Bioremediation of petroleum hydrocarbons from crude oil-contaminated soil with the earthworm: Hyperiodrilus africanus

Current trends in bioremediation and bio-integrated treatment of petroleum hydrocarbons

Petroleum hydrocarbons and their derivatives constitute the leading group of environmental pollutants worldwide. In the present global scenario, petroleum and natural gas production, exploration, petroleum refining, and other anthropogenic activities produce huge amounts of hazardous petroleum wastes that accumulate in the terrestrial and marine environment. Due to their carcinogenic, neurotoxic, and mutagenic characteristics, petroleum pollutants pose severe risks to human health and exert ecotoxicological effects on the ecosystems. To mitigate petroleum hydrocarbons (PHs) contamination, implementing "green technologies" for effective cleanup and restoration of an affected environment is considered as a pragmatic approach. This review provides a comprehensive outline of newly emerging bioremediation technologies, for instance; nanobioremediation, electrokinetic bioremediation, vermiremediation, multifunctional and sustainably implemented on-site applied biotechnologies such as; natural attenuation, biostimulation, bioaugmentation, bioventing, phytoremediation and multi-process hybrid technologies. Additionally, the scope of the effectiveness and limitations of individual technologies in treating the petroleum hydrocarbon polluted sites are also evaluated.

Trophodynamics and health risk assessment of heavy metals in seafood from a tropical estuary in the gulf of Guinea

Seafood is an essential protein source for coastal communities. However, they can accumulate heavy metals from human activities which could pose a potential health risk to consumers. In this study, we investigated the distribution, bioaccumulation, trophic transfer and potential human health risk of heavy metals in sediments, shell and fin fish collected from the Escravos Estuary in southern Nigeria. Heavy metals (Ni, Cd, V, Pb and Cu) in sediments, periwinkles and tongue soles from the two study sites were lower than the permissible limits for fishery products. The metal distribution in fish tissues was in the decreasing order of liver > gills > muscles > gonads > rest of the fish. Moderate to high BSAF (>1) was reported for Cd, Pb and Cu. All the studied metals, except Pb, showed evidence of biomagnification from periwinkle to tongue sole. The estimated daily intake (EDI) and hazard ratio (HR) for metals in periwinkles from both study sites were lower or within the USEPA reference doses (RfD) for the respective daily intake and HR value < 1, except for Cd, V and Pb for children. In contrast, EDI values in the muscle of tongue soles were higher than the RfD values for heavy metals except for Ni and Pb, whereas HR values > 1 except for Ni, Cd and V. In the whole fish, EDI and HR values were disproportionately high in both study sites with higher values reported for children. This study provides the first insights on the trophic transfer and risk assessment of heavy metals from petroleum and gas operations impacting the Escravos Estuary and the implications to public health.

Phytoremediation of pollutants in oil-contaminated soils by Alhagi camelorum: evaluation and modeling

Phytoremediation is a cost-effective and environmentally friendly method, offering a suitable alternative to chemical and physical approaches for the removal of pollutants from soil. This research explored the phytoremediation potential of Alhagi camelorum, a plant species, for total petroleum hydrocarbons (TPHs) and heavy metals (HMs), specifically lead (Pb), chromium (Cr), nickel (Ni), and cadmium (Cd), in oil-contaminated soil. A field-scale study spanning six months was conducted, involving the cultivation of A. camelorum seeds in a nursery and subsequent transplantation of seedlings onto prepared soil plots. Control plots, devoid of any plants, were also incorporated for comparison. Soil samples were analyzed throughout the study period using inductively coupled plasma-optical emission spectroscopy (ICP‒OES) for HMs and gas chromatography‒mass spectrometry (GC‒MS) for TPHs. The results showed that after six months, the average removal percentage was 53.6 ± 2.8% for TPHs and varying percentages observed for the HMs (Pb: 50 ± 2.1%, Cr: 47.6 ± 2.5%, Ni: 48.1 ± 1.6%, and Cd: 45.4 ± 3.5%). The upward trajectory in the population of heterotrophic bacteria and the level of microbial respiration, in contrast to the control plots, suggests that the presence of the plant plays a significant role in promoting soil microbial growth (P < 0.05). Moreover, kinetic rate models were examined to assess the rate of pollutant removal. The coefficient of determination consistently aligned with the first-order kinetic rate model for all the mentioned pollutants (R2 > 0.8). These results collectively suggest that phytoremediation employing A. camelorum can effectively reduce pollutants in oil-contaminated soils.

Seasonal variations in the distribution of aliphatic hydrocarbons in surface sediments from the Selangor River, Peninsular Malaysia's West Coast

The seasonal variation of petroleum pollution including n-alkanes in surface sediments of the Selangor River in Malaysia during all four climatic seasons was investigated using GC-MS. The concentrations of n-alkanes in the sediment samples did not significantly correlate with TOC (r = 0.34, p > 0.05). The concentrations of the 29 n-alkanes in the Selangor River ranged from 967 to 3711 µg g-1 dw, with higher concentrations detected during the dry season. The overall mean per cent of grain-sized particles in the Selangor River was 85.9 ± 2.85% sand, 13.5 ± 2.8% clay, and 0.59 ± 0.34% gravel, respectively. n-alkanes are derived from a variety of sources, including fresh oil, terrestrial plants, and heavy/degraded oil in estuaries. The results of this study highlight concerns and serve as a warning that hydrocarbon contamination is affecting human health. As a result, constant monitoring and assessment of aliphatic hydrocarbons in coastal and riverine environments are needed.

Bioaccumulation for heavy metal removal: a review

This paper reviews plants and microorganisms removal of heavy metals from contaminated sites through bioaccumulation. Increased industrial activities have led to the uncontrolled release of metals into the environment, resulting in a global increase in metal pollution. Heavy metals are also consumed from the surface of glasses over a prolonged period of use. Heavy metal pollution is a serious problem that can have wide-ranging and long-lasting impacts on human health and the environment. Therefore, effective removal and remediation of heavy metal pollution are crucial to protect human and ecological health. Traditional methods of heavy metal removal, such as chemical treatment and physical removal, can be costly and can also have negative impacts on the environment. The utilization of plants and microorganisms for bioremediation of metal-polluted environments has proven effective for removing metals through accumulation and/or detoxification. This method is effective, economical, versatile, and environmentally friendly. Bioaccumulation utilizes plants and microorganisms to absorb and remove heavy metals from contaminated sites. This method is not only cost-effective but also helps to minimize the environmental impact of heavy metal pollution. Additionally, bioaccumulation can be used in combination with other techniques, such as phytostabilization and phytodegradation, to further improve the efficiency of heavy metal removal. The paper also discusses the use of plants and microorganisms in the removal of heavy metals from water and soil through biomagnification and bioconcentration. Techniques such as phytoaccumulation, phytostimulation, phytodegradation, phytovolatilization, phytostabilization, and phytofiltration are also discussed as effective ways of remediation of heavy metal contaminated sites.

Effect of crude oil exploration and exploitation activities on soil, water and air in a Nigerian community

The continuous degradation of environmental ecosystems (land, water and soil) resulting from crude oil exploration and exploitation activities continues to gain global attention. This study investigates the effects of crude oil exploration and exploitation activities on soil, water and air in the study area. Soil samples were collected in three replicates at depths of 0-15 and 15-30 cm at sampling distances of 20, 100 and 200 m a from core oil exploitation operation area and a control point. Water samples were also taken from within the study area and analyzed using standard procedures. Major pollutants concentrations of particulate matter (PM_2.5 and PM₁₀) of the air were also measured using Air Quality Index (AQI). The results reveal that the soil, water and air parameters measured mostly at 20 m from the core oil operation area compromise the allowable standards provided for healthy living. In the same manner, some results at 100 and 200 m were slightly higher than the recommended values in some cases of heavy metals and bacteria activities in the soil. The AQI at 20 m was far above the permissible limit provided by the Environmental Protection Agency while others are gradually drawing towards the limit given for each pollutant. To safeguard the health of the residents of the host community and oil field workers, there is a need for proper and frequent environmental monitoring and assessment by authorized regulatory bodies in Nigeria. This will prevent any future exposure which may endanger the lives of the dwellers.

Impacts of groundwater level fluctuation on soil microbial community, alkane degradation efficiency and alkane-degrading gene diversity in the critical zone: Evidence from an accelerated water table fluctuation simulation

Petroleum hydrocarbons are hazardous to ecosystems and human health, commonly containing n-alkanes and polycyclic aromatic hydrocarbons. Previous researches have studied alkane degraders and degrading genes under aerobic or anaerobic conditions, but seldom discussed them in the intermittent saturation zone which is a connective area between the vadose zone and the groundwater aquifer with periodic alteration of oxygen and moisture. The present study investigated the difference in alkane degradation efficiency, bacterial community, and alkane degrading gene diversity in aerobic, anaerobic, and aerobic-anaerobic fluctuated treatments. All biotic treatments achieved over 90% of n-alkane removal after 120 days of incubation. The removal efficiencies of n-alkanes with a carbon chain length from 16 to 25 were much higher in anaerobic scenarios than those in aerobic scenarios, explained by different dominant microbes between aerobic and anaerobic conditions. The highest removal efficiency was found in fluctuation treatments, indicating an accelerated n-alkane biodegradation under aerobic-anaerobic alternation. In addition, the copy numbers of the 16S rRNA gene and two alkB genes (alkB-P and alkB-R) declined dramatically when switched from aerobic to anaerobic scenarios and oppositely from anaerobic to aerobic conditions. This suggested that water level fluctuation could notably change the presence of aerobic alkane degrading genes. Our results suggested that alkane degradation efficiency, soil microbial community, and alkane-degrading genes were all driven by water level fluctuation in the intermittent saturation zone, helping better understand the effects of seasonal water table fluctuation on the biodegradation of petroleum hydrocarbons in the subsurface environment.

Synergy of the Tropical Earthworm Pontoscolex corethrurus and Oil Palm Bagasse in the Removal of Heavy Crude Oil

The tropical endogeic earthworm Pontoscolex corethrurus, a non-standard species used in ecotoxicity, has been found in crude oil-contaminated habitats. We estimated the removal of total hydrocarbons from heavy crude "Maya" oil on an artificially contaminated soil with a median lethal concentration of P. corethrurus and an addition of oil palm bagasse. P. corethrurus had a high survival rate, and the addition of oil palm bagasse led to a greater growth and an increase in abundance of bacteria and fungi. The activity of P. corethrurus and the nutritional quality of oil palm bagasse had a significant impact on the removal of a larger amount of petroleum hydrocarbons from contaminated soil. We concluded that the endogeic earthworm P. corethrurus and oil palm bagasse acted synergistically to achieve a more effective removal of total petroleum hydrocarbons from soil. These results show the potential for using P. corethrurus to remove, either directly or indirectly, crude oil from soil.

Cost reduction strategies in the remediation of petroleum hydrocarbon contaminated soil

Petroleum hydrocarbon spill on land pollutes soil and reduces its ecosystem. Hydrocarbon transport in the soil is aided by several biological, physical, and chemical processes. However, pore characteristics play a major role in the distribution within the soil matrix. Restoring land use after spills necessitates remediation using cost-effective technologies. Several remediation technologies have been demonstrated at different scales, and research is ongoing to improve their performances towards the reduction of treatment costs. The process of removing the contaminants in the soil is through one or a combination of containment, separation, and degradation methods under the influence of biological, physical, chemical, and electrically-dominated processes. Generally, performance improvement is achieved through the introduction of products/materials and/or energy. Nevertheless, the technologies can be categorized based on effectiveness period as short, medium, and long term. The treatment cost of short, medium, and long-term technologies are usually in the range of $39 - 331/t (/tonne), $22 - 131/t, and $8 - 131/t, respectively. However, the total cost depends on other factors such as site location, capital cost, and permitting. This review compiles cost-saving strategies reported for different techniques used in remediating petroleum hydrocarbon polluted soil. We discuss the principles of contaminant removal, performance enhancing methods, and the cost-effectiveness analysis of selected technologies.

Recent Developments in Microbe-Plant-Based Bioremediation for Tackling Heavy Metal-Polluted Soils

Soil contamination with heavy metals (HMs) is a serious concern for the developing world due to its non-biodegradability and significant potential to damage the ecosystem and associated services. Rapid industrialization and activities such as mining, manufacturing, and construction are generating a huge quantity of toxic waste which causes environmental hazards. There are various traditional physicochemical techniques such as electro-remediation, immobilization, stabilization, and chemical reduction to clean the contaminants from the soil. However, these methods require high energy, trained manpower, and hazardous chemicals make these techniques costly and non-environment friendly. Bioremediation, which includes microorganism-based, plant-based, microorganism-plant associated, and other innovative methods, is employed to restore the contaminated soils. This review covers some new aspects and dimensions of bioremediation of heavy metal-polluted soils. The bioremediation potential of bacteria and fungi individually and in association with plants has been reviewed and critically examined. It is reported that microbes such as Pseudomonas spp., Bacillus spp., and Aspergillus spp., have high metal tolerance, and bioremediation potential up to 98% both individually and when associated with plants such as Trifolium repens, Helianthus annuus, and Vallisneria denseserrulata. The mechanism of microbe's detoxification of metals depends upon various aspects which include the internal structure, cell surface properties of microorganisms, and the surrounding environmental conditions have been covered. Further, factors affecting the bioremediation efficiency and their possible solution, along with challenges and future prospects, are also discussed.

Enhanced biodegradation of hydrophobic organic pollutants by the bacterial consortium: Impact of enzymes and biosurfactants

Hydrocarbons and their derivative compounds are recalcitrant in nature and causing adverse impacts to the environment and are classified as important pollutants. Removal of these pollutants from the atmosphere is a challenging process. Hydrophobic organic pollutants (HOPs) including crude oil, diesel, dotriacontane (C₃₂), and tetracontane (C₄₀) are subjected to the biodegradation study by using a bacterial consortium consist of Bacillus subtilis, Pseudomonas stutzeri, and Acinetobacter baumannii. The impact of pH and temperature on the biodegradation process was monitored. During the HOPs biodegradation, the impact of hydrocarbon-degrading extracellular enzymes such as alcohol dehydrogenase, alkane hydroxylase, and lipase was examined, and found average activity about 47.2, 44.3, and 51.8 μmol/mg^-1, respectively. Additionally, other enzymes such as catechol 1,2 dioxygenase and catechol 2,3 dioxygenase were found as 118 and 112 μmol/mg^-1 Enzyme as an average range in all the HOPs degradation, respectively. Also, the impact of the extracellular polymeric substance and proteins were elucidated during the biodegradation of HOPs with the average range of 116.90, 54.98 mg/L^-1 respectively. The impact of biosurfactants on the degradation of different types of HOPs is elucidated. Very slight changes in the pH were also noticed during the biodegradation study. Biodegradation efficiency was calculated as 90, 84, 76, and 72% for crude oil, diesel, C_32, and C₄₀, respectively. Changes in the major functional groups (CH, C-O-C, CO, =CH₂, CH₂, CH₃) were confirmed by FTIR analysis and intermediated metabolites were identified by GCMS analysis. The surface-active molecules along with the enzymes played a crucial role in the biodegradation process.

Study on soil physical structure after the bioremediation of Pb pollution using microbial-induced carbonate precipitation methodology

Soil structure is an important index to evaluate soil quality; however, previous researchers have only paid attention to the effect and economic benefits of soil heavy metal remediation. In this study, microbial-induced carbonate precipitation (MICP) technology was used to remediate soil Pb pollution, and its effect on soil structure was studied by sieving and X-ray computed tomography techniques. The results showed that the leaching amount of heavy metals in soil decreased by 76.34% after remediation. Interestingly, due to the addition of organic matter and microorganisms, the soil particle size changed from microaggregates to large aggregates, and the large soil particle size (diameter > 2 mm) increased significantly by 71.43%. The soil porosity increased by 73.78%, which enhanced the soil permeability and increased the soil hydraulic conductivity. Therefore, MICP bioremediation not only remediated soil heavy metal pollution but also promoted the soil aggregation structure, which has important significance for soil remediation and improvement.

Moniliella spathulata, an oil-degrading yeast, which promotes growth of barley in oil-polluted soil

The yeast strain Moniliella spathulata SBUG-Y 2180 was isolated from oil-contaminated soil at the Tengiz oil field in the Atyrau region of Kazakhstan on the basis of its unique ability to use crude oil and its components as the sole carbon and energy source. This yeast used a large number of hydrocarbons as substrates (more than 150), including n-alkanes with chain lengths ranging from C10 to C32, monomethyl- and monoethyl-substituted alkanes (C9-C23), and n-alkylcyclo alkanes with alkyl chain lengths from 3 to 24 carbon atoms as well as substituted monoaromatic and diaromatic hydrocarbons. Metabolism of this huge range of hydrocarbon substrates produced a very large number of aliphatic, alicyclic, and aromatic acids. Fifty-one of these were identified by GC/MS analyses. This is the first report of the degradation and formation of such a large number of compounds by a yeast. Inoculation of barley seeds with M. spathulata SBUG-Y 2180 had a positive effect on shoot and root development of plants grown in oil-contaminated sand, pointing toward potential applications of the yeast in bioremediation of polluted soils. KEY POINTS: • Moniliella spathulata an oil-degrading yeast • Increase of the growth of barley.

Insights into the mechanisms underlying the remediation potential of earthworms in contaminated soil: A critical review of research progress and prospects

In recent years, soil pollution is a major global concern drawing worldwide attention. Earthworms can resist high concentrations of soil pollutants and play a vital role in removing them effectively. Vermiremediation, using earthworms to remove contaminants from soil or help to degrade non-recyclable chemicals, is proved to be an alternative, low-cost technology for treating contaminated soil. However, knowledge about the mechanisms and framework of the vermiremediation various organic and inorganic contaminants is still limited. Therefore, we reviewed the research progress of effects of soil contaminants on earthworms and potential of earthworm used for remediation soil contaminated with heavy metals, polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs), polycyclic aromatic hydrocarbons (PAHs), pesticides, as well as crude oil. Especially, the possible processes, mechanisms, advantages and limitations, and how to boost the efficiency of vermiremediation are well addressed in this review. Finally, future prospects of vermiremediation soil contamination are listed to promote further studies and application of vermiremediation in contaminated soils.

Assessing and Modelling the Efficacy of Lemna paucicostata for the Phytoremediation of Petroleum Hydrocarbons in Crude Oil-Contaminated Wetlands

The potentials of the invasive duckweed species, Lemna paucicostata to remove pollutants from aquatic environment was tested in a constructed wetlands as an ecological based system for the phytoremediation of petroleum hydrocarbons in crude oil-contaminated waters within 120 days. Total petroleum hydrocarbons in wetlands and tissues of duckweed were analyzed using gas chromatography with flame ionization detector following established methods while the experimental data were subjected to the first-order kinetic rate model to understand the remediation rate of duckweed in wetlands. L. paucicostata effected a significant (F = 253.405, P < 0.05) removal of hydrocarbons from wetlands reaching 97.91% after 120 days. Assessment on the transport and fate of hydrocarbons in duckweed indicated that L. paucicostata bioaccumulated less than 1% and significantly biodegraded 97.74% of hydrocarbons in wetlands at the end of the study. The experimental data reasonably fitted (r2 = 0.938) into the first-order kinetic rate model. From the result of the study, it is reasonable to infer that L. paucicostata is an effective aquatic macrophyte for the removal of petroleum hydrocarbons in moderately polluted waters.

Application of common duckweed (Lemna minor) in phytoremediation of chemicals in the environment: State and future perspective

Over the past 50 years, different strategies have been developed for the remediation of polluted air, land and water. Driven by public opinion and regulatory bottlenecks, ecological based strategies are preferable than conventional methods in the treatments of chemical effluents. Ecological systems with the application of microbes, fungi, earthworms, plants, enzymes, electrode and nanoparticles have been applied to varying degrees in different media for the remediation of various categories of pollutants. Aquatic macrophytes have been used extensively for the remediation of pollutants in wastewater effluents and aquatic environment over the past 30 years with the common duckweed (L. minor) as one of the most effective macrophytes that have been applied for remediation studies. Duckweed has shown strong potentials for the phytoremediation of organic pollutants, heavy metals, agrochemicals, pharmaceuticals and personal care products, radioactive waste, nanomaterials, petroleum hydrocarbons, dyes, toxins, and related pollutants. This review covers the state of duckweed application for the remediation of diverse aquatic pollutants and identifies gaps that are necessary for further studies as we find pragmatic and sound ecological solutions for the remediation of polluted environment for sustainable development.

Toxicity assessment of fresh and weathered petroleum hydrocarbons in contaminated soil- a review

Soil contamination with total petroleum hydrocarbons (TPH) is widespread throughout the globe due to the massive production of TPH anthropogenically and its occurrence in the soil. TPH is toxic to beneficial soil organisms and humans and thus has become a serious concern among the public. Traditionally TPH toxicity in the soil is estimated based on chemical fractions and a range of bioassays including plants, invertebrates and microorganisms. There is a large inconsistency among ecotoxicology data using these assays due to the nature of TPH and their weathering. Therefore, in this article, we critically reviewed the weathered conditions of TPH, the potential fate in soil and the bioindicators for the assessment of the ecotoxicity. Based on the current research and the state-of-the-art problem, we also highlighted key recommendations for future research scope for the real-world solution of the ecotoxicological studies of hydrocarbons.

Microbial and Plant-Assisted Bioremediation of Heavy Metal Polluted Environments: A Review

Environmental pollution from hazardous waste materials, organic pollutants and heavy metals, has adversely affected the natural ecosystem to the detriment of man. These pollutants arise from anthropogenic sources as well as natural disasters such as hurricanes and volcanic eruptions. Toxic metals could accumulate in agricultural soils and get into the food chain, thereby becoming a major threat to food security. Conventional and physical methods are expensive and not effective in areas with low metal toxicity. Bioremediation is therefore an eco-friendly and efficient method of reclaiming environments contaminated with heavy metals by making use of the inherent biological mechanisms of microorganisms and plants to eradicate hazardous contaminants. This review discusses the toxic effects of heavy metal pollution and the mechanisms used by microbes and plants for environmental remediation. It also emphasized the importance of modern biotechnological techniques and approaches in improving the ability of microbial enzymes to effectively degrade heavy metals at a faster rate, highlighting recent advances in microbial bioremediation and phytoremediation for the removal of heavy metals from the environment as well as future prospects and limitations. However, strict adherence to biosafety regulations must be followed in the use of biotechnological methods to ensure safety of the environment.

Biosurfactant and enzyme mediated crude oil degradation by Pseudomonas stutzeri NA3 and Acinetobacter baumannii MN3

The present study focuses on the optimization of biosurfactant (BS) production using two potential biosurfactant producer Pseudomonas stutzeri NA3 and Acinetobacter baumannii MN3 and role of enzymes in the biodegradation of crude oil. The optimal conditions for P. stutzeri NA3 and A. baumannii MN3 for biodegradation were pH of 8 and 7; temperature of 30 and 40 °C, respectively. P. stutzeri NA3 and A. baumannii MN3 produced 3.81 and 4.68 g/L of BS, respectively. Gas chromatography mass spectrometry confirmed that BS was mainly composed of fatty acids. Furthermore, the role of the degradative enzymes, alkane hydroxylase, alcohol dehydrogenase and laccase on biodegradation of crude oil are explained. Maximum biodegradation efficiency (BE) was recorded for mixed consortia (86%) followed by strain P. stutzeri NA3 (84%). Both bacterial strains were found to be vigorous biodegraders of crude oil than other biosurfactant-producing bacteria due to their enzyme production capabilities and our results suggests that the bacterial isolates can be used for effective degradation of crude oil within short time periods.

Enzyme-mediated biodegradation of long-chain n-alkanes (C32 and C40) by thermophilic bacteria

Removal of long-chain hydrocarbons and n-alkanes from oil-contaminated environments are mere important to reduce the ecological damages, while bio-augmentation is a very promising technology that requires highly efficient microbes. In present study, the efficiency of pure isolates, i.e., Geobacillus thermoparaffinivorans IR2, Geobacillus stearothermophillus IR4 and Bacillus licheniformis MN6 and mixed consortium on degradation of long-chain n-alkanes C₃₂ and C₄₀ was investigated by batch cultivation test. Biodegradation efficiencies were found high for C₃₂ by mixed consortium (90%) than pure strains, while the pure strains were better in degradation of C₄₀ than mixed consortium (87%). In contrast, the maximum alkane hydroxylase activities (161 µmol mg^-1 protein) were recorded in mixed consortium system that had supplied with C₄₀ as sole carbon source. Also, the alcohol dehydrogenase (71 µmol mg^-1 protein) and lipase activity (57 µmol mg^-1 protein) were found high. Along with the enzyme activities, the hydrophobicity natures of the bacterial strains were found to determine the degradation efficiency of the hydrocarbons. Thus, the study suggested that the hydrophobicity of the bacteria is a critical parameter to understand the biodegradation of n-alkanes.

From oil spills to barley growth - oil-degrading soil bacteria and their promoting effects

Heavy contamination of soils by crude oil is omnipresent in areas of oil recovery and exploitation. Bioremediation by indigenous plants in cooperation with hydrocarbon degrading microorganisms is an economically and ecologically feasible means to reclaim contaminated soils. To study the effects of indigenous soil bacteria capable of utilizing oil hydrocarbons on biomass production of plants growing in oil-contaminated soils eight bacterial strains were isolated from contaminated soils in Kazakhstan and characterized for their abilities to degrade oil components. Four of them, identified as species of Gordonia and Rhodococcus turned out to be effective degraders. They produced a variety of organic acids from oil components, of which 59 were identified and 7 of them are hitherto unknown acidic oil metabolites. One of them, Rhodococcus erythropolis SBUG 2054, utilized more than 140 oil components. Inoculating barley seeds together with different combinations of these bacterial strains restored normal growth of the plants on contaminated soils, demonstrating the power of this approach for bioremediation. Furthermore, we suggest that the plant promoting effect of these bacteria is not only due to the elimination of toxic oil hydrocarbons but possibly also to the accumulation of a variety of organic acids which modulate the barley's rhizosphere environment.

Bioremediation of heavy metals and petroleum hydrocarbons in diesel contaminated soil with the earthworm: Eudrilus eugeniae

A laboratory study on the bioremediation of diesel contaminated soil with the earthworm Eudrilus eugeniae (Kingberg) was conducted. 5 ml of diesel was contaminated into soils in replicates and inoculated with E. eugeniae for 90 days. Physicochemical parameters, heavy metals and total petroleum hydrocarbons were analyzed using AAS. BTEX in contaminated soil and tissues of earthworms were determined with GC-FID. The activities of earthworms resulted in a decrease in pH (3.0 %), electrical conductivity (60.66 %), total nitrogen (47.37 %), chloride (60.66 %), total organic carbon (49.22 %), sulphate (60.59 %), nitrate (60.65 %), phosphate (60.80 %), sodium (60.65 %), potassium (60.67 %), calcium (60.67 %), magnesium (60.68 %), zinc (60.59 %), manganese (60.72 %), copper (60.68 %), nickel (60.58 %), cadmium (60.44 %), vanadium (61.19 %), chromium (53.60 %), lead (60.38 %), mercury (61.11 %), arsenic (80.85 %), TPH (84.99 %). Among the BTEX constituents, only benzene (8.35 %) was detected in soil at the end of the study. Earthworm tissue analysis showed varying levels of TPH (57.35 %), benzene (38.91 %), toluene (27.76 %), ethylbenzene (42.16 %) and xylene (09.62 %) in E. eugeniae at the end of the study. The study has shown that E. eugeniae could be applied as a possible bioremediator in diesel polluted soil.