Comparative study on the methods for predicting the reactive site of nucleophilic reaction

Degradation of thiamphenicol by La-Fe2O3/DBD/HCP synergistic catalytic system

In this study, a highly efficient La-Fe2O3/dielectric barrier discharge (DBD)/honeycomb ceramic plate synergistic catalytic system was successfully constructed by using modified iron oxide (Fe2O3) catalyst coating assisted DBD plasma, and the prepared catalytic coating was fully characterized by various techniques. The results indicate that the lanthanum (La) is efficiently and uniformly doped in Fe2O3, and the modified La-Fe2O3 catalyst exhibited a better photocatalytic performance. The overuse of Thiamphenicol (TAP), as a typical chloramphenicol antibiotic, has led to its accumulation in the aquatic environment. Accordingly, TAP was selected as the target contaminant to evaluate the catalytic activity of the synergistic system. The results confirmed that the catalytic ability of the synergistic catalytic system was significantly improved, and the data showed that the degradation rate of the synergistic system reached 99.1% under the same conditions compared with 68.2% for the single DBD plasma, which effectively improved low energy efficiency limitations of the single DBD technology. Through quantitative measurements of the concentrations of dissolved ozone (O3) and hydrogen peroxide (H2O2) in the system and radical trapping experiments, combined with emission spectroscopy, the mechanism of synergistic system degradation of TAP was analyzed. The intermediates in the degradation process were characterized by high-resolution mass spectrometry, and the degradation pathway of TAP was proposed based on the analysis of the intermediates and their combination with theoretical calculations. This study presents a theoretical basis for the improvement of DBD technology and a technical guide for the removal process of antibiotics from industrial wastewater.

Deciphering the Reaction Cycle Mechanisms and Key Reaction Factors of Monochlorosilane by Disproportionation of Dichlorosilane via Experiments and Density Functional Theory

Monochlorosilane (MCS) is an important silicon-based precursor for the fabrication of semiconductors and integrated circuits. The MCS production partly depends on the catalytic disproportionation of dichlorosilane (DCS). The DCS disproportionation has been critical yet challenging due to the involvement of multiple reversible reactions and other byproducts, often resulting in suboptimal yields of MCS. This investigation explored the sensitive conditions and key controlling factors affecting MCS yield in DCS disproportionation using gas chromatography-mass spectrometry (GC-MS). With increasing feed rates, the temperature requirement for DCS disproportionation gradually increased, and the sensitivity became significantly enhanced at high pressures. The optimal reaction conditions were 0.2 kg/h, 323.15 K, and 0.3 MPa. More importantly, density functional theory (DFT) calculations revealed the complete reaction cycle pathways of MCS generation. In these pathways, DCS dehydrogenation was identified as the rate-determining step, exhibiting the antagonistic effect with MCS disproportionation. The SiHCl3-SiH2Cl- species, acting as the key intermediate, decomposed after promoting chlorine transfer to produce MCS and trichlorosilane (TCS). Furthermore, chloride ions, as byproducts, not only removed reactants but also acted as the chlorine source. This study provides significant theoretical guidance for the precise control of chlorosilane disproportionation reactions and the design of related catalysts.

Enantioselective Immobilization of Nonprecious Metal Complexes on Chiral Covalent Organic Frameworks for Improved Single-Site Photocatalytic Hydrogen Evolution

The noncovalent assembly of molecular catalysts into photocatalytic systems represents a pivotal strategy for exploring single-site heterogenous catalysts, excluding the need for elaborate functionalization design. However, the reliance on weak noncovalent interactions (e.g., van der Waals forces) often leads to inefficient outer-sphere electron transfer and inferior structural stability. Herein, we report the enantioselective immobilization of cobalt-based molecular catalysts with chiral tetradentate ligands onto the surface of a β-ketoenamine-linked chiral covalent organic framework (COF) synthesized through chirality induction. The enantiomeric assembly enables axial coordination between the molecular catalysts and the chiral COF, accompanied by enamine-to-imine tautomerization. Leveraging efficient inner-sphere electron transfer, the resulting composite exhibits a significantly enhanced H2 evolution rate (5.70 mmol g-1 h-1) and sustained performance without the use of precious metals. The enantiomeric assembly strategy on a COF platform demonstrates a viable approach to improve both the stability and activity of molecular catalysts, thereby expanding the design paradigm of single-site photocatalysts.

Evans-Polanyi-like Formulations for Rapidly Predicting Key Depolymerization Barriers in Xylopyranoses: Toward the Faster Development of Kinetic Models for Hemicellulose Pyrolysis

This work elucidates Evans-Polanyi-like (EPL) relations to rapidly estimate the standard activation enthalpy of three ubiquitous reaction classes playing a central role in hemicellulose pyrolysis: ring-opening, ring contraction, and elimination. These models bypass computing the reaction enthalpy by leveraging computationally cheap local and global electron-density-based chemical reactivity descriptors, such as Fukui's functions (f), electron population of C-O bonds (N), and the gross intrinsic strength bond index (Δgpair), evaluated for reactants solely. More than 270 reactions observed in twenty-eight functionalized β-d-xylopyranoses, the hemicellulose building block, are used under the 20-80% partition scheme for validating-deriving purposes. By using multilinear regression analysis, four EPL equations are proposed for informing barriers at the M06-2X/6-311++G(d,p), CBS-QB3, G4, and DLPNO-CCSD(T)-F12/cc-pVTZ-F12//M06-2X/6-311++G(d,p) levels. An adjusted coefficient of determination of 0.80 characterizes these parametric polynomials. Moreover, MAE and RMSE of ≈3.3 and ≈4.1 kcal mol-1 describe the performance of the best-fitting models at DFT and G4. Conversely, the highest values, MAE = 3.6 and RMSE = 4.7 kcal mol-1, are associated with the CBS-QB3 level. The benchmarking of the computed activation enthalpies at 298 K yields simple functions for high-level estimations from low levels of theory with R2 ranging from 0.94 to 0.98. Extrapolating the DPLNO barriers to the complete basis set limit tends to lower them by 0.63 kcal mol-1. EPL expressions are tailored to facilitate the development of chemical kinetic models for hemicellulose pyrolysis, as the reactant structure is the only input required.

Eco-friendly bleaching of knitted cotton fabrics via acetylated starch as a bleach activator for H2O2

Bleach activators for H2O2 can notably lower bleaching temperature, leading to energy savings in cotton bleaching. However, biodegradable and nontoxic bleach activators are required to further achieve eco-friendly bleaching. Acetylated starch (AS), a saccharide derivative, has emerged as a promising candidate and not yet been explored as a bleach activator for cotton bleaching process. Herein, AS was prepared, characterized and utilized as an ecofriendly bleach activator for H2O2 in bleaching knitted cotton fabric. First, to further improve the aqueous dispersivity of the initial AS samples, AS nanospheres were fabricated via a nanoprecipitation procedure. The bleaching performance in terms of CIE whiteness index (WI) and H2O2 decomposition rate increased significantly at 70 °C with addition of AS. Degree of substitution (DS), AS dosage, NaOH concentration and bleaching temperature were also systematically investigated. Bleaching mechanism of the H2O2/AS system was further confirmed and proposed by using chemical computational analysis, peracetic acid determination and fluorescence detection experiments, respectively. Therefore, this H2O2/AS system can be a model system to gain a general understanding of saccharide derivative-based bleach activators. This work would greatly expand the range of bleach activators for cotton bleaching.

Computational tools for the prediction of site- and regioselectivity of organic reactions

The regio- and site-selectivity of organic reactions is one of the most important aspects when it comes to synthesis planning. Due to that, massive research efforts were invested into computational models for regio- and site-selectivity prediction, and the introduction of machine learning to the chemical sciences within the past decade has added a whole new dimension to these endeavors. This review article walks through the currently available predictive tools for regio- and site-selectivity with a particular focus on machine learning models while being organized along the individual reaction classes of organic chemistry. Respective featurization techniques and model architectures are described and compared to each other; applications of the tools to critical real-world examples are highlighted. This paper aims to serve as an overview of the field's status quo for both the intended users of the tools, that is synthetic chemists, as well as for developers to find potential new research avenues.

In vitro metabolism of seven arolyl-derived fentanyl-type new psychoactive substances

Over the past decade, fentanyl-type new psychoactive substances (F-NPS) have emerged as the most representative synthetic opioids in third-generation drugs. These substances are characterized by their "low" fatal dose and parent drug levels in biological matrices, "fast" rates of derivatization and metabolism, and "many" derivatization sites and analogs. The low levels of parent fentanyl NPS in biological matrices complicate their detection, necessitating the use of characteristic metabolites as biomarkers for forensic analysis. Moreover, the ongoing emergence of arolyl-derived F-NPS further challenges forensic laboratories in accurately identifying the parent drug from its metabolites. To address this issue, in this study, the in vitro phase I metabolism of seven arolyl-derived F-NPS was studied using a human liver microsome model. Metabolites were analyzed by liquid chromatography-ion trap tandem time-of-flight mass spectrometry. Using density functional theory, the structural characteristics and their effects on amide hydrolysis, N-dealkylation, and oxidation metabolism were clarified. Amide hydrolysis was influenced by the positive charge of the carbonyl carbon and the 2-substituent effect on the aryl groups. N-dealkylation, β-monohydroxylation, N-oxidation, and phenyl group monohydroxylation in the tail were less affected by structural changes in the head. The former two were the major metabolites and exhibited competition. The relative contents of N-oxidation and phenyl group monohydroxylation in the tail were relatively stable at 4% and 13%, respectively. Furthermore, the β-C adjacent to the nitrogen on the piperidine ring was susceptible to oxidation, leading to the formation of the monohydroxylation metabolite. The results of this study may enhance our understanding of the in vitro metabolism of arolyl-derived F-NPS, and potentially all F-NPS, providing important data and theoretical support for predicting their in vivo metabolism in the future.

In situ albumin tagging for targeted imaging of endothelial barrier disruption

The endothelial barrier (EB) is a critical component of the body's homeostatic mechanisms, thus developing effective imaging techniques to visualize its integrity is essential. The EB disruption is accompanied by the alternations in permeability and even the breakdown of tight junctions (TJs), leading to the leakage of albumin; thus, albumin can serve as a biomarker for EB disruption. Herein, we develop an albumin-specific, covalently tagged near-infrared II (NIR-II) dye, with its high selectivity for endogenous albumin, for targeted imaging EB disruption. Our albumin-tagging dye serves as a chromophore to construct NIR-II fluorescent proteins in situ, with substantially improved brightness. Thus, through in situ dye tagging of endogenous albumin as the efficient "targeting agent," we can precisely image disruptions in various endothelial barriers. Unlike the traditional exogenous targeting agents (e.g., dye-labeled antibodies) with enzymatic degradation or immune system capture issues, in situ albumin tagging demonstrates superhigh performance for targeted imaging.

Density Functional Theory Study on Reconstruction and Reversible Transformation Processes of the ZZ57 Edge Structure in Carbon Materials: Effect of Na, K, and Ca

The edge structures of carbonaceous materials exhibit temperature-dependent behavior on the atomic scale, with variations in the relative ratios of zigzag, reconstructed 5-7 zigzag (ZZ57), and armchair edges observed at different temperatures. Nevertheless, the mechanisms underlying the interconversion of these edge structures and the influence of the surrounding metals remain unclear. This study investigates the reconstruction and reversible transformation processes of ZZ57 edge structures in carbon materials and examines the effects of different metal atoms (Na, K, and Ca) by using density functional theory. The simplified Z57 and A57 models are selected to simulate the microscopic reaction pathways at the isolated system level. Wave function analysis is conducted to determine the physical and chemical characteristics of ZZ57 edge structures and to predict the optimal adsorption positions of the metal atoms. Results indicate that the ZZ57 edge structure reconstruction and reversible transformation are exothermic reactions that proceed favorably in the forward direction. Analysis of the ten-membered ring in the transition state structure shows that the average bond order of the C-C bond is lower than that in the benzene ring system. Thermodynamic analysis shows that Na, K, and Ca atoms reduce the chemical equilibrium constant, thereby hindering the progress of the reactions. These findings not only provide specific theoretical insights into the transformation of the ZZ57 edge structure but also offer guidance for the precise design of carbon edges and the development of practical carbon materials.

Study of chemical reactivity and molecular interactions of the hydrochlorothiazide-4-aminobenzoic acid cocrystal using spectroscopic and quantum chemical approaches

In this study, the molecular, electronic, and chemical properties of the drug hydrochlorothiazide (HCTZ) are determined after cocrystallization with 4-aminobenzoic acid (4-ABA). Analysis has been performed to understand how those variations lead to alteration of physical properties and chemical reactivity in the cocrystal HCTZ-4ABA. IR and Raman characterizations were performed along with quantum chemical calculations. A theoretical investigation of hydrogen bonding interactions in HCTZ-4ABA has been conducted using two functionals: B3LYP and wB97X-D. The results obtained by B3LYP and wB97X-D are compared which leads to the conclusion that B3LYP is the best applied function (density functional theory) to obtain suitable results for spectroscopy. The chemical reactivity descriptors are used to understand various aspects of pharmaceutical properties. Natural bond orbital (NBO) analysis and quantum theory of atoms (QTAIM) are used to analyze nature and strength of hydrogen bonding in HCTZ-4ABA. QTAIM analyzed moderate role of hydrogen bonding interactions in HCTZ-4ABA. The calculated HOMO-LUMO energy gap shows that HCTZ-4ABA is chemically more active than HCTZ drug. These chemical parameters suggest that HCTZ-4ABA is chemically more reactive and softer than HCTZ. The results of this study suggest that cocrystals can be a good alternative for enhancing physicochemical properties of a drug without altering its therapeutic properties.

The Investigation on the Reactivity and the Formation of Halogen Bond Complexes for the Reactions of α-Nucleophiles XO- (X = F, *Cl, Br, I) and CH3CH2Cl

Precise prediction of reactivity and accurately identifying the types of reaction complexes are prerequisites for delineating the microscopic mechanisms of ion-molecule reactions, which remain unclear for reactions involving α-nucleophilic reagents. Here, we investigate the potential energy surface of the multiatomic reactions XO- (X = F, *Cl, Br, I) + CH3CH2Cl to elucidate the optimal descriptors for reaction reactivity and the origin of halogen bond/hydrogen bond compounds. Through analyzing the orbital composition and the relationship of energy barriers with the proton affinity and nucleophilic index, the local nucleophilic index is ultimately determined to be the optimal descriptor for predicting the reactivity of the reactions with α-nucleophilic reagents. Furthermore, it is found that the type of a reaction complex is closely related to the initial relative orientations of ions and molecules, the functional group substitutions, and the electrostatic potential extreme points of the halogen tops in the reactive substrates. In terms of the above factors, we can design suitable reaction substrates to generate intermolecular interactions with specific types, which is important in areas such as drug synthesis.

Theoretical Insight into Antioxidant Mechanism of Caffeic Acid Against Hydroperoxyl Radicals in Aqueous Medium at Different pH-Thermodynamic and Kinetic Aspects

In this study, the DFT/M062X/PCM method was applied to investigate thermodynamic and kinetic aspects of reactions involved in possible mechanisms of antioxidant activity of caffeic acid against HOO● radicals in aqueous medium at different pH values. Kinetic parameters of the reactions involved in HAT (Hydrogen Atom Transfer), RAF (Radical Adduct Formation), and SET (Single Electron Transfer) mechanisms, including reaction energy barriers and bimolecular rate constants, were determined, and identification and characterization of stationary points along the reaction pathways within HAT and RAF mechanisms were performed. Inspection of geometrical parameters and spin densities of the radical products formed within HAT and RAF mechanisms revealed that they are stabilized by hydrogen bonding interactions and the odd electron originated through the reaction with the HOO● radical is spread over the entire molecule, resulting in significant radical stabilization. Thermodynamic and kinetic data collected in this study indicated that increasing pH of the medium boosts the antioxidant activity of caffeic acid by reducing the energy required to generate radicals within the RAF and/or HAT mechanism and, at extremely high pH, where the trianionic form of caffeic acid is a dominant species, by the occurrence of an additional fast, diffusion-limited electron-related channel.

Deciphering the interactions between altertoxins and glutenin based on molecular dynamic simulation: inspiration from detection

BACKGROUND

Mycotoxin contamination of food has been gaining increasing attention. Hidden mycotoxins that interact with biological macromolecules in food could make the detection of mycotoxins less accurate, potentially leading to the underestimation of the total exposure risk. Interactions of the mycotoxins alternariol (AOH) and alternariol monomethyl ether (AME) with high-molecular glutenin were explored in this study.

RESULTS

The recovery rates of AOH and AME (1, 2, and 10 μg kg-1) in three types of grains (rice, corn, and wheat) were relatively low. Molecular dynamics (MD) simulations indicated that AOH and AME bound to glutenin spontaneously. Hydrogen bonds and π-π stacking were the primary interaction forces at the binding sites. Alternariol with one additional hydroxyl group exhibited stronger binding affinity to glutenin than AME when analyzing average local ionization energy. The average interaction energy between AOH and glutenin was -80.68 KJ mol-1, whereas that of AME was -67.11 KJ mol-1.

CONCLUSION

This study revealed the mechanisms of the interactions between AOH (or AME) and high-molecular glutenin using MD and molecular docking. This could be useful in the development of effective methods to detect pollution levels. These results could also play an important role in the evaluation of the toxicological properties of bound altertoxins. © 2024 Society of Chemical Industry.

Fumed-Si-Pr-Ald-Barb as a Fluorescent Chemosensor for the Hg2+ Detection and Cr2O72- Ions: A Combined Experimental and Computational Perspective

The surface of fumed silica nanoparticles was modified by pyridine carbaldehyde and barbituric acid to provide fumed-Si-Pr-Ald-Barb. The structure was identified and investigated through diverse techniques, such as FT-IR, EDX, Mapping, BET, XRD, SEM, and TGA. This nanocomposite was used to detect different cations and anions in a mixture of H2O:EtOH. The results showed that fumed-Si-Pr-Ald-Barb can selectively detect Hg2+ and Cr2O72- ions. The detection limits were calculated at about 5.4 × 10-3 M for Hg2+ and 3.3 × 10-3 M for Cr2O72- ions. A computational method (DFT) was applied to determine the active sites on the Pr-Ald-Barb for electrophilic and nucleophilic attacks. The HOMO-LUMO molecular orbital was calculated by B3LYP/6-311G(d,p)/LANL2DZ theoretical methods. The energy gap for the Pr-Ald-Barb and Pr-Ald-Barb+ion complexes was predicted by the EHOMO and ELUMO values. The DFT calculation confirms the suggested experimental mechanism for interacting the Pr-Ald-Barb with ions.

Ultrasonic-assisted synthesis and antitumor evaluation of novel variant heterocyclic compounds based on piperidine ring

Aim: This work explores the eco-friendly synthesis of various heterocycles from a piperidine-based compound (1) and explore their potential as antitumor agents.Materials & methods: Ultrasonic irradiation was used to synthesize heterocycles like pyridone, thiophene and coumarin, with computational tools analyzing stability and biological interactions.Results: Compounds 9 and 14 exhibit strong cytotoxic activity, surpassing doxorubicin. Compounds 2, 6, 10 and 13 exhibited intermediate activity, while compounds 3, 7 and 12 had minimal effects. Docking studies suggest potential ADORA1 receptor interaction. Computational tools analyze stability and interaction with biological systems, revealing potential antitumor mechanisms.Conclusion: Green synthesis of diverse heterocycles yielded potent antitumor agents (compounds 9 & 14). DFT and Docking studies suggest interaction with ADORA1 receptor, a potential mechanism.

A comprehensive electron wavefunction analysis toolbox for chemists, Multiwfn

Analysis of electron wavefunction is a key component of quantum chemistry investigations and is indispensable for the practical research of many chemical problems. After more than ten years of active development, the wavefunction analysis program Multiwfn has accumulated very rich functions, and its application scope has covered numerous aspects of theoretical chemical research, including charge distribution, chemical bond, electron localization and delocalization, aromaticity, intramolecular and intermolecular interactions, electronic excitation, and response property. This article systematically introduces the features and functions of the latest version of Multiwfn and provides many representative examples. Through this article, readers will be able to fully understand the characteristics and recognize the unique value of Multiwfn. The source code and precompiled executable files of Multiwfn, as well as the manual containing a detailed introduction to theoretical backgrounds and very rich tutorials, can all be downloaded for free from the Multiwfn website (http://sobereva.com/multiwfn).

Soluble metal porphyrins - Zero-valent zinc system for effective reductive defluorination of branched per and polyfluoroalkyl substances (PFASs)

Nano zero-valent metals (nZVMs) have been extensively utilized for decades in the reductive remediation of groundwater contaminated with chlorinated organic compounds, owing to their robust reducing capabilities, simple application, and cost-effectiveness. Nevertheless, there remains a dearth of information regarding the efficient reductive defluorination of linear or branched per- and polyfluoroalkyl substances (PFASs) using nZVMs as reductants, largely due to the absence of appropriate catalysts. In this work, various soluble porphyrin ligands [[meso‑tetra(4-carboxyphenyl)porphyrinato]cobalt(III)]Cl·7H2O (CoTCPP), [[meso‑tetra(4-sulfonatophenyl) porphyrinato]cobalt(III)]·9H2O (CoTPPS), and [[meso‑tetra(4-N-methylpyridyl) porphyrinato]cobalt(II)](I)4·4H2O (CoTMpyP) have been explored for defluorination of PFASs in the presence of the nZn0 as reductant. Among these, the cationic CoTMpyP showed best defluorination efficiencies for br-perfluorooctane sulfonate (PFOS) (94%), br-perfluorooctanoic acid (PFOA) (89%), and 3,7-Perfluorodecanoic acid (PFDA) (60%) after 1 day at 70 °C. The defluorination rate constant of this system (CoTMpyP-nZn0) is 88-164 times higher than the VB12-nZn0 system for the investigated br-PFASs. The CoTMpyP-nZn0 also performed effectively at room temperature (55% for br-PFOS, 55% for br-PFOA and 25% for 3,7-PFDA after 1day), demonstrating the great potential of in-situ application. The effect of various solubilizing substituents, electron transfer flow and corresponding PFASs defluorination pathways in the CoTMpyP-nZn0 system were investigated by both experiments and density functional theory (DFT) calculations. SYNOPSIS: Due to the unavailability of active catalysts, available information on reductive remediation of PFAS by zero-valent metals (ZVMs) is still inadequate. This study explores the effective defluorination of various branched PFASs using soluble porphyrin-ZVM systems and offers a systematic approach for designing the next generation of catalysts for PFAS remediation.

Mechanistic Analysis and Process Simulation of Ethyl Acetate-Ethanol Separation by Complex Solvent Extractive Distillation

Developing high-performance solvents for extraction and optimizing process technologies is crucial for efficient extractive distillation (ED) separation of azeotrope mixtures. In this paper, computer-aided screening was used to study the ED of azeotrope mixtures in ethyl acetate and ethanol systems using organic solvent dimethyl sulfoxide (DMSO) and ionic liquid (IL) ([EMIM][Ac]). The structural relationship between the ILs and the azeotrope mixture was analyzed by σ-profile, molecular surface electrostatic potential, interaction energy, and separation gradient. Subsequently, process simulation was carried out using Aspen Plus software and global optimization was performed with genetic algorithm, which found that both traditional organic solvents and ILs have good separation effects. But considering the high volatility of organic solvents and low saturation vapor pressure of ILs, it is considered to combine them to further explore the cost and carbon emission advantages in extractive distillation separation. Compared with pure organic solvent and pure ILs separation processes, the TAC of the process using an IL-based mixed solvent process decreased by 5.11 and 21.98%, respectively. The carbon emissions of the mixed extractant process were slightly higher than those of the pure organic solvent process, but the addition of ILs made very little volatilization of organic solvents, saving a charge for extractant use. By improving the process, waste heat is effectively recovered, which can save most of the utility engineering costs, and compared with the previous process, the total alkali consumption and carbon dioxide emissions are reduced by 9.43 and 27.17%, respectively. This exploration provides a theoretical reference for the development application and industrial research of ED processes using IL-based mixed solvents.

Evaluation of Free Radical Scavenging Ability of Triazole-3-Thiol: A Combination of Experimental and Theoretical Approaches

An assessment of the free radical scavenging potential of 4-amino-5-phenyl-4H-1,2,4-triazole-3-thiol (AT) and 4-amino-5-(4-pyridyl)-4H-1,2,4-triazole-3-thiol (AP) involved a combination of experimental methodologies and theoretical calculations. In the 2,2-diphenyl-1-picrylhydrazyl (DPPH•) assay, AT exhibited an heightened efficacy in scavenging DPPH• radicals compared to AP. This was evidenced by the notably lower IC50DPPH value observed for AT (1.3 × 10-3 ± 0.2 × 10-3 M) in comparison to AP (2.2 × 10-3 ± 0.1 × 10-3 M). Similarly, in the 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonate) (ABTS• +) test, AT exhibited superior ability in neutralizing ABTS•+ free radical cations compared to AP, with the computed IC50ABTS values of 4.7 × 10-5 ± 0.1 × 10-5 M for AT and 5.5 × 10-5 ± 0.2 × 10-5 M for AP. Density functional theory served as the tool for evaluating the correlation between structural attributes and the antioxidant efficacy of the studied molecules. The findings highlighted the flexibility of hydrogen atoms within NH and NH2 groups to nucleophilic attacks, indicative of their pivotal role in the scavenging mechanism. Furthermore, investigations into the interactions between AT and AP with the free radical HOO• revealed predominantly the reaction via the hydrogen atom transfer mechanism. Both experimental observations and theoretical deductions collectively affirmed AT's superior free radical scavenging ability over AP in the gas phase and ethanol.

Metal-Free, Hindered, Regioselective Access to Multifunctional Groups Diarylamines via SN Ar Substitution of P-Nitroso Aromatic Methyl Ether by Arylamines

Multifunctional groups diarylamines, an innovative product, efficiently produced from arylamines and p-nitrosoanisole derivatives by intermolecular SN Ar under weak acid conditions. This SN Ar proceeds under mild reaction conditions, and more significantly, the substrates involved do not necessarily require strong electron-withdrawing groups. Moreover, this SN Ar is characterized by resistance to space crowding, tolerance to halogen and nitroso functional groups, and high regioselectivity. Mechanistic observations suggest that the SN Ar is the result of the transfer of the positive charge center of the protonated nitroso group to the p-methoxy group.

Unveiling the Quantitative Relationships between Electron Distribution and Steric Hindrance of Organic Amines and Their Reaction Rates with Carbonyl Sulfur: A Theoretical Calculation Investigation

The removal of carbonyl sulfide (COS) commonly contained in natural gas is of great significance but still very challenging via a widely employed absorption process due to its low reactivity and solubility in various commercial solvents. Artificial intelligence (AI) is playing an increasingly important role in the exploration of desulfurization solvents. However, practically feasible AI models still lack a thorough understanding of the reaction mechanisms. Machine learning (ML) models established on chemical mechanisms exhibit enhanced chemical interpretability and prediction performance. In this study, we constructed a series of solvent molecules with varying functional groups, including linear aliphatic amines, cyclic aliphatic amines, and aromatic amines and proposed a three-step reaction pathway to dissect the effects of charge and steric hindrance of different substituents on their reaction rates with COS. Chemical descriptors, based on electrostatic potential (ESP), average local ionization energy (ALIE) theory, Hirshfeld charges, and Fukui functions, were used to correlate and predict the electrophilic reactivity of amine groups with COS. Substituents influence the reaction rate by changing the attraction interaction of amine groups to COS molecules and the electron rearrangement in the electrophilic reaction. Furthermore, they have more pronounced steric effects on the reaction rate in the linear amines. The descriptors N_ALIE and q(N) were found to be crucial in predicting the reactivity of amine groups with COS. Present study provides a comprehensive understanding of the reaction mechanisms of COS with amine compounds, offers specific chemical principles for the development of chemistry-driven ML models, sheds light on other types of electrophilic reactions occurring on amine and phosphine groups, and guides the development of chemical solvents in gas absorption processes.

DFT Exploration of Metal Ion-Ligand Binding: Toward Rational Design of Chelating Agent in Semiconductor Manufacturing

Chelating agents are commonly employed in microelectronic processes to prevent metal ion contamination. The ligand fragments of a chelating agent largely determine its binding strength to metal ions. Identification of ligands with suitable characteristics will facilitate the design of chelating agents to enhance the capture and removal of metal ions from the substrate in microelectronic processes. This study employed quantum chemical calculations to simulate the binding process between eleven ligands and the hydrated forms of Ni2+, Cu2+, Al3+, and Fe3+ ions. The binding strength between the metal ions and ligands was quantified using binding energy and binding enthalpy. Additionally, we explored the binding interaction mechanisms and explained the differences in binding abilities of the eleven ligands using frontier molecular orbitals, nucleophilic indexes, electrostatic potentials, and energy decomposition calculations based on molecular force fields. Based on our computational results, promising chelating agent structures are proposed, aiming to guide the design of new chelating agents to address metal ion contamination issues in integrated circuit processes.

Removal of sulfonamide antibiotics by a sonocatalytic Fenton-like reaction: Efficiency and mechanisms

With the widespread use of sulfonamide antibiotics (SAs), SAs are detected as residues in aquatic environments, posing a serious threat to human life and safety. Because of their high water solubility, fast transmission rate, and strong antibacterial properties, the safe disposal of SAs has become a key constraint for water quality assurance. Therefore, an ultrasound (US)-assisted zero-valent iron (ZVI)/persulfate (PS) system was proposed to explore the rapid and effective degradation of SAs. Comparative experiments were performed to study the removal of sulfadiazine (SDZ) by US, ZVI, PS, US/ZVI, US/PS, ZVI/PS, and US-ZVI/PS systems, respectively. Experimental results indicated that the highest removal efficiency of SDZ was ahieved in US-ZVI/PS system (97.4%), which were 2-44 times higher than that in other systems. Furthermore, the degradation efficiency of five typical SAs was achieved over 95%, demonstrating the effectiveness of the US ZVI/PS system for SAs removal. Also, quantum chemical computations for potential reactive sites of SAs and intermediate product detection by HPLC‒MS/MS were performed. The radical attack on active sites of SAs, such as N atom (number 7), was the main reason for SAs removal in US-ZVI/PS system. Besides, the common degradation pathways of six typical SAs were defined as S-N bond cleavage, C-N bond cleavage, benzene ring hydroxylation, aniline oxidation, and R substituent oxidation. Interestingly, the unique pathway of "SO2 group extraction" was observed in the degradation of six-membered ring SAs. Therefore, the US-ZVI/PS system is a promising and cost-effective method for the removal of SAs and other refractory pollutants.

Replacing CC Unit with B←N Unit in Isoelectronic Conjugated Polymers for Enhanced Photocatalytic Hydrogen Evolution

Three linear isoelectronic conjugated polymers PCC, PBC, and PBN are synthesized by Suzuki-Miyaura polycondensation for photocatalytic hydrogen (H2 ) production from water. PBN presented an excellent photocatalytic hydrogen evolution rate (HER) of 223.5 µmol h-1 (AQY420  = 23.3%) under visible light irradiation, which is 7 times that of PBC and 31 times that of PCC. The enhanced photocatalytic activity of PBN is due to the improved charge separation and transport of photo-induced electrons/holes originating from the lower exciton binding energy (Eb ), longer fluorescence lifetime, and stronger built-in electric field, caused by the introduction of the polar B←N unit into the polymer backbone. Moreover, the extension of the visible light absorption region and the enhancement of surface catalytic ability further increase the activity of PBN. This work reveals the potential of B←N fused structures as building blocks as well as proposes a rational design strategy for achieving high photocatalytic performance.

Fulvic acid enhanced peroxymonosulfate activation over Co-Fe binary metals for efficient degradation of emerging bisphenols

Bisphenol F (BPF) and bisphenol S (BPS) are emerging bisphenols, which have become the main substitutes for bisphenol A (BPA) in industrial production and are also considered as new environmental pollution challenges. Thus, the necessity for an effective approach to remove BPF and BPS is essential. In this study, fulvic acid (FA) was used to modify Co-Fe binary metals (CFO) for peroxymonosulfate (PMS) activation. The characterization results demonstrated that CFO changed significantly in morphology after compounding with FA, with smaller particle size and 5.6 times larger specific surface area, greatly increasing the active sites of catalyst; Moreover, humic acid-like compounds increased the surface functional groups of CFO, especially phenolic hydroxyl, which could effectively prolong the PMS activation. The concentration of all reactive species, such as SO₄•^-, •OH, O₂•^-, and ¹O₂ increased in FA@CFO/PMS system. As a result, the degradation efficiency of CFO for both BPF and BPS was significantly improved after compounding FA, which also had a wide range of pH applications. The degradation pathways of both BPF and BPS were proposed based on liquid chromatography-mass spectrometry (LC-MS) analysis and the density functional theory (DFT) calculations. Our findings are expected to provide new strategies and methods for remediation of environmental pollution caused by emerging bisphenols.

Electrocatalytic hydro-dehalogenation of halogenated organic pollutants from wastewater: A critical review

Halogenated organic pollutants are often found in wastewater effluent although it has been usually treated by advanced oxidation processes. Atomic hydrogen (H*)-mediated electrocatalytic dehalogenation, with an outperformed performance for breaking the strong carbon-halogen bonds, is of increasing significance for the efficient removal of halogenated organic compounds from water and wastewater. This review consolidates the recent advances in the electrocatalytic hydro-dehalogenation of toxic halogenated organic pollutants from contaminated water. The effect of the molecular structure (e.g., the number and type of halogens, electron-donating or electron-withdrawing groups) on dehalogenation reactivity is firstly predicted, revealing the nucleophilic properties of the existing halogenated organic pollutants. The specific contribution of the direct electron transfer and atomic hydrogen (H*)-mediated indirect electron transfer to dehalogenation efficiency has been established, aiming to better understand the dehalogenation mechanisms. The analyses of entropy and enthalpy illustrate that low pH has a lower energy barrier than that of high pH, facilitating the transformation from proton to H*. Furthermore, the quantitative relationship between dehalogenation efficiency and energy consumption shows an exponential increase of energy consumption for dehalogenation efficiency increasing from 90% to 100%. Lastly, challenges and perspectives are discussed for efficient dehalogenation and practical applications.

Computational Studies on the Reactivity of Polycyclic Aromatic Hydrocarbons

Polycyclic aromatic hydrocarbons (PAHs) are widely present in the environment as toxic pollutants. In this study, quantum chemistry methods are used to study reactions of PAHs in both particle and gas phases. Seven theoretical methods are exploited to predict the reactive sites of 15 PAHs in the particle phase. Among these methods, the performance of the condensed Fukui function (CFF) is optimum. The gas-phase reactions of eight PAHs are also investigated. Except for fluorene, CFF predicts correctly the gas-phase mono-nitro products for seven systems. The products of fluorene predicted by CFF are 1-nitrofluorene and 3-nitrofluorene, which is however inconsistent with the experimental results. Transition state theory is then used to investigate the reaction mechanism of fluorene. Calculated rate constants for 3-nitrofluorene and 2-nitrofluorene formation are much bigger than that for 1-nitrofluorene formation, which is in agreement with the experimental results.

Activation of persulfate by vanadium oxide modified carbon nanotube for 17β-estradiol degradation in soil: Mechanism, application and ecotoxicity assessment

Steroid hormones in the environment have attracted public attention because of their high endocrine-disrupting activity even at rather low exposure level. Excessive hormones in the soil from the pollutant discharge of intensive farming would pose a potential threat to the ecology and the human health. Vanadium oxide modified carbon nanotube (VO_X-CNT) was synthesized and applied as persulfate (PDS) activator to reduce17β-estrogen (17β-E2) in soil. 86.06 % 17β-E2 could be degraded within 12 h. Process of materials exchange during oxidation was interfered by soil, resulting in insufficient degradation of 17β-E2, but the active species involved in 17β-E2 degradation would also be enriched by it. 17β-E2 was adsorbed on the VO_X-CNT surface and directly degraded mainly by the active species generated on the catalyst surface, and ^•OH dominated the degradation of 17β-E2 in VO_X-CNT/PDS system. CO, defective sites and vanadium oxides on the surface of VO_X-CNT contributed to the generation of activate species. Oxidizer dosage, catalyst dosage, water-soil ratio and soil properties would affect the degradation of 17β-E2. The ecotoxicological impact on soil caused by VO_X-CNT/PDS was acceptable, and would be weakened with time. Additionally, a rapid decrease in the concentration of 17β-E2 and the promotion of maize growth were observed with VO_X-CNT/PDS in situ pilot-scale remediation. Those results reveal that VO_X-CNT/PDS is a potential technology to remove excessive steroid hormone from soil around large-scale livestock and poultry farms.

1,3 Dipolar Cycloaddition of Münchnones: Factors behind the Regioselectivity

The 1,3 dipolar cycloaddition reactions of münchnones and alkenes provide an expedite synthetic way to substituted pyrroles, an exceedingly important structural motif in the pharmaceutical and material science fields of research. The factors governing their regioselectivity rationalization are not well understood. Using several approaches, we investigate a set of 14 reactions (featuring two münchnones, 12 different alkenes, and two alkynes). The Natural Bond Theory and the Non-Covalent Interaction Index analyses of the noncovalent interaction energies fail to predict the experimental major regioisomer. Employing global cDFT descriptors or local ones such as the Fukui function and dual descriptor yields similarly inaccurate predictions. Only the local softness pairing, within Pearson's Hard and Soft Acids and Bases principle, constitutes a reliable predictor for the major reaction product. By taking into account an estimator for the steric effects, the correct regioisomer is predicted. Steric effects play a major role in driving the regioselectivity, as was corroborated by energy decomposition analysis of the transition states.

Theoretical and Experimental Investigation of the Antioxidation Mechanism of Loureirin C by Radical Scavenging for Treatment of Stroke

Recent pharmacological studies have shown that dragon's blood has an anti-cerebral ischemia effect. Loureirin C (LC), a kind of dihydrochalcone compound in dragon's blood, is believed to be play an important role in the treatment of ischemia stroke, but fewer studies for LC have been done. In this paper, we report the first experimental and theoretical studies on the antioxidation mechanism of LC by radical scavenging. The experimental studies show that LC has almost no effect on cell viability under 15 μM for the SH-SY5Y cells without any treatments. For the SH-SY5Y cells with oxygen and glucose deprivation-reperfusion (OGD/R) treatment, LC increased the viability of SH-SY5Y cells. The results of 2',7'-Dichlorodihydrofluorescein diacetate (DCFH-DA) and MitoSox Red experiments indicate that LC is very efficient in inhibiting the generation of the intracellular/mitochondrial reactive oxygen species (ROS) or removing these two kinds of generated ROS. The density functional theory (DFT) calculations allowed us to elucidate the antioxidation mechanisms of LC. Fukui function analysis reveals the radical scavenging of LC by hydrogen abstraction mechanism, the complex formation by e-transfer, and radical adduct formation (RAF) mechanism. Among the H-abstraction, the complex formation by e-transfer, and radical adduct formation (RAF) reactions on LC, the H-abstraction at O-H35 position by OH• is favorable with the smallest energy difference between the product and two reactants of the attack of OH• to LC of -0.0748 Ha. The bond dissociation enthalpies (BDE), proton affinities (PA), ionization potential (IP), proton dissociation enthalpy (PDE), and electron transfer enthalpy (ETE) were calculated to determine thermodynamically preferred reaction pathway for hydrogen abstraction mechanism. In water, IP and the lowest PDE value at O3-H35 position are lower than the lowest BDE value at O3-H35 position; 41.8986 and 34.221 kcal/mol, respectively, indicating that SEPT mechanism is a preferred one in water in comparison with the HAT mechanism. The PA value of O3-H35 of LC in water is -17.8594 kcal/mol, thus the first step of SPLET would occur spontaneously. The minimum value of ETE is higher than the minimum value of PDE at O3-H35 position and IP value, 14.7332 and 22.4108 kcal/mol, respectively, which suggests that the SEPT mechanism is a preferred one in water in comparison with the SPLET mechanism. Thus, we can draw a conclusion that the SEPT mechanism of is the most favorite hydrogen abstraction mechanism in water, and O-H35 hydroxyl group has the greatest ability to donate H-atoms.

Stability, Bioavailability, and Structure-Activity Relationship of Casein-Derived Peptide YPVEPF with a Sleep-Enhancing Effect

YPVEPF (Tyr-Pro-Val-Glu-Pro-Phe) is an outstanding sleep-enhancing peptide derived from casein. This study aimed to evaluate the bioavailability of YPVEPF in vitro and in vivo and to explore its structure-activity relationship through a sleep test and cheminformatics. Our results showed that YPVEPF was unstable against gastrointestinal enzymes and almost totally degraded to YPVEP in vitro. However, the pharmaco-kinetics results in vivo showed that the C_max of YPVEPF was 10.38 ± 4.01 ng/mL at 5 min, and YPVEPF could be detected in the stomach, intestine, and brain at 12.89 ± 0.55, 10.26 ± 0.23, and 2.47 ± 0.55 ng/g, respectively. The main metabolites including YPVEP, YP, PVEPF, and PVEP were identified. We first explored whether the fragment YPVEP also had a strong sleep-enhancing effect, and the sleep-enhancing effects of PVEPF and PVEP (lacking a Tyr residue) significantly decreased compared with those of YPVEPF and YPVEP. Moreover, molecular docking and quantum calculations revealed that the N-terminus Tyr played a dominant role in YPVEPF and YPVEP. They had distinctive self-folding structures and varying electron-withdrawing properties of the groups at the N terminus, allowing different binding modes and electron/proton transfer.

Ce(Ⅲ) activates peroxymonosulfate for the degradation of substituted PAHs

Substituted polycyclic aromatic hydrocarbons (SPAHs) are being intensively investigated, considering their high toxicity. Additionally, the mechanism of the effect of substituents on the removal of SPAHs and the activation of Ce(III) ions on peroxymonosulfate (PMS) have not been explored. Here we evaluated the removal efficiency of SPAHs in the oxidation system constructed by Ce(Ⅲ) ions and PMS, with emphasized the effect of substituents on SPAHs degradation. Ce(Ⅲ) has high catalytic performance for PMS, and the degradation percentage of all pollutants was higher than 92%. The significantly negative correlation between the reaction rate constants of SPAHs and the highest occupied molecular orbital-the lowest unoccupied molecular orbital gap, confirms that substituents lead to the differences in the degradation of SPAHs. The generation of reactive oxygen species (SO₄^•-, ^•OH, and ¹O₂) is based on the electron transfer between Ce(Ⅲ) and PMS, and the contribution of ROS to substituted naphthalene varies due to the role of substituents. The Ce(Ⅳ)/Ce(Ⅲ) cycle accelerates the activation of PMS. Based on the transformation products and condensed Fukui function, the possible degradation pathways are inferred. In addition, inorganic anions and organic matter have little effect on the Ce(Ⅲ)/PMS system, which is a prerequisite for applying this system to real-world waste-water for SPAHs removal. This work demonstrates a new model of the degradation mechanism of SPAHs in the Ce(Ⅲ)/PMS system.

Hybridizing electron-mediated H5PMo10V2O40 with CdS/g-C3N4 for efficient photocatalytic performance of Z-scheme heterojunction in wastewater treatment

Photocatalytic technology has been considered as a promising method to alleviate environmental pollution owing to the dual characteristics of redox. The novel V-based H₅PMo₁₀V₂O₄₀ (HPA-2) photocatalyst with Z-scheme heterostructure was constructed. The energy level of HPA-2 matches well with CdS and g-C₃N₄ (CN) according to Mott-Schottky and UV-Vis diffused reflectance tests, which allows the efficient separation of photogenerated electrons. The optimized CdS/HPA-2/CN showed superior ability in Rhodamine B (RhB) degradation and reduction of Cr (Ⅵ) under visible light irradiation. The maximum rate constant reached 0.092 min^-1 for RhB degradation at 60 min and 0.260 min^-1 for Cr (Ⅵ) reduction at 20 min, respectively. The photocatalytic mechanism was analyzed by adding scavengers. The effect of active species for RhB degradation was determined as h⁺ > ·O₂^- > ·OH, while ·O₂^- and e^- were essential for the reduction of Cr (Ⅵ). Besides, cyclic tests exhibit excellent repeatability and stable structure of CdS/HPA-2/CN after four cycles. Meanwhile, the detailed degradation process of RhB involving de-ethylation, hydroxylation, substitution and decarboxylation was determined according to LC-MS and evaluated by Fukui function calculation. Furthermore, total organic carbon content decreased to 6.2% of the initial value. In this work, as an electron mediator, HPA-2 provides the inspiration for construction of Z-scheme heterojunction, and CdS/HPA-2/CN exhibits enormous potential in the environmental remediation by photocatalysis.

Horizontal planetary mechanochemical method for rapid and efficient remediation of high-concentration lindane-contaminated soils in an alkaline environment

Lindane is a persistent organic pollutant that has attracted worldwide attention because of its threat to human health and environmental security. A horizontal planetary mechanochemical method was developed for rapid and efficient degradation of lindane in soil in an alkaline environment. Under the condition of a very low reagent-to-soil ratio (R = 2%), ball-to-powder ratio (C_R = 6:1), rotation speed (r = 300 rpm) and high soil single treatment capacity (S_C = 60 g), the lindane in four typical soils (~ 100 mg/kg) can be degraded up to 96.30% in 10 min. This method can also remediate high-concentration lindane-contaminated soil (833 ± 26 mg/kg). The experimental results and theoretical calculations proved that the stepwise dechlorination and final carbonization of lindane in soil are mainly attributed to the combined action of mechanical energy and alkalinity. The bimolecular elimination (E2) reaction was the first step of lindane destruction. Subsequently, the unimolecular elimination (E1) reaction tended to occur with the weakening of alkalinity. Then, benzene was obtained through stepwise hydrogenolysis reaction. The last was the generation of carbon substances by fragmentation or condensation of benzene rings. This work proposes a practical remediation technology for organic contaminated soil and improves the understanding of the degradation pathways of lindane in soil in alkali-assisted mechanochemical system.

Prediction of •OH-Initiated and •NO3-Initiated Transformation Products of Polycyclic Aromatic Hydrocarbons by Electronic Structure Approaches

The abiotic reaction products of polycyclic aromatic hydrocarbons (PAHs) with hydroxyl radicals (^•OH) and nitrate radicals (^•NO₃) are nitro-, oxygen-, and hydroxyl-containing PAHs (NPAHs, OPAHs, and OHPAHs). Four methods of the highest occupied molecular orbital (HOMO), Fukui function (FF), dual descriptor (DD), and population of π electrons (PP-π) are selected to predict the chemical reactivity of PAHs attacked by ^•OH and ^•NO₃ in this study. The predicted ^•OH-initiated and ^•NO₃-initiated transformation products are compared with the main PAH transformation products (PAH-TPs) observed in the laboratory. The results indicate that PP-π and DD approaches fail to predict the transformation products of fused PAHs containing five-membered rings. By predicting the PAH-TPs of 13-14 out of the 15 parent PAHs accurately, HOMO and FF methods were shown to be suitable for predicting the transformation products formed from the abiotic reactions of fused PAHs with ^•OH and ^•NO₃.

NDMA formation during ozonation of DMAPA: Influencing factors, mechanisms, and new pathway exploration

Aliphatic amines, common constituents that contribute to dissolved organic nitrogen (DON), can quickly react with ozone due to the lone electron pair on the nitrogen atom and this may produce carcinogen N-Nitrosodimethylamine (NDMA). 3-(Dimethylamino)-1-propylamine (DMAPA) was chosen as a representative to elucidate the NDMA formation characteristics, kinetic rates, reaction pathways, and influencing factors during ozonation in this study. The results demonstrated that NDMA generated directly from DMAPA during ozonation. Moreover, the NDMA yields increased with ozone dosages. The NDMA molar yield increased and then decreased when the pH raised from 5 to 9, achieving the maximum value at pH 8. Hydroxyl radical (∙OH) played a promotional role in NDMA formation, and its scavenger dramatically cut down its yields. Low levels of Br^- facilitated NDMA formation, while the value significantly reduced when Br^- was up to 1 mM. The NDMA amount was slightly raised by NO₂^-, but it was inhibited by NH₄⁺ and NO₃^-. Moreover, it was also depressed by co-existing components in actual lake water. Based on the result of the Gaussian calculation, the LC-MS/MS and GC-MS analysis, four possible transformation pathways were proposed. The radical recombination was verified to be the primary pathway for ozone promoting NDMA formation from DMAPA.

Mechanisms and Kinetics Studies of Butylated Hydroxytoluene Degradation to Isobutene

2,6-Di-tert-butyl-hydroxytotulene (BHT) is a widely used antioxidant in various fields. In this study, we explored comprehensively the mechanisms and kinetics of BHT degradation to produce isobutene using the density functional theory method. Furthermore, the intrinsic chemical reactivity of BHT was investigated using the electrostatic potential, average local ionization energy, and Fukui function, and the most likely reaction site with OH radical was predicted. Two initiation pathways of BHT with OH radicals were reported. The OH addition pathways at the C2 site of BHT was found more likely to occur than the pathways of H abstracts from the t-butyl group due to the lower energy barrier. Rate constants of two initiation pathways were calculated by transition state theory, and they were promoted by the temperature rise. Mayer bond order and localized molecular orbitals analysis were conducted to reveal the variation of the chemical bonds in the reaction process. The tertiary butyl radical that had been generated in the OH-addition reaction was more likely to generate isobutene with the participation of oxygen. Overall, this research could help to reveal the transformation mechanism of isobutene produced by BHT degradation.

A fundamental study on selective extraction of Li+ with dibenzo-14-crown-4 ether: Toward new technology development for lithium recovery from brines

The present study has proposed a selective Li⁺ extraction process using a novel extractant of dibenzo-14-crown-4 ether functionalized with an alkyl C16 chain (DB14C4-C16) synthesized based on the ion imprinting technology (IIT). Theoretical analysis of the possible complexes formed by DB14C4-C16 with Li⁺ and the competing ions of Na⁺, K⁺, Ca²⁺ and Mg²⁺ was performed through density functional theory (DFT) modeling. The Gibbs free energy change of the complexes of metal ions with DB14C4-C16 and water molecules were calculated to be -125.81 and -166.01 kJ/mol for lithium, -55.73 and -117.77 kJ/mol for sodium, and -196.02 and -291.52 kJ/mol for magnesium, respectively. Furthermore, the solvent extraction experiments were carried out in both single Li⁺ and multi-ions containing solutions, and the results delivered a good selectivity of DB14C4-C16 towards Li⁺ over the competing ions, showing separation coefficients of 68.09 for Ca²⁺-Li⁺, 24.53 for K⁺-Li⁺, 16.32 for Na⁺-Li⁺, and 3.99 for Mg²⁺-Li⁺ under the optimal conditions. The experimental results are generally in agreement with the theoretical calculations.

Cephalexin degradation initiated by OH radicals: theoretical prediction of the mechanisms and the toxicity of byproducts

In this work, the density functional theory is used to study the local reactivity of cephalexin (CLX) to radical attack and explain the mechanism of the reaction between CLX and hydroxyl radical attack leading to degradation byproducts. The reaction between •OH and CLX is supposed to lead to either an addition of a hydroxyl radical or an abstraction of a hydrogen. The results showed that the affinity of cephalexin for addition reactions increases as it passes from the gas to the aqueous phase and decreases as it passes from the neutral to the ionized form. Thermodynamic data confirmed that OH addition radicals (R_add) are thermodynamically favored over H abstraction radicals (R_abs). The ecotoxicity assessments of CLX and its byproducts are estimated from the acute toxicities toward green algae, Daphnia, and fish. The formation of byproducts is safe for aquatic organisms, and only one byproduct is harmful to Daphnia.

H3PO4 activation mediated the iron phase transformation and enhanced the removal of bisphenol A on iron carbide-loaded activated biochar

Zero valent iron-loaded biochar (Fe⁰-BC) has shown promise for the removal of various organic pollutants, but is restricted by reduced specific surface area, low utilization efficiency and limited production of reactive oxygen species (ROS). In this study, iron carbide-loaded activated biochar (Fe₃C-AB) with a high surface area was synthesized through the pyrolysis of H₃PO₄ activated biochar with Fe(NO₃)₃, tested for removing bisphenol A (BPA) and elucidated the adsorption and degradation mechanisms. As a result, H₃PO₄ activated biochar was beneficial for the transformation of Fe⁰ to Fe₃C. Fe₃C-AB exhibited a significantly higher removal rate and removal capacity for BPA than that of Fe⁰-BC within a wide pH range of 5.0-11.0, and its performance was maintained even under extremely high salinity and different water sources. Moreover, X-ray photoelectron spectra and density functional theory calculations confirmed that hydrogen bonds were formed between the COOH groups and BPA. ¹O₂ was the major reactive species, constituting 37.0% of the removal efficiency in the degradation of BPA by Fe₃C-AB. Density functional reactivity theory showed that degradation pathway 2 of BPA was preferentially attacked by ROS. Thus, Fe₃C-AB with low cost and excellent recycling performance could be an alternative candidate for the efficient removal of contaminants.

Meta-Hybrid Density Functional Theory Prediction of the Reactivity, Stability, and IGM of Azepane, Oxepane, Thiepane, and Halogenated Cycloheptane

The application of plain cycloalkanes and heterocyclic derivatives in the synthesis of valuable natural products and pharmacologically active intermediates has increased tremendously in recent times with much attention being paid to the lower cycloalkane members. The structural and molecular properties of higher seven-membered and nonaromatic heterocyclic derivatives are less known despite their stable nature and vast application; thus, an insight into their structural and electronic properties is still needed. Appropriate quantum chemical calculations utilizing the ab initio (MP2) method, meta-hybrid (M06-2X) functional, and long-range-separated functionals (ωB97XD) have been utilized in this work to investigate the structural reactivity, stability, and behavior of substituents on cycloheptane (CHP) and its derivatives: azepane, oxepane, thiepane, fluorocycloheptane (FCHP), bromocycloheptane (BrCHP), and chlorocycloheptane (ClCHP). Molecular global reactivity descriptors such as Fukui function, frontier molecular orbitals (FMOs), and molecular electrostatic potential were computed and compared with lower members. The results of two population methods CHELPG and Atomic Dipole Corrected Hirshfeld Charges (ADCH) were equally compared to scrutinize the charge distribution in the molecules. The susceptibility of intramolecular interactions between the substituents and cycloalkane ring is revealed by natural bond orbital analysis and intramolecular weak interactions by the independent gradient model (IGM). Other properties such as atomic density of states, intrinsic bond strength index (IBSI), and dipole moments are considered. It is acclaimed that the strain effect is a major determinant effect in the energy balance of cyclic molecules; thus, the ring strain energies and validation of spectroscopic specificities with reference to the X-ray crystallographic data are also considered.

Assembling covalent organic framework membranes with superior ion exchange capacity

Ionic covalent organic framework membranes (iCOFMs) hold great promise in ion conduction-relevant applications because the high content and monodispersed ionic groups could afford superior ion conduction. The key to push the upper limit of ion conductivity is to maximize the ion exchange capacity (IEC). Here, we explore iCOFMs with a superhigh ion exchange capacity of 4.6 mmol g⁻¹, using a dual-activation interfacial polymerization strategy. Fukui function is employed as a descriptor of monomer reactivity. We use Brønsted acid to activate aldehyde monomers in organic phase and Brønsted base to activate ionic amine monomers in water phase. After the dual-activation, the reaction between aldehyde monomer and amine monomer at the water-organic interface is significantly accelerated, leading to iCOFMs with high crystallinity. The resultant iCOFMs display a prominent proton conductivity up to 0.66 S cm⁻¹, holding great promise in ion transport and ionic separation applications.

Covalent organic framework-based membranes are highly tunable materials with potential use in a variety of applications. Here the authors report a dual-activation interfacial polymerization strategy to prepare ionic covalent organic framework membranes with high ion exchange capacity.