Cortical Bone Porosity: What Is It, Why Is It Important, and How Can We Detect It?

Different methionine to cysteine supplementation ratios altered bone quality of broilers with or without Eimeria challenge assessed by dual energy X-ray absorptiometry and microtomography

Despite the acknowledged significance of nutrition in bone development, effects of methionine (Met) and cysteine (Cys) on bone quality remain under-researched, particularly during Eimeria challenge. We investigated the effects of different supplemental Met to Cys ratios (MCR) on bone quality of broilers under Eimeria challenge. A total of 720 fourteen-day old Cobb500 broilers were allocated into a 5 × 2 factorial arrangement. Five diets with Met and Cys supplemented at MCR of 100:0, 75:25, 50:50, 25:75, and 0:100 were fed to the birds with or without Eimeria challenge. Body composition was measured by dual energy x-ray absorptiometry, and the femur bone characteristics were assessed by microtomography. Data were analyzed by two-way ANOVA and orthogonal polynomial contrast. The results reaffirmed the detrimental effects of Eimeria challenge on bone quality. On 9 d post inoculation (DPI), significant interaction effects were found for whole body bone mineral content (BMC), lean tissue weight, and body weight (P < 0.05); in the nonchallenged group (NCG), these parameters linearly decreased as MCR decreased (P < 0.05). In the challenged group (CG), body weight and lean tissue weight were unaffected by MCR, and BMC linearly increased as MCR decreased (P < 0.05). For the cortical bone of femoral metaphysis on 6 DPI, bone mineral density (BMD) linearly increased as MCR decreased (P < 0.05). Bone volume to tissue volume ratio (BV/TV) in the CG linearly increased as MCR decreased (P < 0.05). On 9 DPI, BMC and TV linearly increased as MCR decreased (P < 0.05) in the NCG. BMD and BV/TV changed quadratically as MCR decreased (P < 0.05). For the trabecular bone of femoral metaphysis on 9 DPI, BV/TV, and trabecular number linearly increased as MCR decreased (P < 0.05) in the NCG. For the femoral diaphysis, BV, TV, BMC on 6 DPI, and BMD on 9 DPI linearly increased as MCR decreased (P < 0.05). In conclusion, this study showed that both Eimeria challenge and varying supplemental MCR could influence bone quality of broilers.

Impact of heavy alcohol consumption on cortical bone mechanical properties in male rhesus macaques

Chronic heavy alcohol consumption may influence the skeleton by suppressing intracortical bone remodeling which may impact the quality of bone and its mechanical properties. However, this aspect has not been thoroughly assessed in either humans or animal models whose cortical bone microstructure resembles the microstructure of human cortical bone. The current study is the first to investigate the effects of chronic heavy alcohol consumption on various mechanical properties of bone in a non-human primate model with intracortical remodeling. Male rhesus macaques (5.3 years old at the initiation of treatment) were induced to drink alcohol and then given the choice to voluntarily self-administer water or ethanol (4 % w/v) for approximately 14 months, followed by three abstinence phases (lasting 34, 41, and 39-46 days) with approximately 3 months of ethanol access in between. During the initial 14 months of open-access, monkeys in the alcohol group consumed an average of 2.9 ± 0.8 g/kg/d ethanol (mean ± SD) resulting in a blood ethanol concentration of 89 ± 47 mg/dl in longitudinal samples taken at 7 h after the daily sessions began. To understand the impact of alcohol consumption on material properties, various mechanical tests were conducted on the distal tibia diaphysis of 2-5 monkeys per test group, including dynamic mechanical analysis (DMA) testing, nano-indentation, microhardness testing, compression testing, and fracture resistance curve (R-curve) testing. Additionally, compositional analyses were performed using Fourier-transform infrared (FTIR) spectroscopy. Significant differences in microhardness, compressive stress-strain response, and composition were not observed with alcohol consumption, and only minor differences were detected in hardness and elastic modulus of the matrix and osteons from nanoindentation. Furthermore, the R-curves of both groups overlapped, with similar crack initiation toughness, despite a significant decrease in crack growth toughness (p = 0.032) with alcohol consumption. However, storage modulus (p = 0.029) and loss factor (p = 0.015) from DMA testing were significantly increased in the alcohol group compared to the control group, while loss modulus remained unchanged. These results indicate that heavy alcohol consumption may have only a minor influence on the material properties and the composition of cortical bone in young adult male rhesus macaques.

Evaluation of bone-related mechanical properties in female patients with long-term remission of Cushing's syndrome using quantitative computed tomography-based finite element analysis

BACKGROUND

Hypercortisolism in Cushing's syndrome (CS) is associated with bone loss, skeletal fragility, and altered bone quality. No studies evaluated bone geometric and strain-stress values in CS patients after remission thus far.

PATIENTS AND METHODS

Thirty-two women with CS in remission (mean age [±SD] 51 ± 11; body mass index [BMI], 27 ± 4 kg/m2; mean time of remission, 120 ± 90 months) and 32 age-, BMI-, and gonadal status-matched female controls. Quantitative computed tomography (QCT) was used to assess volumetric bone mineral density (vBMD) and buckling ratio, cross-sectional area, and average cortical thickness at the level of the proximal femur. Finite element (FE) models were generated from QCT to calculate strain and stress values (maximum principal strain [MPE], maximum strain energy density [SED], maximum Von Mises [VM], and maximum principal stress [MPS]). Areal BMD (aBMD) and trabecular bone score (TBS) were assessed by dual-energy X-ray absorptiometry (2D DXA).

RESULTS

Trabecular vBMD at total hip and trochanter were lower in CS as compared with controls (P < .05). Average cortical thickness was lower, and buckling ratio was greater in CS vs controls (P < .01). All strain and stress values were higher in CS patients vs controls (P < .05). 2D DXA-derived measures were similar between patients and controls (P > .05). Prior hypercortisolism predicted both VM (β .30, P = .014) and MPS (β .30, P = .015), after adjusting for age, BMI, menopause, delay to diagnosis, and duration of remission.

CONCLUSIONS

Women with prior hypercortisolism have reduced trabecular vBMD and impaired bone geometrical and mechanical properties, which may contribute to an elevated fracture risk despite long-term remission.

Trabecular bone deterioration in a postmenopausal female suffering multiple spontaneous vertebral fractures due to a delayed denosumab injection - A post-treatment re-initiation bone biopsy-based case study

Background

Denosumab, is a potent anti-resorptive that, increases bone mineral density, and reduces fracture risk in osteoporotic patients. However, several case studies have reported multiple vertebral fractures in patients discontinuing denosumab.

Case presentation

This case report describes a 64-year-old female with postmenopausal osteoporosis treated with denosumab, who had her 11th injection delayed by 4 months. The patient suffered eight spontaneous vertebral fractures. After consent, an iliac crest bone biopsy was obtained following re-initiation of the denosumab treatment and analyzed by micro-computed tomography and histomorphometry.

Results

micro-computed tomography analysis revealed a low trabecular bone volume of 10 %, a low trabecular thickness of 97 μm, a low trabecular spacing of 546 μm, a high trabecular number of 1.8/mm, and a high structure model index of 2.2, suggesting trabecular thinning and loss of trabecular plates. Histomorphometric trabecular bone analysis revealed an eroded perimeter per bone perimeter of 33 % and an osteoid perimeter per bone perimeter of 62 %. Importantly, 88 % of the osteoid perimeter was immediately above an eroded-scalloped cement line with no sign of mineralization, and often with no clear bone-forming osteoblasts on the surface. Moreover, only 5 % of the bone perimeter was mineralizing, reflecting that only 8 % of the osteoid perimeter underwent mineralization, resulting in a mineralization lag time of 545 days. Taken together, this indicates limited bone formation and delayed mineralization.

Conclusion

We present a case report of multiple vertebral fractures after denosumab discontinuation with histomorphometric evidence that denosumab discontinuation leads to extensive trabecular bone resorption followed by a limited bone formation and delayed mineralization if the denosumab treatment is reinitiated. This highlights the importance of developing optimal discontinuation strategies for patients that are to discontinue treatment.

Changes in Bone Quality after Treatment with Etelcalcetide

INTRODUCTION

Secondary hyperparathyroidism is associated with osteoporosis and fractures. Etelcalcetide is an intravenous calcimimetic for the control of hyperparathyroidism in patients on hemodialysis. Effects of etelcalcetide on the skeleton are unknown.

METHODS

In a single-arm, open-label, 36-week prospective trial, we hypothesized that etelcalcetide improves bone quality and strength without damaging bone-tissue quality. Participants were 18 years or older, on hemodialysis ≥1 year, without calcimimetic exposure within 12 weeks of enrollment. We measured pretreatment and post-treatment areal bone mineral density by dual-energy X-ray absorptiometry, central skeleton trabecular microarchitecture by trabecular bone score, and peripheral skeleton volumetric bone density, geometry, microarchitecture, and estimated strength by high-resolution peripheral quantitative computed tomography. Bone-tissue quality was assessed using quadruple-label bone biopsy in a subset of patients. Paired t tests were used in our analysis.

RESULTS

Twenty-two participants were enrolled; 13 completed follow-up (mean±SD age 51±14 years, 53% male, and 15% White). Five underwent bone biopsy (mean±SD age 52±16 years and 80% female). Over 36 weeks, parathyroid hormone levels declined 67%±9% ( P < 0.001); areal bone mineral density at the spine, femoral neck, and total hip increased 3%±1%, 7%±2%, and 3%±1%, respectively ( P < 0.05); spine trabecular bone score increased 10%±2% ( P < 0.001); and radius stiffness and failure load trended to a 7%±4% ( P = 0.05) and 6%±4% increase ( P = 0.06), respectively. Bone biopsy demonstrated a decreased bone formation rate (mean difference -25±4 µ m 3 / µ m 2 per year; P < 0.01).

CONCLUSIONS

Treatment with etelcalcetide for 36 weeks was associated with improvements in central skeleton areal bone mineral density and trabecular quality and lowered bone turnover without affecting bone material properties.

CLINICAL TRIAL REGISTRY NAME AND REGISTRATION NUMBER

The Effect of Etelcalcetide on CKD-MBD (Parsabiv-MBD), NCT03960437.

Relationship between CT-Derived Bone Mineral Density and UTE-MR-Derived Porosity Index in Equine Third Metacarpal and Metatarsal Bones

Fatigue-related subchondral bone injuries of the third metacarpal/metatarsal (McIII/MtIII) bones are common causes of wastage, and they are welfare concerns in racehorses. A better understanding of bone health and strength would improve animal welfare and be of benefit for the racing industry. The porosity index (PI) is an indirect measure of osseous pore size and number in bones, and it is therefore an interesting indicator of bone strength. MRI of compact bone using traditional methods, even with short echo times, fail to generate enough signal to assess bone architecture as water protons are tightly bound. Ultra-short echo time (UTE) sequences aim to increase the amount of signal detected in equine McIII/MtIII condyles. Cadaver specimens were imaged using a novel dual-echo UTE MRI technique, and PI was calculated and validated against quantitative CT-derived bone mineral density (BMD) measures. BMD and PI are inversely correlated in equine distal Mc/MtIII bone, with a weak mean r value of -0.29. There is a statistically significant difference in r values between the forelimbs and hindlimbs. Further work is needed to assess how correlation patterns behave in different areas of bone and to evaluate PI in horses with and without clinically relevant stress injuries.

Fabrication and Characterization of Porous Diopside/Akermanite Ceramics with Prospective Tissue Engineering Applications

Tissue engineering requires new materials that can be used to replace damaged bone parts. Since hydroxyapatite, currently widely used, has low mechanical resistance, silicate ceramics can represent an alternative. The aim of this study was to obtain porous ceramics based on diopside (CaMgSi2O6) and akermanite (Ca2MgSi2O7) obtained at low sintering temperatures. The powder synthesized by the sol-gel method was pressed in the presence of a porogenic agent represented by commercial sucrose in order to create the desired porosity. The ceramic bodies obtained after sintering thermal treatment at 1050 °C and 1250 °C, respectively, were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR) to determine the chemical composition. The open porosity was situated between 32.5 and 34.6%, and the compressive strength had a maximum value of 11.4 MPa for the samples sintered at 1250 °C in the presence of a 20% wt porogenic agent. A cell viability above 70% and the rapid development of an apatitic phase layer make these materials good candidates for use in hard tissue engineering.

Germ-Free C57BL/6 Mice Have Increased Bone Mass and Altered Matrix Properties but Not Decreased Bone Fracture Resistance

The gut microbiome impacts bone mass, which implies a disruption to bone homeostasis. However, it is not yet clear how the gut microbiome affects the regulation of bone mass and bone quality. We hypothesized that germ-free (GF) mice have increased bone mass and decreased bone toughness compared with conventionally housed mice. We tested this hypothesis using adult (20- to 21-week-old) C57BL/6J GF and conventionally raised female and male mice (n = 6-10/group). Trabecular microarchitecture and cortical geometry were measured from micro-CT of the femur distal metaphysis and cortical midshaft. Whole-femur strength and estimated material properties were measured using three-point bending and notched fracture toughness. Bone matrix properties were measured for the cortical femur by quantitative back-scattered electron imaging and nanoindentation, and, for the humerus, by Raman spectroscopy and fluorescent advanced glycation end product (fAGE) assay. Shifts in cortical tissue metabolism were measured from the contralateral humerus. GF mice had reduced bone resorption, increased trabecular bone microarchitecture, increased tissue strength and decreased whole-bone strength that was not explained by differences in bone size, increased tissue mineralization and fAGEs, and altered collagen structure that did not decrease fracture toughness. We observed several sex differences in GF mice, most notably for bone tissue metabolism. Male GF mice had a greater signature of amino acid metabolism, and female GF mice had a greater signature of lipid metabolism, exceeding the metabolic sex differences of the conventional mice. Together, these data demonstrate that the GF state in C57BL/6J mice alters bone mass and matrix properties but does not decrease bone fracture resistance. © 2023 The Authors. Journal of Bone and Mineral Research published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research (ASBMR).

Ultrasound Characterization of Cortical Bone Using Shannon Entropy

OBJECTIVE

Ultrasound backscattered signals encompass information on the microstructure of heterogeneous media such as cortical bone, in which pores act as scatterers and result in the scattering and multiple scattering of ultrasound waves. The objective of this study was to investigate whether Shannon entropy can be exploited to characterize cortical porosity.

METHODS

In the study described here, to demonstrate proof of concept, Shannon entropy was used as a quantitative ultrasound parameter to experimentally evaluate microstructural changes in samples with controlled scatterer concentrations made of a highly absorbing polydimethylsiloxane matrix (PDMS). Similar assessment was then performed using numerical simulations on cortical bone structures with varying average pore diameter (Ct.Po.Dm.), density (Ct.Po.Dn.) and porosity (Ct.Po.).

RESULTS

The results suggest that an increase in pore diameter and porosity lead to an increase in entropy, indicating increased levels of randomness in the signals as a result of increased scattering. The entropy-versus-scatterer volume fraction in PDMS samples indicates an initial increasing trend that slows down as the scatterer concentration increases. High levels of attenuation cause the signal amplitudes and corresponding entropy values to decrease drastically. The same trend is observed when porosity of the bone samples is increased above 15%.

CONCLUSION

Sensitivity of entropy to microstructural changes in highly scattering and absorbing media can potentially be exploited to diagnose and monitor osteoporosis.

A multimodal 3D imaging approach of pore networks in the human femur to assess age-associated vascular expansion and Lacuno-Canalicular reduction

Cellular communication in the mechanosensory osteocyte Lacuno-Canalicular Network (LCN) regulates bone tissue remodeling throughout life. Age-associated declines in LCN size and connectivity dysregulate mechanosensitivity to localized remodeling needs of aging or damaged tissue, compromising bone quality. Synchrotron radiation-based micro-Computed Tomography (SRμCT) and Confocal Laser Scanning Microscopy (CLSM) were employed to visualize LCN and vascular canal morphometry in an age series of the anterior femur (males n = 14, females n = 11, age range = 19-101, mean age = 55). Age-associated increases in vascular porosity were driven by pore coalescence, including a significant expansion in pore diameter and a significant decline in pore density. In contrast, the LCN showed significant age-associated reductions in lacunar volume fraction, mean diameter, and density, and in canalicular volume fraction and connectivity density. Lacunar density was significantly lower in females across the lifespan, exacerbating their age-associated decline. Canalicular connectivity density was also significantly lower in females but approached comparable declining male values in older age. Our data illuminate the trajectory and potential morphometric sources of age-associated bone loss. Increased vascular porosity contributes to bone fragility with aging, while an increasingly reduced and disconnected LCN undermines the mechanosensitivity required to repair and reinforce bone. Understanding why and how this degradation occurs is essential for improving the diagnosis and treatment of age-related changes in bone quality and fragility.

Computational modeling for osteogenic potential assessment of physical exercises based on loading-induced mechanobiological environments in cortical bone remodeling

Osteoporosis and disuse can cause bone loss which reduces the weight-bearing strength of long bones. Physical exercise or mechanical loading prevents bone loss as it promotes bone modeling through osteogenesis, i.e., new bone formation. Several studies have observed distinct bone remodeling responses to physical exercises; nevertheless, the underlying mechanism behind such responses is not well established. Loading-induced pore-pressure and fluid motion act as mechanobiological stimuli to bone cells namely osteocytes which further initiate osteoactivities. The shape of loading waveforms also affects the poromechanical environment of bone. Accordingly, the present study hypothesizes that loading waveforms associated with physiological exercises may expose the bone to different mechanobiological stimuli resulting in distinct bone remodeling. A poromechanical finite element model is developed to compute pore-pressure and interstitial fluid velocity in femoral cortical bone tissue (healthy and osteoporotic) subjected to loading waveforms of three physiological exercises namely walking, running, and jumping. The model also computes the mechanobiological stimulus as a function of fluid velocity. The outcomes indicate that pore-pressure and fluid velocity decrease significantly in osteoporotic bone tissue in comparison with healthy tissue. Jumping and running both improve pore-pressure and fluid velocity in healthy and osteoporotic tissues, whereas running significantly enhances mechanobiological stimulus in both the tissues which indicates a possible explanation for distinct bone remodeling to different physical exercises. The present work also suggests that running may be recommended as a potential biomechanical therapeutic to prevent bone loss. Overall, the present work contributes to the area of orthopedic research to develop effective designs of prophylactic exercises to improve bone health.

Quantification and comparison of the regional acceleratory phenomenon in bone following piezosurgery or bur osteotomy: A pilot study in rats

BACKGROUND/OBJECTIVE

The Regional Acceleratory Phenomenon (RAP) can be induced surgically via decortication (selective cortical penetrations) of bone to accelerate orthodontic tooth movement. Few studies have compared the impact and efficiency of different decortication methods to induce the RAP. The aim of this study was to determine if there is a significant difference in the intensity of the RAP induced by a surgical defect created either using a piezoelectric knife or a rotary bur.

METHODS

Twenty-two Sprague-Dawley rats were divided into two treatment groups (each n = 8) and a control group (n = 6). The treatment groups were subjected to transcortical penetrations (TP) of the right tibia using either a piezoelectric knife (PTP) or a rotary bur (BTP). The right tibias of the control group animals had reflection of tissues (SHAM) and the left legs were kept for comparison (INTACT). The animals were killed at 7 and 14 days after the operation in an equally distributed manner. Microcomputed tomography images were obtained and analyzed utilizing artificial intelligence for bone cortical porosity (Ct.Po) locally and regionally.

RESULTS/CONCLUSION

Regionally, TP using a PTP induced significantly (p < .05, Kruskal-Wallis test) more Ct.Po than BTP or INTACT for both the 7- and 14-day time points. PTP was not found to induce significantly more Ct.Po than SHAM at any time point. However, PTP induced significantly more Ct.Po than the INTACT group for each time point, while SHAM did not. The local analysis did not reveal any relevant significant differences between groups.

Pathology or expected morphology? Investigating patterns of cortical porosity and trabecularization during infancy and early childhood

Increased cortical porosity is associated with a heightened risk of skeletal fragility due to bone loss and structural decay in adults. However, few studies have examined the etiology of cortical porosity in infants and children. This study examines whether age-related changes in femoral growth and locomotor development influence femoral midshaft cortical porosity in a sample of 48 individuals (fetal to 3.99 years) from the 10th-13th century cemetery of St. Étienne de Toulouse, France. Histological sections were prepared and imaged using light microscopy. Midshaft geometric variables such as total area, cortical area, and pore area were calculated using BoneJ. Increased porosity and cortical trabecularization were found to be significantly associated with age, being almost exclusively present in individuals aged 0.5-1.99 years. At approximately 6 months of age infants typically begin engaging in regular femoral loading and experience an acceleration in growth. The observed increase in midshaft porosity and trabecularization, therefore, likely results from the reorganization and redistribution of cortical bone, stimulated by increased growth velocity and the onset of weight-bearing activities. The reduction in cortical porosity and trabecularization in individuals aged 2.0-3.99 years indicates that children are approaching some sort of homeostasis as growth velocity slows and their femora adapt to consistent loading. Understanding what expected skeletal development looks like is necessary when conducting bioarcheological studies and this study provides evidence for a pattern of transient midshaft porosity during infancy and early childhood.

The influence of intra-cortical microstructure on the contrast in ultrasound images of the cortex of long bones: A 2D simulation study

Decreased thickness of the bone cortex due to bone loss in the course of ageing and osteoporosis is associated with reduced bone strength. Cortical thickness measurement from ultrasound images was recently demonstrated in young adults. This requires the identification of both the outer (periosteum) and inner (endosteum) surfaces of the bone cortex. However, with bone loss, the cortical porosity and the size of the vascular pores increase resulting in enhanced ultrasound scattering which may prevent the detection of the endosteum. The aim of this work was to study the influence of cortical bone microstructure variables, such as porosity and pore size, on the contrast of the endosteum in ultrasound images. We wanted to estimate the range of these variables for which ultrasound imaging of the endosteum is feasible. We generated synthetic data using a two-dimensional time-domain code to simulate the propagation of elastodynamic waves. A synthetic aperture imaging sequence with an array transducer operating at a center frequency of 2.5 MHz was used. The numerical simulations were conducted for 105 cortical microstructures obtained from high resolution X-ray computed tomography images of ex vivo bone samples with a porosity ranging from 2% to 24 %. Images were reconstructed using a delay-and-sum (DAS) algorithm with optimized f-number, correction of refraction at the periosteum, and sample-specific wave-speed. We observed a range variation of 18 dB of endosteum contrast in our data set depending on the bone microstructure. We found that as porosity increases, speckle intensity inside the bone cortex increases whereas the intensity of the signal from the endosteum decreases. Also, a microstructure with large pores (diameter >250 μm) was associated with poor endosteum visibility, compared with a microstructure with equal porosity but a more narrow distribution of pore sizes. These findings suggest that ultrasound imaging of the bone cortex with a probe operating at a central frequency of 2.5 MHz using refraction-corrected DAS is capable of detecting the endosteum of a cortex with moderate porosity (less than about 10%) if the largest pores remain smaller than about 200 μm.

Tracking changes of individual cortical pores over 1 year via HR-pQCT in a small cohort of 60-year-old females

Introduction

High-resolution peripheral quantitative computed tomography (HR-pQCT) is a powerful tool that has revolutionized 3D longitudinal assessment of bone microarchitecture. However, cortical porosity, a common characteristic of cortical bone loss, is still often determined by static evaluation of overall porosity at one timepoint. Therefore, we sought to 1) describe a technique to evaluate individual cortical pore dynamics in aging females over one year using HR-pQCT imaging and 2) determine whether formation and expansion of pores would exceed contraction and infilling of pores.

Methods

HR-pQCT (60.7 μm resolution) images were acquired one year apart at the distal tibia and distal radius in seven female volunteers (60-72 years of age). Baseline and one-year images were registered at each bone site and a custom software was used to quantify dynamic activity of individual cortical pores using the following categories: developed, infilled, expanded, contracted, and static.

Results

Over the one-year period, cortical pores actively developed, contracted, expanded, and infilled. More pores expanded and developed vs. infilled or contracted leading to increased pore area in both tibial and radial sites (p = 0.0034 and p = 0.0474, respectively). Closed pores in the tibia, those that were not connected to the endosteal or periosteal surfaces, were the most dynamic of any pores type (open/closed) at either bone site.

Conclusion

This study demonstrates an approach to longitudinally track individual cortical pore activity in tibial and radial sites. These data expand conventional parameters for assessing cortical porosity and show increased porosity in one year of aging is caused by newly developed pores and expansion of existing pores.

Female bone physiology resilience in a past Polynesian Outlier community

Remodelling is a fundamental biological process involved in the maintenance of bone physiology and function. We know that a range of health and lifestyle factors can impact this process in living and past societies, but there is a notable gap in bone remodelling data for populations from the Pacific Islands. We conducted the first examination of femoral cortical histology in 69 individuals from ca. 440-150 BP Taumako in Solomon Islands, a remote 'Polynesian Outlier' island in Melanesia. We tested whether bone remodelling indicators differed between age groups, and biological sex validated using ancient DNA. Bone vascular canal and osteon size, vascular porosity, and localised osteon densities, corrected by femoral robusticity indices were examined. Females had statistically significantly higher vascular porosities when compared to males, but osteon densities and ratios of canal-osteon (~ 8%) did not differ between the sexes. Our results indicate that, compared to males, localised femoral bone tissue of the Taumako females did not drastically decline with age, contrary to what is often observed in modern populations. However, our results match findings in other archaeological samples-a testament to past female bone physiology resilience, also now observed in the Pacific region.

Expansion of the osteocytic lacunar-canalicular system involved in pharmacological action of PTH revealed by AI-driven fluorescence morphometry in female rabbits

Osteoporosis is an age-related disorder that is characterized by reduced bone mass. Its prevention and treatment are important healthcare issues for maintaining social activity in aged societies. Although bone fractures mostly occur at sites of weakened cortical bone, pathophysiological and pharmacological evaluations of bone mass have tended to be predominantly assessed in trabecular bone. To statistically characterize cortical bone remodeling, we originally established multimode fluorescence imaging and artificial intelligence (AI)-driven morphometric analyses in six-month-old female rabbits with well-defined cortical remodeling, similar to that in humans. We evaluated three distinct administration frequencies of teriparatide [TPTD; human parathyroid hormone, hPTH (1–34)]: once (1/w), twice (2/w), and seven times (7/w) a week, with the same total dose (140 μg/kg/week). Our analyses revealed significant expansions of the osteocytic lacunar-canalicular system and Haversian canals accompanied by the development of cortical porosity and endosteal naïve bone formation induced by a frequent administration regimen (7/w) of TPTD; however, once-weekly (1/w) and twice-weekly (2/w) administration of TPTD showed little effect. These findings demonstrate a clear contrast between the effects of frequent and infrequent administration of TPTD on cortical bone metabolism and suggest that osteocytic bone remodeling is involved in the pharmacological action of PTH.

Features of mandibular cortical bone morphology in osteoporotic fracture patients

PURPOSE

The diagnostic criteria for osteoporosis are based on the bone mineral density (BMD) level in the lumbar spine and femur bone. Patients with osteoporotic fractures were diagnosed with osteoporosis. While systemic BMD and mandibular cortical bone morphology are correlated, this has not been studied in patients with a history of osteoporotic fractures. Therefore, purpose of this study was researching the mandibular cortical bone morphology in patients with osteoporotic fractures.

METHODS

The subjects were 55 female and 20 male patients with osteoporotic fractures. Patients were divided into 30 primary osteoporosis patients and 45 secondary osteoporosis patients according to the medical history. Patients underwent BMD and panoramic radiography examinations during orthopedic treatment for fractures. A dual-energy X-ray absorptiometry system was used to measure BMD. Mandibular cortex index (MCI) and mandibular cortex width (MCW) were evaluated using machine-learning measurement software.

RESULTS

In the analysis of MCI, the ratio of class 2 and 3 was 73% of both primary osteoporosis and secondary osteoporosis. The average MCW was 2.19 mm for primary osteoporosis and 2.30 mm for secondary osteoporosis. The sensitivity values by MCI and MCW were 73% and 76% for both primary and secondary osteoporosis, which were similar detection powers. In addition, the false-negative rates by MCI and MCW were 27% and 24%.

CONCLUSION

We suggested that MCI and MCW are indicators of osteoporotic conditions in patients with primary and secondary osteoporosis. Our results show that MCI and MCW are non-inferior to the sensitivity values for lumbar BMD in patients with osteoporotic fractures.

Investigation of distal femur microarchitecture and factors influencing its deterioration: An ex vivo high-resolution peripheral quantitative computed tomography study

While fractures of the distal femur are often considered as fragility fractures, detailed knowledge of the bone microarchitecture at this skeletal site is largely unavailable. Initial evaluation of a patient cohort with distal femur fractures showed a markedly increased occurrence in elderly women. The purpose of this study was to determine the extent to which demographic characteristics of distal femur fractures are reflected by general age- and sex-specific variations in local microarchitectural parameters. Fifty cadaveric femora were collected from 25 subjects (12 females, 13 males, age 25-97 years). A volume of interest within 3 cm proximal to the condyles was analyzed using high-resolution peripheral quantitative computed tomography (HR-pQCT), which revealed impaired trabecular and cortical bone microarchitecture in women compared to men as well as in osteoporotic compared to normal or osteopenic subjects, as classified by dual-energy X-ray absorptiometry (DXA) T-score. Linear regression analyzes showed negative associations between age and HR-pQCT parameters in women (e.g., cortical thickness -14 µm/year, 95% CI: -21 to -7 µm/year), but not in men (e.g., cortical thickness 1 µm/year, 95% CI: -12 to 14 µm/year). HR-pQCT parameters showed strong positive associations with areal bone mineral density (aBMD) determined by DXA at the hip in both sexes. Taken together, our findings suggest that female sex, advanced age, and low aBMD represent major risk factors for impaired microarchitecture at the distal femur. Both the diagnostic value of DXA for predicting distal femur fractures and the efficacy of bone-specific agents on fracture risk reduction should be investigated in the future.

Ontogenetic changes in cortical bone vascular microstructure in the domestic duck (Anas platyrhynchos) and ring-necked pheasant (Phasianus colchicus)

Age‐related changes in bone microstructure can inform our understanding the biology of both extant and fossil birds, but to date, histological work in birds, and particularly work using high‐resolution 3D imaging, has largely been restricted to limited growth stages. We used minimally destructive synchrotron radiation‐based X‐ray computed tomography to visualise and measure key morphological and histological traits in 3D across development in the domestic duck and ring‐necked pheasant. We use these measurements to build on the database of key reference material for interpreting bone histology. We found that growth patterns differed between the two species, with the ducks showing rapid growth in their lower limbs and early lower limb maturation, while pheasants grew more slowly, reflecting their later age at maturity. In the pheasant, both walking and flight occur early and their upper and lower limbs grew at similar rates. In the duck, flight and wing development are delayed until the bird is almost at full body mass. Through juvenile development, the second moment of area for the duck wing was low but increased rapidly towards the age of flight, at which point it became significantly greater than that of the lower limb, or the pheasant. On a microstructural level, both cortical porosity and canal diameter were related to cortical bone deposition rate. In terms of orientation, vascular canals in the bone cortex were more laminar in the humerus and femur compared with the tibiotarsus, and laminarity increased through juvenile development in the humerus, but not the tibiotarsus, possibly reflecting torsional vs compressive loading. These age‐related changes in cortical bone vascular microstructure of the domestic duck and pheasant will help understanding the biology of both extant and fossil birds, including age estimation, growth rate and growth patterns, and limb function.

Acrylamide-based hydrogels with distinct osteogenic and chondrogenic differentiation potential

Regeneration solutions for the osteochondral interface depth are limited, where multi-material implants have the potential to delaminate affecting the regeneration process and impacting the final integrity of tissue interface. Here we explore regionally mixed hydrogel networks, presenting distinct chemical features to determine their compatibility in supporting osteogenic or chondrogenic cell behaviour and differentiation. Poly(N-isopropylacrylamide) (pNIPAM) and poly(N-tert-butylacrylamide) (pNTBAM) hydrogels were assessed in terms of their chemical differences, mechanical strength, internal architecture, porosity and capacity to support cell viability, migration, and differentiation. pNTBAM polymerized with a Young’s modulus of up to 371 ± 31 kPa compared to the more flexible pNIPAM, 16.5 ± 0.6 kPa. Viability testing revealed biocompatibility of both hydrogels with significantly increased cell numbers observed in pNTBAM (500 ± 95 viable cells/mm²) than in pNIPAM (60 ± 3 viable cells/mm²) (P ≤ 0.05). Mineralization determined through alkaline phosphatase (ALP) activity, calcium ion and annexin A2 markers of mineralization) and osteogenic behaviour (collagen I expression) were supported in both hydrogels, but to a greater extent in pNTBAM. pNTBAM supported significantly elevated levels of chondrogenic markers as evidenced by collagen II and glycosaminoglycan expression in comparison to little or no evidence in pNIPAM (P ≤ 0.05). In conclusion, structurally similar, chemically distinct, acrylamide hydrogels display variable capacities in supporting osteochondral cell behaviours. These systems demonstrate spatial control of cell interaction through simple changes in monomer chemistry. Fine control over chemical presentation during the fabrication of biomaterial implants could lead to greater efficacy and targeted regeneration of semi-complex tissues.

Ceramic Scaffolds for Bone Augmentation: Design and Characterization with SEM and Confocal Microscopy

Bone scaffolds must fulfil numerous and sometimes contradictory characteristics: biocompatibility, bioactivity, high porosity, and appropriate mechanical strength. To tackle some of these issues, this study has several aims for the development of such scaffolds for dentistry applications: (i) to utilize appropriate materials (ceramics and sponges) and to introduce a novel, potentially performant ceramic material; (ii) to characterize the obtained scaffolds by using a range of methods; (iii) to compare and to correlate the assessment results with the scope to validate them reciprocally. There are two commercially available dental ceramics (i.e., Ceramco iC Natural Enamel (E) and Ceramco iC Natural Dentine (D), (DeguDent GmbH, Hanau-Wolfgang, Deutschland)) that are considered, as well as a new-developed porcelain (ceramic C). To obtain porous structures of scaffolds, each ceramic is introduced in two different sponges: a denser one, green (G) and a less dense one, blue (B). A total of 60 samples are manufactured and divided in six study groups, obtained by combining the above materials: GE, BE, GD, BD, GC, and BC (where the first letter represents the sponge type and the second one the utilized ceramic). Several methods are applied to characterize their chemical composition, as well as their macro- and micro-porosity: X-ray Diffraction (XRD), apparent porosity measurements, scanning electronic microscopy (SEM), and confocal microscopy (CM). The latter two methods image the inner (porous) and the outer/cortical (denser) areas of the samples. The results show a good porosity (i.e., dimensions and uniformity of pores) of around 65% for the final group BC, with satisfactory values of around 51% for BD and GC. A certain correlation is made between SEM, CM, and the apparent porosity results. The biocompatibility of the new ceramic C is demonstrated. Finally, a necessary trade-off is made with the mechanical strength of the obtained scaffolds, which was also evaluated. From this point of view, Group BD has the highest compressive strength of around 4 MPa, while Group BC comes second, with around 2 MPa. This trade-off between porosity and mechanical strength suggests a choice between Groups BC and BD, which are the best with regard to the porosity and mechanical strength criterium, respectively.

Criteria, Challenges, and Opportunities for Acellularized Allogeneic/Xenogeneic Bone Grafts in Bone Repairing

As bone grafts become more commonly needed by patients and as donors become scarcer, acellularized bone grafts (ABGs) are becoming more popular for restorative purposes. While autogeneic grafts are reliable as a gold standard, allogeneic and xenogeneic ABGs have been shown to be of particular interest due to the limited availability of autogeneic resources and reduced patient well-being in long-term surgeries. Because of the complete similarity of their structures with native bone, excellent mechanical properties, high biocompatibility, and similarities of biological behaviors (osteoinductive and osteoconductive) with local bones, successful outcomes of allogeneic and xenogeneic ABGs in both in vitro and in vivo research have raised hopes of repairing patients' bone injuries in clinical applications. However, clinical trials have been delayed due to a lack of standardized protocols pertaining to acellularization, cell seeding, maintenance, and diversity of ABG evaluation criteria. This study sought to uncover these factors by exploring the bone structures, ossification properties of ABGs, sources, benefits, and challenges of acellularization approaches (physical, chemical, and enzymatic), cell loading, and type of cells used and effects of each of the above items on the regenerative technologies. To gain a perspective on the repair and commercialization of products before implementing new research activities, this study describes the differences between ABGs created by various techniques and methods applied to them. With a comprehensive understanding of ABG behavior, future research focused on treating bone defects could provide a better way to combine the treatment approaches needed to treat bone defects.

Cortical bone density by quantitative computed tomography mirrors disorders of bone structure in bone biopsy of non-dialysis CKD patients

Bone biopsy is still the gold standard tool to evaluate either trabecular or cortical bone, though the quantitative computed tomography of the vertebrae (QCT), a non-invasive technique, could be useful to evaluate bone structure in patients with chronic kidney disease (CKD). Cortical bone microstructure derangements have been associated with poor outcomes in the general population. An association between trabecular bone density, assessed by QCT, and bone volume and microarchitecture by histomorphometry, has been previously documented. This relationship has not yet been fully evaluated in cortical bone in the CKD scenario. The aim of this study was to evaluate the relationship among vertebrae density measured by QCT, structural histomorphometric parameters of cortical bone and biochemical and hormonal data in 50 CKD stage 2-5ND patients. This was a post hoc analysis of a cross-sectional study where cortical porosity and cortical thickness were analyzed in undecalcified bone samples from the iliac crest. The cortical bone density was obtained by QCT from the thoracic vertebrae. The patients were 52 ± 10 years, 68% men, 30% diabetes and the estimated glomerular filtration rate 34 ± 16 mL/min/1.73 m2. Cortical porosity was 4.6% (3.6; 6.6) and cortical thickness was 578.4 ± 151.8 μm, while cortical bone density was 149.2 ± 58.3 HU. Cortical density correlated with cortical thickness (p = 0.001) but not with cortical porosity (p = 0.30). Higher porosity was associated with older age (p = 0.02), higher levels of PTH (p = 0.04) and lower renal function (p = 0.03), while smaller thickness was associated with higher levels of PTH (p = 0.02). Lower density was associated with older age (p = 0.02) and higher levels of PTH (p = 0.01). In conclusion, cortical bone density measured by QCT was able to mirror the cortical thickness of bone biopsy in pre-dialysis CKD patients. In addition, PTH action on cortical bone can be already seen in this population.

Spatial assessment of femoral neck bone density and microstructure in hip osteoarthritis

Osteoarthritis (OA) is known to involve profound changes in bone density and microstructure near to, and even distal to, the joint. Critically, however, a full, spatial picture of these abnormalities has not been well documented in a quantitative fashion in hip OA. Here, micro-computed tomography (44.8 μm/voxel) and data-driven computational anatomy were used to generate 3-D maps of the distribution of bone density and microstructure in human femoral neck samples with early (6F/4M, mean age = 51.3 years), moderate (14F/8M, mean age = 60 years), and severe (16F/6M, mean age = 63.3 years) radiographic OA. With increasing severity of radiographic OA, there was decreased cortical bone mineral density (BMD) (p=0.003), increased cortical thickness (p=0.001), increased cortical porosity (p=0.0028), and increased cortical cross-sectional area (p=0.0012, due to an increase in periosteal radius (p=0.018)), with no differences detected in the total femoral neck or trabecular compartment measures. No OA-related region-specific differences were detected through Statistical Parametric Mapping, but there were trends towards decreased tissue mineral density (TMD) in the inferior femoral neck with increasing OA severity (0.050 < p ≤ 0.091), possibly due to osteophytes. Overall, the lack of differences in cortical TMD among radiographic OA groups indicated that the decrease in cortical BMD with increasing OA severity was largely due to the increased cortical porosity rather than decreased tissue mineralization. As porosity is inversely associated with stiffness and strength in cortical bone, increased porosity may offset the effect that increased cortical cross-sectional area would be expected to have on reducing stresses within the femoral neck. The use of high-resolution imaging and quantitative spatial assessment in this study provide insight into the heterogeneous and multi-faceted changes in density and microstructure in hip OA, which have implications for OA progression and fracture risk.

Cortical porosity development and progression is mitigated after etelcalcetide treatment in an animal model of chronic kidney disease

PURPOSE

Chronic kidney disease (CKD) leads to increased bone fragility and risk of fracture. Cortical deteriorations, including cortical porosity, are key factors in fracture susceptibility in CKD. Since secondary hyperparathyroidism is common in CKD individuals and contributes to cortical deterioration, we hypothesized that reducing parathyroid hormone (PTH) may modulate CKD-induced cortical porosity. The goal of this pilot study was to assess the effects of lowering PTH, via the preclinical analogue of the FDA-approved calcimimetic etelcalcetide (KP-2326), on the development and progression of cortical pores in the setting of CKD.

METHODS

Male Cy/+ Sprague Dawley rats with clinical biochemistries consistent with CKD (N = 8) were assigned to the study. At 30-32 weeks of age, cortical bone was assessed via In vivo μCT and blood collected for biochemistries to create baseline measures. Calcimimetic treatment with KP-2326 (KP) was then administered 3× weekly for 2-4 weeks. Cortical bone and biochemical parameters were repeated at study endpoint (33-37 wks of age). A group of age- and cohort-matched CKD rats (N = 4) were utilized as untreated controls.

RESULTS

Untreated CKD rats had significantly increased cortical porosity over time, while porosity in KP-treated CKD rats was not significantly changed over time. Individual pore analysis revealed that pore area was significantly higher for expanding pores in untreated CKD rats compared to KP-treated CKD rats. Mechanical properties of KP-treated animal femora were similar to historical values of age-matched CKD animals and lower than those of age-matched non-diseased animals.

CONCLUSION

Our pilot preclinical study demonstrates that etelcalcetide treatment can mitigate the progression of cortical bone changes in an animal model of CKD through suppression of pre-existing cortical pore expansion and limiting the size of new pore development. While stabilization of porosity is beneficial it remains likely that infilling of porosity will be needed to positively affect mechanical properties of bones in the setting of CKD.

Boron Nano-hydroxyapatite Composite Increases the Bone Regeneration of Ovariectomized Rabbit Femurs

Osteoporosis is a systemic metabolic disease defined by a decreased bone mineral density, microarchitectural deterioration, and an increased incidence of fragility fractures that may lead to morbidity and mortality. Boron may stimulate new bone formation and regeneration, when combined with nano-hydroxyapatite. We questioned whether injecting boron-containing nano-hydroxyapatite composites with hyaluronan increased the bone mineral density and new bone formation in osteoporotic rabbit femurs. The regenerative effects of injectable boron-containing nano-hydroxyapatite composites from 6 to 12 weeks, which may prevent osteoporotic femoral fractures, were assessed. Boron-containing (10 μg/ml) nano-hydroxyapatite composites were injected into the intramedullary femoral cavity with hyaluronan. These significantly increased the histomorphometric new bone surface to the total bone surface ratio at 6 and 9 weeks. The micro-tomographic bone volume to the total volume ratio and bone mineral density in osteoporotic rabbit femurs increased when compared to the hyaluronan (p = 0.004, p = 0.004, p = 0.004, p = 0.01, respectively) and the sham-control (p = 0.01, p = 0.004, p = 0.01, p = 0.037, respectively) groups. The boron-containing group had a higher bone mineralization and new bone formation compared to the nano-hydroxyapatite group, although the difference was not statistically significant. These findings reveal that intramedullary injection of boron-containing nano-hydroxyapatite with hyaluronan increases new bone formation and mineralization in ovariectomized rabbit femurs. Boron-containing nano-hydroxyapatite composites are promising tissue engineering biomaterials that may have regenerative potential in preventing primary and/or secondary femoral fractures in osteoporosis patients.

Osteal macrophages support osteoclast-mediated resorption and contribute to bone pathology in a postmenopausal osteoporosis mouse model

Osteal macrophages (osteomacs) support osteoblast function and promote bone anabolism, but their contribution to osteoporosis has not been explored. Although mouse ovariectomy (OVX) models have been repeatedly used, variation in strain, experimental design and assessment modalities have contributed to no single model being confirmed as comprehensively replicating the full gamut of osteoporosis pathological manifestations. We validated an OVX model in adult C3H/HeJ mice and demonstrated that it presents with human postmenopausal osteoporosis features with reduced bone volume in axial and appendicular bone and bone loss in both trabecular and cortical bone including increased cortical porosity. Bone loss was associated with increased osteoclasts on trabecular and endocortical bone and decreased osteoblasts on trabecular bone. Importantly, this OVX model was characterized by delayed fracture healing. Using this validated model, we demonstrated that osteomacs are increased post-OVX on both trabecular and endocortical bone. Dual F4/80 (pan-macrophage marker) and tartrate-resistant acid phosphatase (TRAP) staining revealed osteomacs frequently located near TRAP⁺ osteoclasts and contained TRAP⁺ intracellular vesicles. Using an in vivo inducible macrophage depletion model that does not simultaneously deplete osteoclasts, we observed that osteomac loss was associated with elevated extracellular TRAP in bone marrow interstitium and increased serum TRAP. Using in vitro high-resolution confocal imaging of mixed osteoclast-macrophage cultures on bone substrate, we observed macrophages juxtaposed to osteoclast basolateral functional secretory domains scavenging degraded bone byproducts. These data demonstrate a role for osteomacs in supporting osteoclastic bone resorption through phagocytosis and sequestration of resorption byproducts. Overall, our data expose a novel role for osteomacs in supporting osteoclast function and provide the first evidence of their involvement in osteoporosis pathogenesis. © 2021 American Society for Bone and Mineral Research (ASBMR).

Osteosarcoma mechanobiology and therapeutic targets

Osteosarcoma (OS) is the one of the most common primary tumors of bone with less than a 20% 5-year survival rate after the development of metastases. OS is highly predisposed in Paget's disease (PD) of bone, and both have common characteristic skeletal features due to rapid bone remodeling. OS prognosis is location dependent which further emphasizes the likely contribution of the bone microenvironment in its pathogenesis. Mechanobiology is the phenomenon when mechanical cues from the changing physical microenvironment of bone are transduced to biological pathways through mechanosensitive cellular components. Mechanobiology-driven therapies have been used for curbing tumor progression by direct alteration of the physical microenvironment or inhibition of metastasis-associated mechanosensitive proteins. This review emphasizes the contribution of mechanobiology to OS progression, and sheds light on current mechanobiology-based therapies and potential new targets for improving disease management. Additionally, the variety of 3D models currently used to study OS mechanobiology are summarized.

Bone and non-contractile soft tissue changes following open kinetic chain resistance training and testosterone treatment in spinal cord injury: an exploratory study

Twenty men with spinal cord injury (SCI) were randomized into two 16-week intervention groups receiving testosterone treatment (TT) or TT combined with resistance training (TT + RT). TT + RT appears to hold the potential to reverse or slow down bone loss following SCI if provided over a longer period.

INTRODUCTION

Persons with SCI experience bone loss below the level of injury. The combined effects of resistance training and TT on bone quality following SCI remain unknown.

METHODS

Men with SCI were randomized into 16-week treatments receiving TT or TT + RT. Magnetic resonance imaging (MRI) of the right lower extremity before participation and post-intervention was used to visualize the proximal, middle, and distal femoral shaft, the quadriceps tendon, and the intermuscular fascia of the quadriceps. For the TT + RT group, MRI microarchitecture techniques were utilized to elucidate trabecular changes around the knee. Individual mixed models were used to estimate effect sizes.

RESULTS

Twenty participants completed the pilot trial. A small effect for yellow marrow in the distal femur was indicated as increases following TT and decreases following TT + RT were observed. Another small effect was observed as the TT + RT group displayed greater increases in intermuscular fascia length than the TT arm. Distal femur trabecular changes for the TT + RT group were generally small in effect (decreased trabecular thickness variability, spacing, and spacing variability; increased network area). Medium effects were generally observed in the proximal tibia (increased plate width, trabecular thickness, and network area; decreased trabecular spacing and spacing variability).

CONCLUSIONS

This pilot suggests longer TT + RT interventions may be a viable rehabilitation technique to combat bone loss following SCI.

CLINICAL TRIAL REGISTRATION

Registered with clinicaltrials.gov : NCT01652040 (07/27/2012).

Cortical Bone Mechanical Assessment via Free Water Relaxometry at 3 T

BACKGROUND

Investigation of cortical bone using magnetic resonance imaging is a developing field, which uses short/ultrashort echo time (TE) pulse sequences to quantify bone water content and to obtain indirect information about bone microstructure.

PURPOSE

To improve the accuracy of the previously proposed technique of free water T₁ quantification and to seek the relationship between cortical bone free water T₁ and its mechanical competence.

STUDY TYPE

Prospective.

SUBJECTS

Twenty samples of bovine tibia bone.

FIELD STRENGTH/SEQUENCES

3.0 T; ultra-fast two-dimensional gradient echo, Radio frequency-spoiled three-dimensional gradient echo.

ASSESSMENT

Cortical bone free water T₁ was quantified via three different methods: inversion recovery (IR), variable flip angle (VFA), and variable repetition time (VTR). Signal-to-noise ratio was measured by dividing the signal of each segmented sample to background noise. Segmentation was done manually. The effect of noise on T₁ quantification was evaluated. Then, the samples were subjected to mechanical compression test to measure the toughness, yield stress, ultimate stress, and Young modulus.

STATISTICAL TESTS

All the statistical analysis (Shapiro-Wilk, way analysis of variance, paired t test, Pearson correlation, and Bland-Altman plot) were done using SPSS.

RESULTS

Significant difference was found between T₁ quantification groups (P < 0.05). Average T₁ of each quantification method differed significantly after adding noise (P < 0.05). VFA-T₁ values significantly correlated with toughness (r = -0.68, P < 0.05), ultimate stress (r = -0.71, P < 0.05), and yield stress (r = -0.62, P < 0.05). No significant correlation was found between VTR-T₁ values and toughness (P = 0.07), ultimate stress (P = 0.47), yield stress (P = 0.30), and Young modulus (P = 0.39).

DATA CONCLUSION

Pore water T₁ value is associated with bone mechanical competence, and VFA method employing short-TE pulse sequence seems a superior technique to VTR method for this quantification.

LEVEL OF EVIDENCE

2 TECHNICAL EFFICACY: 1.

Cortical and trabecular bone structure of the hominoid capitate

Morphological variation in the hominoid capitate has been linked to differences in habitual locomotor activity due to its importance in movement and load transfer at the midcarpal joint proximally and carpometacarpal joints distally. Although the shape of bones and their articulations are linked to joint mobility, the internal structure of bones has been shown experimentally to reflect, at least in part, the loading direction and magnitude experienced by the bone. To date, it is uncertain whether locomotor differences among hominoids are reflected in the bone microarchitecture of the capitate. Here, we apply a whole‐bone methodology to quantify the cortical and trabecular architecture (separately and combined) of the capitate across bipedal (modern Homo sapiens), knuckle‐walking (Pan paniscus, Pan troglodytes, Gorilla sp.), and suspensory (Pongo sp.) hominoids (n = 69). It is hypothesized that variation in bone microarchitecture will differentiate these locomotor groups, reflecting differences in habitual postures and presumed loading force and direction. Additionally, it is hypothesized that trabecular and cortical architecture in the proximal and distal regions, as a result of being part of mechanically divergent joints proximally and distally, will differ across these portions of the capitate. Results indicate that the capitate of knuckle‐walking and suspensory hominoids is differentiated from bipedal Homo primarily by significantly thicker distal cortical bone. Knuckle‐walking taxa are further differentiated from suspensory and bipedal taxa by more isotropic trabeculae in the proximal capitate. An allometric analysis indicates that size is not a significant determinate of bone variation across hominoids, although sexual dimorphism may influence some parameters within Gorilla. Results suggest that internal trabecular and cortical bone is subjected to different forces and functional adaptation responses across the capitate (and possibly other short bones). Additionally, while separating trabecular and cortical bone is normal protocol of current whole‐bone methodologies, this study shows that when applied to carpals, removing or studying the cortical bone separately potentially obfuscates functionally relevant signals in bone structure.

Cortical Bone Modifications after Radiotherapy: Cortex Porosity and Osteonal Changes Evaluated Over Time

Aiming to evaluate cortical bone microarchitecture and osteonal morphology after irradiation, twelve male New Zealand rabbits were used. The animals were divided: control group (no radiation-NIr); and 3 irradiated groups, sacrificed after: 7 (Ir7d); 14 (Ir14d) and 21 (Ir21d) days. A single radiation dose of 30 Gy was used. Computed microtomography analyzed the cortical microarchitecture: cortical thickness (CtTh), bone volume (BV), total porosity (Ct.Po), intracortical porosity (CtPo-cl), channel/pore number (Po.N), fractal dimension (FD) and degree of anisotropy (Ct.DA). After scan, osteonal morphology was histologically assessed by means: area and perimeter of the osteons (O.Ar; O.p) and of the Haversian canals (C.Ar; C.p). Microtomographic analysis were performed by ANOVA, followed by Tukey and Dunnet tests. Osteon morphology analyses were performed by Kruskal-Wallis, and test Dunn's. Cortical thickness was significant difference (p<0.010) between the NIr and irradiated groups, with thicker cortex at Ir7d (1.15±0.09). The intracortical porosity revealed significant difference (p<0.001) between irradiated groups and NIr, with lower value for Ir7d (0.29±0.09). Bone volume was lower in Ir14d compared to control. Area and perimeter of the osteons were statistically different (p<0.0001) between NIr and Ir7d. Haversian canals also revealed lower values (p<0.0001) in Ir7d (80.57±9.3; 31.63±6.5) compared to NIr and irradiated groups. Cortical microarchitecture was affected by radiation, and the effects appear to be time-dependent, mostly regarding the osteons morphology at the initial days. Cortex structure in Ir21d revealed similarities to control suggesting that microarchitecture resembles normal condition after a period.

Mimicking bone microenvironment: 2D and 3D in vitro models of human osteoblasts

Understanding the in vitro biology and behavior of human osteoblasts is crucial for developing research models that reproduce closely the bone structure, its functions, and the cell-cell and cell-matrix interactions that occurs in vivo. Mimicking bone microenvironment is challenging, but necessary, to ensure the clinical translation of novel medicines to treat more reliable different bone pathologies. Currently, bone tissue engineering is moving from 2D cell culture models such as traditional culture, sandwich culture, micro-patterning, and altered substrate stiffness, towards more complex 3D models including spheroids, scaffolds, cell sheets, hydrogels, bioreactors, and microfluidics chips. There are many different factors, such cell line type, cell culture media, substrate roughness and stiffness that need consideration when developing in vitro models as they affect significantly the microenvironment and hence, the final outcome of the in vitro assay. Advanced technologies, such as 3D bioprinting and microfluidics, have allowed the development of more complex structures, bridging the gap between in vitro and in vivo models. In this review, past and current 2D and 3D in vitro models for human osteoblasts will be described in detail, highlighting the culture conditions and outcomes achieved, as well as the challenges and limitations of each model, offering a widen perspective on how these models can closely mimic the bone microenvironment and for which applications have shown more successful results.

Estimation of Cortical Bone Microstructure From Ultrasound Backscatter

Multichannel pulse-echo ultrasound using linear arrays and single-channel data acquisition systems opens new perspectives for the evaluation of cortical bone. In combination with spectral backscatter analysis, it can provide quantitative information about cortical microstructural properties. We present a numerical study, based on the finite-difference time-domain method, to estimate the backscatter cross section of randomly distributed circular pores in a bone matrix. A model that predicts the backscatter coefficient using arbitrary pore diameter distributions was derived. In an ex vivo study on 19 human tibia bones (six males, 13 females, 83.7 ± 8.4 years), multidirectional ultrasound backscatter measurements were performed using an ultrasound scanner equipped with a 6-MHz 128-element linear array with sweep motor control. A normalized depth-dependent spectral analysis was performed to derive backscatter and attenuation coefficients. Site-matched reference values of tissue acoustic impedance Z , cortical thickness (Ct.Th), pore density (Ct.Po.Dn), porosity (Ct.Po), and characteristic parameters of the pore diameter (Ct.Po.Dm) distribution were obtained from 100-MHz scanning-acoustic microscopy images. Proximal femur areal bone mineral density (aBMD), stiffness S , and ultimate force Fu from the same donors were available from a previous study. All pore structure and material properties could be predicted using linear combinations of backscatter parameters with a median to high accuracy (0.28 ≤ adjusted R² ≤ 0.59). The combination of cortical thickness and backscatter parameter provided similar or better prediction accuracies than aBMD. For the first time, a method for the noninvasive assessment of the pore diameter distribution in cortical bone by ultrasound is proposed. The combined assessment of cortical thickness, sound velocity, and pore size distribution in a mobile, nonionizing measurement system could have a major impact on preventing osteoporotic fractures.

Longitudinal Evolution of Bone Microarchitecture and Bone Strength in Type 2 Diabetic Postmenopausal Women With and Without History of Fragility Fractures-A 5-Year Follow-Up Study Using High Resolution Peripheral Quantitative Computed Tomography

Introduction

Diabetic bone disease is characterized by an increased fracture risk which may be partly attributed to deficits in cortical bone quality such as higher cortical porosity. However, the temporal evolution of bone microarchitecture, strength, and particularly of cortical porosity in diabetic bone disease is still unknown. Here, we aimed to prospectively characterize the 5-year changes in bone microarchitecture, strength, and cortical porosity in type 2 diabetic (T2D) postmenopausal women with (DMFx) and without history of fragility fractures (DM) and to compare those to nondiabetic fracture free controls (Co) using high resolution peripheral quantitative computed tomography (HR-pQCT).

Methods

Thirty-two women underwent baseline HR-pQCT scanning of the ultradistal tibia and radius and a FU-scan 5 years later. Bone microarchitectural parameters, including cortical porosity, and bone strength estimates via µFEA were calculated for each timepoint and annualized. Linear regression models (adjusted for race and change in BMI) were used to compare the annualized percent changes in microarchitectural parameters between groups.

Results

At baseline at the tibia, DMFx subjects exhibited the highest porosity of the three groups (66.3% greater Ct.Po, 71.9% higher Ct.Po.Volume than DM subjects, p < 0.022). Longitudinally, porosity increased significantly over time in all three groups and at similar annual rates, while DMFx exhibited the greatest annual decreases in bone strength indices (compared to DM 4.7× and 6.7× greater decreases in failure load [F] and stiffness [K], p < 0.025; compared to Co 14.1× and 22.2× greater decreases in F and K, p < 0.020).

Conclusion

Our data suggest that despite different baseline levels in cortical porosity, T2D women with and without fractures experienced long-term porosity increases at a rate similar to non-diabetics. However, the annual loss in bone strength was greatest in T2D women with a history of a fragility fractures. This suggests a potentially non-linear course of cortical porosity development in T2D bone disease: major porosity may develop early in the course of disease, followed by a smaller steady annual increase in porosity which in turn can still have a detrimental effect on bone strength-depending on the amount of early cortical pre-damage.

Exosome-guided bone targeted delivery of Antagomir-188 as an anabolic therapy for bone loss

The differentiation shift from osteogenesis to adipogenesis of bone marrow mesenchymal stem cells (BMSCs) characterizes many pathological bone loss conditions. Stromal cell-derived factor-1 (SDF1) is highly enriched in the bone marrow for C-X-C motif chemokine receptor 4 (CXCR4)-positive hematopoietic stem cell (HSC) homing and tumor bone metastasis. In this study, we displayed CXCR4 on the surface of exosomes derived from genetically engineered NIH-3T3 cells. CXCR4⁺ exosomes selectively accumulated in the bone marrow. Then, we fused CXCR4⁺ exosomes with liposomes carrying antagomir-188 to produce hybrid nanoparticles (NPs). The hybrid NPs specifically gathered in the bone marrow and released antagomir-188, which promoted osteogenesis and inhibited adipogenesis of BMSCs and thereby reversed age-related trabecular bone loss and decreased cortical bone porosity in mice. Taken together, this study presents a novel way to obtain bone-targeted exosomes via surface display of CXCR4 and a promising anabolic therapeutic approach for age-related bone loss.

•

Surface display of CXCR4 grants exosomes bone targeting properties.

•

Exosome-liposome hybrid nanoparticles carrying nucleic acid target bone.

•

Antagomir-188 loaded hybrid nanoparticles regulate MSC differentiation in aged mice.

Icariin ameliorates estrogen-deficiency induced bone loss by enhancing IGF-I signaling via its crosstalk with non-genomic ERα signaling

BACKGROUND

Rapid, non-genomic estrogen receptor (ER) signaling plays an integral role in mediating the tissue selective properties of ER modulators. Icariin, a bone bioactive flavonoid, has been reported to selectively activate non-genomic ERα signaling in in vitro and in vivo studies.

PURPOSE

The mechanisms underlying the estrogen-like bone protective effects of icariin are not fully understood, especially those that are related to insulin-like growth factor I (IGF-1) signaling. The bone protective effects of icariin were investigated in female mature ovariectomized (OVX) rats and the signaling of IGF-IR- ERα cross-talk was determined in osteoblastic cells.

STUDY DESIGN AND METHODS

Icariin at 3 different dosages (50, 500 and 3000 ppm) were orally administrated to rats for 3 months through daily intake of phytoestrogen-free animal diets containing icariin. Bone marrow stromal cells (BMSCs) and osteoclast precursors from femurs were harvested for experiments and RNA-sequencing. The interactions between IGF-IR and non-genomic ERα signaling were examined in pre-osteoblastic MC3T3-E1 cells and mature osteoblasts differentiated from BMSCs.

RESULTS

Our results show that chronic administration of icariin to OVX rats significantly protected them against bone loss at the long bone and lumbar spine without inducing any uterotrophic effects. Ex vivo studies using BMSCs and osteoclast precursors confirmed the stimulatory effects of icariin on osteoblastogenesis and its inhibitory effects on osteoclastogenesis, respectively. RNA-sequencing analysis of mRNA from BMSCs revealed that icariin at 500 ppm significantly altered IGF-1 signaling as well as PI3K-Akt pathways. Our results demonstrated for the first time the rapid induction of interactions between IGF-IR and ERα as well as IGF-IR signaling and the downstream Akt phosphorylation by icariin in MC3T3-E1 cells. The activation of ERα and Akt phosphorylation by icariin in MC3T3-E1 cells and the osteogenic effects of icariin on ALP activity in mature osteoblasts were shown to be IGF-IR-dependent.

CONCLUSION

Our findings reveal that icariin activates both ERα and Akt via enhancing rapid induction of IGF-1 signaling in osteoblastic cells for osteogenesis and might be regarded as a novel pathway-selective phytoestrogen for management of postmenopausal osteoporosis.

Intra-skeletal vascular density in a bipedal hopping macropod with implications for analyses of rib histology

Human ribs are thought to be less affected by mechanical strain at the microscopic level than limb bones, implying that rib remodelling better reflects bone physiological homeostasis. Here, we test the hypothesis that rib tissue will be well vascularized and thus enhance susceptibility to metabolic influence. An intra-skeletal comparison of bone vascular canal density was conducted using a macropod animal model adapted to bipedal habitual hopping. The right humerus, ulna, radius, femur, tibia, fibula, a mid-thoracic and upper-thoracic rib of an eastern grey kangaroo (Macropus giganteus) were sectioned at the midshaft, from which histological sections were prepared. Bone vascularity from a maximum of 12 mm² of sub-periosteal parallel-fibred and lamellar bone was recorded, resulting in a total of 2047 counted vessels. Vascular canal density data were corrected by cortical width, maximum length, and midshaft circumference robusticity indices computed for each bone. The fibula consistently had the highest vascular canal density, even when corrected for maximum length, cortical width and midshaft circumference robusticities. This was followed by the mid- and upper-thoracic ribs. Vascularity differences between bones were relatively consistent whether vascular canal density was controlled for by cortical width or midshaft circumference robusticities. Vascular canal density and robusticity indices were also positively and negatively correlated (p < 0.05). Results confirm that the ribs are well vascularized, which facilitates bone metabolic processes such as remodelling, but the fibula also appears to be a well vascularized bone. Future research investigating human bone metabolism will benefit from examining thoracic rib or fibula samples.

Micromechanical evaluation of cortical bone using in situ XCT indentation and digital volume correlation

The overall mechanical behaviour of cortical bone is strongly dependant on its microstructure. X-ray computed tomography (XCT) has been widely used to identify the microstructural morphology of cortical tissue (i.e. pore network, Haversian and Volkmann's canals). However, the connection between microstructure and mechanics of cortical bone during plastic deformation is unclear. Hence, the purpose of this study is to provide an in-depth evaluation of the interplay of plastic strain building up in relation to changes in the canal network for cortical bone tissue. In situ step-wise XCT indentation was used to introduce a localised load on the surface of the tissue and digital volume correlation (DVC) was employed to assess the three-dimensional (3D) full-field plastic strain distribution in proximity of the indent. It was observed that regions adjacent to the imprint were under tensile strain, whereas the volume underneath experienced compressive strain. Canal loss and disruption was detected in regions of higher compressive strains exceeding -20000 με and crack formation occurred in specimens where Haversian canals were running parallel to the indentation tip. The results of this study outline the relationship between the micromechanical and structural behaviour of cortical bone during plastic deformation, providing information on cortical tissue fracture pathways.

CKD Stages, Bone Metabolism Markers, and Cortical Porosity Index: Associations and Mediation Effects Analysis

Chronic kidney disease (CKD) has a significant negative impact on bone health. However, the mechanisms of cortical bone deterioration and cortical porosity enlargement caused by CKD have not been fully described. We therefore examined the association of CKD stages with cortical porosity index (PI), and explored potential mediators of this association. Double-echo ultrashort echo-time magnetic resonance imaging (UTE MRI) provides the possibility of quantifying cortical porosity in vivo. A total of 95 patients with CKD stages 2-5 underwent 3D double-echo UTE-Cones MRI (3.0T) of the midshaft tibia to obtain the PI. PI was defined as the ratio of the image signal intensity of a sufficiently long echo time (TE) to the shortest achievable TE. Parathyroid hormone (PTH), β-CrossLaps (β-CTX), total procollagen type I amino-terminal propeptide (T-P1NP), osteocalcin (OC), 25-hydroxyvitamin D (25OHD), and lumbar bone mineral density (BMD) were measured within one week of the MRI. Partial correlation analysis was performed to address associations between PI, eGFR and potential mediators (PTH, β-CTX, T-P1NP, OC, 25OHD, BMD, and T-score). Multiple linear regression models were used to assess the association between CKD stages and PI value. Then, a separate exploratory mediation analysis was carried out to explore the impact of CKD stages and mediators on the PI value. The increasing CKD stages were associated with a higher PI value (P_trend < 0.001). The association of CKD stages and PI mediated 34.4% and 30.8% of the total effect by increased PTH and β-CTX, respectively. Our study provides a new idea to monitor bone health in patients with CKD, and reveals the internal mechanism of bone deterioration caused by CKD to some extent.

Combining polarized Raman spectroscopy and micropillar compression to study microscale structure-property relationships in mineralized tissues

Bone is a natural composite possessing outstanding mechanical properties combined with a lightweight design. The key feature contributing to this unusual combination of properties is the bone hierarchical organization ranging from the nano- to the macro-scale. Bone anisotropic mechanical properties from two orthogonal planes (along and perpendicular to the main bone axis) have already been widely studied. In this work, we demonstrate the dependence of the microscale compressive mechanical properties on the angle between loading direction and the mineralized collagen fibril orientation in the range between 0° and 82°. For this, we calibrated polarized Raman spectroscopy for quantitative collagen fibril orientation determination and validated the method using widely used techniques (small angle X-ray scattering, micro-computed tomography). We then performed compression tests on bovine cortical bone micropillars with known mineralized collagen fibril angles. A strong dependence of the compressive micromechanical properties of bone on the fibril orientation was found with a high degree of anisotropy for both the elastic modulus (E_a/E_t=3.80) and the yield stress (σ_a^y/σ_t^y=2.54). Moreover, the post-yield behavior was found to depend on the MCF orientation with a transition between softening to hardening behavior at approximately 50°. The combination of methods described in this work allows to reliably determine structure-property relationships of bone at the microscale, which may be used as a measure of bone quality.

A Narrative Review of Metatarsal Bone Stress Injury in Athletic Populations: Etiology, Biomechanics, and Management

Metatarsal bone stress injuries (BSIs) are common in athletic populations. BSIs are overuse injuries that result from an accumulation of microdamage that exceeds bone remodeling. Risk for metatarsal BSI is multifactorial and includes factors related to anatomy, biology, and biomechanics. In this article, anatomic factors including foot type, metatarsal length, bone density, bone geometry, and intrinsic muscle strength, which each influence how the foot responds to load, are discussed. Biologic factors such as low energy availability and impaired bone metabolism influence the quality of the bone. Finally, the influence of biomechanical loads to bone such as peak forces, load rates, and loading cycles are reviewed. General management of metatarsal BSI is discussed, including acute care, rehabilitation, treatment of refractory metatarsal BSI, and evaluation of healing/return to sport. Finally, we identify future research priorities and emerging treatments for metatarsal BSI.

Cortical Bone Porosity in Rabbit Models of Osteoporosis

Cortical bone porosity is intimately linked with remodeling, is of growing clinical interest, and is increasingly accessible by imaging. Thus, the potential of animal models of osteoporosis (OP) to provide a platform for studying how porosity develops and responds to interventions is tremendous. To date, rabbit models of OP have largely focused on trabecular microarchitecture or bone density; some such as ovariectomy (OVX) have uncertain efficacy and cortical porosity has not been extensively reported. Our primary objective was to characterize tibial cortical porosity in rabbit-based models of OP, including OVX, glucocorticoids (GC), and OVX + GC relative to controls (SHAM). We sought to: (i) test the hypothesis that intracortical remodeling is elevated in these models; (ii) contrast cortical remodeling and porosity in these models with that induced by parathyroid hormone (1-34; PTH); and (iii) contrast trabecular morphology in the proximal tibia across all groups. Evidence that an increase in cortical porosity occurred in all groups was observed, although this was the least robust for GC. Histomorphometric measures supported the hypothesis that remodeling rate was elevated in all groups and also revealed evidence of uncoupling of bone resorption and formation in the GC and OVX + GC groups. For trabecular bone, a pattern of loss was observed for OVX, GC, and OVX + GC groups, whereas the opposite was observed for PTH. Change in trabecular number best explained these patterns. Taken together, the findings indicated rabbit models provide a viable and varied platform for the study of OP and associated changes in cortical remodeling and porosity. Intriguingly, the evidence revealed differing effects on the cortical and trabecular envelopes for the PTH model. © 2020 The Authors. Journal of Bone and Mineral Research published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research (ASBMR)..

Spherical depth-sensing nanoindentation of human anterior skull base bones: Establishment of a test protocol

The mechanical properties of anterior skull base (ASB) bones are not well understood due to their complex geometry and deep location. However, it is of particular interest for skull base surgeons to appraise the force range they can apply during procedures and know what kind of haptic feedback a simulation device should produce in order to be realistic for trainees. The aim of this study was to establish a measurement protocol to set the level of hydration state, temperature and curve analysis method for spherical depth sensing nanoindentation of ASB bones. A definitive screening design method was used to test the different possible combinations of these factors. Two samples of ASB bones from the heads of two human body donors (two specimens) were selected according to their microstructure as assessed by micro-CT (microtomography): low-porosity (16.87%, sphenoid bone) and high-porosity (79.85%, ethmoid bone). Depth measurement series of 36 nanoindentations (n = 288) were performed on specimen 1 according to the L8 Taguchi orthogonal array to study the effect of temperature (two levels: 20 or 37 °C), hydration state (dry or immerged in physiological saline sodium chloride), and loading curve analysis according to the Hertzian contact theory (fitting at the start or at the end). The mean values of reduced Young's (E*) modulus varied significantly depending on the hydration status and bone microstructure. In order to obtain the physiological properties of ASB bones, we thus propose performing immersion tests. To simplify the experimentation protocol, future experiments must include a room temperature level and a fit of the curve at the end of the load. A validation series was performed on the second specimen to assess the set of parameters. The E* in dry bone gave mean values of 994.68 MPa, versus 409.79 MPa in immerged bones (p < 0.00001). This is the first time a study has been carried out on ASB bones, defining the experimental parameters related to physiological conditions.

A microRNA Approach to Discriminate Cortical Low Bone Turnover in Renal Osteodystrophy

A main obstacle to diagnose and manage renal osteodystrophy (ROD) is the identification of intracortical bone turnover type (low, normal, high). The gold standard, tetracycline‐labeled transiliac crest bone biopsy, is impractical to obtain in most patients. The Kidney Disease Improving Global Outcomes Guidelines recommend PTH and bone‐specific alkaline phosphatase (BSAP) for the diagnosis of turnover type. However, PTH and BSAP have insufficient diagnostic accuracy to differentiate low from non‐low turnover and were validated for trabecular turnover. We hypothesized that four circulating microRNAs (miRNAs) that regulate osteoblast (miRNA‐30b, 30c, 125b) and osteoclast development (miRNA‐155) would provide superior discrimination of low from non‐low turnover than biomarkers in clinical use. In 23 patients with CKD 3‐5D, we obtained tetracycline‐labeled transiliac crest bone biopsy and measured circulating levels of intact PTH, BSAP, and miRNA‐30b, 30c, 125b, and 155. Spearman correlations assessed relationships between miRNAs and histomorphometry and PTH and BSAP. Diagnostic test characteristics for discriminating low from non‐low intracortical turnover were determined by receiver operator curve analysis; areas under the curve (AUC) were compared by χ² test. In CKD rat models of low and high turnover ROD, we performed histomorphometry and determined the expression of bone tissue miRNAs. Circulating miRNAs moderately correlated with bone formation rate and adjusted apposition rate at the endo‐ and intracortical envelopes (ρ = 0.43 to 0.51; p < 0.05). Discrimination of low versus non‐low turnover was 0.866, 0.813, 0.813, and 0.723 for miRNA‐30b, 30c, 125b, and 155, respectively, and 0.509 and 0.589 for PTH and BSAP, respectively. For all four miRNAs combined, the AUC was 0.929, which was superior to that of PTH and BSAP alone and together (p < 0.05). In CKD rats, bone tissue levels of the four miRNAs reflected the findings in human serum. These data suggest that a panel of circulating miRNAs provide accurate noninvasive identification of bone turnover in ROD. © 2020 The Authors. JBMR Plus published by Wiley Periodicals, Inc. on behalf of American Society for Bone and Mineral Research.

Homogenization of cortical bone reveals that the organization and shape of pores marginally affect elasticity

With ageing and various diseases, the vascular pore volume fraction (porosity) in cortical bone increases, and the morphology of the pore network is altered. Cortical bone elasticity is known to decrease with increasing porosity, but the effect of the microstructure is largely unknown, while it has been thoroughly studied for trabecular bone. Also, popular micromechanical models have disregarded several micro-architectural features, idealizing pores as cylinders aligned with the axis of the diaphysis. The aim of this paper is to quantify the relative effects on cortical bone anisotropic elasticity of porosity and other descriptors of the pore network micro-architecture associated with pore number, size and shape. The five stiffness constants of bone assumed to be a transversely isotropic material were measured with resonant ultrasound spectroscopy in 55 specimens from the femoral diaphysis of 29 donors. The pore network, imaged with synchrotron radiation X-ray micro-computed tomography, was used to derive the pore descriptors and to build a homogenization model using the fast Fourier transform (FFT) method. The model was calibrated using experimental elasticity. A detailed analysis of the computed effective elasticity revealed in particular that porosity explains most of the variations of the five stiffness constants and that the effects of other micro-architectural features are small compared to usual experimental errors. We also have evidence that modelling the pore network as an ensemble of cylinders yields biased elasticity values compared to predictions based on the real micro-architecture. The FFT homogenization method is shown to be particularly efficient to model cortical bone.

The generation of enlarged eroded pores upon existing intracortical canals is a major contributor to endocortical trabecularization

The gradual conversion of cortical bone into trabecular bone on the endocortical surface contributes substantially to thinning of the cortical bone. The purpose of the present study was to characterize the intracortical canals (3D) and pores (2D) in human fibular bone, to identify the intracortical remodeling events leading to this endocortical trabecularization. The analysis was conducted in fibular diaphyseal bone specimens obtained from 20 patients (6 women and 14 men, age range 41-75 years). μCT revealed that endosteal bone had a higher cortical porosity (p< 0.05) and canals with a larger diameter (p< 0.05) than periosteal bone, while the canal spacing and number were similar in the endosteal and periosteal half. Histological analysis showed that the endosteal half versus the periosteal half: (i) had a higher likelihood of being non-quiescent type 2 pores (i.e. remodeling of existing pores) than other pore types (OR = 1.6, p< 0.01); (ii) that the non-quiescent type 2 pores contributed to a higher porosity (p< 0.001); and that (iii) amongst these pores especially eroded type 2 pores contributed to the elevated cortical porosity (p< 0.001). In conclusion, we propose that endocortical trabecularization results from the accumulation of eroded cavities upon existing intracortical canals, favored by delayed initiation of bone formation.