Stability and release of antiviral drugs from ethylene vinyl acetate (EVA) copolymer

3D-Printed EVA Devices for Antiviral Delivery and Herpes Virus Control in Genital Infection

Herpes viruses are widespread in the human population and can cause many different diseases. Genital herpes is common and can increase the risk of HIV infection and neonatal herpes. Acyclovir is the most used drug for herpes treatment; however, it presents some disadvantages due to its poor oral bioavailability. In this study, some ethylene vinyl acetate devices with different acyclovir amounts (0, 10, and 20 wt.%) were manufactured by fused filament fabrication in two different geometries, an intrauterine device, and an intravaginal ring. Thermal analyses suggested that the crystallinity of EVA decreased up to 8% for the sample loaded with 20 wt.% of acyclovir. DSC, SEM, and FTIR analyses confirmed that the drug was successfully incorporated into the EVA matrix. Moreover, the drug release tests suggested a burst release during the first 24 h followed by a slower release rate sustained up to 80 days. Biological assays showed the biocompatibility of the EVA/ACV device, as well as a 99% reduction in vitro replication of HSV-1. Finally, the EVA presented a suitable performance for 3D printing manufacturing that can contribute to developing personalized solutions for long-term herpes treatment.

A novel, low cost, and accessible method for rapid fabrication of the modifiable microfluidic devices

As microfluidic chips are evolving to become a significant analysis tool toward POCT devices, it is crucial to make the cost and the time required for the fabrication process of these chips as low as possible. Because of the multidisciplinary nature of these systems and the collaboration of many different laboratories and organizations from vastly various fields with unequal types of equipment, it is essential to develop new techniques and materials to make the integration of disparate systems together more straightforward, accessible, and economical. In this paper, we present ethylene–vinyl acetate (EVA) as a new polymer-based material for the fabrication of different microfluidic chips, which brings new features and tools in fabrication, integration, and functionality of microfluidic systems. We put this material next to PDMS for comparison between various aspects of these materials. We have shown that besides the low-cost ability, ubiquitousness, geometrical modifiability, and ease of fabrication of EVA chips, due the lower hydrophobicity and lower terahertz (THz) absorption of EVA than PDMS, EVA chips, in comparison to PDMS counterparts, can work faster, have less number of channel blocking and can be used in THz biosensing application like metamaterial-based cancer detection. Finally, several devices are made using EVA to demonstrate the functionality and versatility of this material for the fabrication of microfluidic chips.

Elongation of Axon Extension for Human iPSC-Derived Retinal Ganglion Cells by a Nano-Imprinted Scaffold

Optic neuropathies, such as glaucoma and Leber's hereditary optic neuropathy (LHON) lead to retinal ganglion cell (RGC) loss and therefore motivate the application of transplantation technique into disease therapy. However, it is a challenge to direct the transplanted optic nerve axons to the correct location of the retina. The use of appropriate scaffold can promote the proper axon growth. Recently, biocompatible materials have been integrated into the medical field, such as tissue engineering and reconstruction of damaged tissues or organs. We, herein, utilized nano-imprinting to create a scaffold mimicking the in vitro tissue microarchitecture, and guiding the axonal growth and orientation of the RGCs. We observed that the robust, long, and organized axons of human induced pluripotent stem cell (iPSC)-derived RGCs projected axially along the scaffold grooves. The RGCs grown on the scaffold expressed the specific neuronal biomarkers indicating their proper functionality. Thus, based on our in vitro culture system, this device can be useful for the neurophysiological analysis and transplantation for ophthalmic neuropathy treatment.

Polymeric micelles for acyclovir drug delivery

Polymeric prodrug micelles for delivery of acyclovir (ACV) were synthesized. First, ACV was used directly to initiate ring-opening polymerization of ɛ-caprolactone to form ACV-polycaprolactone (ACV-PCL). Through conjugation of hydrophobic ACV-PCL with hydrophilic methoxy poly(ethylene glycol) (MPEG) or chitosan, polymeric micelles for drug delivery were formed. (1)H NMR, FTIR, and gel permeation chromatography were employed to show successful conjugation of MPEG or chitosan to hydrophobic ACV-PCL. Through dynamic light scattering, zeta potential analysis, transmission electron microscopy, and critical micelle concentration (CMC), the synthesized ACV-tagged polymeric micelles were characterized. It was found that the average size of the polymeric micelles was under 200nm and the CMCs of ACV-PCL-MPEG and ACV-PCL-chitosan were 2.0mgL(-1) and 6.6mgL(-1), respectively. The drug release kinetics of ACV was investigated and cytotoxicity assay demonstrates that ACV-tagged polymeric micelles were non-toxic.

Conformational analysis, molecular structure and solid state simulation of the antiviral drug acyclovir (zovirax) using density functional theory methods

The five tautomers of the drug acyclovir (ACV) were determined and optimised at the MP2 and B3LYP quantum chemical levels of theory. The stability of the tautomers was correlated with different parameters. On the most stable tautomer N1 was carried out a comprehensive conformational analysis, and the whole conformational parameters (R, β, Φ, φ1, φ2, φ3, φ4, φ5) were studied as well as the NBO Natural atomic charges. The calculations were carried out with full relaxation of all geometrical parameters. The search located at least 78 stable structures within 8.5 kcal/mol electronic energy range of the global minimum, and classified in two groups according to the positive or negative value of the torsional angle j1. In the nitrogen atoms and in the O2' and O5' oxygen atoms of the most stable conformer appear a higher reactivity than in the natural nucleoside deoxyguanosine. The solid state was simulated through a dimer and tetramer forms and the structural parameters were compared with the X-ray crystal data available. Several general conclusions were emphasized.

Engineering antiphagocytic biomimetic drug carriers

Drug-delivery carriers have the potential to not only treat but also diagnose many diseases; however, they still lack the complexity of natural-particulate systems. Cell-based therapies using tumor-targeting T cells and tumor-homing mesenchymal stem cells have given researchers a means to exploit the characteristics exhibited by innate-biological entities. Similarly, immune evasion by pathogens has inspired the development of natural polymers to cloak drug carriers. The 'marker-of-self' CD47 protein, which is found ubiquitously on mammalian cell surfaces, has been used for evading phagocyte clearance of drug carriers. This review will focus on the recent progress of drug carriers co-opting the tricks that cells in nature use to hide safely under the radar of the body's innate immune system.

Acyclovir delivery systems

Herpes viruses (herpes simplex, varicella zoster, cytomegalovirus) are the main cause of a wide variety of human infections. Although the development of successful antiviral agents against infections caused by herpes viruses had been slow until the last decade, the production of delivery systems for acyclovir are a promising alternative. The present review summarizes the principal advances made in developing carriers for the delivery of acyclovir by different routes of administration.

Foreign body giant cell formation is preceded by lamellipodia formation and can be attenuated by inhibition of Rac1 activation

Macrophages that are recruited to the site of implanted biomaterials undergo fusion to form surface-damaging foreign body giant cells. Exposure of peripheral blood monocytes to interleukin-4 can recapitulate the fusion process in vitro. In this study, we used interleukin-4 to induce multinucleation of murine bone marrow-derived macrophages and observed changes in cell shape, including elongation and lamellipodia formation, before fusion. Because cytoskeletal rearrangements are regulated by small GTPases, we examined the effects of inhibitors of Rho kinase (Y-32885) and Rac activation (NSC23766) on fusion. Y-32885 did not prevent cytoskeletal changes or fusion but limited the extent of multinucleation. NSC23766, on the other hand, inhibited lamellipodia formation and fusion in a dose-dependent manner. In addition, we found that in control cells, these changes were preceded by Rac1 activation. However, NSC23766 did not block the uptake of polystyrene microspheres. Likewise, short interfering RNA knockdown of Rac1 limited fusion without limiting phagocytosis. Thus, phagocytosis and fusion can be partially decoupled based on their susceptibility to NSC23766. Furthermore, poly(ethylene-co-vinyl acetate) scaffolds containing NSC23766 attenuated foreign body giant cell formation in vivo. These observations suggest that targeting Rac1 activation could protect biomaterials without compromising the ability of macrophages to perform beneficial phagocytic functions at implantation sites.

Effects of solubilizing surfactants and loading of antiviral, antimicrobial, and antifungal drugs on their release rates from ethylene vinyl acetate copolymer

OBJECTIVES

This study investigates the effects of surfactants and drug loading on the drug release rate from ethylene vinyl acetate (EVA) copolymer. The release rate of nystatin from EVA was studied with addition of non-ionic surfactants Tween 60 and Cremophor RH 40. In addition, the effect of increasing drug load on the release rates of nystatin, chlorhexidine diacetate and acyclovir is also presented.

METHOD

Polymer casting solutions were prepared by stirring EVA copolymer and nystatin (2.5wt.%) in dichloromethane. Nystatin and surfactants were added in ratios of (1:1), (1:2) and (1:3). Drug loading was studied with 2.5, 5.0, 7.5, and 10.0wt.% proportions of nystatin, chlorhexidine diacetate and acyclovir incorporated into a separate polymer. Three drug loaded polymer square films (3cmx3cmx0.08cm) were cut from dry films to follow the kinetics of drug release at 37 degrees C. Ten milliliters of either distilled water or PBS was used as the extracting medium that was replaced daily. PBS was used for nystatin release with addition of surfactants and water was used for the study on drug loading and surfactant release. The rate of drug release was measured by UV-spectrophotometer. The amount of surfactant released was determined by HPLC.

RESULTS

The release of nystatin was low in PBS and its release rate increased with the addition of surfactants. Also, increasing surfactant concentrations resulted in increased drug release rates. The release rates of chlorhexidine diacetate (p<0.0001), acyclovir (p<0.0003) and nystatin (p<0.0017) linearly increased with increasing drug loads. The amount of surfactants released was above the CMC.

SIGNIFICANCE

This study demonstrates that the three therapeutic agents show a sustained rate of drug release from EVA copolymer over extended periods of time. Nystatin release in PBS is low owing to its poor solubility. Its release rate is enhanced by addition of surfactants and increasing the drug load as well.