A composite prepared from a metal-organic framework of type MIL-101(Fe) and morin-modified magnetite nanoparticles for extraction and speciation of vanadium(IV) and vanadium(V)

A molecular extraction process for vanadium based on tandem selective complexation and precipitation

Recycling vanadium from alternative sources is essential due to its expanding demand, depletion in natural sources, and environmental issues with terrestrial mining. Here, we present a complexation-precipitation method to selectively recover pentavalent vanadium ions, V(V), from complex metal ion mixtures, using an acid-stable metal binding agent, the cyclic imidedioxime, naphthalimidedioxime (H2CIDIII). H2CIDIII showed high extraction capacity and fast binding towards V(V) with crystal structures showing a 1:1 M:L dimer, [V2(O)3(C12H6N3O2)2]2-, 1, and 1:2 M:L non-oxido, [V(C12H6N3O2)2] ̶ complex, 2. Complexation selectivity studies showed only 1 and 2 were anionic, allowing facile separation of the V(V) complexes by pH-controlled precipitation, removing the need for solid support. The tandem complexation-precipitation technique achieved high recovery selectivity for V(V) with a selectivity coefficient above 3 × 105 from synthetic mixed metal solutions and real oil sand tailings. Zebrafish toxicity assay confirmed the non-toxicity of 1 and 2, highlighting H2CIDIII's potential for practical and large-scale V(V) recovery.

Polymeric Materials in Speciation Analysis Based on Solid-Phase Extraction

Speciation analysis is a relevant topic since the (eco)toxicity, bioavailability, bio (geo)chemical cycles, and mobility of a given element depend on its chemical forms (oxidation state, organic ligands, etc.). The reliability of analytical results for chemical species of elements depends mostly on the maintaining of their stability during the sample pretreatment step and on the selectivity of further separation step. Solid-phase extraction (SPE) is a matter of choice as the most suitable and widely used procedure for both enrichment of chemical species of elements and their separation. The features of sorbent material are of great importance to ensure extraction efficiency from one side and selectivity from the other side of the SPE procedure. This review presents an update on the application of polymeric materials in solid-phase extraction used in nonchromatographic methods for speciation analysis.

Superior Removal of Vanadium(V) from Simulated Groundwater with a Fe-Based Metal-Organic Framework Immobilized on Cotton Fibers

A suitable adsorbent is essential in the process of removing hazardous vanadium(V) from actual groundwater. In this work, MIL-88A(Fe)/cotton (MC) was employed to eliminate V(V) from simulated vanadium-contaminated groundwater. The findings demonstrated that MC exhibited an exceptional performance in removing V(V), displaying a maximum adsorption capacity of 218.71 mg g-1. MC exhibits great promise as an adsorbent for V(V) elimination in an extensive pH range spanning 3 to 11. Even in the presence of high levels of competing ions such as Cl-, NO3-, and SO42-, MC demonstrated remarkable specificity in adsorbing V(V). The results of column experiments and co-occurring ions influence tests indicate that MC is a potential candidate for effectively treating actual vanadium-contaminated groundwater. The effluent could meet the vanadium content restriction of 50 μg L-1 required in China's drinking water sources. Regeneration of MC can be performed easily without experiencing significant capacity loss. The results obtained from this research indicate the promising potential of MC in mitigating vanadium pollution.

Applications of magnetic and electromagnetic forces in micro-analytical systems

Novel applications of magnetic fields in analytical chemistry have become a remarkable trend in the last two decades. Various magnetic forces have been employed for the migration, orientation, manipulation, and trapping of microparticles, and new analytical platforms for separating and detecting molecules have been proposed. Magnetic materials such as functional magnetic nanoparticles, magnetic nanocomposites, and specially designed magnetic solids and liquids have also been developed for analytical purposes. Numerous attractive applications of magnetic and electromagnetic forces on magnetic and non-magnetic materials have been studied, but fundamental studies to understand the working principles of magnetic forces have been challenging. These studies will form a new field of magneto-analytical science, which should be developed as an interdisciplinary field. In this review, essential pioneering works and recent attractive developments are presented.

Magnetite Metal-Organic Frameworks: Applications in Environmental Remediation of Heavy Metals, Organic Contaminants, and Other Pollutants

Due to the increasing environmental pollution caused by human activities, environmental remediation has become an important subject for humans and environmental safety. The quest for beneficial pathways to remove organic and inorganic contaminants has been the theme of considerable investigations in the past decade. The easy and quick separation made magnetic solid-phase extraction (MSPE) a popular method for the removal of different pollutants from the environment. Metal-organic frameworks (MOFs) are a class of porous materials best known for their ultrahigh porosity. Moreover, these materials can be easily modified with useful ligands and form various composites with varying characteristics, thus rendering them an ideal candidate as adsorbing agents for MSPE. Herein, research on MSPE, encompassing MOFs as sorbents and Fe₃O₄ as a magnetic component, is surveyed for environmental applications. Initially, assorted pollutants and their threats to human and environmental safety are introduced with a brief introduction to MOFs and MSPE. Subsequently, the deployment of magnetic MOFs (MMOFs) as sorbents for the removal of various organic and inorganic pollutants from the environment is deliberated, encompassing the outlooks and perspectives of this field.

Sulfonated calixarene modified Poly(methyl methacrylate) nanoparticles:A promising adsorbent for Removal of Vanadium Ions from aqueous media

The poly (methyl methacrylate) (PMMA)-based nanoparticle was synthesized by surfactant-free emulsion polymerization method and then post modified with Calixarene using (3-Aminopropyl)triethoxysilane organo-silane as a linker after OH-treatment. The prepared structure was applied for efficient adsorption of Vanadium ions in the aqueous solution after characterization by FT-IR, SEM, TEM, DLS, and EDX. Additional investigations discovered that the prepared adsorbent has a good capacity to adsorb vanadium ions. The effect of key experimental factors was studied to find the optimal point of adsorbent efficiency including the initial concentration of analyte, sorbent dosage, pH of the solution, contact time, and type/quantity of the eluents. It was specified, the maximum adsorption capacity for the synthesized nanoparticles was obtained about 322 mg g^-1. The adsorption mechanism was revealed that the model of Langmuir isotherm well-matched compared to the others due to the calculated equilibrium data. Besides, the kinetics of the adsorption process was fitted with pseudo-second-order. Eventually, the prepared adsorbent was successfully applied in vanadium adsorption from real water media.

Iron-based metal-organic framework: Synthesis, structure and current technologies for water reclamation with deep insight into framework integrity

Water is a supreme requirement for the existence of life, the contamination from the point and non-point sources are creating a great threat to the water ecosystem. Advance tools and techniques are required to restore the water quality and metal-organic framework (MOFs) with a tunable porous structure, striking physical and chemical properties are an excellent candidate for it. Fe-based MOFs, which developed rapidly in recent years, are foreseen as most promising to overcome the disadvantages of traditional water depolluting practices. Fe-MOFs with low toxicity and preferable stability possess excellent performance potential for almost all water remedying techniques in contrast to other MOF structures, especially visible light photocatalysis, Fenton, and Fenton-like heterogeneous catalysis. Fe-MOFs become essential tool for water treatment due to their high catalytic activity, abundant active site and pollutant-specific adsorption. However, the structural degradation under external chemical, photolytic, mechanical, and thermal stimuli is impeding Fe-MOFs from further improvement in activity and their commercialization. Understanding the shortcomings of structural integrity is crucial for large-scale synthesis and commercial implementation of Fe-MOFs-based water treatment techniques. Herein we summarize the synthesis, structure and recent advancements in water remediation methods using Fe-MOFs in particular more attention is paid for adsorption, heterogeneous catalysis and photocatalysis with clear insight into the mechanisms involved. For ease of analysis, the pollutants have been classified into two major classes; inorganic pollutants and organic pollutants. In this review, we present for the first time a detailed insight into the challenges in employing Fe-MOFs for water remediation due to structural instability.

Amine functionalized polyacrylonitrile fibers for the selective preconcentration of trace metals prior to their on-line determination by ICP-MS

Amine functionalized polyacrylonitrile fibers (PANFs) were prepared and applied for the simultaneous separation and preconcentration of V(v), As(iii), Sn(iv), Sb(iii) and Bi(ii) from environmental water samples in this paper. The functional PANFs were first prepared by nucleophilic substitution reaction between hydroxylamine hydrochloride and polyacrylonitrile fibers, and then the reactant obtained in the first step was subjected to a ring opening reaction with epichlorohydrin, followed by modification with triethylenetetramine (TETA). The structure of the final polymer fibers was analyzed by Fourier transform infrared spectroscopy (FT-IR), and the morphology was characterized by scanning electron microscopy (SEM). A home-made solid phase extraction (SPE) pretreatment column was filled with PANFs, and then online connected with inductively coupled plasma mass spectrometry (ICP-MS) for quantitative determination of metal ions. Under the optimized experimental conditions, the target metal ions were eluted rapidly and quantitatively using 0.3 mol L-1 HNO3 solution. Only with 30 mL sample solution, high enrichment factors of 120 were obtained for V(v), As(iii), Sn(iv) and Sb(iii), and 115 for Bi(ii), respectively. The detection limits achieved were low: 1.2, 0.9, 1.7, 1.5 and 2.3 ng L-1 for V(v), As(iii), Sn(iv), Sb(iii) and Bi(ii), respectively, and the relative standard deviations (RSDs) were below 3.0%. The advanced fiber materials prepared in this work have the advantages of low cost, environmental friendliness and high adsorption efficiency, and the on-line preconcentration method has greatly improved the analysis efficiency. Finally, the feasibility and accuracy of the method were validated by successfully analyzing Certified Reference Materials (CRMs) as well as lake, river and sea water samples.

A novel turn-on fluorescent sensor for the sensitive detection of glutathione via gold nanocluster preparation based on controllable ligand-induced etching

In this study, we report a facile one-pot chemical etching approach to simply and rapidly prepare gold nanoclusters capped with luminol (Lum-AuNCs) in an alkaline aqueous solution at room temperature. A series of characterization studies have been carried out to explore the morphology, the optical properties and chemical components of Lum-AuNCs. The average diameter of Lum-AuNCs is 1.8 ± 0.3 nm, exhibiting fluorescence near 510 nm upon excitation at 420 nm with a quantum yield of 14.29% and an average fluorescence lifetime of 9.47 ns. On the basis of the ligand-induced etching of glutathione (GSH) to the intermediate (luminol capped gold nanoparticles, abbreviated as Lum-AuNPs), a novel and simple method for the fluorescence determination of GSH has been established. The method displays a good linear response in the range of 0.05-300 μM toward GSH with a limit of detection of 35 nM. This detection strategy with high sensitivity and selectivity facilitates its practical application for the detection of GSH levels in cell extracts. The in vitro cell results illustrate that Lum-AuNCs have good cytocompatibility and can be used to readily differentiate normal cells and tumor cells.

Iodine-doped carbon dots with inherent peroxidase catalytic activity for photocatalytic antibacterial and wound disinfection

A new type of nitrogen-iodine co-doped carbon dot (N/I-CD) was synthesized by a one-step hydrothermal method with a fluorescence quantum yield of 37%. The prepared N/I-CDs exhibit peroxidase-like activity, can catalyze bio-safety levels of H2O2 to generate hydroxyl radicals (•OH) under visible light and enhance the level of reactive oxygen species (ROS) in bacteria cells. All in vitro experiments showed that the designed system has strong photocatalytic antibacterial activity against both E. coli and S. aureus bacteria. The light-induced antibacterial function of N/I-CDs was evaluated under the conditions of changing other experimental parameters. When the visible light irradiation time was extended to 60 min, the antibacterial efficiency of N/I-CDs (0.21 mg·mL-1) against S. aureus and E. coli reached 100% in the presence of exogenous H2O2 (0.07 mM). More importantly, wound disinfection in vivo demonstrates the high antibacterial efficiency, low toxicity and application potential of good biocompatibility due to the nanozyme activity of N/I-CDs.

Monodispersed mesoporous SiO2@metal-organic framework (MSN@MIL-101(Fe)) composites as sorbent for extraction and preconcentration of phytohormones prior to HPLC-DAD analysis

The monodispersed mesoporous SiO₂@metal-organic framework (MSN@MIL-101(Fe)) composites were prepared by grafting MSN-NH₂ onto MIL-101(Fe) particles with a solvothermal method. The adsorption ability of the composites was greatly improved compared to that of pristine MSNs or MIL-101(Fe) for phytohormones (Phys). The MSN@MIL-101(Fe) composites were characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, energy dispersive spectrometer, and mapping analysis. Using MSN@MIL-101(Fe) composites as sorbent, a dispersive solid-phase extraction procedure (dSPE) was developed to extract three endogenous Phys (abscisic acid (ABA), indole-3-aceticacid (IAA), and indole-3-butyric acid (IBA)) and two exogenous Phys (1-naphthylacetic acid (1-NAA) and 2-naphthylacetic acid (2-NAA)) prior to HPLC-DAD analysis. The experimental parameters including sample volume, sorbent amount, adsorption time, adsorption pH, desorption time, and desorption solvent on extraction efficiency were optimized and evaluated. Under optimized conditions, the working range of 0.08 to 0.45 ng mL^-1 with enrichment factors from 144 to 207 were achieved. The linear range is 0.75-200 ng mL^-1 for IAA, 0.20-200 ng mL^-1 for ABA, and 1.0-200 ng mL^-1 for IBA, 1-NAA, and 2-NAA. With MSN@MIL-101(Fe) as sorbent for extraction of Phys and determination by HPLC-DAD, two endogenous Phys (IAA and ABA) were detected from mung bean sprouts which were made in a laboratory, and the results were further confirmed by high-resolution mass spectrometry. The composites can be applied to extract other small molecules, which have similar chemical structures with Phys in biological, environmental, and food samples. Graphical abstract Schematic presentation of a dispersive solid-phase extraction using monodispersed mesoporous SiO₂@metal-organic framework composites (MSNs@MIL-101(Fe)) as the sorbent for extraction, clean-up, and preconcentration of phytohormones in mung bean sprouts prior to HPLC-DAD analysis.

Evolution of Environmentally Friendly Strategies for Metal Extraction

The demand for the recovery of valuable metals and the need to understand the impact of heavy metals in the environment on human and aquatic life has led to the development of new methods for the extraction, recovery, and analysis of metal ions. With special emphasis on environmentally friendly approaches, efforts have been made to consider strategies that minimize the use of organic solvents, apply micromethodology, limit waste, reduce costs, are safe, and utilize benign or reusable materials. This review discusses recent developments in liquid- and solid-phase extraction techniques. Liquid-based methods include advances in the application of aqueous two- and three-phase systems, liquid membranes, and cloud point extraction. Recent progress in exploiting new sorbent materials for solid-phase extraction (SPE), solid-phase microextraction (SPME), and bulk extractions will also be discussed.

Ultrasound-assisted dispersive magnetic solid phase extraction based on metal–organic framework/1-(2-pyridylazo)-2-naphthol modified magnetite nanoparticle composites for speciation analysis of inorganic tin

A novel magnetic metal–organic framework (MMOF) consisting of MIL-101(Cr) and 1-(2-pyridylazo)-2-naphthol-modified magnetite nanoparticles was synthesized and utilized for the ultrasound-assisted magnetic solid phase extraction and speciation analysis of Sn(ii) and Sn(iv) at trace amounts.