Phase transition release, a new approach to the interaction of proteins with lipid vesicles. Application to lipoproteins

Drug Design: Do Not Forget the Supramolecular Factor

A major challenge currently facing medicinal chemists is designing agents that can selectively destroy drug resistant fungi and bacteria that have begun to emerge. One factor that has been overlooked by virtually all drug discovery/development approaches is the supramolecular factor, in which aggregated forms of a drug candidate exhibit low selectivity in destroying targeted cells while the corresponding monomers exhibit high selectivity. This Perspective discusses how we were led to the supramolecular factor through fundamental studies with simple model systems, how we reasoned that the selectivity of monomers of the antifungal agent amphotericin B should be much greater than the selectivity of the corresponding aggregates, and how we confirmed this hypothesis using derivatives of amphotericin B. In a broader context, these findings provide a strong rationale for considering the supramolecular factor in the design of new drug candidates and the testing of virtually all of them.

Interplay of Fusion, Leakage, and Electrostatic Lipid Clustering: Membrane Perturbations by a Hydrophobic Antimicrobial Polycation

Membrane active compounds are able to induce various types of membrane perturbations. Natural or biomimetic candidates for antimicrobial treatment or drug delivery scenarios are mostly designed and tested for their ability to induce membrane permeabilization, also termed leakage. Furthermore, the interaction of these usually cationic amphiphiles with negatively charged vesicles often causes colloidal instability leading to vesicle aggregation or/and vesicle fusion. We show the interplay of these modes of membrane perturbation in mixed phosphatidyl glycerol (PG)/phosphatidyl ethanolamine (PE) by the statistical copolymer MM:CO comprising, both, charged and hydrophobic subunits. MM:CO is a representative of partially hydrophobic, highly active, but less selective antimicrobial polycations. Cryo-electron microscopy indicates vesicle fusion rather than vesicle aggregation upon the addition of MM:CO to negatively charged PG/PE (1:1) vesicles. In a combination of fluorescence-based leakage and fusion assays, there is support for membrane permeabilization and pronounced vesicle fusion activity as distinct effects. To this end, membrane fusion and aggregation were prevented by including lipids with polyethylene glycol attached to their head groups (PEG-lipids). The leakage activity of MM:CO is very similar in the absence and presence of PEG-lipids. Vesicle aggregation and fusion however are largely suppressed. This strongly suggests that MM:CO induces leakage by asymmetric packing stress because of hydrophobically driven interactions which could lead to leakage. As a further membrane perturbation effect, MM:CO causes lipid clustering in model vesicles. We address potential artifacts and misinterpretations of experiments characterizing leakage and fusion. Additional to the leakage activity, the pronounced fusogenic activity of the polymer and potentially of many other similar compounds likely has implications for antimicrobial activity and beyond.

Non-Polar Lipids as Regulators of Membrane Properties in Archaeal Lipid Bilayer Mimics

The modification of archaeal lipid bilayer properties by the insertion of apolar molecules in the lipid bilayer midplane has been proposed to support cell membrane adaptation to extreme environmental conditions of temperature and hydrostatic pressure. In this work, we characterize the insertion effects of the apolar polyisoprenoid squalane on the permeability and fluidity of archaeal model membrane bilayers, composed of lipid analogues. We have monitored large molecule and proton permeability and Laurdan generalized polarization from lipid vesicles as a function of temperature and hydrostatic pressure. Even at low concentration, squalane (1 mol%) is able to enhance solute permeation by increasing membrane fluidity, but at the same time, to decrease proton permeability of the lipid bilayer. The squalane physicochemical impact on membrane properties are congruent with a possible role of apolar intercalants on the adaptation of Archaea to extreme conditions. In addition, such intercalant might be used to cheaply create or modify chemically resistant liposomes (archeaosomes) for drug delivery.

Characterisation of a synthetic Archeal membrane reveals a possible new adaptation route to extreme conditions

It has been proposed that adaptation to high temperature involved the synthesis of monolayer-forming ether phospholipids. Recently, a novel membrane architecture was proposed to explain the membrane stability in polyextremophiles unable to synthesize such lipids, in which apolar polyisoprenoids populate the bilayer midplane and modify its physico-chemistry, extending its stability domain. Here, we have studied the effect of the apolar polyisoprenoid squalane on a model membrane analogue using neutron diffraction, SAXS and fluorescence spectroscopy. We show that squalane resides inside the bilayer midplane, extends its stability domain, reduces its permeability to protons but increases that of water, and induces a negative curvature in the membrane, allowing the transition to novel non-lamellar phases. This membrane architecture can be transposed to early membranes and could help explain their emergence and temperature tolerance if life originated near hydrothermal vents. Transposed to the archaeal bilayer, this membrane architecture could explain the tolerance to high temperature in hyperthermophiles which grow at temperatures over 100 °C while having a membrane bilayer. The induction of a negative curvature to the membrane could also facilitate crucial cell functions that require high bending membranes.

Is the Membrane Lipid Matrix a Key Target for Action of Pharmacologically Active Plant Saponins?

This study was focused on the molecular mechanisms of action of saponins and related compounds (sapogenins and alkaloids) on model lipid membranes. Steroids and triterpenes were tested. A systematic analysis of the effects of these chemicals on the physicochemical properties of the lipid bilayers and on the formation and functionality of the reconstituted ion channels induced by antimicrobial agents was performed. It was found that digitonin, tribulosin, and dioscin substantially reduced the boundary potential of the phosphatidylcholine membranes. We concluded that saponins might affect the membrane boundary potential by restructuring the membrane hydration layer. Moreover, an increase in the conductance and lifetime of gramicidin A channels in the presence of tribulosin was due to an alteration in the membrane dipole potential. Differential scanning microcalorimetry data indicated the key role of the sapogenin core structure (steroid or triterpenic) in affecting lipid melting and disordering. We showed that an alteration in pore forming activity of syringomycin E by dioscin might be due to amendments in the lipid packing. We also found that the ability of saponins to disengage the fluorescent marker calcein from lipid vesicles might be also determined by their ability to induce a positive curvature stress.

The antimicrobial peptide Polybia-MP1 differentiates membranes with the hopanoid, diplopterol from those with cholesterol

Polybia-MP1 is an antimicrobial peptide that shows a decreased activity in membranes with cholesterol (CHO). Since it is now accepted that hopanoids act as sterol-surrogates in some sterol-lacking bacteria, we here inquire about the impact of Polybia-MP1 on membranes containing the hopanoid diplopterol (DP) in comparison to membranes with CHO. We found that, despite the properties induced on lipid membranes by DP are similar to those induced by CHO, the effect of Polybia-MP1 on membranes with CHO or DP was significantly different. DP did not prevent dye release from LUVs, nor the insertion of Polybia-MP1 into monolayers, and peptide-membrane affinity was higher for those with DP than with CHO. Zeta potentials ( ζ ) for DP-containing LUVs showed a complex behavior at increasing peptide concentration. The effect of the peptide on membrane elasticity, investigated by nanotube retraction experiments, showed that peptide addition softened all membrane compositions, but membranes with DP got stiffer at long times. Considering this, and the ζ results, we propose that peptides accumulate at the interface adopting different arrangements, leading to a non-monotonic behavior. Possible correlations with cell membranes were inquired testing the antimicrobial activity of Polybia-MP1 against hopanoid-lacking bacteria pre-incubated with DP or CHO. The fraction of surviving cells was lower in cultures incubated with DP compared to those incubated with CHO. We propose that the higher activity of Polybia-MP1 against some bacteria compared to mammalian cells is not only related to membrane electrostatics, but also the composition of neutral lipids, particularly the hopanoids, could be important.

Mode-of-Action of Antimicrobial Peptides: Membrane Disruption vs. Intracellular Mechanisms

Antimicrobial peptides are an attractive alternative to traditional antibiotics, due to their physicochemical properties, activity toward a broad spectrum of bacteria, and mode-of-actions distinct from those used by current antibiotics. In general, antimicrobial peptides kill bacteria by either disrupting their membrane, or by entering inside bacterial cells to interact with intracellular components. Characterization of their mode-of-action is essential to improve their activity, avoid resistance in bacterial pathogens, and accelerate their use as therapeutics. Here we review experimental biophysical tools that can be employed with model membranes and bacterial cells to characterize the mode-of-action of antimicrobial peptides.

Quantified Membrane Permeabilization Indicates the Lipid Selectivity of Membrane-Active Antimicrobials

Most antimicrobial peptides (AMPs) and their synthetic mimics (SMAMPs) are thought to act by permeabilizing cell membranes. For antimicrobial therapy, selectivity for pathogens over mammalian cells is a key requirement. Understanding membrane selectivity is thus essential for designing AMPs and SMAMPs to complement classical antibiotics in the future. This study focuses on membrane permeabilization induced by SMAMPs and their selectivity for membranes with different lipid compositions. We measure release and fluorescence lifetime of a self-quenching dye in lipid vesicles. Apart from the dose-response, we quantify the strength of individual leakage events, and, employing cumulative kinetics, categorize permeabilization behavior. We propose that differing selectivities in a series of SMAMPs arise from a combination of the effect of the antimicrobial agent and the susceptibility of the membrane (with a given lipid composition) for certain types of leakage behavior. The unselective and hemolytic SMAMP is found to act mainly by the asymmetry stress mechanism, mediated by hydrophobic insertion of SMAMPs into lipid layers. The more selective SMAMPs induced leakage events occurring stochastically over several hours. Lipid intrinsic properties might additionally amplify the efficiency of leakage events. Leakage behavior changes with both the design of the SMAMP and the lipid composition of the membrane. Understanding how leakage behavior contributes to the selectivity and activity of antimicrobial agents will aid the design and screening of antimicrobials. An understanding of the underlying processes facilitates the comparison of membrane permeabilization across in vitro and in vivo assays.

Synthetic Lugdunin Analogues Reveal Essential Structural Motifs for Antimicrobial Action and Proton Translocation Capability

Lugdunin, a novel thiazolidine cyclopeptide, exhibits micromolar activity against methicillin-resistant Staphylococcus aureus (MRSA). For structure-activity relationship (SAR) studies, synthetic analogues obtained from alanine and stereo scanning as well as peptides with modified thiazolidine rings were tested for antimicrobial activity. The thiazolidine ring and the alternating d- and l-amino acid backbone are essential. Notably, the non-natural enantiomer displays equal activity, thus indicating the absence of a chiral target. The antibacterial activity strongly correlates with dissipation of the membrane potential in S. aureus. Lugdunin equalizes pH gradients in artificial membrane vesicles, thereby maintaining membrane integrity, which demonstrates that proton translocation is the mode of action (MoA). The incorporation of extra tryptophan or propargyl moieties further expands the diversity of this class of thiazolidine cyclopeptides.

Mechanistic Landscape of Membrane-Permeabilizing Peptides

Membrane permeabilizing peptides (MPPs) are as ubiquitous as the lipid bilayer membranes they act upon. Produced by all forms of life, most membrane permeabilizing peptides are used offensively or defensively against the membranes of other organisms. Just as nature has found many uses for them, translational scientists have worked for decades to design or optimize membrane permeabilizing peptides for applications in the laboratory and in the clinic ranging from antibacterial and antiviral therapy and prophylaxis to anticancer therapeutics and drug delivery. Here, we review the field of membrane permeabilizing peptides. We discuss the diversity of their sources and structures, the systems and methods used to measure their activities, and the behaviors that are observed. We discuss the fact that "mechanism" is not a discrete or a static entity for an MPP but rather the result of a heterogeneous and dynamic ensemble of structural states that vary in response to many different experimental conditions. This has led to an almost complete lack of discrete three-dimensional active structures among the thousands of known MPPs and a lack of useful or predictive sequence-structure-function relationship rules. Ultimately, we discuss how it may be more useful to think of membrane permeabilizing peptides mechanisms as broad regions of a mechanistic landscape rather than discrete molecular processes.

Threshold protective effect of deuterated polyunsaturated fatty acids on peroxidation of lipid bilayers

Autoxidation of polyunsaturated fatty acids (PUFAs) damages lipid membranes and generates numerous toxic by-products implicated in neurodegeneration, aging, and other pathologies. Abstraction of bis-allylic hydrogen atoms is the rate-limiting step of PUFA autoxidation, which is inhibited by replacing bis-allylic hydrogens with deuterium atoms (D-PUFAs). In cells, the presence of a relatively small fraction of D-PUFAs among natural PUFAs is sufficient to effectively inhibit lipid peroxidation (LPO). Here, we investigate the effect of various D-PUFAs on the stability of liposomes under oxidative stress conditions. The permeability of vesicle membranes to fluorescent dyes was measured as a proxy for bilayer integrity, and the formation of conjugated dienes was monitored as a proxy for LPO. Remarkably, both approaches reveal a similar threshold for the protective effect of D-PUFAs in liposomes. We show that protection rendered by D-PUFAs depends on the structure of the deuterated fatty acid. Our findings suggest that protection of PUFAs against autoxidation depends on the total level of deuterated bi-sallylic (CD₂ ) groups present in the lipid bilayer. However, the phospholipid containing 6,6,9,9,12,12,15,15,18,18-d₁₀ -docosahexaenoic acid exerts a stronger protective effect than should be expected from its deuteration level. These findings further support the application of D-PUFAs as preventive/therapeutic agents in numerous pathologies that involve LPO.

Biomembrane Permeabilization: Statistics of Individual Leakage Events Harmonize the Interpretation of Vesicle Leakage

The mode of action of membrane-active molecules, such as antimicrobial, anticancer, cell penetrating, and fusion peptides and their synthetic mimics, transfection agents, drug permeation enhancers, and biological signaling molecules (e.g., quorum sensing), involves either the general or local destabilization of the target membrane or the formation of defined, rather stable pores. Some effects aim at killing the cell, while others need to be limited in space and time to avoid serious damage. Biological tests reveal translocation of compounds and cell death but do not provide a detailed, mechanistic, and quantitative understanding of the modes of action and their molecular basis. Model membrane studies of membrane leakage have been used for decades to tackle this issue, but their interpretation in terms of biology has remained challenging and often quite limited. Here we compare two recent, powerful protocols to study model membrane leakage: the microscopic detection of dye influx into giant liposomes and time-correlated single photon counting experiments to characterize dye efflux from large unilamellar vesicles. A statistical treatment of both data sets does not only harmonize apparent discrepancies but also makes us aware of principal issues that have been confusing the interpretation of model membrane leakage data so far. Moreover, our study reveals a fundamental difference between nano- and microscale systems that needs to be taken into account when conclusions about microscale objects, such as cells, are drawn from nanoscale models.

Phosphatidylserine lipids and membrane order precisely regulate the activity of Polybia-MP1 peptide

Polybia-MP1 (IDWKKLLDAAKQIL-NH₂) is a lytic peptide from the Brazilian wasp venom with known anti-cancer properties. Previous evidence indicates that phosphatidylserine (PS) lipids are relevant for the lytic activity of MP1. In agreement with this requirement, phosphatidylserine lipids are translocated to the outer leaflet of cells, and are available for MP1 binding, depending on the presence of liquid-ordered domains. Here, we investigated the effect of PS on MP1 activity when this lipid is reconstituted in membranes of giant or large liposomes with different lipid-phase states. By monitoring the membrane and soluble luminal content of giant unilamellar vesicles (GUVs), using fluorescence confocal microscopy, we were able to determine that MP1 has a pore-forming activity at the membrane level. Liquid-ordered domains, which were phase-separated within the membrane of GUVs, influenced the pore-forming activity of MP1. Experiments evaluating the membrane-binding and lytic activity of MP1 on large unilamellar vesicles (LUVs), with the same lipid composition as GUVs, demonstrated that there was synergy between liquid-ordered domains and PS, which enhanced both activities. Based on our findings, we propose that the physicochemical properties of cancer cell membranes, which possess a much higher concentration of PS than normal cells, renders them susceptible to MP1 binding and lytic pore formation. These results can be correlated with MP1's potent and selective anti-cancer activity and pave the way for future research to develop cancer therapies that harness and exploit the properties of MP1.

Correlating antimicrobial activity and model membrane leakage induced by nylon-3 polymers and detergents

Most antimicrobial peptides act upon target microorganisms by permeabilizing their membranes. The mode of action is often assessed by vesicle leakage experiments that use model membranes, with the assumption that biological activity correlates with the permeabilization of the lipid bilayer. The current work aims to extend the interpretation of vesicle leakage results and examine the correlation between vesicle leakage and antimicrobial activity. To this end, we used a lifetime-based leakage assay with calcein-loaded vesicles to study the membrane permeabilizing properties of a novel antifungal polymer poly-NM, two of its analogs, and a series of detergents. In conjunction, the biological activities of these compounds against Candida albicans were assessed and correlated with data from vesicle leakage. Poly-NM induces all-or-none leakage in polar yeast lipid vesicles at the polymer's MIC, 3 μg mL(-1). At this and higher concentrations, complete leakage after an initial lag time was observed. Concerted activity tests imply that this polymer acts independently of the detergent octyl glucoside (OG) for both vesicle leakage and activity against C. albicans spheroplasts. In addition, poly-NM was found to have negligible activity against zwitterionic vesicles and red blood cells. Our results provide a consistent, detailed picture of the mode of action of poly-NM: this polymer induces membrane leakage by electrostatic lipid clustering. In contrast, poly-MM:CO, a nylon-3 polymer comprised of both cationic and hydrophobic segments, seems to act by a different mechanism that involves membrane asymmetry stress. Vesicle leakage for this polymer is transient (limited to <100%) and graded, non-specific among zwitterionic and polar yeast lipid vesicles, additive with detergent action, and correlates poorly with biological activity. Based on these results, we conclude that comprehensive leakage experiments can provide a detailed description of the mode of action of membrane permeabilizing compounds. Without this thorough approach, it would have been logical to assume that the two nylon-3 polymers we examined act via similar mechanisms; it is surprising that their mechanisms are so distinct. Some, but not all mechanisms of vesicle permeabilization allow for antimicrobial activity.

Single-vesicle detection and analysis of peptide-induced membrane permeabilization

The capability of membrane-active peptides to disrupt phospholipid membranes is often studied by investigating peptide-induced leakage of quenched fluorescent molecules from large unilamellar lipid vesicles. In this article, we explore two fluorescence microscopy-based single-vesicle detection methods as alternatives to the quenching-based assays for studying peptide-induced leakage from large unilamellar lipid vesicles. Specifically, we use fluorescence correlation spectroscopy (FCS) to study the leakage of fluorescent molecules of different sizes from large unilamellar lipid vesicles dispersed in aqueous solution, and we use confocal imaging of surface-immobilized large unilamellar lipid vesicles to investigate whether there are heterogeneities in leakage between individual vesicles. Of importance, we design an experimental protocol that allows us to quantitatively correlate the results of the two methods; accordingly, it can be assumed that the two methods provide complementary information about the same leakage process. We use the two methods to investigate the membrane-permeabilizing activities of three well-studied cationic membrane-active peptides: mastoparan X, melittin, and magainin 2. The FCS results show that leakage induced by magainin 2 is less dependent on the size of the encapsulated fluorescent molecules than leakage induced by mastoparan X and melittin. The confocal imaging results show that all three peptides induce leakage by a heterogeneous process in which one portion of the vesicles are completely emptied of their contents but another portion of the vesicles are only partially emptied. These pieces of information regarding leakage induced by mastoparan X, melittin, and magainin 2 could not readily have been obtained by the established assays for studying peptide-induced leakage from lipid vesicles.

Additive and synergistic membrane permeabilization by antimicrobial (lipo)peptides and detergents

Certain antibiotic peptides are thought to permeabilize membranes of pathogens by effects that are also observed for simple detergents, such as membrane thinning and disordering, asymmetric bilayer expansion, toroidal pore formation, and micellization. Here we test the hypothesis that such peptides act additively with detergents when applied in parallel. Additivity is defined analogously to a fractional inhibitory concentration index of unity, and the extent and mechanism of leakage is measured by the fluorescence lifetime-based vesicle leakage assay using calcein-loaded vesicles. Good additivity was found for the concerted action of magainin 2, the fungicidal lipopeptide class of surfactins from Bacillus subtilis QST713, and the detergent octyl glucoside, respectively, with the detergent C12EO8. Synergistic or superadditive action was observed for fengycins from B. subtilis, as well as the detergent CHAPS, when combined with C12EO8. The results illustrate two mechanisms of synergistic action: First, maximal leakage requires an optimum degree of heterogeneity in the system that may be achieved by mixing a graded with an all-or-none permeabilizer. (The optimal perturbation should be focused to certain defect structures, yet not to the extent that some vesicles are not affected at all.) Second, a cosurfactant may enhance the bioavailability of a poorly soluble peptide. The results are important for understanding the concerted action of membrane-permeabilizing compounds in biology as well as for optimizing formulations of such antimicrobials for medical applications or crop protection.

Mechanism of membrane permeation induced by synthetic β-hairpin peptides

We have investigated the membrane destabilizing properties of synthetic amphiphilic cationic peptides, MAX1 and MAX35, which have the propensity to form β-hairpin structures under certain conditions, and a control non-β-hairpin-forming peptide MAX8V16E. All three peptides bind to liposomes containing a mixture of zwitterionic POPC and negatively charged POPS lipids as determined by Zeta potential measurements. Circular dichroism measurements indicated folding of MAX1 and MAX35 in the presence of the POPC/POPS liposomes, whereas no such folding was observed with MAX8V16E. There was no binding or folding of these peptides to liposomes containing only POPC. MAX1 and MAX35 induced release of contents from negatively charged liposomes, whereas MAX8V16E failed to promote solute release under identical conditions. Thus, MAX1 and MAX35 bind to, and fold at the surface of negatively charged liposomes adopting a lytic conformation. We ruled out leaky fusion as a mechanism of release by including 2 mol % PEG-PE in the liposomes, which inhibits aggregation/fusion but not folding of MAX or MAX-induced leakage. Using a concentration-dependent quenching probe (calcein), we determined that MAX-induced leakage of liposome contents was an all-or-none process. At MAX1 concentrations, which cause release of ~50% of the liposomes that contain small (R(h) <1.5 nm) markers, only ~15% of those liposomes release a fluorescent dextran of 40 kDa. A multimeric model of the pore is presented based on these results. Atomistic molecular dynamics simulations show that barrels consisting of 10 β-hairpin MAX1 and MAX35 peptides are relatively more stable than MAX8V16E barrels in the bilayer, suggesting that barrels of this size are responsible for the peptides lytic action.

All-or-none membrane permeabilization by fengycin-type lipopeptides from Bacillus subtilis QST713

The fungicidal activity of Bacillus subtilis QST713 has been utilized for the highly effective and environmentally safe protection of crops against a variety of pathogens. It is based mainly on the production of cyclic lipopeptides of the fengycin (FEs), surfactin, and iturin families. The mixed population of native FEs forms micelles which solubilize individual FEs such as agrastatin 1 (AS1) that are otherwise rather insoluble on their own. Fluorescence lifetime-based calcein efflux measurements and cryo transmission electron microscopy show that these FEs show a unique scenario of membrane permeabilization. Poor miscibility of FEs with lipid probably promotes the formation of pores in 10% of the vesicles at only≈1μM free FE and in 15% of the vesicles at 10 μM. We explain why this limited, all-or-none leakage could nevertheless account for the killing of virtually all fungi whereas the same extent of graded vesicle leakage may be biologically irrelevant. Then, crystallization of AS1 and micellization of plipastatins cause a cut-off in leakage at 15% that might regulate the biological activity of FEs, protecting Bacillus and plant membranes. The fact that FE micelles solubilize only about 10 mol-% fluid lipid resembles the behavior of detergent resistance.

Configuration of polyisoprenoids affects the permeability and thermotropic properties of phospholipid/polyisoprenoid model membranes

The influence of α-cis- and α-trans-polyprenols on the structure and properties of model membranes was analyzed. The interaction of Ficaprenol-12 (α-cis-Prenol-12, α-Z-Prenol-12) and Alloprenol-12 (α-trans-Prenol-12, α-E-Prenol-12) with model membranes was compared using high performance liquid chromatography (HPLC), differential scanning calorimetry (DSC) and fluorescent methods. l-α-Phosphatidylcholine from egg yolk (EYPC) and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) as the main lipid components of unilamellar (SUVs) and multilamellar (MLVs) vesicles were used. The two-step extraction procedure (n-pentane and hexane, respectively) allowed to separately analyze the fractions of polyprenol as non-incorporated (Prenol(NonInc)) and incorporated (Prenol(Inc)) into liposomes. Consequently, distribution coefficients, P', describing the equilibrium of prenol content between phospholipid (EYPC) membrane and the aqueous phase gave different logP' for α-cis- and α-trans-Prenol-12, indicating that the configuration of the α-terminal residue significantly alters the hydrophobicity of the polyisoprenoid molecule and consequently the affinity of polyprenols for EYPC membrane. In fluorescence experiments α-trans-Pren-12 increased up to 1.7-fold the permeability of EYPC bilayer for glucose while the effect of α-cis-Pren-12 was almost negligible. Considerable changes of thermotropic behavior of DPPC membranes in the presence of both prenol isomers were observed. α-trans-Pren-12 completely abolished the pretransition while in the case of α-cis-Pren-12 it was noticeably reduced. Furthermore, for both prenol isomers, the temperature of the main phase transition (T(m)) was shifted by about 1°C to lower values and the height of the peak was significantly reduced. The DSC analysis profiles also showed a new peak at 38.7°C, which may suggest the concomitant presence of more that one phase within the membrane. Results of these experiments and the concomitant occurrence of alloprenols and ficaprenols in plant tissues suggest that cis/trans isomerization of the α-residue of polyisoprenoid molecule might comprise a putative mechanism responsible for modulation of the permeability of cellular membranes.

A lipocentric view of peptide-induced pores

Although lipid membranes serve as effective sealing barriers for the passage of most polar solutes, nonmediated leakage is not completely improbable. A high activation energy normally keeps unassisted bilayer permeation at a very low frequency, but lipids are able to self-organize as pores even in peptide-free and protein-free membranes. The probability of leakage phenomena increases under conditions such as phase coexistence, external stress or perturbation associated to binding of nonlipidic molecules. Here, we argue that pore formation can be viewed as an intrinsic property of lipid bilayers, with strong similarities in the structure and mechanism between pores formed with participation of peptides, lipidic pores induced by different types of stress, and spontaneous transient bilayer defects driven by thermal fluctuations. Within such a lipocentric framework, amphipathic peptides are best described as pore-inducing rather than pore-forming elements. Active peptides bound to membranes can be understood as a source of internal surface tension which facilitates pore formation by diminishing the high activation energy barrier. This first or immediate action of the peptide has some resemblance to catalysis. However, the presence of membrane-active peptides has the additional effect of displacing the equilibrium towards the pore-open state, which is then maintained over long times, and reducing the size of initial individual pores. Thus, pore-inducing peptides, regardless of their sequence and oligomeric organization, can be assigned a double role of increasing the probability of pore formation in membranes to high levels as well as stabilizing these pores after they appear.

Pores formed by Baxα5 relax to a smaller size and keep at equilibrium

Pores made by amphipathic cationic peptides (e.g., antimicrobials and fragments of pore-forming proteins) are typically studied by examining the kinetics of vesicle leakage after peptide addition or obtaining structural measurements in reconstituted peptide-lipid systems. In the first case, the pores have been considered transient phenomena that allow the relaxation of the peptide-membrane system. In the second, they correspond to equilibrium structures at minimum free energy. Here we reconcile both approaches by investigating the pore activity of the α5 fragment from the proapoptotic protein Bax (Baxα5) before and after equilibrium of peptide/vesicle complexes. Quenching assays on suspensions of large unilamellar vesicles suggest that in the presence of Baxα5, the vesicles maintain a leaky state for hours under equilibrium conditions. We proved and analyzed stable pores on single giant unilamellar vesicles (GUVs) in detail by monitoring the entrance of dyes added at different times after incubation with the peptide. When the GUVs came in contact with Baxα5, leakage started stochastically, was delayed for various periods of time, and in the majority of cases proceeded rapidly to completion. After hours in the presence of the peptide, the same individual GUVs that refilled completely at first instance maintained a porated state, which could be observed in subsequent leak-in events for serially added dyes. However, these long-term pores were smaller in size than the initial equilibration pores. Stable pores were also detected in GUVs made in the presence of Baxα5. The latter pores can be considered equilibrium states and may correspond to structures measured previously in bilayer stacks. Although pore formation may occur as a kinetic process, equilibrium pores may also be functionally relevant structures, especially in highly regulated systems such as the apoptotic mitochondrial pores induced by Bax.

Role of membrane lipids for the activity of pore forming peptides and proteins

Bilayer lipids, far from being passive elements, have multiple roles in polypeptide-dependent pore formation. Lipids participate at all stages of the formation of pores by providing the binding site for proteins and peptides, conditioning their active structure and modulating the molecular reorganization of the membrane complex. Such general functions of lipids superimpose to other particular roles, from electrostatic and curvature effects to more specific actions in cases like cholesterol, sphingolipids or cardiolipin. Pores are natural phenomena in lipid membranes. Driven by membrane fluctuations and packing defects, transient water pores are related to spontaneous lipid flip-flop and non-assisted ion permeation. In the absence ofproteins or peptides, these are rare short living events, with properties dependent on the lipid composition of the membrane. Their frequency increases under conditions of internal membrane disturbance of the lipid packing, like in the presence of membrane-bound proteins or peptides. These latter molecules, in fact, form dynamic supramolecular assemblies together with the lipids and transmembrane pores are one of the possible structures of the complex. Active peptides and proteins can thus be considered inducers or enhancers of pores which increase their probability and lifetime by modifying the thermodynamic membrane balance. This includes destabilizing the membrane lamellar structure, lowering the activation energy for pore formation and stabilizing the open pore structure.

Two disaccharides and trimethylamine N-oxide affect Abeta aggregation differently, but all attenuate oligomer-induced membrane permeability

Interaction between aggregates of amyloid beta protein (Abeta) and membranes has been hypothesized by many to be a key event in the mechanism of neurotoxicity associated with Alzheimer's disease (AD). Proposed membrane-related mechanisms of neurotoxicity include ion channel formation, membrane disruption, changes in membrane capacitance, and lipid membrane oxidation. Recently, osmolytes such as trehalose have been found to delay Abeta aggregation in vitro and reduce neurotoxicity. However, no direct measurements have separated the effects of osmolytes on Abeta aggregation versus membrane interactions. In this article, we tested the influence of trehalose, sucrose and trimethylamine-N-oxide (TMAO) on Abeta aggregation and fluorescent dye leakage induced by Abeta aggregates from liposomes. In the absence of lipid vesicles, trehalose and sucrose, but not TMAO, were found to delay Abeta aggregation. In contrast, all of the osmolytes significantly attenuated dye leakage. Dissolution of preformed Abeta aggregates was excluded as a possible mechanism of dye leakage attenuation by measurements of Congo red binding as well as hydrogen-deuterium exchange detected by mass spectrometry (HX-MS). However, the accelerated conversion of high order oligomers to fibril caused by vesicles did not take place if any of the three osmolytes presented. Instead, in the case of disaccharide, osmolytes were found to form adducts with Abeta, and change the dissociation dynamics of soluble oligomeric species. Both effects may have contributed to the observed osmolyte attenuation of dye leakage. These results suggest that disaccharides and TMAO may have very different effects on Abeta aggregation because of the different tendencies of the osmolytes to interact with the peptide backbone. However, the effects on Abeta membrane interaction may be due to much more general phenomena associated with osmolyte enhancement of Abeta oligomer stability and/or direct interaction of osmolyte with the membrane surface.

Membrane perturbation by the antimicrobial peptide PMAP-23: a fluorescence and molecular dynamics study

Several bioactive peptides exert their biological function by interacting with cellular membranes. Structural data on their location inside lipid bilayers are thus essential for a detailed understanding of their mechanism of action. We propose here a combined approach in which fluorescence spectroscopy and molecular dynamics (MD) simulations were applied to investigate the mechanism of membrane perturbation by the antimicrobial peptide PMAP-23. Fluorescence spectra, depth-dependent quenching experiments, and peptide-translocation assays were employed to determine the location of the peptide inside the membrane. MD simulations were performed starting from a random mixture of water, lipids and peptide, and following the spontaneous self-assembly of the bilayer. Both experimental and theoretical data indicated a peptide location just below the polar headgroups of the membrane, with an orientation essentially parallel to the bilayer plane. These findings, together with experimental results on peptide-induced leakage from large and giant vesicles, lipid flip-flop and peptide exchange between vesicles, support a mechanism of action consistent with the "carpet" model. Furthermore, the atomic detail provided by the simulations suggested the occurrence of an additional, more specific and novel mechanism of bilayer destabilization by PMAP-23, involving the unusual insertion of charged side chains into the hydrophobic core of the membrane.

Controllable biomolecule release from self-assembled organic nanotubes with asymmetric surfaces: pH and temperature dependence

The release behavior of fluorescent dyes, oligo DNAs and spherical proteins from self-assembled organic nanotubes having 7-9 nm inner diameters has been studied in terms of novel nanocontainers with high-axial ratios. Both much smaller inner diameters and asymmetric inner and outer surfaces are characteristic of the nanotubes. The acid-dissociation constant (pKa) of the amino groups located at the inner surface and the thermal phase transition temperature (Tg-l) of the nanotube were evaluated based on the pH titration and variable-temperature circular dichroism (CD) spectroscopic experiments, respectively. Each guest was slowly released from both open ends of the nanotube under weak alkaline conditions (pH 8.5), as a result of the decrease in electrostatic attraction between the inner surface and the guests. Elevated temperatures above the obtained Tg-l converted the monolayer membrane of the nanotube from a solid state to a fluid one, promoting the remarkably fast release of the guests. The unique release properties of the nanotube as a nanocontainer with two terminal open ends were compared with those of liposomes that posses a closed hollow space covered with fluid bilayer membranes.

Carboxyfluorescein Leakage from Poly(ethylene glycol)-Grafted Liposomes Induced by the Interaction with Serum

The effects of fetal bovine serum (FBS) on carboxyfluorescein (CF) leakage from poly(ethylene glycol)-grafted liposomes (PEG-liposomes) were investigated. PEG-liposomes were prepared from dipalmitoylphosphatidylcholine (DPPC) and distearoyl-N-monomethoxy poly(ethylene glycol)-succinyl-phosphatidylethanolamines (DSPE-PEG) having PEG molecular weights of 1000, 2000, 3000 and 5000. The presence of FBS dramatically increased CF leakage from liposomes near the gel-liquid crystalline phase transition temperature, but had little effect at lower and higher temperatures. The CF leakage from PEG-liposomes whose molecular weight in PEG units was above 2000 was suppressed compared with that of liposomes without PEG. And, there was hardly any difference in the effect of the PEG molecular weight of the PEG-lipids on CF leakage from PEG-liposomes with FBS when PEG-lipids with a molecular weight in PEG units above 2000 were used. On the other hand, the leakage of CF from liposomes containing 0.145 mol fractions of DSPE-PEG1000 was larger than that of liposomes without PEG. Furthermore, the effects of FBS on the cooperative units of lipid molecules during the gel-liquid crystalline phase transition of liposomes were examined. However, the cooperative units of liposomes with FBS had little change compared with that of liposomes without FBS.

Direct visualization of membrane leakage induced by the antibiotic peptides: maculatin, citropin, and aurein

Membrane lysis caused by antibiotic peptides is often rationalized by means of two different models: the so-called carpet model and the pore-forming model. We report here on the lytic activity of antibiotic peptides from Australian tree frogs, maculatin 1.1, citropin 1.1, and aurein 1.2, on POPC or POPC/POPG model membranes. Leakage experiments using fluorescence spectroscopy indicated that the peptide/lipid mol ratio necessary to induce 50% of probe leakage was smaller for maculatin compared with aurein or citropin, regardless of lipid membrane composition. To gain further insight into the lytic mechanism of these peptides we performed single vesicle experiments using confocal fluorescence microscopy. In these experiments, the time course of leakage for different molecular weight (water soluble) fluorescent markers incorporated inside of single giant unilamellar vesicles is observed after peptide exposure. We conclude that maculatin and its related peptides demonstrate a pore-forming mechanism (differential leakage of small fluorescent probe compared with high molecular weight markers). Conversely, citropin and aurein provoke a total membrane destabilization with vesicle burst without sequential probe leakage, an effect that can be assigned to a carpeting mechanism of lytic action. Additionally, to study the relevance of the proline residue on the membrane-action properties of maculatin, the same experimental approach was used for maculatin-Ala and maculatin-Gly (Pro-15 was replaced by Ala or Gly, respectively). Although a similar peptide/lipid mol ratio was necessary to induce 50% of leakage for POPC membranes, the lytic activity of maculatin-Ala and maculatin-Gly decreased in POPC/POPG (1:1 mol) membranes compared with that observed for the naturally occurring maculatin sequence. As observed for maculatin, the lytic action of Maculatin-Ala and maculatin-Gly is in keeping with the formation of pore-like structures at the membrane independently of lipid composition.

Alteration in the Temperature-Dependent Content Release Property of Thermosensitive Liposomes in Plasma

The effect of plasma components on the temperature-dependent content release property of thermosensitive liposomes has been described. Temperature-sensitive liposomes containing mitomycin C (MMC) were prepared from dipalmitoylphosphatidylcholine (DPPC liposomes) and a 7 : 3 mixture of DPPC and dipalmitoylophosphatidylglycerol (DPPC/DPPG liposomes). We defined in this study the difference in the content release between 38 degrees C and 44 degrees C as an index of the temperature-dependent content release efficiency (Delta% release). In the absence of rat plasma, the Delta% release of the DPPC liposomes and the DPPC/DPPG liposomes was 83% and 71%, respectively. However, when the release study was conducted with rat plasma, the Delta% release increased to about 96% for both liposomes. In addition, while the DPPC liposomes were destabilized by rat plasma below the gel-to-liquid crystalline phase transition temperature (T(m)), MMC leakage from the DPPC/DPPG liposomes below T(m) was suppressed by rat plasma. Moreover, the plasma protein binding onto lipid bilayer was concomitant with the gel-to-liquid crystalline phase transition and then enhanced the temperature-dependent release from the DPPC/DPPG liposomes. The possible mechanism of interaction between liposomes and plasma proteins, especially serum albumin, was discussed based on differential scanning calorimetry and protein binding experiments.

Apolipoprotein E4 potentiates amyloid beta peptide-induced lysosomal leakage and apoptosis in neuronal cells

We assessed the isoform-specific effects of apolipoprotein (apo) E on the response of Neuro-2a cells to the amyloid beta peptide (Abeta1-42). As determined by the intracellular staining pattern and the release of beta-hexosaminidase into the cytosol, apoE4-transfected cells treated with aggregated Abeta1-42 showed a greater tendency toward lysosomal leakage than neo- or apoE3-transfected cells. Abeta1-42 caused significantly greater cell death and more than 2-fold greater DNA fragmentation in apoE4-secreting than in apoE3-secreting or control cells. H2O2 or staurosporine enhanced cell death and apoptosis in apoE4-transfected cells but not in apoE3-transfected cells. A caspase-9 inhibitor abolished the potentiation of Abeta1-42-induced apoptosis by apoE4. Similar results were obtained with conditioned medium from cells secreting apoE3 or apoE4. Cells preincubated for 4 h with a source of apoE3 or apoE4, followed by removal of apoE from the medium and from the cell surface, still exhibited the isoform-specific response to Abeta1-42, indicating that the potentiation of apoptosis required intracellular apoE, presumably in the endosomes or lysosomes. Studies of phospholipid (dimyristoylphosphatidylcholine) bilayer vesicles encapsulating 5-(and-6)-carboxyfluorescein dye showed that apoE4 remodeled and disrupted the phospholipid vesicles to a greater extent than apoE3 or apoE2. In response to Abeta1-42, vesicles containing apoE4 were disrupted to a greater extent than those containing apoE3. These findings are consistent with apoE4 forming a reactive molecular intermediate that avidly binds phospholipid and may insert into the lysosomal membrane, destabilizing it and causing lysosomal leakage and apoptosis in response to Abeta1-42.

Characterization of flavonoid--biomembrane interactions

The flavonoids comprise a large group of polyphenolic compounds that are ubiquitous in vegetables, berries, and fruits, and they have been shown to possess antioxidative activity. The interactions between flavonoids and membranes composed of dipalmitoylphosphatidylcholine (DPPC) have been studied by means of noncovalent immobilized artificial membrane (IAM) chromatography. We have also investigated flavonoid-induced calcein release from fluid egg phosphatidylcholine (EPC) vesicles. Flavonoids with more hydroxyl groups showed longer retention delays in the IAM studies, suggesting stronger interactions between the flavonoids, which are rich in hydroxyl groups, and the DPPC membrane interface. We also observed an inverse correlation between the number of hydroxyl groups in the flavonoids and their capacity to induce calcein leakage through fluid EPC bilayer membranes (the more nonpolar flavonoids caused more calcein leakage). Rhamnetin and morin, however, both showed marked activity for the DPPC membrane interface and caused significant membrane leakage. Both polar and nonpolar forces were shown to have a significant impact on the flavonoid/biomembrane interactions.

Pore-forming action of mastoparan peptides on liposomes: a quantitative analysis

We have investigated the wasp venom peptides mastoparan X and polistes mastoparan regarding their apparent potential to induce pore-like defects in phosphatidylcholine unilamellar vesicles. Based on a fundamental theoretical model, the pore activation and deactivation kinetics have been evaluated from the observed efflux of liposome entrapped carboxyfluorescein in relation to the bound peptide to lipid ratio. We can quantitatively describe our experimental data very well in terms of a specific reaction scheme resulting in only a few short-lived pores. They evidently emerge rapidly from a prepore nucleus being produced by two rate-limiting monomeric states of bound peptide. These peculiar states would be favorably populated in an early stage of bilayer perturbation, but tend to die out in the course of a peptide/lipid restabilization process.

A highly membrane-active peptide in Flock House virus: implications for the mechanism of nodavirus infection

BACKGROUND

Nodaviruses are among the simplest animal viruses, and are therefore attractive systems for deconvoluting core viral processes such as assembly, infection and uncoating. Membrane translocation of the single-stranded RNA genome of nodaviruses has been proposed to be mediated by direct lipid-protein interactions between a post-assembly autocatalytic cleavage product from the capsomere and the target membrane. To probe the validity of this hypothesis, we have synthesized a 21-residue Met-->Nle (norleucine) variant of the amino-terminal helical domain (denoted here as gamma1) of the cleavage peptide in Flock House nodavirus (FHV) and studied its ability to alter membrane structure and function.

RESULTS

The synthetic peptide gamma1 increases membrane permeability to hydrophilic solutes, as judged by fluorescence experiments with liposome-encapsulated dyes and ion-conductance measurements. Furthermore, peptide orientation and location within lipid bilayers was determined using tryptophan-fluorescence-quenching experiments and attenuated total reflectance infrared spectroscopy.

CONCLUSIONS

The helical domain of the FHV cleavage product partitions spontaneously into lipid bilayers and increases membrane permeability, consistent with the postulated mechanism for viral genome translocation. The existence of a membrane-binding domain in the FHV cleavage sequence suggests peptide-triggered disruption of the endosomal membrane as a prelude to viral uncoating in the host cytoplasm. A model for this interaction is proposed.

Effect of cholesterol and charge on pore formation in bilayer vesicles by a pH-sensitive peptide

The effect of cholesterol on the bilayer partitioning of the peptide GALA (WEAALAEALAEALAEHLAEALAEALEALAA) and its assembly into a pore in large unilamellar vesicles composed of neutral and negatively charged phospholipids has been determined. GALA undergoes a conformational change from a random coil to an amphipathic alpha-helix when the pH is reduced from 7.0 to 5.0, inducing at low pH leakage of contents from vesicles. Leakage from neutral or negatively charged vesicles at pH 5.0 was similar and could be adequately explained by the mathematical model (Parente, R. A., S. Nir, and F. C. Szoka, Jr., 1990. Mechanism of leakage of phospholipid vesicle contents induced by the peptide GALA. Biochemistry. 29:8720-8728) which assumed that GALA becomes incorporated into the vesicle bilayer and irreversibly aggregates to form a pore consisting of 10 +/- 2 peptides. Increasing cholesterol content in the membranes resulted in a reduced efficiency of the peptide to induce leakage. Part of the cholesterol effect was due to reduced binding of the peptide to cholesterol-containing membranes. An additional effect of cholesterol was to increase reversibility of surface aggregation of the peptide in the membrane. Results could be explained and predicted with a model that retains the same pore size, i.e., 10 +/- 2 peptides, but includes reversible aggregation of the monomers to form the pore. Resonance energy transfer experiments using fluorescently labeled peptides confirmed that the degree of reversibility of surface aggregation of GALA was significantly larger in cholesterol-containing liposomes, thus reducing the efficiency of pore formation.

Reversible surface aggregation in pore formation by pardaxin

The mechanism of leakage induced by surface active peptides is not yet fully understood. To gain insight into the molecular events underlying this process, the leakage induced by the peptide pardaxin from phosphatidylcholine/ phosphatidylserine/cholesterol large unilamellar vesicles was studied by monitoring the rate and extent of dye release and by theoretical modeling. The leakage occurred by an all-or-none mechanism: vesicles either leaked or retained all of their contents. We further developed a mathematical model that includes the assumption that certain peptides become incorporated into the vesicle bilayer and aggregate to form a pore. The current experimental results can be explained by the model only if the surface aggregation of the peptide is reversible. Considering this reversibility, the model can explain the final extents of calcein leakage for lipid/peptide ratios of > 2000:1 to 25:1 by assuming that only a fraction of the bound peptide forms pores consisting of M = 6 +/- 3 peptides. Interestingly, less leakage occurred at 43 degrees C, than at 30 degrees C, although peptide partitioning into the bilayer was enhanced upon elevation of the temperature. We deduced that the increased leakage at 30 degrees C was due to an increase in the extent of reversible surface aggregation at the lower temperature. Experiments employing fluorescein-labeled pardaxin demonstrated reversible aggregation of the peptide in suspension and within the membrane, and exchange of the peptide between liposomes. In summary, our experimental and theoretical results support reversible surface aggregation as the mechanism of pore formation by pardaxin.