Plasmonic DNA hotspots made from tungsten disulfide nanosheets and gold nanoparticles for ultrasensitive aptamer-based SERS detection of myoglobin

SERS-Based Immunochromatographic Assay for Sensitive Detection of Escherichia coli O157:H7 Using a Novel WS2-AuDTNB Nanotag

E. coli O157:H7 contamination in food and the environment poses a serious threat to human health. Rapid and sensitive identification of foodborne pathogens remains challenging. Here, we prepared tungsten disulfide (WS2)-Au nanocomposites coupled with the Raman signal molecule 5,5'-dithio-bis-(2-nitrobenzoic acid) (DTNB) and antibodies to replace the conventional colloidal gold nanoparticles and applied SERS-active nanotags in the SERS-ICA method for highly sensitive detection of E. coli O157:H7. The large surface area and numerous effective SERS hotspots of WS2-Au nanotags provide superior SERS signals. Under optimized conditions, this ICA achieves the quantitative detection of E. coli O157:H7 in a broad linear range of 8 × 102-8 × 107 CFU/mL and at a low detection limit of 175 CFU/mL. In addition, the test strip indicates high specificity for E. coli O157:H7 identification, favorable reproducibility, and shows good accuracy in the detection of actual food samples, such as milk and pork. The proposed assay can be used for rapid qualitative and quantitative detection of E. coli O157:H7 and has great potential for field application.

Periodic Table of Immunomodulatory Elements and Derived Two-Dimensional Biomaterials

Periodic table of chemical elements serves as the foundation of material chemistry, impacting human health in many different ways. It contributes to the creation, growth, and manipulation of functional metallic, ceramic, metalloid, polymeric, and carbon-based materials on and near an atomic scale. Recent nanotechnology advancements have revolutionized the field of biomedical engineering to tackle longstanding clinical challenges. The use of nano-biomaterials has gained traction in medicine, specifically in the areas of nano-immunoengineering to treat inflammatory and infectious diseases. Two-dimensional (2D) nanomaterials have been found to possess high bioactive surface area and compatibility with human and mammalian cells at controlled doses. Furthermore, these biomaterials have intrinsic immunomodulatory properties, which is crucial for their application in immuno-nanomedicine. While significant progress has been made in understanding their bioactivity and biocompatibility, the exact immunomodulatory responses and mechanisms of these materials are still being explored. Current work outlines an innovative "immunomodulatory periodic table of elements" beyond the periodic table of life, medicine, and microbial genomics and comprehensively reviews the role of each element in designing immunoengineered 2D biomaterials in a group-wise manner. It recapitulates the most recent advances in immunomodulatory nanomaterials, paving the way for the development of new mono, hybrid, composite, and hetero-structured biomaterials.

Low background electrochemical sensor based on HCR towards acute myocardial infarction-specific miRNA detection

Acute myocardial infarction (AMI) accounts for a significant proportion of global fatalities, and early detection is crucial for improving patient outcomes. However, current diagnostic methods often struggle to detect AMI in its early stages. Herein, we present an electrochemical sensor utilizing a fractal gold (FracAu) electrode and hybridization chain reaction (HCR) amplification technology to detect AMI-specific microRNAs (miRNAs). When the target sequence was added, the HCR was triggered, leading to the formation of a long-nicked DNA double helix that efficiently captured a larger quantity of positively charged RuHex molecules, resulting in significant electrochemical signal amplification. More importantly, to avoid false positive signals, exonuclease I (Exo I) was introduced to selectively cleave single-stranded DNA (ssDNA) probes. These ssDNA probes, underwent random hydrolysis from hpDNA probes, could hybridize with helper DNA1 in the absence of the target, initiating the HCR process and producing a false positive signal. The inclusion of Exo I effectively avoided false positive signals and reduced background noise. Under optimized conditions, the fabricated sensor exhibited significant sensitivity and selectivity, showing a broad linear detection range from 10 pM to 10 nM and a low limit of 0.9 fM. The fabricated electrochemical sensor also successfully detected AMI-specific miRNA in real serum samples, underscoring its diagnostic promise. By providing a reliable tool for early detection, the innovative sensor holds significant potential in combating global cardiovascular disease-related mortality rates.

Gold nanoparticles-based biosensors: pioneering solutions for bacterial and viral pathogen detection-a comprehensive review

Gold Nanoparticles (AuNPs) have gained significant attention in biosensor development due to their unique physical, chemical, and optical properties. When incorporated into biosensors, AuNPs offer several advantages, including a high surface area-to-volume ratio, excellent biocompatibility, ease of functionalization, and tunable optical properties. These properties make them ideal for the detection of various biomolecules, including proteins, nucleic acids, and bacterial and viral biomarkers. Traditional methods for detecting bacteria and viruses, such as RT-PCR and ELISA, often suffer from complexities, time consumption, and labor intensiveness. Consequently, researchers are continuously exploring novel devices to address these limitations and effectively detect a diverse array of infectious pathogenic microorganisms. In light of these challenges, nanotechnology has been instrumental in refining the architecture and performance of biosensors. By leveraging advancements in nanomaterials and strategies of biosensor fabrication the sensitivity and specificity of biosensors can be enhanced, enabling more precise detection of pathogenic bacteria and viruses. This review explores the versatility of AuNPs in detecting a variety of biomolecules, including proteins, nucleic acids, and bacterial and viral biomarkers. Furthermore, it evaluates recent advancements in AuNPs-based biosensors for the detection of pathogens, utilizing techniques such as optical biosensors, lateral flow immunoassays, colorimetric immunosensors, electrochemical biosensors, and fluorescence nanobiosensors. Additionally, the study discusses the existing challenges in the field and proposes future directions to improve AuNPs-based biosensors, with a focus on enhancing sensitivity, selectivity, and their utility in clinical and diagnostic applications.

Unleashing the potential of tungsten disulfide: Current trends in biosensing and nanomedicine applications

The discovery of graphene ignites a great deal of interest in the research and advancement of two-dimensional (2D) layered materials. Within it, semiconducting transition metal dichalcogenides (TMDCs) are highly regarded due to their exceptional electrical and optoelectronic properties. Tungsten disulfide (WS2) is a TMDC with intriguing properties, such as biocompatibility, tunable bandgap, and outstanding photoelectric characteristics. These features make it a potential candidate for chemical sensing, biosensing, and tumor therapy. Despite the numerous reviews on the synthesis and application of TMDCs in the biomedical field, no comprehensive study still summarizes and unifies the research trends of WS2 from synthesis to biomedical applications. Therefore, this review aims to present a complete and thorough analysis of the current research trends in WS2 across several biomedical domains, including biosensing and nanomedicine, covering antibacterial applications, tissue engineering, drug delivery, and anticancer treatments. Finally, this review also discusses the potential opportunities and obstacles associated with WS2 to deliver a new outlook for advancing its progress in biomedical research.

Biomarkers and optical based biosensors in cardiac disease detection: early and accurate diagnosis

Rapid and precise detection methods for the early-stage detection of cardiovascular irregularities are crucial to stopping and reducing their development. Cardiovascular diseases (CVDs) are the leading cause of death in the world. Hence, cardiac-related biomarkers are essential for monitoring and managing of process. The necessity for biomarker detection has significantly widened the field of biosensor development. Bio-sensing methods offer rapid detection, low cost, sensitivity, portability, and selectivity in the development of devices for biomarker detection. For the prediction of cardiovascular diseases, some biomarkers can be used, like C-reactive protein (CRP), troponin I or T, creatine kinase (CK-MB), B-type natriuretic peptide (BNP), myoglobin (Mb), suppression of tumorigenicity 2 protein (ST2) and galectin-3 (Gal3). In this review, recent research studies were covered for gaining insight into utilizing optical-based biosensors, including surface plasmon resonance (SPR), photonic crystals (PCs), fluorescence-based techniques, fiber optics, and also Raman spectroscopy biosensors for the ultrasensitive detection of cardiac biomarkers. The main goal of this review is to focus on the improvement of optical biosensors in the future for the diagnosis of heart diseases and to discuss how to enhance their properties for use in medicine. Some main data from each study reviewed are emphasized, including the CVD biomarkers and the response range of the optical-based devices and biosensors.

Metallic and Non-Metallic Plasmonic Nanostructures for LSPR Sensors

Localized surface plasmonic resonance (LSPR) provides a unique scheme for light management and has been demonstrated across a large variety of metallic nanostructures. More recently, non-metallic nanostructures of two-dimensional atomic materials and heterostructures have emerged as a promising, low-cost alternative in order to generate strong LSPR. In this paper, a review of the recent progress made on non-metallic LSPR nanostructures will be provided in comparison with their metallic counterparts. A few applications in optoelectronics and sensors will be highlighted. In addition, the remaining challenges and future perspectives will be discussed.

Microwave-assisted synthesis of blue fluorescent molybdenum nanoclusters with maltose-cysteine Schiff base for detection of myoglobin and γ-aminobutyric acid in biofluids

The fabrication of stable fluorescent MoNCs (molybdenum nanoclusters) in aqueous media is quite challenging as it is not much explored yet. Herein, we report a facile and efficient strategy for fabricating MoNCs using 2,3 dialdehyde maltose-cysteine Schiff base (DAM-cysteine) as a ligand for detecting myoglobin and γ-aminobutyric acid (GABA) in biofluids with high selectivity and sensitivity. The DAM-cysteine-MoNCs displayed fluorescence of bright blue color under a UV light at 365 nm with an emission peak at 444 nm after excitation at 370 nm. The synthesized DAM-cysteine-MoNCs were homogeneously distributed with a mean size of 2.01 ± 0.98 nm as confirmed by the high-resolution transmission electron microscopy (HR-TEM). Further, X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FT-IR) techniques were utilized to confirm the elemental oxidation states and surface functional groups of the DAM-cysteine-MoNCs. After the addition of myoglobin and GABA, the emission peak of DAM-cysteine-MoNCs at 444 nm was significantly quenched. This resulted in the development of a quantitative assay for the detection of myoglobin (0.1-0.5 μM) and GABA (0.125-2.5 μM) with the lower limit of detection as 56.48 and 112.75 nM for myoglobin and GABA, respectively.

Engineered Two-Dimensional Nanostructures as SERS Substrates for Biomolecule Sensing: A Review

Two-dimensional nanostructures (2DNS) attract tremendous interest and have emerged as potential materials for a variety of applications, including biomolecule sensing, due to their high surface-to-volume ratio, tuneable optical and electronic properties. Advancements in the engineering of 2DNS and associated technologies have opened up new opportunities. Surface-enhanced Raman scattering (SERS) is a rapid, highly sensitive, non-destructive analytical technique with exceptional signal amplification potential. Several structurally and chemically engineered 2DNS with added advantages (e.g., π-π* interaction), over plasmonic SERS substrates, have been developed specifically towards biomolecule sensing in a complex matrix, such as biological fluids. This review focuses on the recent developments of 2DNS-SERS substrates for biomolecule sensor applications. The recent advancements in engineered 2DNS, particularly for SERS substrates, have been systematically surveyed. In SERS substrates, 2DNS are used as either a standalone signal enhancer or as support for the dispersion of plasmonic nanostructures. The current challenges and future opportunities in this synergetic combination have also been discussed. Given the prospects in the design and preparation of newer 2DNS, this review can give a critical view on the current status, challenges and opportunities to extrapolate their applications in biomolecule detection.

Ultrasensitive Electrochemiluminescence Immunoassay Based on Signal Amplification of 0D Au-2D WS2 Nano-Hybrid Materials

In this study, we proposed a novel Ru(bpy)₃²⁺-Au-WS₂ nanocomposite (Ru-Au-WS₂ NCs) nano-hybrid electrochemiluminescence (ECL) probe for the highly sensitive detection of carcinoembryonic antigen (CEA). This system utilizes Au nanoparticles (Au NPs) as a bridge to graft the high-performance of a Ru(bpy)₃²⁺ ECL emitter and WS₂ nanosheet with excellent electrochemical performance into an ECL platform, which shows outstanding anodic ECL performance and biosensing platform due to the synergetic effect and biocompatibility of Au NPs and WS₂ nanosheet. Because the ECL intensity of Ru(bpy)₃²⁺ is sensitively affected by the antibody-antigen insulator, a preferable linear dependence was obtained in the concentration range of CEA from 1 pg·mL^-1 to 350 ng·mL^-1 with high selectivity (LOD of 0.3 pg·mL^-1, S/N = 3). Moreover, the ECL platform had good reproducibility and stability and exhibited excellent anti-interference performance in the detection process of CEA. We believe that the platform we have developed can expand the opportunities for the detection of additional high specificity-related antibodies/antigens and demonstrate broad prospects for disease diagnosis and biochemical research.

One-pot fabrication of Mo1-xWxS2 alloy nanosheets as SERS substrates with highly Raman enhancement effect and long-term stability

A new Mo_1-xW_xS₂ two-dimensional nanosheets were prepared by the one-pot method. After certain Mo atoms in MoS₂ were replaced by W ones in a hydrothermal reduction procedure, Mo_1-xW_xS₂ was formed on the Mo foil. Well enhanced Mo_1-xW_xS₂ nanosheets were prepared when the sodium tungstate concentration got under control. Various characterizations were carried out, which indicate that Mo_1-xW_xS₂ nanosheets with good crystallinity. Compared with MoS₂, the Raman intensity of Rhodamine 6G (10^-6 M) was amplified by 1.7 times with Mo_1-xW_xS₂ nanosheets as the substrate. The characteristic Raman peaks could still be clearly distinguished until the concentration of Rhodamine 6G (R6G), Methylene blue (MB) and Crystal violet (CV) down to 10^-8, 10^-8 and 10^-7 M, respectively. With abundant edge active sites that facilitate charge transfer, Mo_1-xW_xS₂ nanosheets could better enhance SERS signals of target detection molecules and get a good linear relationship exists within the concentration and Raman peak strength. In addition, R6G SERS detection also shows excellent reproducibility and long-term stability of this TMDs SERS substrate.

N, Adigal S, Lukose J, Kartha VB, Chidangil S. Cardiovascular biomarkers in body fluids: progress and prospects in optical sensors

Cardiovascular diseases (CVD) are the major causative factors for high mortality and morbidity in developing and developed nations. The biomarker detection plays a crucial role in the early diagnosis of several non-infectious and life-threatening diseases like CVD and many cancers, which in turn will help in more successful therapy, reducing the mortality rate. Biomarkers have diagnostic, prognostic and therapeutic significances. The search for novel biomarkers using proteomics, bio-sensing, micro-fluidics, and spectroscopic techniques with good sensitivity and specificity for CVD is progressing rapidly at present, in addition to the use of gold standard biomarkers like troponin. This review is dealing with the current progress and prospects in biomarker research for the diagnosis of cardiovascular diseases. Expert opinion. Fast diagnosis of cardiovascular diseases (CVDs) can help to provide rapid medical intervention, which can affect the patient's short and long-term health. Identification and detection of proper biomarkers for early diagnosis are crucial for successful therapy and prognosis of CVDs. The present review discusses the analysis of clinical samples such as whole blood, blood serum, and other body fluids using techniques like high-performance liquid chromatography-LASER/LED-induced fluorescence, Raman spectroscopy, mainly, optical methods, combined with nanotechnology and micro-fluidic technologies, to probe patterns of multiple markers (marker signatures) as compared to conventional techniques.

Gold Nanocone Array with Extensive Electromagnetic Fields for Highly Reproducible Surface-Enhanced Raman Scattering Measurements

Surface-enhanced Raman scattering (SERS) is a technique used to distinguish the constitution of disease-related biomarkers in liquid biopsies, such as exosomes and circulating tumor cells, without any recognition elements. Previous studies using metal nanoparticle aggregates and angular nanostructures have achieved the detection of various biomarkers owing to strong hot spots and electromagnetic (EM) fields by localized surface plasmon resonance (LSPR). Although these SERS platforms enable significant enhancement of Raman signals, they still have some problems with the fabrication reproducibility of platforms in obtaining reproducible SERS signals. Therefore, highly reproducible fabrication of SERS platforms is required. Here, we propose the application of a polymer-based gold (Au) nanocone array (Au NCA), which extensively generates an enhanced EM field near the Au NCA surface by LSPR. This approach was experimentally demonstrated using a 785 nm laser, typically used for SERS measurements, and showed excellent substrate-to-substrate reproducibility (relative standard deviation (RSD) < 6%) using an extremely simple fabrication procedure and very low laser energy. These results proved that a Au NCA can be used as a highly reproducible SERS measurement to distinguish the constitution of biomarkers.

Aptamers Targeting Cardiac Biomarkers as an Analytical Tool for the Diagnostics of Cardiovascular Diseases: A Review

The detection of cardiac biomarkers is used for diagnostics, prognostics, and the risk assessment of cardiovascular diseases. The analysis of cardiac biomarkers is routinely performed with high-sensitivity immunological assays. Aptamers offer an attractive alternative to antibodies for analytical applications but, to date, are not widely practically implemented in diagnostics and medicinal research. This review summarizes the information on the most common cardiac biomarkers and the current state of aptamer research regarding these biomarkers. Aptamers as an analytical tool are well established for troponin I, troponin T, myoglobin, and C-reactive protein. For the rest of the considered cardiac biomarkers, the isolation of novel aptamers or more detailed characterization of the known aptamers are required. More attention should be addressed to the development of dual-aptamer sandwich detection assays and to the studies of aptamer sensing in alternative biological fluids. The universalization of aptamer-based biomarker detection platforms and the integration of aptamer-based sensing to clinical studies are demanded for the practical implementation of aptamers to routine diagnostics. Nevertheless, the wide usage of aptamers for the diagnostics of cardiovascular diseases is promising for the future, with respect to both point-of-care and laboratory testing.

Plasmonic Metal Nanoparticles Hybridized with 2D Nanomaterials for SERS Detection: A Review

In SERS analysis, the specificity of molecular fingerprints is combined with potential single-molecule sensitivity so that is an attractive tool to detect molecules in trace amounts. Although several substrates have been widely used from early on, there are still some problems such as the difficulties to bind some molecules to the substrate. With the development of nanotechnology, an increasing interest has been focused on plasmonic metal nanoparticles hybridized with (2D) nanomaterials due to their unique properties. More frequently, the excellent properties of the hybrids compounds have been used to improve the drawbacks of the SERS platforms in order to create a system with outstanding properties. In this review, the physics and working principles of SERS will be provided along with the properties of differently shaped metal nanoparticles. After that, an overview on how the hybrid compounds can be engineered to obtain the SERS platform with unique properties will be given.

High-sensitivity and versatile plasmonic biosensor based on grain boundaries in polycrystalline 1L WS2 films

Structural defects play an important role in exploitation of two-dimensional layered materials (2DLMs) for advanced biosensors with the increasingly high sensitivity and low detection limit. Grain boundaries (GBs), as an important type of structural defect in polycrystalline 2DLM films, potentially provide sufficient active defect sites for the immobilization of bioreceptor units via chemical functionalization. In this work, we report the selective functionalization of high-density GBs with complementary DNA receptors, via gold nanoparticle (AuNP) linkers, in wafer-scale polycrystalline monolayer (1L) W(Mo)S₂ films as versatile plasmonic biosensing platforms. The large surface area and GB-rich nature of the polycrystalline 1L WS₂ film enabled the immobilization of bioreceptors in high surface density with spatial uniformity, while the AuNPs perform not only as bioreceptor linkers, but also promote detection sensitivity through surface plasmon resonance enhancement effect. Therefore, the presented biosensor demonstrated highly sensitive and selective sub-femto-molar detection of representative RNA sequences from the novel coronavirus (RdRp, ORF1ad and E). This work demonstrates the immense potential of AuNP-decorated GB-rich 2DLMs in the design of ultra-sensitive biosensing platforms for the detection of biological targets beyond RNA, bringing new opportunities for novel healthcare technologies.

Nanomaterial-based aptasensors as an efficient substitute for cardiovascular disease diagnosis: Future of smart biosensors

As a major cause of deaths in developed countries, cardiovascular disease (CVD) has been a big burden for human health systems. Its early and rapid detection is crucial to efficiently apply appropriate on time therapy and to ultimately reduce the associated mortality rate. Aptamers, known as single-stranded DNA/RNA or oligonucleotides containing receptors and/or catalytic properties, have been widely employed in biodetection platforms due to their beneficial properties. Like antibodies, aptamers have served as artificial target receptors in affinity biosensors. Currently, advanced biosensors with improved sensitivity and specificity are fabricated by the synergistic combination of aptamers and diverse nanomaterials. Herein, we review the current development and applications of nanomaterial-based aptasensors for the recognition of CVD biomarkers with special emphasis on electrochemical and optical technologies. The performance of aptasensors has been assessed further in terms of key quality assurance metrics along with discussions on recent technologies developed for the amplification of signals with enhanced portability.

Advances in Surface-Enhanced Raman Scattering-Based Aptasensors for Food Safety Detection

Owing to the excellent performances of high sensitivity, high specificity, on-site detection, and multiplexing capability, surface-enhanced Raman scattering (SERS)-based aptasensors have performed prosperous applications and gained impressive progress in food safety. Herein, we reviewed the SERS-based aptasensors from the principles to specific applications in food safety. First, the sensor-working principles, SERS label design and preparation are introduced. Then, the popular platforms in the aptasensors are summarized with their advantages and disadvantages, followed by their representative applications. Further, the specific applications of developing SERS-based aptasensors in food safety are systematically provided. Moreover, the multiplex analysis using SERS labels are highlighted. Finally, challenges and perspectives for improving the SERS-based aptasensor performance are also discussed, aiming to give some proposes for researchers to choose suitable SERS-based aptasensors according to specific applications.

MoS2 Nanodonuts for High-Sensitivity Surface-Enhanced Raman Spectroscopy

Nanohybrids of graphene and two-dimensional (2D) layered transition metal dichalcogenides (TMD) nanostructures can provide a promising substrate for extraordinary surface-enhanced Raman spectroscopy (SERS) due to the combined electromagnetic enhancement on TMD nanostructures via localized surface plasmonic resonance (LSPR) and chemical enhancement on graphene. In these nanohybrid SERS substrates, the LSPR on TMD nanostructures is affected by the TMD morphology. Herein, we report the first successful growth of MoS₂ nanodonuts (N-donuts) on graphene using a vapor transport process on graphene. Using Rhodamine 6G (R6G) as a probe, SERS spectra were compared on MoS₂ N-donuts/graphene nanohybrids substrates. A remarkably high R6G SERS sensitivity up to 2 × 10⁻¹² M has been obtained, which can be attributed to the more robust LSPR effect than in other TMD nanostructures such as nanodiscs as suggested by the finite-difference time-domain simulation. This result demonstrates that non-metallic TMD/graphene nanohybrids substrates can have SERS sensitivity up to one order of magnitude higher than that reported on the plasmonic metal nanostructures/2D materials SERS substrates, providing a promising scheme for high-sensitivity, low-cost applications for biosensing.

Accessing BCG in infected macrophages by antibody-mediated drug delivery system and tracking by surface-enhanced Raman scattering spectroscopy

Gold nanoparticles (AuNP) modified with antibody and rifampicin (RP) were tested against Mycobacterium bovis Bacillus Calmette-Guérin (BCG), which previously generated in vitro infection of macrophages from mice. Such a drug delivery system works as nanocarrier for RP and presented lower toxicity for macrophages cells than each separated component. Surface-enhanced Raman scattering (SERS) spectroscopy and fluorescence microscopy were used as analytical tools for the characterization of the internalization of gold nanocarriers into macrophage cells. The effective antibiotic action of RP, when combined with gold nanocarrier, was confirmed by dead-live assay of BCG bacteria lysed from macrophages after incubation. Such results indicate the delivery of RP to BCG bacteria, which were infecting macrophages, occurred with remarkable efficiency. It was rationalized based on the strategy used for the adsorption of antibody molecules on gold surface.

Metal Nanoparticles/MoS2 Surface-Enhanced Raman Scattering-Based Sandwich Immunoassay for α-Fetoprotein Detection

The detection of cancer biomarkers at an early stage of tumor development is vital for effective diagnosis and treatment of cancer. Current diagnostic tools can often detect cancer only when the biomarker levels are already too high, so that the tumors have spread and treatments are less effective. It is urgent therefore to develop highly sensitive assays for the detection of such biomarkers at the lowest possible concentration. In this context, we developed a sandwich immunoassay based on surface-enhanced Raman scattering (SERS) for the ultrasensitive detection of α-fetoprotein (AFP), which is typically present in human serum as a biomarker indicative of early stages of hepatocellular carcinoma. In the immunoassay design, molybdenum disulfide (MoS2) modified with a monoclonal antibody was used as a capture probe for AFP. A secondary antibody linked to an SERS-encoded nanoparticle was employed as the Raman signal reporter, that is, the transducer for AFP detection. The sandwich immunocomplex "capture probe/target/SERS tag" was deposited on a silicon wafer and decorated with silver-coated gold nanocubes to increase the density of "hot spots" on the surface of the immunosensor. The developed SERS immunosensor exhibits a wide linear detection range (1 pg mL-1 to 10 ng mL-1) with a limit of detection as low as 0.03 pg mL-1 toward AFP with good reproducibility (RSD < 6%) and stability. These parameters demonstrate that the proposed immunosensor has the potential to be used as an analytical platform for the detection of early-stage cancer biomarkers in clinical applications.

Ag@WS2 quantum dots for Surface Enhanced Raman Spectroscopy: Enhanced charge transfer induced highly sensitive detection of thiram from honey and beverages

Novel SERS substrates is urgently in demand for rapid and sensitive analysis of toxic agrochemicals from food. In this work, a monodispersed tungsten disulfide quantum dots modified silver nanosphere (Ag@WS₂QD) was prepared and used as SERS substrate. Ag@WS₂QD generated uniform and stable SERS signals within 2 min, displaying great promise in "mixing and reading" detection. Compared to unmodified colloidal silver nanoparticles, 4 times higher analytical enhancement factor was found in Ag@WS₂QD. Density functional theory calculation verified the enhanced charge transfer within the coupling systems of molecule-Ag@WS₂QD. Besides, the unique surface properties are beneficial for the enrichment of specific molecule. Both the chemical extraction and enhanced charge transfer contributes to rapid and sensitive SERS detection of Ag@WS₂QD. A "mixing and reading" SERS method for thiram from honey and four kinds of juice was developed from Ag@WS₂QD, showing great promise for rapid and direct SERS detection for toxic agrochemicals and further applications.

Recent advancement in biomedical applications on the surface of two-dimensional materials: from biosensing to tissue engineering

As biosensors and biomedical devices have become increasingly important to everyday diagnostics and monitoring, there are tremendous, and constant efforts towards developing and improving the reliability and versatility of such technology. As they offer high surface area-to-volume ratios and a diverse range of properties, from electronic to optical, two dimensional (2D) materials have proven to be very promising candidates for biological applications and technologies. Due to the dimensionality, 2D materials facilitate many interfacial phenomena that have shown to significantly improve the performance of biosensors, while recent advances in synthesis techniques and surface engineering methods also enable the realization of future biomedical devices. This short review aims to highlight the influence of 2D material surfaces and the properties that arise due to their 2D structure. Using recent (within the last few years) examples of biosensors and biomedical applications, we emphasize the important role of 2D materials in advancing developments and research for biosensing and healthcare.

Biolayer interferometry-SELEX for Shiga toxin antigenic-peptide aptamers & detection via chitosan-WSe2 aptasensor

We report biolayer interferometry based in-vitro selection technique (BLI-SELEX) for fishing out specific aptamers against E. coli Shiga toxin subtypes viz., stx1 & stx2 via epitopic peptides. BLI-SELEX is a one-step technique for rapidly generating aptamers against protein biomarkers in a microtiter plate format, obliterating the need for multiple enrichment rounds to harvest high-affinity aptamers as in conventional SELEX. Two unique aptamers selected against stx1 & stx2 with picomolar K_d (~47 pM & ~29 pM, respectively) were successfully used to fabricate voltammetric diagnostic assay via immobilization onto chitosan exfoliated 2D tungsten diselenide (WSe₂) nanosheet platform. These aptamers modified nanosensors showed high sensitivity of ~ 5.0 μA ng^-1 mL, a dynamic response range from 50 pg mL^-1 to 100 ng mL^-1, with a detection limit of 44.5 pg mL^-1 & 41.3 pg mL^-1 for stx subtypes, respectively and showed low cross-reactivity in spiked urine, serum and milk samples. The synergistic effect of selective aptamers & high sensitivity imparted by 2D transition metal dichalcogenide (TMD) highlights the superior potential of a fabricated nanosensor for bacterial toxin detection.

Application of surface-enhanced Raman spectroscopy in fast detection of toxic and harmful substances in food

Surface-enhanced Raman spectroscopy (SERS) is being considered as a powerful technique in the area of food safety due to its rapidity, sensitivity, portability, and non-destructive features. This review aims to provide a comprehensive understanding of SERS applications in fast detection of toxic and harmful substances in food matrix. The enhancement mechanism of SERS, classification of active substrates, detection methods, and their advantages and disadvantages are briefly discussed in the review. The latest research progress of fast SERS detection of food-borne pathogens, mycotoxins, shellfish toxins, illegal food additives, and drug residues are highlighted in sections of the review. According to the current status of SERS detection of food-derived toxic and harmful substances, the review comes up with certain problems to be urgently resolved in SERS and brings up the perspectives on the future directions of SERS based biosensors.

Recent Trends in Electrochemical Sensors for Vital Biomedical Markers Using Hybrid Nanostructured Materials

This work provides a succinct insight into the recent developments in electrochemical quantification of vital biomedical markers using hybrid metallic composite nanostructures. After a brief introduction to the biomarkers, five types of crucial biomarkers, which require timely and periodical monitoring, are shortlisted, namely, cancer, cardiac, inflammatory, diabetic and renal biomarkers. This review emphasizes the usage and advantages of hybrid nanostructured materials as the recognition matrices toward the detection of vital biomarkers. Different transduction methods (fluorescence, electrophoresis, chemiluminescence, electrochemiluminescence, surface plasmon resonance, surface-enhanced Raman spectroscopy) reported for the biomarkers are discussed comprehensively to present an overview of the current research works. Recent advancements in the electrochemical (amperometric, voltammetric, and impedimetric) sensor systems constructed with metal nanoparticle-derived hybrid composite nanostructures toward the selective detection of chosen vital biomarkers are specifically analyzed. It describes the challenges involved and the strategies reported for the development of selective, sensitive, and disposable electrochemical biosensors with the details of fabrication, functionalization, and applications of hybrid metallic composite nanostructures.

Aptamer and gold nanorod-based fumonisin B1 assay using both fluorometry and SERS

An aptamer-based assay is presented for the determination of fumonisin B1 (FB1). It is bimodal in that both surface-enhanced Raman spectroscopy (SERS) and fluorometry are applied for quantitation. It makes use of platinum-coated gold nanorod (AuNR) and DNA sequences. The complementary DNA of aptamer (cDNA) against FB1 is immobilized on the surface of AuNR. The aptamer of FB1 modified with Cy5.5 are complementarily hybridized with cDNA. In the absence of FB1, the aptamer and its cDNA associate. In this situation, strong SERS and weak fluorescence signals are obtained. In the presence of FB1, the aptamer disassociates with its cDNA and binds the target. As the concentration of FB1 increases, the SERS and fluorescence signal intensities of the mixture are gradually decreased and increased, respectively. Under optimized conditions, the SERS signal at 1366 cm^-1 decreases linearly in the 10-500 pg mL^-1 concentration range with the calibration equation of y = 1997lgx-594 (the coefficient of determination is 0.998). The fluorescence signal at 670 nm increases linearly in the 10-250 pg mL^-1 concentration range with the calibration equation of y = 500lgx-383 (the coefficient of determination is 0.991). The assay was applied to the determination of FB1 contents in spiked corn samples. The average recoveries ranged from 92 to 107%, confirming the practicality of this method. The results obtained by this assay are in good agreement with that of LC-MS/MS method. Graphical abstractSchematic illustration of a bimodal aptasensor based on surface enhanced Raman scattering (SERS) and fluorescence change for the detection of fumonisin B1 (FB1).

Indirect surface-enhanced Raman scattering assay of insulin-like growth factor 2 receptor protein by combining the aptamer modified gold substrate and silver nanoprobes

An indirect aptamer-based SERS assay for insulin-like growth factor 2 receptor (IGF-IIR) protein was developed. The gold substrate and silver nanoparticles (AgNPs) were employed simultaneously to achieve double enhancement for SERS signals. Firstly, the five commercial SERS substrates including Enspectr, Ocean-Au, Ocean-AG, Ocean-SP and Q-SERS substrates were evaluated using 4-mercaptobenzoic acid (4-MBA). The Q-SERS substrate was selected based on low relative standard deviation (RSD, 8.6%) and high enhancement factor (EF, 8.7*10⁵), using a 785 nm laser. The aptamer for IGF-IIR protein was designed to include two sequences: one grafted on gold substrate to specifically capture the IGF-IIR protein and a second one forming a 3' sticky bridge to capture SERS nanotags. The SERS nanotag was composed by AgNPs (20 nm), 4-MBA and DNA probes that can hybridize with the aptamer. Due to the steric-hindrance effect, when the aptamer doesn't combine with IGF-IIR protein, it only can capture the SERS nanotags. Therefore, there was a negative correlation between the concentration of IGF-IIR protein and the intensity of 4-MBA at 1076 cm^-1. The detection limit reached to 141.2 fM and linear range was from 10 pM to 1 μM. The SERS aptasensor also exhibits a high reproducibility with an average RSD of 4.5%. The interference test was conducted with other four proteins to verify the accuracy of measuring. The study provides an approach to quantitative determination of proteins based on specific recognition and nucleic acid hybridization of aptamers, to establish sandwich structure for SERS enhancement. Graphical abstractSchematic representation of surface-enhanced Raman scattering (SERS) assay on insulin-like growth factor 2 receptor (IGF-IIR) protein by combining the aptamer modified gold substrate and 4-mercaptobenzoic acid (4-MBA) and DNA probe modified silver nanoparticles.

Label-free SERS diagnostics of radiation-induced injury via detecting the biomarker Raman signal in the serum and urine bio-samples based on Au-NPs array substrates

A sensitive approach based on surface enhanced Raman spectroscopy (SERS) has been developed to evaluate the radiation caused biological injury. To achieve the effective SERS substrate, canonical anodic aluminum oxide (AAO) templates with regular array of nanotips were fabricated, and by plasma sputtering the gold nanoparticles (Au-NPs) were distributed on the nanotips to form the Au-NPs array with plenty of hotspots. The SERS substrates were utilized to examine the serum samples taken from the mice with the treatment of total body irradiation (TBI) of X-ray. The impact of TBI on the mice was analyzed and it was found that the SERS peak intensity at 532 cm^-1 increased as a function of duration or dose of TBI. We confirmed that this Raman signature belongs to the myoglobin as a biomarker for the muscle damage due to the radiation caused injury. Furthermore, we also tested several blood and urine specimen of cancer patients who received radiotherapy. The results showed that our approach to some extent could distinguish the bio-samples from normal, X-ray treated and untreated individuals. Therefore, the proposed methodology may have the potential for prompt prognosis of radiation injury at early stage.

Two-Dimensional Materials in Biosensing and Healthcare: From In Vitro Diagnostics to Optogenetics and Beyond

Since the isolation of graphene in 2004, there has been an exponentially growing number of reports on layered two-dimensional (2D) materials for applications ranging from protective coatings to biochemical sensing. Due to the exceptional, and often tunable, electrical, optical, electrochemical, and physical properties of these materials, they can serve as the active sensing element or a supporting substrate for diverse healthcare applications. In this review, we provide a survey of the recent reports on the applications of 2D materials in biosensing and other emerging healthcare areas, ranging from wearable technologies to optogenetics to neural interfacing. Specifically, this review provides (i) a holistic evaluation of relevant material properties across a wide range of 2D systems, (ii) a comparison of 2D material-based biosensors to the state-of-the-art, (iii) relevant material synthesis approaches specifically reported for healthcare applications, and (iv) the technological considerations to facilitate mass production and commercialization.

Nanomaterial based aptasensors for clinical and environmental diagnostic applications

Nanomaterials have been exploited extensively to fabricate various biosensors for clinical diagnostics and food & environmental monitoring. These materials in conjugation with highly specific aptamers (next-gen antibody mimics) have enhanced the selectivity, sensitivity and rapidness of the developed aptasensors for numerous targets ranging from small molecules such as heavy metal ions to complex matrices containing large entities like cells. In this review, we highlight the recent advancements in nanomaterial based aptasensors from the past five years also including the basics of conventionally used detection methodologies that paved the way for futuristic sensing techniques. The aptasensors have been categorised based upon these detection techniques and their modifications viz., colorimetric, fluorometric, Raman spectroscopy, electro-chemiluminescence, voltammetric, impedimetric and mechanical force-based sensing of a multitude of targets are discussed in detail. The bio-interaction of these numerous nanomaterials with the aptameric component and that of the complete aptasensor with the target have been studied in great depth. This review thus acts as a compendium for nanomaterial based aptasensors and their applications in the field of clinical and environmental diagnosis.

Fluorometric determination of cardiac myoglobin based on energy transfer from a pyrene-labeled aptamer to graphene oxide

The authors describe a fluorometric assay for cardiac myoglobin (Mb), a marker for myocardial infarction. An Mb-binding aptamer was labeled with pyrene and adsorbed on the surface of graphene oxide (GO) via noncovalent and reversible binding forces. This causes the fluorescence of pyrene (best measured at excitation/emission wavelengths of 275/376 nm) to be quenched. However, fluorescence is restored on addition of pyrene due to the strong affinity between Mb and aptamer which causes its separation from GO. Fluorescence increases linearly in the 5.6-450 pM Mb concentration range, and the lower detection limit is 3.9 pM (S/N = 3). The assay was applied to the determination of cardiac Mb in spiked serum, and satisfactory results were obtained. Graphical abstract Schematic presentation of the detection of Mb (cardiac myoglobin) by using a fluorometric method based on pyrene-modified anti-Mb aptamer and GO (graphene oxide) through fluorescence quenching and subsequent recovery.

A fast response TLC-SERS substrate for on-site detection of hydrophilic and hydrophobic adulterants in botanical dietary supplements

Schematic illustration of TLC-SERS for detection of hydrophilic and hydrophobic adulterants in botanical dietary supplements.

Nanostructured aptamer-based sensing platform for highly sensitive recognition of myoglobin

A composite was prepared from PtSn nanoparticles and carbon nanotubes (PtSnNP/CNTs) and applied to the electrochemical determination of myoglobin (Mb). An Mb-aptamer was immobilized on a glassy carbon electrode (GCE), and hexcyanoferrate was used as an electrochemical probe. The PtSnNP/CNTs were synthesized by a microwave-aided ethylene glycol reduction method. Detection is based on electron transfer inhibition that is caused by the folding and conformational change of the Mb-aptamer in the presence of Mb. The amperometric signal for hexacyanoferrate, best measured at 0.2 V vs. Ag/AgCl depends on the concentration of Mb that interacts with the aptamer on the GCE. This approach is selective and sensitive for Mb due to (a) the highly specific recognition ability of the aptamer for Mb, (b) the powerful electronic properties of carbon nanotubes, (c) the arranged decoration of CNTs with PtSnNPs, and (d), the superior electron transfer to hexacyanoferrate. The assay is highly selective, with linear relationships from 0.01-1 nM and 10 nM-200 nM, and a limit of detection as low as 2.2 ± 0.1 pM. The modified GCE was applied to the quantitation of Mb in spiked human serum samples. Graphical abstract Schematic illustration of the method for Mb detection.