Nucleobase-specific enhancement of Cy3 fluorescence

Fluorogenic cell surface glycan labelling with fluorescence molecular rotor dyes and nucleic acid stains

We show that covalent labelling of sialic acids on live cell surfaces or mucin increases the fluorescence of the fluorescence molecular rotors (FMRs) CCVJ, Cy3 and thioazole orange, enabling wash-free imaging of cell surfaces. Dual labelling with an FMR and an environmentally insensitive dye allows detection of changes that occur, for example, when cross-linking is altered.

A new twist on PIFE: photoisomerisation-related fluorescence enhancement

PIFE was first used as an acronym for protein-induced fluorescence enhancement, which refers to the increase in fluorescence observed upon the interaction of a fluorophore, such as a cyanine, with a protein. This fluorescence enhancement is due to changes in the rate ofcis/transphotoisomerisation. It is clear now that this mechanism is generally applicable to interactions with any biomolecule. In this review, we propose that PIFE is thereby renamed according to its fundamental working principle as photoisomerisation-related fluorescence enhancement, keeping the PIFE acronym intact. We discuss the photochemistry of cyanine fluorophores, the mechanism of PIFE, its advantages and limitations, and recent approaches to turning PIFE into a quantitative assay. We provide an overview of its current applications to different biomolecules and discuss potential future uses, including the study of protein-protein interactions, protein-ligand interactions and conformational changes in biomolecules.

Sequence-dependence of Cy3 and Cy5 dyes in 3' terminally-labeled single-stranded DNA

Fluorescence is an ideal tool to see and manipulate nucleic acids, and engage in their rich and complex biophysical properties. Labeling is the preferred approach to track and quantify fluorescence with nucleic acids and cyanine dyes are emblematic in this context. The fluorescent properties of cyanine dyes are known to be sequence-dependent, with purines in the immediate vicinity increasing the fluorescence intensity of Cy3 and Cy5 dyes, and the ability of nucleobases to modulate the photophysical properties of common fluorophores may influence fluorescence measurements in critical assays such as FISH, qPCR or high-throughput sequencing. In this paper, we comprehensively map the sequence-dependence of Cy3 and Cy5 dyes in 3'-fluorescently labeled single-stranded DNA by preparing the complete permutation library of the 5 consecutive nucleotides immediately adjacent to the dye, or 1024 sequences. G-rich motifs dominate the high fluorescence range, while C-rich motifs lead to significant quenching, an observation consistent with 5'-labeled systems. We also uncover GCGC patterns in the extreme top range of fluorescence, a feature specific to 3'-Cy3 and Cy5 oligonucleotides. This study represents the final piece in linking nucleotide identity to fluorescence changes for Cy3, Cy5 and fluorescein in all 3', 5', single-stranded and double-stranded DNA formats.

Characterization of Noise in a Single-Molecule Fluorescence Signal

Single-molecule fluorescence experiments allow monitoring of the structural change and dynamics of a single biomolecule in real time using dye molecules attached to the molecule. Often, the molecules are immobilized on the surface to observe a longer molecular dynamics, yet the finite photon budget available from an individual dye molecule before photobleaching sets the limit to the relatively poor signal-to-noise level. To increase the accuracy of these single-molecule experiments, it is necessary to study the cause of noise in the fluorescence signal from the single molecules. To find the origin of this noise, the lifetime of the fluorescent dye molecules labeled on surface-immobilized DNA was measured by using time-correlation single photon counting. The standard deviation of the fluorescence lifetimes obtained from repeated measurements of a single dye molecule with the total photon number N decreased as 1/N, thus following a shot noise of the Poisson statistics. On the other hand, an additional constant noise source, which is independent of the photon number, was observed from the lifetime uncertainties from many molecules and became more dominant after a certain photon number N. This trend was also followed in the uncertainties of the single-molecule FRET signals obtained from single and many molecules. This additional noise is considered to come from the inhomogeneous environment of each DNA immobilized on the surface.

Targetable Conformationally Restricted Cyanines Enable Photon-Count-Limited Applications*

Cyanine dyes are exceptionally useful probes for a range of fluorescence-based applications, but their photon output can be limited by trans-to-cis photoisomerization. We recently demonstrated that appending a ring system to the pentamethine cyanine ring system improves the quantum yield and extends the fluorescence lifetime. Here, we report an optimized synthesis of persulfonated variants that enable efficient labeling of nucleic acids and proteins. We demonstrate that a bifunctional sulfonated tertiary amide significantly improves the optical properties of the resulting bioconjugates. These new conformationally restricted cyanines are compared to the parent cyanine derivatives in a range of contexts. These include their use in the plasmonic hotspot of a DNA-nanoantenna, in single-molecule Förster-resonance energy transfer (FRET) applications, far-red fluorescence-lifetime imaging microscopy (FLIM), and single-molecule localization microscopy (SMLM). These efforts define contexts in which eliminating cyanine isomerization provides meaningful benefits to imaging performance.

Dependence of Fluorescence Quenching of CY3 Oligonucleotide Conjugates on the Oxidation Potential of the Stacking Base Pair

To understand the complex fluorescence properties of astraphloxin (CY3)-labelled oligonucleotides, it is necessary to take into account the redox properties of the nucleobases. In oligonucleotide hybrids, we observed a dependence of the fluorescence intensity on the oxidation potential of the neighbouring base pair. For the series I < A < G < 8-oxoG, the extent of fluorescence quenching follows the trend of decreasing oxidation potentials. In a series of 7 nt hybrids, stacking interactions of CY3 with perfect match and mismatch base pairs were found to stabilise the hybrid by 7–8 kJ/mol. The fluorescence measurements can be explained by complex formation resulting in fluorescence quenching that prevails over the steric effect of a reduced excited state trans-cis isomerisation, which was expected to increase the fluorescence efficiency of the dye when stacking to a base pair. This can be explained by the fact that, in a double strand, base pairing and stacking cause a dramatic change in the oxidation potential of the nucleobases. In single-molecule fluorescence measurements, the oxidation of G to 8-oxoG was observed as a result of photoinduced electron transfer and subsequent chemical reactions. Our results demonstrate that covalently linked CY3 is a potent oxidant towards dsDNA. Sulfonated derivatives should be used instead.

Nile Red lifetime reveals microplastic identity

Microplastic pollution is recognized as a worldwide environmental problem. The increasing daily use and release of plastics into the environment have led to the accumulation of fragmented microplastics, with potentially awful consequences for the environment, and animal and human health. The detection and identification of microplastics are of utmost importance, but available methods are still limited. In this work, a new approach is presented for the analysis of microplastics based on hydrophobic fluorescence staining with Nile Red, using spectrally resolved confocal fluorescence microscopy and fluorescence lifetime imaging microscopy (FLIM). Significant differences were observed in the emission spectra and fluorescence lifetimes of the analyzed microplastics. Nile Red fluorescence shows determinable behavior based on the polymer matrix and provides a fingerprint for the identification of fragments from different types of plastics. Lifetime imaging coupled with phasor analysis constitutes a fast, robust, and straightforward method for mapping and identifying different microplastics within the same sample in an aquatic environment.

Single-molecule chemistry. Part I: monitoring oxidation of G in oligonucleotides using CY3 fluorescence

Single-molecule hybridisation of CY3 dye labelled short oligonucleotides to surface immobilised probes was investigated in zero-mode waveguide nanostructures using a modified DNA sequencer. At longer measuring times, we observed changes of the initial hybridisation fluorescence pulse pattern which we attribute to products created by chemical reactions at the nucleobases. The origin is a charge separated state created by a photoinduced electron transfer from nucleobases to the dye followed by secondary reactions with oxygen and water, respectively. The positive charge can migrate through the hybrid resulting in base modifications at distant sites. Static fluorescence spectra were recorded in order to determine the properties of CY3 stacking to different base pairs, and compared to pulse intensities. A characteristic pulse pattern change was assigned to the oxidation of G to 8-oG besides the formation of a number of secondary products that are not yet identified. Further, we present a method to visualise the degree of chemical reactions to gain an overview of ongoing processes. Our study demonstrates that CY3 is able to oxidise nucleobases in ds DNA, and also in ss overhangs. An important finding is the correlation between nucleobase oxidation potential and fluorescence quenching which explains the intensity changes observed in single molecule measurements. The analysis of fluorescence traces provides the opportunity to track complete and coherent reaction sequences enabling to follow the fate of a single molecule over a long period of time, and to observe chemical reactions in real-time. This opens up the opportunity to analyse reaction pathways, to detect new products and short-lived intermediates, and to investigate rare events due to the large number of single molecules observed in parallel.

Identification of Nonradiative Decay Pathways in Cy3

Photoexcited fluorescent markers are extensively used in spectroscopy, imaging, and analysis of biological systems. The performance of fluorescent markers depends on high levels of emission, which are limited by competing nonradiative decay pathways. Small-molecule fluorescent dyes have been increasingly used as markers due to their high and stable emission. Despite their prevalence, the nonradiative decay pathways of these dyes have not been determined. Here, we investigate these pathways for a widely used indocarbocyanine dye, Cy3, using transient grating spectroscopy. We identify a nonradiative decay pathway via a previously unknown dark state formed within ∼1 ps of photoexcitation. Our experiments, in combination with electronic structure calculations, suggest that the generation of the dark state is mediated by picosecond vibrational mode coupling, likely via a conical intersection. We further identify the vibrational modes, and thus structural elements, responsible for the formation and dynamics of the dark state, providing insight into suppressing nonradiative decay pathways in fluorescent markers such as Cy3.

Photophysical properties of the hemicyanine Dy-630 and its potential as a single-molecule fluorescent probe for biophysical applications

Protein-induced fluorescence enhancement (PIFE) is an increasingly used approach to investigate DNA-protein interactions at the single molecule level. The optimal probe for this type of application is highly photostable, has a high absorption extinction coefficient, and has a moderate fluorescence quantum yield that increases significantly when the dye is in close proximity to a large macromolecule such as a protein. So far, the green-absorbing symmetric cyanine known as Cy3 has been the probe of choice in this field because the magnitude of the increase observed upon protein binding (usually 2-4 -fold) is large enough to allow for the analysis of protein dynamics on the inherently noisy single-molecule signals. Here, we report the characterization of the photophysical properties of the red-absorbing hemicyanine dye Dy-630 in the context of its potential application as a single-molecule PIFE probe. The behavior of Dy-630 in solution is similar to that of Cy3; the fluorescence quantum yield and lifetime of Dy-630 increase with increasing viscosity, and decrease with increasing temperature indicating the existence of an activated nonradiative process that depopulates the singlet state of the dye. As in the case of Cy3, the results of transient spectroscopy experiments are consistent with the formation of a photoisomer that reverts to the ground state thermally in the microsecond timescale. Unfortunately, experiments with DNA samples paint a more complex scenario. As in the case of Cy3, the fluorescence quantum yield of Dy-630 increases significantly when the dye interacts with the DNA bases, but in the case of Dy-630 attachment to DNA results in an already long fluorescence lifetime that does not provide a significant window for the protein-induced enhancement observed with Cy3. Although we show that Dy-630 may not be well-suited for PIFE, our results shed light on the optimal design principles for probes for PIFE applications.

The Protein Microenvironment Governs the Suitability of Labeling Sites for Single-Molecule Spectroscopy of RNP Complexes

Single-molecule techniques allow unique insights into biological systems as they provide unrivaled access to structural dynamics and conformational heterogeneity. One major bottleneck for reliable single-molecule Förster resonance energy transfer (smFRET) analysis is the identification of suitable fluorophore labeling sites that neither impair the function of the biological system nor cause photophysical artifacts of the fluorophore. To address this issue, we identified the contribution of virtually all individual parameters that affect Förster resonance energy transfer between two fluorophores attached to a ribonucleoprotein complex consisting of the RNA-binding protein L7Ae and a cognate kink turn containing RNA. A non-natural amino acid was incorporated at various positions of the protein using an amber suppression system (pEVOL) to label the protein via copper(I)-catalyzed alkyne-azide cycloaddition. On the basis of simulations followed by functional, structural, and multiparameter fluorescence analysis of five different smFRET RNPs, new insights into the design of smFRET RNPs were obtained. From this, a correlation between the photophysical properties of fluorophores attached to the protein and the predictability of the corresponding smFRET construct was established. Additionally, we identify a straightforward experimental method for characterizing selected labeling sites. Overall, this protocol allows fast generation and assessment of functional RNPs for accurate single-molecule experiments.

An atomistic view on carbocyanine photophysics in the realm of RNA

Carbocyanine dyes have a long-standing tradition in fluorescence imaging and spectroscopy, due to their photostability and large spectral separation between individual dye species. Herein, we explore the versatility of cyanine dyes to probe the dynamics of nucleic acids and we report on the interrelation of fluorophores, RNA, and metal ions, namely K⁺ and Mg²⁺. Photophysical parameters including the fluorescence lifetime, quantum yield and dynamic anisotropy are monitored as a function of the nucleic acid composition, conformation, and metal ion abundance. Occasional excursions to a non-fluorescent cis-state hint at the remarkable sensitivity of carbocyanines to their local environment. Comparison of time-correlated single photon experiments with all-atom molecular dynamics simulations demonstrate that the propensity of photoisomerization is dictated by sterical constraints imposed on the fluorophore. Structural features in the vicinity of the dye play a crucial role in RNA recognition and have far-reaching implications on the mobility of the fluorescent probe. An atomic level description of the mutual interactions will ultimately benefit the quantitative interpretation of single-molecule FRET measurements on large RNA systems.

A Rhodium-Cyanine Fluorescent Probe: Detection and Signaling of Mismatches in DNA

We report a bifunctional fluorescent probe that combines a rhodium metalloinsertor with a cyanine dye as the fluorescent reporter. The conjugate shows weak luminescence when free in solution or with well matched DNA but exhibits a significant luminescence increase in the presence of a 27-mer DNA duplex containing a central CC mismatch. DNA photocleavage experiments demonstrate that, upon photoactivation, the conjugate cleaves the DNA backbone specifically near the mismatch site on a 27-mer fragment, consistent with mismatch targeting. Fluorescence titrations with the 27-mer duplex containing the CC mismatch reveal a DNA binding affinity of 3.1 × 106 M-1, similar to that of other rhodium metalloinsertors. Fluorescence titrations using genomic DNA extracted from various cell lines demonstrate a clear discrimination in fluorescence between those cell lines that are proficient or deficient in mismatch repair. This differential luminescence reflects the sensitive detection of the mismatchrepair-deficient phenotype.

Directional Photonic Wire Mediated by Homo-Förster Resonance Energy Transfer on a DNA Origami Platform

Elaborating efficient strategies and deepening the understanding of light transport at the nanoscale is of great importance for future designs of artificial light-harvesting assemblies and dye-based photonic circuits. In this work, we focus on studying the phenomenon of Förster resonance energy transfer (FRET) among fluorophores of the same kind (homo-FRET) and its implications for energy cascades containing two or three different dye molecules. Utilizing the spatial programmability of DNA origami, we arranged a chain of cyanine 3 (Cy3) dyes flanked at one end with a dye of lower excitation energy, cyanine 5 (Cy5), with or without an additional dye of higher excitation energy, Alexa488, at the other end. We characterized the response of our fluorophore assemblies with bulk and single-molecule spectroscopy and support our measurements by Monte Carlo modeling of energy transfer within the system. We find that, depending on the arrangement of the fluorophores, homo-FRET between the Cy3 dyes can lead to an overall enhanced energy transfer to the acceptor fluorophore. Furthermore, we systematically analyzed the homo-FRET system by addressing the fluorescence lifetime and anisotropy. Finally, we built a homo-FRET-mediated photonic wire capable of transferring energy through the homo-FRET system from the blue donor dye (Alexa488) to the red acceptor fluorophore (Cy5) across a total distance of 16 nm.

Single-step, homogeneous and sensitive detection for microRNAs with dual-recognition steps based on luminescence resonance energy transfer (LRET) using upconversion nanoparticles

A single-step, homogeneous and sensitive LRET assay is presented for the detection of miRNAs. The amplification-free assay provides a unique combination of high specificity with dual-recognition approach of different hybridization and ligation steps and preventing background auto-fluorescence in biological samples using upconversion nanoparticles (UCNPs) as signal-producing nanoprobes. The assay probe is composed of signal-producing unit (a pair of homogeneous upconversion luminescence resonance energy transfer (UC-LRET)-based oligonucleotides) and recognition unit (two adaptor oligonucleotides). In the presence of target miRNAs, the probe and target miRNAs leads to the formation of stable double-strands and semi-stable adaptor-miRNAs complexes with an adaptor nick. Ligation of the nick using ligase cause the formation of stable double-strands, resulting in UCNPs-to-dye UC-LRET for detection of the miRNAs with near-infrared radiation (980nm). Sensitive detection of miRNA-21 at concentrations of 200pM to 1.4nM and detection limits of 0.095nM with good precision of 3.9% (RSD) for seven repeated measurements of 500pM miRNAs demonstrate the feasibility of both high throughput and point-of-care clinical diagnostics. The homogeneous UC-LRET assay without any washing can be extended to the application in other important types of nucleic acid analysis.

Sequence-Dependent Fluorescence of Cy3- and Cy5-Labeled Double-Stranded DNA

The fluorescent intensity of Cy3 and Cy5 dyes is strongly dependent on the nucleobase sequence of the labeled oligonucleotides. Sequence-dependent fluorescence may significantly influence the data obtained from many common experimental methods based on fluorescence detection of nucleic acids, such as sequencing, PCR, FRET, and FISH. To quantify sequence dependent fluorescence, we have measured the fluorescence intensity of Cy3 and Cy5 bound to the 5' end of all 1024 possible double-stranded DNA 5mers. The fluorescence intensity was also determined for these dyes bound to the 5' end of fixed-sequence double-stranded DNA with a variable sequence 3' overhang adjacent to the dye. The labeled DNA oligonucleotides were made using light-directed, in situ microarray synthesis. The results indicate that the fluorescence intensity of both dyes is sensitive to all five bases or base pairs, that the sequence dependence is stronger for double- (vs single-) stranded DNA, and that the dyes are sensitive to both the adjacent dsDNA sequence and the 3'-ssDNA overhang. Purine-rich sequences result in higher fluorescence. The results can be used to estimate measurement error in experiments with fluorescent-labeled DNA, as well as to optimize the fluorescent signal by considering the nucleobase environment of the labeling cyanine dye.

Site-Specific Difunctionalization of Structured RNAs Yields Probes for microRNA Maturation

Modified oligonucleotides bearing multiple functional labels are valuable tools in RNA biology. Efficient synthetic access to singly modified short DNAs and RNAs has been developed in the past years and paved the way to a first generation of oligonucleotide tools. Here, we describe an efficient procedure for the site-specific hetero bis-labeling of long RNAs. We exemplified the method with the preparation of Cy3/Cy5 pre-microRNAs labeled at selected internal sites as probes for microRNA maturation.

Single-Molecule Fluorescence Imaging of Interfacial DNA Hybridization Kinetics at Selective Capture Surfaces

Accurate knowledge of the kinetics of complementary oligonucleotide hybridization is integral to the design and understanding of DNA-based biosensors. In this work, single-molecule fluorescence imaging is applied to measuring rates of hybridization between fluorescently labeled target ssDNA and unlabeled probe ssDNA immobilized on glass surfaces. In the absence of probe site labeling, the capture surface must be highly selective to avoid the influence of nonspecific adsorption on the interpretation of single-molecule imaging results. This is accomplished by increasing the probe molecule site densities by a factor of ∼100 compared to optically resolvable sites so that nonspecific interactions compete with a much greater number of capture sites and by immobilizing sulfonate groups to passivate the surface between probe strands. The resulting substrates exhibit very low nonspecific adsorption, and the selectivity for binding a complementary target sequence exceeds that of a scrambled sequence by nearly 3 orders of magnitude. The population of immobilized DNA probe sites is quantified by counting individual DNA duplexes at low target concentrations, and those results are used to calibrate fluorescence intensities on the same sample at much higher target concentrations to measure a full binding isotherm. Dissociation rates are determined from interfacial residence times of individual DNA duplexes. Equilibrium and rate constants of hybridization, K(a) = 38 (±1) μM(-1), k(on) = 1.64 (±0.06) × 10(6) M(-1) s(-1), and k(off) = 4.3 (±0.1) × 10(-2) s(-1), were found not to change with surface density of immobilized probe DNA, indicating that hybridization events at neighboring probe sites are independent. To test the influence of probe-strand immobilization on hybridization, the kinetics of the probe target reaction at the surface were compared with the same reaction in free solution, and the equilibrium constants and dissociation and association rates were found to be nearly equivalent. The selectivity of these capture surfaces should facilitate sensitive investigations of DNA hybridization at the limit of counting molecules. Because the immobilized probe DNA on these surfaces is unlabeled, photobleaching of a probe label is not an issue, allowing capture substrates to be used for long periods of time or even reused in multiple experiments.

A 1536-well fluorescence polarization assay to screen for modulators of the MUSASHI family of RNA-binding proteins

RNA-binding proteins (RBPs) can act as stem cell modulators and oncogenic drivers, but have been largely ignored by the pharmaceutical industry as potential therapeutic targets for cancer. The MUSASHI (MSI) family has recently been demonstrated to be an attractive clinical target in the most aggressive cancers. Therefore, the discovery and development of small molecule inhibitors could provide a novel therapeutic strategy. In order to find novel compounds with MSI RNA binding inhibitory activity, we have developed a fluorescence polarization (FP) assay and optimized it for high throughput screening (HTS) in a 1536-well microtiter plate format. Using a chemical library of 6,208 compounds, we performed pilot screens, against both MSI1 and MSI2, leading to the identification of 7 molecules for MSI1, 15 for MSI2 and 5 that inhibited both. A secondary FP dose-response screen validated 3 MSI inhibitors with IC50 below 10 μM. Out of the 25 compounds retested in the secondary screen only 8 demonstrated optical interference due to high fluorescence. Utilizing a SYBR-based RNA electrophoresis mobility shift assay (EMSA), we further verified MSI inhibition of the top 3 compounds. Surprisingly, even though several aminoglycosides were present in the library, they failed to demonstrate MSI inhibitor activity challenging the concept that these compounds are pan-active against RBPs. In summary, we have developed an in vitro strategy to identify MSI specific inhibitors using an FP HTS platform, which will facilitate novel drug discovery for this class of RBPs.

Cy3 and Cy5 dyes attached to oligonucleotide terminus stabilize DNA duplexes: predictive thermodynamic model

Cyanine dyes are important chemical modifications of oligonucleotides exhibiting intensive and stable fluorescence at visible light wavelengths. When Cy3 or Cy5 dye is attached to 5' end of a DNA duplex, the dye stacks on the terminal base pair and stabilizes the duplex. Using optical melting experiments, we have determined thermodynamic parameters that can predict the effects of the dyes on duplex stability quantitatively (ΔG°, Tm). Both Cy dyes enhance duplex formation by 1.2 kcal/mol on average, however, this Gibbs energy contribution is sequence-dependent. If the Cy5 is attached to a pyrimidine nucleotide of pyrimidine-purine base pair, the stabilization is larger compared to the attachment to a purine nucleotide. This is likely due to increased stacking interactions of the dye to the purine of the complementary strand. Dangling (unpaired) nucleotides at duplex terminus are also known to enhance duplex stability. Stabilization originated from the Cy dyes is significantly larger than the stabilization due to the presence of dangling nucleotides. If both the dangling base and Cy3 are present, their thermodynamic contributions are approximately additive. New thermodynamic parameters improve predictions of duplex folding, which will help design oligonucleotide sequences for biophysical, biological, engineering, and nanotechnology applications.

Chemical modifications of artificial restriction DNA cutter (ARCUT) to promote its in vivo and in vitro applications

Recently, completely chemistry-based tools for site-selective scission of DNA (ARCUT) have been prepared by combining 2 strands of pseudo-complementary PNA (pcPNA: site-selective activator) and a Ce(IV)-EDTA complex (molecular scissors). Its site-specificity is sufficient to cut the whole human genome at one predetermined site. In this first-generation ARCUT, however, there still remain several problems to be solved for wider applications. This review presents recent approaches to solve these problems. They are divided into (i) covalent modification of pcPNA with other functional groups and (ii) new strategies using conventional PNA, in place of pcPNA, as site-selective activator. Among various chemical modifications, conjugation with positively-charged nuclear localization signal peptide is especially effective. Furthermore, unimolecular activators, a single strand of which successfully activates the target site in DNA for site-selective scission, have been also developed. As the result of these modifications, the site-selective scission by Ce(IV)-EDTA was achieved promptly even under high salt conditions which are otherwise unfavourable for double-duplex invasion. Furthermore, it has been shown that "molecular crowding effect," which characterizes the inside of living cells, enormously promotes the invasion, and thus the invasion seems to proceed effectively and spontaneously in the cells. Strong potential of pcPNA for further applications in vivo and in vitro has been confirmed.

Cy3 and Cy5 dyes terminally attached to 5'C end of DNA: structure, dynamics, and energetics

Cy3 and Cy5 cyanine dyes terminally attached to the 5'C end (C1) of the DNA oligonucleotide were studied by metadynamics (MTD), molecular dynamics (MD), and density-functional methods with dispersion corrections (DFT-D). MTD simulations explored the free energy surface (FES) of the dye-DNA interactions, which included stacking and major groove binding motifs and unstacked structures. Dynamics of the stacked structures was studied by the MD simulations. All possible combinations of stacking interactions between the two indole rings of the dyes and the neighbor guanine and cytosine rings were observed. The most probable interaction included the stacking between the dye's distal indole ring and the guanine base. In ∼10% of the structures the delocalized π-electrons of the dyes' polymethine linkers played a key role in the dye-DNA dispersion interactions. The stacked conformers of the Cy3 dye were confirmed as true minima by DFT-D full optimizations. The stacked dye decreased flexibility up to two neighbor base pairs.

PNA-NLS conjugates as single-molecular activators of target sites in double-stranded DNA for site-selective scission

Artificial DNA cutters have been developed by us in our previous studies by combining two strands of pseudo-complementary peptide nucleic acid (pcPNA) with Ce(IV)-EDTA-promoted hydrolysis. The pcPNAs have two modified nucleobases (2,6-diaminopurine and 2-thiouracil) instead of conventional A and T, and can invade double-stranded DNA to activate the target site for the scission. This system has been applied to site-selective scissions of plasmid, λ-phage, E. coli genomic DNA, and human genomic DNA. Here, we have reported a still simpler and more convenient DNA cutter obtained by conjugating peptide nucleic acid (PNA) with a nuclear localization signal (NLS) peptide. This new DNA cutter requires only one PNA strand (instead of two) bearing conventional (non-pseudo-complementary) nucleobases. This PNA-NLS conjugate effectively activated the target site in double-stranded DNA and induced site-selective scission by Ce(IV)-EDTA. The complex formation between the conjugate and DNA was concretely evidenced by spectroscopic results based on time-resolved fluorescence. The target scission site of this new system was straightforwardly determined by the Watson-Crick base pairing rule, and mismatched sequences were clearly discriminated. Importantly, even highly GC-rich regions, which are difficult to be targeted by a previous strategy using pcPNA, were successfully targeted. All these features of the present DNA cutter make it promising for various future applications.

Comparison of the sequence-dependent fluorescence of the cyanine dyes Cy3, Cy5, DyLight DY547 and DyLight DY647 on single-stranded DNA

Cyanine dyes are commonly used for fluorescent labeling of DNA and RNA oligonucleotides in applications including qPCR, sequencing, fluorescence in situ hybridization, Förster resonance energy transfer, and labeling for microarray hybridization. Previous research has shown that the fluorescence efficiency of Cy3 and Cy5, covalently attached to the 5′ end of single-stranded DNA, is strongly sequence dependent. Here, we show that DY547 and DY647, two alternative cyanine dyes that are becoming widely used for nucleic acid labeling, have a similar pattern of sequence-dependence, with adjacent purines resulting in higher intensity and adjacent cytosines resulting in lower intensity. Investigated over the range of all 1024 possible DNA 5mers, the intensities of Cy3 and Cy5 drop by ∼50% and ∼65% with respect to their maxima, respectively, whereas the intensities of DY547 and DY647 fall by ∼45% and ∼40%, respectively. The reduced magnitude of change of the fluorescence intensity of the DyLight dyes, particularly of DY647 in comparison with Cy5, suggests that these dyes are less likely to introduce sequence-dependent bias into experiments based on fluorescent labeling of nucleic acids.

Photophysical and dynamical properties of doubly linked Cy3-DNA constructs

Photophysical measurements are reported for Cy3-DNA constructs in which both Cy3 nitrogen atoms are attached to the DNA backbone by short linkers. While this linking was thought to rigidify the orientation of the dye and hinder cis-isomerization, the relatively low fluorescence quantum yield and the presence of a short component in the time-resolved fluorescence decay of the dye indicated that cis-isomerization remained possible. Fluorescence correlation spectroscopy and transient absorption experiments showed that photoisomerization occurred with high efficiency. Molecular dynamics simulations of the trans dye system indicated the presence of stacked and unstacked states, and free energy simulations showed that the barriers for stacking/unstacking were low. In addition, simulations showed that the ground cis state was feasible without DNA distortions. Based on these observations, a model is put forward in which the doubly linked dye can photoisomerize in the unstacked state.

Indocyanine dyes approach free rotation at the 3' terminus of A-RNA: a comparison with the 5' terminus and consequences for fluorescence resonance energy transfer

Cyanine dyes are widely used to study the folding and structural transformations of nucleic acids using fluorescence resonance energy transfer (FRET). The extent to which FRET can be used to extract inter- and intramolecular distances has been the subject of considerable debate in the literature; the contribution of dye and linker dynamics to the observed FRET signal is particularly troublesome. We used molecular dynamics (MD) simulations to study the dynamics of the indocarbocyanine dyes Cy3 and Cy5 attached variously to the 3' or 5' terminal bases of a 16-base-pair RNA duplex. We then used Monte Carlo modeling of dye photophysics to predict the results of single-molecule-sensitive FRET measurements of these same molecules. Our results show that the average value of FRET depends on both the terminal base and the linker position. In particular, 3' attached dyes typically explore a wide region of configuration space, and the relative orientation factor, κ(2), has a distribution that approaches that of free-rotators. This is in contrast to 5' attached dyes, which spend a significant fraction of their time in one or more configurations that are effectively stacked on the ends of the RNA duplex. The presence of distinct dye configurations for 5' attached dyes is consistent with observations, made by others, of multiple fluorescence lifetimes of Cy3 on nucleic acids. Although FRET is frequently used as a molecular "ruler" to measure intramolecular distances, the unambiguous measurement of distances typically relies on the assumption that the rotational degrees of freedom of the dyes can be averaged out and that the donor lifetime in the absence of the acceptor is a constant. We demonstrate that even for the relatively free 3' attached dyes, the correlation time of κ(2) is still too long to justify the use of a free-rotation approximation. We further explore the consequences of multiple donor lifetimes on the predicted value of FRET.

Advances in quantitative FRET-based methods for studying nucleic acids

Förster resonance energy transfer (FRET) is a powerful tool for monitoring molecular distances and interactions at the nanoscale level. The strong dependence of transfer efficiency on probe separation makes FRET perfectly suited for "on/off" experiments. To use FRET to obtain quantitative distances and three-dimensional structures, however, is more challenging. This review summarises recent studies and technological advances that have improved FRET as a quantitative molecular ruler in nucleic acid systems, both at the ensemble and at the single-molecule levels.

A highly fluorescent DNA toolkit: synthesis and properties of oligonucleotides containing new Cy3, Cy5 and Cy3B monomers

Cy3B is an extremely bright and stable fluorescent dye, which is only available for coupling to nucleic acids post-synthetically. This severely limits its use in the fields of genomics, biology and nanotechnology. We have optimized the synthesis of Cy3B, and for the first time produced a diverse range of Cy3B monomers for use in solid-phase oligonucleotide synthesis. This molecular toolkit includes phosphoramidite monomers with Cy3B linked to deoxyribose, to the 5-position of thymine, and to a hexynyl linker, in addition to an oligonucleotide synthesis resin in which Cy3B is linked to deoxyribose. These monomers have been used to incorporate single and multiple Cy3B units into oligonucleotides internally and at both termini. Cy3B Taqman probes, Scorpions and HyBeacons have been synthesized and used successfully in mutation detection, and a dual Cy3B Molecular Beacon was synthesized and found to be superior to the corresponding Cy3B/DABCYL Beacon. Attachment of Cy3, Cy3B and Cy5 to the 5-position of thymidine by an ethynyl linker enabled the synthesis of an oligonucleotide FRET system. The rigid linker between the dye and nucleobase minimizes dye–dye and dye–DNA interactions and reduces fluorescence quenching. These reagents open up new future applications of Cy3B, including more sensitive single-molecule and cell-imaging studies.

Probing the interaction between fluorophores and DNA nucleotides by fluorescence correlation spectroscopy and fluorescence quenching

We have investigated the association interactions between the fluorescent dyes TAMRA, Cy3B and Alexa-546 and the DNA deoxynucleoside monophosphates by means of fluorescence quenching and fluorescence correlation spectroscopy (FCS). The interactions of Cy3B and TAMRA with the nucleotides produce a decrease in the apparent diffusion coefficient of the dyes, which result in a shift toward longer times in the FCS autocorrelation decays. Our results with Cy3B demonstrate the existence of Cy3B-nucleotide interactions that do not affect the fluorescence intensity or lifetime of the dye significantly. The same is true for TAMRA in the presence of dAMP, dCMP and dTMP. In contrast, the diffusion coefficient of Alexa 546 remains practically unchanged even at high concentrations of nucleotide. These results demonstrate that interactions between this dye and the four dNMPs are not significant. The presence of the negatively charged sulfonates and the bulky chlorine atoms in the phenyl group of Alexa 546 possibly prevent strong interactions that are otherwise possible for TAMRA. The characterization of dye-DNA interactions is important in biophysical research because they play an important role in the interpretation of energy transfer experiments, and because they can potentially affect the structure and dynamics of the DNA.

Spectroscopic and photophysical properties of dUTP and internally DNA bound fluorophores for optimized signal detection in biological formats

Efficient signal generation in DNA-based assays requires understanding of the influence of fluorophore's interactions on the spectroscopic properties. The resulting changes in fluorescence intensity, quantum yield, emission anisotropy, and fluorescence lifetime provide straightforward tools for the study of molecular dynamics and interaction between labels and nucleic acids. Searching for bright fluorescent reporters for rolling circle amplification (RCA) as efficient signal enhancement strategy for biological formats, we investigated the spectroscopic properties of seven dyes: cyanines, rhodamines, and BODIPYs. They spectrally resemble Cy3, the most frequently used fluorophore in biodetection formats, and are measured in six samples (free dye, dye-dUTP, internally labeled ssDNA and dsDNA-single- and triple-labeled) using steady-state and time-resolved fluorometry. Special emphasis was dedicated to characterizing the nature of the interaction of these fluorophores differing in dye class, charge, and rigidity. Our results suggest dye charge and structure as main factors governing the dye's interactions, with DY-555 and Cy3B presenting the best candidates for our envisaged signal amplification strategy. This label comparison underlines the importance of a proper understanding of structure-property relations and dye-biomolecule interactions for reporter choice and presents a road map towards the design and interpretation of experiments using these labels on DNA of known sequence.

Photophysics of fluorescent probes for single-molecule biophysics and super-resolution imaging

Single-molecule fluorescence spectroscopy and super-resolution microscopy are important elements of the ongoing technical revolution to reveal biochemical and cellular processes in unprecedented clarity and precision. Demands placed on the photophysical properties of the fluorophores are stringent and drive the choice of appropriate probes. Such fluorophores are not simple light bulbs of a certain color and brightness but instead have their own "personalities" regarding spectroscopic parameters, redox properties, size, water solubility, photostability, and several other factors. Here, we review the photophysics of fluorescent probes, both organic fluorophores and fluorescent proteins, used in applications such as particle tracking, single-molecule FRET, stoichiometry determination, and super-resolution imaging. Of particular interest is the thiol-induced blinking of Cy5, a curse for single-molecule biophysical studies that was later overcome using Trolox through a reducing/oxidizing system but a boon for super-resolution imaging owing to the controllable photoswitching. Understanding photophysics is critical in the design and interpretation of single-molecule experiments.

Orientation of cyanine fluorophores terminally attached to DNA via long, flexible tethers

Cyanine fluorophores are commonly used in single-molecule FRET experiments with nucleic acids. We have previously shown that indocarbocyanine fluorophores attached to the 5'-termini of DNA and RNA via three-carbon atom linkers stack on the ends of the helix, orienting their transition moments. We now investigate the orientation of sulfoindocarbocyanine fluorophores tethered to the 5'-termini of DNA via 13-atom linkers. Fluorescence lifetime measurements of sulfoindocarbocyanine 3 attached to double-stranded DNA indicate that the fluorophore is extensively stacked onto the terminal basepair at 15 °C, with properties that depend on the terminal sequence. In single molecules of duplex DNA, FRET efficiency between sulfoindocarbocyanine 3 and 5 attached in this manner is modulated with helix length, indicative of fluorophore orientation and consistent with stacked fluorophores that can undergo lateral motion. We conclude that terminal stacking is an intrinsic property of the cyanine fluorophores irrespective of the length of the tether and the presence or absence of sulfonyl groups. However, compared to short-tether indocarbocyanine, the mean rotational relationship between the two fluorophores is changed by ∼60° for the long-tether sulfoindocarbocyanine fluorophores. This is consistent with the transition moments becoming approximately aligned with the long axis of the terminal basepair for the long-linker species.

Sequence-dependent fluorescence of cyanine dyes on microarrays

Cy3 and Cy5 are among the most commonly used oligonucleotide labeling molecules. Studies of nucleic acid structure and dynamics use these dyes, and they are ubiquitous in microarray experiments. They are sensitive to their environment and have higher quantum yield when bound to DNA. The fluorescent intensity of terminal cyanine dyes is also known to be significantly dependent on the base sequence of the oligonucleotide. We have developed a very precise and high-throughput method to evaluate the sequence dependence of oligonucleotide labeling dyes using microarrays and have applied the method to Cy3 and Cy5. We used light-directed in-situ synthesis of terminally-labeled microarrays to determine the fluorescence intensity of each dye on all 1024 possible 5′-labeled 5-mers. Their intensity is sensitive to all five bases. Their fluorescence is higher with 5′ guanines, and adenines in subsequent positions. Cytosine suppresses fluorescence. Intensity falls by half over the range of all 5-mers for Cy3, and two-thirds for Cy5. Labeling with 5′-biotin-streptavidin-Cy3/-Cy5 gives a completely different sequence dependence and greatly reduces fluorescence compared with direct terminal labeling.

Cy3-DNA stacking interactions strongly depend on the identity of the terminal basepair

We characterized the effect of the first basepair on the conformational dynamics of the fluorescent dye Cy3 attached to the 5' end of double-stranded DNA using gaussian-mixture adaptive umbrella sampling simulations. In the simulations, the sampling of all five dihedral angles along the linker was enhanced, so that both stacked and unstacked states were sampled. The affinity of Cy3 for a T·A basepair (with the dye attached to T) was found to be significantly less than for the other basepairs. This was verified experimentally by measuring the activation energies for cis-trans isomerization of the dye. The simulation and experimental results indicate the existence of partially unstacked conformations amenable to photoisomerization. The simulations also showed that stacking of Cy3 straightens the DNA while stabilizing the first basepair. Our findings indicate that fluorescence is modulated by Cy3-DNA interactions in a sequence-dependent manner.

Cyanine dyes in biophysical research: the photophysics of polymethine fluorescent dyes in biomolecular environments

The breakthroughs in single molecule spectroscopy of the last decade and the recent advances in super resolution microscopy have boosted the popularity of cyanine dyes in biophysical research. These applications have motivated the investigation of the reactions and relaxation processes that cyanines undergo in their electronically excited states. Studies show that the triplet state is a key intermediate in the photochemical reactions that limit the photostability of cyanine dyes. The removal of oxygen greatly reduces photobleaching, but induces rapid intensity fluctuations (blinking). The existence of non-fluorescent states lasting from milliseconds to seconds was early identified as a limitation in single-molecule spectroscopy and a potential source of artifacts. Recent studies demonstrate that a combination of oxidizing and reducing agents is the most efficient way of guaranteeing that the ground state is recovered rapidly and efficiently. Thiol-containing reducing agents have been identified as the source of long-lived dark states in some cyanines that can be photochemically switched back to the emissive state. The mechanism of this process is the reversible addition of the thiol-containing compound to a double bond in the polymethine chain resulting in a non-fluorescent molecule. This process can be reverted by irradiation at shorter wavelengths. Another mechanism that leads to non-fluorescent states in cyanine dyes is cis–trans isomerization from the singlet-excited state. This process, which competes with fluorescence, involves the rotation of one-half of the molecule with respect to the other with an efficiency that depends strongly on steric effects. The efficiency of fluorescence of most cyanine dyes has been shown to depend dramatically on their molecular environment within the biomolecule. For example, the fluorescence quantum yield of Cy3 linked covalently to DNA depends on the type of linkage used for attachment, DNA sequence and secondary structure. Cyanines linked to the DNA termini have been shown to be mostly stacked at the end of the helix, while cyanines linked to the DNA internally are believed to partially bind to the minor or major grooves. These interactions not only affect the photophysical properties of the probes but also create a large uncertainty in their orientation.

Distance-dependent interactions between gold nanoparticles and fluorescent molecules with DNA as tunable spacers

Using stoichiometrically controlled 1:1 functionalization of gold nanoparticles with fluorescent dye molecules in which the dye molecule is held away from the particle surface by a rigid DNA spacer allows precise determination of the distance-dependent effect of the metal nanoparticles on fluorescence intensity. Two dyes were studied, Cy3 and Cy5, with two sizes of nanoparticles, 5 and 10 nm. The larger the particle, the more quenching of the photoluminescence (PL) intensity, due to increased overlap of the dye's emission spectrum with the Au surface plasmon resonance. Fluorescence is quenched significantly for distances somewhat larger than the particle diameter, in good agreement with the predictions of an electrodynamics model based on interacting dipoles. The distance dependence of surface energy transfer behavior, i.e. quenching efficiency, is proportional to 1/d(4), which involves no consideration of the size of the particle and the spectral overlap of the dye and AuNp. This surface energy transfer model is found qualitatively and agrees with the electrodynamic model, though the exponent is greater than 4 for the smaller nanoparticles (5 nm), and smaller than 4 for the larger nanoparticles (10 nm).

DNA sequence-dependent enhancement of Cy3 fluorescence

Cyanine dyes are extensively used as fluorescent probes in molecular biology, biochemical and biophysical applications. We investigated the fluorescent properties of Cy3 covalently attached to the 5' terminus of DNA oligonucleotides, and demonstrated that its fluorescence efficiency and lifetime depend strongly on DNA sequence. DNA sequence determines the extent and nature of the interactions between the dye and the DNA bases, which are responsible for the unusual enhancement in fluorescence observed for a large number of oligonucleotides. Results are discussed in terms of a photoisomerization mechanism that deactivates the excited state and thus competes with fluorescence. The efficiency of isomerization decreases when Cy3-DNA interactions prevent rotation around the double bonds, resulting in an increase in the lifetime of the singlet excited state. We have shown that the ability of Cy3 to interact with DNA depends on the flexibility of the oligonucleotide and the presence of purines in the chain.