Surface Modification of Polystyrene Thin Films by RF Plasma Treatment

Investigating the effect of gliding discharge plasma on polystyrene and Polyamide6 by positron annihilation lifetime spectroscopy

Polymers are widely used today and the changes in their properties are investigated by different methods such as plasma irradiation. One of the most important methods for modifying polymers is cold plasma, by which the surface properties of the polymers can be changed under atmospheric pressure. In this study, the effect of plasma on Polystyrene (PS) and Polyamide 6 (PA6) samples was investigated. Surface and depth changes of the PS and PA6 have been investigated by various experimental techniques such as Fourier Transform Infrared (FTIR), X-ray Diffraction (XRD), Field Emission Scanning Electron Microscope (FESEM), Contact Angle (CA), and Positron Annihilation Lifetime Spectroscopy (PALS). The results of Attenuated Total Reflectance (ATR)-FTIR show that the chemical bonds of PA6 have been changed, and preserved in PS in the depths. The XRD results show that there are no volume changes for chemical bands. The FESEM analysis results reveal that the plasma causes digging and creates roughness on the surface. The CA measurement confirms the FESEM results and points out an increase in hydrophobicity after plasma processing. The PALS results indicate that the free volumes of the matter are changed after plasma irradiation in the depths of PS and PA6. In addition, the plasma also causes changes in the micrometer depth.

Microwave resonator-based sensor system for specific antibody detection

An antibody-detecting sensor is described that is based on a microwave electrodynamic resonator. A polystyrene film with immobilized bacteria deposited on a lithium niobate plate was placed at one end of the resonator and was used as the sensing element. The second end was electrically shorted. The frequency and depth of the reflection coefficient S11 for three resonances in the range 6.5-8.5 GHz were used as an analytical signal to examine antibody interactions with bacteria and determine the time required for cell immobilization. The sensor distinguished between situations in which bacteria interacted with specific antibodies and those in which no such interaction occurred (control). Although the cell-antibody interaction changed the frequency and depth of the second and third resonance peaks, the parameters of the first resonance peak did not change. The interaction of cells with nonspecific antibodies did not change the parameters of any of the peaks. These results are promising for use in the design of methods to detect specific antibodies, which can supplement the existing methods of antibody analysis.

Polymeric membranes for environmental remediation: A product space model perspective

The development of polymeric membranes from polymers such as polystyrene (PS), polyvinylchloride (PVC), and their associated family has brought great momentum to the environmental remediation universe, mainly due to their surprisingly diverse and multi-purpose nature. Their usage has surged 20 times in the last half-century and is likely to double again in the coming 20 years. As a result, the polymeric materials economy and commercialization of research become increasingly important as a possible option for a country to boost prosperity while decreasing its reliance on limited raw resources and mitigating negative externalities. This transformation demands a systematic strategy, which involves progress beyond improving the existing models and building new avenues for collaboration. In this work, a sophisticated system, i.e., product space model (PSM), has been presented, explicitly appraising the opportunity space for United Kingdom, Italy, Poland, India, Canada, Indonesia, Brazil, Saudi Arabia, Russia and Colombia for their potential future industrialization and commercialization of polymeric membranes for environmental remediation. The results revealed that UK, Italy, Poland and India are at advantageous positions owing to their close proximity of (distance<2) and their placement in Parsimonious policy, which is the most desired quadrant of Policy Map of PSM, Canada and Indonesia have medium level opportunities, while Russia and Saudi Arabia have opportunities with more challenges to fully exploit the unexploited polymers products in terms of membranes for environmental remediation and prove favorable for export diversification, sustainable economic growth, and commercialization.

Cytotoxicity of nanomixture: Combined action of silver and plastic nanoparticles on immortalized human lymphocytes

BACKGROUND

Silver nanoparticles (AgNP) are one of the most commercialized types of nanomaterials, with a wide range of applications owing to their antimicrobial activity. They are particularly important in hospitals and other healthcare settings, where they are used to maintain sterility of surfaces, textiles, catheters, medical implants, and more. However, AgNP can not only harm bacteria, but also damage mammalian cells and tissue. While the potential toxicity of AgNP is an understood risk, there is a lack of data on their toxicity in combination with polymeric materials, especially plastic nanoparticles such as polystyrene nanoparticles (PSNP) that can be released from surfaces of polystyrene devices during their medical use.

AIM

This study aimed to investigate combined effect of AgNP and nanoplastics on human immune response.

METHODS

Cells were treated with a range of PSNP and AgNP concentrations, either applied alone or in combination. Cytotoxicity, induction of apoptosis, generation of oxidative stress, uptake efficiency, intracellular localization and nanomechanical cell properties were selected as exposure biomarkers.

RESULTS

Collected experimental data showed that nanomixture induced oxidative stress, apoptosis and mortality of Jurkat cells stronger than its individual components. Cell treatment with AgNP/PSNP mixture also significantly changed cell mechanical properties, evidenced by reduction of cells' Young Modulus.

CONCLUSION

AgNP and PSNP showed additive toxic effects on immortalized human lymphocytes, evidenced by increase in cellular oxidative stress, induction of apoptosis, and reduction of cell stiffness. These results have important implications for using AgNP and PSNP in medical contexts, particularly for long-term medical implants.

The Evolution of Polystyrene as a Cell Culture Material

Polystyrene (PS) has brought in vitro cell culture from its humble beginnings to the modern era, propelling dozens of research fields along the way. This review discusses the development of the material, fabrication, and treatment approaches to create the culture material. However, native PS surfaces poorly facilitate cell adhesion and growth in vitro. To overcome this, liquid surface deposition, energetic plasma activation, and emerging functionalization methods transform the surface chemistry. This review seeks to highlight the many potential applications of the first widely accepted polymer growth surface. Although the majority of in vitro research occurs on two-dimensional surfaces, the importance of three-dimensional (3D) culture models cannot be overlooked. The methods to transition PS to specialized 3D culture surfaces are also reviewed. Specifically, casting, electrospinning, 3D printing, and microcarrier approaches to shift PS to a 3D culture surface are highlighted. The breadth of applications of the material makes it impossible to highlight every use, but the aim remains to demonstrate the versatility and potential as both a general and custom cell culture surface. The review concludes with emerging scaffolding approaches and, based on the findings, presents our insights on the future steps for PS as a tissue culture platform.

Plasma surface modification of polymers for sensor applications

Polymeric sensors play an increasingly important role in monitoring the environment we live in, providing relevant information for a host of applications.