Treatment of 2,4-D, mecoprop, and dicamba using membrane bioreactor technology

Advances in identifying and managing emerging contaminants in aquatic ecosystems: Analytical approaches, toxicity assessment, transformation pathways, environmental fate, and remediation strategies

Emerging contaminants (ECs) are increasingly recognized as threats to human health and ecosystems. This review evaluates advanced analytical methods, particularly mass spectrometry, for detecting ECs and understanding their toxicity, transformation pathways, and environmental distribution. Our findings underscore the reliability of current techniques and the potential of upcoming methods. The adverse effects of ECs on aquatic life necessitate both in vitro and in vivo toxicity assessments. Evaluating the distribution and degradation of ECs reveals that they undergo physical, chemical, and biological transformations. Remediation strategies such as advanced oxidation, adsorption, and membrane bioreactors effectively treat EC-contaminated waters, with combinations of these techniques showing the highest efficacy. To minimize the impact of ECs, a proactive approach involving monitoring, regulations, and public education is vital. Future research should prioritize the refining of detection methods and formulation of robust policies for EC management.

Occurrence, ecological risk, and advanced removal methods of herbicides in waters: a timely review

Coastal pollution caused by the importation of agricultural herbicides is one of the main environmental problems that directly affect the coastal primary productivity and even the safety of human seafood. It is urgent to evaluate the ecological risk objectively and explore feasible removal strategies. However, existing studies focus on the runoff distribution and risk assessment of specific herbicides in specific areas, and compared with soil environment, there are few studies on remediation methods for water environment. Therefore, we systematically reviewed the current situation of herbicide pollution in global coastal waters and the dose-response relationships of various herbicides on phytoplankton and higher trophic organisms from the perspective of ecological risks. In addition, we believe that compared with the traditional single physical and chemical remediation methods, biological remediation and its combined technology are the most promising methods for herbicide pollution remediation currently. Therefore, we focus on the application prospects, challenges, and management strategies of new bioremediation systems related to biology, such as constructed wetlands, membrane bioreactor processes, and microbial co-metabolism, in order to provide more advanced methods for reducing herbicide pollution in the water environment.

Effect of dissolved organic carbon on micropollutant biodegradation by aquifer and soil microbial communities

Groundwater, a major source of drinking water worldwide, is often contaminated with micropollutants. Although microbial communities in aquifers and soils have the capability to biodegrade some micropollutants, this process is limited in situ. Biostimulation with dissolved organic carbon (DOC) is known to promote micropollutant biodegradation, but the role of DOC biodegradability is still poorly understood. This study investigated how three DOC types with different biodegradability (humics, dextran and acetate) affect the biodegradation of 15 micropollutants by aquifer and soil microbial communities under aerobic and nitrate reducing conditions. Although originating from different environments, both communities were able to biodegrade the same 4 micropollutants under aerobic conditions - 2,4-D, MCPP, chloridazon (CLZ) and chloridazon-desphenyl. However, DOC addition only affected MCPP biodegradation, promoting MCPP biodegradation regardless of DOC biodegradability. Biodegradation of 2,4-D, MCPP and CLZ under aerobic conditions was observed after a lag phase, whose duration differed per compound. 2,4-D was biodegraded first and fully. Aquifer community was able to degrade about half of the initial MCPP concentration (removal efficiency of 49.3 ± 11.7%). CLZ was fully biodegraded by the aquifer community, but not by the soil community, possibly due to substrate competition with organics originating from the inoculum. Therefore, the natural organic carbon present in the inocula and in environmental systems can influence micropollutant biodegradation. Under nitrate reducing conditions micropollutant biodegradation was not observed nor biostimulated by DOC addition. The results also highlight the importance of sufficient exposure time to trigger in situ micropollutant biodegradation.

Fate of pesticides in agricultural runoff treatment systems: Occurrence, impacts and technological progress

The levels of pesticides in air, water, and soil are gradually increasing due to its inappropriate management. In particular, agricultural runoff inflicts the damages on the ecosystem and human health at massive scale. Present study summarizes 70 studies in which investigations on removal or treatment of pesticides/insecticides/herbicides are reported. A bibliometric analysis was also done to understand the recent research trends through the analysis of 2218 publications. The specific objectives of this study are as follows: i) to inventorize the characteristics details of agriculture runoff and analyzing the occurrence and impacts of pesticides, ii) analyzing the role and interaction of pesticides in different environmental segments, iii) investigating the fate of pesticides in agriculture runoff treatment systems, iv) summarizing the experiences and findings of most commonly technology deployed for pesticides remediation in agriculture runoff including target pesticide(s), specifications, configuration of technological intervention. Among the reported technologies for pesticide treatment in agriculture runoff, constructed wetland was at the top followed by algal or photobioreactor. Among various advanced oxidation processes, photo Fenton method is mainly used for pesticides remediation such as triazine, methyl parathion, fenuron and diuron. Algal bioreactors are extensively used for a wide range of pesticides treatment including 2,4-Dichlorophenoxyacetic acid, 2-methyl-4-chlorophenoxyacetic acid, alachlor, diuron, chlorpyrifos, endosulfan, and imidacloprid; especially at lower hydraulic retention time of 2-6 h. This study highlights that hybrid approaches can offers potential opportunities for effective removal of pesticides in a more viable manner.

Recent approaches and advanced wastewater treatment technologies for mitigating emerging microplastics contamination - A critical review

Microplastics have been identified as an emerging pollutant due to their irrefutable prevalence in air, soil, and particularly, the aquatic ecosystem. Wastewater treatment plants (WWTPs) are seen as the last line of defense which creates a barrier between microplastics and the environment. These microplastics are discharged in large quantities into aquatic bodies due to their insufficient containment during water treatment. As a result, WWTPs are regarded as point sources of microplastics release into the environment. Assessing the prevalence and behavior of microplastics in WWTPs is therefore critical for their control. The removal efficiency of microplastics was 65 %, 0.2-14 %, and 0.2-2 % after the successful primary, secondary and tertiary treatment phases in WWTPs. In this review, other than conventional treatment methods, advanced treatment methods have also been discussed. For the removal of microplastics in the size range 20-190 μm, advanced treatment methods like membrane bioreactors, rapid sand filtration, electrocoagulation and photocatalytic degradation was found to be effective and these methods helps in increasing the removal efficiency to >99 %. Bioremediation based approaches has found that sea grasses, lugworm and blue mussels has the ability to mitigate microplastics by acting as a natural trap to the microplastics pollutants and could act as candidate species for possible incorporation in WWTPs. Also, there is a need for controlling the use and unchecked release of microplastics into the environment through laws and regulations.

Environmental-friendly hydrochar-montmorillonite composite for efficient catalytic degradation of dicamba and alleviating its damage to crops

In recent years, carbon-based materials catalyzing peroxymonosulfate (PMS) for green degradation of persistent organic pollutants have attracted increasing attention. However, PMS activation by hydrochar composite (e.g. hydrochar-montomorillonite) has rarely been investigated. Herein, a simple preparation, low-cost and eco-friendly catalyst of hydrochar-montmorillonite composite (HC-Mt) was prepared to firstly catalyze PMS for the degradation of dicamba (DIC). The as-prepared HC-Mt showed a remarkably better catalyzing performance for PMS than pure hydrochar (HC) due to its good physicochemical characteristics and abundant oxygen-containing groups. Furthermore, the electron spin resonance (ESR) and quenching tests revealed that active species such as SO₄^-, OH and O₂^- all participated in the degradation process. DIC sites on C6, Cl 10, and O15 exhibited higher reactivity according to the density functional theory (DFT) calculation, which were easily attacked by active species. The DIC degradation mainly occurred via hydroxyl substitution, decarboxylation, oxidation and ring-cleavage and finally most of the intermediates were mineralized into CO₂ and H₂O. Finally, the phytotoxicity assessment was measured by the germination growth situation of tobacco and mung beans in the presence of DIC (with or without treatment by HC-Mt/PMS). The result showed that HC-Mt/PMS could significantly reduce the phytotoxicity of DIC to crops, suggesting that catalyzing PMS using HC-Mt was environmentally friendly. Therefore, this work did not only provide a novel catalyzing PMS strategy using hydrochar composite for wastewater treatment, but also give a new idea for herbicide phytotoxicity management.

Tricks and tracks in removal of emerging contaminants from the wastewater through hybrid treatment systems: A review

In recent years, many biological and physicochemical treatment technologies have been investigated for the removal of the emerging contaminants (ECs) from the wastewater matrix. However, due to the deficiency of these treatments to completely degrade the ECs in wastewater, hybrid systems were explored using the distinguishing removal potential of the different treatment processes. This review gives an insight on such hybrid systems combining several physical, chemical and biological treatments for the fast and eco-efficient removal of ECs from wastewater. Most of the hybrid systems have applied biological treatments first and then physical or chemical treatments. The hybrid system of membrane bioreactor (MBR) followed by membrane filtrations (RO/NF) effectively removed a suite of ECs such as pharmaceuticals, beta blockers, pesticides and EDCs. Some of the hybrid systems of constructed wetlands and waste stabilization ponds showed promising potential for the biosorptive removal of pharmaceuticals and some beta blockers. The hybrid systems combining activated sludge process and physical processes such as ultrafiltration (UF), reverse osmosis (RO) and gamma radiations are considered as the cost effective technologies and had better removal of trace organic pollutants. The hybrid system of MBR coupled with UV oxidation, activated carbon and ultrasound, and ozonation followed by ultrasounds, completely degraded some ECs and many pharmaceuticals. The review also synthesizes the trend followed by the hybrid system processes for the removal of various categories of ECs. The future research directions for the ECs removal utilizing hybrid nanocomposites and green sustainable technology have been suggested.

Bioreactor-based advances in plant tissue and cell culture: challenges and prospects

Bioreactors are engineered systems capable of supporting a biologically active situation for conducting aerobic or anaerobic biochemical processes. Stability, operational ease, improved nutrient uptake capacity, time- and cost-effectiveness, and large quantities of biomass production, make bioreactors suitable alternatives to conventional plant tissue and cell culture (PTCC) methods. Bioreactors are employed in a wide range of plant research, and have evolved over time. Such technological progress, has led to remarkable achievements in the field of PTCC. Since the classification of bioreactors has been extensively reviewed in numerous reviews, the current article avoids repeating the same material. Alternatively, it aims to highlight the principal advances in the bioreactor hardware s used in PTCC rather than classical categorization. Furthermore, our review summarizes the most significant steps as well as current state-of-the-art of PTCC carried out in various types of bioreactor.

Development of graphene oxide/chitosan composite membrane on ceramic support for atrazine remediation by MBR process

Graphene oxide (GO)-based composite ultrafiltration (UF) membranes were prepared on macroporous ceramic support tubes following a new way. Chitosan was used as an intermediate matrix between the substrate and GO coating. It has hydroxyl and amine groups, which enhances its film forming capacity with hydrophilic GO. This led us to use them as precursors for membrane development. Process efficiency of the prepared UF membrane was assessed in terms of the removal of toxic pesticide atrazine in side-stream membrane bioreactor (MBR) processes. Response surface methodology (RSM) was used to optimize the atrazine biodegradation efficiency. Enhanced atrazine removal of > 95% was obtained in the MBR treatment at the optimized conditions. Hermia's model equations were applied to analyze the mechanism of membrane fouling in the UF-MBR system. The influencing parameters were studied in details and pneumatic backpulsing was applied to minimize fouling in the UF-MBR system by statistical analysis. Mixed liquor suspended solids (MLSS) was found to affect both atrazine biodegradation and membrane fouling; hence, its effect was thoroughly analyzed. The developed process hence proved to be highly proficient in terms of such organic pesticides removal for long-term operations.

Developing ionic liquid forms of picloram with reduced negative effects on the aquatic environment

As a widely used herbicide, picloram has been frequently detected in the aquatic environment due to its high leaching potential and low adsorption by soil. To reduce aquatic environmental risk of this herbicide caused by leaching and runoff, five herbicidal ionic liquids (HILs) based on picloram were prepared by pairing isopropylamine, octylamine, octadecylamine, 1-methylimidazole, 4-methylmorpholine respectively. Their physicochemical properties including water solubility, octanol-water partition coefficient, surface activity, leaching, as well as soil adsorption were compared. The results showed that these properties could be adjusted by appropriate selection of counter cations. The HILs with long alkyl chains in cations had low water solubility and leaching characteristics, good surface tension and lipophilicity, as well as high soil adsorption. Compared with currently used picloram in the forms of potassium salts, HIL3 had more excellent herbicidal activity against broadleaf weeds and may offer a lower use dosage. The HILs based on picloram can reduce its negative effects on the aquatic environment and can be used as a desirable alternative to commercial herbicidal formulations of picloram in future.

Progress in the biological and chemical treatment technologies for emerging contaminant removal from wastewater: A critical review

This review focuses on the removal of emerging contaminants (ECs) by biological, chemical and hybrid technologies in effluents from wastewater treatment plants (WWTPs). Results showed that endocrine disruption chemicals (EDCs) were better removed by membrane bioreactor (MBR), activated sludge and aeration processes among different biological processes. Surfactants, EDCs and personal care products (PCPs) can be well removed by activated sludge process. Pesticides and pharmaceuticals showed good removal efficiencies by biological activated carbon. Microalgae treatment processes can remove almost all types of ECs to some extent. Other biological processes were found less effective in ECs removal from wastewater. Chemical oxidation processes such as ozonation/H₂O₂, UV photolysis/H₂O₂ and photo-Fenton processes can successfully remove up to 100% of pesticides, beta blockers and pharmaceuticals, while EDCs can be better removed by ozonation and UV photocatalysis. Fenton process was found less effective in the removal of any types of ECs. A hybrid system based on ozonation followed by biological activated carbon was found highly efficient in the removal of pesticides, beta blockers and pharmaceuticals. A hybrid ozonation-ultrasound system can remove up to 100% of many pharmaceuticals. Future research directions to enhance the removal of ECs have been elaborated.

Fenton's treatment of actual agriculture runoff water containing herbicides

This research was to study the efficiency of the Fenton's treatment process for the removal of three herbicides, namely 2,4-dichlorophenoxy acetic acid (2,4-D), ametryn and dicamba from the sugarcane field runoff water. The treatment process was designed with the Taguchi approach by varying the four factors such as H₂O₂/COD (1-3.5), H₂O₂/Fe²⁺ (5-50), pH (2-5) and reaction time (30-240 min) as independent variables. Influence of these parameters on chemical oxygen demand (COD), ametryn, dicamba and 2,4-D removal efficiencies (dependent variables) were investigated by performing signal to noise ratio and other statistical analysis. The optimum conditions were found to be H₂O₂/COD: 2.125, H₂O₂/Fe²⁺: 27.5, pH: 3.5 and reaction time of 135 min for removal efficiencies of 100% for ametryn, 95.42% for dicamba, 88.2% for 2,4-D and with 75% of overall COD removal efficiencies. However, the percentage contribution of H₂O₂/COD ratio was observed to be significant among all four independent variables and were 44.16%, 67.57%, 51.85% and 50.66% for %COD, ametryn, dicamba and 2,4-D removal efficiencies, respectively. The maximum removal of herbicides was observed with the H₂O₂ dosage of 5.44 mM and Fe²⁺ dosage of 0.12 mM at pH 3.5.

Comparative study on the biodegradability of morpholinium herbicidal ionic liquids

This study focused on evaluating the toxicity as well as primary and ultimate biodegradability of morpholinium herbicidal ionic liquids (HILs), which incorporated MCPA, MCPP, 2,4-D or Dicamba anions. The studied HILs were also subjected to determination of surface active properties in order to assess their influence on toxicity and biodegradability. The study was carried out with microbiota isolated from different environmental niches: sediments from river channel, garden soil, drainage trench collecting agricultural runoff stream, agricultural soil and municipal waste repository. The obtained results revealed that resistance to toxicity and biodegradation efficiency of the microbiota increased in the following order: microbiota from the waste repository > microbiota from agricultural soil ≈ microbiota from an agricultural runoff stream > microbiota from garden soil > microbiota from the river sludge. It was observed that the toxicity of HILs increased with the hydrophobicity of the cation, however the influence of the anion was more notable. The highest toxicity was observed when MCPA was used as the anion (EC₅₀ values ranging from 60 to 190 mg L⁻¹). The results of ultimate biodegradation tests indicated that only HILs with 2,4-D as the anion were mineralized to some extent, with slightly higher values for HILs with the 4-decyl-4-ethylmorpholinium cation (10–31 %) compared to HILs with the 4,4-didecylmorpholinium cation (9–20 %). Overall, the cations were more susceptible (41–94 %) to primary biodegradation compared to anions (0–61 %). The obtained results suggested that the surface active properties of the studied HILs may influence their toxicity and biodegradability by bacteria in different environmental niches.

The presence of the top prescribed pharmaceuticals in treated sewage effluents and receiving waters in Southwest Nova Scotia, Canada

From a list of the top prescribed drugs in Canada, 11 pharmaceuticals and two metabolites were selected for study in municipal sewage treatment plant effluents and receiving waters. Wastewater samples were collected from 16 wastewater treatment plants across Southwest Nova Scotia including the Annapolis Valley, South Shore, and Metropolitan Halifax. Samples were also collected between 100 and 200 m downstream of effluent outflows. Seven pharmaceuticals were found above μg/L levels with their highest concentrations as follows: metformin (10.6 μg/L), acetaminophen (28.9 μg/L), paraxanthine (18.2 μg/L), cotinine (3.10 μg/L), caffeine (115 μg/L), naproxen (29.1 μg/L), and venlafaxine (2.65 μg/L). Metformin, paraxanthine, caffeine, naproxen, ramipril, and venlafaxine were detected in every wastewater effluent sample. Statistical analysis revealed significant differences in pharmaceutical occurrence by treatment methods, weak dependence of pharmaceutical concentrations on populations, and the co-occurrence of some pharmaceuticals. Experimental results might indicate the limitation of primary only treatment methods in breaking down pharmaceuticals.

Strategies of management for the whole treatment of leachates generated in a landfill and in a composting plant

This study compares the leachates generated in the treatment of Municipal Solid Wastes (MSW) of similar origin but managed in two different ways: (a) sorting and composting in a Treatment Plant in Aranda de Duero (Burgos, Spain), and (b) direct dumping in a landfill in Aranda de Duero (Burgos, Spain) with no prior treatment. Two different leachates were considered for the former: those generated in the fermentation shed (P1) and those generated in the composting tunnels (P2); another leachate was collected from the landfill (P3). Physical and chemical properties, including heavy metal contents, were seasonally monitored in the different leachates. This study allowed us to conclude that the sampling season had a significant effect on Pb, Cd, Ni, Mg and total-N contents (P < 0.01). Similarly, leachates P1, P2 and P3 exhibited significant overall differences for most of the measured parameters except for Cd, Cu, Pb, K, Fe, C-inorg and C-org contents (P < 0.01). This study concludes with the feasibility of a whole treatment for both leachates using ultrafiltration in a membrane bioreactor (MBR).

On-line monitoring of the photocatalytic degradation of 2,4-D and dicamba using a solid-phase extraction-multisyringe flow injection system

A fully automated on-line system for monitoring the photocatalytic degradation of herbicides was developed using multisyringe flow injection analysis (MSFIA) coupled to a solid phase extraction (SPE) unit with UV detection. The calibration curves were linear in the concentration range of 100-1000 μg L(-1) for 3,6-dichloro-2-methoxybenzoic acid (dicamba) and 500-3000 μg L(-1) for 2,4-dichlorophenoxyacetic acid (2,4-D), while the detection limits were 30 and 135 μg L(-1) for dicamba and 2,4-D, respectively. The monitoring of the photocatalytic degradation (TiO2 anatase/UV 254 nm) of these two herbicides was performed by MSFIA-SPE system using a small sample volume (2 mL) in a fully automated approach. The degradation was assessed in ultrapure and drinking water with initial concentrations of 1000 and 2000 μg L(-1) for dicamba and 2,4-D, respectively. Degradation percentages of approximately 85% were obtained for both herbicides in ultrapure water after 45 min of photocatalytic treatment. A similar degradation efficiency in drinking water was observed for 2,4-D, whereas dicamba exhibited a lower degradation percentage (75%), which could be attributed to the presence of inorganic species in this kind of water.

Membrane bioreactor technology: a novel approach to the treatment of compost leachate

Compost leachate forms during the composting process of organic material. It is rich in oxidizable organics, ammonia and metals, which pose a risk to the environment if released without proper treatment. An innovative method based on the membrane bioreactor (MBR) technology was developed to treat compost leachate over 39days. Water quality parameters, such as pH, dissolved oxygen, ammonia, nitrate, nitrite and chemical oxygen demand (COD) were measured daily. Concentrations of caffeine and metals were measured over the course of the experiment using gas chromatography - mass spectrometry (GC/MS) and inductively coupled plasma - mass spectrometry (ICP-MS) respectively. A decrease of more than 99% was achieved for a COD of 116g/L in the initial leachate. Ammonia was decreased from 2720mg/L to 0.046mg/L, while the nitrate concentration in the effluent rose to 710mg/L. The bacteria in the MBR system adjusted to the presence of the leachate, and increased 4 orders of magnitude. Heavy metals were removed by at least 82.7% except copper. These successful results demonstrated the membrane bioreactor technology is feasible, efficient method for the treatment of compost leachate.