Cryogenic Exfoliation of 2D Stanene Nanosheets for Cancer Theranostics

Cryo-Exfoliation Synthesis of Borophene and its Application in Wearable Electronics

Borophene, an anisotropic Dirac Xene, exhibits diverse crystallographic phases, including metallic β₁₂, χ₃, and semiconducting α phases, alongside exceptional properties such as high electronic mobility, superior Young's modulus, thermal conductivity, superconductivity, and ferroelasticity. These attributes position borophene as a promising material for energy storage, electrocatalysis, and wearable electronics. However, its widespread application is hindered by existing synthesis methods that are expensive, complex, and yield-limited. This study presents a novel, cost-effective, environmentally friendly cryo-exfoliation method for borophene synthesis. Crystalline boron powder is rapidly quenched in liquid nitrogen and subjected to mild sonication, producing borophene with lateral dimensions of ≈50 to 10 µm and few-layer thicknesses. Advanced characterizations, including Atomic Force Microscopy (AFM), High-Resolution Transmission Electron Microscopy (HRTEM), Raman Spectroscopy, and X-ray Photoelectron Spectroscopy (XPS), confirm structural integrity, chemical purity, and minimal surface oxidation. Molecular dynamics simulations further elucidate the weakened inter-layer coupling induced by cryo-processing. The integration of borophene into Polyvinylidene Fluoride (PVDF) nanocomposites demonstrates its potential for wearable electronics, achieving motion-sensitive devices with outstanding performance, generating output voltages up to ≈40 V. This scalable cryo-exfoliation approach paves the way for borophene-based applications in energy harvesting, sensing, and next-generation electronics.

Aqueous Dispersion of Xenes by Liquid Phase Exfoliation of Monoelemental Crystals in Melamine Solution

Αfter the impressive evolution of graphene and its derivatives, a large number of two dimensional (2D) materials with important optical and electrical properties have been successfully fabricated. Liquid phase exfoliation (LPE) of layered and non-layered materials has become a widely applied method for the preparation of 2D nanostructures with an extensive variety of applications. However, in most cases organic solvents are used as liquid phase which are often toxic and environmentally unfriendly and lead to low yields. In this work, we present water as a suitable liquid phase and dispersion medium for the exfoliation of layered and non-layered monoelemental solids from IVA, VA and VIA groups of the periodic table, such as silicon, tin, bismuth and tellurium. The 2D nanostructures, silicene, stanene, bismuthene and tellurene are therefore prepared by a completely sustainable and environmentally friendly method. The prepared Xenes, as they are called, are fully characterized by microscopic and spectroscopic techniques.

Periodic Table of Immunomodulatory Elements and Derived Two-Dimensional Biomaterials

Periodic table of chemical elements serves as the foundation of material chemistry, impacting human health in many different ways. It contributes to the creation, growth, and manipulation of functional metallic, ceramic, metalloid, polymeric, and carbon-based materials on and near an atomic scale. Recent nanotechnology advancements have revolutionized the field of biomedical engineering to tackle longstanding clinical challenges. The use of nano-biomaterials has gained traction in medicine, specifically in the areas of nano-immunoengineering to treat inflammatory and infectious diseases. Two-dimensional (2D) nanomaterials have been found to possess high bioactive surface area and compatibility with human and mammalian cells at controlled doses. Furthermore, these biomaterials have intrinsic immunomodulatory properties, which is crucial for their application in immuno-nanomedicine. While significant progress has been made in understanding their bioactivity and biocompatibility, the exact immunomodulatory responses and mechanisms of these materials are still being explored. Current work outlines an innovative "immunomodulatory periodic table of elements" beyond the periodic table of life, medicine, and microbial genomics and comprehensively reviews the role of each element in designing immunoengineered 2D biomaterials in a group-wise manner. It recapitulates the most recent advances in immunomodulatory nanomaterials, paving the way for the development of new mono, hybrid, composite, and hetero-structured biomaterials.

Water as Solvent for the Dispersion of 2D Nanostructured Materials

The development of large number of two-dimensional (2D) nanostructured materials that followed the success of graphene and the need for their handling and manipulation e. g., in inks, brought to the fore the study of solvents and substances that contribute to the stabilization of 2D nanomaterials in the liquid phase. The successful dispersion of 2D materials in solvents is combined with one of the most widespread preparation methods, that of liquid phase exfoliation. In this article, a review for the role of water in the preparation of different 2D nanostructures and their stable dispersions in the liquid phase is discussed. The use of water as a solvent or dispersant is instrumental in promoting materials with an ecological footprint, low cost, and sustainability.

Facile Exfoliation of Few-Layer Sn-Based Nanosheets for Self-Powered Photo-Electrochemical and All-Optical Modulation Applications

Few-layer tin (Sn)-based nanosheets (NSs) with a thickness of ≈2.5 nm are successfully prepared using a modified liquid phase exfoliation (LPE) method. Here the first exploration of photo-electrochemical (PEC) and nonlinear properties of Sn NSs is presented. The results demonstrate that the PEC properties are tunable under different experimental conditions. Additionally, Sn NSs are shown to exhibit a unique self-powered PEC performance, maintaining a good long-term stability for up to 1 month. Using electron spin resonance, active species, such as hydroxyl radicals (·OH), superoxide radicals (·O2 -), and holes (h+), are detected during operations, providing a deeper understanding of the working mechanism. Furthermore, measurements of nonlinear response reveal that Sn NSs can be effective for all-optical modulation, as it enables the realization of all-optical switching through excitation spatial cross-phase modulation (SXPM). These findings present new research insights and potential applications of Sn NSs in optoelectronics.

Graphene via Microwave Expansion of Graphite Followed by Cryo-Quenching and its Application in Electrostatic Droplet Switching

Monoelemental atomic sheets (Xenes) and other 2D materials offer record electronic mobility, high thermal conductivity, excellent Young's moduli, optical transparency, and flexural capability, revolutionizing ultrasensitive devices and enhancing performance. The ideal synthesis of these quantum materials should be facile, fast, scalable, reproducible, and green. Microwave expansion followed by cryoquenching (MECQ) leverages thermal stress in graphite to produce high-purity graphene within minutes. MECQ synthesis of graphene is reported at 640 and 800 W for 10 min, followed by liquid nitrogen quenching for 5 and 90 min of sonication. Microscopic and spectroscopic analyses confirmed the chemical identity and phase purity of monolayers and few-layered graphene sheets (200-12 µm). Higher microwave power yields thinner layers with enhanced purity. Molecular dynamics simulations and DFT calculations support the exfoliation under these conditions. Electrostatic droplet switching is demonstrated using MECQ-synthesized graphene, observing electrorolling of a mercury droplet on a BN/graphene interface at voltages above 20 V. This technique can inspire the synthesis of other 2D materials with high purity and enable new applications.

Dimension-Dependent Nonlinear Optical Properties of Stanene Nanosheets

Stanene (Sn)-based materials, with a graphene-like hexagonal structure, are now attracting considerable interest for potential applications in photoelectricity. However, the nonlinear optical properties of stanene remain largely unexplored. In this work, we prepared different sizes of stanene by liquid phase exfoliation and differential centrifugation methods, including two-dimensional (2D) Sn nanosheets (NSs) and zero-dimensional (0D) Sn nanodots (NDs). Z-scan measurements reveal that 2D Sn NSs exhibited high saturable absorption behavior, while the 0D Sn NDs led to reverse saturable absorption. Femtosecond ultrafast transient absorption spectra revealed that the reverse saturable absorption of Sn NDs is derived from a stronger excited state absorption and faster exciton relaxation dynamics. This research expands the potential applications of stanene in laser shielding and other ultrafast photonics technologies.

High-Yield Exfoliation of Stanene Nanodots for High-Performance Organic Light-Emitting Diodes

Stanene nanodots (SnNDs) derived from layered tin have attracted considerable interest due to their conveniently tunable bandgap and topological superconductivity. However, high-yield exfoliation of ultrathin SnNDs is still a challenge due to the short layer spacing and strong binding energy. In this work, atomically thin SnNDs with a uniform size of 2.3 nm are successfully prepared by utilizing imidazolium ionic liquid-assisted exfoliation. The obtained SnNDs possess a wide bandgap of 2.69 eV, along with notable solvent compatibility (well dispersed in both polar and nonpolar solvents) and excellent stability. Furthermore, we construct Ir(ppy)3-based green OLED with hybridizing SnNDs and graphene oxide (GO) as the hole injection layer (HIL). It proves that the application of SnNDs helps to modulate the work function and passivate surface defects of GO, increasing hole mobility and thereby improving the device performance. Compared to the PEDOT:PSS-based control device, the optimized SnNDs-GO-based OLED demonstrates an improvement of 6.56, 41.06, and 8.16% in current efficiency (CE), power efficiency (PE), and external quantum efficiency (EQE), respectively. This work not only introduces a new approach to preparing 2D SnNDs but also creates a novel HIL material for OLED devices.

Structure and exfoliation mechanism of two-dimensional boron nanosheets

Exfoliation of two-dimensional (2D) nanosheets from three-dimensional (3D) non-layered, non-van der Waals crystals represents an emerging strategy for materials engineering that could significantly increase the library of 2D materials. Yet, the exfoliation mechanism in which nanosheets are derived from crystals that are not intrinsically layered remains unclear. Here, we show that planar defects in the starting 3D boron material promote the exfoliation of 2D boron sheets-by combining liquid-phase exfoliation, aberration-corrected scanning transmission electron microscopy, Raman spectroscopy, and density functional theory calculations. We demonstrate that 2D boron nanosheets consist of a planar arrangement of icosahedral sub-units cleaved along the {001} planes of β-rhombohedral boron. Correspondingly, intrinsic stacking faults in 3D boron form parallel layers of faulted planes in the same orientation as the exfoliated nanosheets, reducing the {001} cleavage energy. Planar defects represent a potential engineerable pathway for exfoliating 2D sheets from 3D boron and, more broadly, the other covalently bonded materials.

Metastable FeSe2 nanosheets as a one-for-all platform for stepwise synergistic tumor therapy

The urgent need to curb the rampant rise in cancer has impelled the rapid development of nanomedicine. Under the above issue, transition metal compounds have received special attention considering their physicochemical and biochemical properties. However, how to take full advantage of the valuable characteristics of nanomaterials based on their spatial structures and chemical components for synergistic tumor therapy is a worthwhile exploration. In this work, a tailored two-dimensional (2D) FeSe2 nanosheet (NS) platform is proposed, which integrates enzyme activity and drug efficacy through the regulation of itsstability. Specifically, metastable FeSe2 NSs can serve as dual nanozymes in an intact state, depleting GSH and increasing ROS to induce oxidative stress in the tumor microenvironment (TME). With the gradual degradation of the FeSe2 in TME, its degraded products can amplify the Fenton reaction and GSH consumption, enhance the expression of inflammatory factors, and achieve effective near-infrared (NIR)-light irradiation-enhanced synergistic photothermal therapy (PTT) and chemodynamic therapy (CDT). Our exploration further confirmed such a strategy that may integrate carrier activity and drug action into a metastable nanoplatform for tumor synergistic therapy. These results prompt the consideration of the rational design of a one-for-all carrier that can exhibit multifunctional properties and nanomedicine efficacy for versatile therapeutic applications in the future.

Liquid exfoliation of molybdenum metallenes for non-inflammatory photothermal therapy of tumors

Tissue damage and cell death occurring during photothermal therapy (PTT) for tumors can induce an inflammatory response that is detrimental to tumor therapy. Herein, ultrathin Mo metallene nanosheets with a thickness of <5 nm prepared by liquid phase exfoliation were explored as functional hyperthermia agents for non-inflammatory ablation of tumors. The obtained Mo metallene nanosheets exhibited good photothermal conversion properties and significant reactive oxygen species (ROS) scavenging ability, thus achieving superior cancer cell ablation and anti-inflammatory effects in vitro. For in vivo experiments, 4T1 tumors were ablated while the inflammation-related cytokine levels did not obviously increase, demonstrating that the inflammatory response induced by PTT was inhibited by the anti-inflammatory properties of Mo metallene nanosheets. Moreover, Mo metallene nanosheets depicted good dispersibility and biocompatibility, beneficial for biomedical applications. This work introduces Mo metallenes as promising hyperthermia agents for non-inflammatory PTT of tumors.

Recent Advances of Emerging Metal-Containing Two-Dimensional Nanomaterials in Tumor Theranostics

In recent years, metal-containing two-dimensional (2D) nanomaterials, among various 2D nanomaterials have attracted widespread attention because of their unique physical and chemical properties, especially in the fields of biomedical applications. Firstly, the review provides a brief introduction to two types of metal-containing 2D nanomaterials, based on whether metal species take up the major skeleton of the 2D nanomaterials. After this, the synthetical approaches are summarized, focusing on two strategies similar to other 2D nanomaterials, top-down and bottom-up methods. Then, the performance and evaluation of these 2D nanomaterials when applied to cancer therapy are discussed in detail. The specificity of metal-containing 2D nanomaterials in physics and optics makes them capable of killing cancer cells in a variety of ways, such as photodynamic therapy, photothermal therapy, sonodynamic therapy, chemodynamic therapy and so on. Besides, the integrated platform of diagnosis and treatment and the clinical translatability through metal-containing 2D nanomaterials is also introduced in this review. In the summary and perspective section, advanced rational design, challenges and promising clinical contributions to cancer therapy of these emerging metal-containing 2D nanomaterials are discussed.

In situ Engineering of Tumor-Associated Macrophages via a Nanodrug-Delivering-Drug (β-Elemene@Stanene) Strategy for Enhanced Cancer Chemo-Immunotherapy

Tumor-associated macrophages (TAMs) play a critical role in the immunosuppressive solid tumor microenvironment (TME), yet in situ engineering of TAMs for enhanced tumor immunotherapy remains a significant challenge in translational immuno-oncology. Here, we report an innovative nanodrug-delivering-drug (STNSP@ELE) strategy that leverages two-dimensional (2D) stanene-based nanosheets (STNSP) and β-Elemene (ELE), a small-molecule anticancer drug, to overcome TAM-mediated immunosuppression and improve chemo-immunotherapy. Our results demonstrate that both STNSP and ELE are capable of polarizing the tumor-supportive M2-like TAMs into a tumor-suppressive M1-like phenotype, which acts with the ELE chemotherapeutic to boost antitumor responses. In vivo mouse studies demonstrate that STNSP@ELE treatment can reprogram the immunosuppressive TME by significantly increasing the intratumoral ratio of M1/M2-like TAMs, enhancing the population of CD4+ and CD8+ T lymphocytes and mature dendritic cells, and elevating the expression of immunostimulatory cytokines in B16F10 melanomas, thereby promoting a robust antitumor response. Our study not only demonstrates that the STNSP@ELE chemo-immunotherapeutic nanoplatform has immune-modulatory capabilities that can overcome TAM-mediated immunosuppression in solid tumors, but also highlights the promise of this nanodrug-delivering-drug strategy in developing other nano-immunotherapeutics and treating various types of immunosuppressive tumors.

Metal-Organic Frameworks Nucleated by Silk Fibroin and Modified with Tumor-Targeting Peptides for Targeted Multimodal Cancer Therapy

Multimodal therapy requires effective drug carriers that can deliver multiple drugs to specific locations in a controlled manner. Here, the study presents a novel nanoplatform constructed using zeolitic imidazolate framework-8 (ZIF-8), a nanoscale metal-organic framework nucleated under the mediation of silk fibroin (SF). The nanoplatform is modified with the newly discovered MCF-7 breast tumor-targeting peptide, AREYGTRFSLIGGYR (AR peptide). Indocyanine green (ICG) and doxorubicin (DOX) are loaded onto the nanoplatform with high drug encapsulation efficiency (>95%). ICG enables the resultant nanoparticles (NPs), called AR-ZS/ID-P, to release reactive oxygen species for photodynamic therapy (PDT) and heat for photothermal therapy (PTT) under near-infrared (NIR) irradiation, promoting NIR fluorescence and thermal imaging to guide DOX-induced chemotherapy. Additionally, the controlled release of both ICG and DOX at acidic tumor conditions due to the dissolution of ZIF-8 provides a drug-targeting mechanism in addition to the AR peptide. When intravenously injected, AR-ZS/ID-P NPs specifically target breast tumors and exhibit higher anticancer efficacy than other groups through ICG-enabled PDT and PTT and DOX-derived chemotherapy, without inducing side effects. The results demonstrate that AR-ZS/ID-P NPs are a promising multimodal theranostic nanoplatform with maximal therapeutic efficacy and minimal side effects for targeted and controllable drug delivery.

Tantalum Nitride-Based Theranostic Agent for Photoacoustic Imaging-Guided Photothermal Therapy in the Second NIR Window

Metal nitrides show excellent photothermal stability and conversion properties, which have the potential for photothermal therapy (PTT) for cancer. Photoacoustic imaging (PAI) is a new non-invasive and non-ionizing biomedical imaging method that can provide real-time guidance for precise cancer treatment. In this work, we develop polyvinylpyrrolidone-functionalized tantalum nitride nanoparticles (defined as TaN-PVP NPs) for PAI-guided PTT of cancer in the second near-infrared (NIR-II) window. The TaN-PVP NPs are obtained by ultrasonic crushing of massive tantalum nitride and further modification by PVP to obtain good dispersion in water. Due to their good absorbance in the NIR-II window, TaN-PVP NPs with good biocompatibility have obvious photothermal conversion performance, realizing efficient tumor elimination by PTT in the NIR-II window. Meanwhile, the excellent PAI and photothermal imaging (PTI) capabilities of TaN-PVP NPs are able to provide monitoring and guidance for the treatment process. These results indicate that TaN-PVP NPs are qualified for cancer photothermal theranostics.

Cancer nanomedicine toward clinical translation: Obstacles, opportunities, and future prospects

With the integration of nanotechnology into the medical field at large, great strides have been made in the development of nanomedicines for tackling different diseases, including cancers. To date, various cancer nanomedicines have demonstrated success in preclinical studies, improving therapeutic outcomes, prolonging survival, and/or decreasing side effects. However, the translation from bench to bedside remains challenging. While a number of nanomedicines have entered clinical trials, only a few have been approved for clinical applications. In this review, we highlight the most recent progress in cancer nanomedicine, discuss current clinical advances and challenges for the translation of cancer nanomedicines, and provide our viewpoints on accelerating clinical translation. We expect this review to benefit the future development of cancer nanotherapeutics specifically from the clinical perspective.

Tinware-Inspired Aerobic Surface-Initiated Controlled Radical Polymerization (SI-Sn0CRP) for Biocompatible Surface Engineering

Surface anchored polymer brushes prepared by surface-initiated controlled radical polymerization (SI-CRP) have raised considerable interest in biomaterials and bioengineering. However, undesired residues of noxious transition metal catalysts critically restrain their widespread biomedical applications. Herein, we present a robust and biocompatible surface-initiated controlled radical polymerization catalyzed by a Sn(0) sheet (SI-Sn⁰CRP) under ambient conditions. Through this approach, microliter volumes of vinyl monomers with diverse functions (heterocyclic, ionic, hydrophilic, and hydrophobic) could be efficiently converted to homogeneous polymer brushes. The excellent controllability of SI-Sn⁰CRP strategy is further demonstrated by the exquisite fabrication of predetermined block and patterned polymer brushes through chain extension and photolithography, respectively. Additionally, in virtue of intrinsic biocompatibility of Sn, the resultant polymer brushes present transcendent affinity toward blood and cell, in marked contrast to those of copper-based approaches. This strategy could provide an avenue for the controllable fabrication of biocompatible polymer brushes toward biological applications.

The marriage of Xenes and hydrogels: Fundamentals, applications, and outlook

Hydrogels have blossomed as superstars in various fields, owing to their prospective applications in tissue engineering, soft electronics and sensors, flexible energy storage, and biomedicines. Two-dimensional (2D) nanomaterials, especially 2D mono-elemental nanosheets (Xenes) exhibit high aspect ratio morphology, good biocompatibility, metallic conductivity, and tunable electrochemical properties. These fascinating characteristics endow numerous tunable application-specific properties for the construction of Xene-based hydrogels. Hierarchical multifunctional hydrogels can be prepared according to the application requirements and can be effectively tuned by different stimulation to complete specific tasks in a spatiotemporal sequence. In this review, the synthesis mechanism, properties, and emerging applications of Xene hydrogels are summarized, followed by a discussion on expanding the performance and application range of both hydrogels and Xenes.

First-principles study on the structural properties of 2D MXene SnSiGeN4 and its electronic properties under the effects of strain and an external electric field

The MXene SnSiGeN4 monolayer as a new member of the MoSi2N4 family was proposed for the first time, and its structural and electronic properties were explored by applying first-principles calculations with both PBE and hybrid HSE06 approaches. The layered hexagonal honeycomb structure of SnSiGeN4 was determined to be stable under dynamical effects or at room temperature of 300 K, with a rather high cohesive energy of 7.0 eV. The layered SnSiGeN4 has a Young's modulus of 365.699 N m-1 and a Poisson's ratio of 0.295. The HSE06 approach predicted an indirect band gap of around 2.4 eV for the layered SnSiGeN4. While the major donation from the N-p orbitals to the band structure makes SnSiGeN4's band gap close to those of similar 2D MXenes, the smaller distributions from the other orbitals of Sn, Si, and Ge slightly vary this band gap. The work functions of the GeN and SiN surfaces are 6.367 eV and 5.903 eV, respectively. The band gap of the layered SnSiGeN4 can be easily tuned by strain and an external electric field. A semiconductor-metal transition can occur at certain values of strain, and with an electric field higher than 5 V nm-1. The electron mobility of the layered SnSiGeN4 can reach up to 677.4 cm2 V-1 s-1, which is much higher than the hole mobility of about 52 cm2 V-1 s-1. The mentioned characteristics make the layered SnSiGeN4 a very promising material for use in electronic and photoelectronic devices, and for solar energy conversion.

Engineering Fe/Mn-doped zinc oxide nanosonosensitizers for ultrasound-activated and multiple ferroptosis-augmented nanodynamic tumor suppression

As an effective tumor-therapeutic modality, ultrasound-triggered sonodynamic therapy (SDT) has been extensively explored to induce cancer cell death by activating sonosensitizers to generate reactive oxygen species (ROS). However, the traditional inorganic semiconductor-based sonosensitizers still suffer from inefficient ROS production because of the low separation efficiency of electrons and holes (e^-/h⁺) and their fast recombination. Herein, the iron (Fe) and manganese (Mn) co-doped zinc oxide nanosonosensitizers have been rationally designed and engineered for augmenting the SDT efficiency against tumor by inducing both multiple ferroptosis and apoptosis of tumor cells. The Fe/Mn component was co-doped into the nannostructure of ZnO nanosonosensitizers, which not only catalyzed the Fenton reaction in the hydrogen peroxide-overexpressed tumor microenvironment to produce ROS, but also depleted intracellular glutathione to suppress the consumption of ROS. The doping nanostructure in the engineered nanosonosensitizers substantially augmented the SDT efficacy of ZnO nanosonosensitizers by promoting the separation and hindering the recombination of e^-/h⁺ under ultrasound activation. The multiple ferroptosis and apoptosis in the enhanced SDT effect of Fe/Mn co-doped ZnO nanosonosensitizers were solidly demonstrated both in vitro and in vivo on tumor-bearing mice in accompany with the detailed mechanism assessment by RNA sequenching. This work provides a distinct strategy to augment the nanomedicine-enabled SDT efficency by engineering the inorganic semiconductor-based nanosonosensitizers with transitional metal doping and inducing multiple cell-death pathways including ferroptosis.

Metal-Cyclic Dinucleotide Nanomodulator-Stimulated STING Signaling for Strengthened Radioimmunotherapy of Large Tumor

Combined treatment of immunotherapy and radiotherapy shows promising therapeutic effects for the regression of a variety of cancers. However, even multi-modality therapies often fail to antagonize the regression of large tumors due to the extremely immunosuppressive tumor microenvironment (TME). Here, a radioimmunotherapeutic paradigm based on stimulator of interferon genes (STING)-dependent signaling is applied to preclude large tumor progression by utilizing the metal-cyclic dinucleotide (CDN) nanoplatform, which integrates STING agonist c-di-AMP and immunomodulating microelement manganese (II) within the tannic acid nanostructure (TMA-NPs). As observed by magnetic resonance imaging, the localized administration of TMA-NPs effectively relieves hypoxia within TME and causes radical oxygen species overproduction and apoptosis in cancer cells after exposure to X-ray irradiation. The DNA fragments released from the apoptotic cells after the combined treatment augment the production of endogenous CDNs in cancer cells, hence significantly activating the STING-mediated pathway for stronger anti-tumor immunity. The localized therapy of TMA-NPs + X-ray not only inhibits the primary large tumor progression but also retards distant tumor growth by promoting dendritic cell maturation and activating cytotoxic immune cells whil suppressing immunosuppressive cells. Therefore, this work represents the combinatorial potency of TMA-NPs and X-rays on large tumor regression through strengthened STING-mediated radioimmunotherapeutics.

Germanene-modified chitosan hydrogel for treating bacterial wound infection: An ingenious hydrogel-assisted photothermal therapy strategy

The elaborate design of an ingenious hydrogel-assisted photothermal therapy (PTT) platform is a promising strategy for treating bacterial wound infections. Herein, a new generation of germanene nanocrystals (Ge NCs) with excellent photothermal performance are prepared via an ice-bath sonication liquid-phase exfoliation technique. Whereafter, by crosslinking interaction between chitosan and zinc acetate, as well as self-assembly property between Ge NCs and chitosan, we successfully construct an innovative germanene-modified chitosan antimicrobial hydrogel (CS/Ge NCs^0.8) integrating capture and killing bacteria performances. When co-cultured with bacteria, CS/Ge NCs^0.8 hydrogel with the positive charge can adsorb and restrict bacteria in the range of PTT destruction. Once the near-infrared laser is introduced, CS/Ge NCs^0.8 hydrogel will effectively convert light energy into localized heat, further inducing bacterial death. By this entirely novel modality, CS/Ge NCs^0.8 hydrogel exhibits marvelous antibacterial property against E. coli and S. aureus in vitro. Furthermore, in vivo studies demonstrate that CS/Ge NCs^0.8 hydrogel possesses the ability to significantly rescue S. aureus-induced skin wound infections, suggesting CS/Ge NCs^0.8 hydrogel can be served as an antibacterial dressing. Strikingly, this is the first-ever report of CS/Ge NCs^0.8 hydrogel in the antibacterial field, which may spur a wave of developing Ge-based biomaterials to benefit biomedical applications.

Carbon nanomaterials for drug delivery and tissue engineering

Carbon nanomaterials are some of the state-of-the-art materials used in drug-delivery and tissue-engineering research. Compared with traditional materials, carbon nanomaterials have the advantages of large specific surface areas and unique properties and are more suitable for use in drug delivery and tissue engineering after modification. Their characteristics, such as high drug loading and tissue loading, good biocompatibility, good targeting and long duration of action, indicate their great development potential for biomedical applications. In this paper, the synthesis and application of carbon dots (CDs), carbon nanotubes (CNTs) and graphene in drug delivery and tissue engineering are reviewed in detail. In this review, we discuss the current research focus and existing problems of carbon nanomaterials in order to provide a reference for the safe and effective application of carbon nanomaterials in drug delivery and tissue engineering.

Liquid-Phase Exfoliation of Nonlayered Non-Van-Der-Waals Crystals into Nanoplatelets

For nearly 15 years, researchers have been using liquid-phase exfoliation (LPE) to produce 2D nanosheets from layered crystals. This has yielded multiple 2D materials in a solution-processable form whose utility has been demonstrated in multiple applications. It was believed that the exfoliation of such materials is enabled by the very large bonding anisotropy of layered materials where the strength of intralayer chemical bonds is very much larger than that of interlayer van der Waals bonds. However, over the last five years, a number of papers have raised questions about our understanding of exfoliation by describing the LPE of nonlayered materials. These results are extremely surprising because, as no van der Waals gap is present to provide an easily cleaved direction, the exfoliation of such compounds requires the breaking of only chemical bonds. Here the progress in this unexpected new research area is examined. The structure and properties of nanoplatelets produced by LPE of nonlayered materials are reviewed. A number of unexplained trends are found, not least the preponderance of isotropic materials that have been exfoliated to give high-aspect-ratio nanoplatelets. Finally, the applications potential of this new class of 2D materials are considered.

A multifunctional nanotheranostic agent potentiates erlotinib to EGFR wild-type non-small cell lung cancer

Epidermal growth factor receptor (EGFR) tyrosine kinase inhibitors (TKI), such as Erlotinib, have demonstrated remarkable efficacy in the treatment of non-small cell lung cancer (NSCLC) patients with mutated EGFR. However, the efficacy of EGFR-TKIs in wild-type (wt) EGFR tumours has been shown to be marginal. Methods that can sensitize Erlotinib to EGFR wild-type NSCLC remain rare. Herein, we developed a multifunctional superparamagnetic nanotheranostic agent as a novel strategy to potentiate Erlotinib to EGFR-wt NSCLCs. Our results demonstrate that the nanoparticles can co-escort Erlotinib and a vascular epithermal growth factor (VEGF) inhibitor, Bevacizumab (Bev), to EGFR-wt tumours. The nanotheranostic agent exhibits remarkable effects as an inhibitor of EGFR-wt tumour growth. Moreover, Bev normalizes the tumour embedded vessels, further promoting the therapeutic efficacy of Erlotinib. In addition, the tumour engagement of the nanoparticles and the vascular normalization could be tracked by magnetic resonance imaging (MRI). Collectively, our study, for the first time, demonstrated that elaborated nanoparticles could be employed as a robust tool to potentiate Erlotinib to EGFR-wt NSCLC, paving the way for imaging-guided nanotheranostics for refractory NSCLCs expressing EGFR wild-type genes.

2D materials-based nanomedicine: From discovery to applications

Due to their unique physicochemical characteristics, 2D materials have attracted more and more attention in the biomedicine field. Currently, 2D materials-based nanomedicines have been extensively applied in various diseases including cancer, bacterial infection, tissue engineering, biological protection, neurodegenerative diseases, and cardiovascular disease. Depending on their various characteristics, these 2D nanomedicines exert their therapeutic effect in different ways, showing great clinical application prospects. Herein, we focus on the various biomedical applications of 2D materials-based nanomedicine. The structures and characteristics of several typical 2D nanomaterials with different configurations and their corresponding biomedical applications are first introduced. Then, the potential of 2D nanomedicines on therapeutic and imaging and their biological functionalization are discussed. Furthermore, the therapeutic potentials of 2D nanomedicines in various diseases are also comprehensively summarized. At last, the challenges and perspectives for the advancement of 2D nanomedicines in clinical transformation are outlooks.

Minimally invasive nanomedicine: nanotechnology in photo-/ultrasound-/radiation-/magnetism-mediated therapy and imaging

Traditional treatments such as chemotherapy and surgery usually cause severe side effects and excruciating pain. The emergence of nanomedicines and minimally invasive therapies (MITs) has brought hope to patients with malignant diseases. Especially, minimally invasive nanomedicines (MINs), which combine the advantages of nanomedicines and MITs, can effectively target pathological cells/tissues/organs to improve the bioavailability of drugs, minimize side effects and achieve painless treatment with a small incision or no incision, thereby acquiring good therapeutic effects. In this review, we provide a comprehensive review of the research status and challenges of MINs, which generally refers to the medical applications of nanotechnology in photo-/ultrasound-/radiation-/magnetism-mediated therapy and imaging. Additionally, we also discuss their combined application in various fields including cancers, cardiovascular diseases, tissue engineering, neuro-functional diseases, and infectious diseases. The prospects, and potential bench-to-bedside translation of MINs are also presented in this review. We expect that this review can inspire the broad interest for a wide range of readers working in the fields of interdisciplinary subjects including (but not limited to) chemistry, nanomedicine, bioengineering, nanotechnology, materials science, pharmacology, and biomedicine.

Intracellular Mutual Amplification of Oxidative Stress and Inhibition Multidrug Resistance for Enhanced Sonodynamic/Chemodynamic/Chemo Therapy

Emerging noninvasive treatments, such as sonodynamic therapy (SDT) and chemodynamic therapy (CDT), have developed as promising alternatives or supplements to traditional chemotherapy. However, their therapeutic effects are limited by the hypoxic environment of tumors. Here, a biodegradable nanocomposite-mesoporous zeolitic-imidazolate-framework@MnO₂ /doxorubicin hydrochloride (mZMD) is developed, which achieves enhanced SDT/CDT/chemotherapy through promoting oxidative stress and overcoming the multidrug resistance. The mZMD decomposes under both ultrasound (US) irradiation and specific reactions in the tumor microenvironment (TME). The mZM composite structure reduces the recombination rate of e^- and h⁺ to improve SDT. MnO₂ not only oxidizes glutathione in tumor cells to enhance oxidative stress, but also converts the endogenic H₂ O₂ into O₂ to improve the hypoxic TME, which enhances the effects of chemotherapy/SDT. Meanwhile, the generated Mn²⁺ catalyzes the endogenic H₂ O₂ into ·OH for CDT, and acts as magnetic resonance imaging agent to guide therapy. In addition, dissociated Zn²⁺ further breaks the redox balance of TME, and co-inhibits the expression of P-glycoprotein (P-gp) with generated ROS to overcome drug resistance. Thus, the as-prepared intelligent biodegradable mZMD provides an innovative strategy to enhance SDT/CDT/chemotherapy.

Layered post-transition-metal dichalcogenide SnGe2N4 as a promising photoelectric material: a DFT study

First-principles calculations were performed to study a novel layered SnGe2N4 compound, which was found to be dynamically and thermally stable in the 2H phase, with the space group P6̄m2 and lattice constant a = 3.143 Å. Due to its hexagonal structure, SnGe2N4 exhibits isotropic mechanical properties on the x-y plane, where the Young's modulus is 335.49 N m-1 and the Poisson's ratio is 0.862. The layered 2H SnGe2N4 is a semiconductor with a direct band gap of 1.832 eV, allowing the absorption of infrared and visible light at a rate of about 104 cm-1. The DOS is characterized by multiple high peaks in the valence and conduction bands, making it possible for this semiconductor to absorb light in the ultraviolet region with an even higher rate of 105 cm-1. The band structure, with a strongly concave downward conduction band and rather flat valence band, leads to a high electron mobility of 1061.66 cm2 V-1 s-1, which is substantially greater than the hole mobility of 28.35 cm2 V-1 s-1. This difference in mobility is favorable for electron-hole separation. These advantages make layered 2H SnGe2N4 a very promising photoelectric material. Furthermore, the electronic structure of 2H SnGe2N4 responds well to strain and an external electric field due to the specificity of the p-d hybridization, which predominantly constructs the valence bands. As a result, strain and external electric fields can efficiently tune the band gap value of 2H SnGe2N4, where compressive strain widens the band gap, meanwhile tensile strain and external electric fields cause band gap reduction. In particular, the band gap is decreased by about 0.25 eV when the electric field strength increases by 0.1 V Å-1, making a semiconductor-metal transition possible for the layered SnGe2N4.

Facile synthesis of near-infrared responsive on-demand oxygen releasing nanoplatform for precise MRI-guided theranostics of hypoxia-induced tumor chemoresistance and metastasis in triple negative breast cancer

BACKGROUND

Hypoxia is an important factor that contributes to chemoresistance and metastasis in triple negative breast cancer (TNBC), and alleviating hypoxia microenvironment can enhance the anti-tumor efficacy and also inhibit tumor invasion.

METHODS

A near-infrared (NIR) responsive on-demand oxygen releasing nanoplatform (O2-PPSiI) was successfully synthesized by a two-stage self-assembly process to overcome the hypoxia-induced tumor chemoresistance and metastasis. We embedded drug-loaded poly (lactic-co-glycolic acid) cores into an ultrathin silica shell attached with paramagnetic Gd-DTPA to develop a Magnetic Resonance Imaging (MRI)-guided NIR-responsive on-demand drug releasing nanosystem, where indocyanine green was used as a photothermal converter to trigger the oxygen and drug release under NIR irradiation.

RESULTS

The near-infrared responsive on-demand oxygen releasing nanoplatform O2-PPSiI was chemically synthesized in this study by a two-stage self-assembly process, which could deliver oxygen and release it under NIR irradiation to relieve hypoxia, improving the therapeutic effect of chemotherapy and suppressed tumor metastasis. This smart design achieves the following advantages: (i) the O2 in this nanosystem can be precisely released by an NIR-responsive silica shell rupture; (ii) the dynamic biodistribution process of O2-PPSiI was monitored in real-time and quantitatively analyzed via sensitive MR imaging of the tumor; (iii) O2-PPSiI could alleviate tumor hypoxia by releasing O2 within the tumor upon NIR laser excitation; (iv) The migration and invasion abilities of the TNBC tumor were weakened by inhibiting the process of EMT as a result of the synergistic therapy of NIR-triggered O2-PPSiI.

CONCLUSIONS

Our work proposes a smart tactic guided by MRI and presents a valid approach for the reasonable design of NIR-responsive on-demand drug-releasing nanomedicine systems for precise theranostics in TNBC.

Ca2+-supplying black phosphorus-based scaffolds fabricated with microfluidic technology for osteogenesis

Effective osteogenesis remains a challenge in the treatment of bone defects. The emergence of artificial bone scaffolds provides an attractive solution. In this work, a new biomineralization strategy is proposed to facilitate osteogenesis through sustaining supply of nutrients including phosphorus (P), calcium (Ca), and silicon (Si). We developed black phosphorus (BP)-based, three-dimensional nanocomposite fibrous scaffolds via microfluidic technology to provide a wealth of essential ions for bone defect treatment. The fibrous scaffolds were fabricated from 3D poly (l-lactic acid) (PLLA) nanofibers (3D NFs), BP nanosheets, and hydroxyapatite (HA)-porous SiO2 nanoparticles. The 3D BP@HA NFs possess three advantages: i) stably connected pores allow the easy entrance of bone marrow-derived mesenchymal stem cells (BMSCs) into the interior of the 3D fibrous scaffolds for bone repair and osteogenesis; ii) plentiful nutrients in the NFs strongly improve osteogenic differentiation in the bone repair area; iii) the photothermal effect of fibrous scaffolds promotes the release of elements necessary for bone formation, thus achieving accelerated osteogenesis. Both in vitro and in vivo results demonstrated that the 3D BP@HA NFs, with the assistance of NIR laser, exhibited good performance in promoting bone regeneration. Furthermore, microfluidic technology makes it possible to obtain high-quality 3D BP@HA NFs with low costs, rapid processing, high throughput and mass production, greatly improving the prospects for clinical application. This is also the first BP-based bone scaffold platform that can self-supply Ca2+, which may be the blessedness for older patients with bone defects or patients with damaged bones as a result of calcium loss.

Versatile Types of Inorganic/Organic NIR-IIa/IIb Fluorophores: From Strategic Design toward Molecular Imaging and Theranostics

In vivo imaging in the second near-infrared window (NIR-II, 1000-1700 nm), which enables us to look deeply into living subjects, is producing marvelous opportunities for biomedical research and clinical applications. Very recently, there has been an upsurge of interdisciplinary studies focusing on developing versatile types of inorganic/organic fluorophores that can be used for noninvasive NIR-IIa/IIb imaging (NIR-IIa, 1300-1400 nm; NIR-IIb, 1500-1700 nm) with near-zero tissue autofluorescence and deeper tissue penetration. This review provides an overview of the reports published to date on the design, properties, molecular imaging, and theranostics of inorganic/organic NIR-IIa/IIb fluorophores. First, we summarize the design concepts of the up-to-date functional NIR-IIa/IIb biomaterials, in the order of single-walled carbon nanotubes (SWCNTs), quantum dots (QDs), rare-earth-doped nanoparticles (RENPs), and organic fluorophores (OFs). Then, these novel imaging modalities and versatile biomedical applications brought by these superior fluorescent properties are reviewed. Finally, challenges and perspectives for future clinical translation, aiming at boosting the clinical application progress of NIR-IIa and NIR-IIb imaging technology are highlighted.

Biomaterials and nanomedicine for bone regeneration: Progress and future prospects

Bone defects pose a heavy burden on patients, orthopedic surgeons, and public health resources. Various pathological conditions cause bone defects including trauma, tumors, inflammation, osteoporosis, and so forth. Auto- and allograft transplantation have been developed as the most commonly used clinic treatment methods, among which autologous bone grafts are the golden standard. Yet the repair of bone defects, especially large-volume defects in the geriatric population or those complicated with systemic disease, is still a challenge for regenerative medicine from the clinical perspective. The fast development of biomaterials and nanomedicine favors the emergence and promotion of efficient bone regeneration therapies. In this review, we briefly summarize the progress of novel biomaterial and nanomedical approaches to bone regeneration and then discuss the current challenges that still hinder their clinical applications in treating bone defects.

Near-Infrared Radiation-Assisted Drug Delivery Nanoplatform to Realize Blood-Brain Barrier Crossing and Protection for Parkinsonian Therapy

Mitochondrial dysfunction, which is directly involved in Parkinson's disease (PD), is characterized by the production of reactive oxygen species (ROS) and aberrant energy metabolism. Thus, regulating mitochondrial function might be an effective strategy to treat PD. However, the blood-brain barrier (BBB) presents a significant challenge for the intracerebral delivery of drugs. Here, we synthesized a zeolitic imidazolate framework 8-coated Prussian blue nanocomposite (ZIF-8@PB), which was encapsulated with quercetin (QCT), a natural antioxidant, to treat PD. ZIF-8@PB-QCT exhibited superior near-infrared radiation (NIR) response and penetrated through the BBB to the site of mitochondrial damage guided by the photothermal effect. In the mice model of PD, the QCT released from ZIF-8@PB-QCT significantly increased the adenosine triphosphate levels, reduced the oxidative stress levels, and reversed dopaminergic neuronal damage as well as PD-related behavioral deficits without any damage to the normal tissues. Furthermore, we explored the underlying neuroprotective mechanism of ZIF-8@PB-QCT that was mediated by activating the PI3K/Akt signaling pathway. Thus, combined with noninvasive NIR radiation, the biocompatible ZIF-8@PB-QCT nanocomposite could be used to treat neurodegenerative diseases.

Designing highly stable ferrous selenide-black phosphorus nanosheets heteronanostructure via P-Se bond for MRI-guided photothermal therapy

Background

The design of stable and biocompatible black phosphorus-based theranostic agents with high photothermal conversion efficiency and clear mechanism to realize MRI-guided precision photothermal therapy (PTT) is imminent.

Results

Herein, black phosphorus nanosheets (BPs) covalently with mono-dispersed and superparamagnetic ferrous selenide (FeSe₂) to construct heteronanostructure nanoparticles modified with methoxy poly (Ethylene Glycol) (mPEG-NH₂) to obtain good water solubility for MRI-guided photothermal tumor therapy is successfully designed. The mechanism reveals that the enhanced photothermal conversion achieved by BPs-FeSe₂-PEG heteronanostructure is attributed to the effective separation of photoinduced carriers. Besides, through the formation of the P-Se bond, the oxidation degree of FeSe₂ is weakened. The lone pair electrons on the surface of BPs are occupied, which reduces the exposure of lone pair electrons in air, leading to excellent stability of BPs-FeSe₂-PEG. Furthermore, the BPs-FeSe₂-PEG heteronanostructure could realize enhanced T₂-weighted imaging due to the aggregation of FeSe₂ on BPs and the formation of hydrogen bonds, thus providing accurate PTT guidance and generating hyperthermia to inhabit tumor growth under NIR laser with negligible toxicity in vivo.

Conclusions

Collectively, this work offers an opportunity for fabricating BPs-based heteronanostructure nanomaterials that could simultaneously enhance photothermal conversion efficiency and photostability to realize MRI-guided cancer therapy.

Graphic abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-021-00905-5.

1T-Phase Dirac Semimetal PdTe2 Nanoparticles for Efficient Photothermal Therapy in the NIR-II Biowindow

1T-phase transition-metal dichalcogenides (TMDs) nanomaterials are one type of emerging and promising near-infrared II (NIR-II) photothermal agents (PTAs) derived from their distinct metallic electronic structure, but it is still challenging to synthesize these nanomaterials. Herein, PdTe2 nanoparticles (PTNs) with a 1T crystal symmetry and around 50 nm in size are prepared by an electrochemical exfoliation method, and the corresponding photothermal performances irradiated under a NIR-II laser have been explored. The encapsulation of 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-poly(ethylene glycol) (DSPE-PEG) endows PTNs with water solubility, enhanced photothermal stability, and high biocompatibility. Notably, PTN/DSPE-PEG displays a potent absorbance through the NIR-II zone and considerable photothermal conversion efficiency, which is up to 68% when irradiated with a 1060 nm laser. With these unique photothermal properties, excellent in vitro and in vivo tumor inhibition effects of PTN/DSPE-PEG have been achieved under the irradiation of a NIR-II (1060 nm) laser without visible toxicity to normal tissues, suggesting that it is an efficient NIR-II photothermal nanoagent.

Low-dose X-ray enhanced tumor accumulation of theranostic nanoparticles for high-performance bimodal imaging-guided photothermal therapy

BACKGROUND

Theranostic nanoparticles (NPs) have achieved rapid development owing to their capacity for personalized multimodal diagnostic imaging and antitumor therapy. However, the efficient delivery and bulk accumulation of NPs in tumors are still the decisive factors in improving therapeutic effect. It is urgent to seek other methods to alters tumor microenvironment (like vascular permeability and density) for enhancing the efficiency of nanoparticles delivery and accumulation at the tumor site.

METHODS

Herein, we developed a Raman-tagged hollow gold nanoparticle (termed as HAuNP@DTTC) with surface-enhanced Raman scattering (SERS) property, which could be accumulated efficiently in tumor site with the pre-irradiation of low-dose (3 Gy) X-ray and then exerted highly antitumor effect in breast cancer model.

RESULTS

The tumor growth inhibition (TGI) of HAuNP@DTTC-induced photothermal therapy (PTT) was increased from 60% for PTT only to 97%, and the lethal distant metastasis of 4T1 breast cancer (such as lung and liver) were effectively inhibited under the X-ray-assisted PTT treatment. Moreover, with the strong absorbance induced by localized surface plasmon resonance in near-infrared (NIR) region, the signals of Raman/photoacoustic (PA) imaging in tumor was also significantly enhanced after the administration of HAuNP@DTTC, indicating it could be used as the Raman/PA imaging and photothermal agent simultaneously under 808 nm laser irradiation.

CONCLUSIONS

Our studied of the as-prepared HAuNP@DTTC integrated the Raman/PA imaging and PTT functions into the single platform, and showed the good prospects for clinical applications especially with the low-dose X-ray irradiation as an adjuvant, which will be a productive strategy for enhancing drug delivery and accumulation in tumor theranostics.

Biomedical applications of 2D monoelemental materials formed by group VA and VIA: a concise review

The development of two-dimensional (2D) monoelemental nanomaterials (Xenes) for biomedical applications has generated intensive interest over these years. In this paper, the biomedical applications using Xene-based 2D nanomaterials formed by group VA (e.g., BP, As, Sb, Bi) and VIA (e.g., Se, Te) are elaborated. These 2D Xene-based theranostic nanoplatforms confer some advantages over conventional nanoparticle-based systems, including better photothermal conversion, excellent electrical conductivity, and large surface area. Their versatile and remarkable features allow their implementation for bioimaging and theranostic purposes. This concise review is focused on the current developments in 2D Xenes formed by Group VA and VIA, covering the synthetic methods and various biomedical applications. Lastly, the challenges and future perspectives of 2D Xenes are provided to help us better exploit their excellent performance and use them in practice.