Effects of fullerene (C60), multi-wall carbon nanotubes (MWCNT), single wall carbon nanotubes (SWCNT) and hydroxyl and carboxyl modified single wall carbon nanotubes on riverine microbial communities

An informative short-term study on the impacts of a triclocarban/weathered multi-walled carbon nanotube-adsorbed complex to benthic organisms

Freshwater organisms are suitable models to study the fate of environmental pollutants. Due to their versatile and everyday use, many environmental pollutants such as triclocarban (TCC) or multi-walled carbon nanotubes (MWCNTs) enter environmental compartments very easily. TCC is known as a disinfectant and is declared as a highly aquatic toxicant. Multi-walled carbon nanotubes are used, e.g., in the automotive industry to improve plastic properties. Both TCCs and MWCNTs can pose major pollution hazards to various organisms. In addition, these substances can bind to each other due to their tendency to interact via strong hydrophobic interactions. Therefore, a short-term test was conducted to investigate the effects of the individual chemicals TCC and weathered MWCNTs (wMWCNTs) on a benthic biofilm and a grazing organism, Lymnaea stagnalis. Furthermore, the two compounds were coupled by an adsorption experiment resulting in a coupled complex formation (TCC + wMWCNTs). L. stagnalis showed no effects in terms of mortality. For benthic biofilm, the coupling test (TCC + wMWCNTs) showed a decrease of 58% in chlorophyll a (Chl-a) concentration. The main effect could be attributed to the wMWCNTs' exposure alone (decrease of 82%), but not to presence of TCC. The concentration range of Chl-a upon TCC exposure alone was comparable to that in the control group (32 and 37 µg/cm2). With respect to the particulate organic carbon (POC) concentration, very similar results were found for the solvent control, the TCC, and also for the TCC + wMWCNTs group (3, 2.9, and 2.9 mg/cm2). In contrast to the control, a significant increase in POC concentration (100%) was observed for wMWCNTs, but no synergistic effect of TCC + wMWCNTs was detected.

A cohesive effort to assess the suitability and disparity of carbon nanotubes for water treatment

Population growth, industrialization, and the extensive use of chemicals in daily life have all contributed to an increase in waste generation and an intensified release of organic pollutants into the aquatic environment. To ensure the quality of water (including natural resources), the removal of these pollutants from wastewater has become a challenging task for scientific community. Conventional physical, chemical, and biological treatment methods are commonly used in combinations and are not very effective. Recently, carbon nanotubes (CNTs) emerged as the most reliable and adaptable choice for efficient water treatment due to their extraordinary material properties appearing as a single-step solution for water treatment. High surface area, exceptional porosities, hollow and layered structures, and ease of chemical activation and functionalization are some properties which makes it excellent adsorption material. Hence, this review paper discusses the recent advances in the synthesis, purification, and functionalization of CNTs for water and wastewater treatment. In addition, this study also also provides a quick overview of CNTs-based advance technologies employed in water treatment and carefully assesses the benefits versus risks during large-scale water treatment. Furthermore, it concludes that identified risks to the environment and human health cannot be easily ignored and strict regulatory requirements are a must for producing low-cost innoxious CNTs.

The Comparative Toxic Impact Assessment of Carbon Nanotubes, Fullerene, Graphene, and Graphene Oxide on Marine Microalgae Porphyridium purpureum

The growing production and application of carbon-based nanomaterials (CNMs) represent possible risks for aquatic systems. However, the variety of CNMs with different physical and chemical properties and different morphology complicate the understanding of their potential toxicity. This paper aims to evaluate and compare the toxic impact of the four most common CNMs, namely multiwalled carbon nanotubes (CNTs), fullerene (C60), graphene (Gr), and graphene oxide (GrO) on the marine microalgae Porphyridium purpureum. The microalgae cells were exposed to the CNMs for 96 h and measured by flow cytometry. Based on the obtained results, we determined no observed effect level (NOEL), and calculated EC10 and EC50 concentrations for growth rate inhibition, esterase activity, membrane potential, and reactive oxygen species (ROS) generation changes for each tested CNM. According to the sensitivity (growth rate inhibition) of P. purpureum, the used CNMs can be listed in the following order (EC50 in mg/L, 96 h): CNTs (2.08) > GrO (23.37) > Gr (94.88) > C60 (>131.0). The toxicity of CNTs was significantly higher than the toxic effect of the other used CNMs, and only this sample caused an increase in ROS generation in microalgae cells. This effect was apparently caused by the high affinity between particles and microalgae associated with the presence of exopolysaccharide coverage on P. purpureum cells.

Review on lignocellulose valorization for nanocarbon and its composites: Starting from laboratory studies to business application

This study concerns a scoping and literature review of nanocarbon and its composites with details on specific propositions, including nanocarbon history, nanocarbon types, and lignocellulose nanocarbon types, properties, applications, toxicity, regulation, and business model for commercialization. The review brings novelties, comprehensively expounding on laboratory studies and industrial applications of biomass or lignocellulose materials-derived nanocarbon and its composites. Since its first discovery in the form of Buckyball in 1985, nanocarbon has brought interest to scientists and industries for applications. From the previous studies, it is discovered that many types of nanocarbon are sourced from lignocellulose materials. With their excellent properties of nanomaterials, nanocarbon has been harnessed for such as reinforcing and filler agents for nanocomposites or direct use of individual nanocarbon for specific purposes. However, the toxicological properties of nanocarbon have delivered a level of concern in its use and application. In addition, with the radically growing increase in the use of nanocarbon, policies have been enacted in several countries that rule on the use of nanocarbon. The business model for the commercialization of lignocellulose-based nanocarbon was also proposed in this study. This study can showcase the importance of both individual nanocarbon and nanocarbon-based composites for industrial implementations by considering their synthesis, properties, application, country legislations/regulations, and business model. The studies also can be the major references for researchers to partner with industries and governments in investing in lignocellulose-sourced nanocarbon potential research, development, and policies.

Multiwalled Carbon Nanotubes Promote Bacterial Conjugative Plasmid Transfer

Multiwalled carbon nanotubes (MWCNTs) regularly enter aquatic environments due to their ubiquity in consumer products and engineering applications. However, the effects of MWCNT pollution on the environmental microbiome are poorly understood. Here, we evaluated whether these carbon nanoparticles can elevate the spread of antimicrobial resistance by promoting bacterial plasmid transfer, which has previously been observed for copper nanomaterials with antimicrobial properties as well as for microplastics. Through a combination of experimental liquid mating assays between Pseudomonas putida donor and recipient strains with plasmid pKJK5::gfpmut3b and mathematical modeling, we here demonstrate that the presence of MWCNTs leads to increased plasmid transfer rates in a concentration-dependent manner. The percentage of transconjugants per recipient significantly increased from 0.21 ± 0.04% in absence to 0.41 ± 0.09% at 10 mg L-1 MWCNTs. Similar trends were observed when using an Escherichia coli donor hosting plasmid pB10. The identified mechanism underlying the observed dynamics was the agglomeration of MWCNTs. A significantly increased number of particles with >6 μm diameter was detected in the presence of MWCNTs, which can in turn provide novel surfaces for bacterial interactions between donor and recipient cells after colonization. Fluorescence microscopy confirmed that MWCNT agglomerates were indeed covered in biofilms that contained donor bacteria as well as elevated numbers of green fluorescent transconjugant cells containing the plasmid. Consequently, MWCNTs provide bacteria with novel surfaces for intense cell-to-cell interactions in biofilms and can promote bacterial plasmid transfer, hence potentially elevating the spread of antimicrobial resistance. IMPORTANCE In recent decades, the use of carbon nanoparticles, especially multiwalled carbon nanotubes (MWCNTs), in a variety of products and engineering applications has been growing exponentially. As a result, MWCNT pollution into environmental compartments has been increasing. We here demonstrate that the exposure to MWCNTs can affect bacterial plasmid transfer rates in aquatic environments, an important process connected to the spread of antimicrobial resistance genes in microbial communities. This is mechanistically explained by the ability of MWCNTs to form bigger agglomerates, hence providing novel surfaces for bacterial interactions. Consequently, increasing pollution with MWCNTs has the potential to elevate the ongoing spread of antimicrobial resistance, a major threat to human health in the 21st century.

A workflow to investigate the impacts of weathered multi-walled carbon nanotubes to the mud snail Lymnaea stagnalis

Although the development and application of nanomaterials is a growing industry, little data is available on the ecotoxicological effects on aquatic organisms. Therefore, we set up a workflow to address the potential uptake of weathered multi-walled carbon nanotubes (wMWCNTs) by a model organism, the pulmonary mud snail Lymnaea stagnalis (L. stagnalis), which plays an important role in the food web. It represents a suitable organism for this approach because as a grazer it potentially ingests large amounts of sedimented wMWCNTs. As food source for L. stagnalis, benthic biofilm was investigated by the use of a transmission electron microscope (TEM) and a scanning electron microscope (SEM) after exposure with wMWCNTs. In addition, isotopic labeling was applied with ¹⁴C-wMWCNTs (0.1 mg/L) to quantify fate, behavior, and enrichment of ¹⁴C-wMWCNTs in benthic biofilm and in L. stagnalis. Enrichment in benthic biofilm amounted to 529.0 µg wMWCNTs/g dry weight and in L. stagnalis to 79.6 µg wMWCNTs/g dry weight. A bioconcentration factor (BCF) for L. stagnalis was calculated (3500 L/kg). We demonstrate the accumulation of wMWCNTs (10 mg/L) in the digestive tract of L. stagnalis in an effect study. Moreover, the physiological markers glycogen and triglycerides as indicators for the physiological state, as well as the RNA/DNA ratio as growth indicator, were examined. No significant differences between exposed and control animals were analyzed for glycogen and triglycerides after 24 days of exposure, but a decreasing trend is recognizable for triglycerides. In contrast, the significant reduction in the RNA/DNA ratio of L. stagnalis indicated an inhibition of growth with a following recovery after depuration. The described workflow enables a comprehensive determination of the fate and the behavior of wMWCNTs specifically and in general all kinds of CNTs in the aquatic environment and therefore contributes to a holistic risk assessment of wMWCNTs.

The Influence of Zinc Oxide with Carbon Nanotube Composite NanoMaterials on Antibacterial Activity

A novel hybrid substance, ZnO: MWCNT, are fabricated from prepared pellets using a pulsed laser ablation liquid technique at varied MWCNT concentrations (0, 3, 5, 10, and 15) wt%. The study cast at the effect of MWCNT concentration on the structure of prepared samples using FTIR and tested for different types of antimicrobial activity. From FTIR examination, one can observe that all the prepared ZnO: MWCNT samples with different concentrations have different types of band (stretching and bending). All the prepared composite samples with various concentrations have showed influence on different types of bacterial, however in general the annealing ZnO, MWCNT and the composite nanomaterial with 15%MWCNT have higher zone of antibacterial activity for studying types of bacterial inhibition.

Graphene-Based Nanomaterials Modulate Internal Biofilm Interactions and Microbial Diversity

Graphene-based nanomaterials (GBMs), such as graphene oxide (GO) and reduced graphene oxide (rGO), possess unique properties triggering high expectations for the development of new technological applications and are forecasted to be produced at industrial-scale. This raises the question of potential adverse outcomes on living organisms and especially toward microorganisms constituting the basis of the trophic chain in ecosystems. However, investigations on GBMs toxicity were performed on various microorganisms using single species that are helpful to determine toxicity mechanisms but fail to predict the consequences of the observed effects at a larger organization scale. Thus, this study focuses on the ecotoxicological assessment of GO and rGO toward a biofilm composed of the diatom Nitzschia palea associated to a bacterial consortium. After 48 and 144 h of exposure to these GBMs at 0, 0.1, 1, and 10 mg.L⁻¹, their effects on the diatom physiology, the structure, and the metabolism of bacterial communities were measured through the use of flow cytometry, 16S amplicon sequencing, and Biolog ecoplates, respectively. The exposure to both of these GBMs stimulated the diatom growth. Besides, GO exerted strong bacterial growth inhibition as from 1 mg.L⁻¹, influenced the taxonomic composition of diatom-associated bacterial consortium, and increased transiently the bacterial activity related to carbon cycling, with weak toxicity toward the diatom. On the contrary, rGO was shown to exert a weaker toxicity toward the bacterial consortium, whereas it influenced more strongly the diatom physiology. When compared to the results from the literature using single species tests, our study suggests that diatoms benefited from diatom-bacteria interactions and that the biofilm was able to maintain or recover its carbon-related metabolic activities when exposed to GBMs.

Multi-omics analyses reveal molecular mechanisms for the antagonistic toxicity of carbon nanotubes and ciprofloxacin to Escherichia coli

With the increasing production and application, engineered nanomaterials (ENMs) are being discharged into the environment, where they can interact with co-existing contaminants, causing complicated joint toxicity to organisms that needs to be studied. The case study of ENMs-contaminant joint toxicity and the understanding of relative mechanisms are very insufficient, particularly the mechanisms of molecular interactions and governing processes. Herein, a typical ENMs, carbon nanotubes (CNTs, 0-60 mg/L), and a common antibiotic, ciprofloxacin (CIP, 0-900 mg/L), were selected as the analytes. Their joint toxicity to a model microbe Escherichia coli was specifically investigated via biochemical, transcriptomics, and metabolomics approaches. The result revealed an antagonistic effect on growth inhibition between CNTs and CIP. Mitigations in cell membrane disruption and oxidative stress were involved in the antagonistic action. CIP (48.8-244 mg/L) decreased the bioaccumulation of CNTs (7.2 mg/L) via reducing cell-surface hydrophobicity and hindering the bio-nano interaction, which could attenuate the toxicity of CNTs to bacteria. CNTs (7.2 and 14.4 mg/L) alleviated the disturbance of CIP (122 and 244 mg/L) to gene expressions especially related to nitrogen compound metabolism, oxidoreductase activity, and iron-sulfur protein maturation, probably through relieving the CIP-induced inhibition of DNA gyrase activity. Further, CNTs (7.2 and 14.4 mg/L) offset the impact of CIP (122 and 244 mg/L) on bacterial metabolome via the regulation of biosynthesis of unsaturated fatty acids and metabolisms of some amino acids and glutathione. The findings shed new light on the molecular mechanisms by which ENMs present joint effect on contaminant toxicity, and provide important information for risk assessments of CNTs and fluoroquinolones in the environment.

Effects of carbon nanotubes on biodegradation of pollutants: Positive or negative?

Recently, a large quantity of carbon nanotubes (CNTs) enters the environment due to the increasing production and applications. More and more researches are focused on the fate and possible ecological risks of CNTs. Some literatures summarized the effects of CNTs on the chemical behavior and fate of pollutants. However, little reviewed the effects of CNTs on the biodegradation of pollutants. In general, the effects of CNTs on the biodegradation of pollutants and the related mechanisms were summarized in this review. CNTs have positive or negative effects on the biodegradation of contaminants by affecting the functional microorganisms, enzymes and the bioavailability of pollutants. CNTs may affect the microbial growth, activity, biomass, community composition, diversity and the activity of enzymes. The decrease of the bioavailability of pollutants due to the sorption on CNTs also causes the reduction of the biodegradation of contaminants. In addition, the roles of CNTs are controlled by multiple mechanisms, which are divided into three aspects i.e., properties of CNTs, environment condition, and microorganisms themself. The better understanding of the fate of CNTs and their impacts on the biochemical process in the environment is conducive to determine the release of CNTs into the environment.

Microscale and molecular analyses of river biofilm communities treated with microgram levels of cerium oxide nanoparticles indicate limited but significant effects

Cerium oxide (CeO₂) nanoparticles are used as in-fuel catalysts and in manufacturing processes, creating a potential for release to aquatic environments. Exposures at 1 and 10 μg/L CeO₂-nanoparticles were made to assess effects during the development of river biofilm communities. Scanning transmission x-ray microscopy (STXM) indicated extensive sorption of nanoparticles to the community and co-localization with lipid moieties. Following 8 weeks of development, polycarbonate coupons were removed from the reactors and used for molecular analyses, denaturing gradient gel electrophoresis analysis (DGGE-16S rRNA) and 16S rRNA amplicon sequencing. Microscopic imaging of the biofilm communities (bacterial, photosynthetic biomass, exopolymer composition, thickness, protozoan numbers), as well as carbon substrate utilization fingerprinting was performed. There was a trend toward reduced photosynthetic biomass, but no significant effects of CeO₂ exposure were found on photosynthetic and bacterial biomass or biofilm thickness. Sole carbon source utilization analyses indicated increased utilization of 10 carbon sources in the carbohydrate, carboxylic acid and amino acids categories related to CeO₂ exposures; however, predominantly, no significant effects (p < 0.05) were detected. Measures of microbial diversity, lectin binding affinities of exopolymeric substances and results of DGGE analyses, indicated significant changes to community composition (p < 0.05) with CeO₂ exposure. Increased binding of the lectin Canavalia ensiformis was observed, consistent with changes in bacterial-associated polymers. Whereas, no significant changes were observed in binding to residues associated with algal and cyanobacterial exopolymers. 16S rRNA amplicon sequencing of community DNA indicated changes in diversity and shifts in community composition; however, these did not trend with increasing CeO₂ exposure. Counting of protozoans in the biofilm communities indicated no significant effects on this trophic level. Thus, based on biomass and functional measures, CeO₂ nanoparticles did not appear to have significant effects; however, there was evidence of selection pressure resulting in significant changes in microbial community composition.

N,N-Diethyl-m-Toluamide Exposure at an Environmentally Relevant Concentration Influences River Microbial Community Development

Studies of the South Saskatchewan River confirmed that N,N-diethyl-m-toluamide (DEET) is ubiquitous at 10 to 20 ng/L, whereas in effluent-dominated Wascana Creek, levels of 100 to 450 ng/L were observed. Effects of DEET exposure were assessed in microbial communities using a wide variety of measures. Communities developed in rotating annular reactors with either 100 or 500 ng/L DEET, verified using gas chromatography-mass spectrometry analyses. Microscale analyses indicated that both DEET concentrations resulted in significant (p < 0.05) declines in photosynthetic biomass, whereas bacterial biomass was unaffected. There was no detectable effect of DEET on the levels of chlorophyll a. However, pigment analyses indicated substantial shifts in algal-cyanobacterial community structure, with reductions of green algae and some cyanobacterial groups at 500 ng/L DEET. Protozoan/micrometazoan grazers increased in communities exposed to 500 ng/L, but not 100 ng/L, DEET. Based on thymidine incorporation or utilization of carbon sources, DEET had no significant effects on metabolic activities. Fluorescent lectin-binding analyses showed significant (p < 0.05) changes in glycoconjugate composition at both DEET concentrations, consistent with altered community structure. Principal component cluster analyses of denaturing gradient gel electrophoresis indicated that DEET exposure at either concentration significantly changed the bacterial community (p < 0.05). Analyses based on 16S ribosomal RNA of community composition confirmed changes with DEET exposure, increasing detectable beta-proteobacteria, whereas actinobacteria and acidimicrobia became undetectable. Further, cyanobacteria in the subclass Oscillatoriophycideae were similarly not detected. Thus, DEET can alter microbial community structure and function, supporting the need for further evaluation of its effects in aquatic habitats. Environ Toxicol Chem 2019;38:2414-2425. © 2019 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals, Inc. on behalf of SETAC.

Long-term impacts of carboxyl functionalized multi-walled carbon nanotubes on the performance, microbial enzymatic activity and microbial community of sequencing batch reactor

The performance, microbial community and enzymatic activity of sequencing batch reactors (SBRs) were evaluated under long-term exposure of 0, 10 and 30 mg/L carboxyl functionalized multi-walled carbon nanotubes (MWCNTs-COOH). The presence of 10 mg/L MWCNTs-COOH displayed no adverse impacts on the COD and NH₄⁺-N removal of SBR, whereas 30 mg/L MWCNTs-COOH declined the COD and NH₄⁺-N removal. MWCNTs-COOH inhibited the denitrifying process and led to the accumulation of effluent NO₂^--N concentration. The inhibition of MWCNTs-COOH on the oxygen utilization rate, nitrogen removal rate and enzymatic activity of activated sludge gradually enhanced with the increase of operating time and influent MWCNTs-COOH concentration. MWCNTs-COOH stimulated more reactive oxygen species production and lactate dehydrogenase release, which might affect the microbial physiological functions and morphology. The microbial diversity and richness was declined evidently after long-term exposure of MWCNTs-COOH. The relative abundance of nitrifying and denitrifying bacteria showed some changes under MWCNTs-COOH stress.

Understanding the influence of carbon nanomaterials on microbial communities

Carbon nanomaterials (CNMs) are widely used because of their unique advantages in recent years. At the same time, the influence of CNMs on the environment is becoming increasingly prominent. This review mainly introduces the research progress in the effects of fullerenes, multi-walled carbon nanotubes (MWCNTs), single-walled carbon nanotubes (SWCNTs) and graphene on microorganisms and their toxicity mechanisms. On this basis, we have analyzed beneficial and adverse effects of fullerenes, graphene, MWCNTs and SWCNTs to microorganisms, and discussed the similarities of the toxicity mechanisms of different CNMs on microorganisms. This review helps provide ideas on how to protect microorganisms from the impacts of carbon nanomaterials, and it will be conductive to providing a strong theoretical basis for better application of carbon nanomaterials.

Toxicity of carbon nanomaterials to plants, animals and microbes: Recent progress from 2015-present

Nanotechnology has gained significant development over the past decades, which led to the revolution in the fields of information, medicine, industry, food security and aerospace aviation. Nanotechnology has become a new research hot spot in the world. However, we cannot only pay attention to its benefit to the society and economy, because its wide use has been bringing potential environmental and health effects that should be noticed. This paper reviews the recent progress from 2015-present in the toxicity of various carbon nanomaterials to plants, animals and microbes, and lays the foundation for further study on the environmental and ecological risks of carbon nanomaterials.

Fullerenes Influence the Toxicity of Organic Micro-Contaminants to River Biofilms

Organic micro-contaminants (OMCs) enter in freshwaters and interact with other contaminants such as carbon nanoparticles, becoming a problem of unknown consequences for river ecosystems. Carbon nanoparticles (as fullerenes C₆₀) are good adsorbents of organic contaminants and their interaction can potentially affect their toxicity to river biofilms. We tested the C₆₀ interactions with selected OMCs and their effects on river biofilms in different short-term experiments. In these, river biofilms were exposed to C₆₀ and three OMCs (triclosan, diuron, or venlafaxine) and their respective mixtures with fullerenes (C₆₀ + each OMC). The effects were evaluated on structural, molecular, and functional descriptors of river biofilms. Our results showed that C₆₀ did not cause toxic effects in river biofilms, whereas diuron and triclosan significantly affected the heterotrophic and phototrophic components of biofilms and venlafaxine affected only the phototrophic component. The joint exposure of C₆₀ with venlafaxine was not producing differences with respect to the former response of the toxicant, but the overall response was antagonistic (i.e., decreased toxicity) with diuron, and synergistic (i.e., increased toxicity) with triclosan. We suggest that differences in the toxic responses could be related to the respective molecular structure of each OMC, to the concentration proportion between OMC and C_60, and to the possible competition between C₆₀ pollutants on blocking the receptors of the biological cell membranes. We conclude that the presence of C₆₀ at low concentrations modified the toxicity of OMC to river biofilms. These interactions should therefore be considered when predicting toxicity of OMC in river ecosystems.

Ecotoxicological effects of carbon based nanomaterials in aquatic organisms

An increasing amount of carbon-based nanomaterials (CNM) (mostly fullerenes, carbon nanotubes and graphene) has been observed in aquatic systems over the last years. However, the potential toxicity of these CNM on aquatic ecosystems remains unclear. This paper reviews the existing literature on the toxic effects of CNM in aquatic organisms as well as the toxic effects of CNM through influencing the toxicity of other micro-pollutants, and outlines a series of research needs to reduce the uncertainty associated with CNMs toxic effects. The results show that environmental concentrations of CNM do not pose a threat on aquatic organisms on their own. The observed concentrations of CNM in aquatic environments are in the order of ngL^-1 or even lower, much below than the lowest observed effect concentrations (LOEC) on different aquatic organisms (in the order of mgL^-1). Toxic effects have been mainly observed in short-term experiments at high concentrations, and toxicity principally depends on the type of organisms, exposition time and CNM preparation methods. Moreover, we observed that CNM interact (establishing synergistic and/or antagonistic effects) with other micro-pollutants. Apparently, the resulting interaction is highly dependent on the chemical properties of each micro-pollutant, CNM acting either as carriers or as sorbents, thereby modifying the original toxicity of the contaminants. Results stress the need of studying the interactive effects of CNM with other micro-pollutants at environmental relevant concentrations, as well as their effects on biological communities in the long-term.

Review on the Antimicrobial Properties of Carbon Nanostructures

Swift developments in nanotechnology have prominently encouraged innovative discoveries across many fields. Carbon-based nanomaterials have emerged as promising platforms for a broad range of applications due to their unique mechanical, electronic, and biological properties. Carbon nanostructures (CNSs) such as fullerene, carbon nanotubes (CNTs), graphene and diamond-like carbon (DLC) have been demonstrated to have potent broad-spectrum antibacterial activities toward pathogens. In order to ensure the safe and effective integration of these structures as antibacterial agents into biomaterials, the specific mechanisms that govern the antibacterial activity of CNSs need to be understood, yet it is challenging to decouple individual and synergistic contributions of physical, chemical and electrical effects of CNSs on cells. In this article, recent progress in this area is reviewed, with a focus on the interaction between different families of carbon nanostructures and microorganisms to evaluate their bactericidal performance.

Plasmon-Induced Hot Electrons on Mesoporous Carbon for Decomposition of Organic Pollutants under Outdoor Sunlight Irradiation

In this study, a 4 in. CMK-8-Nafion membrane was fabricated using three-dimensional cubic ordered mesoporous carbon CMK-8 blended with a Nafion polymer. Plasmon-resonance hot electrons and holes from Au nanoparticles (NPs) combined with this CMK-8-Nafion membrane resulted in the effective decomposition of methyl orange (MO) due to the synergetic work of hot carriers with mesoporous carbon; a sample of Au/CMK-8-Nafion exposed to outdoor sunlight radiation for 150 min successfully removed 97% of MO. Fourier transform infrared spectroscopy (FTIR) was employed to examine the generation of hydroxyl groups (OH-) during decomposition. Finally, the spatial distribution of hydroxyl groups was also investigated across the different coverage densities of plasmonic Au NPs.

Near-infrared photoluminescence enhancement of N-acetyl-l-cysteine (NAC)-protected gold nanoparticles via fluorescence resonance energy transfer from NAC-stabilized CdTe quantum dots

Water-soluble N-acetyl-l-cysteine-protected gold nanoparticles (NAC-AuNPs) and NAC-stabilized cadmium telluride quantum dots (NAC-CdTeQDs) have been synthesized.