Physico-chemical and in vitro biological evaluation of strontium/calcium silicophosphate glass

Ionic Dissolution Products of Lithium-, Strontium-, and Boron-Substituted Silicate Glasses Influence the Viability and Proliferation of Adipose Stromal Cells, Fibroblasts, Urothelial and Endothelial Cells

While bioactive glasses (BaGs) have been studied mainly for bone applications, studies have also shown their potential for soft tissue engineering. Incorporating therapeutic ions, such as lithium (Li+), strontium (Sr2+), and boron (B3+) into the BaGs, has been found to promote angiogenesis and wound healing. However, a systematic study on the impact of Li+, Sr2+, B3+, and the other ions in the BaGs, has not been conducted on a wide range of cells. Although the interactions between the BaGs and cells have been studied, it is difficult to compare the results between studies and conclude the impact of BaGs between cell types due to the variability of culture conditions, cells, and materials. We aim to evaluate the dissolution behavior of Li-, Sr-, and B-substituted BaGs and the effects of their ionic dissolution products on the viability, proliferation, and morphology of multiple cell types: human adipose stromal cells (hASCs), human lung fibroblasts (cell line WI-38), human urothelial cells (hUCs), and human umbilical vein endothelial cells (HUVECs). In the dissolution study, the B-substituted glasses induced a higher increase in pH and released more ions than the silicate glasses. The undiluted BaG extracts supported the viability and proliferation of all the other cell types except the hUCs. Diluting the BaG extracts to 1:10 restored the viability of hUCs but induced distinctive morphological changes. Diluting the extracts more (1:100) almost fully restored the hUC morphology. To conclude, the ionic dissolution products of Li-, Sr-, and B-substituted BaGs seem beneficial for hASCs, WI-38, hUCs, and HUVECs, but attention must be paid to the ion concentrations.

Tailoring of bioactive glass and glass-ceramics properties for in vitro and in vivo response optimization: a review

Bioactive glasses are inorganic biocompatible materials that can find applications in many biomedical fields. The main application is bone and dental tissue engineering. However, some applications in contact with soft tissues are emerging. It is well known that both bulk (such as composition) and surface properties (such as morphology and wettability) of an implanted material influence the response of cells in contact with the implant. This review aims to elucidate and compare the main strategies that are employed to modulate cell behavior in contact with bioactive glasses. The first part of this review is focused on the doping of bioactive glasses with ions and drugs, which can be incorporated into the bioceramic to impart several therapeutic properties, such as osteogenic, proangiogenic, or/and antibacterial ones. The second part of this review is devoted to the chemical functionalization of bioactive glasses using drugs, extra-cellular matrix proteins, vitamins, and polyphenols. In the third and final part, the physical modifications of the surfaces of bioactive glasses are reviewed. Both top-down (removing materials from the surface, for example using laser treatment and etching strategies) and bottom-up (depositing materials on the surface, for example through the deposition of coatings) strategies are discussed.

Role of magnesium and aluminum substitution on the structural properties and bioactivity of bioglasses synthesized from biogenic silica

The objective of this study was to investigate the effect of magnesium (1 wt%) and aluminum (1 wt%) incorporation on the in vitro bioactivity and biodegradation behavior of 45S5 bioactive glasses synthesized from rice husk biogenic silica. The performance of biogenic silica-based samples was compared well with commercial silica-based counterparts. The in vitro biodegradation behavior of bioactive glasses was evaluated by the weight loss of samples and pH variation in the Tris buffer solution. Based on composition, bioglasses possessed different properties before and after simulated body fluid (SBF) immersion. The incorporation of magnesium (Mg) and aluminum (Al) enhanced the Vickers hardness of bioglasses. All the bioglasses showed the hydroxyapatite layer formation after SBF treatment as confirmed by the dissolution, FTIR, SEM and XRD analysis, however it was more prominent in the rice husk silica-based 45S5 bioglass. The biogenic silica seems to be a promising starting material for bioglass systems to be used in bone tissue engineering applications.

Multiple and Promising Applications of Strontium (Sr)-Containing Bioactive Glasses in Bone Tissue Engineering

Improving and accelerating bone repair still are partially unmet needs in bone regenerative therapies. In this regard, strontium (Sr)-containing bioactive glasses (BGs) are highly-promising materials to tackle this challenge. The positive impacts of Sr on the osteogenesis makes it routinely used in the form of strontium ranelate (SR) in the clinical setting, especially for patients suffering from osteoporosis. Therefore, a large number of silicate-, borate-, and phosphate-based BGs doped with Sr and produced in different shapes have been developed and characterized, in order to be used in the most advanced therapeutic strategies designed for the management of bone defects and injuries. Although the influence of Sr incorporation in the glass is debated regarding the obtained physicochemical and mechanical properties, the biological improvements have been found to be substantial both in vitro and in vivo. In the present study, we provide a comprehensive overview of Sr-containing glasses along with the current state of their clinical use. For this purpose, different types of Sr-doped BG systems are described, including composites, coatings and porous scaffolds, and their applications are discussed in the light of existing experimental data along with the significant challenges ahead.

Structural, physico-mechanical and in-vitro bioactivity studies on SiO2-CaO-P2O5-SrO-Al2O3 bioactive glasses

Strontium based bioactive glasses have shown a better biocompatibility than calcia based bioactive glasses. In this report, we have shown that the bioactivity is found to be even more when we incorporate Al₂O₃ upto 1.5 mol% in SiO₂-CaO-P₂O₅-SrO bioactive glass. We have studied the structural, physico-mechanical and bioactive properties in these glasses with varying alumina concentration from 0.5 to 2.5 mol%. The bioactivity of the glasses is evaluated by in vitro test in simulated body fluid (SBF). The formation of hydroxy carbonated apatite layer (HCA) on the surface of glasses after immersion in SBF is identified by the XRD, FTIR and SEM. The substitution of Al₂O₃ for SrO in these glasses demonstrates a significant enhancement in compressive strength and elastic modulus. However cytotoxicity and cell viability assessed using human osteosarcoma U2-OS cell lines show the growth of the cells without causing any significant loss of viability and cell death upto 1.5 mol% addition of Al₂O₃. Osteosarcoma cells grow on the surface of bioglasses which make them biocompatible and fit for use in clinical trials.

A comparative study on the in vitro formation of hydroxyapatite, cytotoxicity and antibacterial activity of 58S bioactive glass substituted by Li and Sr

Lithium and strontium up to 10 mol% have been substituted for calcium in 58S bioactive glasses in order to enhance specific biological properties such as proliferation, alkaline phosphatase (ALP) activity of cells as well as antibacterial activity. In-vitro formation of hydroxyapatite was studied using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), inductively coupled plasma atomic emission spectrometry (ICP-AES) and scanning electron microscopy (SEM). Substitution of either Li or Sr for Ca in the composition had a retarding effect on the bioactivity while Li decreased and Sr increased the rate of ion release in the simulated body fluid solution. The dissolution rate showed to be inversely proportional to oxygen density of the bioactive glasses. The proposed mechanisms for the lowered bioactivity are a lower supersaturation degree for nucleation of apatite in Li substituted bioactive glasses and blocking of the active growth sites of calcium phosphate by Sr²⁺ in Sr substituted bioactive glasses. The proliferation rate and alkaline phosphate activity of osteoblast cell line MC3T3-E1 treated with Li and Sr bioactive glasses were studied. 3-(4,5dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and alkaline phosphate assay showed that all synthesized bioactive glasses with exception of 58S with 10 mol% SrO, exhibited statistically significant increase in both cell proliferation and alkaline phosphatase activity. Finally, 58S bioactive glass with 5 mol% Li₂O substitution for CaO was considered as a potential biomaterial in bone repair/regeneration therapies with enhanced biocompatibility, and alkaline phosphate activity, with a negligible loss in the bioactivity compared to the 58S bioglass. At the same time this composition had the highest antibacterial activity against methicillin-resistant Staphylococcus aureus bacteria among all synthesized Li and Sr substituted bioactive glasses.

Novel bioglasses for bone tissue repair and regeneration: Effect of glass design on sintering ability, ion release and biocompatibility

Eight novel silicate, phosphate and borate glass compositions (coded as NCLx, where x = 1 to 8), containing different oxides (i.e. MgO, MnO2, Al2O3, CaF2, Fe2O3, ZnO, CuO, Cr2O3) were designed and evaluated alongside apatite-wollastonite (used as comparison material), as potential biomaterials for bone tissue repair and regeneration. Glass frits of all the formulations were processed to have particle sizes under 53 μm, with their morphology and dimensions subsequently investigated by scanning electron microscopy (SEM). In order to establish the nature of the raw glass powders, X-ray diffraction (XRD) analysis was also performed. The sintering ability of the novel materials was determined by using hot stage microscopy (HSM). Ionic release potential was assessed by inductively coupled plasma optical emission spectroscopy (ICP-OES). Finally, the cytotoxic effect of the novel glass powders was evaluated for different glass concentrations via a colorimetric assay, on which basis three formulations are considered promising biomaterials.

Binary Doping of Strontium and Copper Enhancing Osteogenesis and Angiogenesis of Bioactive Glass Nanofibers while Suppressing Osteoclast Activity

Electrospun bioactive glass fibers show great potential as scaffolds for bone tissue engineering due to their architectural biomimicry of the bone extracellular matrix and their composition capable of providing soluble bioactive cues for bone regeneration and remodeling. Trace elements can be doped to further promote osteogenesis and angiogenesis during bone regeneration. Cationic substitution of strontium for calcium in bioactive glass positively enhances osteoblast phenotype, while suppressing osteoclast activity. Further, the addition of copper spontaneously improves the vascularization during neobone formation. The objective of this study was to fabricate and characterize electrospun bioactive glass fibers doped with strontium and copper and evaluate their potential for bone repair/regeneration in vitro. Different ratios of strontium and copper were doped in electrospun bioactive glass fibers. The released strontium and copper from doped fibers could reach effective concentrations within 40 h and last for 4 weeks. These bioactive glass fibers demonstrate their bioactivity by promoting osteoblastic and endothelial cell activity and inhibiting the formation of osteoclasts or bone resorbing cells. Additionally, in vitro cell culture of different cell types in the presence of extraction solutions of the electrospun bioactive glass fibers showed that the dopants achieved their individual goals without causing significant cytotoxicity. Altogether, this novel class of bioactive glass fibers holds great promise for bone regeneration.

Enhanced bioactivity, biocompatibility and mechanical behavior of strontium substituted bioactive glasses

Strontium contained biomaterials have been reported as a potential bioactive material for bone regeneration, as it reduces bone resorption and stimulates bone formation. In the present investigation, the bioactive glasses were designed to partially substitute SrO for SiO2 in Na2O-CaO-SrO-P2O5-SiO2 system. This work demonstrates that the substitution of SrO for SiO2 has got significant benefit than substitution for CaO in the bioactive glass. Bioactivity was assessed by the immersion of the samples in simulated body fluid for different intervals. The formation of hydroxy carbonate apatite layer was identified by X-ray diffractometry, scanning electron microscopy (SEM) and energy dispersive spectroscopy. The elastic modulus of the bioactive glasses was measured and found to increase with increasing SrO for SiO2. The blood compatibility of the samples was evaluated. In vitro cell culture studies of the samples were performed using human osteosarcoma U2-OS cell lines and found a significant improvement in cell viability and proliferation. The investigation showed enhancement in bioactivity, mechanical and biological properties of the strontia substituted for silica in glasses. Thus, these bioactive glasses would be highly potential for bone regeneration.

SiO2-CaO-P2O5 (58S) sol gel glass applied onto surgical grade stainless steel by spray technique: morphological characterization by digital image processing

AISI 316L stainless steel is commonly used as a low-cost material for permanent implants. It can be protected for degradation and corrosion by applying a hybrid silica based coating. Also the bioactive response of the implant can only be achieved by functionalizing the coated implant surface. The aim of this work is to synthesize and characterize a sol-gel made glass particles from the system SiO2-CaO-P2O5 with potential as bone inductive material, with and without an aging treatment of the precursor solution. The glass was synthesized by sol-gel technique that, comparing with melt glasses, generates an open net structure that could lead to particle dissolution and apatite deposition for biological purposes. The synthesized glass is dispersed by spray onto AISI 316L protected by a hybrid silica based coating, generating deposits with different size and morphology. To characterize the particles composition, microRaman spectroscopy was applied. It showed that no significant changes were reached after aging or thermal treatment of the deposited particles. Image processing techniques based on Mathematical Morphology were used to analyze morphology and sizes of the deposits obtain with the different sols (aged and no aged). Aproximately 50% of the surface was covered with particles made with a glass aged, and a 25% of covered area was reached with no aged one. When no aged glass particles were deposited, the particle size distribution shows the presence of many big particles with a roundness factor between 0.8 and 1 in a high percentage, meaning that they are spherical due to the presence of solvent and with a more open glass structure in the no aged glass. The Digital Image Processing and Raman spectroscopy tools help to analyze, characterize and quantify the bioactive particles deposited onto coated surgical grade stainless steel in terms of morphology, distribution and composition.

Structural analysis of xSrO-(50 - x)CaO-50P2O5 glasses with x=0, 5, or 10 mol% for potential use in a local delivery system for osteomyelitis treatment

The introduction of ions into a local delivery matrix is one method of managing degradation and subsequent release of the incorporated therapeutic agents. Of interest in this study was whether we could modify the structural nature of calcium polyphosphate (CPP) glass and the subsequent therapeutic potential of this local delivery matrix with inclusion of strontium (Sr). We found that adding 10 mol% Sr significantly increased the density and chain length of the glass. There was no significant impact of Sr doping on the subsequent loading of vancomycin into the matrix, or the matrix porosity. The noted differences in structural stability, ion release, and vancomycin release between the un-doped CPP matrices and 10 mol% Sr-doped CPP matrices in vitro are likely a result of a decrease in glass disorder upon Sr addition to the glass and preferential retention of Sr over Ca during matrix degradation. This study has provided further evidence that Sr incorporation may serve to both manipulate antibiotic release from the amorphous CPP matrix and provide a potential source of therapeutic ions for enhanced bone regeneration.

Mechanical properties and in vitro cellular behavior of zinc-containing nano-bioactive glass doped biphasic calcium phosphate bone substitutes

In the present study, different amounts (0.5-5 wt%) of a sol gel-derived zinc-containing nano-bioactive glass (NBG-Zn) powder were added to biphasic calcium phosphate (BCP). The mixtures were sintered at 1,100-1,300 °C and physical characteristics, mechanical properties, phase composition and morphology of them were studied. The samples were also soaked in human blood plasma for 15 days to evaluate variations in their surface morphologies. Rat calvarium-derived osteoblastic cells were seeded on tops of various samples and cell adhesion, proliferation, and alkaline phosphatase activity were evaluated at different culturing periods. The maximum bending strength (62 MPa) was obtained for BCP containing 0.5 wt% NBG-Zn at temperature 1,200 °C. This value was approximately 80% higher than that of pure BCP. The bending strength failed when both sintering temperature and amount of added NBG-Zn increased. At 1,100 °C, NBG-Zn additive did not change the phase composition of BCP. At temperatures 1,200 and 1,300 °C, both alpha-tricalcium calcium phosphate (α-TCP) and beta-tricalcium phosphate (β-TCP and) phases were detected. However, adding higher amount of NBG-Zn to BCP resulted in elevation of β-TCP at 1,200 °C and progression of α-TCP at 1,300 °C. Based on the microscopic observations, adding 0.5 wt% NBG-Zn to BCP led to disappearance of grain boundaries, reduction of micropores and formation of a monolithic microstructure. No calcium phosphate precipitation was observed on sample surfaces after soaking in blood plasma, but some pores were produced by phase dissolution. The size and volume of these pores were directly proportional to NBG-Zn content. Based on the cell studies, both BCP and NBG-Zn-added BCP samples supported attachment and proliferation of osteoblasts, but higher alkaline phosphatase enzyme was synthesized within the cells cultured on NBG-Zn-added BCP. Overall, biphasic calcium phosphate materials with improved mechanical and biological properties can be produced by using small quantity of zinc-containing bioactive glass particles.

Bone formation controlled by biologically relevant inorganic ions: role and controlled delivery from phosphate-based glasses

The role of metal ions in the body and particularly in the formation, regulation and maintenance of bone is only just starting to be unravelled. The role of some ions, such as zinc, is more clearly understood due to its central importance in proteins. However, a whole spectrum of other ions is known to affect bone formation but the exact mechanism is unclear as the effects can be complex, multifactorial and also subtle. Furthermore, a significant number of studies utilise single doses in cell culture medium, whereas the continual, sustained release of an ion may initiate and mediate a completely different response. We have reviewed the role of the most significant ions that are known to play a role in bone formation, namely calcium, zinc, strontium, magnesium, boron, titanium and also phosphate anions as well as copper and its role in angiogenesis, an important process interlinked with osteogenesis. This review will also examine how delivery systems may offer an alternative way of providing sustained release of these ions which may effect and potentiate a more appropriate and rapid tissue response.

Regression model for predicting selected thermal properties of next-generation bioactive glasses

The compositional palette traditionally used to develop bioactive glasses has grown in recent times to include therapeutic inorganic species such as zinc and strontium. Historical regression models used for predicting the properties of bioactive glasses as a function of composition have not evolved to consider this expanded compositional space. In this work, nonlinear regression analysis was applied to historical data to construct predictive models for the glass transition temperature and the coefficient of thermal expansion of next-generation bioactive glasses. The new regression models also provide some degree of improvement over existing models in predicting the properties of traditional bioactive glasses.

Development of strong and bioactive calcium phosphate cement as a light-cure organic-inorganic hybrid

In this research, light cured calcium phosphate cements (LCCPCs) were developed by mixing a powder phase (P) consisting of tetracalcium phosphate and dicalcium phosphate and a photo-curable resin phase (L), mixture of hydroxyethylmethacrylate (HEMA)/poly acrylic-maleic acid at various P/L ratios of 2.0, 2.4 and 2.8 g/mL. Mechanical strength, phase composition, chemical groups and microstructure of the cured cements were evaluated at pre-set times, i.e. before and after soaking in simulated body fluid (SBF). The proliferation of Rat-derived osteoblastic cells onto the LCCPCs as well as cytotoxicity of cement extracts were determined by cell counting and 3-{4,5-dimethylthiazol-2yl}-2,5-diphenyl-2H-tetrazolium bromide assay after different culture times. It was estimated from Fourier transforming infrared spectra of cured cements that the setting process is ruled by polymerization of HEMA monomers as well as formation of calcium poly-carboxylate salts. Microstructure of the cured cements consisted of calcium phosphate particles surrounded by polymerized resin phase. Formation of nano-sized needlelike calcium phosphate phase on surfaces of cements with P/L ratios of 2.4 and 2.8 g/mL was confirmed by scanning electron microscope images and X-ray diffractometry (XRD) of the cured specimen soaked in SBF for 21 days. Also, XRD patterns revealed that the formed calcium phosphate layer was apatite phase in a poor crystalline form. Biodegradation of the cements was confirmed by weight loss, change in molecular weight of polymer and morphology of the samples after different soaking periods. The maximum compressive strength of LCCPCs governed by resin polymerization and calcium polycarboxylate salts formation was about 80 MPa for cement with P/L ratio of 2.8 g/mL, after incubation for 24 h. The strength of all cements decreased by decreasing P/L ratio as well as increasing soaking time. The preliminary cell studies revealed that LCCPCs could support proliferation of osteoblasts cultured on their surfaces and no cytotoxic effect was observed for the extracts of them.

Spectroscopic investigation on formation and growth of mineralized nanohydroxyapatite for bone tissue engineering applications

Synthetic calcium hydroxyapatite (HAP,Ca(10)(PO(4))(6)(OH)(2)) is a well-known bioceramic material used in orthopaedic and dental applications because of its excellent biocompatibility and bone-bonding ability. Substitution of trace elements, such as Sr, Mg and Zn ions into the structure of calcium phosphates is the subject of widespread investigation. In this paper, we have reported the synthesis of Sr, Mg and Zn co-substituted nanohydroxyapatite by soft solution freezing method. The effect of pH on the morphology of bioceramic nanomaterial was also discussed. The in vitro bioactivity of the as-synthesized bioceramic nanomaterial was determined by soaking it in SBF for various days. The as-synthesized bioceramic nanomaterial was characterized by Fourier transform infrared spectroscopy, X- ray diffraction analysis, Scanning electron microscopy and Energy dispersive X-ray analysis and Transmission electron microscopic techniques respectively. The results obtained in our study have revealed that pH 10 was identified to induce the formation of mineralized nanohydroxyapatite. It is observed that the synthesis of bioceramic nanomaterial not only support the growth of apatite layer on its surface but also accelerate the growth which is evident from the in vitro studies. Therefore, mineralized nanohydroxyapatite is a potential candidate in bone tissue engineering.

Physicochemical properties and cellular responses of strontium-doped gypsum biomaterials

This paper describes some physical, structural, and biological properties of gypsum bioceramics doped with various amounts of strontium ions (0.19-2.23 wt%) and compares these properties with those of a pure gypsum as control. Strontium-doped gypsum (gypsum:Sr) was obtained by mixing calcium sulfate hemihydrate powder and solutions of strontium nitrate followed by washing the specimens with distilled water to remove residual salts. Gypsum was the only phase found in the composition of both pure and gypsum:Sr, meanwhile a shift into lower diffraction angles was observed in the X-ray diffraction patterns of doped specimens. Microstructure of all gypsum specimens consisted of many rod-like small crystals entangled to each other with more elongation and higher thickness in the case of gypsum:Sr. The Sr-doped sample exhibited higher compressive strength and lower solubility than pure gypsum. A continuous release of strontium ions was observed from the gypsum:Sr during soaking it in simulated body fluid for 14 days. Compared to pure gypsum, the osteoblasts cultured on strontium-doped samples showed better proliferation rate and higher alkaline phosphatase activity, depending on Sr concentration. These observations can predict better in vivo behavior of strontium-doped gypsum compared to pure one.

Metallic ions as therapeutic agents in tissue engineering scaffolds: an overview of their biological applications and strategies for new developments

This article provides an overview on the application of metallic ions in the fields of regenerative medicine and tissue engineering, focusing on their therapeutic applications and the need to design strategies for controlling the release of loaded ions from biomaterial scaffolds. A detailed summary of relevant metallic ions with potential use in tissue engineering approaches is presented. Remaining challenges in the field and directions for future research efforts with focus on the key variables needed to be taken into account when considering the controlled release of metallic ions in tissue engineering therapeutics are also highlighted.

Influence of strontium on structure, sintering and biodegradation behaviour of CaO-MgO-SrO-SiO(2)-P(2)O(5)-CaF(2) glasses

The present study investigates the influence of SrO on structure, apatite-forming ability, physico-chemical degradation and sintering behaviour of melt-quenched bioactive glasses with the composition (mol.%): (36.07 - x) CaO-xSrO-19.24MgO-5.61P(2)O(5)-38.49SiO(2)-0.59CaF(2), where x varies between 0 and 10. The detailed structural analysis of the glasses is made by infrared spectroscopy and magic angle spinning-nuclear magnetic resonance spectroscopy. Silicon is predominantly present as Q(2) (Si) species, while phosphorus is found as orthophosphate in all the investigated glasses. The apatite-forming ability of glasses is investigated by immersion of glass powders in simulated body fluid for time durations varying between 1 h and 7 days. While increasing the Sr(2+)/Ca(2+) ratio in the glasses does not affect their structure significantly, their apatite-forming ability is decreased considerably. Further, physico-chemical degradation of glasses is studied in accordance with ISO 10993-14 "Biological evaluation of medical devices - Part 14: Identification and quantification of degradation products from ceramics" in Tris-HCl and citric acid buffer, and the possible implications of the ion release profiles from the glasses in different solutions are discussed. The addition of strontium to the glasses leads to a sevenfold decrease in chemical degradation of glasses in Tris-HCl. The sintering of glass powders renders glass ceramics (GCs) with varying degrees of crystallinity and good flexural strength (98-131 MPa), where the mechanical properties depend on the nature and amount of crystalline phases present in the GCs.

The Effect of Microwave Irradiation on Structural and Mechanical Properties of Nano-Structured Bone-Like Carbonated Hydroxyapatite

Nanocrystalline carbonated hydroxyapatite was produced through hydraulic conversion of calcium phosphate cement in simulated body fluid (SBF) and then heated in a microwave oven at 1000-1250 °C. The phase composition and microstructures were evaluated, before and after the thermal processing, using XRD and SEM, respectively. Total porosity and bending strength of the samples were also tested. Proliferation and morphology of osteoblastic cells on samples were evaluated using MTT method. Limited growth of apatite crystals was observed by the thermal treatment in which the samples exhibited a crystal size of ~ 150 nm at heating temperature of 1250 º. Based on the results, the microwave irradiation led to a little change in phase composition of carbonated apatite and slight amount of β-TCP phase was found together with large amount of apatite. The sample irradiated at 1250 °C formed more dense material having bending strength value up to 130 % that of unheated sample. The in vitro cell studies showed that the microwave irradiated samples could provide adequate cell proliferation and attachment.

A review of the biological response to ionic dissolution products from bioactive glasses and glass-ceramics

Several inorganic materials such as special compositions of silicate glasses, glass-ceramics and calcium phosphates have been shown to be bioactive and resorbable and to exhibit appropriate mechanical properties which make them suitable for bone tissue engineering applications. However, the exact mechanism of interaction between the ionic dissolution products of such inorganic materials and human cells are not fully understood, which has prompted considerable research work in the biomaterials community during the last decade. This review comprehensively covers literature reports which have investigated specifically the effect of dissolution products of silicate bioactive glasses and glass-ceramics in relation to osteogenesis and angiogenesis. Particularly, recent advances made in fabricating dense biomaterials and scaffolds doped with trace elements (e.g. Zn, Sr, Mg, and Cu) and investigations on the effect of these elements on the scaffold biological performance are summarized and discussed in detail. Clearly, the biological response to artificial materials depends on many parameters such as chemical composition, topography, porosity and grain size. This review, however, focuses only on the ion release kinetics of the materials and the specific effect of the released ionic dissolution products on human cell behaviour, providing also a scope for future investigations and identifying specific research needs to advance the field. The biological performance of pure and doped silicate glasses, phosphate based glasses with novel specific compositions as well as several other silicate based compounds are discussed in detail. Cells investigated in the reviewed articles include human osteoblastic and osteoclastic cells as well as endothelial cells and stem cells.

The effect of ionic dissolution products of Ca-Sr-Na-Zn-Si bioactive glass on in vitro cytocompatibility

Many commercial bone grafts cannot regenerate healthy bone in place of diseased bone. Bioactive glasses have received much attention in this regard due to the ability of their ionic dissolution products to promote cell proliferation, cell differentiation and activate gene expression. Through the incorporation of certain ions, bioactive glasses can become therapeutic for specific pathological situations. Calcium-strontium-sodium-zinc-silicate glass bone grafts have been shown to release therapeutic levels of zinc and strontium, however the in vitro compatibility of these materials is yet to be reported. In this study, the in vitro cytocompatibility of three different calcium-strontium-sodium-zinc-silicate glasses was examined as a function of their ion release profiles, using Novabone® bioglass as a commercial comparison. Experimental compositions were shown to release Si(4+) ranging from 1 to 81 ppm over 30 days; comparable or enhanced release in comparison to Novabone. The maximum Ca(2+) release detected for experimental compositions was 9.1 ppm, below that reported to stimulate osteoblasts. Sr(2+) release was within known therapeutic ranges, and Zn(2+) release ranged from 0.5 to 1.4 ppm, below reported cytotoxic levels. All examined glass compositions show equivalent or enhanced in vitro compatibility in comparison to Novabone. Cells exposed to BT112 ionic products showed enhanced cell viabilities indicating cell proliferation was induced. The ion release profiles suggest this effect was due to a synergistic interaction between certain combinations and concentrations of ions. Overall, results indicate that the calcium-strontium-sodium-zinc-silicate glass compositions show equivalent or even enhanced in vitro compatibility compared to Novabone®.