Multiplex PCR assay and lyophilization for detection of Salmonella spp., Staphylococcus aureus and Bacillus cereus in pork products

Vacuum Oven Drying: A Cost-Effective Way of Producing Field-Deployable Reagents for In-house Real-Time PCR Methods

The polymerase chain reaction (PCR), is a widely used, sensitive and reliable method for detecting pathogens. However, technical limitations may restrict its use outside sophisticated laboratories, e.g. for detecting pathogens at the site of a disease outbreak. In this study, real-time PCR reagents specific to four bacteria (Bacillus anthracis, Yersinia pestis, Francisella tularensis, and Brucella spp.) and to the Influenza A virus were dried using a vacuum oven drying method. The performance of the dried reagents stored at different temperatures, was monitored using both a standard-size and a portable real-time PCR instrument. The vacuum oven dried real-time PCR reagents were stable and retained the sensitivity for at least 14 months when stored in a refrigerator (+ 4 °C). When stored at room temperature, DNA assays remained stable for at least 10 weeks and Influenza A RNA assay for 3 weeks. These results demonstrate the feasibility of vacuum oven dried real-time PCR reagents and a portable thermocycler for the rapid and reliable detection of pathogens. The drying protocol presented here is cost-effective and easy to use, and could be applied to real-time PCR methods specific to other pathogens as well. In addition, this in-house drying protocol reduces reliance on commercial PCR tests during a time of shortage, such as that experienced during the Corovirus disease (COVID-19) crisis.

A sensitive SERS-based assay technique for accurate detection of foodborne pathogens without interference

The accurate and sensitive detection of foodborne pathogens is critical for timely food quality supervision and human health. To address this issue, herein, we developed a simple and novel surface-enhanced Raman scattering (SERS) assay using p-mercaptobenzoic acid (MBN)-modified gold nanoparticles (Au NPs) and magnetic beads for interference-free detection of Escherichia coli (E. coli). This assay technique cleverly reduced silver ions (Ag+) on the surface of E. coli (bacteria@Ag NPs), and the functionalized magnetic beads (capture probes) captured and enriched bacteria@Ag NPs, forming the structure of the capture probes-bacteria@Ag NPs. Then, the capture probes-bacteria@Ag NPs were dissolved in the acidic medium, and the Ag NPs on the surface of E. coli was converted to Ag+ again. Due to the special coordination between Ag+ and MBN-modified Au NPs (functionalized Au NPs), the SERS intensity of MBN exhibited a positive correlation with the E. coli concentration, and the SERS detection assay of E. coli was established. The signal of the functionalized Au NPs located at 2228 cm-1 perfectly avoided the spectral overlap with coexisting materials in the Raman fingerprint region, which ensured the accuracy of the technique. The controlled aggregation of the functionalized Au NPs ensured the reproducibility and reliability of the detection system; the emergence of MBs greatly reduced the reaction time and made sure the operation was rapid, simple and portable. The limit of detection (LOD) for E. coli was as low as 10 cfu mL-1, and the detection assay was successfully applied for the detection of E. coli in bottled water and milk. As a sensitive and accurate analytical technique for the detection of pathogens, this SERS-based method has great potential to be applied in the field of food safety.

Development and evaluation of a lyophilization protocol for colorimetric RT-LAMP diagnostic assay for COVID-19

Molecular diagnostics involving nucleic acids (DNA and RNA) are regarded as extremely functional tools. During the 2020 global health crisis, efforts intensified to optimize the production and delivery of molecular diagnostic kits for detecting SARS-CoV-2. During this period, RT-LAMP emerged as a significant focus. However, the thermolability of the reagents used in this technique necessitates special low-temperature infrastructure for transport, storage, and conservation. These requirements limit distribution capacity and necessitate cost-increasing adaptations. Consequently, this report details the development of a lyophilization protocol for reagents in a colorimetric RT-LAMP diagnostic kit to detect SARS-CoV-2, facilitating room-temperature transport and storage. We conducted tests to identify the ideal excipients that maintain the molecular integrity of the reagents and ensure their stability during room-temperature storage and transport. The optimal condition identified involved adding 5% PEG 8000 and 75 mM trehalose to the RT-LAMP reaction, which enabled stability at room temperature for up to 28 days and yielded an analytical and diagnostic sensitivity and specificity of 83.33% and 90%, respectively, for detecting SARS-CoV-2. This study presents the results of a lyophilized colorimetric RT-LAMP COVID-19 detection assay with diagnostic sensitivity and specificity comparable to RT-qPCR, particularly in samples with high viral load.

CRISPR/Cas12a-powered evanescent wave fluorescence nanobiosensing platform for nucleic acid amplification-free detection of Staphylococcus aureus with multiple signal enhancements

Although CRISPR-based biosensors for pathogenic detection are highly specific, they not sensitive enough and nucleic acid amplification is generally required to improve their sensitivity. However, this allows only binary operations and significantly limits practical applications. Here, a CRISPR/Cas12a-powered Evanescent wAve fluorescence nanobiosensing plaTform (CREAT) was developed for ultrasensitive nucleic acid amplification-free quantitative detection of pathogens with multiple signal enhancements. In addition to collateral cleavage amplification of the CRISPR/Cas12a system, we constructed nanophotonic structure-based evanescent wave fluorescence enhancement, Mg²⁺ or DNA-mediated fluorescence enhancement, and air-displacement fluorescence enhancement strategies for ultrasensitive detection of Staphylococcus aureus (S. aureus). Especially, the fluorescence signal detected by CREAT can be significantly enhanced by adding a simple air displacement step, thus improving detection sensitivity. This nanobiosensor detected real samples containing S. aureus, with a detection limit of 592 CFU/mL and 13.2 CFU/mL in 45 min and 90 min, respectively, which are comparable to those of RT-qPCR. This paves a new way for simple, rapid, sensitive, robust, and flexible on-site detection of S. aureus as well as other pathogens.

Development of a Multiplex Polymerase Chain Reaction-Based DNA Lateral Flow Assay as a Point-of-Care Diagnostic for Fast and Simultaneous Detection of MRSA and Vancomycin Resistance in Bacteremia

To reduce high mortality and morbidity rates, timely and proper treatment of methicillin-resistant Staphylococcus aureus (MRSA) bloodstream infection is required. A multiplex polymerase reaction (mPCR)-based DNA lateral flow assay (MBDLFA) was developed as a point-of-care diagnostic for simultaneous identification of S. aureus, methicillin resistance, and vancomycin resistance directly from blood or blood cultures. A mPCR was developed to detect nuc, mecA, and vanA/B; its sensitivity, specificity, and limit of detection (LOD) were determined. The developed reaction was further modified for use in MBDLFA and its sensitivity for detection of target genes from artificially inoculated blood samples was checked. The optimized mPCR successfully detected nuc, mecA, and vanA/B from genomic DNA of bacterial colonies with LODs of 107, 107, and 105 CFU/mL, respectively. The reaction was sensitive and specific. The optimized mPCR was used in MBDLFA that detected nuc, mecA, and vanA/B with LODs of 107, 108, and 104 CFU/mL, respectively, directly from artificially inoculated blood. The developed MBDLFA can be used as a rapid, cheap point-of-care diagnostic for detecting S. aureus, MRSA, and vancomycin resistance directly from blood and blood cultures in ~2 h with the naked eye. This will reduce morbidity, mortality, and treatment cost in S. aureus bacteremia.

Multiplex PCR method for the detection of human norovirus, Salmonella spp., Shigella spp., and shiga toxin producing Escherichia coli in blackberry, coriander, lettuce and strawberry

A multiplex PCR method was developed for the simultaneous detection of murine norovirus (MNV-1) as a surrogate for human norovirus (HuNoV) GI and GII, Salmonella spp., Shigella spp., and Shiga toxin producing Escherichia coli (STEC) in fresh produce. The toxicity of the glycine buffer on bacterial pathogens viability was evaluated. The growth of each of the three pathogens (previously stressed) was evaluated at 35 and 41.5 °C in modified buffered peptone water (mBPW) and trypticase soy broth (TSB), supplemented with vancomycin, novobiocin and brilliant green at two concentration levels. The selected conditions for simultaneous enrichment were: 41.5 °C/mBPW/supplemented with 8 ppm vancomycin, 0.6 ppm novobiocin and 0.2 ppm brilliant green. The pathogens and aerobic plate count (APC) growth was evaluated in the enrichment of lettuce, coriander, strawberry and blackberry under the best enrichment conditions. Starting from 1 to 10 CFU/mL, Salmonella reached from 7.63 to 8.91, Shigella 6.81 to 7.76 and STEC 7.43 to 9.27 log CFU/mL. The population reached for the APC was 5.11-6.56 log CFU/mL. Simultaneous detection by PCR was done using designed primers targeting invA, ipaH, stx1 and stx2 genes, and MNV-1. The detection sensitivity was 10-100 PFU for the MNV-1 and 1-10 CFU for each pathogenic bacteria. This protocol takes 6 h for MNV-1 and 24 h for Salmonella spp., Shigella spp., and STEC detection from the same food portion. In total, 200 samples were analyzed from retail markets from Queretaro, Mexico. Two strawberry samples were positive for HuNoV GI and one lettuce sample was positive for STEC. In conclusion, the method developed in this study is capable of detecting HuNoV GI and GII, Salmonella spp., Shigella spp and STEC from the same fresh produce sample.

A novel air-dried multiplex high-resolution melt assay for the detection of extended-spectrum β-lactamase and carbapenemase genes

OBJECTIVES

This study aimed to develop and evaluate a novel air-dried high-resolution melt (HRM) assay to detect eight major extended-spectrum β-lactamase (ESBL) (blaSHV and blaCTX-M groups 1 and 9) and carbapenemase (blaNDM, blaIMP, blaKPC, blaVIM and blaOXA-48-like) genes that confer resistance to cephalosporins and carbapenems.

METHODS

The assay was evaluated using 439 DNA samples extracted from bacterial isolates from Nepal, Malawi and the UK and 390 clinical isolates from Nepal with known antimicrobial susceptibility. Assay reproducibility was evaluated across five different real-time quantitative PCR (qPCR) instruments [Rotor-Gene® Q, QuantStudioTM 5, CFX96, LightCycler® 480 and Magnetic Induction Cycler (Mic)]. Assay stability was also assessed under different storage temperatures (6.2 ± 0.9°C, 20.4 ± 0.7°C and 29.7 ± 1.4°C) at six time points over 8 months.

RESULTS

The sensitivity and specificity (with 95% confidence intervals) for detecting ESBL and carbapenemase genes was 94.7% (92.5-96.5%) and 99.2% (98.8-99.5%) compared with the reference gel-based PCR and sequencing and 98.3% (97.0-99.3%) and 98.5% (98.0-98.9%) compared with the original HRM wet PCR mix format. Overall agreement was 91.1% (90.0-92.9%) when predicting phenotypic resistance to cefotaxime and meropenem among Enterobacteriaceae isolates. We observed almost perfect inter-machine reproducibility of the air-dried HRM assay, and no loss of sensitivity occurred under all storage conditions and time points.

CONCLUSION

We present a ready-to-use air-dried HRM PCR assay that offers an easy, thermostable, fast and accurate tool for the detection of ESBL and carbapenemase genes in DNA samples to improve antimicrobial resistance detection.

Transferable, easy-to-use and room-temperature-storable PCR mixes for microfluidic molecular diagnostics

As the outbreak of coronavirus disease 2019 (COVID-19), on-site molecular diagnosis is becoming increasingly important. In this study, a freeze-drying method was introduced for PCR reagents to meet the requirements of microfluidic molecular diagnosis. Using this method, PCR components were pre-mixed and freeze-dried as a bead, which could be transferred into microfluidic chips easily. As this bead only required reconstitution in water, operational steps of PCR were simplified, pipetting errors and errors associated with improper handling of wet reagents could also be reduced. In addition, 19 PCR mixes for different targets (including both RNA and DNA) detection were stable when stored at room temperature (18-25 °C) for 1-2 years and may be stored longer as activity monitoring remains ongoing. To shorten the stability testing time, accelerated stability testing at higher temperatures was proposed. The evaluation periods of the freeze-dried PCR mixes were shortened to less than one month when stored at 56 °C and 80 °C. When attempts were further tried to predict the shelf lives for freeze-dried PCR mixes, our findings challenged the classic view of the Q₁₀ method as a prediction model for freeze-dried PCR mixes and confirmed for the first time that this prediction was influenced by different factors at varying degrees. These studies and findings are important for the development of molecular diagnosis at both central laboratories and resource-limited areas.

Vancomycin-modified poly-l-lysine magnetic separation combined with multiplex polymerase chain reaction assay for efficient detection of Bacillus cereus in milk

In this study, a new vancomycin (Van)-modified poly-l-lysine (PLL) magnetic bead (MB) technique was developed for isolation of gram-positive bacteria. The method combines magnetic separation with a multiplex PCR (mPCR) assay and gel electrophoresis for easy and rapid detection of Bacillus cereus. Vancomycin was used as a molecular ligand between the MB and the d-alanyl-d-alanine moieties on the cell wall surface of B. cereus. The PLL served as a flexible molecular tether between the MB and Van that reduced steric hindrance maintaining the biological activity of Van. The MB-PLL-Van capture nanoprobes exhibited excellent capture and isolation efficiency for B. cereus in spiked milk matrix samples without interference from the complex food matrix. The subsequent mPCR assay showed high specificity for the 4 target genes in B. cereus, the entFM, cesB, cer, and 16S rRNA genes, that were used to achieve efficient genotyping and detection. Under optimum conditions, the limit of detection reached 10³ cfu/mL, with a dynamic range of detection at 10³ to 10⁷ cfu/mL in pure culture. Application of the MB-PLL-Van mediated mPCR assay for B. cereus in milk matrix samples achieved results similar to those of the pure culture. In addition, with a 6-h pre-enrichment of B. cereus that was spiked in milk matrix samples, the limit of detection reached 10¹ cfu/mL. The MB-PLL-Van mediated mPCR assay developed in this study could be used as a universal technology platform for the efficient enrichment and genotyping of gram-positive bacteria.

From hazard analysis to risk control using rapid methods in microbiology: A practical approach for the food industry

The prevention of foodborne diseases is one of the main objectives of health authorities. To this effect, analytical techniques to detect and/or quantify the microbiological contamination of foods prior to their release onto the market are required. Management and control of foodborne pathogens have generally been based on conventional detection methodologies, which are not only time-consuming and labor-intensive but also involve high consumable materials costs. However, this management perspective has changed over time given that the food industry requires efficient analytical methods that obtain rapid results. This review covers the historical context of traditional methods and their passage in time through to the latest developments in rapid methods and their implementation in the food sector. Improvements and limitations in the detection of the most relevant pathogens are discussed from a perspective applicable to the current situation in the food industry. Considering efforts that are being done and recent developments, rapid and accurate methods already used in the food industry will be also affordable and portable and offer connectivity in near future, which improves decision-making and safety throughout the food chain.

Review of Electrochemical DNA Biosensors for Detecting Food Borne Pathogens

The vital importance of rapid and accurate detection of food borne pathogens has driven the development of biosensor to prevent food borne illness outbreaks. Electrochemical DNA biosensors offer such merits as rapid response, high sensitivity, low cost, and ease of use. This review covers the following three aspects: food borne pathogens and conventional detection methods, the design and fabrication of electrochemical DNA biosensors and several techniques for improving sensitivity of biosensors. We highlight the main bioreceptors and immobilizing methods on sensing interface, electrochemical techniques, electrochemical indicators, nanotechnology, and nucleic acid-based amplification. Finally, in view of the existing shortcomings of electrochemical DNA biosensors in the field of food borne pathogen detection, we also predict and prospect future research focuses from the following five aspects: specific bioreceptors (improving specificity), nanomaterials (enhancing sensitivity), microfluidic chip technology (realizing automate operation), paper-based biosensors (reducing detection cost), and smartphones or other mobile devices (simplifying signal reading devices).