Fluorescence determination of chloramphenicol in milk powder using carbon dot decorated silver metal-organic frameworks

Dual emission ratiometric fluorescence probe based on N-doped carbon dots and coumarin derivatives for determination of moxifloxacin and copper ion

BACKGROUND

Residues of moxifloxacin (MFX) and copper ions (Cu2+) can have detrimental health effects on humans. Thus, it is essential to develop a sensitive method for the detection of MFX and Cu2+. Fluorescence analysis is a potent technique, offering simplicity, speed, and efficiency. However, analytical results from single-emission fluorescence methods can be affected by environmental factors, probe inhomogeneity, and light-source intensity. Therefore, there is a need to design a novel dual-emission ratiometric fluorescence probe for the determination of MFX and Cu2+ to address these challenges and enhance the accuracy and sensitivity of the measurements.

RESULTS

A novel dual emission ratiometric-based fluorescence probe (B/G probe) was constructed by N-doped carbon dots and coumarin derivatives. The B/G probe exhibited two fluorescence emission peaks at 442 nm and 513 nm when excited at 336 nm. The inner-filter effect played a significant role in the quenching characteristics of MFX. Additionally, Cu2+ ions were found to have a strong affinity for MFX. Consequently, this fluorescence probe was developed to detect MFX initially and subsequently Cu2+ ions. The detection limit (DL) was 17.5 nM and 32.5 nM for MFX and Cu2+ ions, respectively. The B/G probe had better selectivity and anti-interference capability. Satisfactory recovery rate indicated that the B/G prob had good accuracy for detection of MFX and Cu2+ ions.

SIGNIFICANCE

This study represents the inaugural application of N-doped carbon dots and coumarin derivatives to construct a novel dual emission ratiometric-based fluorescence probe, demonstrating a marked advancement in innovation. This approach has significantly enhanced the sensitivity for the determination of MFX and Cu2+ ions. Compared with fluorescence probe of single signal, this method provides an effective strategy for detection MFX and Cu2+ with good accuracy, good selectivity, rapid detection and lower DL.

Immuno-PCR in the Analysis of Food Contaminants

Food safety is a significant issue of global concern. Consumer safety and government regulations drive the need for the accurate analysis of food contaminants, residues and other chemical constituents of concern. Traditional methods for the detection of food contaminants often present challenges, including lengthy processing times and food matrix interference; they often require expensive equipment, skilled personnel or have limitations in sensitivity or specificity. Developing novel analytical methods that are sensitive, specific, accurate and rapid is therefore crucial for ensuring food safety and the protection of consumers. The immuno-polymerase chain reaction (IPCR) method offers a promising solution in the analysis of food contaminants by combining the specificity of conventional immunological methods with the exponential sensitivity of PCR amplification. This review evaluates the current state of IPCR methods, describes a variety of existing IPCR formats and explores their application in the analysis of food contaminants, including pathogenic bacteria and their toxins, viruses, mycotoxins, allergens, polycyclic aromatic hydrocarbons, polychlorinated biphenyls, phthalic acid esters, pesticides, antibiotics and other food contaminants. Depending on the type of analyte, either sandwich or competitive format IPCR methods are predominantly used. This review also examines limitations of current IPCR methods and explores potential advancements for future implementation in the field of food safety.

Dual-Track Multifunctional Bimetallic Metal-Organic Frameworks for Antibiotic Enrichment and Detection

The improper use and overuse of antibiotics have led to significant burdens and detrimental effects on the environment, food supply, and human health. Herein, a magnetic solid-phase extraction program and an optical immunosensor based on bimetallic Ce/Zr-UiO 66 for the detection of antibiotics are developed. A magnetic Fe3O4@SiO2@Ce/Zr-UiO 66 metal-organic framework (MOF) is prepared to extract and enrich chloramphenicol from fish, wastewater, and urine samples, and a horseradish peroxidase (HRP)-Ce/Zr-UiO 66@bovine serum protein-chloramphenicol probe is used for the sensitive detection of chloramphenicol based on the dual-effect catalysis of Ce and HRP. In this manner, the application of Ce/Zr-UiO 66 in integrating sample pretreatment and antibiotic detection is systematically investigated and the associated mechanisms are explored. It is concluded that Ce/Zr-UiO 66 is a versatile dual-track material exhibiting high enrichment efficiency (6.37 mg g-1) and high sensitivity (limit of detection of 51.3 pg mL-1) for chloramphenicol detection and serving as a multifunctional MOF for safeguarding public health and hygiene.

Metal-organic framework (MOF)/C-dots and covalent organic framework (COF)/C-dots hybrid nanocomposites: Fabrications and applications in sensing, medical, environmental, and energy sectors

Developing new hybrid materials is critical for addressing the current needs of the world in various fields, such as energy, sensing, health, hygiene, and others. C-dots are a member of the carbon nanomaterial family with numerous applications. Aggregation is one of the barriers to the performance of C-dots, which causes luminescence quenching, surface area decreases, etc. To improve the performance of C-dots, numerous matrices including metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), and polymers have been composited with C-dots. The porous crystalline structures, which are constituents of metal nodes and organic linkers (MOFs) or covalently attached organic units (COFs) provide privileged features such as high specific surface area, tunable structures, and pore diameters, modifiable surface, high thermal, mechanical, and chemical stabilities. Also, the MOFs and COFs protect the C-dots from the environment. Therefore, MOF/C-dots and COF/C-dots composites combine their features while retaining topological properties and improving performances. In this review, we first compare MOFs with COFs as matrices for C-dots. Then, the recent progress in developing hybrid MOFs/C-dots and COFs/C-dots composites has been discussed and their applications in various fields have been explained briefly.

Determination of moxifloxacin in milk using a ratiometric fluorescent sensor based on Ag-MOF@curcumin

Moxifloxacin (MFX) has attracted increasing public concern recently, and the development of a simple and effective analysis method has become a research focus. In this work, a simple, sensitive and ratiometric fluorescent sensor based on Ag-MOF@curcumin was designed and investigated. Ag-MOF@curcumin displays emission at 410 nm and 475 nm under excitation at 330 nm. When MFX is added, a new emission peak appears at 500 nm, and the F500/F410 ratio has a linear relationship with the MFX concentration in the range 0-35 μmol L-1 with a low LOD (0.179 μmol L-1). Finally, the developed sensor was used for the determination of MFX in milk. This work provides an excellent fluorescent sensor for highly selective and rapid detection of MFX residues.

Chloramphenicol-imprinted polychitosan bounded with carbon dots as fluorescent sensor, dispersive sorbent, and drug carrier

Chitosan, an abundant natural polysaccharide, was conjugated with carbon dots (CDs) and self-polymerized with chloramphenicol (CAP) templates to synthesize CD-incorporated and molecularly CAP-imprinted polychitosan (CD-MIC). The CD-MIC was used for fluorescent sensing, dispersive sorption, and dosage release of CAP at different pH levels. The sphere of action mechanism, approved by emission and excitation fluorescence, UV-Vis absorption, and fluorescence lifetime measurements, regulated the fluorescence static quenching. By the Perrin model, the quenching extent was linearly correlated to CAP within 0.17 - 33.2 μM (LOD = 37 nM) at pH 7.0. With an imprinting factor of 3.1, the CD-MIC was more selective for CAP than CD, although it was less sensitive to CAP. The recoveries of 5.0 μM CAP from milk matrix were 95% (RSD = 2.3%) for CD-MIC probes and 62% (RSD = 4.5%) for CD. The Langmuir and pseudo-second-order models preferably described the isothermal and kinetic sorptions of CAP into the imprinted cavities in CD-MICs, respectively. The Weber - Morris kinetic model showed three stages involved in intraparticle diffusion, which was pH-dependent and gradually arduous at the later stage, and showed external diffusion partly engaged in the diffusion mechanism. The 20 - 70% of CAP formulated in CAP-embedded CD-MICs were released in 8 - 48 h. The release percentage was lower at pH 7.0 than at pH 5.0 and 9.0, but the equilibrium time was shorter. At pH 7.0, the release percentage reached 45% at 10 min and slowly increased to 51% at 24 h.

Boron difluoride modified zinc metal-organic framework-based "off-on" fluorescence sensor for tetracycline and Al3+ detection

A novel fluorescence "off-on" probe was developed using a boron difluoride-modified zinc metal-organic framework (Zn-MOF3) for sensitive determination of tetracycline (TC) and Al3+. The Zn-MOF3 has excellent optical property and good applicability in aqueous phase. The fluorescence recorded at 436 nm was quenched at the excitation wavelength of 336 nm. Signal-off detection of tetracycline via fluorescence quenching of Zn-MOF3 is based on the inner filter effect. Fluorescence on-off-on detection of Al3+ occurs via the specific binding between tetracycline and Al3+. The limits of detection for TC and Al3+ were 28.4 nM and 106.7 nM, respectively. This probe exhibited high selectivity which was used for the determination of TC and Al3+ with satisfied recoveries (89.8 to 105.6% for TC, 90.0 to 110.4% for Al3+) and good precision (< 5%) in milk. The developed sensor represents the first "off-on" system for fluorescence detection of TC and Al3+ based on Zn-MOF3 with a better aspect of the innovation.

Bimetallic nanozyme triple-emission fluorescence intelligent sensing platform-integrated molecular imprinting for ultrasensitive visual detection of triclosan

Triclosan (TCS) is an endocrine disruptor, which has been widely used in daily chemicals, resulting in the potential risk to the ecosystem and human health. Herein, a smartphone-integrated bimetallic nanozyme triple-emission fluorescence capillary imprinted sensing system was developed for ultrasensitive and intelligent visual microanalysis of TCS. Carbon dots (CDs) and bimetallic organic framework (MOF-(Fe/Co)-NH2) were used as fluorescence sources to synthesize nanozyme fluorescence molecularly imprinted polymer (MOF-(Fe/Co)-NH2@CDs@NMIP), which oxidized o-phenylenediamine to 2,3-diaminophenazine (OPDox), resulting in the derivation of a new fluorescence peak at 556 nm. In the existence of TCS, the fluorescence of MOF-(Fe/Co)-NH2 at 450 nm was restored, the fluorescence of OPDox at 556 nm was suppressed, and the CDs fluorescence of at 686 nm remained constant. The color of triple-emission fluorescence imprinted sensor varied from yellow to pink to purple to blue. The response efficiency (F450/F556/F686) of this sensing platform based on the capillary waveguide effect demonstrated a significant linear relationship toward the concentration of TCS ranged from 1.0 × 10-12 to 1.5 × 10-10 M with the LOD of 8.0 × 10-13 M. Compared with dual-emission capillary fluorescence sensor, this sensing system has higher sensitivity and richer visual color. Combined with the smartphone-integrated portable sensing platform, the color of fluorescence was transformed into an RGB value to calculate TCS concentration with the LOD of 9.6 × 10-13 M, providing a novel method for intelligent visual microanalysis (18 μL/time) of environmental pollutants.

High CTCF expression mediated by FGD5-AS1/miR-19a-3p axis is associated with immunosuppression and pancreatic cancer progression

The most common reason for cancer-related death globally is predicted to be pancreatic cancer (PC), one of the deadliest cancers. The CCCTC-binding factor (CTCF) regulates the three-dimensional structure of chromatin, was reported to be highly regulated in various malignancies. However, the underlying biological functions and possible pathways via which CTCF promotes PC progression remain unclear. Herein, we examined the CTCF function in PC and discovered that CTCF expression in PC tissues was significantly raised compared to neighboring healthy tissues. Additionally, Kaplan-Meier survival analysis demonstrated a strong connection between elevated CTCF expression and poor patient prognosis. A study of the ROC curve (receiver operating characteristic) revealed an AUC value for CTCF of 0.968. Subsequent correlation analysis exhibited a strong relationship between immunosuppression and CTCF expression in PC. CTCF knockdown significantly inhibited the malignant biological process of PC in vitro and in vivo, suggesting that CTCF may be a potential PC treatment target. We also identified the FGD5 antisense RNA 1 (FGD5-AS1)/miR-19a-3p axis as a possible upstream mechanism for CTCF overexpression. In conclusion, our data suggest that ceRNA-mediated CTCF overexpression contributes to the suppression of anti-tumor immune responses in PC and could be a predictive biomarker and potential PC treatment target.

Luminescence of carbon quantum dots and their application in biochemistry

Similar to fullerenes, carbon nanotubes and graphene, carbon dots (CDs) are causing a lot of research work in their own right. CDs are a type of surface-passivated quantum dot that contain carbon atoms. Their distinctive characteristics, such as luminescent emission that varies with size and wavelength, resistance to photobleaching, easy biological binding, lack of toxicity, and economical production without the need for intricate synthetic processes, have led to a noteworthy surge in attention within the research community. Different techniques can be utilized to create these CDs, spanning from basic candle burning to laser ablation. This review article delves into the principles of fluorescence technology, providing insights into how different synthesis methods of quantum dots impact their luminescent properties. Additionally, it highlights the latest applications of quantum dots in catalysis and biomedical fields, with special emphasis on the current status of luminescent properties in biology and chemistry. Towards the end, the article discusses the limitations of quantum dots in current practical applications, pointing out that CDs hold promising potential for future applications.

Polyamidoamine Dendrimers Functionalized Water-Stable Metal-Organic Frameworks for Sensitive Fluorescent Detection of Heavy Metal Ions in Aqueous Solution

In this work, polyamidoamine (PAMAM)-functionalized water-stable Al-based metal-organic frameworks (MIL-53(Al)-NH2) were proposed with enhanced fluorescence intensity, and used for the sensitive detection of heavy metal ions in aqueous solution. The size and morphology of MIL-53(Al)-NH2 were effectively optimized by regulating the component of the reaction solvents. PAMAM dendrimers were subsequently grafted onto the surface with glutaraldehyde as a cross-linking agent. It was found that the size and morphology of MIL-53(Al)-NH2 have great influence on their fluorescence properties, and PAMAM grafting could distinctly further improve their fluorescence intensity. With higher fluorescence intensity, the PAMAM-grafted MIL-53(Al)-NH2 showed good linearity (R2 = 0.9925-0.9990) and satisfactory sensitivity (LOD = 1.1-8.6 μmol) in heavy metal ions determination. Fluorescence enhancement and heavy metal ions detection mechanisms were discussed following the experimental results. Furthermore, analogous water-stable Materials of Institute Lavoisier (MIL) metal-organic frameworks such as MIL-53(Fe)-NH2 were also proved to have similar fluorescence enhancement performance after PAMAM modification, which demonstrates the universality of the method and the great application prospects in the design of PAMAM-functionalized high-sensitivity fluorescence sensors.

Smartphone-integrated tri-color fluorescence sensing platform based on acid-sensitive fluorescence imprinted polymers for dual-mode visual intelligent detection of ibuprofen, chloramphenicol and florfenicol

The abuse of multiple antibiotics and anti-inflammatory drugs can harm the ecological environment and human health. Herein, a smartphone-integrated tri-color fluorescence sensing platform based on acid-sensitive fluorescence imprinted polymers was proposed for dual-mode visual intelligent detection of ibuprofen (IP), chloramphenicol (CAP), and florfenicol (FF). In this research, the dual-mode of tri-color ratiometric fluorescence imprinted sensor (TC-FMIPs) was realized at different pH environments for the detection IP, CAP, and FF. The fluorescence peak at 551 nm of TC-FMIPs was quenched in the presence of IP solution and fluorescence peak at 687 nm was quenched in the presence of CAP phosphate buffer solution (PBS, pH 7.0), while the fluorescence peak at 433 nm kept stable. Interestingly, the TC-FMIPs has a peroxidase-like activity, in which a new fluorescence peak at 561 nm was quenched and the fluorescence peak at 433 nm increased gradually with the addition of FF solution in pH 4.0 PBS. The TC-FMIPs showed a low detection limit of 10 pM, 8.5 pM, and 5.5 nM for IP, CAP, and FF, respectively. Additionally, a smartphone was used to capture of fluorescence colors and read out the RGB values for intelligent detection of IP, CAP, and FF, in which the detection limit was calculated as 15 pM, 12 pM and 7 nM toward IP, CAP and FF, respectively. The smartphone-integrated tri-color fluorescence sensing platform was developed for dual-mode visual intelligent detection of IP, CAP and FF successfully, which provided a new strategy for multi-target detection in the complex environment.

Novel Dual-Signal SiO2-COOH@MIPs Electrochemical Sensor for Highly Sensitive Detection of Chloramphenicol in Milk

In view of the great threat of chloramphenicol (CAP) to human health and the fact that a few producers have illegally used CAP in the food production process to seek economic benefits in disregard of laws and regulations and consumer health, we urgently need a detection method with convenient operation, rapid response, and high sensitivity capabilities to detect CAP in food to ensure people's health. Herein, a molecularly imprinted polymer (MIP) electrochemical sensor based on a dual-signal strategy was designed for the highly sensitive analysis of CAP in milk. The NiFe Prussian blue analog (NiFe-PBA) and SnS₂ nanoflowers were modified successively on the electrode surface to obtain dual signals from [Fe(CN)₆]^3-/4- at 0.2 V and NiFe-PBA at 0.5 V. SiO₂-COOH@MIPs that could specifically recognize CAP were synthesized via thermal polymerization using carboxylated silica microspheres (SiO₂-COOH) as carriers. When the CAP was adsorbed by SiO₂-COOH@MIPs, the above two oxidation peak currents decreased at the same time, allowing the double-signal analysis. The SiO₂-COOH@MIPs/SnS₂/NiFe-PBA/GCE sensor used for determining CAP was successfully prepared. The sensor utilized the interactions of various nanomaterials to achieve high-sensitivity dual-signal detection, which had certain innovative significance. At the same time, the MIPs were synthesized using a surface molecular imprinting technology, which could omit the time of polymerization and elution and met the requirements for rapid detection. After optimizing the experimental conditions, the detection range of the sensor was 10^-8 g/L-10^-2 g/L and the limit of detection reached 3.3 × 10^-9 g/L (S/N = 3). The sensor had satisfactory specificity, reproducibility, and stability, and was successfully applied to the detection of real milk samples.

Recent research progress in CDs@MOFs composites: fabrication, property modulation, and application

Carbon dots (CDs) have exhibited a promising application prospect in many fields because of their good fluorescence properties, biocompatibility, low toxicity, and easy functionalization. In order to improve their photoelectricity and stability, metal-organic frameworks (MOFs) can be used as host materials to provide ideal carriers for CDs to realize the multifunctional composites of CDs and MOFs (CDs@MOFs). At present, CDs@MOFs composites have shown tremendous application potential because they have various advantages of both CDs and MOFs. In this review, the synthesis methods of CDs@MOFs composites are firstly introduced. Then, the influence of the synergy between CDs and MOFs on the regulation of their structures and optical properties is highlighted. Furthermore, the recent application researches of CDs@MOFs composites in fluorescent probes, solid-state lighting, and photoelectrocatalysis are generalized. Finally, the critical issues, challenges, and solutions on their structure and property regulation and application are put forward, and their commercialization direction is also prospected.