Principles, techniques, and applications of biocatalyst immobilization for industrial application

Carbon Capture and Utilization for Sustainable Supply Chain Design of Intermediate Chemicals: The Formate Factory

Carbon capture and use technologies (CCUt) to valorize industrial flue gases into products is the key to a circular economy. Risks related to technology readiness level (TRL) and supply chain design challenges still lack clarity, however, which might hinder the widespread implementation of CCUt. Industrial decarbonization requires a holistic approach, that includes supply chain design, techno-economic analysis (TEA), and lifecycle assessment (LCA) to drive the transition toward a low-carbon future. Here, formate production with biocatalytic (BR) or electrocatalytic (ER) routes was evaluated as a potential CCU strategy for industrial decarbonization. Electrocatalysis typically had a lower production cost than biocatalysis manufacturing, while the product carbon footprint (PCF) was generally lower for biotechnology. The uncertainty analysis (UA) indicated 58% and 2% probability to reduce emissions below petrochemical emissions with the BR and ER, respectively. Strategies for facilitating the deployment of formate factories, including carbon trading schemes, creating a market for industrial flue gas, and/or producing lower-grade products, were discussed.

Immobilized enzymes: exploring its potential in food industry applications

The global demand for nutritious, longer-lasting food has spurred the food industry to seek eco-friendly solutions. Enzymes play a vital role in enhancing food quality by improving flavor, texture, and nutritional content. However, challenges like rapid deactivation and non-recoverability of free enzymes are addressed by immobilized enzymes, which enhance efficiency, quality, and sustainability in food processing. Immobilization methods include adsorption, covalent binding, entrapment, encapsulation and cross-liked enzyme aggregates, which enhancing their stability, reusability, and catalytic efficiency. Immobilization of enzyme such as pectinase, amylase, naringinase, cellulase, lactase, glucoamylase, xylanase, invertase, lipase, phytase, and protease have been utilized in fruit, vegetable, baking, dairy, brewing, and feed process due to their high thermostability, improved shelf life, food quality and safety. The catalytic efficiency of immobilized enzymes in detecting and quantifying various food components, contaminants, and quality indicators, also developed functional foods with nutraceuticals benefits, include prebiotic juices, lactose-free dairy products, poly unsaturated fatty acids rich foods, low-calorie sweeteners, fortified food and bioactive peptides.

Graphical abstract

Recent Advances in Enzymatic Biofuel Cells to Power Up Wearable and Implantable Biosensors

Enzymatic biofuel cells (EBFCs) have emerged as a transformative solution in the quest for sustainable energy, offering a biocatalyst-driven alternative for powering wearable and implantable self-powered biosensors. These systems harness renewable enzyme activity under mild conditions, positioning them as ideal candidates for next-generation biosensing applications. Despite their promise, their practical deployment is limited by challenges such as low power density, restricted operational lifespan, and miniaturization complexities. This review provides an in-depth exploration of the evolving landscape of EBFC technology, beginning with fundamental principles and the latest developments in electron transfer mechanisms. A critical assessment of enzyme immobilization techniques, including physical adsorption, covalent binding, entrapment, and cross-linking, underscores the importance of optimizing enzyme stability and catalytic activity for enhanced bioelectrode performance. Additionally, we examine advanced bioelectrode materials, focusing on the role of nanostructures such as carbon-based nanomaterials, noble metals, conducting polymers, and metal-organic frameworks in improving electron transfer and boosting biosensor efficiency. Also, this review includes case studies of EBFCs in wearable self-powered biosensors, with particular attention to the real-time monitoring of neurotransmitters, glucose, lactate, and ethanol through sweat analysis, as well as their integration into implantable devices for continuous healthcare monitoring. Moreover, a dedicated discussion on challenges and trends highlights key limitations, including durability, power management, and scalability, while presenting innovative approaches to address these barriers. By addressing both technical and biological constraints, EBFCs hold the potential to revolutionize biomedical diagnostics and environmental monitoring, paving the way for highly efficient, autonomous biosensing platforms.

Aspects of Electrochemical Biosensors Using Affinity Assays

In recent decades, the utilization of biomarkers has gained increasing attention. The timely identification and quantification of proteins, nucleic acids, and small molecules associated with a medical condition, infection, or contaminant have become increasingly crucial across a variety of fields, including medicine, food safety, and quality/environmental control. State-of-the-art biomarker detection methods predominantly rely on standard immunoassay techniques, requiring specialized laboratory equipment and trained personnel. This impedes the broad commercial implementation of biosensors in, e.g., Point-of-Care (PoC) settings where ease of operation, portability, and cost-efficiency are prioritized. Small, robust electrochemical biosensors are a promising alternative for analyzing biomarkers in complex samples within PoC environments. Therefore, creating and designing optimized sensing surfaces, immobilization strategies, and efficient signal generation are crucial for improving biosensor systems, which in turn can have real-world impact. In the present paper, we reviewed common electrode types and geometries used in electrochemical biosensors and the immobilization approaches, discussed the advantages and drawbacks of different electrochemical detection methods, and presented different labeling strategies for signal generation and enhancement.

Nano-structured polyaniline in biocatalysis: Manifesting simultaneous competence of polyaniline nanofibers and nanotubes as immobilization matrices for laccase mediated synthesis of drug intermediates

Customized nano-biocatalysts of laccase have been made using nano-structured polyaniline viz. nano-fibers and nano-tubes, as immobilization supports and a simultaneous comparison between them has been made. Laccases are poly-phenol oxidases having tremendous utility concerning wider areas of application especially in the field of organic and drug syntheses. Considering importance of laccases in drug syntheses, an effort has been made to immobilize laccase on the nano-structured polyaniline by adsorption. Immobilization was assessed using percentage enzyme loading as well as immobilization efficiency. Further immobilization process was strengthened using statistical optimization (Response Surface Methodology) for the parameters affecting immobilization viz. pH, Stirring rate, Enzyme Support ratio. In comparison to free enzyme, better thermal stability was depicted with almost 3- and 4-fold increase in half-life for immobilized laccase on nanofibers and nanotubes, respectively, at 80 °C. The storage stability of the nano-biocatalysts was revealed by the retention >50 % of higher enzyme activity in comparison to free form, when stored at 4 °C for up to 60 days. Moreover, slow and gradual decline in activity was observed when the immobilized laccase preparations were re-utilized for ten consecutive cycles of guaiacol oxidation. Greater than 60 % retention of enzyme activity after consistent catalytic cycles renders the utilization of immobilization preparations in industrial biocatalysis. Manifestation of efficient nano-biocatalysts has portrayed superior enzyme kinetics in rendering efficient biotransformations of ortho-phenylenediamine analogues to subsequent Phenazines which are known to possess therapeutic properties ranging from anti-microbial to anti-proliferative and so on.

Immobilized Nucleoside 2'-Deoxyribosyltransferases from Extremophiles for Nucleoside Biocatalysis

The synthesis of nucleosides is crucial for pharmaceutical and biotechnological applications, acting as drugs and as essential building blocks for numerous therapeutic agents. However, most enzymes employed in nucleoside biocatalysis are not recycled, possess limited stability, and have strict substrate selection for ribonucleosides or 2'deoxyribonucleosides. We employed 2'-deoxyribonucleoside transferase (NDT) enzymes from thermophilic and psychrophilic bacteria to demonstrate they can be immobilized to enhance specific activity, stability, and recyclability. NDT enzymes from Chroococcidiopsis thermalis (CtNDT), and Bacillus psychrosaccharolyticus (BpNDT) were immobilized by covalent attachment to chitosan beads. A double mutant of CtNDT, capable of generating 3'deoxyribonucleosides, showed remarkable and increased stability after immobilization compared to the same enzyme in the solution. Furthermore, we demonstrated the recyclability of immobilized biocatalysts, with a 10-fold improvement in reaction yield over 20 consecutive cycles, highlighting the practicality and sustainability of the developed immobilization method. We used our strategy to produce a pharmaceutically relevant 3'deoxyribonucleoside (2-fluoro-3'-deoxyadenosine). This highlights the importance of efficient immobilization techniques to enhance the catalytic properties of NDT enzymes, expanding their utility in biocatalysis.

Characteristic study of Candida rugosa lipase immobilized on lignocellulosic wastes: effect of support material

For the first time is reported the comparison of solid biocatalysts derived from Candida rugosa lipase (CRL) immobilized on different lignocellulosic wastes (rice husk, brewer's spent grain, hemp tea waste, green tea waste, vine bark, and spent coffee grounds) focusing on the characterization of these materials and their impact on the lipase-support interaction. The wastes were subjected to meticulous characterization by ATR-FTIR, BET, and SEM analysis, besides lignin content and hydrophobicity determination. Investigating parameters influencing immobilization performance revealed the importance of morphology, textural properties, and hydrophobic interactions revealed the importance of morphology, textural properties and especially hydrophobic interactions which resulted in positive correlations between surface hydrophobicity and lipase immobilization efficiency. Hemp tea waste and spent coffee grounds demonstrated superior immobilization performances (7.20 U/g and 8.74 U/g immobilized activity, 102.3% and 33.5% efficiency, 13.4% and 15.4% recovery, respectively). Moreover, they demonstrated good temporal stability (100% and 92% residual activity after 120 days, respectively) and retained 100% of their immobilized activity after five reuses in the hydrolysis of p-nitrophenyl palmitate in hexane. In addition, the study of enzymatic desorption caused by ionic strength and detergent treatments indicated mixed hydrophobic and electrostatic interactions in rice husk, vine bark, and spent coffee grounds supports, while hemp tea waste and green tea waste were dominated by hydrophobic interactions.

Lignin: The green powerhouse for enzyme immobilization in biocatalysis and biosensing

Enzymes play an important role in diverse industries and are critical components of many industrial products, yet, their application is limited due to their sensitivity to environmental conditions, recovery challenges, and susceptibility to inhibition. Immobilizing enzymes onto a suitable support matrix imparts higher resistance and improves operational flexibility, recyclability, and reusability. Lignin, a renewable and abundant biopolymer derived from the paper and pulp industry, has emerged as one of the prominent materials to be incorporated in support matrices. The distinctive characteristics of lignin include high mechanical strength, ease of separation, chemical stability, robust matrix for securing enzyme binding, biocompatibility, and ease of surface functionalization, making it a promising alternative to traditional synthetic materials. Research studies suggest the effectiveness of various lignin-based materials for immobilizing enzymes and significantly improving their stability, reusability, and catalytic activity. This article critically examines the unique properties of lignin and highlights significant contributions made in the development of enzyme immobilization for biocatalysis and biosensing applications. Additionally, the roles of hybrid materials, multienzyme immobilization, and innovative strategies like interfacial activation and enzyme shielding are discussed for overcoming the current challenges and developing sustainable, efficient, and robust biocatalytic and biosensing processes for industrial applications.

A novel Affi-Cova magnetic nanoparticles for one-step covalent immobilization of His-tagged enzyme directly from crude cell lysate

Owing to the rapid advancement of in vitro synthetic biology, functional carriers capable of covalently binding target proteins from crude lysates under mild conditions have garnered escalating attention. Herein, a magnetic nanoparticle with affinity/covalent bifunction (MNP@Affi-Cova) was developed for the direct covalent immobilization of the recombinant enzyme of His-tagged birA (r-birA) from crude cell lysates in a single step. This innovative approach is attributed to the presence of chelated Ni2+ ions and epoxy groups on the surface of the beads. The fabricated magnetic nanoparticles were characterized by SEM, FT-IR spectrum, and zeta potential. The application conditions and stability of the MNP@Affi-Cova beads were systematically evaluated. Notably, the MNP@Affi-Cova beads exhibited a covalent capture efficiency of 91.25 μg r-birA/mg beads from a cell lysate supernatant containing 2.62 mg/mL crude protein. The immobilized r-birA exhibited significantly enhanced pH and thermal stability compared to the free counterpart. Additionally, the reusability of the immobilized r-birA on MNP@Affi-Cova demonstrated the retention of 76.1 % of its initial activity over ten cycles. These results suggest that the MNP@Affi-Cova presents considerable potential as a support for the covalent immobilization of recombinant His-tagged enzymes directly from crude lysates, thereby circumventing the labor-intensive purification process typically required before enzyme immobilization.

Size-dependent ability of AtaA to immobilize cells in Acinetobacter sp. Tol 5

Microbial cells serve as efficient and environmentally friendly biocatalysts, but their stability and reusability in practical applications must often be improved through immobilization. Acinetobacter sp. Tol 5 shows high adhesiveness to materials due to its large cell surface protein AtaA, which consists of 3630 amino acids (aa). Previously, we developed a method for immobilizing bacteria using AtaA. Herein, we investigated the cell immobilization ability of in-frame deletion (IFD) mutants of AtaA with different sizes in Tol 5. Mini-AtaA, which consists of 775 aa and is functional in Escherichia coli, was produced and present on the cell surface; however, mini-AtaA showed no immobilization ability in Tol 5. A cell immobilization assay was performed with cells expressing 16 IFD mutants of AtaA with different sizes, revealing that a length of at least 1417 aa was required for the sufficient immobilization of Tol 5 cells; thus, the minimum length needed to achieve the adhesive function of AtaA varies among bacterial species. The constructed mutant library of AtaA ranging from 3630 to 775 aa will allow researchers to quickly and easily explore the optimal size of AtaA, even for bacteria newly introduced to AtaA.

Distal mutations enhance efficiency of free and immobilized NOV1 dioxygenase for vanillin synthesis

Protein engineering is crucial to improve enzymes' efficiency and robustness for industrial biocatalysis. NOV1 is a bacterial dioxygenase that holds biotechnological potential by catalyzing the one-step oxidation of the lignin-derived isoeugenol into vanillin, a popular flavoring agent used in food, cleaning products, cosmetics and pharmaceuticals. This study aims to enhance NOV1 activity and operational stability through the identification of distal hotspots, located at more than 9 Å from the active site using Zymspot, a tool that predicts advantageous distant mutations, streamlining protein engineering. A total of 41 variants were constructed using site-directed mutagenesis and the six most active enzyme variants were then recombined. Two variants, with two and three mutations, showed nearly a 10-fold increase in activity and up to 40-fold higher operational stability than the wild-type. Furthermore, these variants show 90-100 % immobilization efficiency in metal affinity resins, compared to approximately 60 % for the wild-type. In bioconversions where 50 mM of isoeugenol was added stepwise over 24-h cycles, the 1D2 variant produced approximately 144 mM of vanillin after six reaction cycles, corresponding to around 22 mg, indicating a 35 % molar conversion yield. This output was around 2.5 times higher than that obtained using the wild-type. Our findings highlight the efficacy of distal protein engineering in enhancing enzyme functions like activity, stability, and metal binding selectivity, thereby fulfilling the criteria for industrial biocatalysts. This study provides a novel approach to enzyme optimization that could have significant implications for various biotechnological applications.

Support Enzyme Loading Influences the Effect of Aldehyde Dextran Modification on the Specificity of Immobilized Ficin for Large Proteins

It has been reported that the modification of immobilized glyoxyl-ficin with aldehyde dextran can promote steric hindrances that greatly reduce the activity of the immobilized protease against hemoglobin, while the protease still maintained a reasonable level of activity against casein. In this paper, we studied if this effect may be different depending on the amount of ficin loaded on the support. For this purpose, both the moderately loaded and the overloaded glyoxyl-ficin biocatalysts were prepared and modified with aldehyde dextran. While the moderately loaded biocatalyst had a significantly reduced activity, mainly against hemoglobin, the activity of the overloaded biocatalyst was almost maintained. This suggests that aldehyde dextran was able to modify areas of the moderately loaded enzyme that were not available when the enzyme was overloaded. This modification promoted a significant increase in biocatalyst stability for both biocatalysts, but the stability was higher for the overloaded biocatalyst (perhaps due to a combination of inter- and intramolecular crosslinking).

Protocell Flow Reactors for Enzyme and Whole-Cell Mediated Biocatalysis

The design and construction of continuous flow biochemical reactors comprising immobilized biocatalysts have generated great interest in the efficient synthesis of value-added chemicals. Living cells use compartmentalization and reaction-diffusion processes for spatiotemporal regulation of biocatalytic reactions, and implementing these strategies into continuous flow reactors can offer new opportunities in reactor design and application. Herein, the fabrication of protocell-based continuous flow reactors for enzyme and whole-cell mediated biocatalysis is demonstrated. Semipermeable membranized coacervate vesicles are employed as model protocells that spontaneously sequester enzymes or accumulate living bacteria to produce embodied microreactors capable of single- or multiple-step catalytic reactions. By packing millions of the enzyme/bacteria-containing coacervate vesicles in a glass column, a facile, cost-effective, and modular methodology capable of performing oxidoreductase, peroxidase and lipolytic reactions, enzyme-mediated L-DOPA synthesis, and whole-cell glycolysis under continuous flow conditions, is demonstrated. It is shown that the protocell-nested enzymes and bacterial cells exhibit enhanced activities and stability under deleterious operating conditions compared with their non-encapsulated counterparts. These results provide a step toward the engineering of continuous flow reactors based on cell-like microscale agents and offer opportunities in the development of green and sustainable industrial bioprocessing.

Recent trends in targeted delivery of smart nanocarrier-based microbial enzymes for therapeutic applications

Smart carrier-based immobilization has widened the use of enzymes for the treatment of several disorders. Large surface areas, tunable morphology, and surface modification ability aid the targeted and controlled release of therapeutic enzymes from such formulations. Smart nanocarriers, such as polymeric carriers, liposomes, and silica have also increased the stability, half-life, and permeability of these enzymes. In this review, summarize recent advances in the smart immobilization of microbial enzymes and their development as precision nanomedicine for the treatment of cancer, thrombosis, phenylketonuria (PKU), and wound healing. We also discuss the challenges and measures to be adopted for the successful clinical translation of these formulations.

Implementation of an ultra-sensitive microwell-based electrochemical sensor for the detection of Alzheimer's disease

Alzheimer's Disease (AD) is one of the most common neurodegenerative disorders in elderly people. It is diagnosed by detecting amyloid beta (Aβ) protein in cerebrospinal fluid (CSF) obtained by lumbar puncture or through expensive positron emission tomography (PET) imaging. Although blood-based diagnosis of AD offers a less invasive and cost-effective alternative, the quantification of Aβ is technically challenging due to its low abundance in peripheral blood. To address this, we developed a compact yet highly sensitive microwell-based electrochemical sensor with a densely packed microelectrode array (20 by 20) for enhancing sensitivity. Employing microwells on the working and counter electrodes minimized the leakage current from the metallic conductors into the assay medium, refining the signal fidelity. We achieved a detection limit <10 fg/mL for Aβ by elevating the signal-to-noise ratio, thus capable of AD biomarker quantification. Moreover, the microwell structure maintained the performance irrespective of variations in bead number, indicative of the sensor's robustness. The sensor's efficacy was validated through the analysis of Aβ concentrations in plasma samples from 96 subjects, revealing a significant distinction between AD patients and healthy controls with an area under the receiver operating characteristic curve (AUC) of 0.85. Consequently, our novel microwell-based electrochemical biosensor represents a highly sensitive platform for detecting scant blood-based biomarkers, including Aβ, offering substantial potential for advancing AD diagnostics.

Adhesion preference of the sticky bacterium Acinetobacter sp. Tol 5

Gram-negative bacterium Acinetobacter sp. Tol 5 exhibits high adhesiveness to various surfaces of general materials, from hydrophobic plastics to hydrophilic glass and metals, via AtaA, an Acinetobacter trimeric autotransporter adhesin Although the adhesion of Tol 5 is nonspecific, Tol 5 cells may have prefer materials for adhesion. Here, we examined the adhesion of Tol 5 and other bacteria expressing different TAAs to various materials, including antiadhesive surfaces. The results highlighted the stickiness of Tol 5 through the action of AtaA, which enabled Tol 5 cells to adhere even to antiadhesive materials, including polytetrafluoroethylene with a low surface free energy, a hydrophilic polymer brush with steric hindrance, and mica with an ultrasmooth surface. Single-cell force spectroscopy as an atomic force microscopy technique revealed the strong cell adhesion force of Tol 5 to these antiadhesive materials. Nevertheless, Tol 5 cells showed a weak adhesion force toward a zwitterionic 2-methacryloyloxyethyl-phosphorylcholine (MPC) polymer-coated surface. Dynamic flow chamber experiments revealed that Tol 5 cells, once attached to the MPC polymer-coated surface, were exfoliated by weak shear stress. The underlying adhesive mechanism was presumed to involve exchangeable, weakly bound water molecules. Our results will contribute to the understanding and control of cell adhesion of Tol 5 for immobilized bioprocess applications and other TAA-expressing pathogenic bacteria of medical importance.

Unravelling the Mechanism of Elastin-like Polypeptide-Enzyme Fusion Stabilization in Organic Solvents

Elastin-like polypeptides (ELP) are a class of materials that are widely used as purification tags and in potential therapeutic applications. We have used the hydrophobic nature of ELP to extract them into organic solvents and precipitate them to obtain highly pure materials. Although many different types of ELP have been rapidly purified in this manner, the underlying mechanism for this process and its ability to retain functional proteins within organic phase-rich media has been unclear. A cleavable ELP-Intein construct fused with the enzyme chorismate mutase (ELP-I-Cm2) was used to better understand the organic solvent extraction process for ELP and the factors impacting the retention of enzyme activity. Our extraction studies indicated that a cell lysis step was essential to stabilize the ELP-I-Cm2 in the organic phase, prevent intein cleavage, and extract the fusion protein with high efficiency and retained activity. Circular dichroism and infrared spectroscopic characterization of ELP-I-Cm2 in organic solvents and aqueous solutions of the extracted and precipitated material indicated that the ELP secondary structure was retained in both environments. Atomic force microscopy and negative stain transmission electron microscopy imaging of ELP-I-Cm2 in organic solvents revealed highly regular circular features that were ∼50 nm in diameter, in contrast to larger (>100 nm) irregular features found in aqueous solutions. Since reverse micelles have often been used in catalytic processes, we evaluated the enzymatic activity of the ELP-I-Cm2 reversed micelles in different organic solvent mixtures and found that Cm2-mediated reactions in organic media were of comparable rate and efficiency to those in aqueous media. Based on these findings, we report an exciting new opportunity for ELP-enzyme fusion applications by exploiting their ability to form catalytically active reverse micelles in organic media.

IIFS: An improved incremental feature selection method for protein sequence processing

MOTIVATION

Discrete features can be obtained from protein sequences using a feature extraction method. These features are the basis of downstream processing of protein data, but it is necessary to screen and select some important features from them as they generally have data redundancy.

RESULT

Here, we report IIFS, an improved incremental feature selection method that exploits a new subset search strategy to find the optimal feature set. IIFS combines nonadjacent sorting features to prevent the drawbacks of data explosion and excessive reliance on feature sorting results. The comparative experimental results on 27 feature sorting data show that IIFS can find more accurate and important features compared to existing methods.The IIFS approach also handles data redundancy more efficiently and finds more representative and discriminatory features while ensuring minimal feature dimensionality and good evaluation metrics. Moreover, we wrap this method and deploy it on a web server for access at http://112.124.26.17:8005/.

Construction and application of highly efficient waste cooking oil degrading bacteria consortium in oily wastewater

The treatment of cooking oil wastewater is an urgent issue need to be solved. We aimed to screen for efficient oil-degrading bacteria and develop a new microbial agent for degrading waste cooking oil in oily wastewater. Three extremely effective oil-degrading bacteria, known as YZQ-1, YZQ-3, and YZQ-4, were found by the enrichment and acclimation of samples from various sources and separation using oil degradation plates. The 16S rRNA sequencing analysis and phylogenetic tree construction showed that the three strains were Bacillus tropicus, Pseudomonas multiresinivorans, and Raoultella terrigena. Under optimal degradation conditions, the maximal degradation rates were 67.30 ± 3.69%, 89.65 ± 1.08%, and 79.60 ± 5.30%, respectively, for YZQ-1, YZQ-3, and YZQ-4. Lipase activity was highest for YZQ-3, reaching 94.82 ± 12.89 U/L. The best bacterial alliance was obtained by adding equal numbers of microbial cells from the three strains. Moreover, when this bacterial alliance was applied to oily wastewater, the degradation rate of waste cooking oil was 61.13 ± 7.30% (3.67% ± 2.13% in the control group), and COD removal was 62.4% ± 5.65% (55.60% ± 0.71% in the control group) in 72 h. Microbial community analysis results showed YZQ-1 and YZQ-3 were adaptable to wastewater and could coexist with local bacteria, whereas YZQ-4 could not survive in wastewater. Therefore, the combination of YZQ-1 and YZQ-3 can efficiently degrade oil and shows great potential for oily wastewater treatment.

A Commercial Clay-Based Material as a Carrier for Targeted Lysozyme Delivery in Animal Feed

The controlled supply of bioactive molecules is a subject of debate in animal nutrition. The release of bioactive molecules in the target organ, in this case the intestine, results in improved feed, as well as having a lower environmental impact. However, the degradation of bioactive molecules' in transit in the gastrointestinal passage is still an unresolved issue. This paper discusses the feasibility of a simple and cost-effective procedure to bypass the degradation problem. A solid/liquid adsorption procedure was applied, and the operating parameters (pH, reaction time, and LY initial concentration) were studied. Lysozyme is used in this work as a representative bioactive molecule, while Adsorbo®, a commercial mixture of clay minerals and zeolites which meets current feed regulations, is used as the carrier. A maximum LY loading of 32 mgLY/gAD (LY(32)-AD) was obtained, with fixing pH in the range 7.5-8, initial LY content at 37.5 mgLY/gAD, and reaction time at 30 min. A full characterisation of the hybrid organoclay highlighted that LY molecules were homogeneously spread on the carrier's surface, where the LY-carrier interaction was mainly due to charge interaction. Preliminary release tests performed on the LY(32)-AD synthesised sample showed a higher releasing capacity, raising the pH from 3 to 7. In addition, a preliminary Trolox equivalent antioxidant capacity (TEAC) assay showed an antioxidant capacity for the LY of 1.47 ± 0.18 µmol TroloxEq/g with an inhibition percentage of 33.20 ± 3.94%.

Performance of cross-linked enzyme crystals of engineered halohydrin dehalogenase HheG in different chemical reactor systems

Halohydrin dehalogenase HheG is an industrially interesting biocatalyst for the preparation of different β-substituted alcohols starting from bulky internal epoxides. We previously demonstrated that the immobilization of different HheG variants in the form of cross-linked enzyme crystals (CLECs) yielded stable and reusable enzyme immobilizes with increased resistance regarding temperature, pH, and the presence of organic solvents. Now, to further establish their preparative applicability, HheG D114C CLECs cross-linked with bis-maleimidoethane have been successfully produced on a larger scale using a stirred crystallization approach, and their application in different chemical reactor types (stirred tank reactor, fluidized bed reactor, and packed bed reactor) was systematically studied and compared for the ring opening of cyclohexene oxide with azide. This revealed the highest obtained space-time yield of 23.9 kgproduct  gCLEC -1  h-1  Lreactor volume -1 along with the highest achieved product enantiomeric excess [64%] for application in a packed-bed reactor. Additionally, lyophilization of those CLECs yielded a storage-stable HheG preparation that still retained 67% of initial activity (after lyophilization) after 6 months of storage at room temperature.

"3-in-1" Hybrid Biocatalysts: Association of Yeast Cells Immobilized in a Sol-Gel Matrix for Determining Sewage Pollution

This study presents a novel ″3-in-1″ hybrid biocatalyst design that combines the individual efficiency of microorganisms while avoiding negative interactions between them. Yeast cells of Ogataea polymorpha VKM Y-2559, Blastobotrys adeninivorans VKM Y-2677, and Debaryomyces hansenii VKM Y-2482 were immobilized in an organosilicon material by using the sol-gel method, resulting in a hybrid biocatalyst. The catalytic activity of the immobilized microorganism mixture was evaluated by employing it as the bioreceptor element of a biosensor. Optical and scanning electron microscopies were used to examine the morphology of the biohybrid material. Elemental distribution analysis confirmed the encapsulation of yeast cells in a matrix composed of methyltriethoxysilane (MTES) and tetraethoxysilane (TEOS) (85 and 15 vol %, respectively). The resulting heterogeneous biocatalyst exhibited excellent performance in determining the biochemical oxygen demand (BOD) index in real surface water samples, with a sensitivity coefficient of 50 ± 3 × 10-3·min-1, a concentration range of 0.3-31 mg/L, long-term stability for 25 days, and a relative standard deviation of 3.8%. These findings demonstrate the potential of the developed hybrid biocatalyst for effective pollution monitoring and wastewater treatment applications.

Immobilization of Bacillus Thuringiensis and applicability in removal of sulfamethazine from soil

Microbial degradation is considered an essential and promising treatment for sulfadimidine contamination of soil. To address the low colonization rates and inefficiencies of typical antibiotic-degrading bacteria, sulfamethazine (SM2)-degrading strain H38 is converted into immobilized bacteria in this study. Results show that the removal rate of SM2 by immobilized strain H38 reaches 98% at 36 h, whereas the removal rate of SM2 by free bacteria reaches 75.2% at 60 h. In addition, the immobilized bacteria H38 exhibits tolerance to a wide range of pH (5-9) and temperature (20 °C-40 °C). As the amount of inoculation increases and the initial concentration of SM2 decreases, the removal rate of SM2 by the immobilized strain H38 increases gradually. Laboratory soil remediation tests show that the immobilized strain H38 can remove 90.0% of SM2 from the soil on the 12th day, which exceeds the removal by free bacteria by 23.9% in the same period. Additionally, the results show that the immobilized strain H38 enhances the overall activity of microorganisms in SM2-contaminated soil. Compared with the SM2 only (control group containing no bacteria) and free bacterial treatment groups, the gene expression levels of ammonia-oxidizing archaea, ammonia-oxidizing bacteria, cbbLG, and cbbM increased significantly in the treatment group with immobilized strain H38. This study shows that immobilized strain H38 can reduce the effect of SM2 on soil ecology to a greater extent than free bacteria, while providing safe and effective remediation.

Production of Phenylacetylcarbinol via Biotransformation Using the Co-Culture of Candida tropicalis TISTR 5306 and Saccharomyces cerevisiae TISTR 5606 as the Biocatalyst

Phenylacetylcarbinol (PAC) is a precursor for the synthesis of several pharmaceuticals, including ephedrine, pseudoephedrine, and norephedrine. PAC is commonly produced through biotransformation using microbial pyruvate decarboxylase (PDC) in the form of frozen-thawed whole cells. However, the lack of microorganisms capable of high PDC activity is the main factor in the production of PAC. In addition, researchers are also looking for ways to utilize agro-industrial residues as an inexpensive carbon source through an integrated biorefinery approach in which sugars can be utilized for bioethanol production and frozen-thawed whole cells for PAC synthesis. In the present study, Candida tropicalis, Saccharomyces cerevisiae, and the co-culture of both strains were compared for their biomass and ethanol concentrations, as well as for their volumetric and specific PDC activities when cultivated in a sugarcane bagasse (SCB) hydrolysate medium (SCBHM). The co-culture that resulted in a higher level of PAC (8.65 ± 0.08 mM) with 26.4 ± 0.9 g L-1 ethanol production was chosen for further experiments. Biomass production was scaled up to 100 L and the kinetic parameters were studied. The biomass harvested from the bioreactor was utilized as frozen-thawed whole cells for the selection of an initial pyruvate (Pyr)-to-benzaldehyde (Bz) concentration ([Pyr]/[Bz]) ratio suitable for the PAC biotransformation in a single-phase emulsion system. The initial [Pyr]/[Bz] at 100/120 mM resulted in higher PAC levels with 10.5 ± 0.2 mM when compared to 200/240 mM (8.60 ± 0.01 mM). A subsequent two-phase emulsion system with Pyr in the aqueous phase, Bz in the organic phase, and frozen-thawed whole cells of the co-culture as the biocatalyst produced a 1.46-fold higher PAC level when compared to a single-phase emulsion system. In addition, the cost analysis strategy indicated preliminary costs of USD 0.82 and 1.01/kg PAC for the single-phase and two-phase emulsion systems, respectively. The results of the present study suggested that the co-culture of C. tropicalis and S. cerevisiae can effectively produce bioethanol and PAC from SCB and would decrease the overall production cost on an industrial scale utilizing the two-phase emulsion system with the proposed multiple-pass strategy.

In vitro assembly of the trehalose bi-enzyme complex with artificial scaffold protein

Introduction: Trehalose is a significant rare sugar known for its stable properties and ability to protect biomolecules from environmental factors. Methods: In this study, we present a novel approach utilizing a scaffold protein-mediated assembly method for the formation of a trehalose bi-enzyme complex. This complex consists of maltooligosyltrehalose synthase (MTSase) and maltooligosyltrehalose trehalohydrolase (MTHase), which work in tandem to catalyze the substrate and enhance the overall catalytic efficiency. Utilizing the specific interaction between cohesin and dockerin, this study presents the implementation of an assembly, an analysis of its efficiency, and an exploration of strategies to enhance enzyme utilization through the construction of a bi-enzyme complex under optimal conditions in vitro. Results and Discussion: The bi-enzyme complex demonstrated a trehalose production level 1.5 times higher than that of the free enzyme mixture at 40 h, with a sustained upward trend. Compared to free enzyme mixtures, the adoption of a scaffold protein-mediated bi-enzyme complex may improve cascade reactions and catalytic effects, thus presenting promising prospects.

Immobilization and docking studies of Carlsberg subtilisin for application in poultry industry

Carlsberg subtilisin from Bacillus licheniformis PB1 was investigated as a potential feed supplement, through immobilizing on bentonite for improving the growth rate of broilers. Initially, the pre-optimized and partially-purified protease was extracted and characterized using SDS-PAGE with MW 27.0 KDa. The MALDI-TOF-MS/MS spectrum confirmed a tryptic peptide peak with m/z 1108.496 referring to the Carlsberg subtilisin as a protein-digesting enzyme with alkaline nature. The highest free enzyme activity (30 U/mg) was observed at 50°C, 1 M potassium phosphate, and pH 8.0. the enhanced stability was observed when the enzyme was adsorbed to an inert solid support with 86.39 ± 4.36% activity retention under 20 optimized conditions. Additionally, the dried immobilized enzyme exhibited only a 5% activity loss after two-week storage at room temperature. Structural modeling (Docking) revealed that hydrophobic interactions between bentonite and amino acids surrounding the catalytic triad keep the enzyme structure intact upon drying at RT. The prominent hygroscopic nature of bentonite facilitated protein structure retention upon drying. During a 46-days study, supplementation of boilers' feed with the subtilisin-bentonite complex promoted significant weight gain i.e. 15.03% in contrast to positive control (p = 0.001).

Entrapment of Glucose Oxidase and Catalase in Silica-Calcium-Alginate Hydrogel Reduces the Release of Gluconic Acid in Must

Glucose oxidase (GOX) and catalase (CAT) were co-immobilized in silica-calcium-alginate hydrogels to degrade must glucose. The effect of the enzyme dose (1.2-2.4 U/mL), the initial must pH (3.6-4.0), and the incubation temperature (10-20 °C) on the glucose consumption, gluconic acid concentration, pH, and color intensity of Verdejo must was studied by using a Box-Behnken experimental design and comparing free and co-immobilized enzymes. A reduction of up to 37.3 g/L of glucose was observed in co-immobilized enzyme-treated must, corresponding to a decrease in its potential alcohol strength of 2.0% vol. (v/v), while achieving a slight decrease in its pH (between 0.28 and 0.60). This slight acidification was due to a significant reduction in the estimated gluconic acid found in the must (up to 73.7%), likely due to its accumulation inside the capsules. Regarding the operational stability of immobilized enzymes, a gradual reduction in glucose consumption was observed over eight consecutive cycles. Finally, co-immobilized enzymes showed enhanced efficiency over a reaction period of 48 h, with an 87.1% higher ratio of glucose consumed per enzyme dose in the second 24 h period compared with free enzymes. These findings provide valuable insights into the performance of GOX-CAT co-immobilized to produce reduced-alcohol wines, mitigating excessive must acidification.

Design of a 3D Amino-Functionalized Rice Husk Ash Nano-Silica/Chitosan/Alginate Composite as Support for Laccase Immobilization

Recycling of agro-industrial waste is one of the major issues addressed in recent years aimed at obtaining products with high added value as a future alternative to traditional ones in the per-spective of a bio-based and circular economy. One of the most produced wastes is rice husk and it is particularly interesting because it is very rich in silica, a material with a high intrinsic value. In the present study, a method to extract silica from rice husk ash (RHA) and to use it as a carrier for the immobilization of laccase from Trametes versicolor was developed. The obtained mesoporous nano-silica was characterized by X-ray diffraction (XRD), ATR-FTIR spectroscopy, Scanning Elec-tron Microscopy (SEM), and Energy Dispersive X-ray spectroscopy (EDS). A nano-silica purity of about 100% was found. Nano-silica was then introduced in a cross-linked chitosan/alginate scaffold to make it more easily recoverable after reuse. To favor laccase immobilization into the composite scaffold, functionalization of the nano-silica with (γ-aminopropyl) triethoxysilane (APTES) was performed. The APTES/RHA nano-silica/chitosan/alginate (ARCA) composite al-lowed to obtain under mild conditions (pH 7, room temperature, 1.5 h reaction time) a robust and easily reusable solid biocatalyst with 3.8 U/g of immobilized enzyme which maintained 50% of its activity after six reuses. The biocatalytic system, tested for syringic acid bioremediation, was able to totally oxidize the contaminant in 24 h.

Fabrication of a Floatable Micron-Sized Enzyme Device Using Diatom Frustules

Immobilization of enzymes has been widely reported due to their reusability, thermal stability, better storage abilities, and so on. However, there are still problems that immobilized enzymes do not have free movements to react to substrates during enzyme reactions and their enzyme activity becomes weak. Moreover, when only the porosity of support materials is focused, some problems such as enzyme distortion can negatively affect the enzyme activity. Being a solution to these problems, a new function "floatability" of enzyme devices has been discussed. A "floatable" micron-sized enzyme device was fabricated to enhance the free movements of immobilized enzymes. Diatom frustules, natural nanoporous biosilica, were used to attach papain enzyme molecules. The floatability of the frustules, evaluated by macroscopic and microscopic methods, was significantly better than that of four other SiO2 materials, such as diatomaceous earth (DE), which have been widely used to fabricate micron-sized enzyme devices. The frustules were fully suspended at 30 °C for 1 h without stirring, although they settled at room temperature. When enzyme assays were performed at room temperature, 37, and 60 °C with or without external stirring, the proposed frustule device showed the highest enzyme activity under all conditions among papain devices similarly prepared using other SiO2 materials. It was confirmed by the free papain experiments that the frustule device was active enough for enzyme reactions. Our data indicated that the high floatability of the reusable frustule device, and its large surface area, is effective in maximizing enzyme activity due to the high probability to react to substrates.

Biotechnological applications of biofilms formed by osmotolerant and halotolerant yeasts

Many microorganisms are capable of developing biofilms under adverse conditions usually related to nutrient limitation. They are complex structures in which cells (in many cases of different species) are embedded in the material that they secrete, the extracellular matrix (ECM), which is composed of proteins, carbohydrates, lipids, and nucleic acids. The ECM has several functions including adhesion, cellular communication, nutrient distribution, and increased community resistance, this being the main drawback when these microorganisms are pathogenic. However, these structures have also proven useful in many biotechnological applications. Until now, the most interest shown in these regards has focused on bacterial biofilms, and the literature describing yeast biofilms is scarce, except for pathological strains. Oceans and other saline reservoirs are full of microorganisms adapted to extreme conditions, and the discovery and knowledge of their properties can be very interesting to explore new uses. Halotolerant and osmotolerant biofilm-forming yeasts have been employed for many years in the food and wine industry, with very few applications in other areas. The experience gained in bioremediation, food production and biocatalysis with bacterial biofilms can be inspiring to find new uses for halotolerant yeast biofilms. In this review, we focus on the biofilms formed by halotolerant and osmotolerant yeasts such as those belonging to Candida, Saccharomyces flor yeasts, Schwannyomyces or Debaryomyces, and their actual or potential biotechnological applications. KEY POINTS: • Biofilm formation by halotolerant and osmotolerant yeasts is reviewed. • Yeasts biofilms have been widely used in food and wine production. • The use of bacterial biofilms in bioremediation can be expanded to halotolerant yeast counterparts.

Recent advances in TiO2/ZnS-based binary and ternary photocatalysts for the degradation of organic pollutants

Semiconductor-mediated photocatalysis plays a pivotal role in the elimination of organic pollutants from water systems. Titanium dioxide (TiO₂) and zinc sulphide (ZnS) semiconductors are commonly utilized as photocatalysts in water purification due to their physical and chemical stability and also large band gap. The drawbacks of both semiconductors, nevertheless, prevent them from being used in real and large-scale treatments. Therefore, binary and ternary-based TiO₂/ZnS nanostructured materials may be a promising solution to improve the quantum efficiency, structural, and electrical features of pure TiO₂ and ZnS semiconductors for improved photoefficiency. This review aims to unravel the development of binary TiO₂/ZnS and the modification of ternary photocatalysts (TiO₂/ZnS-X, X = metal, non-metal, and dye sensitization) by various approaches. The engineered TiO₂/ZnS-based ternary nanostructured materials have exhibited exceptional performance to accelerate the degradation of organic pollutants in wastewater. These materials were fabricated by modifying TiO₂/ZnS binary composite and embedding co-catalysts like carbonaceous material, polymeric material, transition metal, metal oxide, and metal. The relationship between the properties of the resulting nanomaterials and their photocatalytic performances has been examined. This review has also placed a special focus on the synthetic routes applied to derive the binary and ternary TiO₂/ZnS composites. Another aim of this review is to scrutinize the factors that influence the performance of binary and ternary-based TiO₂/ZnS composites on the degradation of organic pollutants. Opportunities for further investigation have been also outlined, along with limitations and impediments based on the current findings.

Silica-Calcium-Alginate Hydrogels for the Co-Immobilization of Glucose Oxidase and Catalase to Reduce the Glucose in Grape Must

Higher temperatures due to climate change are causing greater sugar production in grapes and more alcoholic wines. The use of glucose oxidase (GOX) and catalase (CAT) in grape must is a biotechnological green strategy to produce reduced-alcohol wines. GOX and CAT were effectively co-immobilized by sol-gel entrapment in silica-calcium-alginate hydrogel capsules. The optimal co-immobilization conditions were achieved at a concentration of the colloidal silica, sodium silicate and sodium alginate of 7.38%, 0.49% and 1.51%, respectively, at pH 6.57. The formation of a porous silica-calcium-alginate structure was confirmed by environmental scanning electron microscopy and the elemental analysis of the hydrogel by X-ray spectroscopy. The immobilized GOX showed a Michaelis-Menten kinetic, while the immobilized CAT fits better to an allosteric model. Immobilization also conferred superior GOX activity at low pH and temperature. The capsules showed a good operational stability, as they could be reused for at least 8 cycles. A substantial reduction of 26.3 g/L of glucose was achieved with encapsulated enzymes, which corresponds to a decrease in potential alcoholic strength of must of about 1.5% vol. These results show that co-immobilized GOX and CAT in silica-calcium-alginate hydrogels is a promising strategy to produce reduced-alcohol wines.

Role of immobilised Chlorophyta algae in form of calcium alginate beads for the removal of phenol: isotherm, kinetic and thermodynamic study

In this work, sodium alginate-immobilised Chlorophyta algae were evaluated for phenol uptake. The algae/alginate bead (AAB) characteristics were analysed by means of BET-BJH, FTIR, and SEM-EDX methods, while the adsorption performance of AABs with respect to phenol removal was investigated using batch studies. The parameters found to affect the biosorption capacity of AABs included pH, contact time, initial phenol concentration, adsorbent dosage, stirring rate, particle size, and temperature, with the optimal operating variables identified as a pH of 6, an initial phenol concentration of 50 mg/L, AAB dosage of 5 g/L, and a 200 rpm stirring rate. The adsorption process in such cases reached equilibrium within 120 min, demonstrating a maximum phenol elimination capacity of 9.56 mg/g at 30 °C. The isotherm and kinetic models used to determine this were evaluated using the Chi-square test (X²), the coefficient of determination (R²), and the value of equilibrium capacity, with results that revealed that the Freundlich isotherm provides the best fit for the relevant equilibrium data, as shown by its high R² value (0.96) and low X² value (1.16135); the theoretical data produced by that model were thus closer to the experimental data than that from the Langmuir model. Kinetic analysis showed that the phenol adsorption followed a pseudo-second-order kinetic model. The thermodynamic parameters were thus explored, revealing that the phenol biosorption process is based on spontaneous physisorption with an exothermic reaction due to negative (ΔG°) and (ΔH°) values. The low cost, natural origin, biodegradability, and eco-friendliness of algae/alginate bead sorbents also make them ideally suited for phenol removal in aqueous solutions.

Mesoporous Polymeric Ionic Liquid via Confined Polymerization for Laccase Immobilization towards Efficient Degradation of Phenolic Pollutants

Laccase immobilization is a promising method that can be used for the recyclable treatment of refractory phenolic pollutants (e.g., chlorophenols) under mild conditions, but the method is still hindered by the trade-off limits of supports in terms of their high specific surface area and rich functional groups. Herein, confined polymerization was applied to create abundant amino-functionalized polymeric ionic liquids (PILs) featuring a highly specific surface area and mesoporous structure for chemically immobilizing laccase. Benefiting from this strategy, the specific surface area of the as-synthesized PILs was significantly increased by 60-fold, from 5 to 302 m2/g. Further, a maximum activity recovery of 82% towards laccase was recorded. The tolerance and circulation of the immobilized laccase under harsh operating conditions were significantly improved, and the immobilized laccase retained more than 84% of its initial activity after 15 days. After 10 cycles, the immobilized laccase was still able to maintain 80% of its activity. Compared with the free laccase, the immobilized laccase exhibited enhanced stability in the biodegradation of 2,4-dichlorophenol (2,4-DCP), recording around 80% (seven cycles) efficiency. It is proposed that the synergistic effect between PILs and laccase plays an important role in the enhancement of stability and activity in phenolic pollutant degradation. This work provides a strategy for the development of synthetic methods for PILs and the improvement of immobilized laccase stability.

Renewable, sustainable, and natural lignocellulosic carriers for lipase immobilization: A review

It is well-known that enzymes are molecules particularly susceptible to pH and temperature variations. Immobilization techniques may overcome this weakness besides improving the reusability of the biocatalysts. Given the strong push toward a circular economy, the use of natural lignocellulosic wastes as supports for enzyme immobilization has been increasingly attractive in recent years. This fact is mainly due to their high availability, low costs, and the possibility of reducing the environmental impact that can occur when they are improperly stored. In addition, they have physical and chemical characteristics suitable for enzyme immobilization (large surface area, high rigidity, porosity, reactive functional groups, etc.). This review aims to guide readers and provide them with the tools necessary to select the most suitable methodology for lipase immobilization on lignocellulosic wastes. The importance and the characteristics of an increasingly interesting enzyme, such as lipase, and the advantages and disadvantages of the different immobilization methods will be discussed. The various kinds of lignocellulosic wastes and the processing required to make them suitable as carriers will be also reported.

Label-Free Electrochemical Biosensor Platforms for Cancer Diagnosis: Recent Achievements and Challenges

With its fatal effects, cancer is still one of the most important diseases of today's world. The underlying fact behind this scenario is most probably due to its late diagnosis. That is why the necessity for the detection of different cancer types is obvious. Cancer studies including cancer diagnosis and therapy have been one of the most laborious tasks. Since its early detection significantly affects the following therapy steps, cancer diagnosis is very important. Despite researchers' best efforts, the accurate and rapid diagnosis of cancer is still challenging and difficult to investigate. It is known that electrochemical techniques have been successfully adapted into the cancer diagnosis field. Electrochemical sensor platforms that are brought together with the excellent selectivity of biosensing elements, such as nucleic acids, aptamers or antibodies, have put forth very successful outputs. One of the remarkable achievements of these biomolecule-attached sensors is their lack of need for additional labeling steps, which bring extra burdens such as interference effects or demanding modification protocols. In this review, we aim to outline label-free cancer diagnosis platforms that use electrochemical methods to acquire signals. The classification of the sensing platforms is generally presented according to their recognition element, and the most recent achievements by using these attractive sensing substrates are described in detail. In addition, the current challenges are discussed.

Role and Application of Biocatalysts in Cancer Drug Discovery

A biocatalyst is an enzyme that speeds up or slows down the rate at which a chemical reaction occurs and speeds up certain processes by 108 times. It is used as an anticancer agent because it targets drug activation inside the tumor microenvironment while limiting damage to healthy cells. Biocatalysts have been used for the synthesis of different heterocyclic compounds and is also used in the nano drug delivery systems. The use of nano-biocatalysts for tumor-targeted delivery not only aids in tumor invasion, angiogenesis, and mutagenesis, but also provides information on the expression and activity of many markers related to the microenvironment. Iosmapinol, moclobemide, cinepazide, lysine dioxygenase, epothilone, 1-homophenylalanine, and many more are only some of the anticancer medicines that have been synthesised using biocatalysts. In this review, we have highlighted the application of biocatalysts in cancer therapies as well as the use of biocatalysts in the synthesis of drugs and drug-delivery systems in the tumor microenvironment.

Improving mass transfer rates in microbial cell immobilization system for environmental applications: Synergistic interaction of cells on crude oil biodegradation

Among the various techniques used to clean up polluted environments, bioremediation is the most cost-effective and eco-friendly option. The diversity of microbial communities in a consortium can significantly affect the biodegradability of hazardous organic pollutants, particularly for in situ bioremediation processes. This is largely attributed to interactions between members of a consortium. In this study, the effect of internal diffusion limitations in substrate model biodegradation was firstly examined by immobilized bacterial cells at different particle sizes produced by the electrospray technique. According to the obtained results, for particles with large size, the effectiveness factors (η) were about 0.58-0.67, and the resistance to diffusive on the biodegradation rate was significant, while with decreasing the particle size, η increases and approaches about 1. After selection of suitable bead size, heavy crude oil biodegradation was investigated using a consortium consisting of three oil-degrading bacterial strains at different treatment systems. The removal rate in the suspended co-culture system stands at minimum value of 38% with all three strains which is an indicator of negative interactions among consortium members. Independent immobilization of microorganisms minimizes the competition and antagonistic interactions between strains and leads to more crude oil removal, so that, the biodegradation rate reached 60%.

The application of conventional or magnetic materials to support immobilization of amylolytic enzymes for batch and continuous operation of starch hydrolysis processes

In the production of ethanol, starches are converted into reducing sugars by liquefaction and saccharification processes, which mainly use soluble amylases. These processes are considered wasteful operations as operations to recover the enzymes are not practical economically so immobilizations of amylases to perform both processes appear to be a promising way to obtain more stable and reusable enzymes, to lower costs of enzymatic conversions, and to reduce enzymes degradation/contamination. Although many reviews on enzyme immobilizations are found, they only discuss immobilizations of α-amylase immobilizations on nanoparticles, but other amylases and support types are not well informed or poorly stated. As the knowledge of the developed supports for most amylase immobilizations being used in starch hydrolysis is important, a review describing about their preparations, characteristics, and applications is herewith presented. Based on the results, two major groups were discovered in the last 20 years, which include conventional and magnetic-based supports. Furthermore, several strategies for preparation and immobilization processes, which are more advanced than the previous generation, were also revealed. Although most of the starch hydrolysis processes were conducted in batches, opportunities to develop continuous reactors are offered. However, the continuous operations are difficult to be employed by magnetic-based amylases.

Cell Immobilization for Erythritol Production

Nowadays, commercial erythritol synthesis is performed by free-cell fermentation with fungi in liquid media containing high concentrations of pure carbon sources. Alternative fermentation techniques, such as cell immobilization, could imply an economic and energetic improvement for erythritol-producing factories. The present work describes, for the first time, the feasibility of achieving cell immobilization during erythritol production. Cells of the fungus Moniliella pollinis were successfully immobilized on a cotton cloth which was placed inside a 2-L bioreactor, where they were fed with red grape must supplemented with yeast extract. They produced 47.03 ± 6.16 g/L erythritol in 96 h (yield 0.18 ± 0.04 g/g) over four consecutive fermentation batches. The immobilized cells remained stable and operative during a 456 h period. The erythritol concentration attained was similar (p > 0.05; Tukey HSD test) to the reference value obtained with the use of free cells (41.88 ± 5.18 g/L erythritol) under the same fermentation conditions. The comparable results observed for free and immobilized cells evidences the efficiency of the immobilization system. Therefore, the proposed method for erythritol bioproduction eliminates the need for the continuous preparation of fungal inocula before each fermentation batch, thus reducing the costs of the reagents and energy.

Carboxymethyl-Dextran-Coated Superparamagnetic Iron Oxide Nanoparticles for Drug Delivery: Influence of the Coating Thickness on the Particle Properties

Carboxymethyl-dextran (CMD)-coated iron oxide nanoparticles (IONs) are of great interest in nanomedicine, especially for applications in drug delivery. To develop a magnetically controlled drug delivery system, many factors must be considered, including the composition, surface properties, size and agglomeration, magnetization, cytocompatibility, and drug activity. This study reveals how the CMD coating thickness can influence these particle properties. ION@CMD are synthesized by co-precipitation. A higher quantity of CMD leads to a thicker coating and a reduced superparamagnetic core size with decreasing magnetization. Above 12.5−25.0 g L−1 of CMD, the particles are colloidally stable. All the particles show hydrodynamic diameters < 100 nm and a good cell viability in contact with smooth muscle cells, fulfilling two of the most critical characteristics of drug delivery systems. New insights into the significant impact of agglomeration on the magnetophoretic behavior are shown. Remarkable drug loadings (62%) with the antimicrobial peptide lasioglossin and an excellent efficiency (82.3%) were obtained by covalent coupling with the EDC/NHS (N-ethyl-N′-(3-(dimethylamino)propyl)carbodiimide/N-hydroxysuccinimide) method in comparison with the adsorption method (24% drug loading, 28% efficiency). The systems showed high antimicrobial activity with a minimal inhibitory concentration of 1.13 µM (adsorption) and 1.70 µM (covalent). This system successfully combines an antimicrobial peptide with a magnetically controllable drug carrier.

Novel bio-catalytic degradation of endocrine disrupting compounds in wastewater

Against the backdrop of towering ecological health implications of estrogen pollution and the inefficacies associated with cost-intensive treatment techniques, this study recorded the earliest attempt of developing an inexpensive bacterial laccase-based biocatalysts for biodegradation of EDCs (Endocrine disrupting compounds), particularly estrogens. First, a central composite design was used to investigate the interactive effects of pH (6.0–8.0), inoculum size (100–500 U/mL), and copper (Cu) (25–75 mg/L) on laccase activity and estrogen degradation respectively. Thereafter, biocatalysts was synthesized comprising laccase and glass beads or silver impregnated clay granules (SICG), which was further used to treat estrogen infused aquatic matrices under different reaction conditions. Maximum laccase activities and estrogen removal for the two tested laccases were 620 U/mL (85.8–92.9%) and 689.8 U/mL (86.8–94.6%) for Lysinibacillus sp. BP1 and Lysinibacillus sp. BP2, respectively, within 72 h, under conditions of optimal inoculum size and/or Cu concentration. Apart from a higher estrogen removal rate compared to free laccased, the biocatalysts were more resistant to temperature, pH and other environmental perturbations, and had enhanced storage ability and reusability. In comparison to clay, beads had a higher potential for recyclability and were more stable under certain experimental factors such as pH, reuse, and temperature, as well as storage conditions. Immobilized enzymes were able to remove 100% of E2, as well as over 90% of E1 and EE2, in 24 h, indicating that they could be scaled up to benchtop bioreactor levels.

Recent advancements in enzyme-incorporated nanomaterials: Synthesis, mechanistic formation, and applications

Over the past decade, nanotechnology has been developed and employed across various entities. Among the numerous nanostructured material types, enzyme-incorporated nanomaterials have shown great potential in various fields, as an alternative to biologically derived as well as synthetically developed hybrid structures. The mechanism of incorporating enzyme onto a nanostructure depends on several factors including the method of immobilization, type of nanomaterial, as well as operational and environmental conditions. The prospects of enzyme-incorporated nanomaterials have shown promising results across various applications, such as biocatalysts, biosensors, drug therapy, and wastewater treatment. This is due to their excellent ability to exhibit chemical and physical properties such as high surface-to-volume ratio, recovery and/or reusability rates, sensitivity, response scale, and stable catalytic activity across wide operating conditions. In this review, the evolution of enzyme-incorporated nanomaterials along with their impact on our society due to its state-of-the-art properties, and its significance across different industrial applications are discussed. In addition, the weakness and future prospects of enzyme-incorporated nanomaterials were also discussed to guide scientists for futuristic research and development in this field.