LUMiC® Endoprosthetic Reconstruction After Periacetabular Tumor Resection: Short-term Results

Outcomes Following Pedestal Cup Reconstruction of (Impending) Pathological Fractures of the Acetabulum due to Metastatic Bone Disease

Management of periacetabular metastatic bone disease (MBD) is challenging, specifically if associated with bone loss or fracture. The aim of this study was to evaluate the complications and outcomes after undergoing peri-acetabular reconstruction using an 'ice-cream cone' pedestal cup endoprostheses for the most severe cases of (impending) pathological acetabular fractures. Fifty cases with severe periacetabular disease were identified. Acetabular defects were classified using the Metastatic Acetabular Classification (MAC). Pre- and post-operative mobility was assessed using the Eastern Cooperative Oncology Group (ECOG) Performance Status. Pain levels were assessed using a verbal rating scale. Surgical complications and patient survival were analysed; the Prognostic Immune Nutritional Index (PINI) was applied retrospectively to survival. There were 32 females and 18 males with a median age of 65 (41-88). Median post-operative follow-up was 16 months (IQR 5.5-28.5 months). Thirty-nine had complete, and 11, impending pathological fractures. The observed five-year survival was 19%, with a median survival of 16 months (IQR 5.8-42.5 months). Significantly worse survival was observed with PINI scores < 3.0 (p = 0.003). Excluding three perioperative deaths, 13 complications occurred in 12 patients: Implant failure in six patients (four aseptic loosening, one dislocation and one infection). At the final follow-up, mobility and pain levels were improved in 85% and 100%, respectively. Reconstruction of significant pelvic MBD with the 'ice-cream cone' reduces pain and improves mobility. Whilst the mortality rate is high, it remains a reasonable option for bed-bound, immobile patients. We advocate the use of an 'ice-cream cone' prosthesis for selected patients balancing the reported risks with the observed benefits.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13193-024-01917-x.

LUMiC Endoprosthetic Reconstruction of Periacetabular Tumor Defects: A Multicenter Follow-up Study

BACKGROUND

We previously reported promising early results for periacetabular tumor reconstructions using the LUMiC prosthesis. The current study evaluates mid-term complications, revision rates, cumulative incidence of implant revision, and risk factors for complications in a multicenter cohort.

METHODS

We assessed patients in whom a tumor defect after type P1b+2, P2, P2+3, or P1b+2+3 internal hemipelvectomy was reconstructed with a LUMiC prosthesis during the period of 2008 to 2022. Complications were reported according to the Henderson classification. Competing risks models were used to estimate the cumulative incidence of implant revision for mechanical and nonmechanical reasons, and reoperations for any complication. Cox models were used to study the effect of risk factors on dislocation and infection.

RESULTS

One hundred and sixty-six patients (median follow-up, 4.2 years [interquartile range, 2.6 to 7.6 years]) were included. A total of 114 (69%) were treated for a primary malignant tumor, 46 (28%) for metastatic carcinoma, 5 (3%) for a benign aggressive lesion, and 1 (1%) for another reason. One hundred and sixty-five reoperations were performed in 82 (49%) of the patients; 104 (63%) of the reoperations were within 6 months. Thirty-two (19%) of 166 implants were revised: 13 (8%) for mechanical reasons, mainly dislocation (n = 5, 3%), and 19 (11%) for nonmechanical reasons, mainly periprosthetic joint infection (PJI) (n = 15, 9%). The cumulative incidences of revision for mechanical reasons and PJI (Henderson 1 to 4) at 2, 5, and 10 years were 11% (95% confidence interval [CI], 7% to 17%), 18% (12% to 25%), and 24% (16% to 33%), respectively. Previous surgery at the same site was associated with an increased dislocation risk (cause-specific hazard ratio [HRCS], 3.0 [95% CI, 1.5 to 6.4]; p < 0.01), and resections involving the P3 region were associated with an increased infection risk (HRCS, 2.5 [95% CI, 1.4 to 4.7]; p < 0.01).

CONCLUSIONS

Despite a substantial reoperation risk, the LUMiC prosthesis demonstrated its durability in the mid-term, with a low mechanical revision rate and most patients retaining their primary implant. Most complications occur in the first postoperative months. Patients with previous surgery at the same site had an increased dislocation risk and might benefit from more conservative rehabilitation and aftercare. Measures should be aimed at reducing the PJI risk, especially in resections involving the P3 region.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

3D-Printed custom-made hemipelvic endoprosthetic reconstruction following periacetabular tumor resection: utilizing a novel classification system

BACKGROUND

Customized 3D-printed pelvic implants with a porous structure have revolutionized periacetabular pelvic defect reconstruction after tumor resection, offering improved osteointegration, long-term stability, and anatomical fit. However, the lack of an established classification system hampers implementation and progress.

METHODS

We formulated a novel classification system based on pelvic defect morphology and 3D-printed hemipelvis endoprostheses. It integrates surgical approach, osteotomy guide plate and prosthesis design, postoperative rehabilitation plans, and perioperative processes.

RESULTS

Retrospectively analyzing 60 patients (31 males, 29 females), we classified them into Type A (15 patients: Aa = 6, Ab = 9), Type B (27 patients: Ba = 15, Bb = 12), Type C (17 patients). All underwent customized osteotomy guide plate-assisted tumor resection and 3D-printed hemipelvic endoprosthesis reconstruction. Follow-up duration was median 36.5 ± 15.0 months (range, 6 to 74 months). The mean operating time was 430.0 ± 106.7 min, intraoperative blood loss 2018.3 ± 1305.6 ml, transfusion volume 2510.0 ± 1778.1 ml. Complications occurred in 13 patients (21.7%), including poor wound healing (10.0%), deep prosthesis infection (6.7%), hip dislocation (3.3%), screw fracture (1.7%), and interface loosening (1.7%). VAS score improved from 5.5 ± 1.4 to 1.7 ± 1.3, MSTS-93 score from 14.8 ± 2.5 to 23.0 ± 5.6. Implant osseointegration success rate was 98.5% (128/130), with one Type Ba patient experiencing distal prosthesis loosening.

CONCLUSION

The West China classification may supplement the Enneking and Dunham classification, enhancing interdisciplinary communication and surgical outcomes. However, further validation and wider adoption are required to confirm clinical effectiveness.

Biomechanical and clinical outcomes of 3D-printed versus modular hemipelvic prostheses for limb-salvage reconstruction following periacetabular tumor resection: a mid-term retrospective cohort study

BACKGROUND

Debates persist over optimal pelvic girdle reconstruction after acetabular tumor resection, with surgeons grappling between modular and 3D-printed hemipelvic endoprostheses. We hypothesize superior outcomes with 3D-printed versions, yet scarce comparative research exists. This study fills the gap, examining biomechanics and clinical results retrospectively.

METHODS

From February 2017 to June 2021, we retrospectively assessed 32 patients undergoing en bloc resection for malignant periacetabular tumors at a single institution.

PRIMARY OUTCOME

limb function.

SECONDARY OUTCOMES

implant precision, hip joint rotation center restoration, prosthesis-bone osteointegration, and complications. Biomechanical characteristics were evaluated through finite element analysis on pelvic defect models.

RESULTS

In the 3D-printed group, stress distribution mirrored a normal pelvis, contrasting the modular group with elevated overall stress, unstable transitions, and higher stress peaks. The 3D-printed group exhibited superior functional scores (MSTS: 24.3 ± 1.8 vs. 21.8 ± 2.0, p < 0.05; HHS: 79.8 ± 5.2 vs. 75.3 ± 3.5, p < 0.05). Prosthetic-bone interface osteointegration, measured by T-SMART, favored 3D-printed prostheses, but surgery time (426.2 ± 67.0 vs. 301.7 ± 48.6 min, p < 0.05) and blood loss (2121.1 ± 686.8 vs. 1600.0 ± 505.0 ml, p < 0.05) were higher.

CONCLUSIONS

The 3D-printed hemipelvic endoprosthesis offers precise pelvic ring defect matching, superior stress transmission, and function compared to modular endoprostheses. However, complexity, fabrication expertise, and challenging surgical implantation result in prolonged operation times and increased blood loss. A nuanced consideration of functional outcomes, complexity, and patient conditions is crucial for informed treatment decisions.

LEVEL OF EVIDENCE

Level III, therapeutic study (Retrospective comparative study).

High accuracy of positioning custom triflange acetabular components in tumour and total hip arthroplasty revision surgery

Aims

Custom triflange acetabular components (CTACs) play an important role in reconstructive orthopaedic surgery, particularly in revision total hip arthroplasty (rTHA) and pelvic tumour resection procedures. Accurate CTAC positioning is essential to successful surgical outcomes. While prior studies have explored CTAC positioning in rTHA, research focusing on tumour cases and implant flange positioning precision remains limited. Additionally, the impact of intraoperative navigation on positioning accuracy warrants further investigation. This study assesses CTAC positioning accuracy in tumour resection and rTHA cases, focusing on the differences between preoperative planning and postoperative implant positions.

Methods

A multicentre observational cohort study in Australia between February 2017 and March 2021 included consecutive patients undergoing acetabular reconstruction with CTACs in rTHA (Paprosky 3A/3B defects) or tumour resection (including Enneking P2 peri-acetabular area). Of 103 eligible patients (104 hips), 34 patients (35 hips) were analyzed.

Results

CTAC positioning was generally accurate, with minor deviations in cup inclination (mean 2.7°; SD 2.84°), anteversion (mean 3.6°; SD 5.04°), and rotation (mean 2.1°; SD 2.47°). Deviation of the hip centre of rotation (COR) showed a mean vector length of 5.9 mm (SD 7.24). Flange positions showed small deviations, with the ischial flange exhibiting the largest deviation (mean vector length of 7.0 mm; SD 8.65). Overall, 83% of the implants were accurately positioned, with 17% exceeding malpositioning thresholds. CTACs used in tumour resections exhibited higher positioning accuracy than rTHA cases, with significant differences in inclination (1.5° for tumour vs 3.4° for rTHA) and rotation (1.3° for tumour vs 2.4° for rTHA). The use of intraoperative navigation appeared to enhance positioning accuracy, but this did not reach statistical significance.

Conclusion

This study demonstrates favourable CTAC positioning accuracy, with potential for improved accuracy through intraoperative navigation. Further research is needed to understand the implications of positioning accuracy on implant performance and long-term survival.

[Acetabular metastatic defect reconstruction using the modular revision support cup MRS-C]

OBJECTIVE

Stabilization of metastatic acetabular defects with a bone cement-augmented revision support cup for remobilization of oncological patients in advanced cancer stages.

INDICATIONS

Metastatic acetabular defects (Metastatic Acetabular Classification, MAC 2-4) in patients with a prognostic medium or long-term survival.

CONTRAINDICATIONS

Highly limited survival due to metastatic disease (< 6 weeks). Local bone or soft tissue infection. Primary bone tumor with curative treatment option. Advanced pelvic discontinuity. Recent wound compromising systemic therapy.

SURGICAL TECHNIQUE

Standard hip approach. Curettage of the metastatic defect and careful reaming of the acetabulum before insertion of the cup. Predrilling of the dome und flange screws before application of the bone cement through the center hole of the implant and filling of the acetabular defect. Complete insertion of the screws for compound osteosynthesis. Implant of a modular inlay or dual mobility system.

POSTOPERATIVE MANAGEMENT

Full weight bearing or mobilization with two crutches according to the level of pain. Adjuvant local radiation therapy after wound consolidation. Continuation of systemic therapy according to tumor board decision.

RESULTS

Between 2012 and 2019, we treated 14 patients with metastatic acetabular defects using the modular revision support cup "MRS-TITAN® Comfort", MRS-C, Peter Brehm GmbH, Weisendorf, Germany) at our institution. Mean Harris Hip Score improvement was 23.2 with a mean patient's survival of 9.7 months due to the reduced cancer-related prognosis; 13 of the 14 implants endured the patient's prognosis. One implant had to be removed due soft tissue defect-related periprosthetic joint infection.

Clinical outcomes in patients with neurological disorders following periacetabular tumor removal and endoprosthetic reconstruction of the hemipelvis

Background

Surgical treatment of musculoskeletal tumors in the periacetabular region present extremely difficult due to the complex anatomy and need for reconstruction. Orthopedic surgeons face more difficulties in patients with neurological conditions, which can cause increased muscle tone, an elevated risk of fractures, and compromised bone quality. There is limited evidence regarding endoprosthetic reconstruction for periacetabular tumors in individuals with neurological disorders.

Methods

We conducted a single-center retrospective study to examine the outcomes of patients with preexisting neurological conditions who underwent surgery to remove periacetabular tumors and who underwent endoprosthesis reconstruction. Clinical presentation, detailed neurological conditions, complications, and functional outcomes were studied.

Results

Sixteen out of the 838 patients were identified (1.91%), with a mean follow-up time of 33 months. The primary neurological conditions encompassed Parkinson's disease, Alzheimer's disease, dementia, and cerebral ischemic stroke. Every patient was diagnosed with periacetabular lesions that were either primary or oligometastatic. They underwent tumor resection and subsequently received endoprosthetic reconstruction of the hemipelvis. Three patients developed metastasis lesions later, and two patients experienced tumor recurrence. Five cases experienced hip dislocation-one with periprosthetic fracture and one with surgical site infection. The position of the prosthetic rotating center was not correlated with dislocation. The reoperation rate was 31.25%. The cohort of patients all presented with more extended hospital stays and rehabilitation. In 3 patients, the general functional score was good, while in 6 patients, it was fair; in 7 patients, it was regarded as poor. The average MSTS93 score was 49.71%.

Conclusion

Endoprosthetic reconstruction after periacetabular tumor resection is an effective way to eliminate tumors and salvage limbs. However, this group of patients has an increased likelihood of secondary surgery, complications, extended hospital stay, and no significant improvement in functional outcomes. Despite the diverse nature of the cohort, it is recommended to consider enhanced soft tissue reconstruction, supervised functional recovery and rehabilitation training.

Limb Salvage and Pelvic Reconstruction With Endoprosthesis After Pelvic Tumor Resection: A Narrative Review

Periacetabular defects following tumor resection present formidable challenges in reconstruction and continue to pose clinical difficulties. Historically, treatment approaches leaned towards hindquarter amputation; however, due to associated morbidities and functional limitations, limb-sparing procedures gained prominence in the 1980s. Nevertheless, the intricacies of pelvic anatomy and the imperative of achieving wide surgical margins while preserving essential structures make pelvic tumor resection and subsequent reconstruction inherently complex. Various reconstruction modalities have been explored, including non-vascularized fibular grafts and prosthetic implants. Among these options, the LUMiC® endoprosthesis stands out as a promising solution for pelvic reconstruction post-tumor resection. Characterized by a modular design featuring a hydroxyapatite-coated stem and acetabular cup, this device has shown favorable implant survival rates in studies, despite encountering complications primarily associated with soft tissue failure, dislocation, and infection. Notably, the incidence of complications varies across studies. The Henderson classification system delineates these complications, encompassing soft tissue issues, aseptic loosening, periprosthetic fractures, infections, and tumor recurrence. Despite the encouraging functional outcomes associated with the LUMiC® endoprosthesis, it is not immune to limitations. Concerns persist regarding complications such as dislocation and infection, underscoring the imperative for further research to evaluate the long-term durability and reliability of this reconstructive approach. Moreover, advancements in surgical techniques, perioperative management, and the advent of navigation-assisted procedures hold promise for enhancing outcomes and mitigating complication rates in pelvic reconstruction surgeries.

Orthopedic meta-implants

Meta-biomaterials, engineered materials with distinctive combinations of mechanical, physical, and biological properties stemming from their micro-architecture, have emerged as a promising domain within biomedical engineering. Correspondingly, meta-implants, which serve as the device counterparts of meta-biomaterials, offer exceptional functionalities, holding great potential for addressing complex skeletal diseases. This paper presents a comprehensive overview of the various types of meta-implants, including hybrid, shape-morphing, metallic clay, and deployable meta-implants, highlighting their unprecedented properties and recent achievement in the field. This paper also delves into the potential future developments of meta-implants, addressing the exploration of multi-functionalities in meta-biomaterials and their applications in diverse biomedical fields.

Dual Mobility for Oncological Hip Reconstruction: Significantly Reduced Dislocation Rates at 5 years

BACKGROUND

Although dual mobility total hip arthroplasty has become increasingly common in recent years, limited remains known on dual mobility in surgical oncology. This university-based investigation compared dislocation and revision rates of DMs, conventional total hip arthroplasty (THA), and hemiarthroplasties (HAs) for oncological hip reconstruction.

METHODS

An institutional tumor registry was used to identify 221 patients undergoing 45 DMs, 67 conventional THAs, and 109 HAs, performed for 17 primary hip tumors and 204 hip metastases between 2010 and 2020. The median age at surgery was 65 years, and 52% were female. The mean follow-up was 2.5 years. Kaplan-Meier survivorship curves and log-rank tests were done to compare dislocation and revision rates among all 221 patients, after a one-to-one propensity match, based on age, sex, tumor type (metastasis, primary tumor), and tumor localization (femur, acetabulum).

RESULTS

The 5-year survivorship free of dislocation was 98% in DMs, 66% in conventional THAs ( P = 0.03; all P values compared with DMs), and 97% among HAs ( P = 0.48). The 5-year survivorship free of revision was 69% in DMs, 62% in conventional THAs ( P = 0.68), and 92% in HAs ( P = 0.06). After propensity matching, the 5-year survivorship free of dislocation was 42% in 45 conventional THAs ( P = 0.027; compared with all 45 DMs) and 89% in 16 matched HAs ( P = 0.19; compared with 16 DMs with femoral involvement only). The 5-year survivorship free of revision was 40% in matched conventional THAs ( P = 0.91) and 100% in matched HAs ( P = 0.19).

CONCLUSIONS

DMs showed markedly lower rates of dislocation than conventional THAs, with overall revision rates remaining comparable among different designs. DMs should be considered the option of choice for oncological hip reconstruction if compared with conventional THAs. HAs are a feasible alternative when encountering femoral disease involvement only.

LEVEL OF EVIDENCE

III.

Pelvic-girdle reconstruction with three-dimensional-printed endoprostheses after limb-salvage surgery for pelvic sarcomas: current landscape

Resection of pelvic bone tumors and the subsequent reconstruction of the pelvic girdle pose challenges due to complex anatomy, load-bearing demands, and significant defects. 3D-printed implants have revolutionized pelvic girdle reconstruction by offering customized solutions, porous surface structures for precise resection with custom guides, and improved integration. Many tertiary medical centers have adopted 3Dprinted hemipelvic endoprostheses, leading to enhanced outcomes. However, most studies are limited to single centers, with a small number of cases and short follow-up periods. Additionally, the design of these implants often relies heavily on individual experience, resulting in a lack of uniformity and significant variation. To provide a comprehensive assessment of this technology, we conducted an analysis of existing literature, encompassing tumor resection classification, various types of prosthesis design, reconstruction concepts, and post-reconstruction functional outcomes.

Management of metastatic bone disease of the pelvis: current concepts

PURPOSE

Metastatic disease of the pelvis is frequently associated with severe pain and impaired ambulatory function. Depending on the patient's characteristics, primary tumor, and metastatic pelvic disease, the treatment choice may be varied. This study aims to report on the current management options of metastatic pelvic disease.

METHODS

We comprehensively researched multiple databases and evaluated essential studies about current concepts of managing a metastatic bone disease of the pelvis, focusing on specific indications as well as on the result of treatment.

RESULTS

Pelvic metastases not in the periacetabular region can be managed with modification of weight-bearing, analgesics, bisphosphonates, chemotherapy and/or radiotherapy. Minimally invasive approaches include radiofrequency ablation, cryoablation, embolization, percutaneous osteoplasty, and percutaneous screw placement. Pathological or impending periacetabular fracture, excessive periacetabular bone defect, radioresistant tumor, and persistent debilitating pain despite non-surgical treatment and/or minimally invasive procedures can be managed with different surgical techniques. Overall, treatment can be divided into nonoperative, minimally invasive, and operative based on specific indications, the expectations of the patient and the lesion.

CONCLUSION

Different treatment modalities exist to manage metastatic pelvic bone disease. Decision-making for the most appropriate treatment should be made with a multidisciplinary approach based on a case-by-case basis.

Stress-shielding resistant design of custom pelvic prostheses using lattice-based topology optimization

Endoprosthetic reconstruction of the pelvic bone using 3D-printed, custom-made implants has delivered early load-bearing ability and good functional outcomes in the short term to individuals with pelvic sarcoma. However, excessive stress-shielding and subsequent resorption of peri‑prosthetic bone can imperil the long-term stability of such implants. To evaluate the stress-shielding performance of pelvic prostheses, we developed a sequential modeling scheme using subject-specific finite element models of the pelvic bone-implant complex and personalized neuromusculoskeletal models for pre- and post-surgery walking. A new topology optimization approach is introduced for the stress-shielding resistant (SSR) design of custom pelvic prostheses, which uses 3D-printable porous lattice structures. The SSR optimization was applied to a typical pelvic prosthesis to reconstruct a type II+III bone resection. The stress-shielding performance of the optimized implant based on the SSR approach was compared against the conventional optimization. The volume of the peri‑prosthetic bone predicted to undergo resorption post-surgery decreased from 44 to 18%. This improvement in stress-shielding resistance was achieved without compromising the structural integrity of the prosthesis. The SSR design approach has the potential to improve the long-term stability of custom-made pelvic prostheses.

Custom designed and 3D-printed titanium pelvic implants for acetabular reconstruction after tumour resection

BACKGROUND

Reconstructive procedure following resection of large pelvic tumours around the hip joint remains a complex challenge.

METHODS

This study presents a retrospective case series of patients presenting with benign or malignant pelvic tumour for which an internal hemipelvectomy including the hip joint and subsequent reconstruction with a custom designed 3-dimensional printed titanium pelvic implant (3DPPI) has been performed between August 2013 and January 2018.

RESULTS

15 consecutive patients with a median age of 33.9 years (IQR 26.4-72.2) and a median BMI of 20.7 kg/m2 (IQR 19.0-33.3) were reviewed after median follow-up of 33.8 months (IQR 24.0-78.1). The majority of patients presented with a malignant tumour as their principal diagnosis (n = 13, 86.7%). The median surgical time was 5.5 hours (IQR 4.5-8.5) and median peri-operative blood loss was 5000 ml (IQR 2000-10000). The median MSTS score at follow-up was 63.3% (IQR 51.7-86.7%). The median NRS in rest was 0.0 (IQR 0.0-5.0), the median NRS during activity was 2.0 (IQR 0.5-7.0) and the median HOOS-PS was 76.6% (IQR 67.9-91.0). 4 patients had implant-specific complications (n = 4, 26.6%); 1 hip dislocation (Henderson type 1a), 3 structural complications (type 3a), 1 deep infection (type 4a) and 1 local tumour recurrence (type 5b). At follow-up, 4 out of 15 implants were classified as a failure, resulting in an implant survival rate of 73.3%.

CONCLUSIONS

Acceptable peri-operative outcomes, functional results, complication rates and short-term implant survival can be achieved in a cohort of complex patients undergoing 3DPPI reconstruction after hemipelvectomy including the acetabulum.

Pelvic bone sarcomas, prognostic factors, and treatment: A narrative review of the literature

Primary sarcomas of bone are rare malignant mesenchymal tumors. The most common bone sarcomas are osteosarcoma, Ewing's sarcoma, and chondrosarcoma. The prognosis has improved over the years, but bone sarcomas are still life-threatening tumors that need a multidisciplinary approach for diagnosis and treatment. Bone sarcomas arising in the pelvis present a unique challenge to orthopedic oncologists due to the absence of natural anatomical barriers, the close proximity of vital neurovascular structures, and the high mechanical demands placed on any pelvic reconstruction following the excision of the tumor. While radiotherapy has an important role especially in Ewing's sarcoma and chemotherapy for both Ewing's sarcoma and osteosarcoma, surgery remains the main choice of treatment for all three entities. While external hemipelvectomy has remained one option, the main aim of surgery is limb salvage. After complete tumor resection, the bone defect needs to be reconstructed. Possibilities to reconstruct the defect include prosthetic or biological reconstruction. The method of reconstruction is dependent on the location of tumor and the surgery required for its removal. The aim of this article is to give an insight into pelvic bone sarcomas, their oncological and surgical outcomes, and the options for treatment based on the authors' experiences.

Beyond type III Paprosky acetabular defects: are partial pelvic replacements with iliosacral fixation successful?

PURPOSE

Supra-acetabular bone loss close beyond the sciatic notch is one of the most challenging defect types for stable anatomical reconstruction in revision arthroplasty. Using reconstruction strategies from tumour orthopaedic surgery, we adapted tricortical trans-iliosacral fixation options for custom-made implants in revision arthroplasty. The aim of the present study was to present the clinical and radiological results of this extraordinary pelvic defect reconstruction.

METHODS

Between 2016 and 2021, 10 patients with a custom-made pelvic construct using tricortical iliosacral fixation (see Fig. 1) were included in the study. Follow-up was 34 (SD 10; range 15-49) months. Postoperatively CT scans evaluating the implant position were performed. Functional outcome and the clinical results were recorded.

RESULTS

Implantation was possible as planned in all cases in 236 (SD 64: range 170-378) min. Correct centre of rotation (COR) reconstruction was possible in nine cases. One sacrum screw crossed a neuroforamen in one case without clinical symptoms. During the follow-up period, four further operations were required in two patients. There were no individual implant revisions or aseptic loosening recorded. The Harris Hip Score increased significantly from 27 Pts. to 67 Pts. with a mean improvement of 37 (p < 0.005). EQ-5D developed from 0.562 to 0.725 (p = 0.038) as a clear improvement in quality of life.

CONCLUSION

Custom-made partial pelvis replacement with iliosacral fixation offers a safe solution in "beyond Paprosky type III defects" for hip revision arthroplasty. Due to meticulous planning, precise implantation with good clinical outcome can be achieved. Furthermore, the functional outcome and patient satisfaction increased significantly showing promising early results with a relatively low complication rate.

Incidence and risk of surgical site infection/periprosthetic joint infection in tumor endoprosthesis-data from the nationwide bone tumor registry in Japan

BACKGROUND

Surgical site infection (SSI)/periprosthetic joint infection (PJI) is a devastating complication in limb salvage surgery with endoprosthesis reconstruction for malignant bone tumors. The main bottleneck for data collection and analysis for the status of SSI/PJI in tumor endoprosthesis is the low absolute case numbers of this rare cancer. The accumulation of many cases is possible by administrating nationwide registry data.

METHODS

The data on malignant bone tumor resection with tumor endoprosthesis reconstruction were extracted from the Bone and Soft Tissue Tumor Registry in Japan. The primary endpoint was defined as the need for additional surgical intervention for infection control. The incidence of postoperative infection and its risk factors were analyzed.

RESULTS

A total of 1342 cases were included. The incidence of SSI/PJI was 8.2%. The incidence of SSI/PJI in the proximal femur, distal femur, proximal tibia, and pelvis were 4.9%, 7.4%, 12.6%, and 41.2%, respectively. Location in the pelvis or proximal tibia, tumor grade, indication of myocutaneous flaps, and delayed wound healing proved to be independent risks for SSI/PJI, whereas age, sex, previous surgery, tumor size, surgical margin, application of chemotherapy and radiotherapy were not significant.

CONCLUSIONS

The incidence was equal to those in previous studies. The result reconfirmed the high incidence of SSI/PJI in pelvis and proximal tibia cases and cases with delayed wound healing. Novel risk factors such as tumor grade and application of myocutaneous flaps were marked. The administration of nationwide registry data was informative for the analysis of SSI/PJI in tumor endoprosthesis.

The iliac stemmed cup in reconstruction of the acetabular defects secondary to tumor resection: a systematic review of literature

INTRODUCTION

Stemmed acetabular cups are suitable for reconstruction in case of important bone loss. Nevertheless, their use is not so common, because generally judged very invasive and technically difficult to implant. The aim of the present review is to verify the results of their use and to evaluate indications and complications.

MATERIALS AND METHODS

Literature research was performed in the main healthcare databases; indications, surgical technique, related complications, functional results and implant survival were valued and analyzed for every selected paper.

RESULTS

13 studies were selected, for a population of 424 patients and 428 hips. The main indication was reconstruction after tumor removal; the primary non-oncologic indication was revision for aseptic loosening. The most frequent complications were aseptic loosening and implant failure (16.2%), followed by deep infection (11.3%) and dislocation (9.8%). The average MSTS score was 65.9%; while data regarding functional results for degenerative cases are quite fragmented. The 5-years implant survival was 73.6%.

CONCLUSIONS

Data regarding SAC prostheses are quite rare in the literature; no prospective studies with comparisons with other reconstruction techniques are available so their use is mainly based on the experience of single centers. While data for tumors are more consistent and supported by studies, information on revisions of hip prosthesis implanted for degenerative problems is quite scarce. Preliminary results on the SAC prosthesis as a valid alternative both for tumoral and degenerative revision cases are encouraging. Prospective randomized studies are advocated to value results compared to alternative techniques.

LUMiC® endoprosthesis for pelvic reconstruction: A Canadian experience

BACKGROUND AND OBJECTIVES

The LUMiC® prosthesis was introduced to reduce the mechanical complications encountered with periacetabular reconstruction after pelvic tumor resection. Few have evaluated the outcomes associated with its use.

METHODS

A retrospective study from five Orthopedic Oncology Canadian centers was conducted. All patients with a LUMiC® endoprosthesis were included. Their charts were reviewed for surgical and functional outcomes.

RESULTS

A total of 16 patients were followed for 28 months (3-60). A total of 12 patients (75%) had a LUMiC® after a resection of a primary sarcoma. Mean surgical time was 555 min. Four patients (25%) had a two-stages procedure. MSTS score was 60.3 preoperatively and 54.3 postoperatively. Patients got a dual mobility bearing and the silver coated implant was used in 7 patients (43.7%). Five patients (31.3%) underwent capsular reconstruction using a fabric. Silver-coating was not found to reduce infection risk (p = 0.61) and capsuloplasty did not prevent dislocation (p = 0.6). Five patients had peroperative complications (31.3%). Eight patients (50%) had an infection including all four with two-stages surgery. Dislocation occurred in five patients (31.3%) whereas no cases of aseptic loosening were reported. A total of 10 patients (62.5%) needed a reoperation.

CONCLUSION

LUMiC® endoprosthesis provides low rates of aseptic loosening on medium-term follow-up. Infection and dislocation are common complications but we were unable to show benefits of capsuloplasty and silver-coated implants.

What are the 2-year survivorship outcomes of custom hemipelvis reconstruction after hemipelvectomy and revision arthroplasty? The evolution of a custom ilium "monoflange"

BACKGROUND

Innovations in machined and three-dimensionally (3D) printed implant technology have allowed for customized complex pelvic reconstructions. We sought to determine the survivorship of custom hemipelvis reconstruction using ilium-only fixation at a minimum 2-year follow-up, their modes of failure, and the postoperative complications resulting from the procedure.

METHODS

A retrospective review identified 12 consecutive patients treated with custom hemipelvis reconstruction. Indications for surgery were bone tumor requiring internal hemipelvectomy (four patients) or multiply revised, failed hip arthroplasty with massive bone loss (eight patients). All patients had a minimum of 2-year follow-up with a mean of 60.5 months. Kaplan-Meier survivorship analysis was determined for all patients. Postoperative complications and reoperations were categorized for all patients.

RESULTS

At a mean of 60.5 months, 11 of 12 patients had retained their custom implant (92% survivorship). One implant was removed as a result of an acute periprosthetic joint infection (PJI). There were no cases of aseptic loosening. Seven of 12 patients required reoperation (three PJI; two dislocations; two superficial wound complications), with five patients going on to reoperation-free survival.

CONCLUSIONS

Custom hemipelvis reconstruction utilizing an ilium monoflange provides durable short-term fixation at a minimum 2-year follow-up. Reoperation for infection and dislocation is common.

Porous tantalum acetabular cups for reconstructions after peri-acetabular resections of primary bone tumours

INTRODUCTION

Periacetabular reconstruction after resection of primary bone tumour is a very demanding procedure. They are frequently associated with scarce functional results and a high rate of complications. We report a series of patients with periacetabular resections for primary bone tumours and reconstruction with a porous tantalum (PT) acetabular cup (AC).

MATERIALS AND METHODS

27 patients (median age 30 years) were included, being affected by primary bone tumours of the pelvis and treated with peri-acetabular resection and reconstruction with a PT AC. The diagnoses were 13 osteosarcomas, 7 chondrosarcomas and 7 Ewing sarcomas. Function was assessed with the Harris Hip Score and complications were classified according to Zeifang.

RESULTS

The median follow-up was 70 months. 1 patient required removal of the PT AC because of implant associated infection 55 months after surgery. There was 1 hip dislocation and no case of aseptic loosening. At final follow-up, the median HHS was 81 points (range 48-92).

CONCLUSIONS

The used PT AC had good medium-term survival rates and good functional results. This technique is a viable reconstructive option after resections of periacetabular primary bone sarcomas.

Internal Hemipelvectomy for primary bone sarcomas using intraoperative patient specific instruments- the next step in limb salvage concept

BACKGROUND

During pelvic Sarcoma resections, Surgeons often struggle to obtain negative margins while minimizing collateral damage and maintaining limb function. These complications are usually due to the complex anatomy of the pelvis. Here we present an accurate 3D surgical approach, including pre-operative printing of models and intraoperative patient-specific instruments (PSIs) for optimizing pelvic sarcoma resections.

METHODS

This single-center retrospective study (N = 11) presents surgical, functional, and oncological outcomes of patients (average age 14.6 +/- 7.6 years, 4 males) who underwent pelvic sarcoma resections using a 3D surgical approach between 2016 and 2021. All patients were followed up for at least 24 months (mean = 38.9 +/- 30.1 months).

RESULTS

Our results show promising surgical, oncological, and functional outcomes. Using a 3D approach, 90.9% had negative margins, and 63.6% did not require reconstruction surgery. The average estimated blood loss was 895.45 ± 540.12 cc, and the average surgery time was 3:38 ± 0.05 hours. Our results revealed no long-term complications. Three patients suffered from short-term complications of superficial wound infections. At 24 month follow up 72.7% of patients displayed no evidence of disease. The average Musculoskeletal Tumor Society (MSTS) score at 12 months was 22.81.

CONCLUSION

3D technology enables improved accuracy in tumor resections, allowing for less invasive procedures and tailored reconstruction surgeries, potentially leading to better outcomes in function and morbidity. We believe that this approach will enhance treatments and ease prognosis for patients diagnosed with pelvic sarcoma and will become the standard of care in the future.

Comparison of customized 3D-printed prosthesis and screw-rod-cage system reconstruction following resection of periacetabular tumors

Background and purpose

Various operative methods are used for reconstructing pelvic girdle after resection of primary malignant periacetabular tumor has been reported. The objective of this study was to evaluate the accuracy, effectiveness, and safety of customized three dimensional-printed prosthesis (3DP) in the reconstruction of bone defects compared with conventional reconstruction using the screw-rod-cage system.

Methods

A retrospective case–control analysis of 40 patients who underwent pelvic tumor resection and reconstruction with a customized 3D-printed prosthesis (3DP), or screw-rod-cage system (SRCS) between January 2010 and December 2019 was performed. The minimum follow-up time for patients alive was 2 years. Blood loss, operation time, complications, surgical margin, local recurrence, distant metastases, status at time of latest follow-up, MSTS-93 score, Harris hip score, and postoperative radiographic parameters were recorded. Moreover, overall survival, tumor-free survival, and prosthesis survival rates in both groups were compared.

Results

Customized 3DP reconstruction was performed in 15 patients, and SRCS reconstruction was done in 25 patients. The group of patients treated with customized 3DP reconstruction had significantly shorter operation time (323.7 ± 83.7 vs. 393.6 ± 98.8 min; P = 0.028) and more precise (all P < 0.05) radiographic reconstruction parameters than patients in the SRCS group. Fewer complications (P = 0.026), better MSTS score (P = 0.030), and better Harris hip score (P = 0.016) were achieved in the 3DP group. Furthermore, the survival rate of prosthesis was also significantly better in the 3DP group (P = 0.039). However, blood loss, surgical margin, local recurrence, distant metastases, and status at time of latest follow-up had no significant difference between two groups.

Conclusion

Compared with the screw-rod-cage system reconstruction, the customized 3D-printed prosthesis reconstruction is equally safe and effective, but it is more accurate and time-saving and is associated with fewer complications.

3D-printed hemipelvic prosthesis combined with a dual mobility bearing in patients with primary malignant neoplasm involving the acetabulum: clinical outcomes and finite element analysis

BACKGROUND

Limb salvage reconstruction for pelvic tumors, especially periacetabular tumors, is challenging. We combined the use of dual mobility bearing and 3D-printed hemipelvic prosthesis to improve function and reduce the probability of complications after hemi-pelvic resection in patients with primary acetabular malignancy. The purpose of this study was to evaluate the efficacy and safety of this combination.

METHODS

Between October 2011 and May 2021, 11 patients with malignancies involving the acetabulum received hemipelvic replacement with a 3D-printed prosthesis and dual mobility bearing. Follow-up of postoperative survival, complications, and Musculoskeletal Tumor Society 93 (MSTS-93) lower limb functional scores were carried out. A finite element model of the postoperative pelvis was developed and input into the finite element analysis software. The Von Mises equivalent stress formula was used to analyze the stress distribution of each part of the pelvis under one gait cycle and the stress distribution at different angles of the hip joint.

RESULTS

By the last follow-up, 9 of the 11 patients (81.8%) were still alive, and 2 patients had local tumor recurrence. The complications including 1 deep infection and 1 dislocation of the artificial joint. Excluding 1 amputation patient, the average score of the remaining 8 patients at the last follow-up was 21.4/30 (71.3%) on the MSTS-93. In the reconstructed pelvis, stress distributions were concentrated on the junction between hemipelvic prosthesis and screw and iliac bone on the resected side, and between femoral prosthesis stem and femoral bulb, while the stress of polyethylene lining was small. Before impact, the polyethylene lining will rotate at a small angle, about 3°. The inner stress of polyethylene liner is greater than the outer stress in all conditions. The polyethylene liner has no tendency to slide out.

CONCLUSION

Pelvic tumor resection and reconstruction using 3D-printed hemipelvic prosthesis combined with dual mobility bearing was an effective treatment for pelvic tumors. Our patients achieved good early postoperative efficacy and functional recovery. The dual mobility bearing is beneficial to prevent dislocation, and the mechanical distribution and wear of the prosthesis are acceptable.

Surgical Site Infection after Bone Tumor Surgery: Risk Factors and New Preventive Techniques

The management of malignant bone tumors requires multidisciplinary interventions including chemotherapy, radiation therapy, and surgical tumor resection and reconstruction. Surgical site infection (SSI) is a serious complication in the treatment of malignant bone tumors. Compared to other orthopedic surgeries, the surgical treatment of malignant bone tumors is associated with higher rates of SSIs. In patients with SSIs, additional surgeries, long-term administrations of antibiotics, extended hospital stays, and the postponement of scheduled adjuvant treatments are required. Therefore, SSI may adversely affect functional and oncological outcomes. To improve surgical outcomes in patients with malignant bone tumors, preoperative risk assessments for SSIs, new preventive techniques against SSIs, and the optimal use of prophylactic antibiotics are often required. Previous reports have demonstrated that age, tumor site (pelvis and tibia), extended operative time, implant use, body mass index, leukocytopenia, and reconstruction procedures are associated with an increased risk for SSIs. Furthermore, prophylactic techniques, such as silver and iodine coatings on implants, have been developed and proven to be efficacious and safe in clinical studies. In this review, predictive factors of SSIs and new prophylactic techniques are discussed.

Feasibility and preliminary efficacy of tantalum components in the management of acetabular reconstruction following periacetabular oncologic resection in primary malignancies

Background

The aim of the study was to investigate the feasibility and preliminary efficacy of tantalum components utility in the reconstruction of acetabular defects following periacetabular oncologic resection of primary malignancies.

Methods

We prospectively collected a consecutive of 15 cases that were treated with tantalum components for acetabular reconstruction after periacetabular oncologic resection from January 2018 to December 2018. The cohort included 8 male and 7 female patients, with a mean age of 47.6 years (range, 33 to 67 years). Pathology types: chondrosarcoma (n = 9), malignant bone giant cell tumor (n = 3) and osteosarcoma (n = 3). Clinical outcomes, functional and radiographic results were recorded in detail for analysis.

Results

Patients received planned oncologic resection and tantalum components reconstruction without casualty; they were followed up with a mean of 39.7 months (35–45 months). The mean operation time was 4.0 h (3.0–6.0 h), and the mean blood loss was 1260 ml (800–2200 ml). Functional outcomes were assessed by MSTS-93 scale, with an average of 21.8 (12.0–26.0 scores), among which 3 cases were excellent, 11 were good and 1 was fair. The mean Harris Hip Score was 79.1scores (46.0–92.0 scores) at 1-year follow-up postoperatively. 3(3/15, 20.0%) cases experienced postoperative complications: 2 cases with hip dislocation received closed reduction under general anesthesia and were fixed with hip joint abduction braces for 6 weeks; one case had a superficial infection and received debridement with a delayed wound healing. Oncologic prognosis: one case relapsed at 8-month follow-up and received hemi-pelvic amputation; and another osteosarcoma patient experienced relapse with pulmonary metastasis and received further chemotherapy. No prosthetic loosening, displacement or fracture occurred during the follow-up period.

Conclusion

Preliminary results suggested that the use of tantalum components in the management of acetabular reconstruction following periacetabular oncologic resection provided reasonable improvement on functional outcomes and early stability of the prostheses. Porous tantalum components are conducive to bony ingrowth, which is a potential alternative to various existing reconstruction techniques to achieve better functional outcomes.

[Pelvic limb-salvage surgery for malignant tumors: 30 years of progress in China]

This article reviews the development and progress in the field of limb salvage treatment, surgical techniques, and function reconstruction of pelvic malignant tumors in China in the past 30 years. Based on the surgical classification of pelvic tumor resection in different parts, the development of surgical techniques and bone defect repair and reconstruction methods were described in detail. In recent years, in view of the worldwide problem of biological reconstruction after pelvic tumor resection, Chinese researchers have systematically proposed the repair and reconstruction methods and prosthesis design for bone defects after resection of different parts for the first time in the world. In addition, a systematic surgical classification (Beijing classification) was first proposed for the difficult situation of pelvic tumors involving the sacrum, as well as the corresponding surgical plan and repair and reconstruction methods. Through unremitting efforts, the limb salvage rate of pelvic malignant tumors in China has reached more than 80%, which has preserved limbs and restored walking function for the majority of patients, greatly reduced surgical complications, and achieved internationally remarkable results.

A novel limb-salvage reconstruction strategy with a custom hemipelvic endoprosthesis and preserved femoral head following the resection of periacetabular tumors: A preliminary study

The treatment of periacetabular malignancy frequently challenges surgeons. To simplify the surgical procedure, we performed a novel reconstruction strategy preserving the femoral head for patients with periacetabular malignancies. We retrospectively reviewed 14 patients who underwent total en bloc resection of a periacetabular tumor and reconstruction of the hip joint with an individualized hemipelvic endoprosthesis and remaining femoral head from July 2015 to January 2019 at our center. Regions of pelvic resection: region II-4 (28.6%), region I + II-5 (35.7%), region II + III-2 (14.3%) and region I + II + III-3 (21.4%). The oncological outcomes were that 13 patients survived without disease and one patient survived with lung metastasis. None of the patients experienced local recurrence (range: 20-62 months; mean: 32 months). The incidence of postoperative complications was 35.7%, including delayed wound healing and deep venous thrombosis. No prosthesis-related complications occurred until the last follow-up in this study (range: 20-62 months; mean: 32 months). The mean Musculoskeletal Tumor Society functional outcome score was 23.2. The mean Toronto Extremity Salvage Score of the patients was 75.7 points, with a mean limb discrepancy of 1.51 cm (range: 0.5-3.2 cm). Reconstruction with preservation of the femoral head showed acceptable early functional and oncological outcomes, and it had an acceptable complication rate.

Survival of the GAP II cage in the management of metastatic disease of the acetabulum

AIMS

The aim of this study was to assess the clinical and radiological outcomes of an antiprotrusio acetabular cage (APC) when used in the surgical treatment of periacetabular bone metastases.

METHODS

This retrospective cohort study using a prospectively collected database involved 56 patients who underwent acetabular reconstruction for periacetabular bone metastases or haematological malignancy using a single APC between January 2009 and 2020. The mean follow-up was 20 months (1 to 143). The primary outcome measure was implant survival. Postoperative radiographs were analyzed for loosening and failure. Patient and implant survival were assessed using a competing risk analysis. Secondary parameters included primary malignancy, oncological treatment, surgical factors, length of stay in hospital, and postoperative complications.

RESULTS

A total of 33 patients (59%) died during the study period at a mean of 15 months postoperatively (1 to 63). No patient had radiological evidence of loosening or failure. Acetabular component survival was 100%. Three patients (5.4%) had further surgery; one (1.8%) underwent revision of the femoral component for dislocation, one required debridement with implant retention for periprosthetic joint infection, and one required closed reduction for dislocation. Using death as a competing risk, at 100 months, the probability of revision was 0.036 and the risk of death was 0.84.

CONCLUSION

With appropriate patient selection, the antiprotrusio cage offers good implant survival, with a reasonable perioperative complication rate in this high-risk group of patients when managing metastatic disease or haematological malignancy around the acetabulum. Cite this article: Bone Joint J 2022;104-B(4):504-509.

Periacetabular reconstruction following limb-salvage surgery for pelvic sarcomas

Limb-salvage surgery for pelvic sarcomas remains one of the most challenging surgical procedures for musculoskeletal oncologists. In the past several decades, various surgical techniques have been developed for periacetabular reconstruction following pelvic tumor resection. These methods include endoprosthetic reconstruction, allograft or autograft reconstruction, arthrodesis, and hip transposition. Each of these procedures has its own advantages and disadvantages, and there is no consensus or gold standard for periacetabular reconstruction. Consequently, this review provides an overview of the clinical outcomes for each of these reconstructive options following pelvic tumor resections. Overall, high complication rates are associated with the use of massive implants/grafts, and deep infection is generally the most common cause of reconstruction failure. Functional outcomes decline with the occurrence of severe complications. Further efforts to avoid complications using innovative techniques, such as antibiotic-laden devices, computer navigation, custom cutting jigs, and reduced use of implants/grafts, are crucial to improve outcomes, especially in patients at a high risk of complications.

Application of MRI images based on Spatial Fuzzy Clustering Algorithm guided by Neuroendoscopy in the treatment of Tumors in the Saddle Region

Objective:

The paper applies spatial fuzzy clustering algorithm to explore the role and value of neuroendoscopic assisted technology in the operation of tumors in the saddle region, and analyze the MRI image characteristics of tumors in the saddle region.

Methods:

The clinical data of 63 patients from our hospital who underwent neuroendoscopic assisted microscopy to remove tumors in the saddle area from 2017 to 2019 (neuroendoscopy-assisted group) were collected. Seventy six patients who occupied the saddle area by microscopic resection only in the same period (Simple microscope group) clinical data. By comparing the patient’s tumor resection rate, postoperative complication rate and postoperative recurrence rate, the surgical effect was evaluated.

Results:

The total resection rates of the tumors in the neuroendoscopy-assisted group and the microscope-only group were 95.24% (60/63) and 80.26% (61/76). The incidence of postoperative vasospasm was 3.17% (2/63) and 13.16% (10/76), the incidence of nerve injury was 0 (0/63) and 6.58% (5/76), the difference was statistically significant (P <0.05). There was no significant difference in the incidence of postoperative infection, cerebrospinal fluid leakage and postoperative recurrence rate between the two groups (P> 0.05).

Conclusion:

Neuroendoscopy-assisted microscopy-based removal of the saddle area occupying space based on spatial fuzzy clustering algorithm can increase the total tumor resection rate and reduce the incidence of complications.

A novel and secure technique of stemmed acetabular cup implantation in complex hip reconstructions: a comparative study and technical note

PURPOSE

The stemmed acetabular cup (SAC) can be considered in several complicated situations. This type of prosthesis uses the iliac isthmus, which is most often preserved, thus allowing solid anchorage. Its implantation is prone to mechanical complications intraoperatively, such as extra-isthmic effraction, fracture, and early aseptic loosening. The aim of our study was to compare a new technique using a flexible motorized reamer combined with isthmus catheterization (Group A) versus the standard technique deploying a rigid reamer alone (Group B).

MATERIALS AND METHODS

A retrospective analysis was carried out of the SACs implanted at our hospital. The main evaluation criterion was visualization of extra-isthmic effraction (EIE) of the stem.

RESULTS

Fifty-six SACs (Integra Lepine®, Genay, France) were implanted, 31 in group A and 25 in group B. The mean follow-up was 21.6 months ± 22.3. This study found fewer EIEs using a flexible motorized reamer (0 versus 5, p = 0.014), less perioperative bleeding (p = 0.054), and less aseptic loosening in group A (p = 0.034). There was no difference in terms of infection or other mechanical complications post-operatively between the two groups.

CONCLUSION

Using iliac catheterization combined with a flexible motorized reamer when implanting a SAC helps to avoid EIE and it also appears to reduce complications such as peri-operative bleeding and early aseptic loosening. We recommend use of this surgical technique rather than a rigid reamer alone, and this new technique should allow widespread and more accessible use of this specific type of implant.

A review of the clinical and engineering performance of dual-mobility cups for total hip arthroplasty

Charnley's low-friction principle of total hip arthroplasty (THA) is recognized as the gold standard. However, complications may arise, and one of the major reasons for revising THA is dislocation. Under such a background, Pr. Gilles Bousquet invented dual-mobility cups (DMC) in the 1970s to fight against hip instability. Despite the excellent clinical results of DMC compared with conventional implants, the clinical application of DMC is limited by concerns about the dual articulations, leading to rapid wear and the subsequent osteolysis and the wear on the retaining rim of the liner due to its contact with the femoral neck causing intraprosthetic dislocation (IPD). As a result, the original design of DMC has been upgraded by using highly cross-linked polyethylene, refining the geometry of the femoral neck, etc. After the improvement, the wear rate of the contemporary DMC liners has been largely reduced compared with the first generation DMC, and the IPD incidence rate has been controlled. However, with the increasing fretting corrosion damage found at the taper-trunnion interfaces in conventional implants, the contemporary DMC may face a similar problem. This is because the additional articulation and the larger head design of DMC gain the risk of articulation wear and taper-trunnion interface corrosion. Since there are still many potential DMC engineering issues that have not been extensively researched, future studies focusing on the wear and corrosion aspects are required. The purpose of this review article is to summarize both the clinical and engineering issues for DMC with possible directions for future research.

Acetabular reconstruction in oncological surgery: A systematic review and meta-analysis of implant survivorship and patient outcomes

BACKGROUND

Reconstruction of the hip for peri-acetabular oncological disease remains a challenge. The objective of this study was to summarize the evidence and identify techniques utilized for primary and metastatic tumors of the acetabulum and hemipelvis.

METHODS

A systematic review of the published literature was carried out in accordance with PRISMA guidelines. MEDLINE, EMBASE and Cochrane databases identified relevant articles. Quality was assessed using the Newcastle-Ottawa Scale. The study was registered on PROSPERO.

RESULTS

53 papers were included, 16 were suitable for meta-analysis. 909 patients had primary and 1140 metastatic disease. 1094 patients underwent reconstruction with conventional total hip arthroplasty (with or without cup-cage or cement augmentation) or modifications of the Harrington procedure, collectively termed 'non-complex'. 928 patients underwent 'complex' reconstructions with either a modular hemipelvic, saddle, reverse snow-cone, custom-made or 3D-printed endoprosthesis. The most common complication was deep infection (11%) followed by dislocation (5%). Mean MSTS scores were 61.9% for 'non-complex' versus 63.2% for 'complex' reconstruction. Meta-analysis suggested increased mortality for primary (OR 3.14; 95% CI 1.15-8.54) and trends toward reduced mortality for metastatic disease (OR 0.93; 95% CI 0.26-3.29) following 'complex' versus 'non-complex' reconstruction. Reoperation rates were higher following 'complex' reconstruction for metastatic disease (OR 1.90; 95% CI 0.66-5.46) and similar for primary disease (OR 0.98; 95% CI 0.45-2.14).

CONCLUSIONS

Peri-acetabular tumors are associated with high rates of morbidity and mortality. Decisions regarding implant selection are multi-factorial with recent increase in the use of custom-made and 3D-printing technologies. Multiple factors contribute to the oncological outcome and patient function. Further research is required in order to guide optimal practice.

Pelvic Ring Reconstruction After Iliac or Iliosacral Resection of Pediatric Pelvic Ewing Sarcoma: Use of a Double-Barreled Free Vascularized Fibular Graft and Minimal Spinal Instrumentation

BACKGROUND

In patients undergoing iliosacral resections, pelvic ring reconstruction can maintain stability of the pelvis and spinal column, which is expected to achieve good functional outcomes. However, no optimal reconstruction method has been established. We aimed to analyze the outcome of pelvic ring reconstruction using double-barreled free vascularized fibular graft (FVFG) and internal fixation after iliosacral resections in children.

METHODS

We retrospectively reviewed 16 children with pelvic Ewing sarcoma who underwent pelvic ring reconstruction using double-barreled FVFG after iliosacral resection. The fibular graft was placed between the supraacetabular region distally and the remaining ilium or sacrum proximally. The stability of the remaining pelvis and spinal column was provided by minimal spinal instrumentation.

RESULTS

Eleven Type-I and 5 Type-I+IV resections were performed for 10 boys and 6 girls, who had a mean age of 13.4 years (range, 10 to 18 years). The mean follow-up was 49.8 months (range, 28 to 96 months). At the time of the final follow-up, 14 patients were alive and 2 patients had died of disease. The mean time for bone union was 9 months (range, 6 to 12 months). Graft hypertrophy was evident in all patients at 12 months. The median Musculoskeletal Tumor Society (MSTS) score at the time of the final follow-up was 80% (range, 60% to 96.6%). Seven patients had complications. Three complications required reoperation: 1 deep infection, 1 hematoma, and 1 wound dehiscence. Three patients had disease relapse in terms of lung metastases.

CONCLUSIONS

This reconstruction method can achieve a high rate of bone union and can provide good functional outcomes following resection of pediatric pelvic Ewing sarcomas with iliosacral involvement. Complications are usually manageable without a need for revision surgical procedures.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Limb-salvage reconstruction following resection of pelvic bone sarcomas involving the acetabulum

AIMS

Limb salvage for pelvic sarcomas involving the acetabulum is a major surgical challenge. There remains no consensus about what is the optimum type of reconstruction after resection of the tumour. The aim of this study was to evaluate the surgical outcomes in these patients according to the methods of periacetabular reconstruction.

METHODS

The study involved a consecutive series of 122 patients with a periacetabular bone sarcoma who underwent limb-salvage surgery involving a custom-made prosthesis in 65 (53%), an ice-cream cone prosthesis in 21 (17%), an extracorporeal irradiated autograft in 18 (15%), and nonskeletal reconstruction in 18 (15%).

RESULTS

The rates of major complications necessitating further surgery were 62%, 24%, 56%, and 17% for custom-made prostheses, ice-cream cone prostheses, irradiated autografts and nonskeletal reconstructions, respectively (p = 0.001). The ten-year cumulative incidence of failure of the reconstruction was 19%, 9%, 33%, and 0%, respectively. The major cause of failure was deep infection (11%), followed by local recurrence (6%). The mean functional Musculoskeletal Tumour Society (MSTS) scores were 59%, 74%, 64%, and 72%, respectively. The scores were significantly lower in patients with major complications than in those without complications (mean 52% (SD 20%) vs 74% (SD 19%); p < 0.001). For periacetabular resections involving the ilium, the mean score was the highest with custom-made prostheses (82% (SD 10%)) in patients without any major complication; however, nonskeletal reconstruction resulted in the highest mean scores (78% (SD 12%)) in patients who had major complications. For periacetabular resections not involving the ilium, significantly higher mean scores were obtained with ice-cream cone prostheses (79% (SD 17%); p = 0.031).

CONCLUSION

Functional outcome following periacetabular reconstruction is closely associated with the occurrence of complications requiring further surgery. For tumours treated with periacetabular and iliac resection, skeletal reconstruction may result in the best outcomes in the absence of complications, whereas nonskeletal reconstruction is a reasonable option if the risk of complications is high. For tumours requiring periacetabular resection without the ilium, reconstruction using an ice-cream cone prosthesis supported by antibiotic-laden cement is a reliable option. Cite this article: Bone Joint J 2021;103-B(4):795-803.

Pelvic Chondrosarcoma Treated by En Bloc Resection with Patient-Specific Osteotomy Guides and Reimplantation of the Extracorporeally Irradiated Bone as an Osseocartilaginous Structural Orthotopic Autograft: A Report of Two Cases with Description of the Surgical Technique

Primary tumors of the pelvis are considered difficult to treat due to the complex anatomy and the proximity of important neurovascular structures. The surgical armamentarium for the treatment of these tumors has evolved with the help of cutting-edge technology from debilitating hemipelvectomies to solutions such as precise resections guided by patient-specific instruments or computer navigation and reconstruction by modular prostheses, 3D-printed custom-made implants, or orthotopic autograft reimplantation after extracorporeal irradiation. Different combinations of these techniques have been described in the literature with various rates of success. We present two cases of pelvic chondrosarcomas successfully treated by a combination of periacetabular resection with patient-specific osteotomy guides and orthotopic reimplantation of the extracorporeally irradiated autograft resulting in retention of the native hip.

Pelvic reconstruction using an ice-cream cone prosthesis: correlation between the inserted length of the coned stem and surgical outcome

BACKGROUND

Acetabular reconstruction using an ice-cream cone prosthesis has been a reliable reconstruction option following pelvic tumour resection. However, it remains unknown which factor determines the success of this procedure. We aimed to determine risk factors for complications and functional loss in acetabular reconstruction using an ice-cream cone prosthesis.

PATIENTS AND METHODS

Fifty-four patients with malignant bone tumours who underwent acetabular reconstruction using an ice-cream cone prosthesis between 2004 and 2016 were studied. The bone-stem ratio was calculated as the ratio of the inserted length into the bone per the entire stem length.

RESULTS

A total of 26 (48%) patients had at least one complication and 11 patients (20%) required surgical interventions. The complication rates were 71% and 40% with a bone-stem ratio ≤ 50% and > 50%, respectively (p = 0.026), and the bone-stem ratio significantly stratified the risk of complications (≤ 50%: OR, 4.67 versus > 50%; p = 0.048). The mean MSTS score at the final follow-up was 60% (range 23-97%): the scores were significantly lower in patients with complications/leg-length discrepancy (52%) than in those without (79%; p = 0.002). The mean score with a bone-stem ratio ≤ 50% was significantly lower than the score with a ratio > 50%, especially in patients who underwent non-navigated reconstructions (33% versus 64%; p = 0.001).

CONCLUSION

The inserted length of the coned stem into residual bone was predictive of complications and functional outcome. Surgical indication for this procedure should be considered with the size of the remaining ilium to stabilise the prosthesis with a coned stem longer than half length.

Surgical Treatment and Proposed Modified Classification for Harrington Class III Periacetabular Metastases

Objectives

This study aims to: (i) evaluate the outcome of patients with Harrington class III lesions who were treated according to Harrington classification; (ii) propose a modified surgical classification for Harrington class III lesions; and (iii) assess the efficiency of the proposed modified classification.

Methods

This study composes two phases. During phase 1 (2006 to 2011), the clinical data of 16 patients with Harrington class III lesions who were treated by intralesional excision followed by reconstruction of antegrade/retrograde Steinmann pins/screws with cemented total hip arthroplasty (Harrington/modified Harrington procedure) were retrospectively reviewed and further analyzed synthetically to design a modified surgical classification system. In phase 2 (2013 to 2019), 62 patients with Harrington class III lesions were classified and surgically treated according to our modified classification. Functional outcome was assessed using the Musculoskeletal Tumor Society (MSTS) 93 scoring system. The outcome of local control was described using 2‐year recurrence‐free survival (RFS). Owing to the limited sample size, we considered P < 0.1 as significant.

Results

In phase 1, the mean surgical time was 273.1 (180 to 390) min and the mean intraoperative hemorrhage was 2425.0 (400.0 to 8000.0) mL, respectively. The mean follow‐up time was 18.5 (2 to 54) months. Recurrence was found in 4 patients and the 2‐year RFS rate was 62.4% (95% confidence interval [CI] 31.6% to 93.2%). The mean postoperative MSTS93 score was 56.5% (20% to 90%). Based on the periacetabular bone destruction, we categorized the lesions into two subgroups: with the bone destruction distal to or around the inferior border of the sacroiliac joint (IIIa) and the bone destruction extended proximal to inferior border of the sacroiliac joint (IIIb). Six patients with IIIb lesions had significant prolonged surgical time (313.3 vs 249.0 min, P = 0.022), massive intraoperative hemorrhage (3533.3 vs 1760.0 mL, P = 0.093), poor functional outcome (46.7% vs 62.3%, P = 0.093), and unfavorable local control (31.3% vs 80.0%, P = 0.037) compared to the 10 patients with IIIa lesions. We then modified the surgical strategy for two subgroup of class III lesions: Harrington/modified Harrington procedure for IIIa lesions and en bloc resection followed by modular hemipelvic endoprosthesis replacement for IIIb lesions. Using the proposed modified surgical classification, 62 patients in the phase 2 study demonstrated improved surgical time (245.3 min, P = 0.086), intraoperative hemorrhage (1466.0 mL, P = 0.092), postoperative MSTS 93 scores (65.3%, P = 0.067), and 2‐year RFS rate (91.3%, P = 0.002) during a mean follow‐up time of 19.9 (1 to 60) months compared to those in the phase 1 study.

Conclusion

The Harrington surgical classification is insufficient for class III lesions. We proposed modification of the classification for Harrington class III lesions by adding two subgroups and corresponding surgical strategies according to the involvement of bone destruction. Our proposed modified classification showed significant improvement in functional outcome and local control, along with acceptable surgical complexity in surgical management for Harrington class III lesions.

Risk factors for early dislocation of the hip after periacetabular tumour resection and endoprosthetic reconstruction of the hemipelvis

AIMS

There is an increased risk of dislocation of the hip after the resection of a periacetabular tumour and endoprosthetic reconstruction of the defect in the hemipelvis. The aim of this study was to determine the rate and timing of dislocation and to identify its risk factors.

METHODS

To determine the dislocation rate, we conducted a retrospective single-institution study of 441 patients with a periacetabular tumour who had undergone a standard modular hemipelvic endoprosthetic reconstruction between 2003 and 2019. After excluding ineligible patients, 420 patients were enrolled. Patient-specific, resection-specific, and reconstruction-specific variables were studied using univariate and multivariate analyses.

RESULTS

The dislocation rate was 9.3% (n = 41). Dislocation was most likely to occur in the first three months after surgery. Four independent risk factors were found, one of which was older age at operation (p = 0.039). The odds ratios (ORs) of those aged ≥ 60 years and 30 to 60 years were 8.50 and 4.64, respectively, compared with those aged < 30 years. The other three risk factors were resection of gluteus maximus (p = 0.010, OR = 5.8), vertical shift of the centre of rotation (COR) of the hip by ≥ 20 mm (p = 0.008, OR = 3.60), and a type I+II+III pelvic resection (p = 0.014, OR = 3.04).

CONCLUSION

Hemipelvic endoprosthetic reconstruction after resection of a periacetabular tumour has a dislocation rate of 9.3% (n = 41). Patients are most likely to dislocate in the first three months after surgery. The risk is increased for older patients (especially those aged > 60 years) and for those with gluteus maximus resection, vertical shift of the COR ≥ 20 mm, and a type I+II+III pelvic resection. Cite this article: Bone Joint J 2021;103-B(2):382-390.

Comparison of reconstructive techniques after acetabular resection for pelvic chondrosarcoma

AIMS

Hip reconstruction after resection of a periacetabular chondrosarcoma is complex and associated with a high rate of complications. Previous reports have compared no reconstruction with historical techniques that are no longer used. The aim of this study was to compare the results of tantalum acetabular reconstruction to both historical techniques and no reconstruction.

METHODS

We reviewed 66 patients (45 males and 21 females) with a mean age of 53 years (24 to 81) who had undergone acetabular resection for chondrosarcoma. A total of 36 patients (54%) underwent acetabular reconstruction, most commonly with a saddle prosthesis (n = 13; 36%) or a tantalum total hip arthroplasty (THA) (n = 10; 28%). Mean follow-up was nine years (SD 4).

RESULTS

There was no difference in the mean age (p = 0.63), sex (p = 0.110), tumour volume (p = 0.646), or type of resection carried out (p > 0.05) between patients with and without reconstruction. Of the original 66 patients, 61 (92%) were ambulant at final follow-up. There was no difference in the proportion of patients who could walk in the reconstruction and 'no reconstruction' groups (p = 0.649). There was no difference in the mean Musculoskeletal Tumor Society (MSTS) score between patients who were reconstructed and those who were not (61% vs 56%; p = 0.378). Patients with a tantalum THA had a significantly (p = 0.015) higher mean MSTS score (78%) than those who were reconstructed with a saddle prosthesis (47%) or who had not been reconstructed (56%). Patients who had undergone reconstruction were more likely to have complications (81% vs 53%; p = 0.033).

CONCLUSION

Reconstruction after resection of the acetabulum is technically demanding. In selected cases, reconstruction is of benefit, especially when reconstruction is by tantalum THA; however, the follow-up for these patients remains mid-term. When not feasible, patients with no reconstruction have an acceptable functional outcome. Level of Evidence: Level III Therapeutic. Cite this article: Bone Joint J 2021;103-B(2):391-397.

Unrecognized Chondrosarcoma as a Cause of Total Hip Arthroplasty Failure

Background

Total hip arthroplasty (THA) is one of the most successful procedures in orthopedic surgery. The most frequent THA indications are osteoarthritis and avascular necrosis, whereas symptomatic aseptic loosening is the most common indication to revision surgery. Chondrosarcoma (CS) is the most frequent bone sarcoma in adults, and proximal femur is the most prevalent location. Wide resection is the treatment of choice.We report 3 cases of unrecognized high-grade CS in the setting of primary or revision THA and reviewed the literature on this rare clinical presentation.

Methods

A systematic literature review on CS in the setting of THA, published between 1980 and 2020, was performed on PubMed, Embase, Medline, Ovid SP, and Web of Science, using the guidelines set in the Preferred Reporting Items for Systematic Reviews and Mata-analyses (PRISMA).

Results

Case series: Three patients were referred to our sarcoma center after failure of THA due to unrecognized high-grade CS. All 3 had rapid fatal outcome. Literature review: Fifty-nine articles were identified, of which 8 were included in the study. They confirmed that primary or revision THA failure due to unrecognized CS is extremely rare, with only few cases reported in the literature.

Conclusions

Before proceeding to primary or revision arthroplasty, diagnosis must be ascertained. Atypical presentation of a common pathology, such as osteoarthritis, avascular necrosis, or aseptic loosening of an endoprosthesis, should raise suspicion for another cause to symptoms, and additional workup be performed. As our cases demonstrated, unrecognized or inadequately managed bone sarcoma may lead to poor or even fatal outcome.

Reconstruction after periacetabular tumor resection with Lumic® endoprosthesis: What are the midterm results?

INTRODUCTION

This study aimed to analyze the midterm outcomes of LUMiC® endoprosthetic reconstruction following periacetabular resection of primary bone sarcomas and carcinoma metastases.

PATIENTS AND METHODS

We retrospectively reviewed the charts of 21 patients (11 male [52.3%], 10 female [47.6%]; mean age 47 ± 16 years) for whom a LUMiC® endoprosthesis (Implantcast) was used to reconstruct a periacetabular defect after internal hemipelvectomy. The tumor was pathologically diagnosed as Ewing's sarcoma in six (28.5%), chondrosarcoma in 10 (47.6%), and bone metastasis from carcinoma in five (23.8%) patients.

RESULTS

The median follow-up of patients was 57.8 months (95% confidence interval: 51.9-63.7). The implant survival rate at 1, 2, and 5 years were 95.2%, 85.7%, and 80.9%, respectively. The overall complication rate was 33.3% (n = 7). Four (19%) complications resulted in reconstruction failure. Total reoperation rate was 28.5% (n = 6). The complications were soft tissue failure/dislocation in two patients, aseptic loosening in one, infection in two, and local recurrence in two. At the time of study, seven patients were alive with no evidence of disease, seven were alive with disease, and seven died of disease. The 5-year overall survival rate and local recurrence-free survival rates were 67% and 76%, respectively. The median Musculoskeletal Tumor Society score at final follow-up was 70% (range: 50%-86.6%).

CONCLUSION

We conclude that LUMiC® endoprosthesis provides good functional outcomes and a durable reconstruct. Even though this reconstruction method presents some complications, it provides a stable pelvis in the management of periacetabular malignant tumors.

What are the Complications of Three-dimensionally Printed, Custom-made, Integrative Hemipelvic Endoprostheses in Patients with Primary Malignancies Involving the Acetabulum, and What is the Function of These Patients?

BACKGROUND

Functional reconstruction after resection of pelvic malignancies involving the acetabulum remains challenging. Numerous reconstruction methods have been proposed, but they are generally associated with mechanical and nonmechanical complications. To improve the function of patients with primary malignancies of the acetabulum after internal hemipelvectomy and reduce the complication rate after this procedure, we designed a series of three-dimensionally (3D) printed, custom-made, integrative hemipelvic endoprostheses with a porous structure and wanted to present the early results of using this construct to determine whether it could be considered a reasonable reconstruction option.

QUESTIONS/PURPOSES

We performed this study to (1) evaluate, in a small group of patients, whether the new endoprosthesis restores short-term lower-limb function; (2) identify short-term complications associated with the use of this endoprosthesis; and (3) assess osseointegration between the host bone and the 3D-printed integrative hemipelvic endoprosthesis with a porous structure.

METHODS

Between October 2016 and May 2017, our center treated 26 patients with malignancies involving the acetabulum. Thirteen of these patients received hemipelvic replacement with a 3D-printed, custom-made, integrative endoprosthesis, six received hemipelvic replacement with a modular endoprosthesis, four received radiotherapy, and three received external hemipelvectomy. Resection and reconstruction with a 3D-printed, custom-made, integrative endoprosthesis were indicated if the resection margin was the same as that achieved in hemipelvectomy, if reconstruction would preserve reasonable function after resection, if the patient had a good physical status and life expectancy longer than 6 months, and if the patient was willing to accept the potential risk of a 3D-printed, custom-made, endoprosthesis. The exclusion criteria were an inability to achieve a satisfactory surgical margin with limb salvage, inability to preserve the function of the limb because of tumor involvement of the sacral nerve or sciatic nerve, and unresectable and/or widely metastatic disease on presentation. Pain and function were evaluated with the 10-cm VAS score (range 0 to 10; a lower score is desirable), the 1993 version of the Musculoskeletal Tumor Society (MSTS-93) score (range 0 to 30; a higher score is desirable), and the Harris hip score ([HHS]; range 0 to 100; a higher score is desirable) were evaluated preoperatively and at a median of 27 months after reconstruction (range 24 to 31 months). The functional scores and complications were recorded after reviewing the patients' records. Osseointegration was assessed with digital tomosynthesis by two senior surgeons. We observed the trabecular structures connected to the implant surface to assess whether there was good osseointegration.

RESULTS

The median preoperative VAS score, MSTS-93 score, and HHS were 5 (range 2 to 8), 14 (range 3 to 18), and 64 (range 20 to 76) points, respectively. At the latest follow-up interval, the median VAS score, MSTS-93 score, and HHS were 2 (range 0 to 6), 23 (range 15 to 27), and 82 (range 44 to 93) points, respectively. No deep infection, dislocation, endoprosthetic breakage, aseptic loosening, or local recurrence occurred. Two patients experienced delayed wound healing; the wounds healed after débridement. Using digital tomography, we found that all implants were well-osseointegrated at the final follow-up examination.

CONCLUSIONS

A 3D-printed, custom-made, integrative hemipelvic endoprosthesis provides acceptable early outcomes in patients undergoing pelvic reconstruction. Osseointegration is possible, and we anticipate this will lead to biologic stability with a longer follow-up interval. The custom-made integrative design ensured precise implantation. Although a few patients in this study had only a short follow-up duration, the functional results were reasonable. We have observed no major complications so far, but this was a very small series and we caution that these are large reconstructions that will certainly result in complications for some patients. Our method uses a precise preoperative simulation and endoprosthesis design to aid the surgeon in performing challenging operations. If our early results are confirmed with more patients and longer follow-up and are replicated at other centers, this may be a reconstruction option for patients with periacetabular malignancies.

LEVEL OF EVIDENCE

Level IV, therapeutic study.

Use of dual mobility components in total hip arthroplasty: Indications and outcomes

Instability after total hip arthroplasty (THA) can be a problematic complication and remains one of the leading causes of revision surgery in the early post-operative period. Dual mobility (DM) implants decrease dislocation risk after THA but they come with their own set of complications. Selective use of DM implants for THA in high risk groups can confer the advantages of this construct while mitigating the risks. In this paper, we review the current literature to examine the evidence for or against use of DM implants in various clinical scenarios and provide an algorithm for when to consider using DM design construct in THA.

Adolescent pelvic chondrosarcoma, surgical treatment, and unusual reconstruction with pedestal conic cup (LUMiC®): A case report

An 18-year-old male patient was diagnosed pelvic chondrosarcoma histopathologically. Hip joint involvement was detected. No metastasis or neurovascular invasion was seen. Type I+II pelvic resection and hip reconstruction were planned with pedestal cup (LUMiC®) and proximal femur tumor prosthesis. Surgery was performed in lateral decubitus position with extensive triradiate incision. Pelvic wide resection was performed. At the second year of follow-up, implant failure was detected and patient was revised with same pedestal cup. Axial stability was supported by a L5 screw and connector from L5 vertebrae to LUMiC® prosthesis. Except the implant failure, no oncological complication or infection was observed during the final 36^th month follow-up.

3D-Printed Modular Hemipelvic Endoprosthetic Reconstruction Following Periacetabular Tumor Resection: Early Results of 80 Consecutive Cases

BACKGROUND

Reconstruction with an endoprosthesis following pelvic tumor resection has increased over the years. However, the long-term results reflect a disappointing frequency of mechanical complications and failures. In an attempt to enhance implant fixation, an electron beam melting (EBM)-based modular hemipelvic endoprosthesis was introduced. Our aim was to explore the preliminary clinical outcomes for patients who have been managed with this prosthesis.

METHODS

We reviewed the records of 80 consecutive patients who had been managed at a single center between June 2015 and September 2017. Chondrosarcoma was the predominant diagnosis (31.3%). Osseous metastases were diagnosed in 16 patients (20.0%). The position of the reconstructed metallic acetabulum was measured on an anteroposterior pelvic radiograph. Bone ingrowth was evaluated in 2 samples harvested from patients with tumor recurrence.

RESULTS

After a median duration of follow-up of 32.5 months (range, 9 to 52 months), no acetabular component instability was detected on radiographs. Histological sectioning of specimens harvested from 2 patients with tumor recurrence showed bone trabeculae extending toward the implant and bone ingrowth within the porous network. At the time of the latest follow-up, 59 patients (73.8%) were alive with no evidence of disease, 5 patients (6.3%) were alive with disease, and 16 patients (20.0%) had died of disease. Local recurrence occurred in 9 patients (11.3%). The mean Musculoskeletal Tumor Society score at the time of the latest follow-up was 83.9% (range, 43% to 100%). Complications occurred in 16 patients (20%), with wound dehiscence being the most common complication (8 patients; 10%). No aseptic loosening was found. Five patients (6.3%) had deep infection, and 2 patients (2.5%) had dislocation.

CONCLUSIONS

The use of a 3-dimensional (3D)-printed modular hemipelvic endoprosthesis with a highly porous metal interface represents a potential choice as a pelvic endoprosthesis after internal hemipelvectomy for the treatment of a primary or metastatic tumor. These preliminary results demonstrate stable fixation with acceptable early functional and radiographic outcomes.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Internal Hemipelvectomy and Reconstruction Assisted by 3D Printing Technology Using Premade Intraoperative Cutting and Placement Guides in a Patient With Pelvic Sarcoma: A Case Report

CASE

We describe the case of a 75-year-old patient diagnosed with high-grade epithelioid hemangioendothelioma in the left hemipelvis. She underwent an internal hemipelvectomy, followed by reconstruction with a tumor prosthesis with iliac anchorage using 3D-printed cutting and placement guides. Eighteen months postoperatively, she is pain-free and walks without appliances.

CONCLUSIONS

Using 3D-printed guides could be an appropriate alternative for patients with aggressive bone tumors in the pelvic area that require hemipelvectomy and reconstruction using a prosthesis with iliac anchorage. 3D-printed cutting guides allow precise resection with appropriate margins, could reduce the risk of injuring critical structures, and facilitate proper prosthetic component positioning.

Analysis of principles inspiring design of three-dimensional-printed custom-made prostheses in two referral centres

BACKGROUND

Three-dimensional (3D) printing is an emerging technology used in numerous medical fields. Reconstruction of large bone defects after tumor resections or complex revision surgeries is challenging especially in specific sites where modular prostheses are not available. The possibility to realize custom-made 3D-printed prostheses improves their application in surgical field despite the complication rate, gaining a lot of attention for potential benefits.

OBJECTIVES

We asked: (1) What are the emerging indications and designs of 3D-printed prostheses for complex bone reconstructions? (2) What complications occur with the use of custom implants considering site?

STUDY DESIGN AND METHODS

We performed a retrospective analysis of every patient in whom a custom-made 3D-printed prosthesis was used to reconstruct a bone defect after resection for a bone tumour or challenging revision surgery from 2009 to 2018 in two referral centres. Forty-one patients (11 males [27%], 30 females [73%]) with a mean age of 41 years (range, 10-78 years) were included. Our general indications for using these implants were complex reconstructions of massive bone defects, in the absence of available modular prostheses. Seven were non-oncologic patients, whereas 24 patients were mainly treated for their malignant bone tumours. Custom-made 3D-printed prostheses were used in pelvis (29), forearm (6), scapula (2), distal tibia (2), calcaneus (1), and femoral diaphysis (1). The reconstruction included complete articular replacement in 24 cases (58%) whereas a combined spinopelvic implant has been used in two cases. Flaps were used in 25 cases (61%). Statistical analyses include Kaplan-Meier curves of survival.

RESULTS

The mean follow-up was 20 months. In the oncologic group, overall survival was 89% at five year follow-up and only three patients died of disease. Only one patient required implant removal due to deep infection. Overall major and minor complication rate was 22% (14 complications in 9/41 patients), mainly wound-related problems. One patient reported a periprosthetic fracture, one had hip dislocation, and four (12% [4/34 cases]) had local recurrence. Mean MSTS functional outcome score at follow-up was 73% (range, 23-100%), with a full weight bearing at an average time of 73 days from surgery of lower limbs.

CONCLUSIONS

Custom-made 3D-printed prostheses represent at today a promising reconstructive technique, maintaining however the correct indications for their use in musculoskeletal oncology and challenging revision surgery. Complication rate is acceptable, with infection and wound healing problems relatively common after complex pelvic reconstructions. We will continue to follow our patients over the longer term to ascertain the role of these implants; however, larger studies will need to confirm indications and control for prognostic factors.