Nitrogen-doped carbon dots with high quantum yield for colorimetric and fluorometric detection of ferric ions and in a fluorescent ink

Fluorescent Sodium Alginate Hydrogel-Carbon Dots Sensor for Detecting Perfluorooctanoic Acid in Potable Water

Per- and polyfluoroalkyl substances (PFASs), especially perfluorooctanoic acid (PFOA), are emerging environmental and health concerns due to their persistence, resistance to degradation, and bioaccumulation. In this study, we developed a sensitive and selective detection platform based on a sodium alginate (SA) hydrogel modified with nitrogen and fluorinated carbon dots (N,F-CDs) to enhance the detection of PFOA in natural and engineered water systems. The SA hydrogel-N,F-CD composite exhibited strong fluorescence at 480 nm after optimization, achieving a detection limit as low as 0.001 ppt. The sensor was characterized by using Scanning Electron Microscopy (SEM), Fourier-Transform Infrared Spectroscopy (FT-IR), Powder X-ray Diffraction (PXRD), X-ray Photoelectron Spectroscopy (XPS), and zeta potential spectroscopy, revealing its structural integrity, functional groups, and the surface charge of the SA hydrogel-N,F-CDs network. Sensitivity assessments demonstrated a linear fluorescence response to PFOA concentrations ranging from 1 to 66 ppq. Selectivity tests confirmed the sensor's ability to distinguish PFOA from other perfluorinated compounds, with minimal interference from other substances. The practical applicability of the sensor was validated using spiked recovery experiments with tap water samples from various locations, achieving recovery rates between 94% and 106.6%. This sensor offers a reliable, efficient, and highly sensitive platform for the detection of PFAS, demonstrating its potential for real-world PFAS-monitoring applications.

An Ultra-low Detection Limit Fe3+ Optical Fiber Fluorescent Sensor Based on a Anti-B18H22 Derivative with Aggregation-induced Emission Enhancement

A fluorescent Fe3+ probe ((C10H7NO2)2B18H20, M1) by introducing two isoquinoline-1-carboxylic acid group into the 6,9-position of anti-B18H22 was designed and synthesized. The structure of M1 was investigated by 1H NMR, MS, FT-IR and theoretical calculation, and its optical properties were characterized with UV-Vis and PL. M1 showed aggregation induced emission enhancement (AIEE) properties in THF/H2O solution, and exhibited an excellent selectivity toward Fe3+ in THF/H2O (v/v, ƒw = 95%) solution with a detection limit of 1.93 × 10-5 M. The interaction mechanism of probe for detecting Fe3+ is attributed to the involvement of intramolecular charge transfer (ICT) process. Furthermore, a optical fiber fluorescent Fe3+ sensor based on M1 sensing film was developed, the detection limit of the optical fiber Fe3+ fluorescent sensor could be improved to13.8 pM, the ultra-low detection limit is superior to most reported fluorescent probes (or sensors) towards Fe3+. This method has the advantages of high sensitivity, anti-interference and easy to operate, and has great potential in the field of the analysis of environmental and biological samples.

Highly Green Fluorescent Carbon Dots from Gallic Acid: A Turn-On Sensor toward Pb2+ Ions

Carbon dots (CDs) are emerging novel fluorescent sensing nanomaterials owing to their tunable optical properties, biocompatibility, and eco-friendliness. Herein, we report a facile one-pot hydrothermal route for the synthesis of highly green fluorescent CDs using gallic acid (GA) as a single carbon source in N,N-dimethylformamide (DMF) solvent, which serves as a nitrogen source and reaction medium. The optical properties of the synthesized GA-DMF CDs were systematically characterized by using UV-vis and photoluminescence spectroscopy, revealing strong green fluorescence. Further, to gain insights into their size and structural, elemental, and chemical composition, Fourier transform infrared, dynamic light scattering, high-resolution transmission electron microscopy (HR-TEM), X-ray diffraction, and X-ray photoelectron spectroscopy characterization techniques were performed. HR-TEM analysis confirmed the formation of uniformly spherical GA-DMF CDs with an average particle size of 16 ± 6.1 nm. Notably, the GA-DMF CDs exhibited a highly selective and turn-on fluorescent response to Pb2+ ions in aqueous solutions, which was attributed to a chelation-enhanced fluorescence mechanism. The detection limit for Pb2+ ions was determined to be as low as 7.15 × 10-7 M, with a broad linear detection range of 30-130 μM, underscoring their sensitivity and practical application in water quality monitoring. This study introduces a novel, sustainable approach for synthesizing nitrogen-doped CDs with outstanding optical properties and highlights their unprecedented selectivity toward Pb2+ ions, advancing the development of efficient and eco-friendly sensing platforms for heavy metal detection.

Visual tracking of real-time freshness of fish using an agar hydrogel colorimetric indicator containing CuNPs/NCQDs

A simple, selective, and affordable dual fluorescence-colorimetric indicator for hydrogen sulfide was developed based on a complex of copper nanoparticles and N-doped carbon quantum dots (CuNPs/NCQDs). Real-time and visual freshness tracking of fish was done using a colorimetric indicator by incorporating CuNPs/NCQDs into agar hydrogel (AH-CuNPs/NCQDs). The fluorescence response of the CuNPs/NCQDs solution is quenched upon exposure to H2S. The field-emission scanning electron microscopy image of the AH-CuNPs/NCQDs film revealed a unified structure. The prepared indicator exhibited a good and irreversible response to H2S, with a LOD of 91.36 and a LOQ of 276.86 μM, based on the localized surface plasmon resonance (LSPR) mechanism. The X-ray photoelectron spectrometer and Fourier transform infrared spectrometer results confirmed the formation of a CuS bond in the colorimetric indicator exposed to fish spoilage. The prepared indicator demonstrated good stability and remained unaffected by pH or other volatile compounds. Notably, there was a strong correlation between ΔΕ and fish freshness parameters (pH, TV-BN, and TVC). Light green, pale yellow, and dark yellow colors, respectively, indicated freshness, semi-freshness, and spoilage of fish during storage in the refrigerator. Overall, the prepared indicator can be effectively used for detecting spoilage in meat products as a highly sensitive freshness indicator.

Clozapine-laden carbon dots delivered to the brain via an intranasal pathway: Synthesis, characterization, ex vivo, and in vivo studies

Clozapine, which is widely used to treat schizophrenia, shows low bioavailability due to poor solubility and high first-pass metabolism. The study aimed to design clozapine-loaded carbon dots (CDs) to enhance availability of the clozapine to the brain via intranasal pathway. The CDs were synthesized by pyrolysis of citric acid and urea at 200 °C by hydrothermal technique and characterized by photoluminescence, transmission electron microscopy (TEM), X-ray Photoelectron Spectrometer (XPS), and Fourier transform infrared spectrum (FTIR). The optimized clozapine-loaded CDs (CLZ-CDs-1:3-200) showed a quasi-spherical shape (9-12 nm) with stable blue fluorescence. The CDs showed high drug solubilization capacity (1.5 mg drug in 1 mg/ml CDs) with strong electrostatic interaction with clozapine (drug loading efficiency = 94.74%). The ex vivo release study performed using nasal goat mucosa showed sustained release of clozapine (43.89%) from CLZ-CDs-1:3-200 for 30 h. The ciliotoxicity study (histopathology) confirmed no toxicity to the nasal mucosal tissues using CDs. In the rat model (in vivo pharmacokinetic study), when CDs were administrated by the intranasal route, a significantly higher concentration of clozapine in the brain tissue (Cmax = 58.07 ± 5.36 μg/g and AUCt (µg/h*g) = 105.76 ± 12.31) was noted within a short time (tmax = 1 h) compared to clozapine suspension administered by intravenous route (Cmax = 20.99 ± 3.91 μg/g, AUC t (µg/h*g) = 56.89 ± 12.31, and tmax = 4 h). The high value of drug targeting efficiency (DTE, 486%) index and direct transport percentage (DTP, 58%) indicates the direct entry of clozapine-CDs in the brain via the olfactory route. In conclusion, designed CDs demonstrated a promising dosage form for targeted nose-to-brain delivery of clozapine for the effective treatment of schizophrenia.

Multi-component determination based on high quantum yield "on-off-on" carbon quantum dots sensor

The nitrogen(N)-sulfur(S)-sodium(Na(I)) co-doped carbon quantum dots (CQDs) were synthesized via a one-step hydrothermal method, which exhibited a remarkably high fluorescence quantum yield (24.58%) and exceptional optical properties. The fluorescence "on-off-on" sensor was constructed. The fluorescence of CQDs was rapidly quenched with Fe(III) and the fluorescence recovered by ascorbic acid (Asc) partially and arginine (Arg)/histidine (His) completely. The CQDs fluorescence sensor demonstrated rapid response, exceptional sensitivity, excellent stability, remarkable selectivity, and robust anti-interference performance, which was feasible to simultaneously determine the concentrations of multiple analytes in the sample with satisfactory recovery rates. The "on-off-on" fluorescence mechanism of CQDs was investigated, revealing the significant potential of carbon nano-functionalized materials in the field of drug detection through fluorescence sensing.

Efficient delivery of methotrexate to MDA-MB-231 breast cancer cells by a pH-responsive ZnO nanocarrier

Methotrexate (MTX), an efficient chemotherapy medication is used in treating various malignancies. However, the breast cancer cell line MDA-MB-231 has developed resistance to it due to low levels of the MTX transport protein, and reduced folate carrier (RFC), making it less effective against these cancer cells. Here we designed a very simple, biocompatible, and non-toxic amine-capped ZnO quantum dots to overcome the MTX resistance on the MDA-MB-231 breast cancer cell line. The QD was characterized by HRTEM, DLS EDX, FT-IR, UV-Vis, and Fluorescence spectroscopy. MTX loading onto the QD was confirmed through fluorescence and UV-Vis spectroscopy. Additionally, extensive confocal microscopic investigations were carried out to determine whether the MTX was successfully released on the MDA-MB-231 cell line. It was discovered that QD is a better pH-responsive delivery system than the previous ones because it successfully delivers MTX to the MDA-MB-231 at a higher rate on an acidic pH than it does at a physiological pH. QD also has anticancer activity and can eradicate cancer cells on its own. These factors make the QD to be an effective pH-responsive delivery system that can improve the efficacy of the medication in therapeutic diagnosis.

Semiquantitative and visual detection of ferric ions in real samples using a fluorescent paper-based analytical device constructed with green emitting carbon dots

A simple and portable paper-based analytical device was developed for visual and semiquantitative detection of ferric ion in real samples using green emitting carbon dots (CDs), which were prepared via microwave method using sodium citrate, urea and sodium hydroxide as raw materials and then loaded on the surface of paper substrate. When Fe3+ exists, the green fluorescence of CDs was quenched and significant color change from green to dark blue were observed, resulting the visual detection of Fe3+ with a minimum distinguishable concentration of 100 μM. By analyzing the intensity changes of green channels of test paper with the help of smartphone, the semiquantitative detection was realized within the range of 100 μM to 1200 μM. The proposed paper-based analytical devices have great application prospects in on site detection of Fe3+ in real samples.

Investigation of the role of pH and the stoichiometry of the N-dopant in the luminescence, composition and synthesis yield of carbon dots

Carbon dots (CDs) are carbon-based nanoparticles with very attractive luminescence features, which simplicity and flexibility of their fabrication can lead to an endless number of CDs with distinct properties and applications. High fluorescence quantum yields (QY_FL) are generally a necessary feature for various applications of CDs. One commonly employed strategy to improve the fluorescence properties of CDs is heteroatom-doping using precursors containing desired heteroatoms (with focus on N-doping). In this work, we report the synthesis and systematic investigation of an array of N-doped CDs, obtained from the dry heating of solid mixtures of glucose and urea in different molar ratios with two main objectives: to study the role of stoichiometry in the optical properties and composition of CDs and to investigate the formation of possible alkaline-responsive nanoparticles and the potential of this procedure for obtaining CDs with higher synthesis yields. We have characterized the optical properties of this diverse array of glucose and urea-based CDs using both UV-Vis and fluorescence spectroscopies. In addition, we have also examined the CDs by using high-resolution transmission electron microscopy (HR-TEM) and X-Ray photoelectron (XPS) spectroscopy, as well as by assessing the thermal stability of the nanoparticles. We have found that this fabrication process generates two types of CDs, one readily soluble in water and other only soluble at basic pH. The latter was characterized by higher synthesis yields, and lower QY_FL and thermal stability, when compared with those of the former. Furthermore, the stoichiometry of the N-dopant does not appear to be correlated with the QY_FL of the obtained CDs. This study provides novel information that should be useful for the future rational development of CDs with higher QY_FL and synthesis yields.

Optical Properties of Tricarboxylic Acid-Derived Carbon Dots

Herein, we report the characterization of two types of luminescent carbon dots (CDs) synthesized by the hydrothermal treatment of citric acid and trans-aconitic acid by using ammonia solution as a nitrogen dopant. The lateral size range of nanoparticles for CDs lies in the range of 3-15 nm. The intense blue photoluminescence (PL) was emitted by the CDs at around 409-435 nm under the excitation of 320 nm. The PL quantum yield of the synthesized CDs ranged from 26.4 to 51%. Our results of the structural and optical properties of CDs imply that molecular fluorophores are an important part of the structure; in particular, the main contribution to the PL is carried by the fluorophores based on citrazinic acid derivatives, which formed during the synthesis of CDs.

One step synthesis of ultra-high quantum yield fluorescent carbon dots for "on-off-on" detection of Hg2+ and biothiols

In this paper, the carbon dots (CDs) with strong blue fluorescence were synthesized through hydrothermal method, which using folic acid, ammonium citrate and ethylenediamine as precursors. The prepared CDs with a high absolute quantum yield of 81.94% and showed excellent stability in high concentration salt solution and different pH conditions. With the addition of Hg²⁺, the signal of CDs was selectively quenched. At the same time, the CDs-Hg²⁺ system could be recovered after the introduction of biothiols. Moreover, the fluorescence of CDs showed a good linear relationship with Hg²⁺ (1-15 µM), and the detection limit as low as 0.08 µM. In addition, the prepared CDs with low toxicity could be used to detect Hg²⁺ in living cells and actual water samples.

Carbon dots for multicolor cell imaging and ultra-sensitive detection of multiple ions in living cells: One Stone for multiple Birds

Given the significant impact of ions on environment pollution and human health, it is urgently needed to establish effective and convenient ion detection approaches, particularly in living cells. In this paper, we constructed multicolor N-doped-carbon dots (mPD-CDs) by facile one-step hydrothermal carbonization of m-phenylenediamine (mPD). mPD-CDs were successfully deployed for multicolor cellular imaging for animal cells, fungi, and bacteria in a wash-free way with high photostability and satisfactory biocompability. Moreover, mPD-CDs can be used as a fluorescent sensing probe for ultrasensitive detection of both iodide ion (I^-) and typical heavy metals such as cadmium (Cd²⁺), copper (Cu²⁺), mercury (Hg²⁺), gadolinium (Gd³⁺), ferrous ion (Fe²⁺), Zinc (Zn²⁺), and ferric ion (Fe³⁺). This is the first report using CDs as optical sensing probe for the detection of Gd³⁺, and for detection of Fe³⁺ with fluorescence "turn on". More significantly, with these versatile and fascinating properties, we applied mPD-CDs for intracellular ion detection in living cells like Hep G2 and S. cerevisiae, and zebra fish. Altogether, mPD-CDs displayed great potential for multicolor cell imaging and the multiple ion detection in vitro and in vivo, presenting a promising strategy for in-situ ultrasensitive sensing of multiple metal ions in the environment and the biological systems.

Pyrolysis and Solvothermal Synthesis for Carbon Dots: Role of Purification and Molecular Fluorophores

Over the last decade, the interest in carbon dots, graphene dots, or similar carbon-based nanoparticles has increased considerably. This interest is based on potentially high fluorescent quantum yields, controllable excitation-dependent emission, low toxicity, and convenient reaction conditions. Carbon dots are often seen as a promising alternative to classical semiconductor quantum dots that are typically made from toxic semiconductor materials. Surprisingly, aspects like the atomic structure, composition, mechanism of formation, and precise understanding of the photophysical properties of carbon dots are still mostly unknown. The large number of different precursor systems and the variety in synthesis routes make a direct comparison of different systems difficult. To advance this, we went for a systematic approach and compared the results of four synthesis routes using two different precursor systems. We used different spectroscopy and microscopy methods including fluorescence correlation spectroscopy to characterize the different reaction products. We found that for syntheses solely based on citric acid as the precursor, we obtain particles where the emission wavelength is strongly dependent on the excitation wavelength despite relatively low quantum yields. In comparison, when urea is added as a nitrogen doping reactant, we observe vastly increased quantum yields. By making use of a combination of dialysis and column chromatography, we were able to isolate various luminescent species with high quantum yields and verify the existence of different molecular fluorophores. A detailed and consistent characterization of the reaction products during the course of purification revealed strong interactions between molecular fluorophores and larger reaction products.

Carbon Dots: An Excellent Fluorescent Probe for Contaminant Sensing and Remediation

Pollution-induced degradation of the environment is a serious problem for both developing and developed countries. Existing remediation methods are restricted, necessitating the development of novel remediation technologies. Nanomaterials with unique characteristics have recently been developed for remediation. Quantum dots (QDs) are semiconductor nanoparticles (1-10 nm) with optical and electrical characteristics that differ from bigger particles owing to quantum mechanics, making them intriguing for sensing and remediation applications. Carbon dots (CDs) offer better characteristics than typical QDs, such as, CdSe QDs in terms of contaminant sensing and remediation. Non-toxicity, chemical inertness, photo-induced electron transfer, good biocompatibility, and adjustable photoluminescence behavior are all characteristics of CDs. CDs are frequently made from sustainable raw materials as they are cost-effective, environmentally compactable, and excellent in reducing waste generation. The goal of this review article is to briefly describe CDs fabrication methods, to deeply investigate the criteria and properties of CDs that make them suitable for sensing and remediation of contaminants, and also to highlight recent advances in their use in sensing and remediation of contaminants.

Reuse of waste Myrica rubra for green synthesis of nitrogen-doped carbon dots as an "on-off-on" fluorescent probe for Fe3+ and ascorbic acid detection

As one kind of high nutrition fruits, abandoned Myrica rubra causes great waste due to short storage period. For resource utilization, we herein fabricated the Myrica rubra-based N-doped carbon dots (MN-CDs) by a facile/green hydrothermal method. MN-CDs, fabricated from four regions of China, displayed significant differences in their corresponding fluorescence intensities (FIs). Interestingly, different batches of waxberry samples from the same region (Wenzhou, China) exhibited slight differences in their FIs, and also an excellent anti-photobleaching and anti-salt capacity. Based on Fe³⁺-triggered quenching effect and fluorescent recovery by redox reaction of AA and Fe³⁺, MN-CDs were employed to construct an "on-off-on" switch probe for sequential detection of Fe³⁺ and ascorbic acid (AA). Through Zeta potential, UV spectrum, Stern-Volmer equation, and valence-conduction band theory, the Fe³⁺-triggered quenching belonged to a static quenching process, which resulted from the synergistic contribution of inner filtering effect and photo-induced electron transfer mechanisms. The linear ranges for Fe³⁺ and AA detections were 1-1000 and 0.1-1000 mM. The limits of detection were 0.3 μM for Fe³⁺ in environmental waters, and 0.03 μM for AA in pharmaceutical tablets and fruit juice samples. Under 365-nm UV lamp, the color changes of test papers were easily observed from dark blue and bright blue in the presence of Fe³⁺ and AA, and thus the MN-CDs-based switch probe could be satisfactorily used for visually qualitative detection of Fe³⁺ and AA outdoor with our naked eyes. To sum up, MN-CDs not only realize resource reutilization of abandoned Myrica rubra, but also offer an convenient outdoor approach for qualitative detection of Fe³⁺ and AA in complex matrices.

Fabrication of fluorescence sensor based on molecularly imprinted polymer on amine-modified carbon quantum dots for fast and highly sensitive and selective detection of tannic acid in food samples

Developing a rapid and accurate method for tannic acid (TA) detection and measurement is necessary due to its extensive applications in the food industry. In this work, a fluorescence sensor with a low limit of detection was synthesized for TA for the first time. First, amine-modified carbon quantum dots (a-CQDs) with high-quantum yield were synthesized by the hydrothermal method. A layer of molecularly imprinted polymer (MIP) was then placed on a-CQDs by the surface printing method to increase the sensor selectivity. The mechanism of TA detection by the prepared a-CQDs/MIPs was quenching the fluorescence intensity of a-CQDs in the presence of TA due to the transfer of electrons from the TA to the a-CQDs. The linear range of the sensor response was at the TA concentration of 1-200 nmol L^-1 and its detection limit was 0.6 nmol L^-1 under optimal conditions. Finally, the sensor was used to measure TA in grape juice, green tea, and black tea samples using the recovery method. Recovery values between 97.4 and 103.6% and RSDs less than 3.8% indicated the high potential of the prepared sensor for TA analysis in complex food samples.

Highly Fluorescent Carbon Dots as a Potential Fluorescence Probe for Selective Sensing of Ferric Ions in Aqueous Solution

This paper’s emphasis is on the development of a fluorescent chemosensor for Fe3+ ions in an aqueous solution, using hydrophilic carbon dots (O-CDs). A simple, cost-effective, and environmentally friendly one-step hydrothermal synthesis method was used to synthesize fluorescent hydrophilic O-CDs from Oxalis corniculata (Family; Oxalidaceae). The graphitic structure and size distribution of the O-CDs was verified by X-ray diffraction, Raman spectroscopy, and high-resolution transmission electron microscopy studies. The resulting O-CDs had a near-spherical shape and an adequate degree of graphitization at the core, with an average diameter of 4.5 nm. X-ray photoelectron and Fourier transform infrared spectroscopy methods revealed the presence of several hydrophilic groups (carbonyl, amine, carboxyl, and hydroxyl, along with nitrogen and oxygen-rich molecules) on the surface of O-CDs. The synthesized hydrophilic O-CDs with excitation wavelength-dependent emission fluorescence characteristics showed a high quantum yield of about 20%. Besides this, the hydrophilic O-CDs exhibited a bright and controllable fluorescence with prolonged stability and photo-stability. These fluorescent hydrophilic O-CDs were used as a nanoprobe for the fluorometric identification of Fe3+ ions in an aqueous solution, with high sensitivity and selectivity. By quenching the blue emission fluorescence of this nanosensor, a highly sensitive Fe3+ ion in the range of 10–50 µM with a minimum detection limit of 0.73 µM was achieved. In addition, the developed nanosensor can be used to sense intracellular Fe3+ ions with high biocompatibility and cellular imaging capacity, and it has a lot of potential in biomedical applications.

A fluorescence biosensor based on single-stranded DNA and carbon quantum dots for acrylamide detection

As a potential carcinogen produced in food thermal processing, acrylamide (AM) can cause irreversible harm to human health. For the detection of AM in food products, a simple fluorescent biosensor based on single-stranded DNA (ssDNA) and carbon quantum dots (CQDs) was developed. Reduced fluorescence intensity of CQDs at 445 nm (excitation at 350 nm) was induced by the attachment of ssDNA. In the presence of AM, ssDNA was preferentially bound to AM by hydrogen bonding and the degree of fluorescence reduction was smaller than that without AM. Under optimized conditions, results showed that the sensing approach for detecting AM had a low detection limit of 2.41 × 10^-8 M in the standard solution, and a linear relationship ranging from 5 × 10^-3 to 1 × 10^-7 M with the determination coefficient (R²) of 0.9895 was obtained. Furthermore, a good recovery percentage (91.36-98.11%) in bread crust showed the potential for practical applications of this proposed biosensor.

Absorption and emission of light in red emissive carbon nanodots

The structure–function relationship, especially the origin of absorption and emission of light in carbon nanodots (CNDs), has baffled scientists. The multilevel complexity arises due to the large number of by-products synthesized during the bottom-up approach. By performing systematic purification and characterization, we reveal the presence of a molecular fluorophore, quinoxalino[2,3-b]phenazine-2,3-diamine (QXPDA), in a large amount (∼80% of the total mass) in red emissive CNDs synthesized from o-phenylenediamine (OPDA), which is one of the well-known precursor molecules used for CND synthesis. The recorded NMR and mass spectra tentatively confirm the structure of QXPDA. The close resemblance of the experimental vibronic progression and the mirror symmetry of the absorption and emission spectra with the theoretically simulated spectra confirm an extended conjugated structure of QXPDA. Interestingly, QXPDA dictates the complete emission characteristics of the CNDs; in particular, it showed a striking similarity of its excitation independent emission spectra with that of the original synthesized red emissive CND solution. On the other hand, the CND like structure with a typical size of ∼4 nm was observed under a transmission electron microscope for a blue emissive species, which showed both excitation dependent and independent emission spectra. Interestingly, Raman spectroscopic data showed the similarity between QXPDA and the dot structure thus suggesting the formation of the QXPDA aggregated core structure in CNDs. We further demonstrated the parallelism in trends of absorption and emission of light from a few other red emissive CNDs, which were synthesized using different experimental conditions.

Herein we unveil the presence of a molecular fluorophore quinoxalino[2,3-b]phenazine-2,3-diamine (QXPDA) in a colossal amount in red emissive CNDs synthesized from o-phenylenediamine, a well-known precursor molecule used for CND synthesis.

Carbon dots as naked eye sensors

Optical sensors are always fascinating for chemists due to their selectivity, sensitivity, robustness and cost-effective nature.

Orange red-emitting carbon dots for enhanced colorimetric detection of Fe3+

Orange red-emitting CDs were constructed from 2,3-diaminopyridine and successfully used for visual colorimetry and near-infrared cellular imaging.

Dansyl-modified carbon dots with dual-emission for pH sensing, Fe3+ ion detection and fluorescent ink

In this work, a multifunctional ratiometric fluorescence (FL) nanohybrid (CSCDs@DC) was synthesized from chitosan based carbon dots (CSCDs) and dansyl chloride (DC) at room temperature. The CSCDs@DC revealed strong FL intensity, great stability and excellent anti-photobleaching properties. Herein, CSCDs@DC was responsive to pH value in the range of 1.5-4.0 and exhibited color-switchable FL properties between acidic and alkaline environments. In addition, CSCDs@DC showed good selectivity and sensitivity towards Fe³⁺ ions. A good linear relationship for the Fe³⁺ ion detection was obtained in the range from 0 μM to 100 μM, with a detection limit of 1.23 μM. What's more, CSCDs@DC can be used as a fluorescent ink. It expressed superior optical properties after 3 months of storage or continuous exposure to UV light for 24 h. This study suggested that CSCDs@DC had potential in the detection of pH and metal ions, as well as showing promising application in the anti-counterfeiting field.

Preparation of 1, 3, 6, 8-Pyrenesulfonic Acid Tetrasodium Salt Dye-Doped Silica Nanoparticles and Their Application in Water-Based Anti-Counterfeit Ink

In order to improve the luminescent stability of water-based anti-counterfeit ink, a new fluorescent material is prepared by doping dye into silica nanoparticles. Water soluble anionic dye 1, 3, 6, 8-pyrenesulfonic acid sodium salt (PTSA) is selected as the dopant. In this work, PTSA is successfully trapped into silica nanoparticles (SiNPs) by the reverse microemulsion method using cationic polyelectrolyte poly (dimethyl diallyl ammonium chloride; PDADMAC) as a bridge. The UV absorption spectra, fluorescence emission spectra and fluorescent decay curves are used to describe the luminescent properties of the PTSA-doped silica nanoparticles (PTSA-SiNPs). In addition, the as-prepared PTSA-SiNPs and polyurethane waterborne emulsion are used to prepare water-based anti-counterfeit ink, and fluorescent patterns are successfully printed through screen-printing. The samples printed by the ink exhibit desirable fluorescence properties, heat stability, robust photostability, and a fluorescent anti-counterfeit effect, which makes the PTSA-SiNPs promising luminescent materials for anti-counterfeit applications.

Evaluation of Different Bottom-up Routes for the Fabrication of Carbon Dots

Carbon dots (CDs) are carbon-based nanoparticles with very attractive luminescence features. Furthermore, their synthesis by bottom-up strategies is quite flexible, as tuning the reaction precursors and synthesis procedures can lead to an endless number of CDs with distinct properties and applications. However, this complex variability has made the characterization of the structural and optical properties of the nanomaterials difficult. Herein, we performed a systematic evaluation of the effect of three representative bottom-up strategies (hydrothermal, microwave-assisted, and calcination) on the properties of CDs prepared from the same precursors (citric acid and urea). Our results revealed that these synthesis routes led to nanoparticles with similar sizes, identical excitation-dependent blue-to-green emission, and similar surface-functionalization. However, we have also found that microwave and calcination strategies are more efficient towards nitrogen-doping than hydrothermal synthesis, and thus, the former routes are able to generate CDs with significantly higher fluorescence quantum yields than the latter. Furthermore, the different synthesis strategies appear to have a role in the origin of the photoluminescence of the CDs, as hydrothermal-based nanoparticles present an emission more dependent on surface states, while microwave- and calcination-based CDs present an emission with more contributions from core states. Furthermore, calcination and microwave routes are more suitable for high-yield synthesis (~27-29%), while hydrothermal synthesis present almost negligible synthesis yields (~2%). Finally, life cycle assessment (LCA) was performed to investigate the sustainability of these processes and indicated microwave synthesis as the best choice for future studies.

Turning Spent Coffee Grounds into Sustainable Precursors for the Fabrication of Carbon Dots

Spent coffee grounds (SCGs) are known for containing many organic compounds of interest, including carbohydrates, lipids, phenolic compounds and proteins. Therefore, we investigated them as a potential source to obtain carbon dots (CDs) via a nanotechnology approach. Herein, a comparison was performed between CDs produced by SCGs and classic precursors (e.g., citric acid and urea). The SCG-based CDs were obtained via the one-pot and solvent-free carbonization of solid samples, generating nanosized particles (2.1-3.9 nm). These nanoparticles exhibited a blue fluorescence with moderate quantum yields (2.9-5.8%) and an excitation-dependent emission characteristic of carbon dots. SCG-based CDs showed potential as environmentally relevant fluorescent probes for Fe3+ in water. More importantly, life cycle assessment studies validated the production of CDs from SCG samples as a more environmentally sustainable route, as compared to those using classic reported precursors, when considering either a weight- or a function-based functional unit.

Tunable multicolour S/N co-doped carbon quantum dots synthesized from waste foam and application to detection of Cr3+ ions

In this study, by adjusting sulfuric acid concentrations, tunable multicolour S/N-carbon quantum dots (CQDs) were synthesized from waste foam as the raw material. The S/N-CQDs presented blue, blue-green, green, green-yellow and yellow emission with an emission peak shifting from 475 to 589 nm and with optimum excitation wavelengths of 385, 405, 440, 450, and 500 nm, respectively. Using transmission electron microscopy, the S/N-CQDs were seen to be spherical in morphology with a size around 6-8 nm. Fourier transform infrared spectra and X-ray photoelectron spectroscopy indicated that the surface of the S/N-CQDs was highly oxidized and sulfur doped. The fluorescence mechanism of multicolour S/N-CQDs emission was mainly related to a band gap change caused by the surface state. Blue-emitting S/N-CQDs were used as a fluorescent probe that was highly selective and sensitive to Cr³⁺ ions, with a low detection limit of 6 μM. The waste foam-derived S/N-CQDs exhibited promising potential for ion detection in real water samples due to its excellent fluorescence activity.

Multicolor emissive sulfur, nitrogen co-doped carbon dots and their application in ion detection and solid lighting

Multicolor emissive carbon dots (CDs) have potential applications in many fields such as photoelectric display, light-emitting devices, and bioimaging. Such CDs by heteroatom doping of nitrogen elements assisted with various solvents has achieved recently, yet generally low efficiency in red-light region. Herein, we developed a facile route to synthesize multicolor-emissive CDs governed by a solvothermal method of tetrahydrofuran solvent. The maximum emission locates at 432, 510, and 584 nm with the absolute FL QYs up to 21.1%, 11.0%, and 55.4% for selected B-CDs, G-CDs, and YG-CDs, respectively. By means of the analysis on their PL spectra, fluorescence lifetimes, and microstructures, the different graphitic degrees and surface states formed under the participation of S and N elements in as-prepared CDs determine the fluorescent color, and large sp²-conjugated domains within the YR-CDs is closely related to high QY. They, likewise, endow the YR-CDs with high sensitivity for ion detections of Ag⁺ and Fe³⁺, which was further illustrated to have different quenching mechanisms each other due to the affinity interaction with different surface groups of the CDs. High PL QYs of these CDs emission are beneficial to application in solid lighting, phosphors dried by these CDs solutions were mixed with PVP water solution to fabricate CDs/PVP films. The films exhibited stable fluorescence, and three phosphors were also mixed together in proportion to obtain white-light film with a CIE coordinates of (0.34, 0.34), which demonstrates that these CDs are potentially fluorescent nanomaterial in the solid-state lighting field.

N-Doped carbon dots with pH-sensitive emission, and their application to simultaneous fluorometric determination of iron(III) and copper(II)

Simultaneous fluorometric determination of iron(III) and copper(II) without the use of any masking agent or additional treatment is achieved by using N-doped carbon dots (NCDs). The NCDs were hydrothermally prepared, have strongest excitation/emission peaks at 320/406 nm and a 47% quantum yield. Excitation-tunable emission is found to depend on solution pH values. This supports the involvement of surface states in the origin of the excitation dependent nature. The NCDs were employed as a fluorescent probe for the simultaneous determination of Fe(III) with a linear response in the 3-60 μM concentration range and a 0.31 μM detection limit (LOD). The probe also responds linearly to Cu(II) in the 0.5-15 μM concentration range and with a 56 nM LOD. With the addition of Cu(II), the absorption spectra of NCDs presented a clear decrease in the intensity at 312 nm followed by an increase at 360 nm. This is not observed in the presence of Fe(III). The fluorescence lifetime of NCDs (5.8 ns) is reduced by Fe(III) but not by Cu(II). Thus, the two metal ions can be simultaneously detected without the need for any reagents. The probe was employed to quantify Fe(III) and Cu(II) in spiked water, serum, and urine samples. Graphical abstract Schematic representation of hydrothermal synthesis of highly fluorescent N-doped carbon dots with novel pH dependent emission and their application for the simultaneous determination of Cu(II) and Fe(III) with individual ion discrimination.

High Quantum Yield Fluorescent Carbon Nanodots for detection of Fe (III) Ions and Electrochemical Study of Quenching Mechanism

Carbon nanodots (CNDs) offer potential applications in photocatalysis, optoelectronics, bio-imaging, and sensing due to their excellent photoluminescence (PL) properties, biocompatibility, aqueous solubility, and easy functionalization. Recent emphasis on CNDs in the selective detection of metal ions is due to the growing concern for human and environmental safety. In this work, two types of fluorescent carbon nanodots (CNDs) are synthesized economically from ethylene diamine (E-CNDs) or urea (U-CNDs) in a single step microwave process. The as-prepared CNDs exhibit excellent PL at an excitation wavelength of 350 nm with a quantum yield of 64% for E-CNDs and 8.4% for U-CNDs with reference to quinine sulfate. Both E-CNDs and U-CNDs demonstrate high selectivity towards Fe (III) ions among different metal ions, by fluorescence quenching in a dose dependent manner. The limit of detection of E-CNDs and U-CNDs is observed to be 18 nM and 30 nM, respectively, in the linear response range of 0-2000 μM with a short response time (seconds). The CNDs detect Fe (III) ions in tap water and serum sample with no spiking and the recovery was ~100% with the Fe (III) samples. Cellular internalization studies confirm the localization of the CNDs and the optical imaging sensing of Fe (III) ions inside living cells. A charge transfer fluorescence quenching mechanism, specifically between the CNDs and Fe (III), is proposed and examined using cyclic voltammetry. The overall characteristics of the E-CNDs provides a potential sensing platform in highly sensitive and selective detection of Fe (III) ions.

Carbon Dot-functionalized Interferometric Optical Fiber Sensor for Detection of Ferric Ions in Biological Samples

This work reports an interferometric optical microfiber sensor functionalized with nitrogen- and sulfur-codoped carbon dots (CDs) for the detection of ferric ions (Fe³⁺). Compared to other CD-based ferric ion sensors, the sensing mechanism of this presented sensor is dependent on the refractive index modulations due to selective Fe³⁺ adsorption onto the CD binding sites at the tapered region. This is the first study in which CD-based sensing was performed at the solid phase as a chelator, which does not rely on its fluorescence properties. The detection performance of the proposed sensor is not only comparable to a conventional fluorescence-based CD nanoprobe sensor but also capable of delivering quantitative analysis results and ease of translation to a sensor device for on-site detection. The presented sensor exhibits Fe³⁺ detection sensitivity of 0.0061 nm/(μg/L) in the linear detection range between 0 and 300 μg/L and a detection limit of 0.77 μg/L based on the Langmuir isotherm model. Finally, the potential use of the CD-functionalized optical microfiber sensor in the real environmental and biological Fe³⁺ monitoring applications has also been validated in this work.

The Fluorescent Quenching Mechanism of N and S Co-Doped Graphene Quantum Dots with Fe3+ and Hg2+ Ions and Their Application as a Novel Fluorescent Sensor

The fluorescence intensity of N, S co-doped graphene quantum dots (N, S-GQDs) can be quenched by Fe3+ and Hg2+. Density functional theory (DFT) simulation and experimental studies indicate that the fluorescence quenching mechanisms for Fe3+ and Hg2+ detection are mainly attributed to the inner filter effect (IFE) and dynamic quenching process, respectively. The electronegativity difference between C and doped atoms (N, S) in favor to introduce negative charge sites on the surface of N, S-GQDs leads to charge redistribution. Those negative charge sites facilitate the adsorption of cations on the N, S-GQDs' surface. Atomic population analysis results show that some charge transfer from Fe3+ and Hg2+ to N, S-GQDs, which relate to the fluorescent quenching of N, S-GQDs. In addition, negative adsorption energy indicates the adsorption of Hg2+ and Fe2+ is energetically favorable, which also contributes to the adsorption of quencher ions. Blue fluorescent N, S-GQDs were synthesized by a facile one-pot hydrothermal treatment. Fluorescent lifetime and UV-vis measurements further validate the fluorescent quenching mechanism is related to the electron transfer dynamic quenching and IFE quenching. The as-synthesized N, S-GQDs were applied as a fluorescent probe for Fe3+ and Hg2+ detection. Results indicate that N, S-GQDs have good sensitivity and selectivity on Fe3+ and Hg2+ with a detection limit as low as 2.88 and 0.27 nM, respectively.