Dimethoate residues in Pakistan and mitigation strategies through microbial degradation: a review

Evaluation of Bacillus sp. strain isolated from pesticide influenced rhizospheric soil for dimethoate degrading potential

Pesticides play a major role in the current scenario of Indian agriculture. Agriculture is a backbone of the country's economy contributing to 54% of employment. Being a vastly populated country, food aid dependency rate is very high. To meet the requirements of such a huge supply, high crop yields are necessary to sustain the food security. Thus, an abundance use of pesticides is quite common, ranking among the top producers of pesticide in the world. Organophosphates (OPP) being one of the major pesticides used in India. Known for causing acute toxicity, organophosphate pesticides are needed to be used controllably, and residues released into the environment should be treated to render them harmless. Biological degradation is one of the most effective ways to achieve that. However, exploring potential candidate for the purpose is still not sufficient compared to the necessity to alleviate organophosphates from the environment. This study examines the microbial degradation of dimethoate, an organophosphate pesticide, using Bacillus paramycoides. These bacteria were isolated from the rhizospheric soil of sugarcane fields in Sevur, Tamil Nadu, India, which has been exposed to dimethoate for over 10 years. The strain has been extensively studied to check its prospect for environmental stress, pesticide tolerance, and degradation efficiency. Degradation of dimethoate was detected by Fourier transform infra-red spectroscopy (FTIR) analysis. The isolate was found to degrade dimethoate by 97.6% in 5 days with a tolerance of 1000ppm for the targeted pesticide. Emphasis have also been placed on detecting the secondary metabolites produced by the isolate using gas chromatography-Mass spectrometry(GC-MS) analysis, in which, a compound Phosphorothioic O, O,S-acid, a probable by-product of dimethoate degradation was identified. Significant other biologically important metabolites obtained from B.paramycoides, have also been reported in this study, which are known to have different anticancerous and antibacterial properties.

Bimetallic Ag2CrO4 nanoparticles with dual-enzyme-mimic activities in colorimetric sensor for sensitive and highly selective detection of dimethoate in vegetables

Colorimetric methods have the benefits of rapid detection and easy operation in dimethoate (DMT) analysis. However, the existing colorimetric sensor for DMT detection still face challenges in terms of performance stability and result reliability of sensing materials. Bimetallic Ag2CrO4 nanoparticles (NPs) have been found to have both oxidase-mimic and laccase-mimic catalytic activities. DMT has opposite effect on the above dual-enzyme-mimic activities, which can enhance oxidase-mimic activity while inhibiting laccase-mimic activity of Ag2CrO4 NPs. Therefore, a novel colorimetric sensor was constructed using the dual-enzyme-mimic activities as a sensing signal for rapidly detecting DMT in vegetables. The concentration of DMT is directly correlated with the absorbance change of the sensing solution, and the color change is further integrated with the smartphone to enable quantitative measurement of DMT. The limits of detection were as low as 8.7 μg L-1 in the oxidase-mimic channel and 10.9 μg L-1 in laccase-mimic channels. Besides, the colorimetric sensor has shown marked preference in selectivity over other competing pesticides, and obtained relatively preferable recovery rates in some vegetables, indicating that the established sensor has a wide range of potential applications in the area of vegetable pesticide detection.

Unraveling the complexity of organophosphorus pesticides: Ecological risks, biochemical pathways and the promise of machine learning

Organophosphorus pesticides (OPPs) are widely used in agriculture but pose significant ecological and human health risks due to their persistence and toxicity in the environment. While microbial degradation offers a promising solution, gaps remain in understanding the enzymatic mechanisms, degradation pathways, and ecological impacts of OPP transformation products. This review aims to bridge these gaps by integrating traditional microbial degradation research with emerging machine learning (ML) technologies. We hypothesize that ML can enhance OPP degradation studies by improving the efficiency of enzyme discovery, pathway prediction, and ecological risk assessment. Through a comprehensive analysis of microbial degradation mechanisms, environmental factors, and ML applications, we propose a novel framework that combines biochemical insights with data-driven approaches. Our review highlights the potential of ML to optimize microbial strain screening, predict degradation pathways, and identify key active sites, offering innovative strategies for sustainable pesticide management. By integrating traditional research with cutting-edge ML technologies, this work contributes to the journal's scope by promoting eco-friendly solutions for environmental protection and pesticide pollution control.

The design and preparation of PDI modified NH2-MIL-101(Fe) for high efficiency removal of dimethoate in peroxymonosulfate system: Performance, mechanism, pathway and toxicity assessment

The widespread use of organophosphorus pesticide dimethoate (DMT) in agriculture poses a threat to human health. In this work, the perylene tetracarboxylic diimide (PDI) modified NH2-MIL-101(Fe) (PDI/MIL) with strong covalent bond C(=O)-N were designed and prepared by a step solvothermal method. The synergistic effect between photocatalytic and peroxymonosulfate (PMS) activation for the DMT elimination over PDI/MIL was gained. Interestingly, PDI/MIL(1:10)/PMS showed boosting degradation efficiency (95.6%) for DMT under 18 min simulated sunlight irradiation. Its apparent reaction rate constant was 24.7 times higher than that of NH2-MIL-101(Fe)/PMS. Moreover, its reusability, stability and mineralization ability were evaluated, and a remarkable mineralization rate of 95.3% with 90 min was achieved. The enhanced activity were attributed to the formation of amide bond that exhibited superior charger transport ability and amount of produced active species. Combined the results obtained from the HPLC-MS and molecular structure characteristics of DMT analyzed by Fukui index, the degradation pathways were proposed. The toxicity of intermediates were predicted by Ecological Structure Activity Relationship (ECOSAR), Toxicity Estimation Software Tool (T.E.S.T.), and Vibrio fischeri experiments. Our work provided deep insights into the mechanisms of DMT degradation via photocatalysis-activated PMS over organic semiconductor modified metal organic frameworks.

Four Neurotoxic Insecticides Impair Partner and Host Finding in the Parasitoid Leptopilina heterotoma and Bioactive Doses Can Be Taken up Via the Host

In modern agriculture, control of insect pests is achieved by using insecticides that can also have lethal and sublethal effects on beneficial non-target organisms. Here, we investigate acute toxicity and sublethal effects of four insecticides on the males' sex pheromone response and the female host finding ability of the Drosophila parasitoid Leptopilina heterotoma. The nicotinic acetylcholine receptor antagonists acetamiprid, flupyradifurone and sulfoxaflor, as well as the acetylcholinesterase inhibitor dimethoate were applied topically as acetone solutions. Males treated with all four insecticides no longer preferred the female sex pheromone in a T-olfactometer. Duration of wing fanning, an element of the pheromone-mediated male courtship behavior, was also reduced by all four insecticides. The ability of females to orientate towards host-infested feeding substrate was not affected by acetamiprid in the tested dose range. However, treatment with dimethoate, flupyradifurone and sulfoxaflor resulted in the loss of the females' preference for host odor. At the lowest doses interfering with olfactory abilities of L. heterotoma in this study (acetamiprid: 0.21 ng, dimethoate: 0.105 ng, flupyradifurone: 2.1 ng and sulfoxaflor: 0.21 ng), ≥ 90% of the wasps survive insecticide treatment. Male pheromone responses and female host finding were also disturbed in those L. heterotoma that had developed in D. melanogaster larvae reared on dimethoate-treated feeding medium at sublethal levels. Hence, doses of this insecticide sufficient to interfere with chemical orientation of L. heterotoma can be taken up by the parasitoid via the food chain.

Functional profiling of the rhizospheric Exiguobacterium sp. for dimethoate degradation, PGPR activity, biofilm development, and ecotoxicological risk

This study introduces an indigenous bacterial strain, Exiguobacterium sp. (L.O), isolated from sugarcane fields in Sevur, Tamil Nadu, which has adapted to prolonged exposure to dimethoate. The strain demonstrated the capability to utilize 150 ppm of dimethoate as its sole carbon source, achieving a remarkable degradation rate of 95.87% within 5 days in mineral salt media. Gas chromatography-mass spectrometry (GC-MS) analyses identified the presence of intermediate by-products formed during degradation, like methyl diethanol amine and aspartyl glycine ethyl ester. Notably, phosphorothioic O, O, S-acid, an expected end product in the degradation of dimethoate, was also identified, further confirming the strain's effective metabolic breakdown of the pesticide. Further degradation study and analysis of changes in functional group was performed by FTIR, and a hypothetical degradation pathway was elucidated showing the course of dimethoate metabolism by the strain. Exiguobacterium sp. (L.O) also displayed significant plant growth-promoting traits, including the production of HCN, IAA, and ammonia and the formation of biofilms, which enhance its utility in agricultural applications. The ecotoxicity study revealed the degradation by-products exhibited reduced toxicity compared to the parent compound dimethoate, highlighting the strain's potential not only for bioremediation but also for supporting sustainable agricultural practices. This research presents a novel application of Exiguobacterium sp. (L.O), integrating the bioremediation of the organophosphate pesticide dimethoate with agricultural enhancement. This approach is critical for addressing the challenges associated with pesticide pollution in agricultural practices. This study is likely the first to demonstrate the application of this strain in the degradation of dimethoate, as suggested by an extensive review of the literature.

Microplastics derived from plastic mulch films and their carrier function effect on the environmental risk of pesticides

Plastic film mulching can maintain soil water and heat conditions, promote plant growth and thus generate considerable economic benefits in agriculture. However, as they age, these plastics degrade and form microplastics (MPs). Additionally, pesticides are widely utilized to control organisms that harm plants, and they can ultimately enter and remain in the environment after use. Pesticides can also be sorbed by MPs, and the sorption kinetics and isotherms explain the three stages of pesticide sorption: rapid sorption, slow sorption and sorption equilibrium. In this process, hydrophobic and partition interactions, electrostatic interactions and valence bond interactions are the main sorption mechanisms. Additionally, small MPs, biodegradable MPs and aged conventional MPs often exhibit stronger pesticide sorption capacity. As environmental conditions change, especially in simulated biological media, pesticides can desorb from MPs. The utilization of pesticides by environmental microorganisms is the main factor controlling the degradation rate of pesticides in the presence of MPs. Pesticide sorption by MPs and size effects of MPs on pesticides are related to the internal exposure level of biological pesticides and changes in pesticide toxicity in the presence of MPs. Most studies have suggested that MPs exacerbate the toxicological effects of pesticides on sentinel species. Hence, the environmental risks of pesticides are altered by MPs and the carrier function of MPs. Based on this, research on the affinity between MPs and various pesticides should be systematically conducted. During agricultural production, pesticides should be cautiously selected and used plastic film to ensure human health and ecological security.

Decision support model to assess pesticide safeness toward environment

For farmers around the world to protect crops from disturbing pests, it is common to use pesticides to ward off the growth of pests or even eliminate them. Even though pesticides are seen as a good thing for protecting crops, there is one thing that mustn't be forgotten the origin of the pesticide itself is a toxin compound that is dangerous if used irresponsibly. The main concern of this study is excessive use of pesticides may cause serious consequences to the ecosystem and environment through the accumulation of pesticide residue by irresponsible farmers. To minimize the effects of pesticide residues, the selection of the type of pesticide needs to be considered which type may not be harmful to the environment's health even though accumulation happens. Therefore, in this study, a fuzzy-based computational model assessor was built to measure the safety level of pesticides toward the environment. The fuzzy model was created with consideration of several parameters related to pesticide behaviors, its effects on beneficial organisms, and its persistence in the environment. The method used for this study includes literature reviewing, fuzzification, statistical approach, expert knowledge sharing, and quantitative analysis. The model created in this study can assist in a more accurate and realistic method of selecting better pesticide options that will be used by farmers. To ensure the validity of the model, verifying and validating the formula and pesticide result assessment were done with related literature articles. In this study, from 10 types of pesticides used as a sample, dodine, and iprodione pesticides are the best option for protecting crops with a safety level of 7.36, and abamectin, dimethoate, chorpyrifos, and methidathion are not safe options for farming use because of its potential of harming the environment.

Ecological risk assessment for typical organophosphorus pesticides in surface water of China based on a species sensitivity distribution model

The ecological risks posed by widespread organophosphorus pesticide (OPs) pollution in the surface waters of China remain unclear. In this study, species sensitivity distribution (SSD) parametric statistical approaches were coupled with fully acute and chronic toxicity data to fit the sensitivity distributions of different aquatic species to five typical OPs: dimethoate, malathion, parathion-methyl, trichlorfon, and dichlorvos. Crustaceans exhibit the highest sensitivity to OPs, whereas algae are the least sensitive. The acute hazardous concentrations that affected 5 % of the species (HC5) were 0.112, 0.001, 0.001, 0.001, and 0.001 mg/L for dimethoate, malathion, parathion-methyl, trichlorfon, and dichlorvos, respectively, whereas their chronic HC5 values were 0.004, 0.004, 0.053, 0.001, and 0.0005 mg/L, respectively. Hence, dichlorvos is highly toxic and poses greater risk to non-target aquatic species. The evaluation data revealed varying geographical distribution characteristics of the ecological risks from OPs in 15 freshwater aquatic systems across different regions of China. Dichlorvos posed the highest risk in the basins of Zhejiang and Guangdong Provinces, with the highest chronic Risk Quotient (RQ) and Hazard Index (HI) at 9.34 and 9.92, respectively. This is much higher than what was collected and evaluated for foreign rivers (the highest chronic RQ and HI in foreign rivers were 1.65 and 2.24, respectively). Thus, dichlorvos in the surface waters of China poses a substantial ecological risk to aquatic organisms, and may endanger human health.

Nonenantioselective environmental behavior of a chiral antiviral pesticide dufulin in aerobic soils

Dufulin is a promising chiral antiviral agent, but little is known about its fate in soils. In this study, the fate of dufulin enantiomers in aerobic soils was investigated using radioisotope tracing techniques. The result of the four-compartment model showed no significant differences in dissipation, generation of bound residues (BR) and mineralization between S-dufulin and R-dufulin during incubation. Dufulin dissipated most quickly in cinnamon soils, followed by fluvo-aquic and black soils and the half-lives of dufulin in these soils obtained by the modified model were 4.92-5.23, 32.39-33.32 and 60.80-61.34 d, respectively. After 120 d incubation, the percentage of radioactivity of BR increased to 18.2-38.4 % in the three soils. Dufulin formed most bound residues in the black soil, least in the cinnamon soil, and BRs rapidly formed in the cinnamon soil during the early culture period. In these three soils, the cumulative mineralization of ¹⁴CO₂ ranged from 25.0 to 26.7 %, 42.1 to 43.4 % and 33.8 to 34.4 %, respectively, which indicated that the environmental fate of dufulin was primarily influenced by soil characteristics. The study of microbial community structure revealed that the phyla Ascomycota, Proteobacteria and genus Mortierella might be related to the degradation of dufulin. These findings provide a reference for assessing the environmental impact and ecological safety of dufulin application.

Preparation of wavy three-dimensional graphene-like biochar and its adsorption mechanism of embedded separation for dimethoate

In this study, graphene-like biochar (IZBC) was prepared by pyrolysis of wheat straw in the presence of catalyst and activator. The formation of graphene in IZBC could be divided into three stages: shell core generation, carburization, and carbon precipitation. When the pyrolysis temperatures were in the ranges of 500-600 ℃, 600-700 ℃, 700-800 ℃ and 800-900 ℃, 17%, 32%, 13% and 38% of graphene were produced, respectively. The contribution ratios of graphene by FeCl₃, ZnCl₂ and HCl were 64%, 23% and 13%, respectively. Moreover, IZBC was filled with porous wavy three-dimensional graphene nanosheets that enabled self-aggregation to be effectively prevented, which was superior to the striped two-dimensional structure. The adsorption of IZBC for dimethoate was a spontaneous exothermic reaction with the adsorption capacity of 980 μmol/g, which was consistent with the pseudo-second-order and intraparticle diffusion models. The adsorption was inhibited by coexisting cations, anions, and humic acid in water. Dimethoate was adsorbed on graphene through embedded separation, with pore filling, cation-π and electrostatic attraction as the key driving forces. In addition, the adsorbed saturated IZBC could be effectively regenerated for many times by 2 mol/L HCl solution.

Algal mediated intervention for the retrieval of emerging pollutants from aqueous media

Water is a crucial elemental contributor for all sectors; however, the agricultural sector alone accounts for 70% of the world's total water withdrawal. The anthropogenic activity from various industries including agriculture, textiles, plastics, leather, and defence has resulted in the release of contaminants into water systems, resulting harm to the ecosystem and biotic community. Algae-based organic pollutant removal uses several methods, such as biosorption, bioaccumulation, biotransformation, and biodegradation. The adsorption of methylene blue by algal species Chlamydomonas sp. showed a maximum adsorption capacity of 2744.5 mg/g with 96.13% removal efficiency; on the other hand, Isochrysis galbana demonstrated a maximum of 707 µg/g nonylphenol accumulation in the cell with 77% removal efficiency indicating the potential of algal systems as efficient retrieval system for organic contaminants. This paper is a compilation of detailed information about biosorption, bioaccumulation, biotransformation, biodegradation, and their mechanism, along with the genetic alteration of algal biomass. Where the genetic engineering and mutations on algae can be advantageously utilized for the enhancement of removal efficiency without any secondary toxicity.

Safe purification of rural drinking water by biological aerated filter coupled with ultrafiltration

Water resources of many rural areas are usually lakes or reservoirs, which can be easily affected by run-off, non-point source pollution and are often of poorer quality compared with urban water sources. Drinking water supply in remote rural areas usually suffers from various challenges, such as the high cost of construction and maintenance of centralized drinking water treatment plants and pipe networks, due to the dispersed nature of villages, which are often located in varied and complex topographies. In this study, a combined process comprising biological aerated filter (BAF) combined with ultrafiltration was developed to treat polluted reservoir water. Organic matter indexes, turbidity, and chroma were used as indicators for the evaluation of the system performance. In a long-term experiment lasting 260 days, the combined process was tested under different values of critical operational parameters, including filler types and empty bed contact time (EBCT). Furthermore, the microbial communities in different BAF reactors were carefully evaluated at different times, finding that microorganisms with specific functions were enriched in the various BAF reactors. The combined process reached 85.5 % removal rate of DOC with an EBCT of 45 min and using granule active carbon (GAC) as filler. Most of the effluents of BAF reactors met the requirements for drinking water in China. The combined system showed practical potential for polluted water treatment in some rural areas.