Directional Electromagnetic Interference Shielding Based on Step-Wise Asymmetric Conductive Networks

Stretchable Water-Repellent PEDOT:PSS-Impregnated Polyurethane Nanofiber Mats for Electromagnetic Interference Shielding

High-performance wearable textiles made from poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) hold great promise for electromagnetic interference (EMI) shielding in military and healthcare systems. However, achieving an optimal balance of resilience, flexibility, and electrical properties is challenging due to weak interfacial interactions between PEDOT:PSS and the host substrates. In this study, a robust and stretchable wearable textile fabricated via vacuum-assisted impregnation of PEDOT:PSS is presented onto an electrospun polyurethane (PU) nanofiber mat. The process creates a convoluted interlock network at the interface layer between PEDOT:PSS and PU nanofiber mat, enhanced by the large contact area, effective chemical interactions, and vacuum-induced pressure. This results in exceptional tensile strength of 51.2 MPa, 207% elongation, and 86% elastic recovery, surpassing the practical requirement threshold of wearable textiles and fibers. The robust PU-PEDOT:PSS nanofiber mat shows a normalized EMI shielding effectiveness value of 365.2 dB mm-1 at an ultrathin thickness of 100 µm. This textile is capable of maintaining its shielding performance after continuous loading and unloading cyclic tests up to 100% strain. Additionally, a one-step, durable, fluorine-free spray coating is introduced to protect the textile from moisture and dust, thereby extending its service life for practical outdoor applications.

High-Performance Electromagnetic Interference Shielding and Photothermal Superhydrophobicity Achieved by Nuclear Sheath Stacking in Three-Dimensional Honeycomb Structure and Multi-Level Heterogeneous Interfaces

The unpredictable and extremely cold weather conditions, combined with increasing electromagnetic pollution, have posed a serious threat to human health and socioeconomic well-being. However, existing deicing technologies and electromagnetic interference (EMI) materials lack adaptability to low-temperature, high-humidity environments. This study developed a lightweight asymmetric layered composite foam by integrating multilevel core-shell structures with heterogeneous core-shell fillers into a melamine foam (MF) matrix. Designed to leverage the differences in conductivity and dielectric constant between multiscale heterogeneous interfaces, this composite foam enhances the movement of free electrons and the relative displacement between electrons and atomic nuclei, thereby achieving efficient polarization and conduction losses. More than that, the unique feature of this composite lies in its ″absorption-absorption-reflection-reabsorption″ multilevel structure, enabling the composite to achieve an EMI shielding effectiveness of 70.7 dB in the X-band (8.2-12.4 GHz) and an absorption efficiency of 79.8%. Benefiting from the destructive interference of electromagnetic waves within the layered foam structure, the asymmetric composite foam (MHC-MNPF-ACN) exhibits superior absorption-dominated EMI shielding performance with excellent frequency selectivity. Additionally, by anchoring dual-size fillers onto the MF skeleton via impregnation adsorption to form a honeycomb-like 3D ″light-trapping″ network. This not only allows the composite foam to reach 93.6 °C under 1 sun, enabling rapid deicing within 160 s but also endows it with excellent superhydrophobicity and mechanical properties. These features provide a novel and multifunctional integrated approach to the fabrication of frequency-selective, absorption-dominated EMI shielding materials, proposing a new strategy for the protection of outdoor electromagnetic facilities in extremely low-temperature environments.

Multifunctional Janus-Structured Polytetrafluoroethylene-Carbon Nanotube-Fe3O4/MXene Membranes for Enhanced EMI Shielding and Thermal Management

Herein, a novel Janus-structured multifunctional membrane with integrated electromagnetic interference (EMI) shielding and personalized thermal management is fabricated using shear-induced in situ fibrillation and vacuum-assisted filtration. Interestingly, within the polytetrafluoroethylene (PTFE)-carbon nanotube (CNT)-Fe3O4 layer (FCFe), CNT nanofibers interweave with PTFE fibers to form a stable "silk-like" structure that effectively captures Fe3O4 particles. By incorporating a highly conductive MXene layer, the FCFe/MXene (FCFe/M) membrane exhibits excellent electrical/thermal conductivity, mechanical properties, and flame retardancy. Impressively, benefiting from the rational regulation of component proportions and the design of a Janus structure, the FCFe/M membrane with a thickness of only 84.9 µm delivers outstanding EMI shielding effectiveness of 44.56 dB in the X-band, with a normalized specific SE reaching 10,421.3 dB cm2 g-1, which is attributed to the "absorption-reflection-reabsorption" mechanism. Furthermore, the membrane demonstrates low-voltage-driven Joule heating and fast-response photothermal performance. Under the stimulation of a 3 V voltage and an optical power density of 320 mW cm-2, the surface temperatures of the FCFe/M membranes can reach up to 140.4 and 145.7 °C, respectively. In brief, the FCFe/M membrane with anti-electromagnetic radiation and temperature regulation is an attractive candidate for the next generation of wearable electronics, EMI compatibility, visual heating, thermotherapy, and military and aerospace applications.

Surface and Interfacial Engineering for Multifunctional Nanocarbon Materials

Multifunctional materials are accelerating the development of soft electronics with integrated capabilities including wearable physical sensing, efficient thermal management, and high-performance electromagnetic interference shielding. With outstanding mechanical, thermal, and electrical properties, nanocarbon materials offer ample opportunities for designing multifunctional devices with broad applications. Surface and interfacial engineering have emerged as an effective approach to modulate interconnected structures, which may have tunable and synergistic effects for the precise control over mechanical, transport, and electromagnetic properties. This review presents a comprehensive summary of recent advances empowering the development of multifunctional nanocarbon materials via surface and interfacial engineering in the context of surface and interfacial engineering techniques, structural evolution, multifunctional properties, and their wide applications. Special emphasis is placed on identifying the critical correlations between interfacial structures across nanoscales, microscales, and macroscales and multifunctional properties. The challenges currently faced by the multifunctional nanocarbon materials are examined, and potential opportunities for applications are also revealed. We anticipate that this comprehensive review will promote the further development of soft electronics and trigger ideas for the interfacial design of nanocarbon materials in multidisciplinary applications.

Constructing Grape Bunch Structure Composite Film via Hollow AgNPs Coated Cellulose Nanofibers (CNF@PDA@H-AgNPs)/CNF for Efficient Electromagnetic Shielding, Thermal Conductivity, and Strain Sensing

Achieving high shielding effectiveness in electromagnetic shielding materials relies heavily on high conductivity, yet simultaneously enhancing the absorption loss remains a persistent challenge. Consequently, the study successfully creates efficient electromagnetic shielding composite films with a unique grape-like bunch structure of hollow nanosilver (HCAF) through layer-by-layer assembly. The utilization of poly(dopamine) (PDA) to anchor nanosilver granules (AgNPs) onto cellulose nanofibers (CNF) results in the formation of CNF@PDA@AgNPs. Subsequently, a surface protection etching method is employed to etch the AgNPs, resulting in hollow nanosilver (H-AgNPs) and the generation of CNF@PDA@H-AgNPs. A composite film featuring a grape bunch structure is fabricated by interweaving high aspect ratio CNF with CNF@PDA@H-AgNPs. A substantial quantity of H-AgNPs creates an abundant interface, while the grape bunch structure establishes an efficient conductive network. That enables the composite film to exhibit excellent impedance matching, excellent conductivity loss, abundant polarization loss, and multiple reflection loss. Therefore, the conductivity of the composite film with a thickness of 148.8 μm reaches 212660 S/m, with SET, SEA, and SER 89.56, 79.03, and 10.53 dB in the X band, significantly better than the 76.9, 55.55, and 21.41 dB of the solid AgNPs composite film. The composite film also exhibits remarkable thermal conductivity (The coefficients of in-plane and out-plane thermal conductivity are 4.61 and 0.17 W/(m·K), respectively), mechanical properties, and strain sensing capabilities, making it significant potential for applications in flexible electronics and other related fields.

MOF Derivatives with Gradient Structure Anchored on Carbon Foam for High-Performance Electromagnetic Wave Absorption

The impedance matching and high loss capabilities of composites with homogeneous distribution are limited owing to high addition and lack of structural design. Developing composites with heterogeneous distribution can achieve strong and wide electromagnetic (EM) wave absorption. However, challenges such as complex design and unclear absorption mechanisms still exist. Herein, a novel composite with a heterogeneous distribution gradient is successfully constructed via MOF derivatives Co@ nitrogen-doped carbon (Co@NC) anchored on carbon foam (CF) matrix (MDCF). Notably, the concentration of MOF can easily control the gradient structure. In particular, the morphologies of MOF derivatives on the surface of CF undergo a transition from the collapse of the inner layer to the integrity of the outer layer, accompanied by a continuous reduction in the size of Co nanoparticles. Correspondingly, enhanced interface polarization from the core-shell of Co@NC and good impedance matching of MDCF can be obtained. The optimized MDCF exhibits the minimum reflection loss of -68.18 dB at 2.01 mm and effective absorption bandwidth covering the entire X-band. Moreover, MDCF exhibits lightweight characteristics, excellent compressive strength, and low radar cross-section reduction. This work highlights the immense potential of composites with heterogeneous distribution for achieving high-performance EM wave absorption.

Hollow Metal-Organic Framework/MXene/Nanocellulose Composite Films for Giga/Terahertz Electromagnetic Shielding and Photothermal Conversion

With the continuous advancement of communication technology, the escalating demand for electromagnetic shielding interference (EMI) materials with multifunctional and wideband EMI performance has become urgent. Controlling the electrical and magnetic components and designing the EMI material structure have attracted extensive interest, but remain a huge challenge. Herein, we reported the alternating electromagnetic structure composite films composed of hollow metal-organic frameworks/layered MXene/nanocellulose (HMN) by alternating vacuum-assisted filtration process. The HMN composite films exhibit excellent EMI shielding effectiveness performance in the GHz frequency (66.8 dB at Ka-band) and THz frequency (114.6 dB at 0.1-4.0 THz). Besides, the HMN composite films also exhibit a high reflection loss of 39.7 dB at 0.7 THz with an effective absorption bandwidth up to 2.1 THz. Moreover, HMN composite films show remarkable photothermal conversion performance, which can reach 104.6 °C under 2.0 Sun and 235.4 °C under 0.8 W cm-2, respectively. The unique micro- and macro-structural design structures will absorb more incident electromagnetic waves via interfacial polarization/multiple scattering and produce more heat energy via the local surface plasmon resonance effect. These features make the HMN composite film a promising candidate for advanced EMI devices for future 6G communication and the protection of electronic equipment in cold environments.

Microwave-Absorbing Foams with Adjustable Absorption Frequency and Structural Coloration

Microwave-absorbing materials with regulatable absorption frequency and optical camouflage hold great significance in intelligent electronic devices and advanced stealth technology. Herein, we present an innovative microwave-absorbing foam that can dynamically tune microwave absorption frequencies via a simple mechanical compression while in parallel enabling optical camouflage over broad spectral ranges by adjusting the structural colors. The vivid colors spanning different color categories generated from thin-film interference can be precisely regulated by adjusting the thickness of the conformal TiO2 coatings on Ni/melamine foam. Enhanced interfacial and defect-induced polarizations resulting from the introduction of TiO2 coating synergistically contribute to the dielectric attenuation performance. Consequently, such a foam exhibits exceptional microwave absorption capabilities, and the absorption frequency can be dynamically tuned from the S band to the Ku band by manipulating its compression ratio. Additionally, simulation calculations validate the adjustable electromagnetic wave loss behavior, offering valuable insights for the development of next-generation intelligent electromagnetic devices across diverse fields.

3D Printed Integrated Gradient-Conductive MXene/CNT/Polyimide Aerogel Frames for Electromagnetic Interference Shielding with Ultra-Low Reflection

Construction of advanced electromagnetic interference (EMI) shielding materials with miniaturized, programmable structure and low reflection are promising but challenging. Herein, an integrated transition-metal carbides/carbon nanotube/polyimide (gradient-conductive MXene/CNT/PI, GCMCP) aerogel frame with hierarchical porous structure and gradient-conductivity has been constructed to achieve EMI shielding with ultra-low reflection. The gradient-conductive structures are obtained by continuous 3D printing of MXene/CNT/poly (amic acid) inks with different CNT contents, where the slightly conductive top layer serves as EM absorption layer and the highly conductive bottom layer as reflection layer. In addition, the hierarchical porous structure could extend the EM dissipation path and dissipate EM by multiple reflections. Consequently, the GCMCP aerogel frames exhibit an excellent average EMI shielding efficiency (68.2 dB) and low reflection (R = 0.23). Furthermore, the GCMCP aerogel frames with miniaturized and programmable structures can be used as EMI shielding gaskets and effectively block wireless power transmission, which shows a prosperous application prospect in defense industry and aerospace.

Synergistic Effect of Fe Single-Atom Catalyst for Highly Efficient Microwave-Stimulated Remediation of Chloramphenicol-Contaminated Soil

Chloramphenicol (CAP) has long been used extensively in agriculture and is severely toxic to the biological environment. Microwave catalysis appears a promising method for soil remediation due to its fast and effective heat transfer, but it is challenging to prepare catalysts with good electromagnetic wave absorption and robust catalytic activity. In this study, atomically dispersed Fe on three-dimensional N-doped carbon supports (3D Fe-NC) is firstly used for microwave remediation of soil. Thanks to the synergistic effect of microwave "hot spots" and reactive oxygen species (•OH, •O₂ ^- ), 3D Fe-NC can completely remove 99.9% of CAP in 5 min. The removal rate constant is nearly twice that of commercial activated carbon. Significantly, the germination rate of lettuce seeds in microwave-repaired soil contaminated by CAP reaches 70%. This work demonstrates the application of Fe single-atom catalyst in microwave remediation of contaminated soil, providing a novel insight for agricultural soil remediation.

Absorption Dominated Directional Electromagnetic Interference Shielding through Asymmetry in a Multilayered Construct with an Exceptionally High Green Index

Fabricating green electromagnetic interference (EMI) shields is the need of the hour because strong secondary reflections in the vicinity of the shield adversely affect the environment and the reliability of the neighboring devices. To this end, the present work aims to maximize the absorption-based EMI shielding through a multilayered construct comprising a porous structure (pore size less than λ/5), a highly conducting entity, and a layer to match the impedance. The elements of this construct were positioned so that the incoming electromagnetic (EM) radiation interacts with the other layers of the construct before the conducting entity. This positioning of the layers in the construct offers a high green shielding index (g_s) and low reflection coefficient (R ∼ 0.1) with an exceptionally high percent absorption (up to 99%). Polyurethane (PU) foams were fabricated using the salt-leaching technique and strategically positioned with carbon nanotube (CNT) papers and polycarbonate (PC)-based films to obtain symmetric and asymmetric constructs. These structures were then employed to gain mechanistic insight into the directional dependency of shielding performance, g_s, and heat dissipation ability. Interestingly, maximum total shielding effectiveness (SE_T) of -52 dB (88% absorption @8.2 GHz) and specific shielding effectiveness/thickness (SSE_t) of -373 dB/cm²g were achieved for a symmetric construct whereas, for the asymmetric construct, the SE_T and SSE_t were -37 dB and -280 dB/cm²g, respectively, with an exceptionally high g_s of 8.6, the highest reported so far. The asymmetricity in the construct led to directional dependence of the absorption component (% SE_A, shielding effectiveness due to absorption) and heat dissipation, primarily governed by the electrical and thermal conductivity gradient, respectively. This study opens new avenues in this field and reports constructs with an exceptionally high green index.

Interconnected MXene/Graphene Network Constructed by Soft Template for Multi-Performance Improvement of Polymer Composites

The multi-functionalization of polymer composites refers to the ability to connect multiple properties through simple structural design and simultaneously achieve multi-performance optimization. The large-scale design and mass production to realize the reasonable structure design of multifunctional polymer composites are urgently remaining challenges. Herein, the multifunctional MXene/graphene/polymer composites with three-dimensional thermally and electrically conductive network structures are fabricated via the utilization of the microstructure of the soft template, and a facile dispersion dip-coating approach. As a result, the polymer composites have a multi-performance improvement. At the MXene and graphene content of 18.7 wt%, the superior through-plane thermal conductivity of polymer composite is 2.44 W m^-1 K^-1, which is 1118% higher than that of the polymer matrix. The electromagnetic interference (EMI) shielding effectiveness of the sample reaches 43.3 dB in the range of X-band. And the mechanical property of the sample has advanced 4 times compared with the polymer matrix. The excellent EMI shielding and thermal management performance, along with the effortless and easy-to-scalable producing techniques, imply promising perspectives of the polymer composites in the next-generation smart electronic devices.