Human immunodeficiency viral protease is catalytically active as a fusion protein: characterization of the fusion and native enzymes produced in Escherichia coli

Bioinspired supramolecular engineering of self-assembling immunofibers for high affinity binding of immunoglobulin G

Many one-dimensional (1D) nanostructures are constructed by self-assembly of peptides or peptide conjugates containing a short β-sheet sequence as the core building motif essential for the intermolecular hydrogen bonding that promotes directional, anisotropic growth of the resultant assemblies. While this molecular engineering strategy has led to the successful production of a plethora of bioactive filamentous β-sheet assemblies for interfacing with biomolecules and cells, concerns associated with effective presentation of α-helical epitopes and their function preservation have yet to be resolved. In this context, we report on the direct conjugation of the protein A mimicking peptide Z33, a motif containing two α-helices, to linear hydrocarbons to create self-assembling immuno-amphiphiles (IAs). Our results suggest that the resulting amphiphilic peptides can, despite lacking the essential β-sheet segment, effectively associate under physiological conditions into supramolecular immunofibers (IFs) while preserving their native α-helical conformation. Isothermal titration calorimetry (ITC) measurements confirmed that these self-assembling immunofibers can bind to the human immunoglobulin G class 1 (IgG1) with high specificity at pH 7.4, but with significantly weakened binding at pH 2.8. We further demonstrated the accessibility of Z33 ligand in the immunofibers using transmission electron microscopy (TEM) and confocal imaging. We believe these results shed important light into the supramolecular engineering of α-helical peptides into filamentous assemblies that may possess an important potential for antibody isolation.

Mechanisms of alpha1-antitrypsin inhibition of cellular serine proteases and HIV-1 protease that are essential for HIV-1 morphogenesis

Proprotein processing is essential for HIV infectivity. Cellular trans-Golgi network (TGN) serine proteases (e.g., furin) are required to cleave HIV envelope gp160 to gp120. In addition, HIV protease (PR), an aspartyl protease, cleaves p55(Gag) to p24, etc., in budding virions. alpha1-Antitrypsin (alpha(1)AT) is cleaved by serine proteases, causing a conformational change in alpha(1)AT that sequesters and so inactivates the protease. alpha(1)AT blocks both gp160 and p55 processing, and so is a powerful inhibitor of HIV replication. We hypothesized that alpha(1)AT inhibited gp160 and p55 processing via different mechanisms, and that in both cases, alpha(1)AT bound and was itself cleaved by the proteases whose activities were blocked. alpha(1)AT delivered by SV(AT), a recombinant, Tag-deleted SV40-derived vector, localized to the TGN, co-precipitated with furin, and depleted furin from the TGN. After SV(AT) transduction and HIV challenge, alpha(1)AT was detected in resulting nascent immature HIV-1 virions. alpha(1)AT also blocked incorporation of the enzymatically active dimeric form of PR into HIV virions. Western analysis using recombinant proteins showed that alpha(1)AT directly bound HIV PR, and was cleaved by it. The simultaneous inhibition of two different steps in HIV morphogenesis both increases alpha(1)AT antilentiviral activity and decreases the possibility that HIV mutations will allow escape from inhibition.

Optimized bacterial expression of human apolipoprotein A-I

Apolipoprotein A-I (apoA-I) serves critical functions in plasma lipoprotein metabolism as a structural component of high density lipoprotein, activator of lecithin:cholesterol acyltransferase, and acceptor of cellular cholesterol as part of the reverse cholesterol transport pathway. In an effort to facilitate structure:function studies of human apoA-I, we have optimized a plasmid vector for production of recombinant wild type (WT) and mutant apoA-I in bacteria. To facilitate mutagenesis studies, subcloning, and DNA manipulation, numerous silent mutations have been introduced into the apoA-I cDNA, generating 13 unique restriction endonuclease sites. The coding sequence for human apoA-I has been modified by the introduction of additional silent mutations that eliminate 18 separate codons that employ tRNAs that are of low or moderate abundance in Escherichia coli. Yields of recombinant apoA-I achieved using the optimized cDNA were 100+/-20 mg/L bacterial culture, more than fivefold greater than yields routinely obtained with the original cDNA. Site-directed mutagenesis of the apoA-I cDNA was performed to generate a Glu2Asp mutation in the N-terminal sequence of apoA-I. This modification, which creates an acid labile Asp-Pro peptide bond between amino acids 2 and 3, permits specific chemical cleavage of an N-terminal His-Tag fusion peptide used for rapid protein purification. The product protein's primary structure is identical to WT apoA-I in all other respects. Together, these changes in apoA-I cDNA and bacterial expression protocol significantly improve the yield of apoA-I protein without compromising the relative ease of purification.

Proteolytic processing of HIV-1 protease precursor, kinetics and mechanism

Previously it was demonstrated using a model precursor that processing at the N terminus of the HIV-1 protease (PR) precedes processing at its C terminus. We now show the expression, purification, and kinetics of the autoprocessing reaction of a PR precursor linked to 53 amino acids of the native flanking transframe region (DeltaTFP-p6(pol)) of Gag-Pol and containing its two native cleavage sites. The PR contains the two cysteine residues exchanged to alanines, mutations that do not alter the kinetics or the structural stability of the mature PR. DeltaTFP-p6(pol)-PR, which encompasses the known PR inhibitor sequence Glu-Asp-Leu within DeltaTFP, undergoes cleavage at the DeltaTFP/p6(pol) and p6(pol)/PR sites in two consecutive steps to produce the mature PR. Both DeltaTFP-p6(pol)-PR and p6(pol)-PR exhibit low intrinsic enzymatic activity. The appearance of the mature PR is accompanied by a large increase in catalytic activity. It follows first-order kinetics in protein concentration with a rate constant of 0.13 +/- 0.01 min(-1) in 0.1 M acetate at pH 4.8. The pH-rate profile for the observed first-order rate constant is bell-shaped with two ionizable groups of pK(a) 4.9 and 5.1. The rate constant also exhibits approximately 7-fold higher sensitivity to urea denaturation as compared with that of the mature PR, suggesting that the cleavage at the N terminus of the PR domain from the precursor leads to the stabilization of the dimeric structure.

Gag protein from human immunodeficiency virus type 1 assembles in the absence of cyclophilin A

Human immunodeficiency virus type 1 (HIV-1) replication requires coordinated activities of host and viral factors. We reported previously that interactions of the host factor cyclophilin A with HIV-1 Gag polyproteins affected Gag processing and maturation of virus particles (Streblow et al., 1998. Virology 245, 197-202). We now use in vitro translation and physical analysis of Gag structures to refine our understanding of how cyclophilin A affects HIV-1 replication. Gag assembled into oligomeric structures in vitro in the presence or absence of cyclophilin A, and proteins synthesized under the two conditions were equally susceptible to cleavage by exogenous HIV-1 protease. These and previous data show that Cyclophilin A is required at a step between Gag assembly and Gag processing/virion morphogenesis. Cyclophilin A may be required for Gag conformational changes subsequent to assembly, that are required for efficient dimerization and activation of the viral protease.

Functional characterization of roles of GalR and GalS as regulators of the gal regulon

An isorepressor of the gal regulon in Escherichia coli, GalS, has been purified to homogeneity. In vitro DNase I protection experiments indicated that among operators of the gal regulon, GalS binds most strongly to the external operator of the mgl operon, which encodes the high-affinity beta-methylgalactoside galactose transport system, and with less affinity to the operators controlling expression of the gal operon, which codes for enzymes of galactose metabolism. GalS has even less affinity for the external operator of galP, which codes for galactose permease, the major low-affinity galactose transporter in the cell. This order of affinities is the reverse of that of GalR, which binds most strongly to the operator of galP and most weakly to that of mgl. Our results also show that GalS, like its homolog, GalR, is a dimeric protein which in binding to the bipartite operators of the gal operon selectively represses its P1 promoter. Consistent with the fact that GalR is the exclusive regulator of the low-affinity galactose transporter, galactose permease, and that the major role of GalS is in regulating expression of the high-affinity galactose transporter encoded by the mgl operon, we found that the DNA binding of GalS is 15-fold more sensitive than that of GalR to galactose.

HIV-I protease. Cloning, expression, and purification

A new method for obtaining HIV-I protease was suggested. Fusion proteins composed of the N-terminal fragment of human gamma-interferon and HIV-I protease connected with (Asp)4Lys (protein I) or Asp-Pro (protein II) linkers were expressed in Escherichia coli cells. The fusion proteins were produced as insoluble inclusion bodies in the 20% yield of total cell protein. Protein I was cleaved by enterokinase. The solubility of protein I was increased by treating with Na-sulfite/Na-tetrathionate under denaturing conditions. Optimal conditions for efficient acidic hydrolysis of protein II at Asp-Pro bond were found. The hydrolysis products were separated by reversed-phase FPLC. The amount of tryptophan and cysteine residues in the enzyme obtained was estimated. The activity of HIV-I protease was determined using the chromogenic peptide. AlaArgVal NleNphGluAlaNleNH2 and a high-mol-wt substrate consisting of beta-galactosidase and a fragment of gag proteins, including p17-p24 processing site.

A transient precursor of the HIV-1 protease. Isolation, characterization, and kinetics of maturation

Recently, the mechanism of autoprocessing of the protease (PR) of the human immunodeficiency virus type 1 from the model polyprotein, MBP-DeltaTF-PR-DeltaPol, which contains the protease linked to short native flanking sequences (DeltaTF and DeltaPol) fused to the maltose binding protein (MBP) of Escherichia coli, was reported (Louis, J. M., Nashed, N. T., Parris, K. D., Kimmel, A. R., and Jerina, D. M. (1994) Proc. Natl. Acad. Sci. U. S. A. 91, 7970-7974). According to this mechanism, intramolecular cleavage of the N-terminal strands of the dimeric MBP-DeltaTF-PR-DeltaPol protein leads to the formation of the PR-DeltaPol intermediate, which is subsequently converted to the mature protease by cleavage of the C-terminal strands. We now report the purification and characterization of the PR-DeltaPol intermediate and the kinetics of its processing to the mature protease. Unlike the MBP-DeltaTF-PR-DeltaPol precursor, PR-DeltaPol has proteolytic activity similar to that of the mature enzyme at pH 5.0. The pH rate profile for kcat/Km is similar to that of the mature protease above pH 4.0. Although the PR-DeltaPol is more sensitive than the mature protease toward denaturing reagents, both the enzymatic activity and the intrinsic fluorescence of PR-DeltaPol are linearly dependent on the protein concentration, indicating that the protein is largely in its dimeric form above 10 nM. In contrast to the first-order kinetics observed for the proteolytic reaction at the N terminus of the protease, the proteolytic reaction at the C terminus of the protease is second order in protein concentration. These results are discussed in terms of a mechanism in which the C-terminally located DeltaPol peptide chains are cleaved intermolecularly to release the mature protease.

Assay of HIV-1 protease activity by use of crude preparations of enzyme and biotinylated substrate

An enzyme immunoassay was developed for monitoring protease reactions of human immunodeficiency virus (HIV). The protease and its substrate, the gag precursor, were generated separately in Escherichia coli. The HIV-1 protease was generated with a glutathione-S-transferase expression system and the gag substrate, named Pin17/24, was prepared with a PinPoint expression system. Pin17/24 consists of an N-terminal peptide, which is biotinylated in E. coli, fused with a C-terminal peptide that contains a protease cleavage site flanked by p17 and p24 segments. Through its biotin in the N-terminal region, Pin17/24 bound to ELISA plates coated with avidin, whereas through its C-terminal region, the same molecule of Pin17/24 could be recognized by an anti-p24 monoclonal antibody. When the protease was added to Pin17/24, the p24 fragment was released from the biotinylated fusion protein and could no longer be retained on the avidin plates, and as a result, binding of the anti-p24 monoclonal antibody decreased. The binding was specific and the reaction was inhibited by a known HIV protease inhibitor. Due to the specific interactions between avidin and biotin, monoclonal antibody and antigen, and the HIV protease and the gag substrate, crude preparations of these reagents can be used readily in the assay. The simplicity and feasibility of this method should be useful for simultaneous monitoring of many enzyme reactions, particularly for screening possible HIV protease inhibitors.

Stability of dimeric retroviral proteases

The determination of dimer stabilities for the retroviral proteases has proved more challenging than anticipated, but it is a tractable problem when careful attention is made to potential interferences. For investigations of retroviral proteases not yet characterized, the fundamentally rigorous sedimentation equilibrium and other biophysical techniques may yet provide useful Kd values. They are preferable to the indirect methods emphasized in this chapter but nevertheless should be coupled with basic considerations such as recovery of activity at the end of an experiment and the relevance of values obtained to other situations. In the likely event that nanomolar Kd values are encountered in new investigations, the assay techniques provide the most readily available methods for many laboratories. Because these methods are sensitive to anything that affects enzyme activity, the use of complementary methods to verify dimerization constants is imperative. Inactivating reactions not due to monomer formation should be explored, and the potential impact of those reactions on the constants being measured should be estimated. Most of the Kd and dimerization rate data available for retroviral proteases are obtained with the HIV-1 protease, with each investigator choosing methods and solvent conditions different from the others. The confusing diversity of results should be the impetus for a direct comparison of methods for the identification of the sources of differences. If more comprehensive and rigorous measures of the kinetics and thermodynamics of subunit aggregation are obtained, they might be coupled with the large volume of detailed structural data accumulating for this class of protein to provide insights into more general problems of protein-folding chemistry.

Cloning, expression and purification of a recombinant poly-histidine-linked HIV-1 protease

The gene coding for the HIV-1 protease was cloned in an Escherichia coli expression vector adding three-histidine codons to the amino and carboxy terminus of the protease sequence. Expression of the protease from this construct led to the accumulation of high amounts of insoluble histidine-linked protease entrapped in inclusion bodies. The histidine-linked protease could be efficiently released from purified inclusion bodies with 6 M guanidine hydrochloride and further purified by metal chelate affinity chromatography. The refolded protease cleaved synthetic peptide substrates and the viral polyprotein p55 with the same specificity as the wild type protease. It displays a specific activity of 4.4 mumol/min/mg.

Fusions to the 5' end of a gene encoding a two-domain analogue of staphylococcal protein A

A novel gene fusion system has been constructed for fusions to the 5' end of gene zz, encoding a two-domain analogue of staphylococcal protein A designated ZZ. Four different genes were fused to the 5' end of zz, and their gene products were analyzed. One of the genes encodes a protein located intracellularly in Escherichia coli and the other three genes encode gene products destined for secretion across the cytoplasmic membrane by the presence of an amino terminal signal sequence. After production in E. coli, the fusion proteins were purified in a single step by IgG-affinity chromatography. The purified ZZ fusions could be used directly for amino terminal sequencing to confirm the start of translation of the intracellular product and the processing of the signal peptide of the translocated products. This is the first example of ZZ fusions to the C-terminus of gene products. To simplify the general use of fusions to the 5' end of zz, a new plasmid vector was constructed containing a multi restriction enzyme cloning linker and the lacZ' gene which enables screening for production in alpha-complementing supE strains of E. coli on indicator plates.

Investigating the stereochemistry of binding to HIV-1 protease with inhibitors containing isomers of 4-amino-3-hydroxy-5-phenylpentanoic acid

A series of inhibitors containing all possible isomers of 4-amino-3-hydroxy-5-phenylpentanoic acid was synthesized and tested for inhibition of HIV-1 protease. Incorporation of the (3S,4S) isomer of the t-butyloxycarbonyl protected amino acid into the sequence Glu-Phe resulted in a potent inhibitor of HIV-1 protease (Ki = 63 nM). This inhibitor is at least 47-times more potent than the inhibitors containing other isomers of 4-amino-3-hydroxy-5-phenylpentanoic acid, indicating that the (3S,4S) isomer is the preferred isomer for binding to HIV-1 protease.

Thrombin and H64A subtilisin cleavage of fusion proteins for preparation of human recombinant parathyroid hormone

Human parathyroid hormone, hPTH, an 84 amino acid polypeptide, was produced intracellularly in Escherichia coli as a fusion protein, linked to the C-terminus of a 15 kD IgG-binding protein. Approximately 100 mg fusion protein was obtained per liter fermentation medium. To test the efficiency of two alternative enzymatic cleavage methods, two fusion proteins differing only in the linker region were constructed. Cleavage of a Phe-Phe-Pro-Arg linker was obtained with bovine thrombin and cleavage of a Phe-Ala-His-Tyr linker with recombinant H64A subtilisin. Both enzymes yielded the correct N-terminus and cleaved their respective linkers quantitatively, although additional internal cleavage sites in hPTH were detected and characterized. The linker cleavage conditions were optimized and hPTH was purified to homogeneity. Thrombin cleavage resulted in a final yield of 5 mg hPTH/L, while H64A subtilisin cleavage was more specific and gave 8 mg/L. The purified recombinant product was identical to native hPTH and exhibited full biological activity in an adenylate cyclase assay.

Copper inhibits the protease from human immunodeficiency virus 1 by both cysteine-dependent and cysteine-independent mechanisms

The protease of the human immunodeficiency virus is essential for replication of the virus, and the enzyme is therefore an attractive target for antiviral action. We have found that the viral protease is inhibited by approximately stoichiometric concentrations of copper or mercury ions. Inactivation by Cu2+ was rapid and not reversed by subsequent exposure to EDTA or dithiothreitol. Direct inhibition by Cu2+ required the presence of cysteine residue(s) in the protease. Thus, a synthetic protease lacking cysteine residues was not inhibited by exposure to copper. However, addition of dithiothreitol as an exogenous thiol rendered even the synthetic protease susceptible to inactivation by copper. Oxygen was not required for inactivation of either the wild-type or the synthetic protease. These results provide the basis for the design of novel types of protease inhibitors.

Fusion tails for the recovery and purification of recombinant proteins

Several fusion tail systems have been developed to promote efficient recovery and purification of recombinant proteins from crude cell extracts or culture media. In these systems, a target protein is genetically engineered to contain a C- or N-terminal polypeptide tail, which provides the biochemical basis for specificity in recovery and purification. Tails with a variety of characteristics have been used: (1) entire enzymes with affinity for immobilized substrates or inhibitors; (2) peptide-binding proteins with affinity to immunoglobulin G or albumin; (3) carbohydrate-binding proteins or domains; (4) a biotin-binding domain for in vivo biotination promoting affinity of the fusion protein to avidin or streptavidin; (5) antigenic epitopes with affinity to immobilized monoclonal antibodies; (6) charged amino acids for use in charge-based recovery methods; (7) poly(His) residues for recovery by immobilized metal affinity chromatography; and (8) other poly(amino acid)s, with binding specificities based on properties of the amino acid side chain. Fusion tails are useful at the lab scale and have potential for enhancing recovery using economical recovery methods that are easily scaled up for industrial downstream processing. Fusion tails can be used to promote secretion of target proteins and can also provide useful assay tags based on enzymatic activity or antibody binding. Many fusion tails do not interfere with the biological activity of the target protein and in some cases have been shown to stabilize it. Nevertheless, for the purification of authentic proteins a site for specific cleavage is often included, allowing removal of the tail after recovery.