Poly(N-isopropylacrylamide)-based thermo-responsive surfaces with controllable cell adhesion

Dopamine-assisted surface functionalization of saccharide-responsive fibers for the controlled harvesting and continuous fermentation of Saccharomyces cerevisiae

Continuous fermentation processes increasingly emphasized cell recycling, utilization, and renewal. In this study, to improve the sustainability of the immobilized Saccharomyces cerevisiae, the cells were recovered on the surface of the glucose-responsive supports through manipulating the competitive interactions of phenylboric acid groups between glycoproteins on the cells and glucose. Through a dopamine (DA)-assisted deposition approach, 3-acrylamidophenylboronic acid (APBA) was integrated to design the saccharide-sensitive cotton fibers (APBA@PDA-CF). The optimal co-deposition time (5 h) and ratio (1:1) resulted in an impressive immobilization efficiency of 69.64%. Meanwhile, 93.23% of Saccharomyces cerevisiae was captured and harvested on the surface of APBA@PDA-CF with the fermentation course through regulating the competitive interactions of phenylboric acid groups between glycoproteins on the cells and glucose regardless of pH. Notably, a strong interaction between the yeast cells and APBA@PDA-CF was observed at a low glucose concentration (0.1～2 g/L), with reduced sensitivity at high glucose concentrations (>5 g/L). Moreover, the ethanol production and yield could be increased to 25.37 g/L and 42.4% in the fifth-batch fermentation, respectively. Therefore, based on the feasible and versatile co-deposition method, this study not only broadened the application scope of APBA, but also explored the broad prospects of smart materials in cell immobilization, recovery and continuous fermentation.

Stem Cell's Secretome Delivery Systems

Stem cells' secretome contains biomolecules that are ready to give therapeutic activities. However, the biomolecules should not be administered directly because of their in vivo instability. They can be degraded by enzymes or seep into other tissues. There have been some advancements in localized and stabilized secretome delivery systems, which have increased their effectiveness. Fibrous, in situ, or viscoelastic hydrogel, sponge-scaffold, bead powder/ suspension, and bio-mimetic coating can maintain secretome retention in the target tissue and prolong the therapy by sustained release. Porosity, young's modulus, surface charge, interfacial interaction, particle size, adhesiveness, water absorption ability, in situ gel/film, and viscoelasticity of the preparation significantly affect the quality, quantity, and efficacy of the secretome. Therefore, the dosage forms, base materials, and characteristics of each system need to be examined to develop a more optimal secretome delivery system. This article discusses the clinical obstacles and potential solutions for secretome delivery, characterization of delivery systems, and devices used or potentially used in secretome delivery for therapeutic applications. This article concludes that secretome delivery for various organ therapies necessitates the use of different delivery systems and bases. Coating, muco-, and cell-adhesive systems are required for systemic delivery and to prevent metabolism. The lyophilized form is required for inhalational delivery, and the lipophilic system can deliver secretomes across the blood-brain barrier. Nano-sized encapsulation and surface-modified systems can deliver secretome to the liver and kidney. These dosage forms can be administered using devices such as a sprayer, eye drop, inhaler, syringe, and implant to improve their efficacy through dosing, direct delivery to target tissues, preserving stability and sterility, and reducing the immune response.

Antiviral Polymer Brushes by Visible-Light-Induced, Oxygen-Tolerant Covalent Surface Coating

This work presents a novel route for creating metal-free antiviral coatings based on polymer brushes synthesized by surface-initiated photoinduced electron transfer-reversible addition-fragmentation chain transfer (SI-PET-RAFT) polymerization, applying eosin Y as a photocatalyst, water as a solvent, and visible light as a driving force. The polymer brushes were synthesized using N-[3-(decyldimethyl)-aminopropyl] methacrylamide bromide and carboxybetaine methacrylamide monomers. The chemical composition, thickness, roughness, and wettability of the resulting polymer brush coatings were characterized by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), water contact angle measurements, and ellipsometry. The antiviral properties of coatings were investigated by exposure to severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and avian influenza viruses, with further measurement of residual viable viral particles. The best performance was obtained with Cu surfaces, with a ca. 20-fold reduction of SARS-Cov-2 and a 50-fold reduction in avian influenza. On the polymer brush-modified surfaces, the number of viable virus particles decreased by about 5-6 times faster for avian flu and about 2-3 times faster for SARS-CoV-2, all compared to unmodified silicon surfaces. Interestingly, no significant differences were obtained between quaternary ammonium brushes and zwitterionic brushes.

Bioinspired conductive structural color hydrogels as a robotic knuckle rehabilitation electrical skin

Electronic skins have attracted significant research interest in the biomedical engineering field including wearable devices, artificial prostheses, software robots, and so on. However, the integration of electronic skin for use in rehabilitation exercise remains unexplored. Here, we propose a novel, conductive structurally colored composite hydrogel for use as a robotic knuckle rehabilitation skin. It was found that the composite structure has an obvious color variation and electromechanical properties during the bending process. Therefore, this film could be used as a multi-signal response electronic skin to achieve real-time color sensing and electrical response, as well as for the human knuckle rehabilitation robot. These results indicated that the structurally colored composite hydrogels are valuable for use in many practical biomedical rehabilitation exercises where they are used as an electronic skin to give real-time color sensing and electrical response, and as well can be used in a human knuckle rehabilitation robot.

Multiparametric Material Functionality of Microtissue-Based In Vitro Models as Alternatives to Animal Testing

With the definition of the 3R principle by Russel and Burch in 1959, the search for an adequate substitute for animal testing has become one of the most important tasks and challenges of this time, not only from an ethical, but also from a scientific, economic, and legal point of view. Microtissue-based in vitro model systems offer a valuable approach to address this issue by accounting for the complexity of natural tissues in a simplified manner. To increase the functionality of these model systems and thus make their use as a substitute for animal testing more likely in the future, the fundamentals need to be continuously improved. Corresponding requirements exist in the development of multifunctional, hydrogel-based materials, whose properties are considered in this review under the aspects of processability, adaptivity, biocompatibility, and stability/degradability.

Photothermal scaffolds/surfaces for regulation of cell behaviors

Regulation of cell behaviors and even cell fates is of great significance in diverse biomedical applications such as cancer treatment, cell-based therapy, and tissue engineering. During the past decades, diverse methods have been developed to regulate cell behaviors such as applying external stimuli, delivering exogenous molecules into cell interior and changing the physicochemical properties of the substrates where cells adhere. Photothermal scaffolds/surfaces refer to a kind of materials embedded or coated with photothermal agents that can absorb light with proper wavelength (usually in near infrared region) and convert light energy to heat; the generated heat shows great potential for regulation of cell behaviors in different ways. In the current review, we summarize the recent research progress, especially over the past decade, of using photothermal scaffolds/surfaces to regulate cell behaviors, which could be further categorized into three types: (i) killing the tumor cells via hyperthermia or thermal ablation, (ii) engineering cells by intracellular delivery of exogenous molecules via photothermal poration of cell membranes, and (iii) releasing a single cell or an intact cell sheet via modulation of surface physicochemical properties in response to heat. In the end, challenges and perspectives in these areas are commented.

One-step harvest and delivery of micropatterned cell sheets mimicking the multi-cellular microenvironment of vascularized tissue

Techniques for harvest and delivery of cell sheets have been improving for decades. However, cell sheets with complicated patterns closely related to natural tissue architecture were hardly achieved. Here, we developed an efficient method to culture and harvest cell sheets with complex shape (noted as microtissues) using temperature-responsive hydrogel consisting of expandable polyethylene oxide polymer at low temperature. Firstly, a temperature-responsive hydrogel surface with honeycomb patterns (50 and 100 µm in width) were developed through microcontact printing of polydopamine (PD). The human dermal fibroblasts (HDFBs) and human umbilical vein endothelial cells (HUVECs) spontaneously formed honeycomb-shaped microtissues on the patterned hydrogel surface. The microtissues on the hydrogel were able to be harvested and directly delivered to the desired target through thermal expansion of the hydrogel at 4 °C with an efficiency close to 80% within 10 min which is faster than conventional method based on poly(N-isopropylacrylamide). The microtissues maintained their original honeycomb network and intact structures. Honeycomb-patterned cell sheets also were fabricated through serial seeding of various cell lines, including HDFBs, HUVECs, and human adipose-derived stem cells, in which cells were attached along the honeycomb pattern. The underlying honeycomb patterns in the cell sheets were successfully maintained for 3 days, even after delivery. In addition, patterned cell sheets were successfully delivered in vivo while maintaining an intact structure for 7 days. Together, our findings demonstrate that micropatterned temperature-responsive hydrogel is an efficient method of one-step culturing and delivery of complex microtissues and should prove useful in various tissue engineering applications. STATEMENT OF SIGNIFICANCE: Scaffold-free cell delivery techniques, including cell sheet engineering, have been developed for decades. However, there is limited research regarding culture and delivery of microtissues with complex architecture mimicking natural tissue. Herein, we developed a micro-patterned hydrogel platform for the culture and delivery of honeycomb-shaped microtissues. Honeycomb patterns were chemically engineered on the temperature-responsive hydrogel through microcontact printing of polydopamine to selectively allow for human dermal fibroblast or human umbilical vein endothelial cell adhesion. They spontaneously formed honeycomb-shaped microtissues within 24 hr upon cell seeding and directly delivered to various target area including in vivo via thermal expansion of the hydrogel at 4 °C, suggesting that the micro-patterned hydrogel can be an efficient tool for culture and delivery of complex microtissue.

Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications

Since the advent of additive manufacturing, known commonly as 3D printing, this technology has revolutionized the biofabrication landscape and driven numerous pivotal advancements in tissue engineering and regenerative medicine. Many 3D printing methods were developed in short course after Charles Hull first introduced the power of stereolithography to the world. However, materials development was not met with the same enthusiasm and remained the bottleneck in the field for some time. Only in the past decade has there been deliberate development to expand the materials toolbox for 3D printing applications to meet the true potential of 3D printing technologies. Herein, we review the development of biomaterials suited for light-based 3D printing modalities with an emphasis on bioprinting applications. We discuss the chemical mechanisms that govern photopolymerization and highlight the application of natural, synthetic, and composite biomaterials as 3D printed hydrogels. Because the quality of a 3D printed construct is highly dependent on both the material properties and processing technique, we included a final section on the theoretical and practical aspects behind light-based 3D printing as well as ways to employ that knowledge to troubleshoot and standardize the optimization of printing parameters.

Bio-inspired lubricant drug delivery particles for the treatment of osteoarthritis

Osteoarthritis is a chronic and irreversible degenerative disease that often occurs in middle-aged and elderly people. Although many clinical therapeutics like intra-articular drug injection have been widely used for treating osteoarthritis, there are still some shortcomings that need to be overcome such as frequent injection, inflammatory response, and potential overdose. Inspired by the natural biocompatible lubricant substances, hyaluronic acid (HA), a novel bio-inspired lubricant drug delivery microcarrier with pathological-state responsive switches, was developed for osteoarthritis treatment. In this system, a temperature-responsive hydrogel was used to form an inverse opal-structured microsphere scaffold to increase the drug loading efficiency, while HA was employed as a vehicle to encapsulate drugs. Due to the properties of the scaffold, the loaded lubricant and encapsulated drugs can be released when temperature rises in the joint cavity during exercise or osteoarthritis. In contrast, the delivery system will be locked and the drug release process will stop when the arthritis lessens or exercise is stopped. Thus, the designed microcarrier is endowed with the ability of intelligently releasing drugs and lubricants for curing osteoarthritis, demonstrating its great potential in biomedical applications.

Antibacterial and angiogenic chitosan microneedle array patch for promoting wound healing

A patch with the capability of avoiding wound infection and promoting tissue remolding is of great value for wound healing. In this paper, we develop a biomass chitosan microneedle array (CSMNA) patch integrated with smart responsive drug delivery for promoting wound healing. Chitosan possesses many outstanding features such as the natural antibacterial property and has been widely utilized for wound healing. Besides, the microstructure of microneedles enables the effective delivery of loaded drugs into the target area and avoids the excessive adhesion between the skin and the patch. Also, vascular endothelial growth factor (VEGF) is encapsulated in the micropores of CSMNA by temperature sensitive hydrogel. Therefore, the smart release of the drugs can be controllably realized via the temperature rising induced by the inflammation response at the site of wounds. It is demonstrated that the biomass CSMNA patch can promote inflammatory inhibition, collagen deposition, angiogenesis, and tissue regeneration during the wound closure. Thus, this versatile CSMNA patch is potentially valuable for wound healing in clinical applications.

Thermoresponsive polymers and their biomedical application in tissue engineering - a review

Thermoresponsive polymers hold great potential in the biomedical field, since they enable the fabrication of cell sheets, in situ drug delivery and 3D-printing under physiological conditions. In this review we provide an overview of several thermoresponsive polymers and their application, with focus on poly(N-isopropylacrylamide)-surfaces for cell sheet engineering. Basic knowledge of important processes like protein adsorption on surfaces and cell adhesion is provided. For different thermoresponsive polymers, namely PNIPAm, Pluronics, elastin-like polypeptides (ELP) and poly(N-vinylcaprolactam) (PNVCL), synthesis and basic chemical and physical properties have been described and the mechanism of their thermoresponsive behavior highlighted. Fabrication methods of thermoresponsive surfaces have been discussed, focusing on PNIPAm, and describing several methods in detail. The latter part of this review is dedicated to the application of the thermoresponsive polymers and with regard to cell sheet engineering, the process of temperature-dependent cell sheet detachment is explained. We provide insight into several applications of PNIPAm surfaces in cell sheet engineering. For Pluronics, ELP and PNVCL we show their application in the field of drug delivery and tissue engineering. We conclude, that research of thermoresponsive polymers has made big progress in recent years, especially for PNIPAm since the 1990s. However, manifold research possibilities, e.g. in surface fabrication and 3D-printing and further translational applications are conceivable in near future.

Polypropylene mesh for hernia repair with controllable cell adhesion/de-adhesion properties

Herein, a versatile bilayer system, composed by a polypropylene (PP) mesh and a covalently bonded poly(N-isopropylacrylamide) (PNIPAAm) hydrogel, is reported. The cell adhesion mechanism was successfully modulated by controlling the architecture of the hydrogel in terms of duration of PNIPAAm grafting time, crosslinker content, and temperature of material exposure in PBS solutions (below and above the LCST of PNIPAAm). The best in vitro results with fibroblast (COS-1) and epithelial (MCF-7) cells was obtained with a mesh modified with a porous iPP-g-PNIPAAm bilayer system, prepared via PNIPAAm grafting for 2 h at the lowest N,N'-methylene bis(acrylamide) (MBA) concentration (1 mM). Under these conditions, the detachment of the fibroblast-like cells was 50% lower than that of the control, after 7 days of cell incubation, which represents a high de-adhesion of cells in a short period. Moreover, the whole system showed excellent stability in dry or wet media, proving that the thermosensitive hydrogel was well adhered to the polymer surface, after PP fibre activation by cold plasma. This study provides new insights on the development of anti-adherent meshes for abdominal hernia repair.

Engineering an adhesive based on photosensitive polymer hydrogels and silver nanoparticles for wound healing

Adhesives developed possess a good hemostatic effect. Attractively, agents loaded into the adhesives could exert sustained excellent antibacterial properties.

Advanced drug delivery systems and artificial skin grafts for skin wound healing

Cutaneous injuries, especially chronic wounds, burns, and skin wound infection, require painstakingly long-term treatment with an immense financial burden to healthcare systems worldwide. However, clinical management of chronic wounds remains unsatisfactory in many cases. Various strategies including growth factor and gene delivery as well as cell therapy have been used to enhance the healing of non-healing wounds. Drug delivery systems across the nano, micro, and macroscales can extend half-life, improve bioavailability, optimize pharmacokinetics, and decrease dosing frequency of drugs and genes. Replacement of the damaged skin tissue with substitutes comprising cell-laden scaffold can also restore the barrier and regulatory functions of skin at the wound site. This review covers comprehensively the advanced treatment strategies to improve the quality of wound healing.

In-Channel Responsive Surface Wettability for Reversible and Multiform Emulsion Droplet Preparation and Applications

We report on a simple approach for in-channel functionalization of a polydimethylsiloxane (PDMS) surface to obtain a switchable and reversible wettability change between hydrophilic and hydrophobic states. The thermally responsive polymer, poly( N-Isopropylacrylamide) (PNIPAAm), was grafted on the surface of PDMS channels by UV-induced surface grafting. PNIPAAm-grafted PDMS (PNIPAAm-g-PDMS) surface wettability can be thermally tuned to obtain water contact angles varying in the range of 24.3 to 106.1° by varying temperature at 25-38 °C. By selectively modifying the functionalized area in the microfluidic channels, multiform emulsion droplets of oil-in-water (O/W), water-in-oil (W/O), oil-in-water-in-oil (O/W/O), and water-in-oil-in-water (W/O/W) could be created on-demand. Combining solid surface wettability and liquid-liquid interfacial properties, tunable generation of O/W and W/O droplet and stratified flows were enabled in the same microfluidic device with either different or the same two-phase fluidic systems, by properly heating/cooling thermal-responsive microfluidic channels and choosing suitable surfactants. Controllable creation of O/W/O and W/O/W droplets was also achieved in the same microfluidic device, by locally heating or cooling the droplet generation areas with integrated electric heaters to achieve opposite surface wettability. Hollow microcapsules were prepared using double emulsion droplets as templates in the microfluidic device with sequential hydrophobic and hydrophilic channel segments, demonstrating the strength of the proposed approach in practical applications.

The Pathway to Intelligence: Using Stimuli-Responsive Materials as Building Blocks for Constructing Smart and Functional Systems

Systems that are intelligent have the ability to sense their surroundings, analyze, and respond accordingly. In nature, many biological systems are considered intelligent (e.g., humans, animals, and cells). For man-made systems, artificial intelligence is achieved by massively sophisticated electronic machines (e.g., computers and robots operated by advanced algorithms). On the other hand, freestanding materials (i.e., not tethered to a power supply) are usually passive and static. Hence, herein, the question is asked: can materials be fabricated so that they are intelligent? One promising approach is to use stimuli-responsive materials; these "smart" materials use the energy supplied by a stimulus available from the surrounding for performing a corresponding action. After decades of research, many interesting stimuli-responsive materials that can sense and perform smart functions have been developed. Classes of functions discussed include practical functions (e.g., targeting and motion), regulatory functions (e.g., self-regulation and amplification), and analytical processing functions (e.g., memory and computing). The pathway toward creating truly intelligent materials can involve incorporating a combination of these different types of functions into a single integrated system by using stimuli-responsive materials as the basic building blocks.

A responsive porous hydrogel particle-based delivery system for oncotherapy

Liver cancer is one of the malignant cancers that seriously threatens human health. Although some common treatments including chemotherapy have been applied in oncotherapy, there are often serious shortcomings such as frequent and uncontrollable drug infusion. To overcome these limitations, here, we introduced responsive porous hydrogel microparticles loaded with 5-fluorouracil and metformin for oncotherapy. Because of the interconnected porous structures, various forms of active molecules could be loaded into the particles. In addition, the relatively higher temperature of the tumor site and the temperature-responsive shape transition of pNIPAM hydrogel enabled controllable drug release. The porous pNIPAM particles not only exhibited large loading efficiency and sustained release for the 5-fluorouracil and metformin co-delivery, but also protected drugs from being resolved. Thus, it can be anticipated that the porous microparticles will have great potential in oncotherapy.

Nanostructured Thermoresponsive Surfaces Engineered via Stable Immobilization of Smart Nanogels with Assistance of Polydopamine

Thermoresponsive surfaces featured with nanostructures have found wide potential applications in biological and chemical fields. Herein, we report nanostructured thermoresponsive surfaces engineered via stable immobilization of thermoresponsive nanogels with the assistance of polydopamine. The results show that the thin layer of polydopamine on the poly( N-isopropylacrylamide) (PNIPAM) nanogels nearly does not affect the thermoresponsive property of the nanogels. The stability of the thermoresponsive nanogels on the substrate surfaces immobilized under different pH conditions of dopamine solutions are quatitively studied by fluid shearing experiments inside capillaries, and the characterization results show that the strong interaction forces between the polydopamine layer on the substrate surfaces and the thermoresponsive nanogels are heavily dependent on the oxidation state of the dopamine molecules. With the proposed strategy, thermoresponsive nanostructured surfaces immobilized with PNIPAM nanogels on two-dimensional and three-dimensional substrate surfaces are generated to achieve smart cell culture plates and smart gating membranes, respectively, which demonstrate versatile applications of the nanostructured thermoresponsive surfaces.

Multifunctional Chitosan Inverse Opal Particles for Wound Healing

Wound healing is one of the most important and basic issues faced by the medical community. In this paper, we present biomass-composited inverse opal particles with a series of advanced features for drug delivery and wound healing. The particles were derived by using chitosan biomass to negatively replicate spherical colloid crystal templates. Because of the interconnected porous structures, various forms of active drugs, including fibroblast growth factor could be loaded into the void spaces of the inverse opal particles and encapsulated by temperature-responsive hydrogel. This endowed the composited particles with the capability of intelligent drug release through the relatively high temperature caused by the inflammation reaction at wound sites. Because the structural colors and characteristic reflection peaks of the composited inverse opal particles are blue-shifted during the release process, the drug delivery can be monitored in real time. It was demonstrated that the biomass-composited microcarriers were able to promote angiogenesis, collagen deposition, and granulation-tissue formation as well as reduce inflammation and thus significantly contributed to wound healing. These features point to the potential value of multifunctional biomass inverse opal particles in biomedicine.

Bioinspired thermoresponsive nanoscaled coatings: Tailor-made polymer brushes with bioconjugated arginine-glycine-aspartic acid-peptides

The development of bioengineered surface coatings with stimuli-responsive properties is beneficial for a number of biomedical applications. Environmentally responsive and switchable polymer brush systems have a great potential to create such smart biointerfaces. This study focuses on the bioconjugation of cell-instructive peptides, containing the arginine-glycine-aspartic acid tripeptide sequence (RGD motif), onto well-defined polymer brush films. Herein, the highly tailored end-grafted homo polymer brushes are either composed of the polyelectrolyte poly(acrylic) acid (PAA), providing the reactive carboxyl functionalities, or of the temperature-responsive poly(N-isopropylacrylamide) (PNIPAAm). Of particular interest is the preparation of grafted-to binary brushes using both polymers and their subsequent conversion to RGD-biofunctionalized PNIPAAm-PAA binary brushes by a carbodiimide conjugation method. The bioconjugation process of two linear RGD-peptides Gly-Arg-Gly-Asp-Ser and Gly-Arg-Gly-Asp-Ser-Pro-Lys and one cyclic RGD-peptide cyclo(Arg-Gly-Asp-D-Tyr-Lys) is comparatively investigated by complementary analysis methods. Both techniques, in situ attenuated total reflectance Fourier transform infrared spectroscopy measurements and the in situ spectroscopic ellipsometric analysis, describe changes of the brush surface properties due to biofunctionalization. Besides, the bound RGD-peptide amount is quantitatively evaluated by ellipsometry in comparison to high performance liquid chromatography analysis data. Additionally, molecular dynamic simulations of the RGD-peptides themselves allow a better understanding of the bioconjugation process depending on the peptide properties. The significant influence on the bioconjugation result can be derived, on the one hand, of the polymer brush composition, especially from the PNIPAAm content, and, on the other hand, of the peptide dimension and its reactivity.

Series of In Situ Photoinduced Polymer Graftings for Sensitive Detection of Protein Biomarkers via Cascade Amplification of Liquid Crystal Signals

Developing of new polymeric materials for the sensitive and rapid detection of trace protein biomarkers has attracted increasing attention in biomedical fields. Herein, series of in situ photoinduced polymer graftings were developed for sensitive detection of protein biomarkers by using featured cascade amplification of liquid crystal (LC) signals. The limit-of-detection (LOD) for native bovine serum albumin (BSA) molecules is around 10 μg/mL in a LC biosensor before signal amplification. Upon the cascade amplification using surface-grafted polymers, poly[poly(ethylene glycol) methacrylate] grafting ( s-P(PEGMA)) exhibits superior amplification ability (10⁴-fold lower than native BSA) than the other two graftings of poly(2-hydroxyethyl methacrylate) ( s-PHEMA) and poly(methacrylic acid) ( s-PMAA; 10²-fold lower than native BSA). The contact angles of water and LC on the s-P(PEGMA) grafting show significant difference in comparison with s-PHEMA and s-PMAA graftings ( p < 0.05), implying interfacial energies of the grafted polymers may dictate the orientational transition of LCs. The clinical urine samples collected from the patients with proteinuria were also used to confirm the feasibility of the polymer-amplified LC sensors for practical protein assays. The present work reveals that in situ photoinduced polymer grafting is one promising method to amplify the signals of LC biosensors for the rapid and sensitive detection of trace protein biomarkers.

External-Field-Induced Gradient Wetting for Controllable Liquid Transport: From Movement on the Surface to Penetration into the Surface

External-field-responsive liquid transport has received extensive research interest owing to its important applications in microfluidic devices, biological medical, liquid printing, separation, and so forth. To realize different levels of liquid transport on surfaces, the balance of the dynamic competing processes of gradient wetting and dewetting should be controlled to achieve good directionality, confined range, and selectivity of liquid wetting. Here, the recent progress in external-field-induced gradient wetting is summarized for controllable liquid transport from movement on the surface to penetration into the surface, particularly for liquid motion on, patterned wetting into, and permeation through films on superwetting surfaces with external field cooperation (e.g., light, electric fields, magnetic fields, temperature, pH, gas, solvent, and their combinations). The selected topics of external-field-induced liquid transport on the different levels of surfaces include directional liquid motion on the surface based on the wettability gradient under an external field, partial entry of a liquid into the surface to achieve patterned surface wettability for printing, and liquid-selective permeation of the film for separation. The future prospects of external-field-responsive liquid transport are also discussed.

Poly(N-isopropylacrylamide) and Copolymers: A Review on Recent Progresses in Biomedical Applications

The innate ability of poly(N-isopropylacrylamide) (PNIPAAm) thermo-responsive hydrogel to copolymerize and to graft synthetic polymers and biomolecules, in conjunction with the highly controlled methods of radical polymerization which are now available, have expedited the widespread number of papers published in the last decade-especially in the biomedical field. Therefore, PNIPAAm-based hydrogels are extensively investigated for applications on the controlled delivery of active molecules, in self-healing materials, tissue engineering, regenerative medicine, or in the smart encapsulation of cells. The most promising polymers for biodegradability enhancement of PNIPAAm hydrogels are probably poly(ethylene glycol) (PEG) and/or poly(ε-caprolactone) (PCL), whereas the biocompatibility is mostly achieved with biopolymers. Ultimately, advances in three-dimensional bioprinting technology would contribute to the design of new devices and medical tools with thermal stimuli response needs, fabricated with PNIPAAm hydrogels.

Bioresponsive interfaces composed of calmodulin and poly(ethylene glycol): Toggling the interfacial film thickness by protein-ligand binding

Responsive interfaces are often realized by polymer films that change their structure and properties upon changing the pH-value, ionic strength or temperature. Here, we present a bioresponsive interfacial structure that is based on a protein, calmodulin (CaM), which undergoes a huge conformational change upon ligand binding. At first, we characterize the conformational functionality of a double Cys mutant of CaM by small-angle X-ray scattering (SAXS) and Fourier transform infrared (FTIR) spectroscopy. The CaM mutant is then used to cross-link poly(ethylene glycol) (PEG) chains, which are bound covalently to a supporting planar Si surface. These films are characterized by X-ray reflectometry (XR) in a humidity chamber providing full hydration. It is well known that Ca²⁺-saturated holo-CaM binds trifluoperazine (TFP) and changes its conformation from an open, dumbbell-shaped to a closed, globular one in solution. At the interface, we observe an increase of the PEG-CaM film thickness, when TFP is binding and inducing the closed conformation, whereas the removal of Ca²⁺-ions and a concomitant release of TFP is associated with a decrease of the film thickness. This toggling of the film thickness is largely reversible. In this way, a structural change of the interface is achieved via protein functionality which has the advantage of being selective for ligand molecules without changing the environmental conditions in a harsh way via physico-chemical parameters.

A Multiscale TiO2 Nanorod Array for Ultrasensitive Capture of Circulating Tumor Cells

In this work, a uniform multiscale TiO2 nanorod array is fabricated to provide a "multi-scale interacting platform" for cell capture, which exhibits excellent capture specificity and sensitivity of the target cells after modification with bovine serum albumin (BSA) and DNA aptamer. After studying the capture performance of the BSA-aptamer TiO2 nanorod substrates and other nanostructured substrates, we can conclude that the multisacle TiO2 nanorod substrates could indeed effectively enhance the capture yields of target cancer cells. The capture yield of artificial blood samples on the BSA-aptamer TiO2 nanorod substrates is up to 85%-95%, revealing the potential application of the TiO2 nanorods on efficient and sensitive capture of rare circulating tumor cells.

Synthesis of a self-healable and pH responsive hydrogel based on an ionic polymer/clay nanocomposite

This investigation reports the preparation of a pH responsive self-healing nanocomposite hydrogel based on ionic polymer and organically modified montmorillonite (OMMT) clay.