Human telomeric DNA sequences are a major target for the antitumour drug bleomycin

Mutagen-induced telomere instability in human cells

Telomere instability is one of the main sources of genome instability and may result from chromosome end loss (due to chromosome breakage at one or both ends) or, more frequently, telomere dysfunction. Dysfunctional telomeres arise when they lose their end-capping function or become critically short, which causes chromosomal termini to behave like a DNA double-strand break. Telomere instability may occur at the chromosomal or at the molecular level, giving rise, respectively, to telomere-related chromosomal aberrations or the loss or modification of any of the components of the telomere (telomere DNA, telomere-associated proteins, or telomere RNA). Since telomeres play a fundamental role in maintaining genome stability, the study of telomere instability in cells exposed to mutagens is of great importance to understand the telomere-driven genomic instability present in those cells. In the present review, we will focus on the current knowledge about telomere instability induced by physical, chemical, and biological mutagens in human cells.

The influence of DNA methylation on the sequence specificity of UVB- and UVC-induced DNA damage

Ultraviolet light (UV) is one of the most common DNA damaging agents in the human environment. This paper examined the influence of DNA methylation on the level of UVB- and UVC-induced DNA damage. A purified DNA sequence containing CpG dinucleotides was methylated with a CpG methylase. We employed the linear amplification technique and the end-labelling approach followed by capillary electrophoresis with laser-induced fluorescence to investigate the sequence specificity of UV-induced DNA damage. The linear amplification technique mainly detects cyclobutane pyrimidine dimer (CPD) adducts, while the end-labelling approach mainly detects 6-4 photoproduct (6-4PP) lesions. The levels of CPD and 6-4PP adducts detected in methylated/unmethylated labelled sequences were analysed. The comparison showed that 5-methyl-cytosine significantly reduced the level of both CPD and 6-4PP adducts after UVB (308 nm) and UVC (254 nm) irradiation compared with the non-methylated counterpart.

Comparison of Different Methods to Determine the DNA Sequence Preference of Ionising Radiation-Induced DNA Damage

Ionising radiation (IR) is known to induce a wide variety of lesions in DNA. In this review, we compared three different techniques that examined the DNA sequence preference of IR-induced DNA damage at nucleotide resolution. These three techniques were: the linear amplification/polymerase stop assay, the end-labelling procedure, and Illumina next-generation genome-wide sequencing. The DNA sequence preference of IR-induced DNA damage was compared in purified DNA sequences including human genomic DNA. It was found that the DNA sequence preference of IR-induced DNA damage identified by the end-labelling procedure (that mainly detected single-strand breaks) and Illumina next-generation genome-wide sequencing (that mainly detected double-strand breaks) was at C nucleotides, while the linear amplification/polymerase stop assay (that mainly detected base damage) was at G nucleotides. A consensus sequence at the IR-induced DNA damage was found to be 5′-AGGC*C for the end-labelling technique, 5′-GGC*MH (where * is the cleavage site, M is A or C, H is any nucleotide except G) for the genome-wide technique, and 5′-GG* for the linear amplification/polymerase stop procedure. These three different approaches are important because they provide a deeper insight into the mechanism of action of IR-induced DNA damage.

The sequence preference of gamma radiation-induced DNA damage as determined by a polymerase stop assay

Purpose: The aim of this paper was to investigate the sequence preference of ionizing radiation (IR)-induced DNA damage as assessed by a linear amplification/polymerase stop (LA/PS) assay. The LA/PS assay is able to detect a wide range of IR-induced DNA lesions and this technique was utilized to quantitatively determine the preferential sites of gamma irradiation-induced DNA lesions in three different DNA sequences.Materials and methods: This analysis was performed on an automated DNA sequencer with capillary electrophoresis and laser-induced fluorescence detection.Results: The main outcome of this study was that G nucleotides were preferentially found at IR-induced polymerase stop sites. The individual nucleotides at the IR-induced DNA damage sites were analyzed and a consensus sequence of 5'-GG* (where * indicates the damaged nucleotide) was observed. In a separate method of analysis, the dinucleotides and trinucleotides at the IR-induced DNA damage sites were examined and 5'-GG* and 5'-G*G dinucleotides and 5'-GG*G trinucleotides were found to be the most prevalent. The use of the LA/PS assay permits a large number of IR-induced DNA lesions to be detected in the one procedure including: double- and single-strand breaks, apurinic/apyrimidinic sites and base damage.Conclusions: It was concluded that 2,6-diamino-4-hydroxy-5-formamidopyrimidine (Fapy-G) and the degradation products of 8-oxoG were possibly the main lesions detected. To our knowledge, this is the first occasion that the DNA sequence preference of IR-induced DNA damage as detected by a LA/PS assay has been reported.

A Chinese Traditional Therapy for Bleomycin-Induced Pulmonary Fibrosis in Mice

Pulmonary fibrosis is a chronic and fatal disease of lung tissue with high incidence and mortality in the world. The exploration of effective treatment for pulmonary fibrosis remains an urgent challenge. In our study, Qingfei Xieding was investigated as a novel Chinese traditional patent medicine against pulmonary fibrosis. A pulmonary fibrosis mouse model was constructed by injecting with bleomycin sulfate. Following Qingfei Xieding administration, lung samples were collected to assess pulmonary phenotype changes by analyzing lung coefficient, wet/dry, and histopathologic section. Levels of nitric oxide (NO), hydroxyproline (HYP), malondialdehyde (MDA), and total antioxidant capacity were measured to evaluate the degree of oxidation. A single-cell gel electrophoresis (SCGE) assay was used to evaluate bleomycin-induced DNA damage. Western blotting and real-time quantitative PCR were performed to determine the abundance of inducible nitric oxide synthase (iNOS), connective tissue growth factor (CTGF), alpha smooth muscle actin (α-SMA), and fibronectin (FN). In the present study, Qingfei Xieding administration significantly attenuated bleomycin-induced pulmonary fibrosis in mice by reducing lung coefficient, wet/dry, NO, HYP, and MDA as well as the expression of iNOS, CTGF, α-SMA, FN, and DNA damage. The results indicated that Qingfei Xieding is effective to resist oxidative damage and histopathologic lesion, serving a protection role on bleomycin-induced pulmonary fibrosis.

The Interaction of the Metallo-Glycopeptide Anti-Tumour Drug Bleomycin with DNA

The cancer chemotherapeutic drug, bleomycin, is clinically used to treat several neoplasms including testicular and ovarian cancers. Bleomycin is a metallo-glycopeptide antibiotic that requires a transition metal ion, usually Fe(II), for activity. In this review, the properties of bleomycin are examined, especially the interaction of bleomycin with DNA. A Fe(II)-bleomycin complex is capable of DNA cleavage and this process is thought to be the major determinant for the cytotoxicity of bleomycin. The DNA sequence specificity of bleomycin cleavage is found to at 5′-GT* and 5′-GC* dinucleotides (where * indicates the cleaved nucleotide). Using next-generation DNA sequencing, over 200 million double-strand breaks were analysed, and an expanded bleomycin sequence specificity was found to be 5′-RTGT*AY (where R is G or A and Y is T or C) in cellular DNA and 5′-TGT*AT in purified DNA. The different environment of cellular DNA compared to purified DNA was proposed to be responsible for the difference. A number of bleomycin analogues have been examined and their interaction with DNA is also discussed. In particular, the production of bleomycin analogues via genetic manipulation of the modular non-ribosomal peptide synthetases and polyketide synthases in the bleomycin gene cluster is reviewed. The prospects for the synthesis of bleomycin analogues with increased effectiveness as cancer chemotherapeutic agents is also explored.

The sequence specificity of UV-induced DNA damage in a systematically altered DNA sequence

The sequence specificity of UV-induced DNA damage was investigated in a specifically designed DNA plasmid using two procedures: end-labelling and linear amplification. Absorption of UV photons by DNA leads to dimerisation of pyrimidine bases and produces two major photoproducts, cyclobutane pyrimidine dimers (CPDs) and pyrimidine(6-4)pyrimidone photoproducts (6-4PPs). A previous study had determined that two hexanucleotide sequences, 5'-GCTC*AC and 5'-TATT*AA, were high intensity UV-induced DNA damage sites. The UV clone plasmid was constructed by systematically altering each nucleotide of these two hexanucleotide sequences. One of the main goals of this study was to determine the influence of single nucleotide alterations on the intensity of UV-induced DNA damage. The sequence 5'-GCTC*AC was designed to examine the sequence specificity of 6-4PPs and the highest intensity 6-4PP damage sites were found at 5'-GTTC*CC nucleotides. The sequence 5'-TATT*AA was devised to investigate the sequence specificity of CPDs and the highest intensity CPD damage sites were found at 5'-TTTT*CG nucleotides. It was proposed that the tetranucleotide DNA sequence, 5'-YTC*Y (where Y is T or C), was the consensus sequence for the highest intensity UV-induced 6-4PP adduct sites; while it was 5'-YTT*C for the highest intensity UV-induced CPD damage sites. These consensus tetranucleotides are composed entirely of consecutive pyrimidines and must have a DNA conformation that is highly productive for the absorption of UV photons.

DNA and chromosome damage induced by bleomycin in mammalian cells: An update

Bleomycin (BLM) is an antibiotic isolated from Streptomyces verticillus. It has radiomimetic actions on DNA thus it has been widely used in clinical chemotherapy for the treatment of different types of cancer, including head and neck tumors, lymphomas, squamous-cell carcinomas and germ-cell tumors. Because of this, the study of BLM genotoxicity is of practical interest. This antibiotic is an S-independent clastogen and an agent that generates free radicals and induces single- and double-strand breaks in DNA. In the present review, we will summarize our current knowledge concerning the DNA and chromosome damage induced by BLM in mammalian cells, with emphasis on new developments published since 1991.

The Sequence Preference of Gamma-Radiation-Induced Damage in End-Labeled DNA after Heat Treatment

In this work, we examined the DNA sequence preference of gamma-radiation-induced DNA damage in purified DNA sequences after heat treatment. DNA was fluorescently end-labeled and gamma-radiation-induced DNA cleavage was examined using capillary electrophoresis with laser-induced fluorescence detection. Our findings provide evidence that gamma-radiation-induced DNA damage to end-labeled DNA is nonrandom and has a sequence preference. The degree of cleavage was quantified at each nucleotide, and we observed that preferential cleavage occurred at C nucleotides with lesser cleavage at G nucleotides, while being very low at T nucleotides. The differences in percentage cleavage at individual nucleotides ranged up to sixfold. The DNA sequences surrounding the most intense radiation-induced DNA cleavage sites were examined and a consensus sequence 5'-AGGC*C (where C* is the cleavage site) was found. The highest intensity gamma-radiation-induced DNA cleavage sites were found at the dinucleotides, 5'-GG*, 5'-GC*, 5'-C*C and 5'-G*G and at the trinucleotides, 5'-GG*C, 5'-TC*A, 5'-GG*G and 5'-GC*C. These findings have implications for our understanding of ionizing radiation-induced DNA damage.

The sequence preference of DNA cleavage by T4 endonuclease VII

The enzyme T4 endonuclease VII is a resolvase that acts on branched DNA intermediates during genetic recombination, by cleaving DNA with staggered cuts approximately 3-6 bp apart. In this paper, we investigated the sequence preference of this cleavage reaction utilising two different DNA sequences. For the first time, the DNA sequence preference of T4 endonuclease VII cleavage sites has been examined without the presence of a known DNA substrate to mask any inherent nucleotide preference. The use of the ABI3730 platform enables the cleavage site to be determined at nucleotide resolution. We found that T4 endonuclease VII cleaves DNA with a sequence preference. We calculated the frequency of nucleotides surrounding the cleavage sites and found that following nucleotides had the highest incidence: AWTAN*STC, where N* indicates the cleavage site between positions 0 and 1, N is any base, W is A or T, and S is G or C. An A at position -1 and T at position +2 were the most predominant nucleotides at the cleavage site. Using a Sequence Logo method, the sequence TATTAN*CT was derived at the cleavage site. Note that A and T nucleotides were highly preferred 5' to the cleavage sites in both methods of analysis. It was proposed that the enzyme recognises the narrower minor groove of these consecutive AT base pairs and cleaves DNA 3' to this feature.

An extended sequence specificity for UV-induced DNA damage

The sequence specificity of UV-induced DNA damage was determined with a higher precision and accuracy than previously reported. UV light induces two major damage adducts: cyclobutane pyrimidine dimers (CPDs) and pyrimidine(6-4)pyrimidone photoproducts (6-4PPs). Employing capillary electrophoresis with laser-induced fluorescence and taking advantages of the distinct properties of the CPDs and 6-4PPs, we studied the sequence specificity of UV-induced DNA damage in a purified DNA sequence using two approaches: end-labelling and a polymerase stop/linear amplification assay. A mitochondrial DNA sequence that contained a random nucleotide composition was employed as the target DNA sequence. With previous methodology, the UV sequence specificity was determined at a dinucleotide or trinucleotide level; however, in this paper, we have extended the UV sequence specificity to a hexanucleotide level. With the end-labelling technique (for 6-4PPs), the consensus sequence was found to be 5'-GCTC*AC (where C* is the breakage site); while with the linear amplification procedure, it was 5'-TCTT*AC. With end-labelling, the dinucleotide frequency of occurrence was highest for 5'-TC*, 5'-TT* and 5'-CC*; whereas it was 5'-TT* for linear amplification. The influence of neighbouring nucleotides on the degree of UV-induced DNA damage was also examined. The core sequences consisted of pyrimidine nucleotides 5'-CTC* and 5'-CTT* while an A at position "1" and C at position "2" enhanced UV-induced DNA damage.

The DNA sequence specificity of bleomycin cleavage in a systematically altered DNA sequence

Bleomycin is an anti-tumour agent that is clinically used to treat several types of cancers. Bleomycin cleaves DNA at specific DNA sequences and recent genome-wide DNA sequencing specificity data indicated that the sequence 5'-RTGT*AY (where T* is the site of bleomycin cleavage, R is G/A and Y is T/C) is preferentially cleaved by bleomycin in human cells. Based on this DNA sequence, we constructed a plasmid clone to explore this bleomycin cleavage preference. By systematic variation of single nucleotides in the 5'-RTGT*AY sequence, we were able to investigate the effect of nucleotide changes on bleomycin cleavage efficiency. We observed that the preferred consensus DNA sequence for bleomycin cleavage in the plasmid clone was 5'-YYGT*AW (where W is A/T). The most highly cleaved sequence was 5'-TCGT*AT and, in fact, the seven most highly cleaved sequences conformed to the consensus sequence 5'-YYGT*AW. A comparison with genome-wide results was also performed and while the core sequence was similar in both environments, the surrounding nucleotides were different.

Zorbamycin has a different DNA sequence selectivity compared with bleomycin and analogues

Bleomycin (BLM) is used clinically in combination with a number of other agents for the treatment of several types of tumours. Members of the BLM family of drugs include zorbamycin (ZBM), phleomycin D1, BLM A2 and BLM B2. By manipulating the BLM biosynthetic machinery, we have produced two new BLM analogues, BLM Z and 6'-deoxy-BLM Z, with the latter exhibiting significantly improved DNA cleavage activity. Here we determined the DNA sequence specificity of BLM Z, 6'-deoxy-BLM Z and ZBM, in comparison with BLM, with high precision using purified plasmid DNA and our recently developed technique. It was found that ZBM had a different DNA sequence specificity compared with BLM and the BLM analogues. While BLM and the BLM analogues showed a similar DNA sequence specificity, with TGTA sequences as the main site of cleavage, ZBM exhibited a distinct DNA sequence specificity, with both TGTA and TGTG as the predominant cleavage sites. These differences in DNA sequence specificity are discussed in relation to the structures of ZBM, BLM and the BLM analogues. Our findings support the strategy of manipulating the BLM biosynthetic machinery for the production of novel BLM analogues, difficult to prepare by total synthesis; some of which could have beneficial cancer chemotherapeutic properties.

The genome-wide DNA sequence specificity of the anti-tumour drug bleomycin in human cells

The cancer chemotherapeutic agent, bleomycin, cleaves DNA at specific sites. For the first time, the genome-wide DNA sequence specificity of bleomycin breakage was determined in human cells. Utilising Illumina next-generation DNA sequencing techniques, over 200 million bleomycin cleavage sites were examined to elucidate the bleomycin genome-wide DNA selectivity. The genome-wide bleomycin cleavage data were analysed by four different methods to determine the cellular DNA sequence specificity of bleomycin strand breakage. For the most highly cleaved DNA sequences, the preferred site of bleomycin breakage was at 5'-GT* dinucleotide sequences (where the asterisk indicates the bleomycin cleavage site), with lesser cleavage at 5'-GC* dinucleotides. This investigation also determined longer bleomycin cleavage sequences, with preferred cleavage at 5'-GT*A and 5'- TGT* trinucleotide sequences, and 5'-TGT*A tetranucleotides. For cellular DNA, the hexanucleotide DNA sequence 5'-RTGT*AY (where R is a purine and Y is a pyrimidine) was the most highly cleaved DNA sequence. It was striking that alternating purine-pyrimidine sequences were highly cleaved by bleomycin. The highest intensity cleavage sites in cellular and purified DNA were very similar although there were some minor differences. Statistical nucleotide frequency analysis indicated a G nucleotide was present at the -3 position (relative to the cleavage site) in cellular DNA but was absent in purified DNA.

The determination of the DNA sequence specificity of bleomycin-induced abasic sites

The DNA sequence specificity of the cancer chemotherapeutic agent, bleomycin, was determined with high precision in purified plasmid DNA using an improved technique. This improved technique involved the labelling of the 5'- and 3'-ends of DNA with different fluorescent tags, followed by simultaneous cleavage by bleomycin and capillary electrophoresis with laser-induced fluorescence. This permitted the determination of bleomycin cleavage specificity with high accuracy since end-label bias was greatly reduced. Bleomycin produces single- and double-strand breaks, abasic sites and other base damage in DNA. This high-precision method was utilised to elucidate, for the first time, the DNA sequence specificity of bleomycin-induced DNA damage at abasic sites. This was accomplished using endonuclease IV that cleaves DNA at abasic sites after bleomycin damage. It was found that bleomycin-induced abasic sites formed at 5'-GC and 5'-GT sites while bleomycin-induced phosphodiester strand breaks formed mainly at 5'-GT dinucleotides. Since bleomycin-induced abasic sites are produced in the absence of molecular oxygen, this difference in DNA sequence specificity could be important in hypoxic tumour cells.

The anti-tumor drug bleomycin preferentially cleaves at the transcription start sites of actively transcribed genes in human cells

The genome-wide pattern of DNA cleavage at transcription start sites (TSSs) for the anti-tumor drug bleomycin was examined in human HeLa cells using next-generation DNA sequencing. It was found that actively transcribed genes were preferentially cleaved compared with non-transcribed genes. The 143,600 identified human TSSs were split into non-transcribed genes (82,596) and transcribed genes (61,004) for HeLa cells. These transcribed genes were further split into quintiles of 12,201 genes comprising the top 20, 20-40, 40-60, 60-80, and 80-100 % of expressed genes. The bleomycin cleavage pattern at highly transcribed gene TSSs was greatly enhanced compared with purified DNA and non-transcribed gene TSSs. The top 20 and 20-40 % quintiles had a very similar enhanced cleavage pattern, the 40-60 % quintile was intermediate, while the 60-80 and 80-100 % quintiles were close to the non-transcribed and purified DNA profiles. The pattern of bleomycin enhanced cleavage had peaks that were approximately 200 bp apart, and this indicated that bleomycin was identifying the presence of phased nucleosomes at TSSs. Hence bleomycin can be utilized to detect chromatin structures that are present at actively transcribed genes. In this study, for the first time, the pattern of DNA damage by a clinically utilized cancer chemotherapeutic agent was performed on a human genome-wide scale at the nucleotide level.

MutS homologue hMSH5: recombinational DSB repair and non-synonymous polymorphic variants

Double-strand breaks (DSBs) constitute the most deleterious form of DNA lesions that can lead to genome alterations and cell death, and the vast majority of DSBs arise pathologically in response to DNA damaging agents such as ionizing radiation (IR) and chemotherapeutic agents. Recent studies have implicated a role for the human MutS homologue hMSH5 in homologous recombination (HR)-mediated DSB repair and the DNA damage response. In the present study, we show that hMSH5 promotes HR-based DSB repair, and this property resides in the carboxyl-terminal portion of the protein. Our results demonstrate that DSB-triggered hMSH5 chromatin association peaks at the proximal regions of the DSB and decreases gradually with increased distance from the break. Furthermore, the DSB-triggered hMSH5 chromatin association is preceded by and relies on the assembly of hMRE11 and hRad51 at the proximal regions of the DSB. Lastly, the potential effects of hMSH5 non-synonymous variants (L85F, Y202C, V206F, R351G, L377F, and P786S) on HR and cell survival in response to DSB-inducing anticancer agents have been analyzed. These experiments show that the expression of hMSH5 variants elicits different survival responses to anticancer drugs cisplatin, bleomycin, doxorubicin and camptothecin. However, the effects of hMSH5 variants on survival responses to DSB-inducing agents are not directly correlated to their effects exerted on HR-mediated DSB repair, suggesting that the roles of hMSH5 variants in the processes of DNA damage response and repair are multifaceted.

The interaction of cisplatin with a human telomeric DNA sequence containing seventeen tandem repeats

The anti-tumour drug, cisplatin, preferentially forms adducts at G-rich DNA sequences. Telomeres are found at the ends of chromosomes and, in humans, contain the repeated DNA sequence (GGGTTA)(n) that is expected to be targeted by cisplatin. Using a plasmid clone with 17 tandem telomeric repeats, (GGGTTA)(17), the DNA sequence specificity of cisplatin was investigated utilising the linear amplification procedure that pin-pointed the precise sites of cisplatin adduct formation. This procedure used a fluorescently labelled primer and capillary electrophoresis with laser-induced fluorescence detection to determine the DNA sequence specificity of cisplatin. This technique provided a very accurate analysis of cisplatin-DNA adduct formation in a long telomeric repeat DNA sequence. The DNA sequence specificity of cisplatin in a long telomeric tandem repeat has not been previously reported. The results indicated that the 3'-end of the G-rich strand of the telomeric repeat was preferentially damaged by cisplatin and this suggests that the telomeric DNA repeat has an unusual conformation.

Bleomycin DNA damage: Anomalous mobility of 3'-phosphoglycolate termini in an automated capillary DNA sequencer

An automated capillary DNA sequencer with laser-induced fluorescence detection can be utilised for DNA fragment analysis. The precise mobilities of DNA fragments with different chemical termini are especially important in the determination of the sequence specificity of DNA damaging agents. The aim of this study was to examine the electrophoretic mobility profile of DNA fragments with different 3'-termini. The nature of the 3'-teminal residue was found to have a major effect on the electrophoretic mobility of the DNA fragment, especially for 3'-phosphoglycolate termini that migrated anomalously by 3-6 nucleotides. Using the automated capillary sequencer, the electrophoretic mobilities of DNA fragments with different 3'-termini including 3'-hydrogen, 3'-hydroxyl, 3'-phosphate, and 3'-phosphoglycolate were extensively quantified and compared relative to each other. The 3'-hydrogen termini were generated by dideoxy sequencing; 3'-hydroxyl ends by minus sequencing; 3'-phosphate by Maxam-Gilbert chemical sequencing; and 3'-phosphoglycolate by bleomycin cleavage. The mobilities of these DNA fragments with different 3'-termini were found to be: (slowest) 3'-hydroxyl<3'-hydrogen<3'-phosphate<3'-phosphoglycolate (fastest); with average relative mobilities of 0.00<0.12<0.63<4.42 nucleotides, respectively. The possible causes of the unusual electrophoretic mobility of the 3'-phosphoglycolate termini were discussed.

The use of automated sequencing techniques to investigate the sequence selectivity of DNA-damaging agents

In this review, the use of automated DNA sequencing techniques to determine the sequence specificity of compounds that interact with DNA is discussed. The sequence specificity of a DNA-damaging agent is an essential element in determining the cellular mechanism of action of a drug. A number of DNA-damaging compounds are mutagenic, carcinogenic, as well as being widely used as cancer chemotherapeutic agents. The distribution of lesions in a sequence of DNA can give vital clues in the determination of the precise mechanism of interaction of the agent with DNA. The DNA sequence specificity of a number of DNA-damaging agents has been delineated using automated DNA sequencing technology, and these studies are discussed in this review. The current state-of-the-art methodology involves capillary electrophoresis with laser-induced fluorescence detection usually on an Applied Biosystems ABI 3730 capillary sequencer. This current technique has higher resolution, greater sensitivity, higher precision, more rapid separation times, is safer and easier to perform than previous methods. The two main methods to determine the DNA sequence selectivity of compounds that interact with DNA are described: end labelling and the polymerase stop assay. The interaction of the antitumour drug, bleomycin, with DNA is utilized to illustrate the recent technological advances.