Persistent marine litter: small plastics and cigarette butts remain on beaches after organized beach cleanups

Coastal plastic pollution: A global perspective

Coastal ecosystems have ecological importance worldwide and require control and prevention measures to mitigate human pollution. The objective of this study was to perform a systematic review to provide a comprehensive overview of the global issue of coastal plastic pollution. 689 articles were eligible for qualitative synthesis and 31 were considered for quantitative analysis. There was an exponential increase in articles addressing coastal plastic pollution over the past 50 years. Studies were mainly carried out on beaches, and plastic bottles were the most found item, followed by cigarette butts. Polyethylene was the predominant plastic polymer, and white microplastic fragments stood out. China published most articles on the topic and Brazil had the highest number of sites sampled. Meta-analysis had significant effect sizes based on the reported data. These findings carry significant implications for environmental policies, waste management practices, and targeted awareness campaigns aimed at mitigating plastic pollution.

Assessing marine litter in a highly polluted area in the Mediterranean: A multi-perspective approach in the Saronikos Gulf, Greece

Marine litter poses a significant environmental challenge in the Saronikos Gulf, Greece. Employing an integrated approach, data from both beach and underwater sites were analyzed. The average litter density on beaches was 2.61 items m-2, with plastic being the most common material, notably small polystyrene fragments and cigarette butts. The western part of the Gulf exhibited higher litter density, mainly due to surface circulation patterns. Most beaches fell short of meeting Good Environmental Status criteria for marine litter. Higher litter densities were observed in autumn. Benthic litter density decreased with depth, being 23 times higher in shallower waters, with plastic being the predominant type. This extensive study offers crucial insights into the pollution status and litter distribution in the Saronikos Gulf, contributing significantly to the global understanding of marine litter distribution on coastal ecosystems. Such information is crucial for raising awareness, informing policy decisions, and driving environmental actions.

Exploring cigarette butts pollution in Saint Martin Island: A marine protected area

Saint Martin Island (SMI), the only coral island in Bangladesh, is located in the Bay of Bengal and has been identified as a marine protected area (MPA). Littering cigarette butts (CBs) waste in an ecologically sensitive environment can have numerous adverse effects. The purpose of this research is to investigate the abundance and density of CBs in SMI and to assess the pollution status using the Cigarette Butt Pollution Index (CBPI). This study is conducted based on the visual survey method in the three types of land use zones of SMI. During the peak season, the investigation was carried out from 9 a.m. to 5 p.m. in December 2023. A total of 4481 CBs item were counted, and the density ranged from 0.37 to 1.76 m-2 with an average value of 0.99 m-2 across 12 sampling campaigns. The highest density was observed at service zones, and the fishing zones had the lowest density. The calculated CBPI values revealed that 75 % of the sampling stations were in the "severe pollution" while 25 % were classified as "high pollution" status, underscoring the prevalence of hazardous CBs across most areas of SMI. To tackle these issues requires regulatory measures, public awareness initiatives, and community involvement. Effective waste management and eco-friendly product promotion can help reduce CBs pollution risks in marine protected islands.

Plastic pollution on Moroccan beaches: Toward baselines for large-scale assessment

In Africa, Morocco is the 10th largest producer of plastic. The severity of this plastic has attracted increasing amounts of attention in the Moroccan Atlantic and Mediterranean in recent years. However, at the national level, there is limited knowledge of plastic pollution. To obtain an exhaustive and comprehensive evaluation of plastic pollution levels in Morocco, large-scale monitoring is needed on all the coasts of the country. In this context, this paper examined the composition, abundance, distribution, source and quality of beaches on two Moroccan coasts using four beach quality indices along 29 beaches. During two seasons, a total of 72,105 items were counted. The mean litter abundance was 0.31 items/m2, and the Mediterranean beaches were more dense than the Atlantic beaches. In particular, litter density was greater in spring (0.35 items/m2) than in summer (0.29 items/m2). The data indicate considerable differences in the density of marine debris according to the seasonality, beach typology and presence of rivers. Hazardous litter items were collected along both Moroccan coasts, constituting 8.41 % of the total collected items, with a mean of 0.026 items/m2. The use of environmental indices allowed us to classify Moroccan beaches as "moderate cleanliness", "moderate abundance" of plastics, "moderately safe" presence of hazardous litter and "mediocre" environmental status. The findings of the present study indicate that the sources of litter on both Moroccan coasts come mainly from recreational activities and dumping. The waste management practices recommended for Moroccan beaches include reducing sources, mitigating mitigation measures and changing littering behavior.

Tracing beach litter sources: Drink lids tell a different story from their bottles

Water and soft drink bottles made from polyethylene terephthalate (PET) sink at sea unless they contain trapped air, whereas their lids are made from polymers that float and can drift long distances. We sampled loose lids and bottles at 21 South African beaches to compare their origins. The proportions of foreign-made bottles and lids were correlated, and increased away from urban centres, indicating that much land-based litter strands close to source areas. Over 80 % of foreign-made drink bottles and 90 % of lids came from Asia, but most bottles were manufactured in China, Malaysia-Singapore and the UAE, and were dumped from ships. By comparison, most loose lids were in poor condition after being carried across the Indian Ocean from Indonesia by the South Equatorial Current. Reducing PET drink bottles at sea requires enforcement of regulations banning dumping at sea, whereas reducing their lids requires better control of littering in source countries.

Spatio-temporal variation and ecological risk assessment of microplastics along the touristic beaches of a mediterranean coast transect (Valencia province, East Spain)

Annually, the Mediterranean region attracts around one-third of the global coastal tourism, which is acknowledged as a substantial contributor to plastic pollution. Coastal municipalities mitigate this through periodic sand and shore cleaning. However, the efficacy of these measures remains uncertain. In this study, the occurrence of MPs (10 μm-5 mm) in sand from seven different, regularly cleaned, touristic beaches of the coastline of Valencia province (E Spain) was assessed. Two different sampling campaigns were performed in winter and in summer (2022) to compare the results and understand the influence of the high touristic activity, as well as, the efficiency of the measures taken against MPs pollution. The methodology used was designed specifically for the matrix and employed density separation using a Sediment Microplastic Isolation (SMI) Unit. In addition to conventional visual inspection and ATR-FTIR, automatic quantification and identification of the polymers of lower size was performed by μFTIR. The average MPs concentration in the summer (339 ± 92 MP kg-1 by stereomicroscopy and 339 ± 189 MP kg-1 by μFTIR) was significantly higher than in the winter (71 ± 92 MP kg-1 and 143 ± 85 MP kg-1) (p < 0.05). The combination of these analytical tools provides comprehensive information about the MPs present in beach sand. Fibers were the most abundant form of MPs, while most of the polymers analyzed were polyethylene (PE) and halogenated polystyrene (Cl-PS and Br-PS) with food packaging, swimming equipment and fishing nets being their most probable sources. Ecological risk assessment was performed through the Pollution Load Index (PLI), the Hazardous Index (HI) and the Risk Quotient (RQ), with the results indicating potential risk that ranges from moderate to high depending on the applied approach.

Citizen scientists study beach litter along 12,000 km of the East Pacific coast: A baseline for the International Plastic Treaty

Anthropogenic Marine Litter (AML) accumulating on beaches causes damage to coastal ecosystems and high costs to local communities. Volunteers sampled AML on 130 beaches along the central and southern East Pacific coasts, with AML densities ranging from 0.46 to 2.26 items m-2 in the different countries. AML composition was dominated by plastics and cigarette butts, the latter especially in Mexico and Chile. The accumulation of AML in the upper zones of the beaches and substantial proportions of cigarette butts, glass and metal pointed mainly to local sources. Statistical modelling of litter sources on continental beaches revealed that tourism, access and related infrastructure (e.g. parking lots) best explained AML densities, while plastic densities were also influenced by the distance from river mouths and national Gross Domestic Product. Large-scale monitoring can be a useful tool to evaluate the effectiveness of public policies that should primarily focus on land sources.

Abundance and distribution of cigarette butts on the sand of five touristic beaches in Latin America during the COVID-19 pandemic

Cigarette butts (CB) and cigarette butt fibers (CBF) are highly abundant and frequent residues on beach sand. Also, they are hazardous waste due to their significant toxicity and potential risk to the ecosystems' biota and the health of beach tourists. This study aimed to determine the abundance and density of CB and CBF found on the active, rest, and service zones of five pilot beaches in Argentina, Colombia, Brazil, Ecuador, and Mexico. The methodology involved collecting CB and CBF in 500 m2 transects of urban tourist beaches using a citizen science-adapted methodology between June 2021 and May 2022, during the COVID-19 pandemic. The abundance and density of CB and CBF, and the Cigarette Butt Pollution Index (CBPI) were calculated. The highest proportion of CB was found in service and rest areas. Bocagrande (CO) reported the highest generation of CB and CBF and a severe CBPI.

Macro- and microplastic abundance from recreational beaches along the South Aegean Sea (Türkiye)

This study aimed to evaluate the abundance and diversity of macro- and microplastics in sand samples collected during summer and winter from eight different beaches used for recreational purposes located on the South Aegean coasts of Türkiye. According to the results, microplastic in fiber shape was dominant on all the beaches. The highest microplastic abundance was determined at Ölüdeniz Kumburnu Beach (360.00 ± 237.66 particles kg-1 dw) in summer and at Aktur Beach (358.33 ± 397.24 particles kg-1 dw) in winter. A significant positive correlation was found in the winter between microplastic amounts and wind speed. The study area is an important touristic center faraway from major cities and industrial areas. Thus, plastic pollution in this area may be the result of tourism activities in the summer, discharge waters from wastewater treatment plants or transportation by meteorological factors (like waves, wind or river flows).

Spatio-temporal distribution of cigarette butt contamination in urban beaches with varying levels of use

This study assessed the extent of cigarette butt contamination on two urban beaches in Recife-PE (Pernambuco State, Brazil) with varying levels of use. The study considered degradation levels and evaluated whether the brands varied by time, space, and beaches use. Ten transects (1.5 m wide) and spaced 10 m apart, were delimited on the beaches investigated. Twelve collections were made between May 2021 and January 2022, and the collected cigarette butts were evaluated based on degradation level, mass, size, and brand. In total, 10,275 cigarette butts were collected on both beaches, with P1 accounting for 96.91% of the found cigarette butts. The density of cigarette butts on the beaches was directly proportional to the level of use, with 8.85 butts/m2 in P1 and 1.05 butts/m2 in P2. Eighteen brands were identified, with brand (A) being the most popular regardless of the area. Significant differences (p ≤ 0.05) were found when evaluating the amount of butts/m2; Sundays with high precipitation presented reduced values of butts; more occupied areas presented transects with higher amounts; abundance in the summer; morphometry with higher values recorded in newly discarded butts; predominance of more degraded butts and brand diversity. Despite the difference in the number of butts/m2 between the areas, it was possible to identify that their abundance is very expressive, and that the monitored beaches present a high exposure to the contaminant.

A comprehensive review on triple R eco-management strategies to reduce, reuse and recycle of hazardous cigarette butts

Cigarettes are the globally consumed product that contributes to public health problems and is the source of the most prevalent form of litter in the world, Cigarette butts. Cigarette butts are a major source 4000 toxic chemicals, affecting the health of wildlife, humans, and the environment and their decomposition can take years due to the resistance of cellulose acetate to bacterial and fungal degradation. In 2016, the world production of cigarettes exceeded 5.7 trillion, with the majority of them consisting of cellulose acetate filters. Consequently, a massive amount of hazardous waste leaches out in the environment. Incineration and landfilling are methods of disposal, but they can result in the emission of harmful fumes and be costly. To combat this environmental issue, researchers have explored the recycling of cigarette butts in various materials, including asphalt concrete, fired clay bricks, and as a carbon source, among others. Various approaches can be used to reduce cigarette butts pollution, but efficient collection logistics by consumers remains a crucial factor for successful recycling. This paper provides innovative solutions to mitigate the cigarette butts litter problem and the feasibility of recycling methods. Despite recent progress in cigarette butts recycling solutions, there is still much room for research in this area.

Time to kick the butt of the most common litter item in the world: Ban cigarette filters

Cigarette filters offer no public health benefits, are single-use plastics (cellulose acetate) and are routinely littered. Filters account for a significant proportion of plastic litter worldwide, requiring considerable public funds to remove, and are a source of microplastics. Used cigarette filters can leech toxic chemicals and pose an ecological risk to both terrestrial and aquatic ecosystems. Bottom-up measures, such as focusing on consumer behaviour, are ineffective and we need to impose top-down solutions (i.e., bans) if we are to reduce the prevalence of this number one litter item. Banning filters offers numerous ecological, socioeconomic, and public health benefits.

Marine beach litter monitoring strategies along Mediterranean coasts. A methodological review

Marine beach litter (MBL) represents a serious issue for marine life, coastal ecosystems, human health and several economical activities. The Mediterranean Sea is a semi enclosed basin particularly vulnerable to this problem. Its coasts are threatened by critical anthropogenic pressures that sum up with intensive fishing and shipping, and the slow turnover of its waters. In the last decades, several scientific and participative initiatives have been conducted to study, monitor and clean-up shorelines. These studies were generally characterized by differences in timing and frequency of the surveys, as well as in litter sampling, classification and analysis. This paper presents a systematic review of current literature concerning MBL monitoring strategies along the Mediterranean coasts. Scopus indexed studies are analysed to identify discrepancies and similarities among the applied protocols, understand where current gaps lie, and point out what would be needed to develop a basin-scale efficient monitoring for the Mediterranean Sea.

Toward a sustainable circular economy for cigarette butts, the most common waste worldwide on the coast

The circular economy is based on the maximum use of resources by reducing, reusing, and recycling the elements used. Currently, the items littered most frequently in the world are cigarettes butts (CB) as these debris are freely disseminated in the marine habitat, they are generally difficult to collect and very complex to recycle. Litter CB is a great social problem that generates excessive economic costs and serious environmental problems. CB is also not biodegradable and highly toxic to marine organisms and presents a distinctive mixture of physical and chemical contamination. However, little research has been done on the management and recycling of this dangerous waste. Several proposals have been made to incorporate this waste into high-volume articles of direct production or recycling, but collection logistics are lacking since the current system is inefficient, in addition to the poor environmental behaviour of citizens. This work presents a current synthesis of the CB problem from all its possible aspects in order to have a global vision of the life cycle of the CB, indicating both the known and the gaps in the knowledge of each of them, and intends to give a general outline of the steps to follow to try to end such a worrying problem at the global level.

Microplastic distribution and composition on two Galápagos island beaches, Ecuador: Verifying the use of citizen science derived data in long-term monitoring

Monitoring beach plastic contamination across space and time is necessary for understanding its sources and ecological effects, and for guiding mitigation. This is logistically and financially challenging, especially for microplastics. Citizen science represents an option for sampling accessible sites to support long term monitoring, but challenges persist around data validation. Here we test a simple citizen science methodology to monitor visible microplastic contamination on sandy beaches using a standard quadrat unit (50 cm × 50 cm x 5 cm depth) sieved to 1 mm, to support the analysis of microplastic on two islands within the marine protected area of the Galápagos Archipelago, Ecuador (San Cristóbal and Santa Cruz islands). High school and university students undertook supervised sampling of two beaches in 2019-2020 collecting over 7000 particles. A sub-sample of the suspected microplastics collected (n = 2,213, ∼30% total) were analysed using FTIR spectrometry, confirming 93% of particles >1 mm visually identified by students were microplastics or rubber, validating this method as a crowd-sourced indicator for microplastic contamination. These data provide important insights into the plastic contamination of Galápagos, revealing plastic abundances of 0-2524 particles m^-2 over the two beaches (the highest reported in Galápagos). Strong accumulation gradients were measured parallel to the waterline at Punta Pitt (San Cristobal island) and perpendicular to the waterline at Tortuga Bay (Santa Cruz island), where four-fold higher concentrations were recorded at the sea turtle nesting habitat on the back-beach dune. No significant seasonal trends were measured during one year. These results demonstrate the value of citizen science in filling spatiotemporal knowledge gaps of beach contamination to support intervention design and conservation.

Spatio-temporal variation and seasonal dynamics of stranded beach anthropogenic debris on Indonesian beach from the results of nationwide monitoring

The first stranded macrodebris study on a national scale in Indonesia was conducted on 18 beaches from February 2018 to December 2019. The average weight and abundance of beach debris were higher between October and February (rainy season). The highest stranded macrodebris was located in Ambon, Manado, Takalar, and Padang. Plastic (46.38 %) was the most prevalent type of debris across all macrodebris categories, with single-use plastics such as plastic sachets, plastic bags, and plastic bottles being the dominant macroplastic debris (64.64 %). Based on CCI, HII, and BGI, 18 beaches are "moderately clean," with few hazardous items observed, and "Good." This anthropogenic macrodebris is thought to be more localized (55 %) than transboundary macrodebris. Litter control and environmental quality of this Indonesian coastal region should be improved through a proactive and flexible approach. Finally, extensive stranded beach debris monitoring is recommended to better understand the distribution of macrodebris in the region.

Exploring Scientific Discourse on Marine Litter in Europe: Review of Sources, Causes and Solutions

Marine litter is a transboundary environmental issue that affects all the world’s oceans. Marine litter research is a young discipline but one that has exploded during the last five years. However, the increased knowledge of sources and underlying causes to marine litter, as well as knowledge regarding solutions, lack systematic review and synthesis. This study reviews the scientific discourses around plastic marine litter in Europe, and more specifically, in Norway and Denmark, and explores emerging discourse coalitions. Four main thematic storylines on the source-cause-solution causal relationship, as well as two emerging storylines within marine litter research, are found. This study concludes that in order to secure sustainability of solutions and to avoid risk transformation and greenwashing, more interdisciplinary research, including life cycle assessment and investigations of scientific and societal discourses, is needed.

Spatio-temporal variations of litter on Qingdao tourist beaches in China

Beaches are an integral part of coastal tourism, but they are deteriorated by the beachgoers and recreational activities due to lack of adequate beach environmental awareness and management. Litter is widely distributed in marine and coastal environment and has been considered a severe concern. In China investigations to determine the beach litter abundance and pollution level are limited. The aim of this study is to estimate spatio-temporal distribution and composition of litter on 10 well-known Qingdao tourist beaches, involving pollution level by beach quality indexes. Beach litter was collected within an area of 25 × 25 m² in both summer (May, June and July) and winter (Nov, Dec and Jan) seasons, and was classified into eight categories. The abundance of beach litter was found higher in summer (0.13 ± 0.04 items/m²) than in winter (0.04 ± 0.01 items/m²). Overall, the percentage of plastics were higher in both summer (23.48%) and winter (24.04%) than that of other litter categories. Based on Clean Coast Index, 70% of beaches were very clean, 25% clean, and 5% moderately clean. Beach Grade Index showed that 15% beaches were very good, 5% good, 55% fair, and 25% poor. 85% beaches constituted some quantity of hazardous litter and 15% had no hazardous litter for Hazardous Items index. The findings suggest that the sources of beach litter along Qingdao beaches mainly come from the recreational and tourist activities. The substantial quantity of litter is also being transported by ocean (tides or current), which are finally deposited along beachfront. Despite regular cleaning operation along most of Qingdao beaches, suggested management practices involve mitigation measures, source reduction, change in littering behavior to improve further quality of beaches.

A rapid assessment technique for coastal plastic debris sampling: Applications for remote regions and community science

Marine debris is an environmental issue of increasing importance worldwide, with 80% of marine plastics estimated to originate from land-based sources. While much work has been conducted to quantify plastics in coastal environments, many of these approaches are site-specific and not amenable to rapid surveys. We surveyed beaches around Nova Scotia, Canada for plastic and other anthropogenic debris to: 1) quantify debris density on the high tide line; and 2) test a rapid survey technique using digital photos, with applications for community science and remote regions. Most (72%) beaches in Nova Scotia contained debris, but plastic densities along the daily high tide line were relatively low (mean 0.2 debris/m²) with little interannual variation. Despite small differences in plastic densities between observers, this rapid assessment technique appears viable for relative quantification and monitoring of plastic debris on beaches across large geographic scales to assess trends and sources.

Seasonal and geographic variations of marine litter: A comprehensive study from the island of Cyprus

Twenty beaches located around the island of Cyprus, in the eastern Mediterranean, were identified as monitoring sites. They were monitored over four monitoring sessions from January to September 2021 to assess marine litter amounts, categories, and spatiotemporal distribution. A total of 42,499 marine litter items were collected. The average marine litter density was 0.19 items/m². Most of the collected items were plastics, with single-use plastics being ubiquitous. Plastic fragments >2.5 cm made a significant proportion of the plastic litter collected, particularly in the northern coasts of the island. Cigarette butts were abundant on touristic beaches, especially in the tourism period. The study identifies significant temporal and spatial variations in the abundance and distribution of marine litter, as well as variations related to waste management or lack thereof.

(Micro)plastics: A possible criterion for beach certification with a focus on the Blue Flag Award

On the one hand, environmental certifications like the Blue Flag award (BFA) are well-known globally for its role in beach management and tourism attraction. Plastic pollution like microplastics, on the other hand, has become a global concern due to their increasing persistence and negative environmental repercussions. This paper examines and discusses the factors that would lead to (micro)plastics being included to the BFA as a criterion. Thereby, we attempt to maximize BFA's potential as a tool for better understanding (micro)plastics on beaches and implementing strategies to reduce them. The anticipated primary benefits are: 1) knowing the degree of litter disposal and microplastic contamination, 2) conducting close monitoring, 3) having an accessible database for numerous coastlines throughout the world, 4) evaluating management strategies and making improvements, 5) assisting in long-term research, 6) having a responsible entity in charge of issue decision-making, and 7) a larger public/scientific outreach.

Message in a bottle: Assessing the sources and origins of beach litter to tackle marine pollution

Beaches are key attractions for tourism and recreation, and considerable effort is made to keep beaches clean, yet many beaches still have substantial litter loads. Lasting solutions to reduce the amounts of marine litter require an understanding of litter sources. We collected bottles and other single-use containers at 32 sites around the South African coast to infer their sources based on their age and country of manufacture. Bottle densities varied greatly among beaches (8-450 bottles·km^-1), depending on proximity to local urban centres and beach cleaning frequency. Most bottles were plastic, despite well-developed recycling initiatives for PET and HDPE bottles in South Africa. Street litter was dominated by bottles made in South Africa (99%), but foreign-manufactured bottles comprised up to 74% of bottles at some beaches, with an increase from urban (4%) through semi-urban (24%) to remote beaches (45%). Most foreign bottles were PET drink bottles from China and other Asian countries, followed by South America and Europe, with little regional variation in the contribution from these sources. This fact, coupled with their recent manufacture dates (mainly <2 years old), indicates that most foreign PET drink bottles are dumped illegally from ships. By comparison, foreign HDPE bottles were more common along the southeast coast of South Africa than along the west coast, consistent with many of these bottles arriving by long-distance drift across the Indian Ocean from southeast Asia. The most common country of origin for these bottles was Indonesia, and most newly-arrived HDPE bottles were 4-6 years old. To tackle beach litter in South Africa we need to greatly reduce plastic leakage from land-based sources, both locally and in southeast Asia, as well as improve measures to prevent the illegal dumping of plastics and other persistent wastes from ships.

Smoked cigarette butts: Unignorable source for environmental microplastic fibers

The pollution of microplastics and their potential environmental hazards have attracted considerable attention of the public. Cigarette butts, composed of cellulose acetate, are one of the most common plastic pollutants in the environment. Of all the litter that is discarded at will, cigarette butts are the most acceptable. Cigarette butts are dangerous pieces of plastic, but are usually not handled properly and consist of more than 15,000 detachable strands of plastic fiber. Discarded cigarette butts may be carried into rivers and lakes, and finally into the ocean. The plastic fibers will continuously release microplastic fibers into the environment. About 300,000 tons of potential microplastic fibers may enter the aquatic environment from this source per annum. Additionally, toxic substances, such as nicotine, carcinogenic tar, and polycyclic aromatic hydrocarbons, have strong toxic effect, which will cause serious damage to aquatic organisms. However, the mechanism and rate of microplastic fibers release from smoked cigarette butts and the joint toxicity of microplastic fibers and toxic pollutants to aquatic organisms are still in the initial stage. Therefore, it is necessary to understand the mechanism of cigarette butts releasing microplastic fibers, the potential impact on the environment and possible measures to reduce the impacts of cigarette butt litter. The aim of this paper is to evaluate the potential sources of smoked cigarette butts as environmental fiber microplastics and the potential ecological effects of the released microplastic fibers on the ecosystem. In addition, some ways which could help to tackle problem of smoked cigarette butts pollution have also been proposed.

Use of Sediqualsoft® to Determine the Toxicity of Cigarette Butts to Marine Species: A Weather Simulation Test

Cigarette butts (CBs) are among the dominant constituents of marine and beach litter. Few studies have been conducted, and the environmental effects of CBs on marine species are still poorly understood. This study aims to evaluate the ecotoxicological effects on marine organisms of both classic and electronic CBs. Three representative species of different trophic levels in marine ecosystems (Aliivibrio fischeri, bacteria; Phaeodactylum tricornutum, algae, primary producers; Paracentrotus lividus, echinoderms, consumers) were tested. The effects of natural ageing of CBs due to exposure to atmospheric conditions (natural sunlight vs. simulated rain) and for different times (1 vs. 2 weeks) were evaluated. The results were weighted together to obtain a synthetic hazard level to the environment (Class of Hazard) from Sediqualsoft®. Classic CBs (CCBs) performed the worst and posed a mild to moderate risk compared to electronic CBs (absent Class of Hazard). Smoked classic CBs posed a higher environmental risk than unsmoked. The highest risk was produced by classic CBs after one week of exposure in dry weather. Echinoderms and the body size reduction in normo-formed (72 h) plutei were shown to be the more sensitive organism and endpoint, respectively. We recommend the use of Sediqualsoft® software for risk assessment studies of sediments contaminated with contaminants of various types, especially in conjunction with a weight of evidence approach (WOE).

Effects of cigarette butts on marine keystone species (Ulva lactuca L. and Mytilus edulis L.) and sediment microphytobenthos

Outdoor mesocosms with constantly flowing natural seawater were used to test the effects of littered cigarette butts on the filter feeder Mytilus edulis (blue mussel), the macroalga, Ulva lactuca (sea lettuce) and sediment microphytobenthos in a semi-natural marine setting. Either conventional, cellulose acetate, or biodegradable, cellulose, smoked cigarette butts were added at densities of 0.25 or 1 butt L^-1. The clearance rates of mussels exposed to 1 butt L^-1 of cellulose acetate butts were three times less than the controls. The growth of U. lactuca was not measurably affected by cigarette butts, however the sediment chlorophyll content was significantly less in mesocosms exposed to 0.25 and 1 butt L^-1 of cellulose acetate butts. These effects occurred despite constant replacement of seawater indicating how hazardous conventional cigarette butts are to marine life. Biodegradable cellulose cigarette butts had minimal effects on the measured variables but should still not be discarded as litter.

Toxicity of cigarette butts and possible recycling solutions-a literature review

Tobacco is a worldwide-consumed product, which in addition to causing public health-related issues is responsible for the most common form of litter in the world-smoked cigarette butts (CBs). A large attention has been drawn to this question, since this specific waste type tends to end up in terrestrial and aquatic ecosystems, posing serious threat to a range of life forms. Decomposition may take several years to occur because cellulose acetate is hardly accessible, before deacetylation, by bacteria and fungi. This review concerns the toxicity derived from smoked cigarette butts, as well as innovative ecological solutions for solving the CB litter problem. Toxicity studies have demonstrated the critical influence of chemicals present in smoked CBs to the environment as a whole, but also the physical contaminating potential considering micro- and nanoparticles derived from CB material. Nevertheless, several technological approaches were aimed at unveiling hidden value within used CBs, as well as propositions for incorporation of this residue in large volume production items or direct recycling. In summary, several methods are available to alleviate CB pollution, while appropriate and efficient collection logistics by consumers appears as the main bottleneck for an effective recycling. It is also clear that while considerable progress has been made recently in light of CB recycling solutions, there is still a vast research capacity in this regard.

Abundance and Distribution of Cigarette Butts on Coastal Environments: Examples from Southern Spain

Litter on beaches is one of the most difficult problems in coastal management and every year, much efforts and public money are invested to try to alleviate and solve the problem. Cigarette butts (CB) are among the most widespread abandoned personal items in the world. In Spain, they are found on all types of beaches, where they are discarded by beach users; however, rivers and streams can also deposit CB on shores. This paper analyses the abundance of CB on different beaches in Southern Spain in order to address and better understand this relevant environmental problem and propose sound solutions to decrease or eliminate their presence. The main factors favouring CB accumulation were identified, namely the seasonality and number of beach users, beach typology (remote, rural, village or urban sites), type of beach sediment and methods and frequency of cleaning operations. Mean and median CB abundance values per 100 m of beach length, calculated from all the data used in this study, were 159 and 68 items, respectively. The largest number of CB were observed at urban sites, followed by village, rural and remote beaches. Further, sand beaches registered higher values of CB than cobble or pebble beaches.

Cigarette butts on Baltic Sea beaches: Monitoring, pollution and mitigation measures

OSPAR, Rake and Flood accumulation zone methods were applied at 29 beaches of the German and Lithuanian Baltic Sea coast (2011-2018) to monitor cigarette butt pollution. Also, butt pollution prevention measure - ballot bin, was tested. The number of cigarette butts was significantly higher in Germany than in Lithuania, but the percent of butts from total litter items was similar. Rake method turned out to be suitable for cigarette butt assessment, while the OSPAR method underestimates the butt pollution. The visitor number on the beach had a significant effect on the cigarette butt number: in remote beaches, without visitors, usually, no butts were observed, while the highest number and the percent of butts were observed in beaches with the highest number of visitors. The ballot bin campaign may have increased the public awareness about pollution, but turned out to be in-efficient in reducing it.

The fate of cigarette butts in different environments: Decay rate, chemical changes and ecotoxicity revealed by a 5-years decomposition experiment

Cigarette butts (CBs) are the most common litter item on Earth but no long-term studies evaluate their fate and ecological effects. Here, the role of nitrogen (N) availability and microbiome composition on CBs decomposition were investigated by a 5-years experiment carried out without soil, in park grassland and sand dune. During decomposition, CBs chemical changes was assessed by both ¹³C CPMAS NMR and LC-MS, physical structure by scanning electron microscope and ecotoxicity by Aliivibrio fischeri and Raphidocelis subcapitata. Microbiota was investigated by high-throughput sequencing of bacterial and eukaryotic rRNA gene markers. CBs followed a three-step decomposition process: at the early stage (∼30 days) CBs lost ∼15.2% of their mass. During the subsequent two years CBs decomposed very slowly, taking thereafter different trajectories depending on N availability and microbiome composition. Without soil CBs showed minor chemical and morphological changes. Over grassland soil a consistent N transfer occurs that, after de-acetylation, promote CBs transformation into an amorphous material rich in aliphatic compounds. In sand dune we found a rich fungal microbiota able to decompose CBs, even before the occurrence of de-acetylation. CBs ecotoxicity was highest immediately after smoking. However, for R. subcapitata toxicity remained high after two and five years of decomposition.

Microplastics in the environment: A DPSIR analysis with focus on the responses

This review organizes key information about microplastic pollution through a DPSIR (driving forces, pressures, states, impacts and responses) analysis, namely the current knowledge on the sources of microplastics in the environment, the abundance, mobility and fate of microplastics distributed across the different environmental compartments, as well as their socio-economic and environmental impacts. The available or developing upstream and downstream responses to the microplastic pollution are also reviewed as part of the DPSIR analysis. These include the regulatory and policy instruments, environmental education campaigns, product design, the development of biodegradable plastics, environmental cleanups, waste management, drinking water and wastewater treatment plants, and other treatment technologies and processes. Whenever possible, the current trends and discerning gaps in the research conducted so far by the scientific community are identified, giving some clues to what is going to be the future research on this topic and into new lines of research.

Littered cigarette butt as a well-known hazardous waste: A comprehensive systematic review

Most of cigarettes used in the world have filters. Following smoking, the cigarette butts (CBs) are often littered as wastes in the environment. CBs generally contain several toxic substances that are trapped in the cigarette filter. Filters are made of non-biodegradable materials and remain in the environment for a long time. Within this study, it is attempted to systematically review the articles on CBs and find out the answers to the problems associated with the factors including quantity, distribution, origin and toxicity of CBs in the environment. It is estimated that approximately 5.5 trillion cigarettes are being produced annually in the world and the CB wastes would reach 1.2 million tons and increase by 50% until 2025. CBs contain thousands of dangerous chemicals such as arsenic, benzene, hydrogen cyanide, PAHs, pyridine, heavy metals and so forth. It is also believed that eachCB can pollute 1000 liters of water. Given the inadequacy of mechanical equipment as well as the cost of collecting these wastes, there should be a special focus on these items as follows: producing cigarettes with degradable filters, reducing the rate of smoking in the world, reducing the toxic and chemical substances in the process of plant growth, processing and production of cigarettes, training people to discard CBs properly, putting legal and financial pressures on cigarettes production, and the last but not least, providing effective solutions for collecting CBs.

To clean or not to clean? A critical review of beach cleaning methods and impacts

Cleaning is a fundamental concern of beach managers in many destinations as well as an important requirement in beach quality awards. However, it has been largely neglected in the literature. This paper provides an overview of empirical studies on beach cleaning and analyzes cleaning-related requirements of 11 beach awards that generate controversy in the literature. This study comments on key aspects of beach cleaning, resolves various misconceptions, and provides new perspectives by integrating related topics drawn from a wide range of literature. The arguments based on both the ecological and tourism managerial perspectives are presented, indicating the gaps and proposing research solutions. The paper calls for empirical studies with regard to the efficiency of different cleaning approaches on beaches with varying levels of use intensity and for methodological designs that separate the impacts of mechanical grooming from those of trampling, dune destruction, shore armoring, artificial lighting, among others.