modulus, hardness, mineral:matrix ratio, and carbonate:phosphate ratio increased sharply with distance from the periosteum and attained the properties of intracortical tissue within 4 days of formation. The mineral: matrix ratio explained 54% and 62% of the variation in tissue indentation modulus and hardness, respectively. Our data demonstrate significant variations in tissue mechanical properties with tissue age and relate mechanical properties to composition at the microscale.

Time sequence of secondary mineralization and microhardness in cortical and cancellous bone from ewes

Bone mineral is a major determinant of the mechanical resistance of bones. In bone structural units (BSUs), mineralization of osteoid tissue begins with a rapid primary mineralization followed by a secondary mineralization phase, i.e., a slow and gradual maturation of the mineral component leading to complete mineralization during an unknown period. The aim of this study was to determine the chronology of secondary bone mineralization in ewes, an animal model with a remodeling activity close to humans. Eighteen ewes received different fluorescent labels every 6 months to date the "age" of each labeled BSU. The degree of mineralization of bone (DMB) and Vickers microhardness were measured in labeled BSUs, while mineralization at the crystal level was assessed by Fourier transform infrared microspectroscopy (FTIRM). During the first 6 months of mineralization, degree of mineralization and microhardness significantly increased. They then increased more slowly until at 30 months they reach their maximal values. This progression during secondary mineralization was associated with an improvement of both the maturation and the crystal perfection of the mineral part of bone matrix. Finally, secondary mineralization in BSUs is completed after a period of 30 months. This observation should be taken into account for understanding the effects of long-term treatments of bone diseases.

Spectroscopic markers of bone quality in alendronate-treated postmenopausal women

Comparison of infrared spectroscopic images of sections from biopsies of placebo-treated post-menopausal women and women treated for 3 years with 10 mg/day alendronate demonstrated significant increases in cortical bone mineral content, no alterations in other spectroscopic markers of "bone quality," but a decrease in tissue heterogeneity.

METHODS

The material properties of thick sections from iliac crest biopsies of seven alendronate-treated women were compared to those from ten comparably aged post-menopausal women without bone disease, using infrared spectroscopic imaging at approximately 7 microm spatial resolution. Parameters evaluated were mineral/matrix ratio, crystallinity, carbonate/amide I ratio, and collagen maturity. The line widths at half maximum of the pixel histograms for each parameter were used as measures of heterogeneity.

RESULTS

The mineral content (mineral/matrix ratio) in the cortical bone of the treated women's biopsies was higher than that in the untreated control women. Crystallinity, carbonate/protein, and collagen maturity indices were not significantly altered; however, the pixel distribution was significantly narrowed for all cortical and trabecular parameters with the exception of collagen maturity in the alendronate treatment group.

CONCLUSIONS

The increases in mineral density and decreased fracture risk associated with bisphosphonate treatment may be counterbalanced by a decrease in tissue heterogeneity, which could impair tissue mechanical properties. These consistent data suggest that alendronate treatment, while increasing the bone mass, decreases the tissue heterogeneity.

The use of nanoindentation for characterizing the properties of mineralized hard tissues: state-of-the art review

The use of nanoindentation to determine nanomechanical properties of mineralized tissues has been investigated extensively. A detailed, critical, and comprehensive review of this literature is the subject of the present work. After stating the motivation for the review, a succinct presentation of the challenges, advantages, and disadvantages of the various quasi-static nanoindentation test methods (to obtain elastic modulus, E, and hardness, H) and dynamic test methods (to obtain storage and loss moduli and/or loss/damping factor) is given in the form of a primer. Explicative summaries of literature reports on various intrinsic and extrinsic factors that significantly influence E and H, followed by 15 suggested topics for future research, are included additionally. This review is designed to present a compact guide to the principles of the nanoindentation technique and to emphasize considerations when determining material properties of mineralized tissues.

Fourier transform infrared imaging microspectroscopy and tissue-level mechanical testing reveal intraspecies variation in mouse bone mineral and matrix composition

Fracture susceptibility is heritable and dependent upon bone morphology and quality. However, studies of bone quality are typically overshadowed by emphasis on bone geometry and bone mineral density. Given that differences in mineral and matrix composition exist in a variety of species, we hypothesized that genetic variation in bone quality and tissue-level mechanical properties would also exist within species. Sixteen-week-old female A/J, C57BL/6J (B6), and C3H/HeJ (C3H) inbred mouse femora were analyzed using Fourier transform infrared imaging and tissue-level mechanical testing for variation in mineral composition, mineral maturity, collagen cross-link ratio, and tissue-level mechanical properties. A/J femora had an increased mineral-to-matrix ratio compared to B6. The C3H mineral-to-matrix ratio was intermediate of A/J and B6. C3H femora had reduced acid phosphate and carbonate levels and an increased collagen cross-link ratio compared to A/J and B6. Modulus values paralleled mineral-to-matrix values, with A/J femora being the most stiff, B6 being the least stiff, and C3H having intermediate stiffness. In addition, work-to-failure varied among the strains, with the highly mineralized and brittle A/J femora performing the least amount of work-to-failure. Inbred mice are therefore able to differentially modulate the composition of their bone mineral and the maturity of their bone matrix in conjunction with tissue-level mechanical properties. These results suggest that specific combinations of bone quality and morphological traits are genetically regulated such that mechanically functional bones can be constructed in different ways.

Determination of bone's mechanical matrix properties by nanoindentation

Osteoporosis is a devastating disease that is characterized not only by a reduction in bone quantity but also by deterioration in bone quality. The quality of bone tissue is greatly influenced by its mechanical properties and, therefore, investigations into the etiology and enhanced detection of osteoporosis, or the efficacy of interventions, may require the assessment of bone's mechanical properties at the level of the tissue. Nanoindentation is a relatively new technique that is capable of evaluating bone's quasi-static and dynamic mechanical properties on extremely small volumes of tissue. These data can be used directly to describe the pre-yield properties of the matrix, but can also be combined with imaging techniques and mechanical models to extrapolate the mechanical properties from the level of the tissue to that of the organ.

Skeletal self-repair: stress fracture healing by rapid formation and densification of woven bone

Stress fractures of varying severity were created using a rat model of skeletal fatigue loading. Periosteal woven bone formed in proportion to the level of bone damage, resulting in the rapid recovery of whole bone strength independent of stress fracture severity.

INTRODUCTION

A hard periosteal callus is a hallmark of stress fracture healing. The factors that regulate the formation of this woven bone callus are poorly understood. Our objective was to produce stress fractures of varying severity and to assess the woven bone response and recovery of bone strength.

MATERIALS AND METHODS

We used the forelimb compression model to create stress fractures of varying severity in 192 adult rats. Forelimbs were loaded in fatigue until the displacement reached 30%, 45%, 65%, or 85% of fracture. The osteogenic responses of loaded and contralateral control ulnas were assessed 7 and 14 days after loading using pQCT, microCT, mechanical testing, histomorphometry, and Raman spectroscopy.

RESULTS

Loading stimulated the formation of periosteal woven bone that was maximal near the ulnar midshaft and transitioned to lamellar bone away from the midshaft. Woven bone area increased in a dose-response manner with increasing fatigue displacement. Whole bone strength was partially recovered at 7 days and fully recovered at 14 days, regardless of initial stress fracture severity. The density of the woven bone increased by 80% from 7 to 14 days, caused in part by a 30% increase in the mineral:collagen ratio of the woven bone tissue.

CONCLUSIONS

Functional healing of a stress fracture, as evidenced by recovery of whole bone strength, occurred within 2 wk, regardless of stress fracture severity. Partial recovery of strength in the first week was attributed to the rapid formation of a collar of woven bone that was localized to the site of bone damage and whose size depended on the level of initial damage. Complete recovery of strength in the second week was caused by woven bone densification. For the first time, we showed that woven bone formation occurs as a dose-dependent response after damaging mechanical loading of bone.

Raman imaging of two orthogonal planes within cortical bone

The lamellar bone's strength is mainly affected by the organization of its mineralized collagen fibers and material composition. In the present study, Raman microspectroscopic and imaging analyses were employed to study a normal human femoral midshaft bone cube-like specimen with a spatial resolution of approximately 1-2 microm. Identical bone lamellae in both longitudinal and transverse directions were analyzed, which allowed us to separate out orientation and composition dependent Raman lines, depending on the polarization directions. This approach gives information about lamellar bone orientation and variation in bone composition. It is shown that the nu1 PO4 to amide I ratio mainly displays lamellar bone orientation; and nu2 PO4 to amide III and CO3 to nu2 PO4 ratios display variation in bone composition. The nu2 PO4 to amide III ratio is higher in the interstitial bone region, whereas the CO3 to nu2 PO4 ratio has lower values in the same region. The present study provides fresh insights into the organization of a lamellar bone tissue from two orthogonal orientations.