Ultra-high performance liquid chromatography combined with mass spectrometry for determination of aflatoxins using dummy molecularly imprinted polymers deposited on silica-coated magnetic nanoparticles

On-site sensing for aflatoxicosis poisoning via ultraviolet excitable aptasensor based on fluorinated ethylene propylene strip: a promising forensic tool

The environmental contamination by extremophile Aspergillus species, i.e., Aflatoxin B1, is hardly controllable in Southeast Asia and Sub-Saharan Africa, which lack handling resources and controlled storage facilities. Acute aflatoxicosis poisoning from aflatoxin-prone dietary staples could cause acute hepatic necrosis, acute liver failure, and death. Here, as the cheaper, more straightforward, and facile on-site diagnostic kit is needed, we report an ultraviolet-excitable optical aptasensor based on a fluorinated ethylene propylene film strip. Molecular dynamics on the aptamer.AFB1 complex revealed that the AFB1 to the aptamer increases the overall structural stability, suggesting that the aptamer design is suitable for the intended application. Under various influencing factors, the proposed label-free strategy offers a fast 20-min on-site fabrication simplicity and 19-day shelf-life. The one-pot incubation provides an alternative to catalytic detection and exhibited 4 times reusability. The recovery of crude brown sugar, processed peanuts, and long-grain rice were 102.74 ± 0.41 (n = 3), 86.90 ± 3.38 (n = 3), and 98.50 ± 0.42 (n = 3), comparable to High-Performance Liquid Chromatography-Photodiode Array Detector results. This study is novel owing to the peculiar UV-active spectrum fingerprint and the convenient use of hydrophobic film strips that could promote breakthrough innovations and new frontiers for on-site/forensic detection of environmental pollutants.

Cu-nanoparticles@ graphene nanocomposite: A robust and efficient nanocomposite for micro-solid phase extraction of trace aflatoxins in different foodstuffs

Cu-nanoparticles-immobilized graphene (Cu@G) nanocomposite was fabricated in this study by reducing Cu(II) ions in the presence of graphene oxide using a simple chemical reduction step. Cu@G nanocomposite was applied as a sorbent for the SPE of four aflatoxins (AFs). A reusable syringe was filled with the fabricated nanocomposite and used as a sorbent for the micro-solid phase extraction of four AFs (AFB1, AFB2, AFG1, AFG2). The impact of different analytical factors was fully investigated and optimized. Excellent recoveries, ranging from 92.0 to 108.5 %, were detected when evaluating target AFs in samples of rice, maize, and pistachio. The LOD, LOQ, and linear ranges were attained under optimal circumstances in the ranges of 0.0062 µg kg-1, 0.0192 µg kg-1, and 0.0-20 µg kg-1, respectively. The discovered approach provided the dual benefits of a high enrichment capability of Cu-nanoparticles via AFs complexation and a huge porosity of graphene sheets.

Molecularly imprinted dispersive micro solid-phase extraction coupled with high-performance liquid chromatography for the determination of four aflatoxins in various foods

A new dummy template-based molecularly imprinted dispersive micro solid-phase extraction (MI-d-µSPE) coupled with HPLC-FLD developed for the simultaneous determination of four aflatoxins (B1, B2, G1, G2) in various food matrices. The synthesized MIP was used as a dispersive solid-phase extraction (dSPE) sorbent for aflatoxins extraction. The chemometric approach was used to identify the optimum conditions of dSPE. The results showed the amount of MIP sorbent (55 mg), adsorption time (12.5 min), and %ACN (75%) were significant extraction parameters. The method has a detection limit in the range of 0.059-0.208 µg kg-1 and a quantification limit in the range of 0.197-0.694 µg kg-1 for aflatoxins. The intra- and inter-day precision was less than 5%, and recoveries were 79.1-109.4%. The expanded uncertainty of the developed method was found to be 2.9-22.8%. The new MI-d-µSPE with HPLC-FLD method was applied for 37 food matrices.

Biosensors based on core-shell nanoparticles for detecting mycotoxins in food: A review

Mycotoxins are toxic metabolites produced by fungi in the process of infecting agricultural products, posing serious threat to the health of human and animals. Thus, sensitive and reliable analytical techniques for mycotoxin detection are needed. Biosensors equipped with antibodies or aptamers as recognition elements and core-shell nanoparticles (NPs) for the pre-treatment and detection of mycotoxins have been extensively studied. By comparison with monocomponent NPs, core-shell nanostructures exhibit unique optical, electric, magnetic, plasmonic, and catalytic properties due to the combination of functionalities and synergistic effects, resulting in significant improvement of sensing capacities in various platforms, such as surface-enhanced Raman spectroscopy, fluorescence, lateral flow immunoassay and electrochemical sensors. This review focused on the development of core-shell NPs based biosensors for the sensitive and accurate detection of mycotoxins in food samples. Recent developments were categorised and summarised, along with detailed discussion of advantages and shortcomings. The future potential of utilising core-shell NPs in food safety testing was also highlighted.

AFB1 recognition from liver tissue via AFB1 imprinted magnetic nanoparticles

Aflatoxins (AFs) are produced mainly by Aspergillus flavus and Aspergillus parasiticus and aflatoxin B1 (AFB1) is one of the most toxic aflatoxins with its carcinogenic property. AFB1 recognition from samples is very important and PHEMA based AFB1 imprinted magnetic nanoparticles (magAFB1-MIPs) were synthesized for the selective AFB1 recognition from liver tissue. The AFB1-MIPs were synthesized in different mole ratios and NIPs were synthesized for control. Characterization studies of magAFB1-MIPs and NIPs were carried out by swelling tests, surface area measurements, scanning electron microscopy and particle size analysis. The surface area was found as 117 m²/g and the size of the nanoparticles were found as 483 nm in diameter. The percentage yield of polymerization was calculated as 98 % and the template (AFB1) removal ratio from the magAFB1-MIPs was calculated as 91 %. The maximum adsorbtion capacities were calculated as 427.57 ng g^-1 for magAFB1-MIPs and 44.6 ng g^-1 for magNIPs. Selectivity tests showed that magAFB1-MIPs adsorb AFB1 1.74, 4.40, 2.46 times selective than that of AFB2, AFG1 and AFG2 molecules, respectively. AFB1 removal amount from AFB1 spiked liver tissue was satisfactory and recorded as 10.4 ng g^-1 and 54.8 ng g^-1 for 2 ng g^-1 and 10 ng g^-1 spiked liver tissue samples, respectively. AFB1 adsorption amount decrease was found negligible for 10 consecutive adsorption-desorption repeats in reusability study.

Carbon nanodots combined with loop-mediated isothermal amplification (LAMP) for detection of African swine fever virus (ASFV)

The spread of African swine fever virus (ASFV) caused huge economic costs, so early detection is particularly important. Here, we established a fluorescence biosensor based on carbon nanodots (CNDs) and loop-mediated isothermal amplification (LAMP) to ultra-sensitively detect ASFV. LAMP with high efficiency produced a large amount of pyro phosphoric acid and caused pH change in a short time. CNDs with strong light stability had a large fluorescence response at the emission wavelength of 585.5 nm to small pH change by the excitation wavelength of 550 nm. The biosensor realized “turn-off–on” mode for ASFV detection with the detection limit as low as 15.21 copies μL⁻¹. In addition, the biosensor had high accuracy in the actual sample assay. Therefore, the biosensor achieved rapid, sensitive, low-cost, and simple detection for ASFV. Moreover, the biosensor broadened the detection pathway of LAMP as a tool with great development prospect.

Solid-phase extraction techniques based on nanomaterials for mycotoxin analysis: An overview for food and agricultural products

Mycotoxin contamination is a globally concerned problem for food and agricultural products since it may directly or indirectly induce severe threats to human health. Sensitive and selective screening is an efficient strategy to prevent or reduce human and animal exposure to mycotoxins. However, enormous challenges exist in the determination of mycotoxins, arising from complex sample matrices, trace-level analytes, and the co-occurrence of diverse mycotoxins. Appropriate sample preparation is essential to isolate, purify, and enrich mycotoxins from complicated matrices, thus decreasing sample matrix effects and lowering detection limits. With the cross-disciplinary development, new solid-phase extraction strategies have been exploited and integrated with nanotechnology to meet the challenges of mycotoxin analysis. This review summarizes the advance and progress of solid-phase extraction techniques as the methodological solutions for mycotoxin analysis. Emphases are paid on nanomaterials fabricated as trapping media of SPE techniques, including carbonaceous nanoparticles, metal/metal oxide-based nanoparticles, and nanoporous materials. Advantages and limitations are discussed, along with the potential prospects. This article is protected by copyright. All rights reserved.

Mycotoxins detection: view in the lens of molecularly imprinted polymer and nanoparticles

Molecularly imprinted polymers (MIPs) are tailor-made functional composites which selectively recognize and bind the target molecule of interest. MIP composites are products of the massively cross-linked polymer matrices, generated via polymerization, with bio-inspired recognition cavities that are morphologically similar in size, shape and spatial patterns to the target conformation. These features have enabled researchers to expand the field of molecular recognition, more specifically for target with peculiar requirements. Nevertheless, MIPs alone are characterized with weak sensitivity. Besides, nanoparticles (NPs) are remarkably sensitive but also suffer from poor selectivity. Intriguingly, the combination of the two results in a highly sensitive and selective MIP composite. For instance, the conjugation of different functional NPs with MIPs can generate new flexible target capture tools, either a dynamic sensor or a novel drug delivery system. In this regard, although the technology is considered an established and feasible approach, it is still perceived as a burgeoning technology for various fields, which makes it unceasingly worthy reviewing. Therefore, in this review, we attempt to give an update on various custom-made biosensors based on MIPs in combination with various NPs for the detection of mycotoxins, the toxic secondary metabolites of fungi. We first summarize the classification, prevalence, and toxicological characteristics of common mycotoxins. Next, we provide an overview of MIP composites and their characterization, and then segment the role of NPs with respect to common types of MIP-based sensors. At last, conclusions and outlook are discussed.

Comparison and recent progress of molecular imprinting technology and dummy template molecular imprinting technology

Molecular imprinting technology for the preparation of polymers with specific molecular recognition function had become one of the current research hotspots. It has been widely applied in chromatographic separation, antibody and receptor mimetics, solid-phase extraction, bio-sensors, and other fields in the last decades. In this study, molecular imprinting technology was summarized from the points of templates and dummy templates, and four typical target analytes were selected to compare the differences between templates and dummy templates. The current status and prospects of molecular imprinting technology were also proposed.

Magnetic molecularly imprinted polymers for extraction of S-phenylmercapturic acid from urine samples followed by high-performance liquid chromatography

In this study, magnetic molecularly imprinted polymers (MMIPs) were prepared and used as sorbents for extraction of S-phenylmercapturic acid (S-PMA) from urine samples, followed by high-performance liquid chromatography ultraviolet-visible (HPLC-UV/Vis) analysis. The MMIPs were synthesized by the copolymerization reaction of (phenylthio) acetic acid (template molecule), methacrylic acid (functional monomers) and ethylene glycol dimethacrylate (cross-linkers). The morphology, structure property and surface groups of the prepared MMIPs were characterized by scan electron microscopy, transmission electron microscopy, infrared spectroscopy, X-ray diffraction pattern, thermogravimetric analyses, Brunauer-Emmett-Teller and vibrating sample magnetometer. The selectivity of the MMIPs was investigated in the presence of interferents. Various parameters affecting the S-PMA extraction efficiency were investigated, including MMIPs amount, pH, sample volume, desorption solvent, as well as extraction and desorption time. The obtained optimal parameters were as follows: MMIPs amount (20 mg), pH (3.0), sample volume (5 mL), desorption solvent (methanol/acetic acid [9/1, v/v]), extraction time (30 minutes) and desorption time (2 minutes). The method was validated according to the Food and Drug Administration Guidance for Industry on Bioanalytical Method Validation. The calibration curve for the analyte was linear in the concentration range of 0.030-1.0 mg/L (r = 0.9995). The LOD and LOQ of the method were 0.0080 and 0.0267 mg/L, respectively. The enrichment factor of the MMIPs was 5. The relative standard deviations of intra- and inter-day tests were in the range of 3.8-5.1% and 3.9-6.3%, respectively. The recoveries at three different concentrations of 0.10, 0.50 and 0.80 mg/L ranged between 95.2% and 98.6%. In addition, the MMIPs could be reused for at least eight times. The proposed method was successfully applied to the determination of S-PMA in urine samples. In addition, this developed method could be used as a tool in the early screening and clinical diagnosis of benzene intoxication.

Assessment of trace levels of aflatoxins AFB1 and AFB2 in non-dairy beverages by molecularly imprinted polymer based micro solid-phase extraction and liquid chromatography-tandem mass spectrometry

A selective molecularly imprinted polymer (MIP) adsorbent was synthesised and used in a batch micro-solid phase extraction format for isolating aflatoxins (AFB1, and AFB2) from non-dairy beverages before liquid chromatography-tandem mass spectrometry determination. MIP synthesis (precipitation polymerization in 3 : 1 acetonitrile/toluene as a porogen) was performed with 5,7-dimethoxycoumarin (DMC), methacrylic acid (MAA) and divinylbenzene-80 (DVB) as a dummy template, functional monomer and cross-linker, respectively (1 : 4 : 20 molar ratio). 2,2'-Azobisisobutyronitrile (AIBN) was used as a polymerization initiator. The adsorbent MIP (50 mg) was enclosed in a cone-shaped polypropylene membrane (porous membrane protected molecularly imprinted micro-solid phase extraction), and parameters such as sample pH, mechanical (orbital-horizontal) shaking, the extraction time (loading stage), the composition of the eluting solution, and the desorption time were optimised. The highest extraction yields were obtained by using 5 mL of non-dairy beverages (pH adjusted at 6.0), and mechanical shaking (150 rpm) for 15 min. Elution was performed with 5 mL of an acetonitrile/formic acid (97.5 : 2.5) mixture under ultrasound (325 W, 35 kHz) for 15 min. After eluate evaporation to dryness and re-dissolution in 150 μL of the mobile phase, the pre-concentration factor of the method was 33.3, which yields limits of detection within the 0.085-0.207 μg L^-1 range. In addition, the current proposal was shown to be an accurate and precise method through relative standard deviation of intraday and inter-day assays below 18% and analytical recoveries in the range of 91-104%. However, the method was found to suffer from matrix effects.

Current Applications of Magnetic Nanomaterials for Extraction of Mycotoxins, Pesticides, and Pharmaceuticals in Food Commodities

Environmental pollutants, such as mycotoxins, pesticides, and pharmaceuticals, are a group of contaminates that occur naturally, while others are produced from anthropogenic sources. With increased research on the adverse ecological and human health effects of these pollutants, there is an increasing need to regularly monitor their levels in food and the environment in order to ensure food safety and public health. The application of magnetic nanomaterials in the analyses of these pollutants could be promising and offers numerous advantages relative to conventional techniques. Due to their ability for the selective adsorption, and ease of separation as a result of magnetic susceptibility, surface modification, stability, cost-effectiveness, availability, and biodegradability, these unique magnetic nanomaterials exhibit great achievement in the improvement of the extraction of different analytes in food. On the other hand, conventional methods involve longer extraction procedures and utilize large quantities of environmentally unfriendly organic solvents. This review centers its attention on current applications of magnetic nanomaterials and their modifications in the extraction of pollutants in food commodities.

Molecularly Imprinted Polymers for Dispersive (Micro)Solid Phase Extraction: A Review

The review describes the development of batch solid phase extraction procedures based on dispersive (micro)solid phase extraction with molecularly imprinted polymers (MIPs) and magnetic MIPs (MMIPs). Advantages and disadvantages of the various MIPs for dispersive solid phase extraction and dispersive (micro)solid phase extraction are discussed. In addition, an effort has also been made to condense the information regarding MMIPs since there are a great variety of supports (magnetite and magnetite composites with carbon nanotubes, graphene oxide, or organic metal framework) and magnetite surface functionalization mechanisms for enhancing MIP synthesis, including reversible addition-fragmentation chain-transfer (RAFT) polymerization. Finally, drawbacks and future prospects for improving molecularly imprinted (micro)solid phase extraction (MIMSPE) are also appraised.

Amino-based magneto-polymeric-modified mixed iron hydroxides for magnetic solid phase extraction of phenol residues in environmental samples

Mixed iron hydroxides (MIHs) modified with different amino-based polymeric materials, including aminopropyltriethoxysilane, polydopamine, diaminobenzoic acid, polyaniline, and polyphenylenediamine, were comparatively investigated as sorbents for the extraction of phenol compounds. Polyphenylenediamine-modified mixed iron hydroxides (MIH@PPDA) showed high adsorption capability for most target analytes. Its ferromagnetic behavior, with a magnetization of 17.38 emu g^-1, was sufficient for subsequent use in magnetic solid-phase extraction (MSPE). The functional groups, morphology, and magnetic properties of this magnetic nanomaterial were investigated using Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometry, X-ray diffraction, and CHN analysis. High-performance liquid chromatography with a photodiode array detector was used to quantify phenol compounds. The experimental parameters affecting the efficiency of the entire MSPE process were optimized. Good linearity in the range of 0.5-1000 µg L^-1 was obtained (depended on the compound). The detection and quantitation limits varied from 0.01 to 0.3 µg L^-1 and 0.03 to 0.9 µg L^-1, respectively. The enrichment factors for all phenol compounds were in the range of 80-285. The precision in terms of intra- and inter-day relative standard deviations were below 5.8% and 6.2%, respectively. The developed MSPE method was applied to analyze phenol compounds in diverse samples, including soil, drinking water, and fruit. Relative recoveries of 76.7-130.1% were obtained. The MIH@PPDA magneto-polymeric sorbent exhibits good stability and is reliable for a variety of phenol compounds.

Application of molecularly imprinted polymers for the separation and detection of aflatoxin

Aflatoxins are extremely harmful carcinogens to humans and animals. In recent years, attention has been directed toward the application of molecular imprinting polymers for the separation and detection of aflatoxin. In this review, polymerization methods for the preparation of molecular imprinting polymers for aflatoxin detection, such as lump-bulk polymerization, spherical molecular imprinting polymer synthesis, surface-imprinted polymerization, and electropolymerization, are described. The applications of molecular imprinting polymers in solid-phase extraction, biosensors, and the surface-enhanced Raman detection of aflatoxin are also reviewed in this paper.

New Advanced Materials and Sorbent-Based Microextraction Techniques as Strategies in Sample Preparation to Improve the Determination of Natural Toxins in Food Samples

Natural toxins are chemical substances that are not toxic to the organisms that produce them, but which can be a potential risk to human health when ingested through food. Thus, it is of high interest to develop advanced analytical methodologies to control the occurrence of these compounds in food products. However, the analysis of food samples is a challenging task because of the high complexity of these matrices, which hinders the extraction and detection of the analytes. Therefore, sample preparation is a crucial step in food analysis to achieve adequate isolation and/or preconcentration of analytes and provide suitable clean-up of matrix interferences prior to instrumental analysis. Current trends in sample preparation involve moving towards "greener" approaches by scaling down analytical operations, miniaturizing the instruments and integrating new advanced materials as sorbents. The combination of these new materials with sorbent-based microextraction technologies enables the development of high-throughput sample preparation methods, which improve conventional extraction and clean-up procedures. This review gives an overview of the most relevant analytical strategies employed for sorbent-based microextraction of natural toxins of exogenous origin from food, as well as the improvements achieved in food sample preparation by the integration of new advanced materials as sorbents in these microextraction techniques, giving some relevant examples from the last ten years. Challenges and expected future trends are also discussed.

Highly ordered molecularly imprinted mesoporous silica for selective removal of bisphenol A from wastewater

Selective removal of bisphenol A from wastewater is quite challenging primarily because of its low concentration and matrix complexity. To this end, according to the molecular structure of bisphenol A, we designed a functional monomer for the preparation of molecularly imprinted mesoporous silica using click chemistry reaction. The resultant bisphenol A imprinted mesoporous silica was characterized by transmission electron microscopy, small angle X-ray diffraction, and N₂ adsorption-desorption experiments. The results indicated that the bisphenol A imprinted mesoporous silica possessed a highly ordered periodic hexagonal mesostructure with the Brunauer-Emmett-Teller surface area of 944.28 m² /g. The bisphenol A imprinted mesoporous silica showed fast adsorption kinetics and the saturated adsorption capacity reached up to 88.6 mg/g at pH 6.5, and with relative selectivity factors ranged from 1.06 to 3.20. The adsorption efficiency of the bisphenol A imprinted mesoporous silica was above 97.96% after five extraction/elution cycles. The bisphenol A imprinted mesoporous silica was further applied to the selective removal of bisphenol A from real wastewater samples and showed great promise in practical applications.

A facile one-pot green synthesis of β-cyclodextrin decorated porous graphene nanohybrid as a highly efficient adsorbent for extracting aflatoxins from maize and animal feeds

In this paper, β-cyclodextrin (β-CD) supported on porous graphene nanohybrid (β-CDPG) was obtained by self-assembly of functionalized graphene nanosheets into a three-dimensional network in the presence of ascorbic acid via an in situ graphene oxide reduction and β-CD functionalization process during a hydrothermal reaction. The prepared supramolecular nanohybrid was further packed into a reusable syringe filter holder and applied as an adsorbent for solid phase extraction of four aflatoxins (B1, B2, G1, G2). Under optimal conditions, the detection limits and linear dynamic ranges were achieved in the range of 0.0075-0.030 μg kg^-1 and 0.025-100 μg kg^-1, respectively and the relative standard deviations were less than 6.1%. Good recoveries were observed for analyzing target AFs in maize and cereal-based chicken feed samples ranged from 90.5 to 105%. The method offered simultaneous advantages of high supramolecular recognition and enrichment capability of β-CD and the high specific surface area of the porous graphene.

Core-Shell Molecularly Imprinted Polymer Nanocomposites for Biomedical and Environmental Applications

Core-shell polymers represent a class of composite particles comprising of minimum two dissimilar constituents, one at the center known as a core which is occupied by the other called shell. Core-shell molecularly imprinting polymers (CSMIPs) are composites prepared via printing a template molecule (analyte) in the coreshell assembly followed by their elimination to provide the everlasting cavities specific to the template molecules. Various other types of CSMIPs with a partial shell, hollow-core and empty-shell are also prepared. Numerous methods have been reported for synthesizing the CSMIPs. CSMIPs composites could develop the ability to identify template molecules, increase the relative adsorption selectivity and offer higher adsorption capacity. Keen features are measured that permits these polymers to be utilized in numerous applications. It has been developed as a modern technique with the probability for an extensive range of uses in selective adsorption, biomedical fields, food processing, environmental applications, in utilizing the plant's extracts for further applications, and sensors. This review covers the approaches of developing the CSMIPs synthetic schemes, and their application with special emphasis on uses in the biomedical field, food care subjects, plant extracts analysis and in environmental studies.

Electrochemiluminescence Quenching Sensor of a Carboxylic Carbon Nanotubes Modified Glassy Carbon Electrode for Detecting Crystal Violet Based on Nitrogen-doped Graphene Quantum Dots@Peroxydisulfate System

In this work, the electrochemiluminscence system of nitrogen-doped graphene quantum dots (N-GQDs) and K₂S₂O₈ was built for the determination of crystal violet (CV). Meanwhile, a carboxylic carbon nanotubes modified glassy carbon electrode (CCNTs/GCE) was used as an ECL sensor. Thanks to the excellent electron transfer ability and large surface area of CCNTs, the ECL signal of N-GQDs@S₂O₈^2- was remarkablely amplified. With the presence of a low concentration of CV, a distinct decrease of the ECL signal was observed due to a quenching effect of CV on the ECL emission. Moreover, the quenched ECL intensity responded linearly to the logarithm of CV concentration within the range of 0.05 - 5 μmol/L, with a LOD of 45 nmol/L (S/N = 3). The proposed ECL system exhibited high sensitivity and specificity to CV, which was successfully applied in the practical detection of CV in real water samples from a local fishpond farm.

Antibody-functionalized reduced graphene oxide films for highly selective capture and purification of aflatoxins

Pyrenylbutyric acid and streptavidin were coupled to films of reduced graphene oxide (rGO) and then conjugated to a biotinylated broad-spectrum monoclonal antibody against aflatoxins (AFs). It is shown that such films can efficiently and selectively capture AFs inculding AFB₁, AFB₂, AFG₁, AFG₂, AFM₁ and AFM₂. The rGO films were characterized by using scanning electron microscopy, energy-dispersive spectroscopy, and raman spectroscopy. The selectivity and purification performance of the antibody-loaded rGO films were investigated. They were applied to the purification of extremely small samples (100 μL) of AFs-spiked rabbit serum after enzymatic hydrolysis. The AFs were analyzed by ultra-performance liquid chromatography coupled to tandem mass spectrometry. The limits of detection for the six AFs investigated ranged from 50 to 170 pg·mL^-1. The average recoveries of AFs in spiked rabbit serum samples ranged from 55% to 75%, with relative standard deviations of less than 9.4%. Graphical abstract Design of a multifunctional sandwich film that consists of a reduced graphene oxide film base, a pyrenylbutyric acid middle layer and a broad-specificity anti-AF monoclonal antibody surface layer. It was successfully applied to the determination of aflatoxins in only 100 μL of rabbit serum samples with satisfactory selectivity and acceptable accuracy.

Magnetic molecularly imprinted polymer prepared by microwave heating for confirmatory determination of chloramphenicol in chicken feed using high-performance liquid chromatography-tandem mass spectrometry

A magnetic molecularly imprinted polymer (MMIP) for chloramphenicol was prepared using a surface-imprinted and microwave-heating-induced polymerization method. The surfaces of the magnetic particles were first double-bond functionalized with 3-(trimethoxysilyl)propyl methacrylate (γ-MPS), followed by the copolymerization of 4-vinyl pyridine (4-VP) and trimethylolpropane trimethacrylate (TRIM) in the presence of chloramphenicol as a template and 1,1-azobis(cyclohexane-carbonitrile) (ABCN) as an initiator in a mixture of dimethyl sulfoxide and water with microwave heating at 80°C. The magnetic polymer possesses supraparamagnetic properties and was used to concentrate and cleanup chicken feed extract, followed by chromatographic separation using a Lichrospher®100 RP C8 column and detection with two multi-reaction monitoring transitions at m/z 321→ 152 and m/z 321→ 257. The mean recoveries obtained at two spiking levels were in the range of 94.6-100% The relative intra- and inter-day standard deviations were in the range of 1.4-2.6% and 5.1-5.7%, respectively. The detection limit of the method was 0.12 µg kg^-1. This confirmatory method was successfully applied to determine chloramphenicol in chicken feed samples.

Liposome-coated mesoporous silica nanoparticles loaded with L-cysteine for photoelectrochemical immunoassay of aflatoxin B1

The authors describe a photoelectrochemical (PEC) immunoassay for determination of aflatoxin B1 (AFB1) in foodstuff. The competitive immunoreaction is carried out on a microplate coated with a capture antibody against AFB1 using AFB1-bovine serum albumin (BSA)-liposome-coated mesoporous silica nanoparticles (MSN) loaded with L-cysteine as a support. The photocurrent is produced by a photoactive material consisting of cerium-doped Bi2MoO6. Initially, L-cysteine acting as the electron donor is gated in the pores by interaction between mesoporous silica and liposome. Thereafter, AFB1-BSA conjugates are covalently bound to the liposomes. Upon introduction of the analyte (AFB1), the labeled AFB1-BSA complex competes with the analyte for the antibody deposited on the microplate. Accompanying with the immunocomplex, the liposomes on the MSNs are lysed upon addition of Triton X-100. This results in the opening of the pores and in a release of L-cysteine. Free cysteine then induces the electron-hole scavenger of the photoactive nanosheets to increase the photocurrent. The photocurrent (relative to background signal) increases with increasing AFB1 concentration. Under optimum conditions, the photoactive nanosheets display good photoelectrochemical responses, and allow the detection of AFB1 at a concentration as low as 0.1 pg·mL-1 within a linear response in the 0.3 pg·mL-1 to 10 ng·mL-1 concentration range. Accuracy was evaluated by analyzing naturally contaminated and spiked peanut samples by using a commercial AFB1 ELISA kit as the reference, and well-matching results were obtained. Graphical abstract Schematic presentation of a photoelectrochemical immunoassay for AFB1. It is based on the use of Ce-doped Bi2MoO6 nanosheets and of liposome-coated mesoporous silica nanoparticles loaded with L-cysteine.

Molecularly imprinted polymers for the detection of illegal drugs and additives: a review

This review (with 154 refs.) describes the current status of using molecularly imprinted polymers in the extraction and quantitation of illicit drugs and additives. The review starts with an introduction into some synthesis methods (lump MIPs, spherical MIPs, surface imprinting) of MIPs using illicit drugs and additives as templates. The next section covers applications, with subsections on the detection of illegal additives in food, of doping in sports, and of illicit addictive drugs. A particular focus is directed towards current limitations and challenges, on the optimization of methods for preparation of MIPs, their applicability to aqueous samples, the leakage of template molecules, and the identification of the best balance between adsorption capacity and selectivity factor. At last, the need for convincing characterization methods, the lack of uniform parameters for defining selectivity, and the merits and demerits of MIPs prepared using nanomaterials are addressed. Strategies are suggested to solve existing problems, and future developments are discussed with respect to a more widespread use in relevant fields. Graphical abstract This review gives a comprehensive overview of the advances made in molecularly imprinting of polymers for use in the extraction and quantitation of illicit drugs and additives. Methods for syntheses, highlighted applications, limitations and current challenges are specifically addressed.

Newest applications of molecularly imprinted polymers for extraction of contaminants from environmental and food matrices: A review

This paper presents an overview of the recent applications of molecularly imprinted polymers (MIPs) to sample preparation. The review is thought to cover analytical procedures for extraction of contaminants (mainly illegal/noxious organic compounds) from food and environmental matrices, with a particular focus on the various pre-concentration/cleanup techniques, that is offline and online solid-phase extraction (SPE), dispersive SPE (d-SPE), magnetic SPE (MSPE), solid-phase microextraction (SPME) and stir-bar sorptive extraction (SBSE), applied before instrumental quantification. The selectivity and extraction efficiency of MIP-based sorbent phases are critically discussed, also in relation to the physical-chemical properties resulting from the synthetic procedures. A variety of molecularly imprinted sorbents is presented, including hybrid composites embedding carbon nanomaterials and ionic liquids. The analytical performance of MIP materials in sample preparation is commented as function of the complexity of the matrix, and it is compared to that exhibited by (commercial) aspecific and/or immunosorbent phases.

Rational design, preparation and adsorption study of a magnetic molecularly imprinted polymer using a dummy template and a bifunctional monomer

In this study, a molecular docking method and solvation model in computer simulation were applied to simultaneously screen a dummy template and a bifunctional monomer in the rational design of a magnetic molecularly imprinted polymer.