ARGET-ATRP synthesis and characterization of PNIPAAm brushes for quantitative cell detachment studies

Protein-Polymer Conjugates as Biocompatible and Recyclable ATRP Catalysts

Atom transfer radical polymerization (ATRP) is a leading method for creating polymers with precise control over molecular weight, yet its reliance on metal catalysts limits its application in metal-sensitive and environmental contexts. Addressing these limitations, we have developed a recyclable, biocompatible, robust, and tunable ATRP catalyst composed of a protein-polymer-copper conjugate, synthesized by polymerizing an L-proline-based monomer onto bovine serum albumin and complexing with Cu(II). The use of this conjugate catalyst maintains ATRP's precision while ensuring biocompatibility with bothEscherichia coli and HEK 293 cells, and its high molecular weight allows for easy recycling through dialysis. Therefore, our efforts extend ATRP's applicability across diverse fields, including biotechnology and green chemistry, marking a significant advance toward environmentally friendly and safe polymerization technologies.

Photo-crosslinked Diels-Alder and thiol-ene polymer networks

Compositions of ethylene glycol dicyclopentenyl ether methacrylate (EGDEMA), a vegetable oil based alkyl methacrylate (C13MA), and furfuryl methacrylate (FMA) were terpolymerized for dual-crosslinked networks with tailored mechanical and thermal properties. Specifically, initiators for continuous activator regeneration (ICAR) atom transfer radical polymerization (ATRP) afforded materials with tailored glass transition temperature (T g) and incorporation of furan and norbornene functionalities within a single chain. The terpolymer with high furan and norbornene functionality (Ter2: F FMA = 0.42, F EGDEMA = 0.46, F C13MA = 0.12) is crosslinked to form single-crosslinked reversible networks with 1,1'-(methylenedi-4,1-phenylene)bismaleimide (BM) via Diels-Alder (DA) chemistry and dual-crosslinked networks incorporating additional non-reversible thiol-ene crosslinks. The reactions were photo-initiated using 254 nm UV light with BM : FMA molar ratios of 0.1 and 0.2 for both systems. FTIR analyses for crosslinked Ter2 samples confirmed the successful formation of DA and thiol-ene adducts, while DSC confirmed the reversibility of the DA reaction. A terpolymer with higher C13MA composition (Ter3: F C13MA = 0.75, F FMA = 0.17, F EGDEMA = 0.08) was similarly crosslinked in single and dual crosslinked networks with BM : FMA of 0.1 and 0.2. Crosslinking efficiency was evaluated for both single and dual crosslinked networks with a BM : FMA = 0.1 by comparing thermal and UV curing methods, with UV curing proving more effective for dual-crosslinked systems, leading to increased gel content (71% with UV compared to 61% thermally) and improved material properties. FTIR and DSC results confirmed the formation of the DA adducts and the reversibility of the DA reaction. The terpolymers were further analyzed for adhesive applications through rheological testing. These studies demonstrated that the incorporation of thiol-ene crosslinking alongside Diels-Alder crosslinking offers a balanced combination of reversible and permanent bonds, resulting in materials with enhanced mechanical strength, thermal stability, and functional versatility that are suitable for applications such as recyclable adhesives.

Antibacterial Zirconia Surfaces from Organocatalyzed Atom-Transfer Radical Polymerization

Antibacterial coatings are becoming increasingly attractive for application in the field of biomaterials. In this framework, we developed polymer coating zirconia with antibacterial activity using the "grafting from" methodology. First, 1-(4-vinylbenzyl)-3-butylimidazolium chloride monomer was synthesized. Then, the surface modification of zirconia substrates was performed with this monomer via surface-initiated photo atom transfer radical polymerization for antibacterial activity. X-ray photoelectron spectroscopy, ellipsometry, static contact angle measurements, and an atomic force microscope were used to characterize the films for each step of the surface modification. The results revealed that cationic polymers could be successfully deposited on the zirconia surfaces, and the thickness of the grafted layer steadily increased with polymerization time. Finally, the antibacterial adhesion test was used to evaluate the antibacterial activity of the modified zirconia substrates, and we successfully showed the antibacterial activity against Staphylococcus aureus and Pseudomonas aeruginosa strains.

Reversible Adsorption and Detachment of Saccharomyces cerevisiae on Thermoresponsive Poly(N-isopropylacrylamide)-Grafted Fibers for Continuous Immobilized Fermentation

Biofilm-mediated continuous fermentation with cells immobilized has gained much attention in recent years. In this study, thermoresponsive poly(N-isopropylacrylamide)-grafted cotton fibers (PNIPAM-CF) were prepared via an improved surface-initiated atom transfer radical polymerization. The modification process imparted switchable wettability to the surface while maintaining the thermal stability and biocompatibility of the CF. During the ethanol transformation, the rapid, reversible cell adsorption and detachment of Saccharomyces cerevisiae were performed through the modulation of wettability, displaying the enhancement of immobilized biomass and immobilization efficiency from 2.20 g/L and 59.43% to 2.81 g/L and 93.32%, respectively. Moreover, the biofilm adsorption matched well with the Freundlich model, indicating that multilayer adhesion was the main mode of biofilm formation. Based on the accumulation of the biofilm, the fabrication and utilization of PNIPAM-CF improved the efficiency of continuous immobilized fermentation, making the ethanol production reach 26.34 g/L in the sixth batch of fermentation. Meanwhile, wettability regulation further enhanced the reusability of the carrier. Therefore, the findings of this study revealed that the application of smart materials in cell immobilization systems had broad prospects for achieving sustainable and continuous catalysis.

Fundamentals and utilization of solid/ liquid phase boundary interactions on functional surfaces

The affinity of macroscopic solid surfaces or dispersed nano- and bioparticles towards liquids plays a key role in many areas from fluid transport to interactions of the cells with phase boundaries. Forces between solid interfaces in water become especially important when the surface texture or particles are in the colloidal size range. Although, solid-liquid interactions are still prioritized subjects of materials science and therefore are extensively studied, the related literature still lacks in conclusive approaches, which involve as much information on fundamental aspects as on recent experimental findings related to influencing the wetting and other wetting-related properties and applications of different surfaces. The aim of this review is to fill this gap by shedding light on the mechanism-of-action and design principles of different, state-of-the-art functional macroscopic surfaces, ranging from self-cleaning, photoreactive or antimicrobial coatings to emulsion separation membranes, as these surfaces are gaining distinguished attention during the ongoing global environmental and epidemic crises. As there are increasing numbers of examples for stimulus-responsive surfaces and their interactions with liquids in the literature, as well, this overview also covers different external stimulus-responsive systems, regarding their mechanistic principles and application possibilities.

Hybrid "Kill and Release" Antibacterial Cellulose Papers Obtained via Surface-Initiated Atom Transfer Radical Polymerization

Infectious diseases triggered by bacteria cause a severe risk to human health. To counter this issue, surfaces coated with antibacterial materials have been widely used in daily life to kill these bacteria. The substrates enabled with a hybrid kill and release strategy can be employed not only to kill the bacteria but also to wash them using external stimuli (temperature, pH, etc.). Utilizing this concept, we develop thermoresponsive antibacterial-cellulose papers to exhibit hybrid kill and release properties. Thermoresponsive copolymers [p(NIPAAm-co-AEMA)] are grafted on cellulose papers using a surface-initiated atom transfer radical polymerization approach for bacterial debris release. Later for antibacterial properties, silver nanoparticles (AgNPs) are immobilized on thermoresponsive copolymer-grafted cellulose papers using electrostatic interactions. We confirm the thermoresponsive copolymer grafting and AgNP coating by attenuated total reflection Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy. Thermoresponsiveness and reusability of the modified cellulose papers are confirmed through water contact angle measurements. The interaction potency between AgNPs and modified cellulose is validated by inductively coupled plasma atomic emission spectroscopy analysis. Gram-negative bacteria Escherichia coli (E. coli DH5-α) is used to demonstrate antibacterial hybrid kill and release performance. Agar-diffusion testing demonstrates the antibacterial nature of the modified cellulose papers. The fluorescence micrograph reveals that modified cellulose papers can effectively release almost all the dead bacterial debris from their surfaces after thermal stimulus wash. The modified cellulose paper surfaces are expected to have wide applications in the field of exploring more antibacterial and smart surfaces.

Constrained thermoresponsive polymers - new insights into fundamentals and applications

In the last decades, numerous stimuli-responsive polymers have been developed and investigated regarding their switching properties. In particular, thermoresponsive polymers, which form a miscibility gap with the ambient solvent with a lower or upper critical demixing point depending on the temperature, have been intensively studied in solution. For the application of such polymers in novel sensors, drug delivery systems or as multifunctional coatings, they typically have to be transferred into specific arrangements, such as micelles, polymer films or grafted nanoparticles. However, it turns out that the thermodynamic concept for the phase transition of free polymer chains fails, when thermoresponsive polymers are assembled into such sterically confined architectures. Whereas many published studies focus on synthetic aspects as well as individual applications of thermoresponsive polymers, the underlying structure-property relationships governing the thermoresponse of sterically constrained assemblies, are still poorly understood. Furthermore, the clear majority of publications deals with polymers that exhibit a lower critical solution temperature (LCST) behavior, with PNIPAAM as their main representative. In contrast, for polymer arrangements with an upper critical solution temperature (UCST), there is only limited knowledge about preparation, application and precise physical understanding of the phase transition. This review article provides an overview about the current knowledge of thermoresponsive polymers with limited mobility focusing on UCST behavior and the possibilities for influencing their thermoresponsive switching characteristics. It comprises star polymers, micelles as well as polymer chains grafted to flat substrates and particulate inorganic surfaces. The elaboration of the physicochemical interplay between the architecture of the polymer assembly and the resulting thermoresponsive switching behavior will be in the foreground of this consideration.

Recent Advances in Surface Nanoengineering for Biofilm Prevention and Control. Part II: Active, Combined Active and Passive, and Smart Bacteria-Responsive Antibiofilm Nanocoatings

The second part of our review describing new achievements in the field of biofilm prevention and control, begins with a discussion of the active antibiofilm nanocoatings. We present the antibiofilm strategies based on antimicrobial agents that kill pathogens, inhibit their growth, or disrupt the molecular mechanisms of biofilm-associated increase in resistance and tolerance. These agents of various chemical structures act through a plethora of mechanisms targeting vital bacterial metabolic pathways or cellular structures like cell walls and cell membranes or interfering with the processes that underlie different stages of the biofilm life cycle. We illustrate the latter action mechanisms through inhibitors of the quorum sensing signaling pathway, inhibitors of cyclic-di-GMP signaling system, inhibitors of (p)ppGpp regulated stringent response, and disruptors of the biofilm extracellular polymeric substances matrix (EPS). Both main types of active antibiofilm surfaces, namely non-leaching or contact killing systems, which rely on the covalent immobilization of the antimicrobial agent on the surface of the coatings and drug-releasing systems in which the antimicrobial agent is physically entrapped in the bulk of the coatings, are presented, highlighting the advantages of each coating type in terms of antibacterial efficacy, biocompatibility, selective toxicity, as well as drawbacks and limitations. Developments regarding combined strategies that join in a unique platform, both passive and active elements are not omitted. In such platforms with dual functionality, passive and active strategies can be applied either simultaneously or sequentially. We especially emphasize those systems that can be reversely and repeatedly switched between the non-fouling status and the bacterial killing status, thereby allowing several bacteria-killing/surface regeneration cycles to be performed without significant loss of the initial bactericidal activity. Eventually, smart antibiofilm coatings that release their antimicrobial payload on demand, being activated by various triggers such as changes in local pH, temperature, or enzymatic triggers, are presented. Special emphasis is given to the most recent trend in the field of anti-infective surfaces, specifically smart self-defensive surfaces for which activation and switch to the bactericidal status are triggered by the pathogens themselves.

Switchable Wettability for Condensation Heat Transfer

Condensation proceeds as dropwise or filmwise depending on the wettability of the condensing surface. These two modes of condensation have disparate heat transfer coefficients, with dropwise often exceeding filmwise. This work reports a surface with switchable superhydrophilic to hydrophobic wetting behavior that can exhibit both modes of condensation. Relative to the highly wetting state, which yields filmwise condensation, the nonwetting state exhibits dropwise condensation and twice the heat transfer coefficient. Relevance to thermal management is additionally discussed.

Natural catalyst mediated ARGET and SARA ATRP of N-isopropylacrylamide and methyl acrylate

An extract prepared from inexpensive, drumstick leaves having natural transition metals in ppm levels was exploited as a catalyst for a well-controlled synthesis of poly(N-isopropylacrylamide) and poly(methyl acrylate).

Hydrophobization of chitosan films by surface grafting with fluorinated polymer brushes

Chitosan with its surface-properties and biodegradability is a promising biomaterial for green packaging applications. Till now, this application is still limited due to chitosan high sensitivity to water. Some existing studies deal with the incorporation of hydrophobic additives to enhance water-proof performances of chitosan films. As these additives may impair the film properties, our study focuses on chitosan efficient hydrophobization by means of simple and successful surface grafting reactions. Chitosan films prepared by solvent casting were modified by means of surface-initiated activators regenerated by electron transfer atom radical polymerization (SI-ARGET-ATRP) of 2-hydroxyethyl methacrylate (HEMA) followed by esterification reaction with fluorinated acyl compound. X-ray photoelectron spectroscopy (XPS), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and Time-of-Flight Secondary Ion Mass Spectroscopy (ToF-SIMS) highlighted the surface chemical changes after each step. Surface properties were investigated by contact angle measurements and surface energy calculations. Hydrophobic surfaces with low surface energy and good water-repellent properties were obtained using a simple handling polymerization procedure. This is the first study in applying ARGET ATRP to prepare hydrophobic biopolymer films offering potential applications in packaging.

Up in the air: oxygen tolerance in controlled/living radical polymerisation

The requirement for deoxygenation in controlled/living radical polymerisation (CLRP) places significant limitations on its widespread implementation by necessitating the use of large reaction volumes, sealed reaction vessels as well as requiring access to specialised equipment such as a glove box and/or inert gas source. As a result, in recent years there has been intense interest in developing strategies for overcoming the effects of oxygen inhibition in CLRP and therefore remove the necessity for deoxygenation. In this review, we highlight several strategies for achieving oxygen tolerant CLRP including: "polymerising through" oxygen, enzyme mediated deoxygenation and the continuous regeneration of a redox-active catalyst. In order to provide further clarity to the field, we also establish some basic parameters for evaluating the degree of "oxygen tolerance" that can be achieved using a given oxygen scrubbing strategy. Finally, we propose some applications that could most benefit from the implementation of oxygen tolerant CLRP and provide a perspective on the future direction of this field.

Dynamic field testing of coating chemistry candidates by a rotating disk system

Quick and reliable testing is crucial for the development of new fouling release (FR) coatings. Exposure of these coatings to natural multispecies communities is essential in evaluating their efficacy. To this end, we present a rotating disk setup for dynamic field exposure. To achieve a well-defined flow on the surface of the disk, an easy to use sample mounting system was developed that provides a smooth and even surface. We related the angular velocity of the disk to the wall shear stress on the surface with a hydrodynamic model. The wall shear stress was adjusted to values previously found to be suitable to discriminate dynamic diatom attachment on different coating chemistries in the lab. The effect of the dynamic conditions was shown by comparing polystyrene slides under static and dynamic exposure. Using a set of self-assembled monolayers, the discrimination potential of the assay in a multispecies environment was demonstrated.

Retention of poly(N-isopropylacrylamide) on 3-aminopropyltriethoxysilane

Silane coupling agents are commonly employed to link an organic polymer to an inorganic substrate. One of the widely utilized coupling agents is 3-aminopropyltriethoxy silane (APTES). In this study, the authors investigated the ability of APTES to retain thermo-responsive poly(N-isopropylacrylamide) (pNIPAAm) on hydroxylated surfaces such as glass. For comparison purposes, the authors also evaluated the retention behaviors of (1) polystyrene, which likely has weaker van der Waals interactions and acid-base interactions (contributed by hydrogen-bonding) with APTES, on APTES as well as (2) pNIPAAm on two other silane coupling agents, which have similar structures to APTES, but exhibit less interaction with pNIPAAm. Under our processing conditions, the stronger interactions, particularly hydrogen bonding, between pNIPAAm and APTES were found to contribute substantially to the retention of pNIPAAm on the APTES modified surface, especially on the cured APTES layer when the interpenetration was minimal or nonexistent. On the noncured APTES layer, the formation of an APTES-pNIPAAm interpenetrating network resulted in the retention of thicker pNIPAAm films. As demonstrated by water contact angles [i.e., 7°-15° higher at 40 °C, the temperature above the lower critical solution temperature (LCST) of 32 °C for pNIPAAm, as compared to those at 25 °C] and cell attachment and detachment behaviors (i.e., attached/spread at 37 °C, above LCST; detached at 20 °C, below LCST), the retained pNIPAAm layer (6-15 nm), on both noncured and cured APTES, exhibited thermo-responsive behavior. The results in this study illustrate the simplicity of using the coupling/adhesion promoting ability of APTES to retain pNIPAAm films on hydroxylated substrates, which exhibit faster cell sheet detachment (≤30 min) as compared to pNIPAAm brushes (in hours) prepared using tedious and costly grafting approaches. The use of adhesion promoters to retain pNIPAAm provides an affordable alternative to current thermo-responsive supports for cell sheet engineering and stem cell therapy applications.

Achieving Ultralow Fouling under Ambient Conditions via Surface-Initiated ARGET ATRP of Carboxybetaine

We achieved ultralow fouling on target surfaces by controlled polymerization of carboxybetaine under ambient conditions. The polymerization process for grafting polymer films onto the surfaces was carried out in air and did not require any deoxygenation step or specialized equipment. This method allows one to conveniently introduce a nonfouling polymer network onto large substrates.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

Smart Antibacterial Surface Made by Photopolymerization

On the basis of the use of photopolymerization technology, a facile and reliable method for in situ preparation of silver nanoparticles (AgNPs) within PNIPAAm functional surfaces is presented as a means to achieve nonfouling, antibacterial films. The surface properties were characterized by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), water contact angle, and thermogravimetric analysis (TGA). The antibacterial and release properties of the surfaces were tested against E. coli: at 37 °C (above the LCST of PNIPAAm), the functional films facilitated the attachment of bacteria, which were then killed by the AgNPs. Changing temperature to 4 °C (below the LCST), swollen PNIPAAm chains led the release of dead bacteria. The results showed that AgNPs/PNIPAAm hybrid surfaces offer a "smart" antibacterial capability in response to the change of environmental temperature.

Incorporation of silicone oil into elastomers enhances barnacle detachment by active surface strain

Silicone-oil additives are often used in fouling-release silicone coatings to reduce the adhesion strength of barnacles and other biofouling organisms. This study follows on from a recently reported active approach to detach barnacles, which was based on the surface strain of elastomeric materials, by investigating a new, dual-action approach to barnacle detachment using Ecoflex®-based elastomers incorporated with poly(dimethylsiloxane)-based oil additives. The experimental results support the hypothesis that silicone-oil additives reduce the amount of substratum strain required to detach barnacles. The study also de-coupled the two effects of silicone oils (ie surface-activity and alteration of the bulk modulus) and examined their contributions in reducing barnacle adhesion strength. Further, a finite element model based on fracture mechanics was employed to qualitatively understand the effects of surface strain and substratum modulus on barnacle adhesion strength. The study demonstrates that dynamic substratum deformation of elastomers with silicone-oil additives provides a bifunctional approach towards management of biofouling by barnacles.

The Conformation of Thermoresponsive Polymer Brushes Probed by Optical Reflectivity

We describe a microscope-based optical setup that allows us to perform space- and time-resolved measurements of the spectral reflectance of transparent substrates coated with ultrathin films. This technique is applied to investigate the behavior in water of thermosensitive polymer brushes made of poly(N-isopropylacrylamide) grafted on glass. We show that spectral reflectance measurements yield quantitative information about the conformation and axial structure of the brushes as a function of temperature. We study how parameters such as grafting density and chain length affect the hydration state of a brush, and provide one of the few experimental evidences for the occurrence of vertical phase separation in the vicinity of the lower critical solution temperature of the polymer. The origin of the hysteretic behavior of poly(N-isopropylacrylamide) brushes upon cycling the temperature is also clarified. We thus demonstrate that our optical technique allows for in-depth characterization of stimuli-responsive polymer layers, which is crucial for the rational design of smart polymer coatings in actuation, gating, or sensing applications.

Nanopatterned polymer brushes: conformation, fabrication and applications

Surfaces with end-grafted, nanopatterned polymer brushes that exhibit well-defined feature dimensions and controlled chemical and physical properties provide versatile platforms not only for investigation of nanoscale phenomena at biointerfaces, but also for the development of advanced devices relevant to biotechnology and electronics applications. In this review, we first give a brief introduction of scaling behavior of nanopatterned polymer brushes and then summarize recent progress in fabrication and application of nanopatterned polymer brushes. Specifically, we highlight applications of nanopatterned stimuli-responsive polymer brushes in the areas of biomedicine and biotechnology.

Fast and robust fabrication of reusable molds for hydrogel micro-patterning

We present a method to create protein micropatterns onto polyacrylamide hydrogels, in order to control the adhesive confinement of cells in traction force microscopy experiments. The technique is based on patterned polymer brushes that serve as molds that can be re-used without repeating microfabrication steps.

Self-Sterilizing, Self-Cleaning Mixed Polymeric Multifunctional Antimicrobial Surfaces

Mitigation of bacterial adhesion and subsequent biofilm formation is quickly becoming a strategy for the prevention of hospital-acquired infections. We demonstrate a basic strategy for surface modification that combines the ability to control attachment by microbes with the ability to inactivate microbes. The surface consists of two active materials: poly(p-phenylene ethynylene)-based polymers, which can inactivate a wide range of microbes and pathogens, and poly(N-isopropylacrylamide)-based polymers, which can switch between an hydrophobic "capture" state and a hydrophilic "release" state. The combination of these materials creates a surface that can both bind microbes in a switchable way and kill surface-bound microbes efficiently. Considerable earlier work with cationic poly(p-phenylene ethynylene) polyelectrolytes has demonstrated and characterized their antimicrobial properties, including the ability to efficiently destroy or deactivate Gram-negative and Gram-positive bacteria, fungi, and viruses. Similarly, much work has shown (1) that surface-polymerized films of poly(N-isopropylacrylamide) are able to switch their surface thermodynamic properties from a swollen, relatively hydrophilic state at low temperature to a condensed, relatively hydrophobic state at higher temperature, and (2) that this switch can control the binding and/or release of microbes to poly(N-isopropylacrylamide) surfaces. The active surfaces described herein were fabricated by first creating a film of biocidal poly(p-phenylene ethynylene) using layer-by-layer methods, and then conferring switchable adhesion by growing poly(N-isopropylacrylamide) through the poly(p-phenylene ethynylene) layer, using surface-attached polymerization initiators. The resulting multifunctional, complex films were then characterized both physically and functionally. We demonstrate that such films kill and subsequently induce widespread release of Gram-negative and Gram-positive bacteria.

Modification of Silicone Elastomer Surfaces with Zwitterionic Polymers: Short-Term Fouling Resistance and Triggered Biofouling Release

We present a method for dual-mode-management of biofouling by modifying surface of silicone elastomers with zwitterionic polymeric grafts. Poly(sulfobetaine methacrylate) was grafted from poly(vinylmethylsiloxane) elastomer substrates using thiol-ene click chemistry and surface-initiated, controlled radical polymerization. These surfaces exhibited both fouling resistance and triggered fouling-release functionality. The zwitterionic polymers exhibited fouling resistance over short-term (∼hours) exposure to bacteria and barnacle cyprids. The biofilms that eventually accumulated over prolonged-exposure (∼days) were easily detached by applying mechanical strain to the elastomer substrate. Such dual-functional surfaces may be useful in developing environmentally and biologically friendly coatings for biofouling management on marine, industrial, and biomedical equipment because they can obviate the use of toxic compounds.

Urinary catheter capable of repeated on-demand removal of infectious biofilms via active deformation

Biofilm removal from biomaterials is of fundamental importance, and is especially relevant when considering the problematic and deleterious impact of biofilm infections on the inner surfaces of urinary catheters. Catheter-associated urinary tract infections are the most common cause of hospital-acquired infections and there are over 30 million Foley urinary catheters used annually in the USA. In this paper, we present the design and optimization of urinary catheter prototypes capable of on-demand removal of biofilms from the inner luminal surface of catheters. The urinary catheters utilize 4 intra-wall inflation lumens that are pressure-actuated to generate region-selective strains in the elastomeric urine lumen, and thereby remove overlying biofilms. A combination of finite-element modeling and prototype fabrication was used to optimize the catheter design to generate greater than 30% strain in the majority of the luminal surface when subjected to pressure. The catheter prototypes are able to remove greater than 80% of a mixed community biofilm of Proteus mirabilis and Escherichia coli on-demand, and furthermore are able to remove the biofilm repeatedly. Additionally, experiments with the prototypes demonstrate that biofilm debonding can be achieved upon application of both tensile and compressive strains in the inner surface of the catheter. The fouling-release catheter offers the potential for a non-biologic, non-antibiotic method to remove biofilms and thereby for impacting the thus far intractable problem of catheter-associated infections.

Dual-function antibacterial surfaces for biomedical applications

Bacterial attachment and the subsequent formation of biofilm on surfaces of synthetic materials pose a serious problem in both human healthcare and industrial applications. In recent decades, considerable attention has been paid to developing antibacterial surfaces to reduce the extent of initial bacterial attachment and thereby to prevent subsequent biofilm formation. Briefly, there are three main types of antibacterial surfaces: bactericidal surfaces, bacteria-resistant surfaces, and bacteria-release surfaces. The strategy adopted to develop each type of surface has inherent advantages and disadvantages; many efforts have been focused on the development of novel antibacterial surfaces with dual functionality. In this review, we highlight the recent progress made in the development of dual-function antibacterial surfaces for biomedical applications. These surfaces are based on the combination of two strategies into one system, which can kill attached bacteria as well as resisting or releasing bacteria. Perspectives on future research directions for the design of dual-function antibacterial surfaces are also provided.

Nanopatterned antimicrobial enzymatic surfaces combining biocidal and fouling release properties

Surfaces incorporating the antimicrobial enzyme, lysozyme, have been previously demonstrated to effectively disrupt bacterial cellular envelopes. As with any surface active antimicrobial, however, lysozyme-expressing surfaces become limited in their utility by the accumulation of dead bacteria and debris. Surfaces modified with environmentally responsive polymers, on the other hand, have been shown to reversibly attach and release both live and dead bacterial cells. In this work, we combine the antimicrobial activity of lysozyme with the fouling release capability of the thermally responsive polymer, poly(N-isopropylacrylamide) (PNIPAAm), which has a lower critical solution temperature (LCST) in water at ∼32 °C. Nanopatterned PNIPAAm brushes were fabricated using interferometric lithography followed by surface-initiated polymerization. Lysozyme was then adsorbed into the polymer-free regions of the substrate between the brushes to achieve a hybrid surface with switchable antimicrobial activity and fouling-release ability in response to the change of temperature. The temperature triggered hydration and conformational change of the nanopatterned PNIPAAm brushes provide the ability to temporally regulate the spatial concealment and exposure of adsorbed lysozyme. The biocidal efficacy and release properties of the hybrid surface were tested against Escherichia coli K12 and Staphylococcus epidermidis. The hybrid surfaces facilitated the attachment of bacteria at 37 °C for E. coli and 25 °C for S. epidermidis and when the temperature is above the LCST, collapsed and dehydrated PNIPAAm chains expose lysozyme to kill attached bacteria. Changing temperature across the LCST of PNIPAAm (e.g. from 37 °C to 25 °C for E. coli or from 25 °C to 37 °C for S. epidermidis) to induce a hydration transition of PNIPAAm promoted the release of dead bacteria and debris from the surfaces upon mild shearing. These results suggest that nano-engineered surfaces can provide an effective way for actively mitigating short term bacterial biofouling.

RIR-MAPLE deposition of multifunctional films combining biocidal and fouling release properties

Multifunctional films combining switchable biocidal and fouling release properties were deposited on substrates using RIR-MAPLE.

Nanopatterned smart polymer surfaces for controlled attachment, killing, and release of bacteria

Model surfaces with switchable functionality based on nanopatterned, thermoresponsive poly(N-isopropylacrylamide) (PNIPAAm) brushes were fabricated using interferometric lithography combined with surface-initiated polymerization. The temperature-triggered hydration and conformational changes of nanopatterned PNIPAAm brushes reversibly modulate the spatial concealment and exposure of molecules that are immobilized in the intervals between nanopatterned brushes. A biocidal quaternary ammonium salt (QAS) was used to demonstrate the utility of nanopatterned PNIPAAm brushes to control biointerfacial interactions with bacteria. QAS was integrated into polymer-free regions of the substrate between nanopatterned PNIPAAm brushes. The biocidal efficacy and release properties of these surfaces were tested against Escherichia coli K12. Above the lower critical solution temperature (LCST) of PNIPAAm, desolvated, collapsed polymer chains facilitate the attachment of bacteria and expose QAS moieties that kill attached bacteria. Upon a reduction of the temperature below the LCST, swollen PNIPAAm chains promote the release of dead bacteria. These results demonstrate that nanopatterned PNIPAAm/QAS hybrid surfaces are model systems that exhibit an ability to undergo noncovalent, dynamic, and reversible changes in structure that can be used to control the attachment, killing, and release of bacteria in response to changes in temperature.

Nanopatterned polymer brushes as switchable bioactive interfaces

We report convenient methods for synthesis of nanopatterned, thermally responsive brushes of poly(N-isopropyl acrylamide) over large areas (e.g., 1 cm(2)) to form model, dynamic, biofunctional surfaces. The new nanopatterned brush structure can be used to control (i) the rate of both nonspecific and biospecific adsorption processes at the polymer-graft-free regions of the substrate, and (ii) the rate of cell detachment. These capabilities have potential implications in a number of areas of biotechnology including biosensing, separations and cell culture.