Dielectrophoresis of chloroplasts

Fabrication of a new all-in-one microfluidic dielectrophoresis integrated chip and living cell separation

Microfluidic dielectrophoresis (DEP) technology has been applied to many devices to perform label-free target cell separation. Cells separated by these devices are used in laboratories, mainly for medical research. The present study designed a microfluidic DEP device to fabricate a rapid and semiautomated cell separation system in conjunction with microscopy to enumerate the separated cells. With this device, we efficiently segregated bacterial cells from liquid products and enriched one cell type from two mixed eukaryotic cell types. The device eliminated sample pretreatment and established cell separation by all-in-one operation in a lab-on-chip, requiring only a small sample volume (0.5–1 mL) to enumerate the target cells and completing the entire separation process within 30 min. Such a rapid cell separation technique is in high demand by many researchers to promptly characterize the target cells.

•

A new all-in-one microfluidic dielectrophoresis integrated chip is fabricated

•

Simultaneous operation of buffer exchange and continuous cell separation on a chip

•

Chip’s cell separation performance is evaluated with bacterial and eukaryotic cells

Fifty years of dielectrophoretic cell separation technology

In 1966, Pohl and Hawk [Science 152, 647-649 (1966)] published the first demonstration of dielectrophoresis of living and dead yeast cells; their paper described how the different ways in which the cells responded to an applied nonuniform electric field could form the basis of a cell separation method. Fifty years later, the field of dielectrophoretic (DEP) cell separation has expanded, with myriad demonstrations of its ability to sort cells on the basis of differences in electrical properties without the need for chemical labelling. As DEP separation enters its second half-century, new approaches are being found to move the technique from laboratory prototypes to functional commercial devices; to gain widespread acceptance beyond the DEP community, it will be necessary to develop ways of separating cells with throughputs, purities, and cell recovery comparable to gold-standard techniques in life sciences, such as fluorescence- and magnetically activated cell sorting. In this paper, the history of DEP separation is charted, from a description of the work leading up to the first paper, to the current dual approaches of electrode-based and electrodeless DEP separation, and the path to future acceptance outside the DEP mainstream is considered.

Microfabrication technologies in dielectrophoresis applications--a review

DEP is an established technique for particle manipulation. Although first demonstrated in the 1950s, it was not until the development of miniaturization techniques in the 1990s that DEP became a popular research field. The 1990s saw an explosion of DEP publications using microfabricated metal electrode arrays to sort a wide variety of cells. The concurrent development of microfluidics enabled devices for flow management and better understanding of the interaction between hydrodynamic and electrokinetic forces. Starting in the 2000s, alternative techniques have arisen to overcome common problems in metal-electrode DEP, such as electrode fouling, and to increase the throughput of the system. Insulator-based DEP and light-induced DEP are the most significant examples. Most recently, new 3D techniques such as carbon-electrode DEP, contactless DEP, and the use of doped PDMS have further simplified the fabrication process. The constant desire of the community to develop practical solutions has led to devices which are more user friendly, less expensive, and are capable of higher throughput. The state-of-the-art of fabricating DEP devices is critically reviewed in this work. The focus is on how different fabrication techniques can boost the development of practical DEP devices to be used in different settings such as clinical cell sorting and infection diagnosis, industrial food safety, and enrichment of particle populations for drug development.

Dielectrophoretic properties of yeast cells dividing by budding and by transversal fission

The dielectrophoretic behaviour of yeast cells dividing by budding or by transversal fission was analyzed. The results obtained show that the dielectrophoretic yield is a linear function of alternating voltage, cell concentration and the square root of the time of collection in all the species assayed. Dependence of the rate of collection on the frequency of the voltage applied (between 0.2 and 5 MHz) was also found. This behaviour is similar in the three microorganisms studied. The scale factor correlating the frequency spectrum for Saccharomyces cerevisiae and Saccharomycopsis lipolytica is proportional to cell size. However, these results can not be extended to Schizosaccharomyces pombe. A relationship between the dielectrophoretic yield and the age of the culture and the consumption of glucose has been established for the three yeast strains. Dielectrophoresis also permits the differentiation between viable and non-viable cells.

Continuous dielectrophoretic separation of cell mixtures

Use of stream-centered dielectrophoresis (1-4) produced continuous separations on three cell mixtures (1) Chorella vulgaris with Netrium digitus, (2) Ankistrodesmus falcatus with Staurastrum gracile, and (3) Saccharomyces cerevisiae with Netrium digitus. Maximal separations were obtained for these mixtures of live cells at 100 kHz, 600 kHz, and 2.0 MHz, respectively. The technique was restricted to a frequency range of 0.01-32 MHz, and to suspensions of low conductivity in which microorganisms such as these algae and yeast are tolerant. Extension, however, to cellular organisms requiring higher osmolarity is readily feasible through the use of nonionic solutes such as sucrose, mannose, glycine, etc.